Helical Rotor Blower: ARH-E/EP Series ARH-S/SP Series

Download as pdf or txt
Download as pdf or txt
You are on page 1of 18

Helical Rotor Blower

(Roots Type)
ARH-S/SP ARH-E/EP Series

ARH-S/SP Series
With IE1/IE2 Motor

ARH-E/EP Series
With Premium Efficiency IE3 Motor

Full lineup of helical blowers for a variety of applications


ShinMaywa helical blowers are
the latest in roots-type blowers which
incorporate low noise technology.
We use our outstanding technology to meet the high-level
needs of the world of industry by also giving consideration
to environmental problems such as noise.

Comprehensive
low-noise design
The design suppresses vibration
in the low-frequency range
where blower noise is generated.

The reason why ShinMaywa blower noise suppression is successful is as follows. The main sources of blower noise include
sources such as "pulsating noise of rotor", followed by "gear meshing", and then "bearings". Of particular note is the pulsating
noise (roots noise) generated by the air which is displaced by the rotors. At ShinMaywa we have successfully used "3-lobe
helical rotor" to greatly reduce the amount of this pulsating noise. Furthermore, ShinMaywa technology for suppressing sound is
not limited to just the rotors. We have also devised a torsional shape for the teeth gears which drive the rotors.

Q What is the difference between helical-type


rotors and spur-type rotors? Q When the rotors are twisted, does the amount
of blown air drop for each rotation?

A ShinMaywa helical
rotors have three
(Pulsation diagram)
3-lobe helical
A The tips of the rotor teeth
used by ShinMaywa are slim.
3-lobe involute type 3-lobe arc type

lobes twisted in a spiral Therefore, even though the


shape, so that they rotors are twisted, the amount of
displace the air air blown per rotation is more
2-lobe spur
continuously to prevent than spur type blowers.
pulsating noise from
occurring.
3-lobe spur
Q How do you inspect the twisting of the
precision rotors and the curve of the teeth?

A The shape of the rotor teeth is inspected using 3-dimensional


measuring equipment. Measurement results are output to a
Because there is only a small gap between plotter. Thorough quality control is carried out to ensure that the

Q the twisted rotors and the rotor housing,


is high-precision machining required?
curvature of the teeth is within the allowable tolerances.

A A high-precision machine called a "milling machine" is used


for machining the screws and the gears, so that the rotors
are manufactured with high precision and high reliability.

[Processing method]
The rotor turns slowly to match
the rotation of the cutter.
The cutter moves forward in
the direction of the arrow while
rotating.

Cutter
Results
are output Theoretical
design line
●Rotor processing using a milling machine Allowable dimension

→ tolerance
Measurement
line

● Tooth curvature line

2
Data showing the low-noise operation
of ShinMaywa helical blowers differeence A the
les th
uble
For low-frequency noise which is expensive to reduce, of 3dB do d noise!
perc e iv e
our design reduces the noise inside machine chambers ce of
by 2dB and outside the machine chambers by about A differenses the
a
8 dB compared to spur-type blowers. 8dB incre noise by
perceived times.
about 7
■ Comparison of noise frequencies between
ShinMaywa helical blowers and general spur-type blowers
Reliable oil seal
●Blower noise consists of low-frequency range noise and high-frequency range noise. Fluororubber is used for the oil seal. The lubricating
Low-frequency High-frequency system is protected with the labyrinth seal which is
range range
2dB(A)

effective to prevent oil leakage.


80
Specifications:
Outlet dia. 80mm Output 5.5kW Speed 1,830min-1
Helical
Noise value inside
4.66m3/min x 40kPa
Easy maintenance
70
machine chamber
Measurement value The bearing is fixed with a C-type retaining ring. The
timing gear can be disassembled easily by a gear puller.
60
Inside machine A ball bearing is employed instead of a roller bearing, to
Spur rotor chamber
avoid damaging the inner case during reassembly. Thus,
50
Helical rotor
the blower maintenance has been significantly simplified.
Noise level dB(A)

40 Spur
In the high-frequency range (200 to
5,000Hz), the noise is absorbed by the glass
Improved durability
8dB(A)

wool in the wall of the machine chamber for


both helical-type and spur-type rotors. The blower durability has been improved through the
30
use of a larger bearing and the lowering of motor speed,
Spur rotor as well as the reduction of temperature rise.
Helical

20 Outside machine
Variable Frequency Driver (VFD) controlled air flow rate
Noise value outside chamber
machine chamber
Calculated value
10
Helical rotor VFD control system permits the motor speed to be
easily changed electrically. When VFD control is used
Frequency (Hz) 50 100 500 1,000 5,000
with the blower, the air flow rate can be varied freely.
Also, by using a suitable control device with the blower,
In the low-frequency range (50 to 160Hz), it can be seen that the noise When installed near it is possible to implement automatic control of the
volume is higher for spur-type rotors than for helical-type rotors. This is the workplace or in blower. (The controllable range of motor speed depends
because noise in the low-frequency range is not absorbed by the glass wool apartment blocks,
and leaks outside the machine chamber. The low-noise design of ShinMaywa it can greatly reduce
upon blower working conditions. When using a VFD
helical blowers significantly reduce the amount of noise output in the the costs of with the blower, consult your nearest dealer.)
low-frequency band, which is the main cause of noise. This technological ability noise-reduction ※The VFD to be used should be a constant torque
provides a large difference in the amount of noise in the low-frequency range. measures.
type.

