Scribd
Upload
56 views2 pages

Serial Adapter: EN 50121-4 EN 61000-6-1 EN 61000-6-2 EN 61000-6-4

The EDW-100 is a serial to Ethernet converter designed to allow RS-232, RS-422 and RS-485 serial devices to communicate via TCP/IP Ethernet networks. It is designed for use in harsh industrial environments with a wide operating temperature range, transient protection, and robust components. The EDW-100 supports various protocols including UDP, TCP, and Modbus and has special modes for complex applications. It is compliant with various industrial EMC, isolation, vibration and shock standards suitable for heavy industrial and rail applications.

Uploaded by

MBJSK
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
56 views2 pages

Serial Adapter: EN 50121-4 EN 61000-6-1 EN 61000-6-2 EN 61000-6-4

The EDW-100 is a serial to Ethernet converter designed to allow RS-232, RS-422 and RS-485 serial devices to communicate via TCP/IP Ethernet networks. It is designed for use in harsh industrial environments with a wide operating temperature range, transient protection, and robust components. The EDW-100 supports various protocols including UDP, TCP, and Modbus and has special modes for complex applications. It is compliant with various industrial EMC, isolation, vibration and shock standards suitable for heavy industrial and rail applications.

Uploaded by

MBJSK
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Serial Adapter

EDW-100
……Easy to install and use
•  Purpose built DIN rail casing with integral clip
•  Extensive LED and Telnet diagnostics
•  Web and DIP switch configuration
……Designed for use in harsh industrial applications
•  Dual 10 – 60  VDC power input
•  Total galvanic isolation & transient protection
•  RS-422/485 termination and fail safe
……Robust for long service life
•  1,000,000 hours MTBF to MIL-HDBK-217K
•  –25 to +70°C (–13 to +158°F) with no moving parts
•  Industrial EMC, shock and vibration testing
……Comprehensive legacy to IP solution
•  UDP,   TCP client and  TCP server with packing algorithm
•  Modbus TCP to RTU/ASCII gateway
•  Special modes for hardware handshake and resilience

EN 50121-4 EN 61000-6-1 EN 61000-6-2 EN 61000-6-4


Railway Trackside Residential Immunity Industrial Immunity Industrial Emission

The EDW-100 is a serial to Ethernet converter designed to allow RS-232, RS-422 and RS-485 serial devices to
communicate via TCP/IP Ethernet networks. DIP switches are used for configuration of RS-422/485 as well as for Ethernet
port settings; the password protected web interface is used for all other settings. Diagnostic information can be accessed
via a Telnet session with more basic information offered on LEDs.
The EDW-100 is designed for use in heavy duty industrial applications.  The wide power range, galvanic isolation, transient
protection and the design of the termination and fail safe guarantees communication in the worst environments.
Only industrial grade components are used which gives the EDW-100 an MTBF of 1,000,000 hours and ensures a long
service life.  A wide operating temperature range of –25 to +70°C (–13 to +158°F) can be achieved with no moving parts.
The EDW-100 has been tested both by Westermo and external test houses to meet many EMC, isolation, vibration and
shock standards, all to the highest levels suitable for heavy industrial environments and rail trackside applications.
The EDW-100 supports UDP,  TCP client and TCP server connections between units or to a PC virtual COM port. It also
has an array of special modes, including Single Client Mode, Dual TCP Connection, DSR Connection, RST on TCP Closure,
RTS Control, Break Signalling and Last Calling allowing the unit to be used in a wide range of complex applications.
The Modbus TCP gateway implementation in the EDW-100 supports Modbus RTU and Modbus ASCII in both master
and slave modes.

Ordering Information
Art.no Description
3616-0020 EDW-100 UDP/TCP Ext temp
3125-0001 PS-30, Power supply, DIN mounted (Accessories)

EDW-100_1603_EN_REV. A
Specifications EDW-100
Dimensional drawing
121,1

113,6

34,1

41,5
123,4

Dimension W x H x D 34 x 123 x 121 mm (1.33 x 4.84 x 4.76 in)


Weight 0.2 kg
Degree of protection IP21

Power
Operating voltage 10 to 60  VDC
Rated current 250 mA @ 12 VDC
125 mA @ 24 VDC
  63 mA @ 48 VDC

Interfaces
RS-422/485 1 x 4-position detachable screw terminal, 300 bit/s to 115.2 kbit/s
RS-232 1 x 9-pin D-sub, 300 bit/s to 115.2 kbit/s
Ethernet 1 x RJ-45, 10 Mbit/s or 100 Mbit/s

Temperature
Operating –25 to +70ºC (–13 to +158ºF)
Storage & Transport –40 to +70ºC (–40 to +158ºF)

Agency approvals and standards compliance


EMC EN 61000-6-1, Immunity residential environments
EN 61000-6-2, Immunity industrial environments
EN 61000-6-4, Emission industrial environments
EN 50121-4, Railway signalling and telecommunications apparatus
IEC 62236-4, Railway signalling and telecommunications apparatus
Safety UL/CSA/IEC/EN 60950-1, IT equipment

EDW-100_1603_EN_REV. A

You might also like