Bucket Selection Guide Supplemental Specifications

Change in operating Change in static Change in static

Description weight tipping load-straight tipping load-40ⅳturn
kg(lb) kg(lb) kg(lb)

20.5-25 16PR L3 -872 (-1,922) -670 (-1,477) -591 (-1,303)

23.5-25 20PR, L5 +884 (+1,949) +680 (+1,499) +600 (+1,320) NEW 7 SERIES
23.5 R25 XHAᵂ +8 (+18) +6 (+13) +5 (+11)

HYUNDAI WHEEL LOADER Applied Tier 2 Engine

Standard Equipment
Electrical system . operating hour counter Cab . Low Emission Diesel, Tier-ll Remote cooling fan,
Alternator, 70A . engine rpm Cab, ROPS/FOPS Engine enclosure, lockable hydraulically-driven,
Alarms, audible and visual . transmission gear range indicator (sound suppressed and pressurized) with : Engine fuel priming pump temperature sensing type
. air filter clogging . job time and distance . cigar lighter & ashtray Fan guard Others
. transmission error . temperature(coolant, hydraulic . coat hook Fuel/water separator Articulation locking bar
. alternator voltage oil, t/m oil) . front/rear window defroster Muffler, under hood with large Coolant level sight gauge
. brake oil pressure . intermittent wiper and washer, exhaust stack
Lighting system Counterweight
. engine oil pressure . 2 dome lights front and rear Pre-cleaner, engine air intake Door and cab locks, one key
. parking brake . 2 stop and tail lights . personal storage space: Radiator Doors, service access(locking)
. fuel level . 4 turn signals console box Starting aid (air intake heater) Drawbar with pin
. hydraulic oil temperature . brake lights(counterweight) cool & hot box Water sensor on fuel filter Engine oil level dipstick gauge
. coolant temperature . license plate light holder, can and cup Power Train Ergonomically located and slip
. service brake oil pressure . rear view mirrors (2 inside)
. head light Brakes : Service, enclosed wet-disc resistant, left & right
Batteries, maintenance-free 950 CCA, . rear view mirrors (2 outside)
2 on front tower Differential, torque proportioning - handrails
12V, (2) . working lights . seat belt, 2” static
(front/rear) - ladders
Gauges . seat, adjustable suspension
2 on front roof Parking brake - platforms
. engine coolant temperature 2 on grill with armrests Torque converter - steps
. fuel level . steering column, tilt and telescopic
Switches Transmission, computer-controlled, Fenders(front/rear)
. hydraulic oil temperature . steering wheel with knob
. buzzer stop electronic soft shift, auto-shift and Guard, bucket cylinder rod
. speedometer . sunvisor(front window)
. clutch cut-off quick-shift features included Hydraulic oil level sight gauge
. transmission oil temperature . tinted safety glass
. hazard Transmission oil cooler License plate bracket
. voltmeter . two door cab, fixed glass
. lgnition key, start/stop switch Hydraulics Lift and tie-down hooks
Horn, electric Magazine box Loader linkage, sealed Z-bar design
. main light(illumination and Boom lock safety valve
Pedals Steering stops, cushioned
Indicator lights head light) . one accelerator pedal Boom kickout, automatic
. clutch cut-off . parking Bucket positioner, automatic Tires(23.5-25, 20PR,L3)
. one brake pedal
. high beam . rear wiper & washer Diagnostic pressure taps Transmission oil level dipstick
Rubber floor mat ga•ge
. turn signal . work light Hydraulic oil cooler
Wrist rest Vandalism protection caplocks
. work light . full automatic transmission Hydraulic system,
Starter, electric Engine . 2 spool, single lever, pilot control
LCD Display Antifreeze
. clock and fault code Starting and charging system(24-volt) for boom and bucket actuation
Engine, Cummins QSB5.9-C Steering, load-sensing

Optional Equipment
24-volt to 12-volt DC converter Emergency steering system Main disconnect switch . 3” retractable seat belt & Tooth, 1 piece, bolt-on type
Air condition : Fire extinguisher Mud guard adjustable mechanical Tooth, 2 pieces, bolt-on type
. air conditioner Fuel warmer Open Canopy (NONE-ROPS) suspension Guards
. air conditioner with heater High lift arrangement with Operator suit . 3” retractable seat belt & . crankcase
. heater optional counterweight, Radio cassette player adjustable air suspension . transmission
Alarm, back-up 1630kg (3590 lb) Ride control system Tires : Wheel chock
Beacon light, rotating Hourmeter Seat . 20.5 - 25, 16PR, L3 Window, sliding (left and right side)
Cutting edge, bolt-on type Hydraulic control, 2 lever . 2” static seat belt & . 23.5 - 25, 20PR, L5
Differential, limited slip Hydraulic control, 3 lever adjustable mechanical . 23.5 R25 XHAᵂ
(front/rear) Hydraulic arrangement 3-valve suspension(vinyl) Tool kit
Lighting, auxiliary, 4 on roof

Standard and optional equipment may vary. Consult your Hyundai dealer for more information. The machine shown may vary according to territorial specification.