3
ARH-S・ARH-SP Series
Specifications ARH-S (m3/min) P:Power Requirements
Q:Air Flow Rate (kW)
Outlet Rotor 10kPa 15kPa 20kPa 25kPa 30kPa 35kPa 40kPa 45kPa 50kPa 55kPa 60kPa Standard Setting
Dia. Pulley Motor Output
Model Speed
(mm) No. (kW)
(min-1) Q P Q P Q P Q P Q P Q P Q P Q P Q P Q P Q P
1 1630 0.30 0.25 0.27 0.29 0.24 0.32 0.22 0.35 0.19 0.38 0.17 0.40 0.14 0.46 0.12 0.52 0.10 0.58 0.08 0.65 ― ―
20 ARH20S 0.4・0.75
2 1730 0.33 0.26 0.30 0.30 0.28 0.34 0.25 0.38 0.22 0.40 0.20 0.45 0.18 0.51 0.16 0.56 0.14 0.61 0.12 0.67 0.10 0.72
1 1940 0.38 0.28 0.35 0.31 0.32 0.35 0.29 0.40 0.27 0.44 0.24 0.49 0.22 0.53 0.20 0.58 0.18 0.63 0.16 0.69 0.14 0.75
2 2160 0.43 0.30 0.40 0.33 0.37 0.38 0.35 0.41 0.32 0.48 0.30 0.52 0.27 0.56 0.25 0.63 0.23 0.74 0.21 0.83 0.19 0.93
25 ARH25S 0.4・0.75・1.5
3 2400 0.51 0.35 0.48 0.40 0.45 0.43 0.42 0.48 0.39 0.53 0.37 0.58 0.34 0.65 0.32 0.75 0.30 0.86 0.28 0.97 0.26 1.07
4 2690 0.60 0.40 0.57 0.47 0.54 0.50 0.51 0.54 0.48 0.60 0.46 0.66 0.43 0.75 0.41 0.84 0.39 0.91 0.37 1.00 0.35 1.10
1 1240 0.48 0.53 0.43 0.57 0.38 0.61 0.33 0.64 0.27 0.68 0.22 0.71 0.17 0.74 ― ― ― ― ― ― ― ―
2 1480 0.62 0.57 0.57 0.62 0.52 0.67 0.47 0.70 0.41 0.75 0.36 0.95 0.32 1.13 0.28 1.18 0.24 1.23 ― ― ― ―
32 ARH32S 0.75・1.5
3 1740 0.76 0.60 0.71 0.64 0.66 0.69 0.61 0.79 0.55 1.00 0.50 1.10 0.46 1.22 0.42 1.24 0.38 1.27 0.34 1.30 ― ―
4 1910 0.86 0.64 0.81 0.69 0.76 0.75 0.71 0.90 0.66 1.05 0.61 1.15 0.57 1.25 0.53 1.35 0.49 1.42 0.45 1.49 ― ―
1 1720 0.83 0.61 0.78 0.66 0.72 0.72 0.67 0.92 0.60 1.11 0.56 1.17 0.50 1.24 0.45 1.26 0.41 1.29 0.37 1.32 ― ―
2 1840 0.87 0.64 0.82 0.69 0.77 0.76 0.74 0.95 0.67 1.14 0.63 1.20 0.58 1.28 0.55 1.35 0.50 1.42 0.46 1.49 ― ―
3 1960 0.95 0.71 0.91 0.77 0.86 0.85 0.80 1.03 0.76 1.20 0.71 1.27 0.67 1.35 0.63 1.43 0.58 1.50 0.53 1.61 ― ―
4 2210 1.16 0.77 1.10 0.87 1.04 0.99 0.99 1.11 0.93 1.24 0.88 1.33 0.83 1.45 0.78 1.50 0.73 1.76 0.68 1.84 0.63 1.99
40 ARH40S 5 2380 1.25 0.83 1.19 0.97 1.13 1.12 1.08 1.19 1.03 1.28 0.99 1.39 0.95 1.50 0.91 1.68 0.87 1.86 0.84 2.02 0.80 2.18 1.5・2.2・3.7
6 2520 1.34 0.95 1.28 1.08 1.22 1.20 1.17 1.28 1.12 1.35 1.08 1.45 1.04 1.55 1.00 1.76 0.96 1.96 0.93 2.13 0.90 2.30
7 2620 1.42 1.07 1.37 1.19 1.31 1.32 1.26 1.36 1.21 1.42 1.17 1.55 1.12 1.70 1.09 1.89 1.05 2.08 1.03 2.25 1.00 2.41
8 2790 1.52 1.15 1.46 1.29 1.40 1.40 1.36 1.45 1.31 1.50 1.27 1.66 1.23 1.82 1.20 2.01 1.16 2.20 1.14 2.39 1.11 2.57
9 3000 1.61 1.30 1.55 1.40 1.49 1.50 1.45 1.64 1.40 1.78 1.36 1.92 1.32 2.06 1.28 2.20 1.24 2.33 1.21 2.51 1.18 2.69
1 1270 1.27 0.7 1.17 0.8 1.09 1.0 1.02 1.1 0.95 1.3 0.88 1.5 0.81 1.7 0.74 1.8 0.67 2.0 ― ― ― ―
2 1400 1.53 0.9 1.43 1.0 1.34 1.2 1.25 1.3 1.17 1.4 1.09 1.7 1.01 1.8 0.93 1.9 0.86 2.1 ― ― ― ―
3 1650 1.85 1.0 1.74 1.2 1.64 1.3 1.54 1.4 1.44 1.7 1.35 1.8 1.27 2.0 1.19 2.2 1.11 2.5 1.04 2.7 0.98 2.9
50 ARH50S 1.5・2.2・3.7
4 1850 2.23 1.1 2.11 1.3 1.98 1.4 1.87 1.6 1.76 1.8 1.68 2.0 1.59 2.2 1.51 2.5 1.43 2.7 1.35 2.9 1.28 3.1
5 2080 2.54 1.2 2.45 1.5 2.35 1.7 2.26 1.9 2.17 2.1 2.08 2.4 1.99 2.6 1.92 2.8 1.84 3.0 1.76 3.2 1.69 3.4
6 2230 2.77 1.3 2.68 1.6 2.59 1.9 2.51 2.1 2.43 2.3 2.36 2.6 2.28 2.8 2.21 3.1 2.13 3.3 2.06 3.4 ― ―
1 1100 1.64 0.9 1.57 1.1 1.49 1.3 1.41 1.5 1.34 1.7 1.27 1.9 1.20 2.1 1.13 2.2 1.07 2.6 1.01 2.8 ― ―
2 1320 2.22 1.2 2.12 1.4 2.03 1.6 1.94 1.8 1.86 2.0 1.78 2.2 1.70 2.4 1.62 2.7 1.53 3.0 1.45 3.2 1.37 3.4
3 1550 2.72 1.3 2.62 1.6 2.53 1.8 2.44 2.0 2.35 2.2 2.26 2.5 2.17 2.8 2.07 3.0 1.98 3.3 1.89 3.5 1.79 3.7
4 1730 3.12 1.5 3.01 1.8 2.91 2.0 2.81 2.2 2.71 2.7 2.61 2.9 2.52 3.2 2.44 3.4 2.36 3.7 2.30 3.9 2.23 4.2
65 ARH65S 2.2・3.7・5.5・7.5
5 1960 3.50 1.7 3.37 2.0 3.26 2.2 3.14 2.7 3.03 3.1 2.92 3.3 2.83 3.6 2.75 3.9 2.67 4.1 2.61 4.3 2.55 4.6
6 2200 3.77 1.9 3.70 2.2 3.62 2.4 3.54 2.8 3.46 3.2 3.39 3.7 3.32 4.1 3.26 4.5 3.20 4.9 3.15 5.2 3.09 5.4
7 2350 4.11 2.2 4.03 2.3 3.94 2.5 3.87 3.0 3.79 3.5 3.74 4.0 3.68 4.4 3.63 4.8 3.58 5.1 3.53 5.5 3.48 6.0
8 2500 4.38 2.4 4.29 2.6 4.20 2.8 4.12 3.3 4.04 3.7 3.97 4.2 3.90 4.7 3.84 5.2 3.77 5.7 3.73 6.1 3.68 6.5
1 1130 3.21 1.4 3.10 1.7 2.99 2.1 2.88 2.4 2.77 2.8 2.65 3.1 2.54 3.5 2.43 3.7 2.32 4.3 2.21 4.7 2.09 5.1
2 1350 3.81 1.8 3.70 2.1 3.60 2.5 3.50 2.8 3.40 3.2 3.30 3.6 3.19 4.1 3.09 4.5 2.99 5.0 2.89 5.5 2.79 6.1
3 1490 4.22 2.1 4.11 2.4 4.01 2.8 3.91 3.2 3.81 3.6 3.71 4.0 3.60 4.5 3.50 5.0 3.40 5.5 3.30 6.1 3.20 6.6
4 1630 4.70 2.2 4.58 2.7 4.47 3.2 4.36 3.6 4.25 4.1 4.13 4.5 4.02 5.0 3.91 5.5 3.80 6.0 3.69 6.6 3.57 7.2
80 ARH80S 5 1730 5.02 2.3 4.90 2.8 4.79 3.4 4.68 3.7 4.57 4.3 4.45 4.7 4.34 5.2 4.25 5.9 4.15 6.5 4.06 7.1 3.96 7.5 3.7・5.5・7.5・11
6 1830 5.34 2.4 5.22 3.0 5.11 3.5 5.00 4.1 4.89 4.6 4.78 5.1 4.66 5.5 4.58 6.2 4.49 6.8 4.40 7.4 4.31 8.0
7 2040 5.74 2.8 5.63 3.4 5.52 4.0 5.44 4.6 5.35 5.2 5.29 5.6 5.22 6.2 5.16 6.9 5.09 7.5 5.03 8.1 4.97 8.6
8 2150 6.07 3.0 5.96 3.7 5.85 4.2 5.77 4.8 5.68 5.3 5.62 6.0 5.55 6.6 5.49 7.4 5.43 7.8 5.37 8.5 5.30 9.1
9 2270 6.39 3.5 6.31 4.1 6.22 4.6 6.14 5.2 6.05 5.8 5.96 6.6 5.87 7.3 5.81 7.8 5.74 8.5 5.68 9.1 5.62 9.7
1 1020 4.29 2.3 4.11 2.7 3.94 3.1 3.75 3.4 3.58 3.7 3.43 4.0 3.30 4.4 3.17 5.1 3.03 5.5 2.90 6.2 2.77 6.8
2 1200 5.19 2.5 5.04 3.0 4.89 3.5 4.74 4.0 4.58 4.5 4.44 5.0 4.31 5.5 4.19 6.2 4.08 6.8 3.98 7.4 3.88 8.1
3 1390 5.94 2.9 5.79 3.4 5.64 3.9 5.49 4.4 5.33 4.9 5.19 5.5 5.06 6.2 4.94 6.9 4.83 7.6 4.73 8.4 4.63 9.2
100 ARH100S 5.5・7.5・11
4 1490 6.44 3.3 6.29 3.8 6.14 4.4 5.99 4.9 5.83 5.4 5.69 6.0 5.56 6.8 5.44 7.5 5.33 8.2 5.23 9.0 5.13 9.8
5 1630 7.39 3.9 7.24 4.4 7.09 4.9 6.94 5.4 6.78 5.9 6.65 6.8 6.53 7.5 6.43 8.5 6.33 9.4 6.23 10.3 6.13 11.0
6 1830 8.69 4.6 8.54 5.0 8.39 5.4 8.24 6.2 8.08 7.1 7.93 8.0 7.78 8.9 7.62 9.8 7.47 10.7 ― ― ― ―

