Field Transmitters and

Process Instrumentation
Solutions Guide

Industrial Automation Solutions

www.ti.com/automation 2013
Field Transmitters & Process Instrumentation Solutions Guide
Table of Contents

Introduction
Table of Contents
Monitoring and maintaining process
variables at the appropriate levels Sensor Signal Conditioning
is extremely critical in industrial 3 Temperature Transmitter
automation and process control. A 4 Pressure Transmitter
sensor in the industrial environment 5 Flow Transmitter
is either continuously or periodically 6 Gas Transmitter
measuring vital parameters such as 7 Photoelectric Sensor
temperature, pressure, flow, etc. The 8 Analog Switches
primary challenge of sensing in industrial
8 Current Excitation
environments is conditioning low signal
8 Current Shunt Monitors
levels in the presence of high noise and
high-surge voltage. 8 Temperature Sensor ICs

Texas Instruments (TI) has a broad Embedded Processing

portfolio of products catering to 9 MSP430™ Ultra-Low-Power MCU
industrial sensing, ranging from best- 9 ARM® Processors
in-class precision amplifiers and data 9 Safety Processors
converters to interface products, 9 Digital Signal Processing (DSP)
power products, and high performance
microprocessors. TI’s cutting-edge Interface
semiconductor manufacturing processes 10 Integrated DAC and 4–20mA Transmitter
provide industrial designers with 10 DAC
products that meet the highest standards 10 Interface Amplifier
and that are optimized for industrial 10 IO-Link
environments and extend product life 11 4–20mA Transmitter
cycles. 11 RS-485
11 CAN
TI offers a wide range of Enhanced 12 Ethernet PHY
Products for Industrial systems that 12 Power over Ethernet (PoE)
must perform in harsh environments. 12 Wireless Connectivity
To learn more, please visit: 12 Isolation
www.ti.com/extendedtemp 12 ESD / EMI Protection
TI has automotive grade, wide Power Management Solutions
input voltage power management 13 Linear Regulators
products with features suitable for 13 Voltage References
safety applications. 13 System Timer
To learn more, please visit: 14 Switching Regulators
www.ti.com/automotive
TI Designs / PowerLab™ Reference Designs
TI has expanded packaging options 16 Simple Thermocouple Measurement
with the additional availability to 16 Gas Sensor Platform with BLE
bare die. 16 Bridge Sensor Signal Conditioner with Current Loop
To learn more, please visit: 16 4–20mA Current Loop 2-wire Sensor Power Supply
www.ti.com/die

2 | Field Transmitters and Process Instrumentation Solutions Guide 2013 Texas Instruments
Sensor Signal Conditioning
Temperature Transmitters

Temperature transmitters, most

commonly made by using resistance V/I

temperature detectors (RTD) or thermo-

LCD
Display ° On/Off
Keypad

couples, have a wide range of uses in Filtering

LCD

industrial automation. A constant and RTD

or
Thermistor
Backlight Integrated Solution

DAC 4-20mA
linear excitation source is a critical Current
Source

aspect of RTD sensing, while cold MUX AMP ADC MCU Isolation
RS-232/RS-485

junction compensation is the key to a Integrated Solution

Profibus

IO Link
good temperature measurement with +
Filtering
Antenna

thermocouples. TI offers a variety of high

-
Thermocouple Wireless

integration, high accuracy, and excellent Battery O Line O Loop

resolution analog front end devices to Battery

Powered R Powered R Powered

Power Management
address these sensors.
LEGEND Logic
Processor Power
Interface ADC/DAC
RF/IF Clocks
Amplifier Other

Temperature Transmitter Signal Conditioning

Resolution Sample Input Supply Operating Temp. Pin / Approx.
(bits) Rate (SPS) Channels Interface Voltage (V) Features EVM Range (°C) Package Price (US$)
Analog Front Ends (AFE)
Continuous Background
LMP90080/79/78/77 16 214 7/4 Serial SPI 2.85 to 5.5 Calibration, LMP90100EB -40 to 125 28HTSSOP 2.33 | 1ku
Current Sources
Continuous Background
LMP90100/99/98/97 24 214 7/4 Serial SPI 2.85 to 5.5 Calibration, Current LMP90100EB -40 to 125 28HTSSOP 2.86 | 1ku
Sources
Sigma-Delta ADCs (Thermocouple)
Temp. Sensor (0.5°C 10VSSOP,
ADS1018 12 3300 4 Serial SPI 2 to 5.5 ADS1118EVM -40 to 125 1.15 | 1ku
accurate) 10X2QFN
Temp. Sensor (0.5°C 10VSSOP,
ADS1118 16 860 4 Serial SPI 2 to 5.5 ADS1118EVM -40 to 125 2.30 | 1ku
accurate) 10X2QFN
Sigma-Delta ADCs (RTD and Thermocouples)
Serial SPI 2.7 to 5.25 Single cycle settling, GPIOs, 28TSSOP,
ADS1148 16 2000 7 True bipolar, Temp. Sensor ADS1148EVM -40 to 105 3.95 | 1ku
32VQFN
Serial SPI 2.7 to 5.25 Single cycle settling, GPIOs, ADS1248EVM-
ADS1248 24 2000 7 -40 to 105 28TSSOP 4.95 | 1ku
True bipolar, Temp. Sensor PDK
Single cycle settling, 16TSSOP,
ADS1220 24 2000 4 Serial SPI 2.3 to 5.5 ADS1220EVM -40 to 125 3.95 | 1ku
sensor, IDACs 16VQFN

Slew Rate CMRR Offset Offset Drift Operating

Vs (Min) Vs (Max) Number of GBW (Typ) (Typ) (Typ) Iq per ch. Voltage (Typ) Temp. Range Approx. Price
(V) (V) Channels (MHz) (V/µs) (dB) (Max) (mA) (Max) (mV) (µV/°C) (°C) Pin / Package (US$)
Amplifiers
LPV521 1.6 5.5 1 0.0062 0.0024 102 0.0004 1 0.4 -40 to 125 5SC70 0.49 | 1ku
5SOT-23, 8SOIC,
OPA188/2188/4188 4 36 1/2/4 2 0.8 146 0.51 0.025 0.03 -40 to 125 0.80 | 1ku
8VSSOP
5SC70, 5SOT-23,
OPA376/2376/4376 2.2 5.5 1/2/4 5.5 2 90 0.95 0.005 0.26 -40 to 125 0.65 | 1ku
8SOIC
LMP2011/2 2.7 5 1/2 3 4 130 1.2 0.06 0.015 -40 to 125 5SOT-23, 8SOIC 0.90 | 1ku
*Quantities of 1,000 begin at this suggested resale price in U.S. dollars. New products are listed in bold red.

Texas Instruments Field Transmitters and Process Instrumentation Solutions Guide 2013 | 3
Sensor Signal Conditioning
Pressure Transmitters

Pressure transmitters, most commonly

built from strain gauges, are essential Logic Cum Cubic Feet

in many process control applications Integrated Solution Integrated Solution

such as weight, level, force, or flow. Nonlinear

Bridge
Linearization
Circuit
VREF
DAC 4-20mA

The primary challenges of pressure Pressure Transducer DAC

RS-232/RS-485

transmitters are nonlinearity, temperature MUX AMP ADC MCU Isolation

Profibus

IO Link

dependent, a large offset, and a large +125ºC

TMP Antenna
Wireless
offset drift. Texas Instruments offers T
ADC

several high precision analog +40ºC

Battery O Line O Loop

front end devices that address these

Powered R Powered R Powered

Power Management

design challenges.

