Scribd
Upload
189 views2 pages

ESPDesign - XLSX

This spreadsheet calculates parameters for selecting an electric submersible pump (ESP). It requires the user to input reservoir and fluid properties, as well as production parameters. It then calculates ESP selection criteria like minimum pump setting depth, pressure differential, pumping head, number of stages, and motor power requirement. However, the current input data results in error messages for the calculated values.

Uploaded by

XxMxX
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
189 views2 pages

ESPDesign - XLSX

This spreadsheet calculates parameters for selecting an electric submersible pump (ESP). It requires the user to input reservoir and fluid properties, as well as production parameters. It then calculates ESP selection criteria like minimum pump setting depth, pressure differential, pumping head, number of stages, and motor power requirement. However, the current input data results in error messages for the calculated values.

Uploaded by

XxMxX
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

ESPdesign-US Field Units.

xls
Description: This spreadsheet calculates parameters for ESP selection.
Instruction: 1) Update parameter values in the Input Data and Solution sections; and 2) view result in the Solution section.
Input Data:
Reservoir depth (D): 10000 ft
Reservoir pressure (pbar): 3500 psia
AOF in Vogel equation for IPR (qmax): 1500 stb/day
Production fluid gravity (gL): 0.865 1 for H2O
Formation volume factor of production liquid (BL): 1.25 rb/stb
Tubing inner diameter (dti): 2.992 in.
Well head pressure (pwh): 100 psia
Required pump suction pressure (psuction): 200 psia
Desired production rate (qLd): 8000 stb/day

Solution:
Desired bottom hole pressure from IPR (pwfd) = Err:502 psia
Desired production rate at pump (qLd) = 10000 bbl/day
Input here the minimum capacity of selected pump (qLp): 10000 bbl/day
Minimum pump setting depth (Dpump) = Err:502 ft
Input pump setting depth (Dpump): 9800 ft
Pump suction pressure (psuction) = Err:502 psia
Input pump discharge pressure (pdischarge): 3728 psia
Required pump pressure differential (Dp) = Err:502 psia
Required pumping head (h) = Err:502 ft H2O
Input pumping head per stage of the selected pump (hs): 60 ft/stage
Input horse power per stage of the selected pump (hps): 6 hp
Input efficiency of the selected pump (Ep): 0.72
Required number of stages (Ns) = Err:502
Total motor power requirement (hpmotor) = Err:502 hp
ult in the Solution section.

You might also like