This document provides specifications for injector nozzle assembly 35542, including:
1. Calibration settings for new and service injectors, including opening pressure, valve lift, spray orifice size and number, sac type, and return oil leakage rate.
2. A list of items used in conjunction with the nozzle assembly that are purchased separately, such as protective caps, clamp screws, and connectors.
3. An exploded diagram and parts list for the nozzle assembly, including 12 numbered parts, their quantities, and descriptions.
This document provides specifications for injector nozzle assembly 35542, including:
1. Calibration settings for new and service injectors, including opening pressure, valve lift, spray orifice size and number, sac type, and return oil leakage rate.
2. A list of items used in conjunction with the nozzle assembly that are purchased separately, such as protective caps, clamp screws, and connectors.
3. An exploded diagram and parts list for the nozzle assembly, including 12 numbered parts, their quantities, and descriptions.
This document provides specifications for injector nozzle assembly 35542, including:
1. Calibration settings for new and service injectors, including opening pressure, valve lift, spray orifice size and number, sac type, and return oil leakage rate.
2. A list of items used in conjunction with the nozzle assembly that are purchased separately, such as protective caps, clamp screws, and connectors.
3. An exploded diagram and parts list for the nozzle assembly, including 12 numbered parts, their quantities, and descriptions.
This document provides specifications for injector nozzle assembly 35542, including:
1. Calibration settings for new and service injectors, including opening pressure, valve lift, spray orifice size and number, sac type, and return oil leakage rate.
2. A list of items used in conjunction with the nozzle assembly that are purchased separately, such as protective caps, clamp screws, and connectors.
3. An exploded diagram and parts list for the nozzle assembly, including 12 numbered parts, their quantities, and descriptions.
EDITION : 2 ENGINE MODEL NO: 4045D, 6068D ASSEMBLY NO: 35542 DATED: 12-10-2001 SUPERSEDES: CUSTOMER: JOHN DEERE CUSTOMER PART NO: RE515684 TEST STAND: ISO 8984 NOTE: Reference Pencil Nozzle Service 1. CALIBRATION FLUID…SAE J967 / ISO 4113 Manual 99002 and S.B. 467 for (Ref. S.B. 201) AT ROOM TEMPERATURE (70°-80° F) additional service information. 2. CALIBRATION HIGH PRESSURE PIPES…0.063 X 12” (1.6 X 305 mm)
INJECTOR SETTINGS THE FOLLOWING ITEMS USED IN CONJUNCTION WITH THE
NOZZLE ASSEMBLY ARE PURCHASED SEPARATELY: 1. OPENING PRESSURE SETTINGS: A. PROTECTIVE SHIPPING CAPS NO. 16560 & 18964 SET CHECK B. NOZZLE CLAMP SCREW NO. 28365 (.3125-18) OR ** NEW 3820 ± 40 PSI 3740 PSI MIN. 34979 (M8 X 1.25) (263.5 ± 2.8 bar) (257.5 bar) C. FUEL LINE CONNECTOR NUT NO. 16164 SERVICE 3620 ± 40 PSI 3410 PSI MIN. D. FUEL LINE FERRULE NO. 16166 (249.5 ± 2.8 bar) (235.5 bar) E. NOZZLE LEAK-OFF CAP NO. 31286 F. NOZZLE LEAK-OFF NUT NO. 24187 * 2. VALVE LIFT: TURN 3/4 ± 1/8 .0135 (0.34mm) NOMINAL G. NOZZLE LEAK-OFF GROMMET NO. 17721 3. SPRAY ORIFICE SIZE: .0106 (0.27mm) 4. SPRAY ORIFICE NUMBER: 4 * ASSEMBLY TORQUE: 5. SAC TYPE: TAPERED MINI 24185 70-80 lbf·in (7.9-9.0 N·m) 6. CHECK NOZZLE “CHATTER” PER PENCIL NOZZLE SERVICE 24186 35-45 lbf·in (4.0-5.1 N·m) MANUAL 99002. IF ACCEPTABLE PROCEED TO STEP 7. 24187 20-30 lbf·in (2.3-3.4 N·m) 7. RETURN OIL LEAKAGE: 1 TO 14 DROPS / 30 SECONDS MAX. AT 1500 PSI (SERVICE ONLY). ♦ NEW CLAMPS NO. 32651 MUST NOT BE MIXED WITH OLD CLAMPS. REFERENCE S.B. 479A ** SETTINGS FOR NEW NOZZLE OR WHEN A NEW PRESSURE ADJUSTING SPRING IS USED.
