CURICULUM VITAE

SAURABH GANDHI
Mob. +91 9929823809
Email-Id: [email protected]
Career Objective
 To work in a challenging and creative environment and passionately contribute towards the goals
of the Organization. To contribute the “Best Individual Efforts” in achieving Organizational Goal and
to have continuous self & group enhancement by the way of learning and exposure through New
Assignments.
“Nurture to Excel” looking for a Senior challenging assignment in Automation, Instrumentation and
Control management with a MNC of repute to utilize acquired expertise to deliver best-in-class
results.

Professional Summary
 Currently working as Deputy Manager-Instrumentation in Grasim Industries Limited, Nagda
(ABG) from July, 2021 to present and joined organization as an Asst. Manager - Instrumentation
from July, 2017.
 Previously working through Aarvi Encon Pvt. Ltd. as Instrumentation Engineer (O&M) in
Reliance Industries Limited, Jamnagar from January, 2017 to June, 2017.
 Maintenance professional with career success of 2+ years in steering diverse functional domains as
experience in Control and Instrumentation Dept. at M/s. Godawari Power And Ispat ltd. (Hira
Group), Raipur (CG.) – comprising of power plant of capacity 30 MW x 1, 25MW x1,10MW
x2,China make and Triveni Steam Turbines from September, 2013 to January, 2016 .
 Good Understanding of Project Management Methodologies and strategies.
 Proven expertise in 85MW unit with ABB (Freelance); Yokogawa DCS Centum CS1000 &
Centum VP & Siemens S7 300 PLC for Ash Handling system.
 Rich experience in maintenance of AFBC & WHR Boilers and China made Turbine, Yokogawa
CO Analyser systems embedded with Allen Bradley PLC, Forbes Marshall Steam and Water
Analysis System & Online Gas Analyser of M/s. Prima Equipment.
 Successfully exhibited excellence in facilitating cost effective maintenance strategies.
 Good Understanding for carrying Safety Audit.
 Working in projects like Green field and Brown field industries.

Professional Career
1. Presently working in Grasim Industries Limited (A unit of Aditya Birla Group), Nagda (MP) as a
Deputy Manager-Instrumentation looking after Instrumentation Maintenance in Spinning Machine,
Recovery Plant and CS2/Acid manufacturing unit in Staple fiber division.
Job Profile:
 Calibration & Measurements and Testing of Control Valves, Transmitters and also VFD checking work.
 Overhauling work of instruments installed in Spinning machines as a project work.
 Inspection of instruments by ITP checklist.
 Experience in control logic development and programming in Yokogawa DCS Centum VP as trained
from Yokogawa India Limited, Bangalore.
 Doing Inspection of the inward materials as per the purchase order.
 Handling CAPEX schemes related jobs.
 Modification jobs, Batch process, HMI up gradation, VFD (ABB, Danfoss) troubleshooting.
 Handling CS2 & Acid process control instruments.
 Handling of Software and Hardware of Electronic devices in Chillers (York) and Compressor (Atlas
Copco)
 Handling of Software and Hardware of Vapour Absorption Machine.
 Working on project related to Packaging unit troubleshooting guide and sensor indication on HMI
overview and also with safety perception for ease in working on shop floor.
 Experience in Aspentech MIS software to develop MIS reports and collect data required for optimization
of process.
 Project undergoing for Installation & Commissioning of Instruments in Zero Liquid Discharge plant.
  KAIZEN / Project completion of batch process i.e. dye mixing tank; safety interlocks for mechanical
equipments; new fibre manufacturing named Dye Catcher fibre, Short-cut fibre; Filtration process of Spin
Bath and Sump zone solution, Installation of CCTV with recording and big size display indicator in field
as of important parameters.
 Project of CSR: 1. Automatic Sanitizer Spray 2. Automatic prototype ventilator of low cost.

2. Previously working in Reliance Industries Ltd, Jamnagar (J-3 Project) in Air separation unit which
has World’s largest Oxygen / Nitrogen Separation plant through Aarvi Encon Pvt. Ltd, Mumbai as an
Instrumentation Engineer from Jan-2017 to June-2017.
Key Skills:
 Control system such as PLC, DCS, SCADA, Allen Bradley PLC, Siemens S7 300 PLC, Automation,
VFD, etc.
 Field Instruments like LT, PT, FT, TT (Rosemount, Yokogawa) and DVC type Control Valve (Fisher),
SVI-II type Control Valve (Masoneilan), I/P Convertors, Positioners, etc.
 FF (Foundation Fieldbus) Protocol, “475 Fieldbus Communicator (HART)”, Scandura (WIKA) for FT,
PT, LT Calibrator, TK-3e for Vibration Calibrator
 Petrochemical Refinery By-product Recovery Project.
Job Profile:
 Calibration & Testing of Digital Valve Control (DVC) types of Control Valves
 Calibration & Measurements of TT, PT, LT, FT through “475 Fieldbus Communicator (HART)” and
Scandura
 Hot/Cold loop checking as the cables laid down for instruments
 Inspection of instruments by ITP checklist
 Doing Inspection of the inward materials as per the purchase order
 Impulse tubes are checking through Hook up drawing.