LEGEND Logic
Processor Power
Interface ADC/DAC
RF/IF Clocks
Amplifier Other

Pressure Transmitter Signal Conditioning

Resolution Sample Input Supply Operating Temp. Pin / Approx.
(bits) Rate (SPS) Channels Interface Voltage (V) Features EVM Range (°C) Package Price (US$)
Analog Front Ends (AFE)
Continuous Background
LMP90080/79/78/77 16 214 7/4 Serial SPI 2.85 to 5.5 Calibration, LMP90100EB -40 to 125 28HTSSOP 2.33 | 1ku
Current Sources
Continuous Background
LMP90100/99/98/97 24 214 7/4 Serial SPI 2.85 to 5.5 Calibration, Current LMP90100EB -40 to 125 28HTSSOP 2.86 | 1ku
Sources

Vs (Min) Vs (Max) Operating Temp. Approx. Price

(V) (V) GBW (Typ) (MHz) Features EVM Range (°C) Pin / Package (US$)
Programmable Analog Signal Conditioners
Digital Calibration, Programmable Gain 10VSON,
PGA308 2.7 5.5 2 PGA308EVM -40 to 125 1.85 | 1ku
& Offset, Power-On Reset OTP bank 10VSSOP
PGA309 2.7 5.5 2 PGA308 plus Temp Compensation PGA309EVM-USB -40 to 125 16TSSOP 2.95 | 1ku
PGA400-EP -5.5 16 — Sensor signal conditioning w/MCU PGA400Q1EVM -40 to 125 36VQFN 4.50 | 1ku

Resolution Sample Input Supply Power 50/60Hz Operating Temp. Pin / Approx.
(bits) Rate (SPS) Channels Interface Voltage (V) (Typ) (mW) Reject Features EVM Range (°C) Package Price (US$)
Sigma-Delta ADCs
Low side bridge switch, Pin
ADS1131 18 80 1 Serial 2.7 to 5.3 5 Yes ADS1131REF -40 to 85 20TSSOP 5.60 | 1ku
control, Input EMI filter
ADS1231/ Pin control (no registers),
24 80 1/2/4 Serial SPI 2.7 to 5.3 5 / 4.3 / 4.3 Yes ADS1231REF -40 to 85 16SOIC 2.50 | 1ku
2/4 offset calibration
Single cycle settling, 16TSSOP,
ADS1220 24 2000 4 Serial SPI 2.3 to 5.5 0.4 Yes ADS1220EVM -40 to 125 3.95 | 1ku
Temp. Sensor 16VQFN

Offset Offset Drift Operating

Vs (Min) Vs (Max) Number of GBW (Typ) Slew Rate CMRR (Typ) Iq per ch. Voltage (Typ) Temp. Range Approx. Price
(V) (V) Channels (MHz) (Typ) (V/µs) (dB) (Max) (mA) (Max) (mV) (µV/°C) (°C) Pin / Package (US$)
Amplifiers
5SOT-23, 5SC70,
OPA333/2333 1.8 5.5 1/2 0.35 0.16 130 0.025 0.01 0.02 -40 to 125 0.95 | 1ku
8SOIC
5DSBGA, 5SC70,
OPA330 1.8 5.5 1 0.35 0.16 115 0.035 0.05 0.02 -40 to 125 0.70 | 1ku
5SOT-23, 8SOIC
5SC70, 5SOT-23,
OPA317/2317 1.8 5.5 1/2 0.3 0.15 108 0.035 0.1 0.05 -40 to 125 0.55 | 1ku
8SOIC
INA333 1.8 5.5 1 0.15 0.16 100 0.05 0.025 0.1 -40 to 125 8SON, 8VSSOP 1.80 | 1ku
OPA378 2.2 5.5 1 0.9 0.4 112 0.15 0.05 0.1 -40 to 125 5SC70, 5SOT-23 0.70 | 1ku
LMP2021/2 2.2 5.5 1/2 5 2.6 139 1.1 0.005 0.004 -40 to 125 5SOT-23, 8SOIC 1.00 | 1ku
*Quantities of 1,000 begin at this suggested resale price in U.S. dollars. New products are listed in bold red.

4 | Field Transmitters and Process Instrumentation Solutions Guide 2013 Texas Instruments
Sensor Signal Conditioning
Flow Transmitters

Flow meters, consisting of many different Integrated Solution

architectures such as electromagnetic DAC 4-20mA

and Coriolis, are critical measuring instru- ADC Processor Isolation

RS-232/RS-485
ments used to measure liquid or gas flow Flow
Profibus

in an industrial automation plant. Some Driver IO Link

of the design challenges for flow meters The Magnetic-Inductive Flowmeter
Wireless
are low noise, high speed, and tempera-
ture compensation. Texas Instruments Integrated Solution
offers a variety of highly integrated DAC 4-20mA

simultaneous sampling or delta-sigma ADC Processor Isolation

converters to meet your analog front RS-232/RS-485

Profibus
end needs.
Flow

IO Link
Driver
ADC Wireless

The Coriolis Flowmeter

Line O Loop
Powered R Powered

LEGEND Logic
Power Management Processor Power
Interface ADC/DAC
RF/IF Clocks
Amplifier Other

Flow Transmitter Signal Conditioning

Supply Operating
Resolution Sample Rate Input Voltage Power Supports Temp. Range Pin / Approx.
(bits) (kSPS) Channels Interface (V) (Typ) (mW) Input Daisy Chain EVM (°C) Package Price (US$)
SAR ADCs
Single Ended
ADS7253/7853/ 1000 / 1000 4.75 to 16QFN,
12/14/16 2 Serial SPI 45 and Pseudo- No ADS8353EVM-PDK -40 to 125 3.50 | 1ku
8353 / 700 5.25 16TSSOP
Differential
ADS7254/7854/ 1000 / 1000 4.75 to 16QFN,
12/14/16 2 Serial SPI 45 Differential No ADS8354EVM-PDK -40 to 125 4.00 | 1ku
8354 / 700 5.25 16TSSOP
1000 / 680 / Serial SPI 2.7 to 3.6 5.5 / 4.2 / Pseudo- 10VSSOP,
ADS8860/2/4/6 16 1 Yes ADS8860EVM-PDK -40 to 85 5.00 | 1ku
400 / 100 2.6 / 0.7 Differential 10SON
1000 / 680 / Serial SPI 2.7 to 3.6 5.5 / 4.2 / Truly- 10VSSOP,
ADS8861/3/5/7 16 1 Yes ADS8861EVM-PDK -40 to 85 5.50 | 1ku
400 / 100 2.6 / 0.7 Differential 10SON
1000 / 680 / Serial SPI 2.7 to 3.6 5.5 / 4.2 / Truly- 10VSSOP,
ADS8881/3/5/7 18 1 Yes ADS8881EVM-PDK -40 to 85 7.95 | 1ku
400 / 100 2.6 / 0.7 Differential 10SON

Resolution Sample Input Supply Power (Typ) Operating Temp. Pin / Approx.
(bits) Rate (kSPS) Channels Interface Voltage (V) (mW) SNR (dB) EVM Range (°C) Package Price (US$)
Sigma-Delta ADCs
ADS1174 16 52 4 Serial SPI 5 135 97 ADS1174EVM-PDK -40 to 85 64HTQFP 6.00 | 1ku
ADS1251/2 24 20 / 41 1 Serial SPI 5 7.5 / 40 — — -40 to 85 8SOIC 5.99 | 1ku
ADS131E04/6/8 24 64 4/6/8 Serial SPI 2.7 to 5.25 8 / 12 / 16 107 ADS131E08EVM-PDK -40 to 105 64TQFP 3.95 | 1ku
ADS1274 24 144 4 Serial SPI 5 275 111 ADS1274EVM-PDK -40 to 125 64HTQFP 14.65 | 1ku

Offset Offset Drift Operating

Vs (Min) Vs (Max) Number of GBW (Typ) Slew Rate CMRR (Typ) Iq per ch. Voltage (Typ) Temp. Range Approx. Price
(V) (V) Channels (MHz) (Typ) (V/µs) (dB) (Max) (mA) (Max) (mV) (µV/°C) (°C) Pin / Package (US$)
Amplifiers
5SOT-23, 5SC70,
OPA333/2333 1.8 5.5 1/2 0.35 0.16 130 0.025 0.01 0.02 -40 to 125 0.95 | 1ku
8SOIC
8SOIC, 8SON,
INA826 2.7 36 1 1 1 115 0.25 0.15 2 -40 to 125 1.10 | 1ku
8VSSOP
16TSSOP / 10QFN,
THS4532/31A 2.5 5.5 1/2 36 220 116 0.25 0.4 3 -40 to 125 1.45 | 1ku
8SOIC, 8VSSOP
OPA836/2836 2.5 5.5 1/2 205 560 116 1 0.4 1.1 -40 to 125 10QFN, 6SOT-23 0.90 | 1ku
8SOT-23, 8SOIC,
OPA140 4.5 36 1 11 20 140 2 0.12 0.35 -40 to 125 1.55 | 1ku
8VSSOP
*Quantities of 1,000 begin at this suggested resale price in U.S. dollars. New products are listed in bold red. Preview products are listed in bold teal.

