M-710 Robot Working Range: 70 KG 2050 MM

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

M-710iC/70 Max. load capacity Max.

reach:
at wrist: 70 kg 2050 mm

Motion range (°) Maximum speed (°/s)

Mechanical J4 Moment/ J5 Moment/ J6 Moment/


Controlled Repeatability
weight Inertia Inertia Inertia
axes (mm) J1 J2 J3 J4 J5 J6 J1 J2 J3 J4 J5 J6
(kg) (Nm/kgm2) (Nm/kgm2) (Nm/kgm2)

6 ± 0.04* 560 360 225 440 720 250 720 160 120 120 225 225 225 294/28 294/28 147/11

Working range Robot M-710iC/70


Robot footprint [mm] 535 X 550
Mounting position Floor
+180° Mounting position Upside down

-180° Mounting position Angle
R 205
0 Controller R-30iB Plus
Open air cabinet -
Mate cabinet
(+150, +2465) A-cabinet
B-cabinet
iPendant Touch
J5 axis
rotation center Electrical connections
Voltage 50/60Hz 3phase [V] 380-575
Voltage 50/60Hz 1phase [V] -
Average power consumption [kW] 2.5

Motion range
Integrated services
of the J5 axis Integrated signals on upper arm In/Out 8/8
rotation center
Integrated air supply 1
(-1750,+565) (+2050,+565)
Environment
Acoustic noise level [dB] 71.3
Ambient temperature [° C] 0-45
(0,0)
Protection
Body standard/optional IP54/IP67
Wrist & J3 arm standard/optional IP67

Motion range may be (+765,-1080)


restricted according
to the mounting angle!

standard on request - not available ( ) with hardware and/or software option *Based on ISO9283
MDS-03862 -EN Technical information subject to changes without prior notice. All rights reserved. ©2019 FANUC Europe Corporation

You might also like