3. Instrumentation & Control Engineer at M/s. Godawari Power and Ispat ltd. (Hira Group), Raipur
(CG.)
Key Skills & Roles & Responsibilities:
 Periodic checking of the system whether it is running properly or not.
 If required to change the logics with associated Engineers.
 In emergency time to force digital as well as analog parameters.
 Periodically checking of all the Pressure, Flow, Level Transmitters and if required calibrate it.
 Flow Measurement using Siemens Clamp On-Ultrasonic Flow meter.
 Working on Load Management System having Rockwell Automation RSLogix 5000.
 Done all control wiring.
 Checking of RTD & Thermocouple
 Calibration of Pressure gauges, Temperature gauges & Pressure switches.
 Hydrasteps for Boiler Drum level.
 Handled all Pneumatic Control Valve (MIL) and Motorized Valve (Auma, Rotark).
 Responsible for Trouble Free Working of all field Instruments, DCS and PLC.
 Working on SAP PM/MM Module and ERP also.
 Working on Online GAS Analyser (Prima Equipment), its maintenance and calibration work.

4. Training with hands on working in different industries based on National Certificate of Automation
Professional from NeoCreativeVisionTechnology, Vadodara.
Duration: February 2016 to November 2016

 Programming Allen Bradley, Siemens, Delta, Mitsubishi, ABB PLCs and troubleshooting.
 Creating new application with Wonder ware, Siemens S/W for various process/application & creating
alarms, events real-time & historical time trending, M.I.S reports and its communication with hardware
i.e. PLCs, controllers, HMI’s.
 Configured Human Machine Devices of TP170 Mono of Siemens, E 910 of Beijer make.
 AC Drives of Schneider Altivar 312, Bonfiglioli and Motor Controlling and wiring.
 Panel designing for PCC/MCC etc. Application with knowledge for DOL/ Start Delta Starters,
knowledge for Control and power circuit Diagram as well GA Diagram.
  Networking and Data Acquisition of PLC to SCADA can use various Protocols like RS232, RS485, in
AB DH+, DH485, in Siemens PPI & MPI, Profibus, Modbus etc.
 Can work for Programming, networking, and installation of Process Automation devices for On Line
monitoring, controlling with total data acquisition.
Working on different projects of Industries based on Software Training:–
 Wonder wares in touch 7.1, 8.0 & 9.0. (SCADA S/W)
 Siemens Win cc (SCADA S/W)
 Simatic ProTool (HMI S/W)
 E Designer ( HMI S/W )
 AC31 Graf and CP Programmer for ABB PLC Family
 Step7 Microwin 32 for S7-200 Hardware Family.
 Melsec GX Developer for Mitsubishi Hardware Family
 Rs Logix 500, Rs Linx for Allen Bradley Hardware Family
 WPL Soft for Delta PLC Family.
 CT Soft S/W of Crompton Greaves for AC Drive Configuration

Scholastics

 06/2019: MBA in Operation Management with 61% from IGNOU, Delhi

 12/2018: PG Diploma in Operation Management with 60% from IGNOU, Delhi.
 06/2018: PG Diploma in Management with 59% from IGNOU, Delhi.
 06/2017: Diploma in Management with 60% from IGNOU, Delhi.
 05/2013: Graduated with 65% in B.TECH (Electronics Instrumentation and Control
Eng.) from Global Institute of Technology, Jaipur (Raj.) i.e. RTU, Kota (Raj.).
 Intermediate: Passed with 67.9 % marks from Central Academy School, Kota in CBSE.
(2009)
 Matriculation: Passed with 69.3 % marks from ABPS, Kharach, Dist: Bharuch (Guj.) in CBSE.
(2007)

Personal Dossier
 Name : Saurabh Gandhi
 Date of Birth : 15th March 1991
 Languages Known : English, Hindi and Gujarati.
 Marital Status : Married
 Permanent Address : c/o Birla Cellulosic (A unit of Grasim Industries Ltd.)
Narmada Colony, Birladham, Kharach, Kosamba (R.S.),
Dist: -Bharuch (Guj.)-394120
 Present Address : 21/3, Grasim Staff Colony, Birlagram, Nagda (MP)-456331
 Mobile No. : +91 9929823809
 Email Id : [email protected] / [email protected]

Declaration

 I hereby declare that the above mentioned information is correct up to my knowledge and I bear the
responsibility for the correctness of the above mentioned particulars.
 I shall be thankful for applying to join your company. I also assure to be always Result Oriented through
Superb interpersonal skills during tenure with your Organization.

Saurabh Gandhi
Nagda, Madhya Pradesh