PLEASE CONTACT

␍ Photo may include optional equipment.

www.hyundai-ce.com 2007. 06 rev.8

 Hardworking Hyundai Loaders
Meet the new generation wheel loader in Hyundai.

The HL760-7 will give you the satisfaction in higher power.

lower fuel consumption, more comfort and lower emission .

Come and experience what Hyundai has created

for you by bringing power and technology.

Wheel Loaders
Engine
੒Electronic Engine Control System
੒Engine Protection & Selfdiagnosis System
੒Max Power 225 HP

Transmission
੒2 Automatic Selection Mode
੒2 Kick Down Function Mode
੒AEB Function

Axle
੒Increased Number of Brake Disk
੒Pilot type Front Axle
␍ Photo may include optional equipment.
 The all-new, deluxe operating space was engineered with
Control 3-D modeling for your ultimate control center. The wide,

Center tinted and laminated front windshield has no framing

cutting through to ensure excellent visibility.

The Centralized Display &

Switch Panel
The centralized digital display shows the
status and conditions of your machine at a
glance.

Joystick Control Lever

Two kickdown switches located on the top of
the loader control lever and the gear shifting
lever allow the operator to change instantly to
1st stage lower gear, in order to drive at full
power into the material.

The Air Conditioning and

Heating System
The operator can easily control the
temperature and air flow . The defroster
on the front windshield and rear window
makes it convenient for winter working
usage.

♱ ♲
♱Power Outlet & Cigar Jack
Up-to-Date-technology CAN System ♲Cup Holder & Console Box
Engine control Unit(ECU), Transmission control ♳Magazine Box
Unit(TCU) and Machine control Unit(MCU) realize the ♴Cool & Hot Box

optimal performance through the mutual

♴ ♳
CAN communications.

␍ Photo may include optional equipment.

Full automatic shift lever

A single lever on the left side of the steering Ride control system (optional)
column gives the operator fast, easy control of The ride control system is available for smooth travelling as option.
Adjustable steering column It significantly reduces machine bouncing and absorbs the shocks in the machine,
speed and direction. Push the lever forward to go
forward, pull it back for reverse. enhancing the productivity of the machine. This system reduces the fatigue of the
Travelling is automatically changed from 1st stage driver as well as the stress on the structures and components.
to given stage according to travel speed and The system consists of accumulators in the hydraulic lift circuit, hydraulic control
40ᴮ tractive effort. The operator can select two valve and selection switch.
80 mm ♱ Off position : Function is cancelled ♲ On position : Function is available
kinds of automatic modes (1st ␤ 4th, 2nd ␤ 4th).
This exclusive feature contributes to a step-up in ♳ Auto position : Function is available when the machine travels above
productivity and reduction of operator’s fatigue. 9.5km/hr(6.0mph). If the machine travels under 8 km/hr (5.0 mph), the function is
cancelled automatically.

Control Center 4 Control Center 5

 Engine
The CUMMINS QSB5.9-C

A Well Rounded System electronic control engine

combines full-authority
electronic controls with
the reliable performance.
The combination of
improved airflow and
evenly dispersed fuel
results in increased
power, improved transient
response and reduced fuel
consumption.
Up-to-date hydraulic remote And the QSB5.9-C uses
cooling fan advanced electronics
The minimum fuel consumption and low controls to meet the emission standards
noise is realized by applying hydraulic (EPA TierII, EU StageII)
cooling fan sensing coolant temperature,
intake air temperature, transmission oil Multi Function
temperature and hydraulic oil temperature.
Transmission
The newly developed transmission
control represents the beating heart
of transmission. The hydraulic
system for gearshifts is working
with proportional valves, which
allow a very precise control of the
clutches. For each gearchange, the
control unit performs a monitoring
function to ensure the specified
shift curve is adhered to, and
readjusts the shift pressure applied
to the clutches accordingly. This
results in smooth gearshifts-even
under load-with no traction interrupt. This helps to avoid standstill
of the vehicle, sudden load changes and torque peaks under all
conditions, for example application on steep terrain with full load.
In addition, there is the option for the driver to make gearshifts
manually.

Axle
Increased number of brake disc.
Increased mounting strength by
applying the fixed front axle pilot.