Texas Instruments Field Transmitters and Process Instrumentation Solutions Guide 2013 | 5
Sensor Signal Conditioning
Gas Transmitters

Gas sensing is a critical component of

monitoring safety and process perfor-
mance in a multitude of applications H25
0 PPM
ranging from building automation, oil and VREF VDD Integrated Solution

gas process industries, portable toxic gas

SCL
LMP91000 I2C
DAC 4-20mA
3-Lead Interface SDA
& Control
detectors, etc. One common mechanism Electrochemical
Cell
CE +
Variable
Bias
VREF
Divider
Registers MENB
A1_
used to measure gas is a 3 lead electro-
RS-232/RS-485

CE MCU Profibus
RE
chemical cell. Texas Instruments offers RE DGND Isolation
Temp
WE Sensor IO Link

several analog front end devices that WE +

TIA
_
VOUT
ADC Antenna

support a wide variety of gases including

RLoad Wireless
RTIA

CO2, H2S, CO, and O2. C1 C2 AGND

Battery O Line O Loop
Powered R Powered R Powered
Battery
Power Management

LEGEND Logic
Processor Power
Interface ADC/DAC
RF/IF Clocks
Amplifier Other

Gas Transmitter Signal Conditioning

Gas Sensitivity Input Supply Operating Temp. Pin / Approx. Price
range Channels Interface Voltage (V) Application EVM Range (°C) Package (US$)
Analog Front Ends (AFE)
Configurable AFE Potentiostat for
LMP91000/2 0.5 to 9500 nA/ppm 1 Serial I2C 2.7 to 5.25 LMP91000EVM -40 to 85 14WSON 1.80 | 1ku
Electrochemical Gas Sensing
167 to 7986 V/V Configurable AFE for Nondispersive LMP90150SDEVAL 10VSSOP /
LMP91050/1 1/2 Serial SPI 2.7 to 5.5 -40 to 85 1.25 | 1ku
programmable gain Infrared (NDIR) Sensing 14TSSOP

Resolution Sample Input Supply Power Operating Temp. Pin / Approx.

(bits) Rate (kSPS) Channels Interface Voltage (V) (Typ) (mW) Features EVM Range (°C) Package Price (US$)
Sigma-Delta ADCs
Serial SPI / 10VSSOP,
ADS1118/15 16 0.86 4 2 to 5.5 0.3 Temp. Sensor ADS1115EVM-PDK -40 to 125 2.30 | 1ku
Serial I2C 10X2QFN
Single cycle settling, 16TSSOP,
ADS1220 24 2 4 Serial SPI 2.3 to 5.5 0.4 ADS1220EVM -40 to 125 3.95 | 1ku
temp. sensor; iDACs 16VQFN
ADS1259 24 14.4 1 Serial SPI 5 13 Single cycle settling ADS1259EVM-PDK -40 to 105 20TSSOP 5.60 | 1ku

Offset Offset Drift Operating

Vs (Min) Vs (Max) Number of GBW (Typ) Slew Rate CMRR (Typ) Iq per ch. Voltage (Typ) Temp. Range Approx. Price
(V) (V) Channels (MHz) (Typ) (V/µs) (dB) (Max) (mA) (Max) (mV) (µV/°C) (°C) Pin / Package (US$)
Amplifiers
OPA314 1.8 5.5 1 3 1.5 96 0.21 0.5 1 -40 to 125 5SC70, 5SOT-23 0.30 | 1ku
OPA376 2.2 5.5 1 5.5 2 90 0.95 0.025 0.26 -40 to 125 5SC70, 5SOT-23 0.65 | 1ku
8SOIC, 5SOT-23,
OPA140 4.5 36 1 11 20 140 2 0.12 0.35 -40 to 125 1.55 | 1ku
8VSSOP
*Quantities of 1,000 begin at this suggested resale price in U.S. dollars. New products are listed in bold red.

6 | Field Transmitters and Process Instrumentation Solutions Guide 2013 Texas Instruments
Sensor Signal Conditioning
Photoelectric Sensors

Photoelectric sensors are used in

many industrial applications including
detecting objects, distinguishing changes
in a surface, and acting as an alarm
for abnormalities in a process control
environment. The primary design chal-
lenges are Transimpedance gain, band-
width, and noise. Texas Instruments
offers a variety of high precision
Transimpedance amplifiers that address
these design challenges.

Learn more about the WEBENCH®

Photodiode Sensor Designer at:
www.ti.com/webench.

Photoelectric Sensor Signal Conditioning

Resolution Sample Rate Input Supply Power Operating Temp. Pin / Approx.
(bits) (kSPS) Channels Interface Voltage (V) (Typ) (mW) EVM Range (°C) Package Price (US$)
SAR ADCs
ADC122S101 12 1000 2 Serial SPI, QSPI, Serial I/O 2.7 to 5.25 4.3 SP1202S03RB-PCB -40 to 85 8VSSOP 1.94 | 1ku
ADS7253/7853/ 1000 / 1000 16QFN,
12 / 14 / 16 2 Serial SPI 4.75 to 5.25 45 ADS8353EVM-PDK -40 to 125 3.50 | 1ku
8353 / 700 16TSSOP
ADS7254/7854/ 1000 / 1000 16QFN,
12 / 14 / 16 2 Serial SPI 4.75 to 5.25 45 ADS8354EVM-PDK -40 to 125 4.00 | 1ku
8354 / 700 16TSSOP
ADS7945 14 2000 2 Serial SPI 2.7 to 5.5 10.5 ADS7945EVM-PDK -40 to 85 16WQFN 3.95 | 1ku
1000 / 680 / 400 5.5 / 4.2 / 10VSSOP,
ADS8881/3/5/7 18 1 Serial SPI 2.7 to 3.6 ADS8881EVM-PDK -40 to 85 7.95 | 1ku
/ 100 2.6 / 0.7 10SON

Offset Voltage Bias Offset Drift Operating

Vs (Min) Vs (Max) @ 25°C (Max) Current GBW (Typ) (Typ) Slew Rate Iq per ch. Temp. Range Approx. Price
(V) (V) (mV) (Max) (pA) (MHz) (µV/°C) (Typ) (V/µs) (Max) (mA) (°C) Pin / Package (US$)
Amplifiers
LMP7721 1.8 5.5 0.15 0.02 17 1.5 10.5 1.7 -40 to 125 8SOIC 4.70 | 1ku
LMV791 1.8 5 1.35 1 17 1 9.5 1.75 -40 to 125 6SOT 0.60 | 1ku
LMV861 2.7 5.5 1 0.1 31 0.7 18 2.84 -40 to 125 5SC70 0.65 | 1ku
LMV793 1.8 5 1.65 0.1 88 -1 24 1.15 -40 to 125 5SOT-23, 8SOIC 0.45 | 1ku
OPA320 1.8 5.5 0.15 0.2 20 1.5 10 1.45 -40 to 125 5SOT-23, 6SOT-23 0.80 | 1ku
OPA657 8 12 2.6 2 (Typ) 1600 12 700 16.3 -40 to 85 5SOT-23, 8SOIC 7.14 | 1ku
OPA381 2.7 5.5 0.025 3 18 0.03 12 1 -40 to 125 8SON, 8VSSOP 0.75 | 1ku
OPA314 1.8 5.5 2.5 10 3 1 1.5 0.21 -40 to 125 5SC70, 5SOT-23 0.30 | 1ku
6SC70 / 8SOIC /
LMV601/2/4 2.7 5.5 4 200 1 1.7 1 0.17 -40 to 125 0.20 | 1ku
14SOIC
OPA847 10 12 0.1 – 3900 1.5 950 18.9 -40 to 85 8SOIC, 6SOT-23 2.00 | 1ku
*Quantities of 1,000 begin at this suggested resale price in U.S. dollars. New products are listed in bold red. Preview products are listed in bold teal

