Scribd
Upload
223 views1 page

Aerox Restarting The Engine

The document describes the conditions for activating and deactivating a vehicle's Stop and Start system. The system will activate when the switch is set to on, the engine is warmed up, and the vehicle travels over 10 km/h. It will stop the engine automatically when the vehicle stops and throttle is closed. To restart the engine, turn the throttle while it is stopped. The system can be turned off by setting the switch to off.

Uploaded by

alvin me
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
223 views1 page

Aerox Restarting The Engine

The document describes the conditions for activating and deactivating a vehicle's Stop and Start system. The system will activate when the switch is set to on, the engine is warmed up, and the vehicle travels over 10 km/h. It will stop the engine automatically when the vehicle stops and throttle is closed. To restart the engine, turn the throttle while it is stopped. The system can be turned off by setting the switch to off.

Uploaded by

alvin me
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

UBF6EYE0.

book Page 2 Friday, July 14, 2017 3:39 PM

Stop and Start System (GDR155-A)


3. When the vehicle confirms that the
following conditions are met, the
Stop and Start System activates A

and the Stop and Start System in- A

dicator light comes on.


 The Stop and Start System
switch is set to “ A ”.
 After the engine was warmed 1 2
up, the engine was left idling
for a certain period of time. 1. On
5  The vehicle has traveled at a TIP 2. Flashing
speed of 10 km/h or higher. To preserve battery power, the Stop
and Start System may not activate.
A

EAU76831
A
Stop the engine
After the “ A ” indicator light on the
multi-function meter comes on, the en-
gine stops automatically when the en-
gine is left idling when the vehicle is
A stopped and the throttle grip is in the
fully closed position.
4. To turn off the Stop and Start Sys- At this time, the “ A ” indicator light on EAU76703

tem, set the Stop and Start Sys- Restart the engine
the multi-function meter starts flashing
tem switch to “ A ”. If you turn the throttle grip while the
to indicate that the engine is currently
Stop and Start System indicator light is
stopped by the Stop and Start System.
flashing and the engine is stopped, the
engine restarts automatically and
the “ A ” indicator light stops flashing.

5-2

You might also like