4
ARH-S・ARH-SP
Series

Specifications ARH-S (m3/min) P:Power Requirements


Q:Air Flow Rate (kW)
Outlet Rotor 10kPa 15kPa 20kPa 25kPa 30kPa 35kPa 40kPa 45kPa 50kPa 55kPa 60kPa Standard Setting
Dia. Pulley Motor Output
Model Speed
(mm) No. (kW)
(min-1)
Q P Q P Q P Q P Q P Q P Q P Q P Q P Q P Q P
1 1160 7.58 2.5 7.35 3.4 7.11 4.3 6.88 5.0 6.64 5.8 6.41 6.7 6.17 7.6 5.94 8.5 5.70 9.4 5.46 10.3 5.23 11.3
2 1290 8.67 3.4 8.43 4.0 8.19 4.7 7.95 5.4 7.71 6.3 7.47 7.2 7.23 8.2 6.99 9.1 6.75 10.1 6.51 11.2 6.26 12.3
3 1370 9.29 3.9 9.06 4.4 8.83 4.9 8.59 5.7 8.37 6.7 8.13 7.7 7.91 8.5 7.67 9.5 7.44 10.7 7.21 11.8 6.98 13.0 7.5・11・15・
ARH125S 4 1460 10.0 4.2 9.77 4.6 9.53 5.1 9.30 6.0 9.06 7.1 8.84 8.1 8.60 9.2 8.37 10.2 8.14 11.3 7.91 12.5 7.67 13.9 18.5
5 1540 10.7 4.4 10.4 5.0 10.2 5.7 9.98 6.6 9.76 7.7 9.53 8.8 9.31 10.0 9.08 11.0 8.86 12.1 8.64 13.4 8.41 14.8
6 1710 12.0 4.7 11.8 5.4 11.5 6.2 11.3 7.4 11.1 8.6 10.9 9.7 10.7 10.9 10.5 12.3 10.3 13.8 10.1 15.1 9.84 16.5
7 1920 13.9 5.1 13.6 5.9 13.4 6.8 13.2 8.2 13.0 9.7 12.7 10.9 12.5 12.2 12.3 13.2 12.1 14.5 11.8 16.2 11.6 18.1
1 1160 9.93 3.5 9.50 4.5 9.14 5.4 8.82 6.4 8.54 7.4 8.27 8.4 8.02 9.4 7.76 10.4 7.52 11.4 7.30 12.4 ― ―
2 1290 11.0 3.8 10.6 4.9 10.2 6.0 9.89 7.1 9.58 8.2 9.30 9.3 9.03 10.4 8.77 11.5 8.53 12.7 8.31 13.9 ― ―
3 1370 12.0 4.1 11.6 5.3 11.3 6.5 10.9 7.7 10.6 8.9 10.3 10.1 10.0 11.3 9.75 12.5 9.46 13.7 9.11 14.9 ― ―
125 11・15・18.5・
ARH125SA 4 1460 12.8 4.5 12.4 5.7 12.0 6.9 11.6 8.2 11.3 9.5 11.0 10.7 10.7 12.0 10.4 13.3 10.2 14.6 9.97 15.9 ― ―
22
5 1540 13.7 4.8 13.3 6.1 13.0 7.4 12.6 8.8 12.3 10.2 12.0 11.5 11.7 12.9 11.4 14.3 11.2 15.6 11.0 16.9 ― ―
6 1710 15.1 5.5 14.7 7.0 14.3 8.4 14.0 9.9 13.7 11.4 13.4 12.9 13.1 14.3 12.8 15.9 12.6 17.4 12.3 18.9 ― ―
7 1920 17.0 6.4 16.7 8.1 16.4 9.8 16.2 11.4 15.9 13.0 15.7 14.8 15.5 16.6 15.2 18.3 14.9 19.9 14.6 21.6 ― ―
1 1000 12.9 6.7 12.7 7.5 12.4 8.3 12.2 9.2 12.0 10.1 11.7 11.0 11.5 11.9 11.3 13.4 11.0 15.0 10.8 16.8 10.6 18.7
2 1060 13.7 7.1 13.5 7.9 13.3 8.7 13.1 9.7 12.9 10.8 12.6 11.7 12.4 12.7 12.2 14.4 12.0 16.1 11.8 17.8 11.6 19.7
3 1130 14.8 7.9 14.6 8.6 14.4 9.4 14.1 10.3 13.9 11.4 13.7 12.6 13.5 14.0 13.2 15.7 13.0 17.3 12.8 18.9 12.6 20.8 15・18.5・22・
ARH125SF
4 1210 15.9 8.1 15.7 9.0 15.5 9.9 15.3 11.1 15.1 12.2 14.8 13.8 14.6 15.3 14.4 16.8 14.2 18.5 14.0 20.3 13.8 22.2 30
5 1300 17.0 8.5 16.8 9.5 16.6 10.5 16.4 11.6 16.2 12.8 16.0 14.6 15.8 16.5 15.6 18.1 15.4 19.8 15.2 21.6 15.0 23.5
6 1420 18.8 9.1 18.6 10.1 18.4 11.1 18.2 12.4 18.0 13.8 17.8 16.1 17.7 18.2 17.5 20.1 17.3 22.0 17.2 23.7 17.0 25.5
1 1000 12.9 6.7 12.7 7.5 12.4 8.3 12.2 9.2 12.0 10.1 11.7 11.0 11.5 11.9 11.3 13.4 11.0 15.0 10.8 16.8 10.6 18.7
2 1060 13.7 7.1 13.5 7.9 13.3 8.7 13.1 9.7 12.9 10.8 12.6 11.7 12.4 12.7 12.2 14.4 12.0 16.1 11.8 17.8 11.6 19.7
3 1130 14.8 7.9 14.6 8.6 14.4 9.4 14.1 10.3 13.9 11.4 13.7 12.6 13.5 14.0 13.2 15.7 13.0 17.3 12.8 18.9 12.6 20.8
4 1210 15.9 8.1 15.7 9.0 15.5 9.9 15.3 11.1 15.1 12.2 14.8 13.8 14.6 15.3 14.4 16.8 14.2 18.5 14.0 20.3 13.8 22.2
5 1300 17.0 8.5 16.8 9.5 16.6 10.5 16.4 11.6 16.2 12.8 16.0 14.6 15.8 16.5 15.6 18.1 15.4 19.8 15.2 21.6 15.0 23.5
15・18.5・22・
150 ARH150S 6 1420 18.8 9.1 18.6 10.1 18.4 11.1 18.2 12.4 18.0 13.8 17.8 16.1 17.7 18.2 17.5 20.1 17.3 22.0 17.2 23.7 17.0 25.5
30・37
7 1510 19.9 9.5 19.7 10.6 19.5 11.8 19.4 13.5 19.2 15.3 19.0 17.2 18.8 19.3 18.6 21.2 18.5 23.2 18.3 24.9 18.1 26.8
8 1590 21.1 9.9 20.9 11.1 20.7 12.4 20.5 14.3 20.3 16.4 20.1 18.3 20.0 20.4 19.8 22.5 19.6 24.7 19.4 26.7 19.2 28.7
9 1680 22.5 10.5 22.3 11.6 22.1 12.8 21.9 15.1 21.7 17.4 21.5 19.7 21.3 21.9 21.1 24.2 20.9 26.5 20.7 28.8 20.5 31.1
10 1770 24.1 11.9 23.9 12.7 23.7 13.7 23.4 16.3 23.2 18.8 23.0 21.2 22.8 23.6 22.5 26.1 22.3 28.5 22.1 30.6 21.9 33.0
11 1940 26.9 12.2 26.7 14.4 26.4 16.6 26.2 18.8 25.9 21.4 25.7 24.0 25.5 26.9 25.2 30.2 24.9 33.6 24.7 35.4 ― ―
1 1000 24.3 5.7 23.7 8.1 23.1 10.5 22.6 12.9 22.1 15.3 21.6 17.7 21.1 20.1 20.7 22.5 20.3 24.9 19.9 27.3 19.5 29.7
2 1100 26.7 7.2 26.1 9.9 25.5 12.6 25.0 15.3 24.5 18.0 24.0 20.7 23.6 23.4 23.2 26.1 22.8 28.8 22.4 31.5 22.0 34.2
3 1240 30.1 8.3 29.5 11.3 28.9 14.3 28.4 17.3 27.9 20.3 27.4 23.3 26.9 26.3 26.5 29.2 26.1 32.1 25.7 35.0 25.3 37.9
4 1360 33.0 10.1 32.4 13.3 31.8 16.5 31.3 19.7 30.8 22.9 30.3 26.1 29.8 29.3 29.4 32.5 29.0 35.7 28.6 38.9 28.2 42.0 18.5・22・30・
200 ARH200S
5 1440 35.2 11.2 34.6 14.6 34.0 18.0 33.5 21.4 33.0 24.8 32.5 28.2 32.0 31.6 31.6 35.0 31.2 38.4 30.8 41.8 30.4 45.2 37・45・55
6 1530 37.6 12.0 37.0 15.7 36.4 19.4 35.8 23.1 35.2 26.8 34.7 30.5 34.2 34.2 33.7 37.9 33.3 41.5 32.9 45.1 ― ―
7 1660 40.6 13.1 40.0 17.0 39.4 20.9 38.8 24.8 38.2 28.7 37.6 32.6 37.1 36.5 36.6 40.4 36.1 44.3 ― ― ― ―
8 1750 44.0 14.4 43.4 18.5 42.8 22.6 42.2 26.7 41.7 30.8 41.2 34.9 40.7 39.0 40.2 43.1 39.8 47.2 ― ― ― ―
Notes: (1) The air flow rate (measured according to JIS B8341) indicates the volume of air on the suction side.
(2) Air flow rate tolerance: ±5%
(3) Blower Rotation Speed is for reference.
(4) Consult us for any requirements not included in the table.

Specifications ARH-SP (m3/min) P:Power Requirements


Q:Air Flow Rate (kW)
Standard
Outlet Rotor 10kPa 15kPa 20kPa 25kPa 30kPa 35kPa 40kPa 45kPa 50kPa 55kPa 60kPa
Pulley Setting
Dia. Model Speed
No. Motor
(mm) (min-1)
Q P Q P Q P Q P Q P Q P Q P Q P Q P Q P Q P Output
5 2380 1.25 0.83 1.19 0.97 1.13 1.12 1.08 1.19 1.03 1.28 0.99 1.39 0.95 1.50 0.91 1.68 0.87 1.86 0.84 2.02 0.80 2.18
6 2520 1.34 0.95 1.28 1.08 1.22 1.20 1.17 1.28 1.12 1.35 1.08 1.45 1.04 1.55 1.00 1.76 0.96 1.96 0.93 2.13 0.90 2.30
50 ARH50SP 7 2620 1.42 1.07 1.37 1.19 1.31 1.32 1.26 1.36 1.21 1.42 1.17 1.55 1.12 1.70 1.09 1.89 1.05 2.08 1.03 2.25 1.00 2.41 1.5・2.2・3.7
8 2790 1.52 1.15 1.46 1.09 1.40 1.40 1.36 1.45 1.31 1.50 1.27 1.66 1.23 1.82 1.20 2.01 1.16 2.20 1.14 2.39 1.11 2.57
9 3000 1.61 1.30 1.55 1.40 1.49 1.50 1.45 1.64 1.40 1.78 1.36 1.92 1.32 2.06 1.28 2.20 1.24 2.33 1.21 2.51 1.18 2.69
4 1850 2.23 1.1 2.11 1.3 1.98 1.4 1.87 1.6 1.76 1.8 1.67 2.0 1.59 2.2 1.51 2.5 1.43 2.7 1.35 2.9 ― ―
65 ARH65SP 5 2080 2.54 1.2 2.45 1.5 2.35 1.7 2.26 1.9 2.17 2.1 2.08 2.4 1.99 2.6 1.91 2.8 1.84 3.0 1.76 3.2 ― ― 1.5・2.2・3.7
6 2230 2.77 1.3 2.68 1.6 2.59 1.9 2.51 2.1 2.43 2.3 2.36 2.6 2.28 2.8 2.21 3.1 2.13 3.3 2.06 3.4 ― ―
4 1730 3.12 1.5 3.01 1.8 2.91 2.0 2.81 2.2 2.71 2.7 2.61 2.9 2.52 3.2 2.42 3.4 2.36 3.7 2.30 3.9 2.23 4.2
5 1960 3.50 1.7 3.37 2.0 3.26 2.2 3.14 2.7 3.03 3.1 2.92 3.3 2.83 3.6 2.73 3.9 2.67 4.1 2.61 4.3 2.55 4.6
80 ARH80SP 6 2200 3.77 1.9 3.70 2.2 3.62 2.4 3.54 2.8 3.46 3.2 3.39 3.7 3.32 4.1 3.26 4.5 3.20 4.9 3.15 5.2 3.09 5.4 3.7・5.5・7.5
7 2350 4.11 2.2 4.03 2.3 3.94 2.5 3.87 3.0 3.79 3.5 3.74 4.0 3.68 4.4 3.63 4.8 3.58 5.1 3.53 5.5 3.48 6.0
8 2500 4.38 2.4 4.29 2.6 4.20 2.8 4.12 3.3 4.04 3.7 3.97 4.2 3.90 4.7 3.84 5.2 3.77 5.7 3.73 6.1 3.68 6.5
6 1830 5.34 2.4 5.22 3.0 5.11 3.5 5.00 4.1 4.89 4.6 4.77 5.1 4.66 5.5 4.58 6.2 4.49 6.8 4.40 7.4 4.31 8.0
7 2040 5.74 2.8 5.63 3.4 5.52 4.0 5.44 4.6 5.35 5.2 5.29 5.6 5.22 6.2 5.16 6.9 5.09 7.5 5.03 8.1 4.97 8.6
100 ARH100SP 5.5・7.5・11
8 2150 6.07 3.0 5.96 3.7 5.85 4.2 5.77 4.8 5.68 5.3 5.62 6.0 5.55 6.6 5.49 7.4 5.43 7.8 5.37 8.5 5.30 9.1
9 2270 6.39 3.5 6.31 4.1 6.22 4.6 6.14 5.2 6.05 5.8 5.96 6.6 5.87 7.3 5.81 7.8 5.74 8.5 5.68 9.1 5.62 9.7
Notes: (1) The air flow rate (measured according to JIS B8341) indicates the volume of air on the suction side.
(2) Air flow rate tolerance: ±5%
(3) Blower Rotation Speed is for reference.
(4) Consult us for any requirements not included in the table.

