Scribd
Upload
258 views12 pages

Subnetting in Networking

The document discusses subnetting in networking. Some key points: - Subnetting involves dividing a single network into multiple subnetworks called subnets. - It improves security and makes network maintenance and administration easier. - Each subnet has a unique network address called the subnet ID, which is created by borrowing bits from the host ID portion of IP addresses. - There are two types of subnetting: fixed length and variable length. Fixed length uses the same subnet mask for all subnets, while variable length allows different subnet masks. - Examples show how to divide a sample network into 2, 4, and 3 subnets using subnetting. The process and properties of each new subnet are described.

Uploaded by

Shariff Oluoch Odiwuor
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
258 views12 pages

Subnetting in Networking

The document discusses subnetting in networking. Some key points: - Subnetting involves dividing a single network into multiple subnetworks called subnets. - It improves security and makes network maintenance and administration easier. - Each subnet has a unique network address called the subnet ID, which is created by borrowing bits from the host ID portion of IP addresses. - There are two types of subnetting: fixed length and variable length. Fixed length uses the same subnet mask for all subnets, while variable length allows different subnet masks. - Examples show how to divide a sample network into 2, 4, and 3 subnets using subnetting. The process and properties of each new subnet are described.

Uploaded by

Shariff Oluoch Odiwuor
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 12

Subnetting in Networking-

In networking,

 The process of dividing a single network into multiple sub networks is called as subnetting.
 The sub networks so created are called as subnets.
 

Example-
 

Following diagram shows the subnetting of a big single network into 4 smaller subnets-

Advantages-
 

The two main advantages of subnetting a network are-

 It improves the security.


 The maintenance and administration of subnets is easy.
 

Subnet ID-
 

 Each subnet has its unique network address known as its Subnet ID.
 The subnet ID is created by borrowing some bits from the Host ID part of the IP Address.
 The number of bits borrowed depends on the number of subnets created.
 

Types of Subnetting-
 

Subnetting of a network may be carried out in the following two ways-

1. Fixed Length Subnetting


2. Variable Length Subnetting
 

1. Fixed Length Subnetting-


 

Fixed length subnetting also called as classful subnetting divides the network into subnets where-

 All the subnets are of same size.


 All the subnets have equal number of hosts.
 All the subnets have same subnet mask.
 

2. Variable Length Subnetting-


 

Variable length subnetting also called as classless subnetting divides the network into subnets
where-

 All the subnets are not of same size.


 All the subnets do not have equal number of hosts.
 All the subnets do not have same subnet mask.
 

Subnetting Examples-
 

Now, we shall discuss some examples of subnetting a network-

 
Example-01:
 

Consider-

 We have a big single network having IP Address 200.1.2.0.


 We want to do subnetting and divide this network into 2 subnets.
 

Clearly, the given network belongs to class C.

Also Read- Classes of IP Address


 

For creating two subnets and to represent their subnet IDs, we require 1 bit.

So,

 We borrow one bit from the Host ID part.


 After borrowing one bit, Host ID part remains with only 7 bits.
 

 If borrowed bit = 0, then it represents the first subnet.


 If borrowed bit = 1, then it represents the second subnet.
 
IP Address of the two subnets are-

 200.1.2.00000000 = 200.1.2.0
 200.1.2.10000000 = 200.1.2.128
 

For 1st Subnet-


 

 IP Address of the subnet = 200.1.2.0


 Total number of IP Addresses = 27 = 128
 Total number of hosts that can be configured = 128 – 2 = 126
 Range of IP Addresses = [200.1.2.00000000, 200.1.2.01111111] = [200.1.2.0, 200.1.2.127]
 Direct Broadcast Address = 200.1.2.01111111 = 200.1.2.127
 Limited Broadcast Address = 255.255.255.255
 

For 2nd Subnet-


 

 IP Address of the subnet = 200.1.2.128


 Total number of IP Addresses = 27 = 128
 Total number of hosts that can be configured = 128 – 2 = 126
 Range of IP Addresses = [200.1.2.10000000, 200.1.2.11111111] = [200.1.2.128, 200.1.2.255]
 Direct Broadcast Address = 200.1.2.11111111 = 200.1.2.255
 Limited Broadcast Address = 255.255.255.255
 

Example-02:
 
Consider-

 We have a big single network having IP Address 200.1.2.0.