Texas Instruments Field Transmitters and Process Instrumentation Solutions Guide 2013 | 7
Sensor Signal Conditioning

Analog Switches
r_on (Typ) r_on Flatness v + (v) v + (v) HBM ESD ON Time OFF Time Operating Temp. Approx. Price
Configuration (ohms) (Typ) (ohms) min max Protection (kV) (Typ) (ns) (Typ) (ns) Range (°C) Pin / Package (US$)
5SC70, 5SOT-
TS5A3166 SPST 0.9 0.15 1.65 5.5 2 4.5 9 -40 to 85 0.22 | 1ku
23, 5DSBGA
TS5A3357 SP3T 2.5 6 1.65 5.5 2 6.5 3.7 -40 to 85 8US8, 8WCSP 0.59 | 1ku
TS5A4596 SPST 8 1.5 2.7 5.5 2 12 9 -40 to 85 5SC70, SOT-23 0.20 | 1ku

Current Shunt Monitors

Offset Drift Operating
Vs (Min) Vs (Max) CMRR (Min) Common Offset Voltage (Typ) Temp. Range Approx. Price
(V) (V) Iq (Max) (mA) (dB) Mode Range (Max) (mV) (µV/°C) EVM (°C) Pin / Package (US$)
INA226 2.7 5.5 0.33 126 0 to 36 0.01 0.02 INA226EVM -40 to 125 10VSSOP 1.40 | 1ku
INA282 2.7 18 0.9 120 -14 to 80 0.07 0.3 INA282-286EVM -40 to 125 8SOIC 1.25 | 1ku
LMP92064 4.5 5.5 — 110 -0.2 to 2 0.06 0.28 LMP92064EVM -40 to 105 16WSON 1.99 | 1ku

Temperature Sensor ICs

Vs Local Sensor
Vs (Min) (Max) Temp. Accuracy (Max) Sensor Gain Operating Temp. Pin / Approx. Price
Type (V) (V) Range (°C) (+/- °C) (mV/°C) Interface Feature EVM Range (°C) Package (US$)
10VSSOP,
ADS1018 ADC 2 5.5 -40 to 125 1 — SPI PGA, ADC ADS1118EVM -40 to 125 1.15 | 1ku
10X2QFN
Thermistor
LMT87 Analog 2.7 5.5 -50 to 150 2.7 -13.6 — LMT84-7EVM -50 to 150 5SC70 0.20 | 1ku
Alternative
Temp Sensor
LM57 Switch 2.4 5.5 -50 to 150 1.5 -5.16 to 12.92 — LM57B10EB -50 to 150 8WSON 0.65 | 1ku
and Switch
TMP102 Digital 2.7 5.5 -25 to 85 2 — I2C, SMBus Fault Queue TMP102EVM -40 to 125 6SOT 0.60 | 1ku
*Quantities of 1,000 begin at this suggested resale price in U.S. dollars. New products are listed in bold red.

WEBENCH® Design Center Saves Development Time and Cost

WEBENCH Design Center online design Analyze It—Solve your design problems
and prototyping tools put an award- before you prototype
winning online design environment right • Simulate your circuit and evalu-
at your fingertips. Design, optimize, ate performance using electrical and
generate your prototype and download thermal simulations.
your test vectors—all online. And you can • Simulate electrical characteristics,
do it all for free, anywhere, anytime. choose probe points and examine
waveforms to determine performance.
Select It—Choose from only those parts
• Simulate thermal behavior and your
that meet your specifications
circuit on a PCB in your defined envi-
• Input your design requirements.
ronment and view color heat maps.
• Choose a recommended part from a
• Overlay alternate circuits and compare
customized list.
results to get optimal performance.
Design It—Create your custom BOM
Build It—Save weeks getting your final
using readily available parts
design into production
• Tune your design quickly with the opti-
• Request samples and purchase parts
mization tool to balance design objec-
or demo boards.
tives for efficiency and footprint.
• Receive your custom prototyping kit
• Adjust components and use charts
the next business day.
to make design decisions on a wide
• Download your automatically gener-
selection of electrical characteristics.
ated CAD files, assembly details, test
• Exchange parts and use bill-of-mate-
instructions and complete performance
rials graphs for easy external compo-
results.
nent selection based on efficiency,
footprint, cost or vendors. Get more information: www.ti.com/webench

8 | Field Transmitters and Process Instrumentation Solutions Guide 2013 Texas Instruments
Embedded Processing

Microcontrollers and processors from Texas Instruments offer a broad

range of performance and power consumption options. Whether your
system needs the MSP430 MCU with ultra-low power consumption; the
C5000™ DSP platform with superior signal processing, an FFT accelera-
tor core, and low power architecture; the Sitara™ AM335x family with
integrated multi-protocol industrial communications support to connect
various kinds of sensors in real-time for better automation; TI is tailored to
meet your design challenges.
The MSP430™ MCU Value Line brings 16-bit performance, up to 16 MHz
operation, integrated intelligent peripherals, and ultra-low power at low-
cost 8-bit MCU prices to cost sensitive applications. Learn more at
www.ti.com/430value.

MSP430 Ultra-Low-Power MCU

Brown Real- USCI_A USCI_B Approx.
Frequency Flash FRAM SRAM Timers Out Watch- Time (UART/LIN/ (I2C & Operating Temp. Pin / Price
(MHz) (KB) (KB) (KB) GPIO 16-bit Reset dog Clock IrDA/SPI) SPI) ADC EVM Range (°C) Package (US$)
10-bit SAR, 8
ch + 3 24bit MSP- 80QFP, 3.25 |
MSP430F6736 25 128 — 8 72 4 Yes Yes Yes 3 1 -40 to 85
∑∆ ADC w/ FET430U100B 100QFP 1ku
PGA
MSP-
12-bit SAR, 3.35 |
MSP430FR5669 16 — 64 2 40 5 Yes Yes Yes 2 1 TS430RGZ -40 to 85 48VQFN
16 ch 1ku
48C
38TSSOP 2.50/
MSP430F2274/ 10-bit SAR, MSP-FET43 -40 to 85, -40
16 32 — 1 32 2 Yes Yes — 1 1 40VQFN 6.75 |
F2274-EP 12 ch 0U38 to 105 49DSBGA 1ku
16-bit ∑∆, MSP-FET43 48SSOP, 3.65 |
MSP430F4270 16 32 — 0.256 32 2 Yes Yes — — — 5ch. 12 bit -40 to 85
0U48 48VQFN 1ku
DAC, 1ch
MSP- 0DIESALE,
MSP430FR5739 24 — 16 10-bit SAR, 2.45 |
1 33 5 Yes Yes Yes 2 1 EXP430FR -40 to 85 38TSSOP,
14 ch. 1ku
5739 40VQFN
3 24 bit ∑∆ MSP-FET43 2.20 |
MSP430AFE253 12 16 — 0.512 11 1 Yes Yes — 1 — -40 to 85 24TSSOP
ADC with PGA 0U24 1ku
MSP430F2013/ -40 to 85, -40 to 14TSSOP, 1.10 |
16 2 — 0.125 10 1 Yes Yes — — — 16-bit ∑∆ 4 ch Z430F2013
F2013-EP 105, -40 to 125 16QFN 1ku