5
Performance Curve ARH-S
ARH20S ARH25S ARH32S
kPa ○:Pulley No. kPa ○:Pulley No. kPa ○:Pulley No.
2 1 2 3 4
60 60 60
1 3 4

2
50 50 50
1.5kW
Discharge Pressure

Discharge Pressure

Discharge Pressure
0.75kW 1
40 40 40
1.5kW

30 30 0.75kW 30
0.75kW
0.4kW
20 20 0.4kW 20

10 10 10
0 0.1 0.2 0.3 0.4 0.1 0.5 0 0.5
Air Flow
(m3/min) (m3/min)
Air Flow Air Flow
(m3/min)

ARH40S ARH50S ARH65S


○:Pulley No. ○:Pulley No. ○:Pulley No.
kPa kPa kPa
4 5 6 7 8 9 3 4 5 1 2 3 4 5 6 7 8
60 60 60
1 2 3 6 3.7kW
3.7kW 7.5kW
1 2
50 50 50
Discharge Pressure

Discharge Pressure

Discharge Pressure
3.7kW
2.2kW
40 40 40 5.5kW
2.2kW

1.5kW
30 30 30
2.2kW
1.5kW
20 20 20

10 10 10
0 0.5 1.0 1.5 0 1 2 3 1 2 3 4
(m3/min)
Air Flow Air Flow
(m3/min) Air Flow
(m3/min)

ARH80S ARH100S ARH125S


○:Pulley No. ○:Pulley No. ○:Pulley No.
kPa kPa kPa
1 2 3 4 5 6 7 8 9 1 2 3 4 5 1 2 3 4 5 6 7
60 60 60
11kW 18.5kW
6
50 5.5kW 50 50
Discharge Pressure

Discharge Pressure

Discharge Pressure

11kW 15kW
40 40 40
7.5kW

30 30 30
7.5kW 11kW
3.7kW
5.5kW
7.5kW
20 20 20

10 10 10
2 3 4 5 6 2 3 4 5 6 7 8 9 10 5 6 7 8 9 10 11 12 13 14
Air Flow
(m /min) 3
Air Flow
(m /min) 3
Air Flow
(m3/min)

ARH125SA ARH125SF
○:Pulley No. ○:Pulley No.
kPa kPa
1 2 3 4 5 6 7 1 2 3 4 5 6
60 60
30kW

50 22kW 50
22kW
Discharge Pressure

Discharge Pressure

40 18.5kW 40
18.5kW

30 15kW 30

15kW
20 11kW 20

10 10
7 8 9 10 11 12 13 14 15 16 17 18 10 11 12 13 14 15 16 17 18 19
Air Flow
(m3/min) Air Flow
(m3/min)

6
ARH-S・ARH-SP
Series

ARH150S ARH200S
kPa ○:Pulley No. kPa ○:Pulley No.
1 2 3 4 5 6 7 8 9 10 11 1 2 3 4 5
60 60
6
37kW 7 8
50 50 55kW
Discharge Pressure

Discharge Pressure
45kW
40 40
30kW
37kW
30 30
22kW
30kW
15kW
20 18.5kW 20
22kW
18.5kW

10 10
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 18 20 22 24 26 28 30 32 34 36 38 40 42 44
Air Flow
(m3/min) Air Flow
(m3/min)

Performance Curve ARH-SP


ARH50SP ARH65SP ARH80SP
kPa ○:Pulley No. kPa ○:Pulley No. kPa ○:Pulley No.
5 6 7 8 9 4 5 6 4 5 6 7 8
60 60 60
3.7kW 7.5kW

50 50 50
Discharge Pressure

Discharge Pressure

Discharge Pressure

3.7kW

40 40 40 5.5kW
2.2kW

30 30 30
1.5kW 2.2kW
3.7kW
20 20 20

1.5kW

10 10 10
0.5 1.0 1.5 1 2 3 2 3 4 5
Air Flow
(m /min) 3
Air Flow
(m /min)
3
Air Flow
(m3/min)

ARH100SP
kPa ○:Pulley No. .
6 7 8 9
60

11kW
50
Discharge Pressure

Notes:
40
(1) The air flow rate indicates the volume of air on the suction side.
7.5kW (2) Air flow rate tolerance: ±5%
30 (3) Consult us for any requirements not included in the table.
(4) For indoor use only. Consult us for outdoor applications.
(5) Specifications are subject to change without notice.
20 5.5kW (6) Please prepare IE1 / IE2 motor by yourself.
Since ShinMaywa cannot supply IE1 / IE2 motor due to
Japanese regulation.
10
4 5 6 7
Air Flow
(m3/min)

7
Sound Levels [dB(A)] [dB(A)]
Rotor Discharge Pressure (kPa) Rotor Discharge Pressure (kPa)
Model Pulley Speed Model Pulley Speed
No. (min−1) No. (min−1)
10 20 30 40 50 60 10 20 30 40 50 60
1 1630 58 59 60 61 61 ー 5 2380 70 71 71 71 72 74
ARH20S
2 1730 60 61 62 63 63 64 6 2520 70 71 71 72 72 74
1 1940 62 63 63 64 64 65 ARH50SP 7 2620 71 71 72 72 73 74
2 2160 63 63 64 65 65 66 8 2790 71 72 72 73 73 75
ARH25S
3 2400 63 64 65 66 66 67 9 3000 71 72 72 73 74 75
4 2690 65 66 67 68 68 69 4 1850 70 70 71 72 73 74
1 1240 65 66 67 68 ー ー ARH65SP 5 2080 70 71 72 73 74 75
2 1480 66 67 68 69 70 ー 6 2230 72 74 74 74 75 75
ARH32S 71
3 1740 67 68 69 70 ー 4 1730 67 68 69 71 73 73
4 1910 69 70 71 72 73 ー 5 1960 67 69 71 72 74 75
1 1720 66 67 68 69 70 ー ARH80SP 6 2200 68 70 71 72 74 75
2 1840 67 68 70 71 72 ー 7 2350 70 71 72 73 74 76
3 1960 69 70 71 71 72 ー 8 2500 72 73 74 75 75 76
4 2210 70 71 71 71 72 73 6 1830 75 76 77 78 79 80
ARH40S 5 2380 70 71 71 71 72 74 7 2040 76 77 78 79 79 80
6 2520 70 71 71 72 72 74 ARH100SP 8 2150 77 78 78 79 79 80
7 2620 71 71 72 72 73 74 9 2270 77 78 79 79 79 80
8 2790 71 72 72 73 73 75
74 (1)
9 3000 71 72 72 73 75
1 1270 63 64 66 67 69 ー
71 (2)
2 1400 66 66 68 70 ー
3 1650 69 70 71 72 73 74 (3) Blower Rotation Speed is for reference.
ARH50S 4 1850 70 70 71 72 73 74
5 2080 70 71 72 73 74 75
6 2230 72 74 74 74 75 75
1 1100 66 67 68 68 69 ー
2 1320 66 67 68 69 71 72