␍ Photo may include optional equipment.

Bucket cylinder guard Wear plate High-rigidity frames Battery master switch Sealed loader linkage Frame lock
This guard helps to prevent This close up shows the Front and rear frames are designed for work A master switch disconnects the battery Fully protected fitting is and the sealed Machine can be locked by this locking
possible damage from load protective plating found in the toughest applications to provide high power to protect the electrical system loader linkage with dust seals and o-ring bar to prevent movement during
material. underneath the rear of the rigidity for the power train and loader from excess electrical drainage. will extend lubrication intervals transportation.
Left and right access bucket and is used to prevent equipment. The high-rigidity frames, together remarkably.
excess wear when digging with the reinforced loader linkage, resist
door into material. loading stress and shock.

A Well Rounded System 6 A Well Rounded System 7

 Accessible and Serviceable

Easy Access to All Engine Accessary

Here you find the engine oil check, and the main
and pre-filters. The large access engine-side-
panels permit easy and safe inspections. The
fuel filter can be spun on and off for quick
replacements.

Cabin Air Fresh Filter

The internal pressure is maintained
to be slightly higher than that of
outside to exclude dust and to
reduce noise levels.

Fuse Box
A concentrated fuse box for easy
inspection.

Coolant Sight Gauge

The coolant sight gauge is
installed on the top of radiator
for convenient checks of coolant
level.
␍ Photo may include optional equipment.

␍ Photo may include optional equipment.

Accessible grease Simple air filter Central electric Remote type drain port Hydraulic tank Open pin access Oil sight gauge Transmission oil port
fittings replacements controllers It is now easier to change your The hydraulic tank is located behind the cab You can more readily remove The hydraulic oil check sight The transmission oil change
Grease fittings are highlighted The air cleaner is easily Electric controllers for engine oil, coolant and to increase the accessibility of hydraulic or tighten your front gauge is installed on the side port is also located for open
and available around the replaceable by turning the Hyundai loader are hydraulic oil with the remote hoses and piping. attachment pin with these of the hydraulic tank for accessibility and comes with
machine for fast access when wing nut on the outer shell centralized to improve drain port. open connectors surrounding convenient checks from an anti-vandalism lock for
doing your service checks. counterclockwise. serviceability. the pin. ground level. your machine protection.