ARM® Processors
Frequency ARM MIPS
ARM CPU (MHz) (Max) (Max) Interfaces Supported IO Supply (V) EVM Pin / Package Approx. Price (US$)
TM4C1231C3PM ARM Cortex™-M4 80 100 DMIPS — 1.2, 3.3 EK-TM4C123GXL 64LQFP 2.30 | 1ku
AM1810 ARM9™ 375, 456 375, 456 PROFIBUS® 1.8, 3.3 MityARM-1810 361NFBGA 15.53 | 1ku
600, 1200, PROFIBUS®, EtherCAT®,
AM3356/3357/3359 ARM Cortex-A8 300, 600, 800 PROFINET®, POWERLINK 1.8, 3.3 TMDSICE3359 324NFBGA 12.40 | 1ku
1600

Safety Processors
Frequency Flash Data Flash RAM IO Supply Operating Temp. Approx. Price
ARM CPU (MHz) (Max) (KB) (KB) (KB) (V) Core Supply (V) EVM Range (°C) Pin / Package (US$)
RM42L432 ARM Cortex R4F 100 384 16 32 3.3 1.2 TMDXRM42HDK -40 to 105 100LQFP 5.81 | 1ku
RM46L450 ARM Cortex R4F 200 1024 64 128 3.3 1.2 TMDXRM46HDK -40 to 105 144LQFP 15.29 | 1ku
RM48L952 ARM Cortex R4F 220 3072 64 256 3.3 1.2 TMDXRM48HDK -40 to 105 144LQFP 24.20 | 1ku

Digital Signal Processing (DSP)

DSP Instruction Frequency (MHz) Hardware Approx. Price
DSP
Type (Max) DSP Peak MMACS Acceleration EVM Pin / Package (US$)
TMS320C5515 C55x Fixed Point 100, 120 200, 240 FFT Coprocessor TMDX5515EZDSP  196NFBGA 9.10 | 1ku
TMS320C6747 C674x Fixed/Floating-Point 375, 456 3000, 3648 — TMDSOSKL137 256PBGA 11.73 | 1ku
*Quantities of 1,000 begin at this suggested resale price in U.S. dollars.

Texas Instruments Field Transmitters and Process Instrumentation Solutions Guide 2013 | 9
Interface

Texas Instruments offers a comprehen-

sive interface portfolio enabling system
connectivity. With a variety of interface
standards such as the traditional analog
(4-20 mA) interface, HART®, RS-485,
IO-Link, and CAN, TI delivers a variety of
options for your interface needs.

Integrated DAC and 4–20mA Transmitters

Supply HART Operating
Resolution DAC: Voltage Power (Typ) compatible Temp. Approx. Price
(bits) Channels Interface Output Type (V) (mW) Tx type input EVM Range (°C) Pin / Package (US$)
DAC161S997/P997 16 1 SPI / SWI Current 2.7 to 3.6 0.33 / 0.5 2-wire Yes DAC161S997EVM -40 to 105 16WQFN 1.75 | 1ku
24HTSSOP,
DAC8750/7750 16 / 12 1 SPI Current 10 to 36 105 3-wire Yes DAC8760EVM -40 to 125 —
40VQFN
Current and 24HTSSOP,
DAC8760/7760 16 / 12 1 SPI 10 to 36 105 3-wire Yes DAC8760EVM -40 to 125 —
Voltage 40VQFN

DAC
Operating
Resolution DAC: Output Supply Power Settling Temp. Range Approx. Price
(bits) Channels Interface Type Voltage (V) (Typ) (mW) Time (µs) EVM (°C) Pin / Package (US$)
DAC7311/8311/ 12 / 14 / 16 1 Serial SPI Voltage 2 to 5.5 0.14 6 DAC7311EVM -40 to 125 6SC70 0.95 | 1ku
8411
DAC7551 12 1 Serial SPI Voltage 2.7 to 5.5 0.27 5 — -40 to 105 12USON 1.40 | 1ku
DAC121C081 12 1 Serial I2C Voltage 2.7 to 5.5 0.38 8.5 — -40 to 125 6SOT, 6WSON 1.15 | 1ku
DAC121S101 12 1 Serial SPI Voltage 2.7 to 5.5 0.64 8 DAC121S101EVAL -40 to 105 6SOT, 8VSSOP 1.15 | 1ku

Interface Amplifiers
GBW Slew Rate CMRR Iq per Offset Offset Drift
Vs (Min) Vs (Max) (Typ) (Typ) (V/ (Typ) ch. (Max) Voltage (Typ) Operating Temp. Approx. Price
(V) (V) (MHz) µs) (dB) (mA) (Max) (mV) (µV/°C) Range (°C) Pin / Package (US$)
OPA333 1.8 5.5 0.35 0.16 130 0.025 0.01 0.02 -40 to 125 5SOT-23, 5SC70, 8SOIC 0.95 | 1ku
OPA330 1.8 5.5 0.35 0.16 115 0.035 0.05 0.02 -40 to 125 5DSBGA, 5SC70, 5SOT-23, 8SOIC 0.70 | 1ku
0.55 | 1ku
OPA317 1.8 5.5 0.3 0.15 108 0.035 0.1 0.05 -40 to 125 5SC70, 5SOT-23, 8SOIC 0.75 | 1ku
OPA348 2.1 5.5 1 0.5 82 0.065 5 4 -40 to 125 5SC70, 5SOT-23, 8SOIC 0.20 | 1ku
OPA170 2.7 36 1.2 0.5 120 0.145 1.8 0.3 -40 to 125 5SOT, 5SOT-23, 8SOIC 0.40 | 1ku
OPA188 4 36 2 0.8 146 0.51 0.025 0.03 -40 to 125 5SOT-23, 8SOIC, 8VSSOP 0.80 | 1ku
OPA171 2.7 36 3 1.5 104 0.595 1.8 0.3 -40 to 125 5SC70, 5SOT-23, 8SOIC 0.40 | 1ku
OPA277 4 36 1 0.8 140 0.825 0.02 0.1 -40 to 85 8SOIC, 8VSON 1.05 | 1ku

IO-Link
Vs (min) Vs (Max) Peak Isolation Internal Operating Temp. Approx. Price
(V) (V) Rating (Vpk) Indicators Protection Reference EVM Range (°C) Pin / Package (US$)
Current Limit, Power- OVP, OCP, OTP,
SN65HVD101/2 9 36 50 Yes / No SN65HVD101EVM -40 to 105 20VQFN 2.50 | 1ku
Good, Remote Wake-up Reverse Polarity
*Quantities of 1,000 begin at this suggested resale price in U.S. dollars. New products are listed in bold red. Preview products are listed in bold teal

10 | Field Transmitters and Process Instrumentation Solutions Guide 2013 Texas Instruments
Interface

4–20mA Transmitters
Vs (Min) Vs (Max) Full Scale Input Non-Linearity Output Zero Span Error Offset Voltage Offset Drift Operating Temp. Pin / Approx. Price
(V) (V) Range (µA) (Max) (%) Error (Max) (µA) (Max) (%) (Max) (mV) (Typ) (µV/°C) Range (°C) Package (US$)
4-20mA Transmitter
XTR115/6 7.5 36 200 0.01 25 0.2 0.25 6 -55 to 125 8SOIC 1.25 | 1ku
8SON,
XTR117 7.5 40 250 0.02 50 0.4 0.5 6 -40 to 125 0.90 | 1ku
8VSSOP
XTR111 8 40 — 0.02 — 0.1 1.5 1.5 -55 to 125 10SON 0.65 | 1ku
XTR300 10 40 — 0.1 — 0.12 1.9 6 -55 to 125 20VQFN 1.90 | 1ku