 We want to do subnetting and divide this network into 4 subnets.
 

Clearly, the given network belongs to class C.

For creating four subnets and to represent their subnet IDs, we require 2 bits.

So,

 We borrow two bits from the Host ID part.


 After borrowing two bits, Host ID part remains with only 6 bits.
 

 If borrowed bits = 00, then it represents the 1st subnet.


 If borrowed bits = 01, then it represents the 2nd subnet.
 If borrowed bits = 10, then it represents the 3rd subnet.
 If borrowed bits = 11, then it represents the 4th subnet.
 

IP Address of the four subnets are-

 200.1.2.00000000 = 200.1.2.0
 200.1.2.01000000 = 200.1.2.64
 200.1.2.10000000 = 200.1.2.128
 200.1.2.11000000 = 200.1.2.192
 

For 1st Subnet-


 

 IP Address of the subnet = 200.1.2.0


 Total number of IP Addresses = 26 = 64
 Total number of hosts that can be configured = 64 – 2 = 62
 Range of IP Addresses = [200.1.2.00000000, 200.1.2.00111111] = [200.1.2.0, 200.1.2.63]
 Direct Broadcast Address = 200.1.2.00111111 = 200.1.2.63
 Limited Broadcast Address = 255.255.255.255
 

For 2nd Subnet-


 

 IP Address of the subnet = 200.1.2.64


 Total number of IP Addresses = 26 = 64
 Total number of hosts that can be configured = 64 – 2 = 62
 Range of IP Addresses = [200.1.2.01000000, 200.1.2.01111111] = [200.1.2.64, 200.1.2.127]
 Direct Broadcast Address = 200.1.2.01111111 = 200.1.2.127
 Limited Broadcast Address = 255.255.255.255
 

For 3rd Subnet-


 

 IP Address of the subnet = 200.1.2.128


 Total number of IP Addresses = 26 = 64
 Total number of hosts that can be configured = 64 – 2 = 62
 Range of IP Addresses = [200.1.2.10000000, 200.1.2.10111111] = [200.1.2.128, 200.1.2.191]
 Direct Broadcast Address = 200.1.2.10111111 = 200.1.2.191
 Limited Broadcast Address = 255.255.255.255
 

For 4th Subnet-


 

 IP Address of the subnet = 200.1.2.192


 Total number of IP Addresses = 26 = 64
 Total number of hosts that can be configured = 64 – 2 = 62
 Range of IP Addresses = [200.1.2.11000000, 200.1.2.11111111] = [200.1.2.192, 200.1.2.255]
 Direct Broadcast Address = 200.1.2.11111111 = 200.1.2.255
 Limited Broadcast Address = 255.255.255.255
 

Example-03:
 

Consider-

 We have a big single network having IP Address 200.1.2.0.


 We want to do subnetting and divide this network into 3 subnets.
 

Here, the subnetting will be performed in two steps-

1. Dividing the given network into 2 subnets


2. Dividing one of the subnets further into 2 subnets
 

Step-01: Dividing Given Network into 2 Subnets-


 

The subnetting will be performed exactly in the same way as performed in Example-01.

After subnetting, we have-

 
 

Step-02: Dividing One Subnet into 2 Subnets-


 

 We perform the subnetting of one of the subnets further into 2 subnets.


 Consider we want to do subnetting of the 2nd subnet having IP Address 200.1.2.128.
 

For creating two subnets and to represent their subnet IDs, we require 1 bit.

So,

 We borrow one more bit from the Host ID part.


 After borrowing one bit, Host ID part remains with only 6 bits.
 

 If 2nd borrowed bit = 0, then it represents one subnet.


 If 2nd borrowed bit = 1, then it represents the other subnet.
 