Accessible and Serviceable 8 Accessible and Serviceable 9

 Specification & Dimensions
Engine Axles Brakes Dimensions

Maker/Model CUMMINS QSB5.9-C Drive system Four-wheel drive system Hydraulically actuated, wet disc
Type 4-cycle, turbocharged, charge brakes actuate all 4 wheels
Mount Rigid front axle and
aircooled direct injection, Service brakes independent axle-by-axle system.
oscillating rear axle
electronic controlled diesel engine Single pedal braking including
Rear axle oscillation ᴦ12o (total 24o) clutch cut off switch.
Gross power 215HP(160 kW) / 2,200rpm
Hub reduction Planetary reduction at wheel end Spring-applied, hydraulically
Net power 205HP(153 kW) / 2,200rpm Parking brake released disc brake on
Differential Torque proportional differential
Maximum power 225HP(168 kW) / 2,000rpm front axle input shaft
Reduction ratio 24.685 When brake oil pressure
Maximum torque 96kg.m(692 lb.ft) / 1,500rpm
drops, indicator light alerts
No. of cylinders 6 Emergency brake
operator and parking brake Description UNIT HL760-7 HL760XTD-7
Bore x Stroke 102 mm (4.0”) x 120 mm (4.7”) Hydraulic system automatically applies. Bucket Type General purpose bolt-on cutting edge
Displacement 5.9ὀ(360 cu in) A. Dumping clearance at max.
mm (ft-in) 3,000 (9’ 10”) 3,490 (11’ 5”)
Open-centered, tandem circuit system. height and 45o dump angle.
Compression ratio 16.3 : 1 Full lift mm (ft-in) 1,190 (3’ 11”) 1,215 (4’)
Type Pilot-operated controls. B. Reach
Air cleaner Dry, dual elements 7ft height mm (ft-in) 1,720 (5’ 8”) 2,180 (7’ 2”)
Closed with pressure and vacuum relief.
Steering system C. Digging depth mm (in) 90 (3.5”) 90 (3.5”)
Alternator 24V, 70 Amp
Helical gear type, 283 liters/min on ground mm (ft-in) 8,060 (26’ 5”) 8,620 (28’ 3”)
Battery 2 x 12V, 130 Ah. Pump D. Overall length
(75 gal/min)@governed rpm Type Full hydraulic power steering at carry mm (ft-in) 8,000 (26’ 3”) 8,580 (28’ 2”)
Starting motor 24V, 3.7 kW E. Overall height (fully raised) mm (ft-in) 5,540 (18’ 2”) 6,030 (19’ 9”)
Two function valve with single or Pump Helical gear type, 147 liters/min
F. Bucket pivot max. height mm (ft-in) 4,150 (13’ 7”) 4,610 (15’ 1”)
two lever controls : (46.0 gal/min)@ governed rpm
Net power output of standard engine as installed in this G. Front overhang mm (ft-in) 2,745 (9’) 3,210 (10’ 6”)
vehicle(per SAE J1349) complete with fan, air cleaner, Control valve Optional third-function valve Relief valve setting 210 kg/cm2 (2,990 psi) H. Wheelbase mm (ft-in) 3,300 (10’ 10”) 3,300 (10’ 10”)
alternator, water pump, lubricating oil pump and fuel with auxiliary lever. I. Ground clearance mm (ft-in) 420 (1’ 5”) 420 (1’ 5”)
Cylinder
pump. No derating for continuous operating required up Relief valve setting 210 kg/cm2 (2,990 psi) J. Height over exhaust mm (ft-in) 3,210 (10’ 6”) 3,210 (10’ 6”)
Type Double acting
to 3048m (10000ft). This engine meets the EPA(Tierௗ) / Pilot system K. Height over cab mm (ft-in) 3,440 (11’ 3”) 3,440 (11’ 3”)
EU(Stageௗ) Emission regulation. Bore x stroke 80mm(3.1") x 440mm(17.3") on ground deg 42 42
L. Roll-back angle
Type Pilot oil pressure is generated Steering angle 40o(each direction) at carry deg 47 49
by the pilot oil supply unit. M. Dump angle deg 47 47
Relief valve setting 30 kg/cm2(427 psi) Features Clearance circle mm (ft-in) 13,360 (43’ 10”) 13,800
Transmission - Center-point frame articulation. N. Overall width mm (ft-in) 2,900 (9’ 6”) 2,900 (9’ 6”)
Bucket controls
- Load-sensing, pressure-compensated system.
Full automatic power shift, countershaft type with soft- - Steering-wheel operated metering pump controls
Pilot operated lift and tilt circuit,
shift in range and direction. Properly matched torque Type single-lever(joystick) control flow to steering cylinders.
converter to engine and transmission for excellent standard. - Tilt and telescopic steering column. Overview
working ability
The valve has four functions ; Description UNIT HL760-7 HL760XTD-7
raise, hold, lower and float. Operating weight kg (lb) 17,900 (39,460) 18,700 (41,230)
3-elements, single-stage Lift circuit
Torque converter type Can adjust automatic kickout Heaped m3 (yd3) 3.1 (4.0) 3.1 (4.0)
single-phase Bucket capacity
from horizontal to full lift. Struck m3 (yd3) 2.7 (3.5) 2.7 (3.5)
Stall torque ratio 3.06 :1 Service refill capacities
Breakout force-bucket kg (lb) 15,950 (35,160) 15,650 (34,500)
The valve has three functions ; Straight kg (lb) 13,840 (30,510) 12,280 (27,070)
Travel speed tilt back, hold and dump. Fuel tank 330 liters (87 USgal) Tipping load
km/h (mph) Tilt circuit Full turn kg (lb) 12,100 (26,680) 10,570 (23,300)
23.5-25, L3 Can adjust automatic bucket Cooling system 39 liters (10.3 USgal)
positioner to desired load angle.
Forward 1st 7.6(4.7) Crankcase 16 liters (4.2 USgal)
Type : Double acting Tires
2nd 12.8(8.0) Transmission 32 liters (8.5 USgal)
No. of cylinders-bore x stroke;
3rd 23.6(14.7) Cylinder Front axle 45 liters (11.9 USgal)
Lift 2-160 mm(6.3") x 757 mm(29.8") Type Tubeless, loader design tires
4th 36.4(22.6) Tilt 1-180 mm(7.1") x 530 mm(20.9") Rear axle 40 liters (10.6 USgal)
Standard 23.5-25, 20 PR, L3
Reverse 1st 8.0(5.0) Raise : 6.2 sec (with load)
Hydraulic tank 150 liters (39.7 USgal)
Dump : 1.3 sec Options include 20.5-25, 16 PR, L3
2nd 13.5(8.4) Cycle time Hydraulic system 23.5-25, 20 PR, L5
Lower : 3.0 sec (empty) 260 liters (68.7 USgal)
3rd 24.7(15.3) (including tank) 23.5 R25 XHAᵂ
Total : 10.5 sec

Specification & Dimensions 10 Specification & Dimensions 11