Vs Full Scale Non- Output Zero Offset Offset Drift Operating

Vs (Min) (Max) Input Linearity Error (Max) Span Error Voltage (Typ) Sensor Temp. Range Pin / Approx.
Application (V) (V) Range (V) (Max) (%) (µA) (Max) (%) (Max) (mV) (µV/°C) Excitation (°C) Package Price (US$)
Analog Signal Conditioning and 4-20mA Transmitters
0.005 to
XTR108 RTD 7.5 24 0.01 50 (Typ) 1 (Typ) 0.05 0.1 two 500µA -55 to 125 24SSOP 3.35 | 1ku
0.32
XTR105/ two 800µA /
RTD 7.5 36 0.005 to 1 0.01 25 0.2 0.025 1.5 -40 to 85 14SOIC 4.00 | 1ku
12/14 250µA / 100µA
2.5V or 5V
XTR106 Strain Gauge 7.5 36 0.005 to 1 0.01 25 0.2 0.025 1.5 -55 to 125 14SOIC 4.00 | 1ku
reference

RS-485
Signaling
Isolated Integrated Rate ICC Supply Operating
# of Rating Transformer Number (Max) ESD (Max) Voltage Temp. Pin / Approx. Price
TX/RX (kVrms) Driver of Nodes Duplex (Mbps) (kV) Fail Safe (mA) (V) EVM Range (°C) Package (US$)
RS-485 (Profibus)
Idle, Open,
SN65HVD1176 1/1 — — 160 Half 40 10 6 5 — -40 to 85 8SOIC 1.55 | 1ku
Short
Idle, Open, 3.15 to
ISO1176 1/1 2.5 No 256 Half 40 16 10 ISO1176EVM -40 to 85 16SOIC 3.00 | 1ku
Short 5.5
Idle, Open,
ISO1176T 1/1 2.5 Yes 256 Half 40 10 18 3 to 5.5 ISO1176TEVM -40 to 85 16SOIC 3.30 | 1ku
Short

Signaling
Rate ICC Supply Operating
# of Common Number (Max) ESD (Max) Voltage Temp. Pin / Approx.
TX/RX Isolated Mode Range of Nodes Duplex (Mbps) (kV) Fail Safe (mA) (V) EVM Range (°C) Package Price (US$)
RS-485
8SOIC,
SN65HVD72/ 0.25 / 20 Idle, Open,
1/1 No -7 to 12 200 Half 16 0.95 3.3 SN65HVD72EVM -40 to 125 8SON, 0.70 | 1ku
75/78 / 50 Short 8VSSOP
Idle, Open,
SN65HVD82 1/1 No -7 to 12 256 Half 0.25 16 0.9 5 RS-485 HD EVM -40 to 85 8SOIC 1.00 | 1ku
Short
RS485-HF-DPLX-
SN65HVD888 1/1 No -7 to 12 256 Half 0.25 16 No 0.9 5 -40 to 85 8SOIC 1.10 | 1ku
EVM
Idle, Open,
SN65HVD3080E 1/1 No -7 to 12 256 Full 20 16 0.75 5 — -40 to 85 10VSSOP 1.20 | 1ku
Short

CAN
I/O and Operating
V_CC Short-Circuit HBM ESD Supply Current Temp. Range Pin / Approx.
Levels (V) Protection (V) Protection (kV) (Typ) (mA) Features EVM (°C) Package Price (US$)
“Turbo” CAN, “Ideal Passive”,
SN65HVD255 5 -27 to 40 12 10 SN65HVD255DEVM -40 to 125 8SOIC 0.50 | 1ku
V_RXD Level Shift
Isolated CAN (2.5kVRMS and
ISO1050 5 -27 to 40 4 10.3 ISO1050EVM -55 to 105 16SOIC, 8SOP 1.55 | 1ku
5kVRMS)
SN65HVD252 5 -27 to 40 12 13 DeviceNet CAN, with VREF — -40 to 85 8SOIC 0.80 | 1ku
*Quantities of 1,000 begin at this suggested resale price in U.S. dollars. New products are listed in bold red.

Texas Instruments Field Transmitters and Process Instrumentation Solutions Guide 2013 | 11
Interface

Ethernet PHY
Supply Cable ESD No. 25 MHz Cable Datarate Operating Temp. Pin / Approx.
Voltage (V) Interface Length (m) (kV) LEDs JTAG Clock Out Diagnostics (Mbps) EVM Range (°C) Package Price (US$)
TLK105/6 3.3 MII, RMII 150 16 1 No No No / Yes 10/100 TLK110CUSEVM -40 to 85 32QFN 0.99 | 1ku
TLK110 3.3 MII, RMII 150 16 3 Yes Yes Yes 10/100 TLK110CUSEVM -40 to 85 38LQFP 2.20 | 1ku

Power over Ethernet (PoE)

PD rDS(on) PoE
Power Duty per FET Driven/ PoE Current Inrush PoE Operating Approx.
Level Cycle Switching (typ) Active Limit (Min) Limity Standards Fault Temp. Range Pin / Price
(W) (%) Frequency UVLO (mOhms) Clamp (mA) (Typ) (mA) Supported Response EVM (°C) Package (US$)
802.3at 8SO
TPS2378 25 — — — 420 No 850 140 Auto Retry TPS2378EVM-105 -40 to 85
type 2  PowerPad 1.00 | 1ku
Programmable 802.3at
TPS23754 25 78 Unified 430 Yes 850 140 Auto Retry TPS23754EVM-420 -40 to 125 20HTSSOP 1.25 | 1ku
Synchronizable type1,2 
802.3at
TPS23751 25 85 Programmable Yes 450 No 850 140 Auto Retry TPS23751EVM-104 -40 to 85 16HTSSOP 1.10 | 1ku
type1,2 

Wireless Connectivity
Data Rx Tx Operating
Frequency Rate Operating Current Power Sensitivity Temp. Approx.
Device Range (Max) Voltage (Min) (Max) Modulation (Best) Additional Antenna Range Pin / Price
Type (GHz) (kbps) (V) (mA) (dBm) Techniques (dBm) Features Connection EVM (°C) Package (US$)
2-FSK, 2-GFSK  CC1120EMK-420-470
CC1120 Transceiver sub1-GHz 200 2 to 3.6 17 16 4-FSK, 4-GFSK  -123 — CC1120EMK-169,
Differential CC1120EMK-868-915 -40 to 85 5QFN
× 5 mm 2.20 |
MSK, ASK, OOK 32 1ku
CC1120EMK-998
CC2530 SoC 2.4 250 2 to 3.6 20.5 4.5 DSSS -97 MCU/ADC Differential CC2530DK -40 to 125 40QFN 3.20 |
1ku
CC2541 SoC 2.4 1000 2 to 3.6 17.9 0 GFSK -93 MCU/ADC Differential CC2541EMK -40 to 85 40VQFN 2.00 |
1ku
CC3000 Network 2.4 7000 2.7 to 4.8 92 18.3 DSSS, CCK, -97.5 Embedded Single CC3000EM -20 to 70 Module 9.99 |
MOD Processor OFDM TCP/IP stack ended CC3000BOOST 1ku

Isolation
Peak
Isolation Isolation Working Forward/ Speed Supply Propagation Operating Approx.
Rating Rating Voltage Reverse (Max) Voltage Default Delay (Typ) Integrated Temp. Pin / Price
(Vrms) (Vpk) (Vpk) Channels (Mbps) (V) Output (ns) Noise Filter EVM Range (°C) Package (US$)
ISO7421E/FE 2500 4000 560 1/1 50 3.3 to 5 High / Low 7 No ISO722XEVM -40 to 125 8SOIC 1.05 | 1ku
ISO7631FC/FM 2500 4000 1414 2/1 25/150 2.7 to 5 Low 17 / 7 No ISO723X724XEVM -40 to 125 16SOIC 1.75 | 1ku
ISO7131CC 2500 4242 560 2/1 50 2.7 to 5 High 23 Yes ISO71XXDBQ-EVM -40 to 125 16SSOP 1.75 | 1ku
ISO7140/1(F)CC 2500 4242 560 4/0, 3/1 50 2.7 to 5 High / Low 23 Yes ISO71XXDBQ-EVM -40 to 125 16SSOP 2.20 | 1ku