Sectional View
3 1550 66 67 69 70 72 73
4 1730 67 68 69 71 73 73
ARH65S
5 1960 67 69 71 72 74 75
6 2200 68 70 71 72 74 75
7 2350 70 71 72 73 74 76
8 2500 72 73 74 75 75 76
1 1130 70 71 72 73 74 75
2
3
1350
1490
71
72
71
73
73
73
74
75
75
76
76
77
6 12 11 10-1 8-1 5 2
4 1630 73 74 75 76 77 78
ARH80S 5 1730 74 75 76 76 78 79
6 1830 75 76 77 78 79 80
7 2040 76 77 78 79 79 80 9
8 2150 77 78 78 79 79 80
9 2270 77 78 79 79 79 80
1 1020 71 72 73 74 75 76 3
2 1200 72 73 74 76 76 78
3 1390 74 74 75 77 78 79
ARH100S 78
4 1490 75 76 77 79 80
5 1630 76 77 78 79 80 80
6 1830 77 78 79 80 81 ー 10-2
1 1160 72 73 74 75 75 76
2 1290 72 73 74 75 76 76
3 1370 73 74 75 76 77 77
ARH125S 4 1460 73 74 75 76 77 78
5 1540 74 75 76 77 78 79
6 1710 75 76 77 78 79 81 8-2
7 1920 76 77 78 79 81 82 7-2
1 1160 72 74 75 76 77 ー
2 1290 73 75 77 78 79 ー
3 1370 73 75 78 78 79 ー
ARH125SA 4
5
1460
1540
73
74
75
76
78
79
79
79
80
80


7-1 4 1 13
6 1710 75 76 79 79 80 ー
7 1920 77 79 80 81 82 ー
1 1000 72 73 74 75 77 78
2 1060 72 73 74 75 77 78
3 1130 73 74 75 76 78 79 Ball bearing
ARH125SF 78
4 1210 74 75 76 79 80 Ball bearing
5 1300 75 76 77 79 80 81
6 1420 76 77 78 80 81 82 SS400/SPHC/SPCC
1 1000 72 73 74 75 77 78
2 1060 72 73 74 75 77 78
76
Rotor housing
3 1130 73 74 75 78 79
4 1210 74 75 76 78 79 80 Seal box SS400
5 1300 75 76 77 79 80 81
ARH150S 6 1420 76 77 78 80 81 82
7 1510 77 78 80 81 82 83
8 1590 77 79 81 82 83 84 Notes:
9 1680 79 80 81 82 83 84 (1) For Models ARH20S, ARH25S, ARH32S, ARH40S and ARH50SP, bearing plate No.3 and rotor
10 1770 81 82 83 84 85 86 housing No.5 are constructed as one piece.
11 1940 83 84 85 85 86 87 (2) ARH125SF ∙ 150S ∙ 200S : Rotor is made of FC200 (helical portion) and S45C (shaft portion).
1 1000 79 79 81 82 84 85 ARH20S–125SA : Helical and shaft are manufactured of FCD500 in one piece parts.
2 1100 79 80 82 84 86 87 (3) Use Shell Stamina Grease RL2 to replenish grease every three months.
3 1240 79 80 82 84 86 87 (4) Completely replace gear oil with VG 220 gear oil every three months.
4 1360 79 80 82 84 86 87 (The blower is shipped with Shell Omara S2G 220.)
5 1440 80 81 83 85 86 87 (5) Bearings of ARH20S–125S are special ones. Be sure to replace them with genuine ones upon
ARH200S
6 1530 82 82 83 85 86 ー overhaul. (Never use a commercialize bearings.)
7 1660 84 85 86 87 88 ー
8 1750 85 86 88 89 91 ー

Standard Motors(TEFC indoor type, IE1/IE2)


Applicable Motor Output (kW) Applicable Motor Output (kW)
Model Model 5.5
0.4 0.75 1.5 2.2 3.7 5.5 7.5 11 15 18.5 22 30 37 45 55 1.5 2.2 3.7 7.5 11
ARH20S ○ ○ ARH50SP ○ ○ ○
ARH25S ○ ○ ○ ARH65SP ○ ○ ○
ARH32S ○ ○ ARH80SP ○ ○ ○
ARH40S ○ ○ ○ ARH100SP ○ ○ ○
ARH50S ○ ○ ○

Standard Accessories
ARH65S ○ ○ ○ ○
ARH80S ○ ○ ○ ○
ARH100S ○ ○ ○
ARH125S ○ ○ ○ ○ ・Common Base ........................................................................... 1
ARH125SA ○ ○ ○ ○ ・V-pulley, V-belt, Belt Cover....................................................... 1
ARH125SF ○ ○ ○ ○ ・Pressure Gauge (160 kPa, with gauge cock and R1/4 setscrew)... 1
ARH150S ○ ○ ○ ○ ○
ARH200S ○ ○ ○ ○ ○ ○
・Inlet Silencer (with filter)........................................................ 1
・Safety Valve (with check valve) ............................................. 1
• Star-delta starting is available for motors 5.5kW and over.
• Please prepare IE1/IE2 motor by yourself.

8
ARH-S・ARH-SP
Series

Dimensions
Dimensions with anti-vibration base

H N P H N P

A
*See Notes(2) *See Notes(2)
φW

φW


G G V
φU
Q×φR K L M
E F V
J E F K L M
C D S×φT
C D J

Model Outlet dia A B C D E F G H J K L M N P Q R S T U V W Weight


(mm) (kg)
ARH20S 20 456 133 53 256 22
430 350 25 ー 300 13 110 164 124 156 12 20 ー ー
ARH25S 25 (511) (188) 25 228 (26)
12
ARH32S 32 741 135 487 125 74 135 45
340 ー 215 290 130 130 173 221
ARH40S 40 (841) (235) (479) (129) (70) 140 (53)
25 20
ARH50S 50 809 137 556 120 400 78 ー 207 175 125 202 228 4 155 70
(909) (237) (548) (124) (74) (79)
330
ARH65S 65 948 147 636 138 460 88 ー 245 174 126 212 234 4 175 100
(1,047)(246) (628) (142) (84) (111)
15 13
3.7∼7.5kW 1,009 155 704 82 ー 360 172 158 209 13 22 140
(1,108)(254) (696) 164 (78) (152)
ARH80S 80 294 247 185
995 143 (168) 145
11kW 540 165 245 219
(1,094)(242) 722 91 (160)
270 440 35
(714) (87)
ARH100S 100 1,098 150 151 (̶)
281 221 189 288 289 210 170
(1,197)(249) (155) (184)

ARH125S 125 1,297 788 266 700 44 350 470 234 196 372 395 280
(1,396) 193 (780) (270) (40) (295)
411 24
(292)
ARH125SA 125 1,323 788 260 710 40 355 520 265 215 390 435 6 14 250 315
(1,422) (332)
14
ARH125SF 125 238 491 20 6 580
1,695 205 980 (240) 53 (598)
800 400 570 270 260 370 447 40
(1,793)(303) (976) (51)
ARH150S 150 298 551 280 590
(300) (608)
26
ARH200S 200 1.668 274 1,100 370 900 100 450 560 700 406 254 511 566 18.5 18.5 90 330 800
(1,866)(472)(1,260) (290) (180) (521) (895)

Model Outlet dia Weight


(mm) A B C D E F G H J K L M N P Q R S T U V W (kg)

ARH50SP 50 741 135 487 120 340 74 ー 210 290 130 130 173 221 155 45
(841) (235) (479) (124) (70) (53)
25 16
ARH65SP 65 809 137 556 125 400 78 ー 212 175 125 202 228 175 70
(909) (237) (548) (129) (74) (79)
330 4
ARH80SP 80 948 147 636 153 460 88 ー 260 15 174 126 212 234 13 4 13 185 100
(1,047)(246) (628) (157) (84) (111)

5.5, 7.5kW 100 1,009 155 704 82 ー 360 172 158 209 35 18 140
(1,108)(254) (696) 164 (78) (152)
ARH100SP 540 294 247 210
(168)
11kW 100 995 143 722 91 270 440 165 245 219 6 145
(1,094)(242) (714) (87) (̶) (160)

Notes:
(1) The safety valve discharge outlet of ARH20S and 25S have Rc3/4 and G1 female thread respectively rather than flange.
(2) Bolt hole diameter and pitch of the discharge flange comply with JIS B2239 : 10K flange.
(3) For indoor use only. Consult us regarding outdoor applications.
(4) Dimensions of the blower with the anti-vibration base are shown in parentheses. * The weight excludes the weight of the motor and motor base.
(5) L-type inlet silencer specifications (option) for low ceilings are also available.
(6) Dimensions are when Japanese-brand motor (previous IE1/IE2) is mounted.

Setup example
(L-type inlet silencer specifications)