IP Address of the two subnets are-


 200.1.2.10000000 = 200.1.2.128
 200.1.2.11000000 = 200.1.2.192
 

Finally, the given single network is divided into 3 subnets having IP Address-

 200.1.2.0
 200.1.2.128
 200.1.2.192
 

For 1st Subnet-


 

 IP Address of the subnet = 200.1.2.0


 Total number of IP Addresses = 27 = 128
 Total number of hosts that can be configured = 128 – 2 = 126
 Range of IP Addresses = [200.1.2.00000000, 200.1.2.01111111] = [200.1.2.0, 200.1.2.127]
 Direct Broadcast Address = 200.1.2.01111111 = 200.1.2.127
 Limited Broadcast Address = 255.255.255.255
 

For 2nd Subnet-


 

 IP Address of the subnet = 200.1.2.128


 Total number of IP Addresses = 26 = 64
 Total number of hosts that can be configured = 64 – 2 = 62
 Range of IP Addresses = [200.1.2.10000000, 200.1.2.10111111] = [200.1.2.128, 200.1.2.191]
 Direct Broadcast Address = 200.1.2.10111111 = 200.1.2.191
 Limited Broadcast Address = 255.255.255.255
 
For 3rd Subnet-
 

 IP Address of the subnet = 200.1.2.192


 Total number of IP Addresses = 26 = 64
 Total number of hosts that can be configured = 64 – 2 = 62
 Range of IP Addresses = [200.1.2.11000000, 200.1.2.11111111] = [200.1.2.192, 200.1.2.255]
 Direct Broadcast Address = 200.1.2.11111111 = 200.1.2.255
 Limited Broadcast Address = 255.255.255.255
 

Disadvantages of Subnetting-
 

Point-01:
 

Subnetting leads to loss of IP Addresses.

During subnetting,

 We have to face a loss of IP Addresses.


 This is because two IP Addresses are wasted for each subnet.
 One IP address is wasted for its network address.
 Other IP Address is wasted for its direct broadcasting address.
 

Point-02:
 

Subnetting leads to complicated communication process.

After subnetting, the communication process becomes complex involving the following 4 steps-

1. Identifying the network


2. Identifying the sub network
3. Identifying the host
4. Identifying the process
 
PRACTICE PROBLEMS BASED ON SUBNETTING IN
NETWORKING-
 

Problem-01:
 

Suppose a network with IP Address 192.16.0.0. is divided into 2 subnets, find number of hosts per
subnet.

Also for the first subnet, find-

1. Subnet Address
2. First Host ID
3. Last Host ID
4. Broadcast Address
 

Solution-
 

 Given IP Address belongs to class C.


 So, 24 bits are reserved for the Net ID.
 The given network is divided into 2 subnets.
 So, 1 bit is borrowed from the host ID part for the subnet IDs.
 Then, Number of bits remaining for the Host ID = 7.
 Thus, Number of hosts per subnet = 27 = 128.
 

For 1st Subnet-


 

 Subnet Address = First IP Address = 192.16.0.00000000 = 172.16.0.0


 First Host ID = 192.16.0.00000001 = 192.16.0.1
 Last Host ID = 192.16.0.01111110 = 192.16.0.126
 Broadcast Address = Last IP Address = 192.16.0.01111111 = 172.16.0.127
 

Problem-02:
 

What is not true about subnetting?

1. It is applied for a single network


2. It is used to improve security
3. Bits are borrowed from network portion
4. Bits are borrowed from Host portion
 

Solution-
 

Clearly, Option (C) is correct.

Problem-03:
 

In a class B, network on the internet has a subnet mask of 255.255.240.0. What is the maximum
number of hosts per subnet?

1. 4096
2. 4094
3. 4092
4. 4090
 

Solution-
 

 Number of bits reserved for network ID in the given subnet mask = 20.
 So, Number of bits reserved for Host ID = 32 – 20 = 12 bits.
 Thus, Number of hosts per subnet = 212 – 2 = 4094.
 In class B, 16 bits are reserved for the network.
 So, Number of bits reserved for subnet ID = 20 – 16 = 4 bits.
 Number of subnets possible = 24 = 16.
 Thus, Option (B) is correct.

You might also like