ESD/EMI Protection
IEC 61000-4-2 IEC 61000-4-2 Breakdown Operating
Contact (+/- Air-Gap (+/- Number of IO Capacitance Voltage (Min) IO Leakage Temp. Range Approx. Price
Application kV) kV) Channels (Typ) (pF) (V) Current (nA) (°C) Pin / Package (US$)
ESD Protection
TPD1E10B09 Interface 20 20 1 10 9.5 100 -40 to 125 2X2SON 0.04 |1ku
Interface,
TPD2E007 Wheatstone 8 15 2 15 14 50 -40 to 85 3SC70, 4DSLGA 0.20 | 1ku
Bridge

IEC 61000- IEC 61000- Breakdown Operating

4-2 Contact 4-2 Air-Gap Number of Voltage (Min) Ctotal (Typ) Rline (Typ) Temp. Range Approx. Price
Application (+/- kV) (+/- kV) Channels (V) (pF) (ohms) fc (MHz) (°C) Pin / Package (US$)
EMI Protection
TPD4F202 Keypad, LCD 25 25 4 6 30 100 108 -40 to 85 10DSBGA 0.17 | 1ku
TPD6F202 Keypad, LCD 25 25 6 6 30 100 108 -40 to 85 15DSBGA 0.21 | 1ku
TPD6F002 Keypad, LCD 20 30 6 6 34 100 100 -40 to 85 12SON 0.21 | 1ku
TPD8F003 Keypad 12 20 8 6 17 100 200 -40 to 85 16WSON 0.25 | 1ku
*Quantities of 1,000 begin at this suggested resale price in U.S. dollars. New products are listed in bold red.

12 | Field Transmitters and Process Instrumentation Solutions Guide 2013 Texas Instruments
Power Management Solutions

Texas Instruments (TI) offers a complete line

of high-performance power management
products designed for industrial applications.
The devices shown are well-suited for power-
ing sensors that may require low noise and
high efficiency in both line- and loop-powered
CBYP

VIN 10nF VOUT

IN OUT
(4-20 mA) topologies. CIN CBYP
R1
10µF 10nF
EN TPS7A4901 FB
COUT
R2 10µF

NR/SS GND
CNR/SS
10nF

Linear Regulators
Vin (Min) Vin (Max) Vout (Min) Vout Iout
(V) (V) (V) (Max) (V) (Max) (A) Iq (Typ) (mA) Accuracy (%) Output Options Pin / Package Approx. Price (US$)
Wide Vin Linear Regulators (Vin ≥ 24V)
TPS7A4001 7 100 1.2 90 0.05 0.02 2.5 Adjustable 8MSOP-PowerPAD 1.05 | 1ku
LM2936 5.5 60 3 5 0.05 0.015 2 Fixed 3TO, 4SOT, 8SOIC, 8VSSOP 0.62 | 1ku
Adjustable or
TPS7A1601 3 60 1.2 18.5 0.1 0.005 2 8 MSOP-PowerPAD, 8SON 1.40 | 1ku
Fixed
TPS7A4101 7 50 1.2 48 0.05 0.02 2.5 Adjustable 8MSOP-PowerPAD 0.35 | 1ku
TPS7A4901 3 36 1.2 33 0.15 0.06 1.5 Adjustable 8MSOP-PowerPAD 1.10 | 1ku
TPS70933/50 2.7 30 3.3 / 5 3.3 / 5 0.15 0.001 2 Fixed 5SOT-23, 6SON 0.39 | 1ku
LP2951 2 30 1.2 29 0.1 0.075 1.4 Adjustable 8SOIC 0.27 | 1ku
Linear Regulators (Vin < 24V)
LP2985-N 2.5 16 2.5 6.1 0.15 0.065 — Fixed 5DSBGA, 5SOT-23 0.24 | 1ku
LP3878-ADJ 2.5 16 1 5.5 0.8 0.18 — Adjustable 8SO PowerPAD, 8WSON 0.80 | 1ku
LP38798 3 20 1.2 11.8 0.8 1.4 1 Fixed 12WSON 1.30 | 1ku

Voltage References
Vin (Min) Vin (Max) Iout/Iz Iq (Typ) Drift @ 0°C to 125°C Drift @ -40°C to 125°C Initial Approx. Price
(V) (V) Vout (V) (Max) (mA) (µA) (Max) (ppm/°C) (Max) (ppm/°C) Accuracy (%) Pin / Package (US$)
REF5030/50 3.2 / 5.2 18 3/5 10 800 3 3 0.05 8SOIC, 8VSSOP 1.35 | 1ku
REF3230 3.05 5.5 3 10 100 7 26 0.2 6SOT-23 1.70 | 1ku
LM4132 2.2 5.5 1.8 to 4 20 60 20 30 0.05 5SOT-23 0.78 | 1ku
REF3330 3.2 5.5 3 5 3.9 — 30 0.15 3SC70, 3SOT-23 0.85 | 1ku
REF3030 3 5.5 3 25 42 50 75 0.2 3SOT-23 0.60 | 1ku

System Timer
Vin Vin Supply Programmable Interrupt Timekeeping Operating
(Min) (Max) Current Timer Interval Pulsewidth Accuracy (Max) Watchdog Temp. Range Approx. Price
(V) (V) (µA) (s) (s) (%) MOSFET driver Function (°C) Pin / Package (US$)
Ultra-Low Power System Timer
TPL5000 1.8 5.5 0.03 1 to 64 0.031 ±10 No Yes -40 to 125 MSOP-10 0.60 | 1ku
TPL5100 1.8 5.5 0.03 16 to 1024 0.031 ±10 Yes Yes -40 to 125 MSOP-10 0.60 | 1ku

Charge Pump
Vin Vin Iout Iq (Typ) Efficiency Operating Temp. Approx. Price
(Min) (V) (Max) (V) Vout (V) (Max) (A) (mA) (Typ) (%) Special Features EVM Range (°C) Pin / Package (US$)
Fully Integrated DC/DC Buck Modules
Enables True-Zero
LM7705 3 5.25 -0.232 0.026 0.078 98 LM7705MMEVAL -40 to 125 8VSSOP 0.19 | 1ku
Amp Outputs
*Quantities of 1,000 begin at this suggested resale price in U.S. dollars. New products are listed in bold red.

Texas Instruments Field Transmitters and Process Instrumentation Solutions Guide 2013 | 13
Power Management Solutions

Switching Regulators
Vin Vin Vout Vout Iout Switching Switch
(Min) (Max) (Min) (Max) (Max) Frequency Current Limit Duty Cycle Special Approx. Price
(V) (V) (V) (V) (A) (Max) (kHz) Topology (Typ) (A) Iq (Typ) (mA) (Max) (%) Features Pin / Package (US$)
Wide Vin DC/DC Step-Down (Buck) Converters (Vin ≥ 24V)
Enable,
Inverting Buck-
0.2 / Freq. Synch,
TPS54061/2 4.7 60 0.8 58 1100 / 400 Boost, Synch 0.35 / 0.13 0.09 98 8SON, 8VSSOP 0.88 | 1ku
0.05 Light Load
Buck Efficiency
0.6 /
LM25017/ 8SO PowerPAD,
9 48 1.25 40 0.3 / 1000 Synch Buck 1.3 / 0.7 / 0.3 1.75 90 — 1.57 | 1ku
18/19 8WSON
0.1
LM25007 9 42 2.5 37 0.5 800 Buck 0.725 0.5 99 — 8VSSOP, 8WSON 1.05 | 1ku
LMR24210 4.5 42 0.8 24 1 1000 Synch Buck 1.8 0.7 94 Enable 28DSBGA 1.50 | 1ku
LM34919 8 40 2.5 35 0.6 2000 Buck 0.64 0.5 — — 10DSBGA 1.20 | 1ku
DC/DC Step-Down (Buck) Converters (Vin < 24V)
Enable, Light
TPS62125 3 17 1.2 10 0.3 1000 Synch Buck 0.71 0.013 100 8WSON 0.85 | 1ku
Load Efficiency,
Enable, Light
TPS62231 2.05 6 1.8 1.8 0.5 2000 Synch Buck 0.84 0.022 100 6SON 0.50 | 1ku
Load Efficiency
Enable, Light
TPS62730 1.9 3.9 2.1 2.1 0.1 3000 Synch Buck 0.41 0.025 100 6SON 0.75 | 1ku
Load Efficiency