9
ARH-E・ARH-EP Series
Specifications ARH-E (m3/min) P:Power Requirements
Q:Air Flow Rate (kW)
Outlet Rotor 10kPa 15kPa 20kPa 25kPa 30kPa 35kPa 40kPa 45kPa 50kPa 55kPa 60kPa Standard Setting
Dia. Pulley Motor Output
Model Speed
(mm) No. (kW)
(min-1) Q P Q P Q P Q P Q P Q P Q P Q P Q P Q P Q P
1 1630 0.30 0.25 0.27 0.29 0.24 0.32 0.22 0.35 0.19 0.38 0.17 0.40 0.14 0.46 0.12 0.52 0.10 0.58 0.08 0.65 ー ー
20 ARH20E 0.4・0.75
2 1730 0.33 0.26 0.30 0.30 0.28 0.34 0.25 0.38 0.22 0.40 0.20 0.45 0.18 0.51 0.16 0.56 0.14 0.61 0.12 0.67 0.10 0.72
1 1940 0.38 0.25 0.35 0.30 0.32 0.35 0.30 0.40 0.28 0.46 0.26 0.51 0.24 0.56 0.22 0.61 0.19 0.66 0.17 0.71 0.15 0.75
2 2180 0.44 0.28 0.41 0.34 0.38 0.39 0.37 0.46 0.35 0.51 0.32 0.57 0.30 0.62 0.27 0.68 0.25 0.73 0.23 0.80 0.21 0.85
25 ARH25E 3 2440 0.51 0.32 0.48 0.38 0.46 0.45 0.44 0.51 0.42 0.57 0.39 0.63 0.36 0.69 0.34 0.75 0.32 0.82 0.30 0.88 0.28 0.94 0.4・0.75・1.5
4 2580 0.54 0.34 0.53 0.41 0.50 0.48 0.48 0.54 0.45 0.60 0.43 0.67 0.41 0.73 0.39 0.80 0.37 0.86 0.34 0.93 0.31 0.99
5 2730 0.59 0.36 0.57 0.44 0.54 0.51 0.51 0.57 0.49 0.64 0.46 0.71 0.44 0.75 0.42 0.85 0.40 0.91 0.37 0.98 0.35 1.0
1 1200 0.49 0.35 0.43 0.42 0.38 0.49 0.32 0.56 0.27 0.63 0.21 0.70 0.16 0.75 ー ー ー ー ー ー ー ー
2 1440 0.67 0.41 0.61 0.50 0.55 0.59 0.49 0.67 0.43 0.75 0.39 0.85 0.33 0.93 0.28 1.0 0.23 1.1 ー ー ー ー
32 ARH32E 0.75・1.5
3 1710 0.86 0.49 0.80 0.59 0.74 0.70 0.68 0.81 0.63 0.91 0.57 1.00 0.51 1.1 0.46 1.2 0.40 1.3 0.34 1.4 ー ー
4 1860 0.94 0.53 0.88 0.64 0.82 0.75 0.77 0.88 0.71 0.99 0.66 1.10 0.59 1.2 0.54 1.3 0.49 1.4 0.45 1.5 ー ー
1 1680 0.83 0.46 0.78 0.56 0.72 0.66 0.67 0.77 0.62 0.87 0.57 0.97 0.52 1.1 0.47 1.2 0.42 1.3 0.37 1.4 ー ー
2 1820 0.90 0.50 0.85 0.61 0.80 0.72 0.75 0.84 0.69 0.95 0.65 1.1 0.60 1.2 0.55 1.3 0.50 1.4 0.46 1.5 ー ー
3 1920 0.98 0.53 0.93 0.65 0.87 0.77 0.82 0.89 0.77 1.0 0.72 1.1 0.67 1.2 0.62 1.4 0.58 1.5 0.54 1.6 ー ー
4 2200 1.16 0.63 1.10 0.76 1.05 0.89 0.99 1.0 0.94 1.2 0.89 1.3 0.84 1.4 0.79 1.5 0.74 1.7 0.70 1.9 0.65 2.0
40 ARH40E 5 2370 1.26 0.68 1.21 0.83 1.16 0.97 1.11 1.1 1.06 1.3 1.01 1.4 0.95 1.5 0.92 1.7 0.88 1.8 0.84 2.0 0.80 2.1 1.5・2.2・3.7
6 2520 1.36 0.73 1.30 0.89 1.25 1.0 1.19 1.2 1.14 1.3 1.09 1.5 1.06 1.7 1.02 1.8 0.97 2.0 0.93 2.1 0.88 2.3
7 2690 1.45 0.79 1.40 0.96 1.35 1.1 1.29 1.3 1.24 1.4 1.21 1.6 1.16 1.8 1.11 1.9 1.06 2.1 1.02 2.3 0.97 2.4
8 2840 1.55 0.85 1.49 1.00 1.44 1.2 1.39 1.4 1.33 1.5 1.31 1.7 1.24 1.9 1.21 2.1 1.16 2.2 1.10 2.4 1.06 2.6
9 3020 1.65 0.92 1.60 1.10 1.54 1.3 1.52 1.4 1.47 1.7 1.42 1.8 1.36 2.0 1.31 2.2 1.27 2.4 1.22 2.6 1.17 2.8
1 1240 1.32 0.58 1.24 0.73 1.17 0.88 1.10 1.0 1.03 1.2 0.96 1.3 0.89 1.5 0.84 1.6 0.77 1.8 ー ー ー ー
2 1390 1.52 0.66 1.44 0.83 1.36 1.0 1.28 1.2 1.21 1.3 1.15 1.5 1.08 1.7 1.03 1.8 0.96 2.0 ー ー ー ー
3 1680 1.86 0.83 1.78 1.0 1.70 1.2 1.63 1.4 1.56 1.6 1.48 1.8 1.43 2.0 1.38 2.2 1.31 2.4 1.25 2.6 1.17 2.8
50 ARH50E 4 1770 1.97 0.89 1.89 1.1 1.82 1.3 1.74 1.5 1.68 1.7 1.63 1.9 1.56 2.2 1.50 2.4 1.43 2.6 1.36 2.8 1.29 3.0 1.5・2.2・3.7
5 1870 2.11 0.95 2.02 1.2 1.94 1.4 1.90 1.6 1.83 1.8 1.76 2.1 1.70 2.3 1.63 2.5 1.56 2.7 1.49 3.0 1.42 3.2
6 2100 2.39 1.1 2.31 1.3 2.24 1.6 2.20 1.9 2.13 2.1 2.06 2.4 2.00 2.6 1.92 2.8 1.86 3.1 1.78 3.3 1.71 3.6
7 2390 2.77 1.3 2.68 1.6 2.61 1.9 2.53 2.2 2.47 2.4 2.40 2.7 2.32 3.0 2.25 3.3 2.18 3.5 2.11 3.7 ー ー
1 1140 1.80 0.75 1.72 0.95 1.64 1.1 1.56 1.3 1.48 1.5 1.40 1.7 1.32 1.9 1.24 2.1 1.16 2.3 1.08 2.5 ー ー
2 1350 2.24 0.90 2.15 1.1 2.06 1.4 1.98 1.6 1.91 1.8 1.83 2.1 1.75 2.3 1.67 2.5 1.59 2.8 1.51 3.0 1.43 3.2
3 1550 2.63 1.0 2.54 1.3 2.46 1.6 2.38 1.8 2.29 2.1 2.22 2.4 2.15 2.6 2.06 2.9 1.98 3.2 1.90 3.4 1.82 3.7
4 1770 3.10 1.2 2.99 1.5 2.90 1.8 2.81 2.1 2.73 2.4 2.64 2.8 2.55 3.1 2.48 3.4 2.40 3.7 2.32 4.0 2.25 4.3
65 ARH65E 2.2・3.7・5.5・7.5
5 1980 3.50 1.4 3.37 1.7 3.27 2.1 3.19 2.4 3.09 2.8 3.03 3.1 2.94 3.5 2.87 3.8 2.79 4.2 2.71 4.5 2.63 4.8
6 2250 3.93 1.6 3.84 2.0 3.77 2.4 3.69 2.8 3.60 3.2 3.52 3.6 3.45 4.0 3.36 4.4 3.29 4.8 3.20 5.2 3.13 5.5
7 2400 4.22 1.7 4.14 2.1 4.08 2.5 3.99 3.0 3.90 3.4 3.83 3.8 3.75 4.3 3.67 4.7 3.58 5.1 3.53 5.5 3.42 6.0
8 2540 4.53 1.8 4.44 2.3 4.35 2.7 4.26 3.2 4.17 3.6 4.10 4.1 4.02 4.6 3.93 5.0 3.85 5.5 3.77 5.9 3.69 6.4
1 1170 3.27 1.3 3.17 1.7 3.07 2.0 2.97 2.4 2.87 2.7 2.78 3.0 2.68 3.4 2.58 3.7 2.49 4.1 2.39 4.4 2.30 4.7
2 1370 3.93 1.6 3.83 2.0 3.73 2.4 3.63 2.8 3.53 3.2 3.43 3.6 3.34 4.0 3.24 4.4 3.14 4.8 3.04 5.2 2.94 5.6
3 1520 4.39 1.8 4.28 2.3 4.18 2.7 4.08 3.2 3.97 3.6 3.88 4.1 3.79 4.5 3.69 5.0 3.59 5.4 3.49 5.9 3.39 6.3
4 1620 4.69 2.0 4.59 2.5 4.48 2.9 4.38 3.4 4.29 3.9 4.19 4.4 4.08 4.9 3.98 5.3 3.88 5.8 3.78 6.3 3.68 6.8
80 ARH80E 5 1710 5.02 2.1 4.90 2.6 4.79 3.2 4.68 3.7 4.57 4.2 4.47 4.7 4.37 5.2 4.27 5.7 4.17 6.2 4.07 6.7 3.97 7.2 3.7・5.5・7.5・11
6 1810 5.34 2.3 5.22 2.8 5.11 3.4 5.00 3.9 4.90 4.5 4.80 5.0 4.69 5.5 4.60 6.1 4.50 6.6 4.40 7.1 4.32 7.8
7 2010 5.95 2.6 5.84 3.2 5.76 3.8 5.65 4.4 5.54 5.0 5.45 5.7 5.35 6.3 5.24 6.9 5.14 7.4 5.07 8.2 5.00 8.8
8 2130 6.31 2.8 6.20 3.5 6.11 4.1 6.01 4.8 5.90 5.4 5.80 6.1 5.70 6.7 5.60 7.3 5.51 8.1 5.44 8.7 5.35 9.4
9 2250 6.66 3.0 6.56 3.7 6.46 4.4 6.37 5.1 6.27 5.8 6.16 6.5 6.06 7.1 6.01 7.9 5.93 8.6 5.84 9.3 5.74 10.0
1 1000 4.53 1.5 4.42 2.0 4.29 2.5 4.17 3.0 4.05 3.4 3.93 3.9 3.81 4.4 3.69 4.8 3.57 5.3 3.45 5.8 3.33 6.3
2 1110 5.19 1.7 5.04 2.3 4.90 2.8 4.78 3.3 4.65 3.9 4.53 4.4 4.41 4.9 4.29 5.4 4.17 6.0 4.04 6.5 3.93 7.0
3 1280 6.04 2.1 5.91 2.7 5.78 3.3 5.65 4.0 5.53 4.6 5.40 5.2 5.29 5.8 5.16 6.4 5.08 7.0 4.99 7.7 4.88 8.4
100 ARH100E 5.5・7.5・11
4 1420 6.76 2.4 6.64 3.1 6.52 3.8 6.40 4.5 6.26 5.2 6.14 5.9 6.02 6.5 5.90 7.2 5.79 8.0 5.73 8.7 5.61 9.4
5 1550 7.44 2.7 7.32 3.4 7.19 4.2 7.05 5.0 6.93 5.7 6.81 6.5 6.68 7.2 6.56 8.1 6.44 8.8 6.32 9.6 6.20 10.3
6 1820 8.73 3.3 8.60 4.2 8.47 5.1 8.34 6.0 8.21 6.9 8.08 7.9 7.98 8.8 7.92 9.7 7.79 10.6 ー ー ー ー
* Efficiency class of 0.4kW motors used for ARH20E/ARH25E blowers are not IE3.

