Tagging Philosophy For Junction Boxes, Panels & Cables
Tagging Philosophy For Junction Boxes, Panels & Cables
2
44NC-4600 Junction Boxes,Panels & Cables PAGE 1 OF 7
LSTK-1 Coker Block Annex.VI to 44NC-4600-0000-/J.02/0101/A4 Rev. 0
ANNEXURE-C
ANNEXURE: VI
CONTENTS
1.0 Purpose
4.0 Cables
1.0 PURPOSE
The purpose of this document is to define tagging philosophy for Junction Boxes, Panels &
Cables, for Reside up gradation project for CPCL Manali,Chennai --Tamilnadu.
XXX - AA Y - 001
Unit Number
Group Code (Table 1)
For Serial No. 1
Signal Type (Table 2)
Sequence Number
XXX - AA - 001 - F or R
Unit Number
Group Code (Table 1)
For Serial No. 6
Sequence Number
Suffix*
* - F = Front, R = Rear
4.0 Cables
Individual cables running between field junction boxes and field mounted instrumentation
shall be identified by the instrument tag number.
e.g. XXX-PT-0001
Unit No.
This is also applicable for Foundation Field bus Instruments. Hyphen and spaces do
not form part of the cable number and are shown for clarity only.
XXX - JB Y - 101
Unit Number
Group Code (Table 1)
For Serial No. 3
Signal Type (Table 2)
Area wise
Cable Sequence Number
(Same as of JB X sequence Number)
Unit Number
Group Code (Table 1)
For Serial No. 3
Signal Type (Table 2)
Panel Sequence Number
Cable Sequence Number
Hyphens and spaces do not form part of the cable number and are shown for clarity only.
XXX - AA Y - 900
Unit Number
Group Code (Table 1)
For Serial No. 3
Signal Type (Table 2)
Cable Sequence Number
Hyphens and spaces do not form part of the cable number and are shown for clarity
only.
Tagging for Cross wiring i.e. between Marshalling Cabinets to Marshalling Cabinets
or to relay cabinet or other cabinet etc. by DCS vendor.
Wire Number Ferrules consist of Tag Number, Terminal Block Number and Terminal
Number.
Unit Number
Sequence Number
XXX - JB FF - 001
Unit Number
Group Code (Table 1)
For Serial No. 1
Signal Type (Table 2)
Sequence Number
Hyphens and spaces do not form part of the junction box number and are shown for clarity
only.
6.3 Trunk Cables (Spur Junction Box (L1) To Fieldbus Junction Box (L2))
XXX - TC FF - 001
Unit Number
Group Code (Table 1)
For Serial No. 4
Signal Type (Table 2)
Sequence Number
Hyphens and spaces do not form part of the cable number and are shown for clarity only.
Unit Number
Group Code (Table 1)
For Serial No. 3
Signal Type (Table 2)
Sequence Number
Hyphens and spaces do not form part of the cable number and are shown for clarity only.