Vin (Min) Vin (Max) Vout (Min) Vout Iout Approx. Price
(V) (V) (V) (Max) (V) (Max) (A) Topology Special Features Pin / Package (US$)
Isolated DC/DC Converters
TPS55010 2.95 6 3.3 20 0.4 Fly-buck Enable, Synch Rectification, Power Good, Freq Synch 16WQFN 0.99 | 1ku
SN6501 3 5.5 0 11 0.25 Push-Pull Enable, Isolated 5SOT-23 0.90 | 1ku
DCR010503/5 4.5 5.5 3.3 / 5 3.3 / 5 0.3 / 0.2 — 1W, 1kV isolation, regulated single output 12SOP 5.95 | 1ku

Vin Vin Vout Vout Iout Switching

(Min) (Max) (Min) (Max) (Max) Frequency Approx. Price
(V) (V) (V) (V) (A) (Max) (kHz) Topology EVM Special Features Pin / Package (US$)
Fully Integrated DC/DC Buck Modules
Power Good, Soft-Start, Light Load
LMZ21701 3 17 0.9 6 1 2500 Buck LMZ21701EVM 8SIL 6.25 | 1ku
Efficiency, EMI Tested
LMZ14201 6 42 6 42 1 1000 Synch Buck LMZ14201EVAL Enable, Tracking, EMI Tested 7PFM 5.85 | 1ku
Enable, Freq Synch, Power Good,
LMZ35003 7 50 2.5 15 2.5 1000 Buck LMZ35003EVM-001 41B1QFN 6.25 | 1ku
Tracking, EMI Tested
*Quantities of 1,000 begin at this suggested resale price in U.S. dollars. New products are listed in bold red. Preview products are listed in bold teal.

PowerLab™ Power Reference Design Library

The PowerLab library includes an Features
interactive and powerful search engine • Extensive collection of tested power
for design engineers looking for a proven management reference designs.
and tested solution to their power-supply • Hundreds of power-management
requirements. This interactive search designs for a wide range of
tool allows engineers to find designs by applications and power-conversion
application, topology, input type, input topologies.
voltage or output voltage. • Reference designs include both
isolated and non-isolated designs
for lighting, telecommunication,
computing, consumer electronics
and more.

Get more information: www.ti.com/powerlab

14 | Field Transmitters and Process Instrumentation Solutions Guide 2013 Texas Instruments
TI Designs

When you need a trusted reference design resource, look no further than
TI Designs – a comprehensive reference design library spanning and
complementing the breadth of TI’s product portfolio. From embedded
processors to power management to signal chain designs, TI Designs
provides the information you need to quickly evaluate and customize a
system and accelerate your time-to-market.

Simple Thermocouple Measurement Gas Sensor Platform with BLE

Reference Design – TIPD109 Reference Design – GASSENSOREVM
Key Features Key Features
• Measures K-type thermocouple • Monitors wide range of gases (supports 2- and
• Accuracy <1°C 3-lead electrochemical cells)
• Precision/Repeatability 0.2°C • Complies with FCC and IC regulatory standards
• Includes cold junction • Coin cell battery operation
compensation • Monitor from iOS Mobile App
• Includes software algorithm
Reference Design Includes
Reference Design Includes • Schematics and PCB Layout
• TINA-TI Simulation • Bill of Materials
• Schematics and PCB Layout • FCC Certificates and Reports
• Verification and Measured Performance • Gerber Files
• Modification Options • Assembly Drawings
• Altium Project Files
TI Device: ADS1118
TI Devices: LMP91000, CC2541, LM4120,
Get more information: TPS61220
www.ti.com/tool/TIPD109
Get more information:
www.ti.com/tool/GASSENSOREVM

Bridge Sensor Signal Conditioner 4-20mA Current Loop 2-wire

with Current Loop, EMC Compatibility Sensor Power Supply
Reference Design – TIPD126 PowerLabs Design – PMP6938
Key Features Key Features
• EMC Tested • Small form factor that fits 7mm x 15.5mm x 0.8mm
• Digitally Calibrated 4-20mA Output • Input voltage withstands line transients up to 60V
• 0.1% Accuracy • Configured to deliver 3.3V/30mA
at 400kHz
Reference Design Includes
• Efficiency peaks at 70% at 20mA
• Schematic and PCB Layout
from 12Vin to 3.3Vout
• Bill of Materials
• Test Results Reference Design Includes
• EMC Test Results • Schematic and PCB layout
• TINA-TI Simulation • Bill of Materials
• Test Results
TI Devices: PGA309, XTR117
TI Device: TPS54062
Get more information:
www.ti.com/tool/TIPD126
Get more information:
www.ti.com/tool/PMP6938
Texas Instruments Field Transmitters and Process Instrumentation Solutions Guide 2013 | 15
 WEBENCH® Design Center
Get results faster with easy-to-use design tool that deliver custom results.

Quickly compare performance

across multiple parameters
for complete systems

• Designer Series –
Single-circuit design tools

• Architect Series –
Advanced hierarchical design tools

• Unique Design Features –

Visualizer and Optimizer Dial

ti.com/webench

TI Worldwide Technical Support

Internet Asia
Phone
TI Semiconductor Product Information Center Home Page International +91-80-41381665
support.ti.com Domestic Toll-Free Number
TI E2E™ Community Home Page  Note: Toll-free numbers do not support
e2e.ti.com mobile and IP phones.
Australia 1-800-999-084
China 800-820-8682
Product Information Centers Hong Kong 800-96-5941
Americas Phone +1(512) 434-1560 India 1-800-425-7888
Brazil Phone 0800-891-2616 Indonesia 001-803-8861-1006
Korea 080-551-2804
Mexico Phone 0800-670-7544 Malaysia 1-800-80-3973
Fax +1(972) 927-6377 New Zealand 0800-446-934
Internet/Email support.ti.com/sc/pic/americas.htm Philippines 1-800-765-7404
Singapore 800-886-1028
Europe, Middle East, and Africa Taiwan 0800-006800
Phone Thailand 001-800-886-0010
European Free Call 00800-ASK-TEXAS Fax +8621-23073686
(00800 275 83927) Email [email protected] or [email protected]
International +49 (0) 8161 80 2121 Internet support.ti.com/sc/pic/asia.htm
Russian Support +7 (4) 95 98 10 701 Important Notice: The products and services of Texas Instruments
Note: The European Free Call (Toll Free) number is not active in all c­ ountries. Incorporated and its subsidiaries described herein are sold subject to TI’s
If you have technical difficulty calling the free call number, please use the standard terms and conditions of sale. Customers are advised to obtain the
­international number above. most current and complete information about TI products and services
before placing orders. TI assumes no liability for applications assistance,
Fax +(49) (0) 8161 80 2045 customer’s applications or product designs, software performance, or
Internet www.ti.com/asktexas infringement of patents. The publication of information regarding any other
Direct Email [email protected] company’s products or services does not constitute TI’s approval, warranty
or endorsement thereof.
Japan
Phone Domestic 0120-92-3326
Fax International +81-3-3344-5317 B090712
Domestic 0120-81-0036 The platform bar, C5000, E2E, MSP430, PowerLab and Sitara are
Internet/Email International support.ti.com/sc/pic/japan.htm trademarks and WEBENCH is a registered trademark of Texas Instruments.
Domestic www.tij.co.jp/pic All other trademarks are the property of their respective owners.

© 2013 Texas Instruments Incorporated

Printed in U.S.A. by (Printer, City, State) SLYY043A
 IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products Applications
Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive
Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications
Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers
DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps
DSP dsp.ti.com Energy and Lighting www.ti.com/energy
Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial
Interface interface.ti.com Medical www.ti.com/medical
Logic logic.ti.com Security www.ti.com/security
Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com
Wireless Connectivity www.ti.com/wirelessconnectivity

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2013, Texas Instruments Incorporated