10
ARH-E・ARH-EP
Series

Specifications ARH-E (m3/min) P:Power Requirements


Q:Air Flow Rate (kW)
Outlet Rotor 10kPa 15kPa 20kPa 25kPa 30kPa 35kPa 40kPa 45kPa 50kPa 55kPa 60kPa Standard Setting
Dia. Pulley Motor Output
Model Speed
(mm) No. (kW)
(min-1)
Q P Q P Q P Q P Q P Q P Q P Q P Q P Q P Q P
1 1150 7.63 2.5 7.44 3.3 7.25 4.0 7.05 4.8 6.85 5.6 6.65 6.3 6.45 7.1 6.35 7.9 6.18 8.7 6.00 9.5 5.85 10.2
2 1290 8.70 2.9 8.50 3.8 8.30 4.6 8.10 5.5 7.88 6.4 7.70 7.2 7.55 8.2 7.40 9.0 7.25 9.9 7.05 10.8 6.85 11.7
3 1390 9.41 3.2 9.21 4.1 9.01 5.1 8.81 6.0 8.61 6.9 8.53 8.0 8.35 8.9 8.16 9.97.98 10.8 7.82 11.8 7.64 12.7
7.5・11・15・
ARH125E 4 1470 10.0 3.4 9.79 4.4 9.59 5.4 9.38 6.4 9.18 7.3 9.08 8.4 8.94 9.4 8.76 10.4 8.58 11.4 8.40 12.4 8.21 13.4 18.5
5 1570 10.7 3.7 10.5 4.8 10.3 5.8 10.1 6.9 9.9 8.0 9.87 9.1 9.69 10.2 9.52 11.3 9.33 12.3 9.15 13.4 8.97 14.4
6 1730 12.0 4.2 11.8 5.4 11.5 6.5 11.4 7.8 11.2 9.0 11.0 10.2 10.9 11.3 10.7 12.5 10.5 13.7 10.3 14.9 10.1 16.1
7 1960 13.8 4.9 13.5 6.2 13.3 7.5 13.2 9.0 13.0 10.4 12.7 11.7 12.5 13.0 12.3 14.4 12.2 15.8 12.0 17.1 11.8 18.4
1 1170 10.0 3.1 9.70 4.1 9.45 5.1 9.20 6.1 8.95 7.1 8.70 8.2 8.45 9.2 8.20 10.2 7.94 11.2 7.68 12.2 ー ー
2 1280 11.0 3.5 10.7 4.6 10.5 5.8 10.2 6.9 10.0 8.0 9.70 9.1 9.50 10.3 9.20 11.4 9.00 12.5 8.70 13.6 ー ー
3 1400 12.0 4.0 11.7 5.2 11.4 6.4 11.2 7.7 10.9 8.9 10.7 10.1 10.4 11.4 10.1 12.6 9.93 13.8 9.68 15.0 ー ー
125 11・15・18.5・
ARH125EA 4 1470 12.8 4.3 12.4 5.6 12.1 6.9 11.8 8.2 11.6 9.5 11.3 10.8 11.1 12.1 10.8 13.4 10.6 14.7 10.4 16.1 ー ー
22.2
5 1600 13.7 4.9 13.4 6.3 13.2 7.7 12.9 9.1 12.6 10.5 12.4 11.9 12.1 13.3 11.9 14.7 11.7 16.2 11.4 17.7 ー ー
6 1740 15.1 5.5 14.7 7.0 14.4 8.6 14.1 10.1 13.8 11.7 13.6 13.2 13.3 15.0 13.1 16.4 12.8 17.9 12.6 19.4 ー ー
7 1990 17.0 6.8 16.7 8.5 16.4 10.3 16.2 12.1 15.9 13.9 15.8 15.7 15.6 17.5 15.3 19.3 15.0 21.0 ー ー ー ー
1 980 13.0 4.8 12.7 6.1 12.5 7.3 12.2 8.5 12.0 9.8 11.8 11.0 11.5 12.2 11.3 13.5 11.0 14.7 10.8 16.0 10.6 17.2
2 1060 14.3 5.3 14.1 6.7 13.8 8.0 13.6 9.4 13.3 10.8 13.1 12.1 12.8 13.5 12.6 14.8 12.4 16.3 12.2 17.6 11.9 19.0
3 1120 15.2 5.6 15.0 7.1 14.7 8.5 14.5 10.0 14.2 11.4 14.0 12.9 13.7 14.3 13.5 15.9 13.3 17.3 13.0 18.8 12.8 20.2 15・18.5・22・
ARH125EF
4 1180 16.1 5.9 15.9 7.5 15.6 9.0 15.3 10.6 15.1 12.1 14.8 13.6 14.6 15.3 14.4 16.8 14.2 18.3 14.0 19.9 13.8 21.4 30
5 1290 17.6 6.5 17.3 8.3 17.1 10.0 16.8 11.7 16.5 13.4 16.3 15.0 16.1 16.8 15.9 18.5 15.6 20.2 15.4 21.9 15.2 23.7
6 1390 19.1 7.1 18.8 9.0 18.6 10.9 18.4 12.8 18.2 14.6 18.0 16.6 17.8 18.5 17.5 20.3 17.3 22.2 17.0 24.1 16.8 26.0
1 980 13.0 4.8 12.7 6.1 12.5 7.3 12.2 8.5 12.0 9.8 11.8 11.0 11.5 12.2 11.3 13.5 11.0 14.7 10.8 16.0 10.6 17.2
2 1060 14.3 5.3 14.1 6.7 13.8 8.0 13.6 9.4 13.3 10.8 13.1 12.1 12.8 13.5 12.6 14.8 12.4 16.3 12.2 17.6 11.9 19.0
3 1120 15.2 5.6 15.0 7.1 14.7 8.5 14.5 10.0 14.2 11.4 14.0 12.9 13.7 14.3 13.5 15.9 13.3 17.3 13.0 18.8 12.8 20.2
4 1180 16.1 5.9 15.9 7.5 15.6 9.0 15.3 10.6 15.1 12.1 14.8 13.6 14.6 15.3 14.4 16.8 14.2 18.3 14.0 19.9 13.8 21.4
5 1290 17.6 6.5 17.3 8.3 17.1 10.0 16.8 11.7 16.5 13.4 16.3 15.0 16.1 16.8 15.9 18.5 15.6 20.2 15.4 21.9 15.2 23.7
15・18.5・22・
150 ARH150E 6 1390 19.1 7.1 18.8 9.0 18.6 10.9 18.4 12.8 18.2 14.6 18.0 16.6 17.8 18.5 17.5 20.3 17.3 22.2 17.0 24.1 16.8 26.0
30・37
7 1480 20.2 7.6 20.0 9.6 19.7 11.6 19.5 13.6 19.3 15.7 19.1 17.7 18.8 19.7 18.6 21.7 18.5 23.8 18.3 25.8 18.0 27.8
8 1570 21.4 8.1 21.2 10.3 20.9 12.4 20.6 14.6 20.5 16.8 20.2 19.0 20.0 21.1 19.8 23.3 19.6 25.5 19.4 27.6 19.2 29.8
9 1650 22.6 8.6 22.4 11.0 22.1 13.3 21.9 15.6 21.7 17.9 21.5 20.2 21.3 22.6 21.1 24.9 20.9 27.2 20.7 29.5 20.5 31.9
10 1770 24.2 9.4 23.9 11.9 23.7 14.4 23.5 17.0 23.2 19.5 23.0 22.0 22.8 24.5 22.6 27.0 22.3 29.5 22.1 32.1 21.9 34.6
11 1980 27.1 10.6 26.9 13.5 26.7 16.4 26.4 19.3 26.2 22.3 25.9 25.1 25.6 28.0 25.3 30.9 25.1 33.8 24.8 36.7 ー ー
1 1010 24.3 5.7 23.7 8.1 23.1 10.5 22.6 12.9 22.1 15.3 21.6 17.7 21.1 20.1 20.7 22.5 20.3 24.9 19.9 27.3 19.5 29.7
2 1110 26.7 7.2 26.1 9.9 25.5 12.6 25.0 15.3 24.5 18.0 24.0 20.7 23.6 23.4 23.2 26.1 22.8 28.8 22.4 31.5 22.0 34.2
3 1260 30.1 8.3 29.5 11.3 28.9 14.3 28.4 17.3 27.9 20.3 27.4 23.3 26.9 26.3 26.5 29.2 26.1 32.1 25.7 35.0 25.3 37.9
4 1370 33.0 10.1 32.4 13.3 31.8 16.5 31.3 19.7 30.8 22.9 30.3 26.1 29.8 29.3 29.4 32.5 29.0 35.7 28.6 38.9 28.2 42.0 18.5・22・30・
200 ARH200E
5 1480 35.2 11.2 34.6 14.6 34.0 18.0 33.5 21.4 33.0 24.8 32.5 28.2 32.0 31.6 31.6 35.0 31.2 38.4 30.8 41.8 30.4 45.2 37・45・55
6 1570 37.6 12.0 37.0 15.7 36.4 19.4 35.8 23.1 35.2 26.8 34.7 30.5 34.2 34.2 33.7 37.9 33.3 41.5 32.9 45.1 ー ー
7 1670 40.6 13.1 40.0 17.0 39.4 20.9 38.8 24.8 38.2 28.7 37.6 32.6 37.1 36.5 36.6 40.4 36.1 44.3 ー ー ー ー
8 1770 44.0 14.4 43.4 18.5 42.8 22.6 42.2 26.7 41.7 30.8 41.2 34.9 40.7 39.0 40.2 43.1 39.8 47.2 ー ー ー ー
Notes: (1) The air flow rate (measured according to JIS B8341) indicates the volume of air on the suction side.
(2) Air flow rate tolerance: ±5%
(3) Blower Rotation Speed is for reference.
(4) Consult us for any requirements not included in the table.

Specifications ARH-EP (m3/min) P:Power Requirements


Q:Air Flow Rate (kW)
Outlet Rotor 10kPa 15kPa 20kPa 25kPa 30kPa 35kPa 40kPa 45kPa 50kPa 55kPa 60kPa Standard Setting
Dia. Pulley Motor Output
Model Speed
(mm) No. (kW)
(min-1) Q P Q P Q P Q P Q P Q P Q P Q P Q P Q P Q P
5 2370 1.26 0.68 1.21 0.83 1.16 0.97 1.11 1.1 1.06 1.3 1.01 1.4 0.95 1.5 0.92 1.7 0.88 1.8 0.84 2.0 0.80 2.1
6 2520 1.36 0.73 1.30 0.89 1.25 1.0 1.19 1.2 1.14 1.3 1.09 1.5 1.06 1.7 1.02 1.8 0.97 2.0 0.93 2.1 0.88 2.3
50 ARH50EP 7 2690 1.45 0.79 1.40 0.96 1.35 1.1 1.29 1.3 1.24 1.4 1.21 1.6 1.16 1.8 1.11 1.9 1.06 2.1 1.02 2.3 0.97 2.4 1.5・2.2・3.7
8 2840 1.55 0.85 1.49 1.0 1.44 1.2 1.39 1.4 1.33 1.5 1.31 1.7 1.24 1.9 1.21 2.1 1.16 2.2 1.10 2.4 1.06 2.6
9 3020 1.65 0.92 1.60 1.1 1.54 1.3 1.52 1.4 1.47 1.7 1.42 1.8 1.36 2.0 1.31 2.2 1.27 2.4 1.22 2.6 1.17 2.8
4 1770 1.97 0.89 1.89 1.1 1.82 1.3 1.74 1.5 1.68 1.7 1.63 1.9 1.56 2.2 1.50 2.4 1.43 2.6 1.36 2.8 1.29 3.0
5 1870 2.11 0.95 2.02 1.2 1.94 1.4 1.90 1.6 1.83 1.8 1.76 2.1 1.70 2.3 1.63 2.5 1.56 2.7 1.49 3.0 1.42 3.2
65 ARH65EP 1.5・2.2・3.7
6 2100 2.39 1.1 2.31 1.3 2.24 1.6 2.20 1.9 2.13 2.1 2.06 2.4 2.00 2.6 1.92 2.8 1.86 3.1 1.78 3.3 1.71 3.6
7 2390 2.77 1.3 2.68 1.6 2.61 1.9 2.53 2.2 2.47 2.4 2.40 2.7 2.32 3.0 2.25 3.3 2.18 3.5 2.11 3.7 ー ー
4 1770 3.10 1.2 2.99 1.5 2.90 1.8 2.81 2.1 2.73 2.4 2.64 2.8 2.55 3.1 2.48 3.4 2.40 3.7 2.32 4.0 2.25 4.3
5 1980 3.50 1.4 3.37 1.7 3.27 2.1 3.19 2.4 3.09 2.8 3.03 3.1 2.94 3.5 2.87 3.8 2.79 4.2 2.71 4.5 2.63 4.8
80 ARH80EP 6 2250 3.93 1.6 3.84 2.0 3.77 2.4 3.69 2.8 3.60 3.2 3.52 3.6 3.45 4.0 3.36 4.4 3.29 4.8 3.20 5.2 3.13 5.5 3.7・5.5・7.5
7 2400 4.22 1.7 4.14 2.1 4.08 2.5 3.99 3.0 3.90 3.4 3.83 3.8 3.75 4.3 3.67 4.7 3.58 5.1 3.53 5.5 3.42 6.0
8 2540 4.53 1.8 4.44 2.3 4.35 2.7 4.26 3.2 4.17 3.6 4.10 4.1 4.02 4.6 3.93 5.0 3.85 5.5 3.77 5.9 3.69 6.4
6 1810 5.34 2.3 5.22 2.8 5.11 3.4 5.00 3.9 4.90 4.5 4.80 5.0 4.69 5.5 4.60 6.1 4.50 6.6 4.40 7.1 3.68 7.8
7 2010 5.95 2.6 5.84 3.2 5.76 3.8 5.65 4.4 5.54 5.0 5.45 5.7 5.35 6.3 5.24 6.9 5.14 7.4 5.07 8.2 3.97 8.8
100 ARH100EP 5.5・7.5・11
8 2130 6.31 2.8 6.20 3.5 6.11 4.1 6.01 4.8 5.90 5.4 5.80 6.1 5.70 6.7 5.60 7.3 5.51 8.1 5.44 8.7 4.32 9.4
9 2250 6.66 3.0 6.56 3.7 6.46 4.4 6.37 5.1 6.27 5.8 6.16 6.5 6.06 7.1 6.01 7.9 5.93 8.6 5.84 9.3 5.00 10.0
Notes: (1) The air flow rate (measured according to JIS B8341) indicates the volume of air on the suction side.
(2) Air flow rate tolerance: ±5%
(3) Blower Rotation Speed is for reference.
(4) Consult us for any requirements not included in the table.

11
Performance Curve ARH-E
ARH20E ARH25E ARH32E
kPa ○:Pulley No. kPa ○:Pulley No. kPa ○:Pulley No.
2 1 2 3 4 5
60 60 60
1 3 4

2
50 50 50
1.5kW
Discharge Pressure

Discharge Pressure

Discharge Pressure
0.75kW 1
40 40 40
1.5kW

30 30 0.75kW 30
0.75kW
0.4kW
20 20 0.4kW 20

10 10 10
0 0.1 0.2 0.3 0.4 0.1 0.2 0.3 0.4 0.5 0.6 0 0.5 1.0
Air Flow
(m3/min) (m3/min)
Air Flow Air Flow
(m3/min)

ARH40E ARH50E ARH65E


○:Pulley No. ○:Pulley No. ○:Pulley No.
kPa kPa kPa
4 5 6 7 8 9 3 4 5 6 2 3 4 5 6 7 8
60 60 60
1 2 3 3.7kW 7 1 7.5kW
1 2
50 50 50
2.2kW
Discharge Pressure

Discharge Pressure

Discharge Pressure
3.7kW
40 40 40 5.5kW
2.2kW

1.5kW
30 30 30
2.2kW 3.7kW
1.5kW
20 20 20

10 10 10
0.5 1.0 1.5 0.5 1.0 1.5 2.0 2.5 3.0 1.0 2.0 3.0 4.0 5.0
(m3/min)
Air Flow Air Flow
(m3/min) Air Flow
(m3/min)

ARH80E ARH100E ARH125E


○:Pulley No. ○:Pulley No. ○:Pulley No.
kPa kPa kPa
1 2 3 4 5 6 7 8 9 1 2 3 4 5 1 2 3 4 5 6 7
60 60 60
11kW 18.5kW
6

50 50 50
Discharge Pressure

Discharge Pressure

Discharge Pressure

11kW 15kW
40 40 40
7.5kW

30 30 30
7.5kW 11kW
3.7kW
5.5kW
5.5kW 7.5kW
20 20 20

10 10 10
2.0 3.0 4.0 5.0 6.0 7.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 5 6 7 8 9 10 11 12 13 14 15
Air Flow
(m /min) 3
Air Flow
(m /min) 3
Air Flow
(m3/min)

ARH125EA ARH125EF
kPa
○:Pulley No. kPa ○:Pulley No.
1 2 3 4 5 6 1 2 3 4 5 6
60 60
30kW
7
50 22kW 50
22kW
Discharge Pressure

Discharge Pressure

40 18.5kW 40
18.5kW

30 15kW 30

11kW 15kW
20 20

10 10
7 8 9 10 11 12 13 14 15 16 17 18 10 11 12 13 14 15 16 17 18 19 20
Air Flow
(m3/min) Air Flow
(m3/min)

12
ARH-E・ARH-EP
Series

ARH150E ARH200E
kPa kPa
1 2 3 4 5 6 7 8 9 10 11 ○:Pulley No. 1 2 3 4 5 ○:Pulley No.
60 60
6

37kW 7 8
50 50 55kW
Discharge Pressure

Discharge Pressure
45kW
40 40
30kW

37kW
30 30
15kW 22kW
30kW
20 18.5kW 20 18.5kW
22kW

10 10
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 18 20 22 24 26 28 30 32 34 36 38 40 42 44
Air Flow
(m3/min) Air Flow
(m3/min)

Performance Curve ARH-EP


ARH50EP ARH65EP ARH80EP
○:Pulley No. ○:Pulley No. ○:Pulley No.
kPa kPa kPa
5 6 7 8 9 4 5 6 7 8
60 60 60
3.7kW 4 5 6 7 7.5kW

50 50 50
Discharge Pressure
Discharge Pressure
Discharge Pressure

3.7kW
40 40 40 5.5kW
2.2kW

30 30 30
1.5kW 2.2kW
3.7kW

20 20 20
1.5kW

10 10 10
1.0 1.5 1.0 1.5 2.0 2.5 3.0 2.0 2.5 3.0 3.5 4.0 4.5 5.0
3 3
Air Flow
(m /min) Air Flow
(m /min) (m3/min)
Air Flow

ARH100EP
kPa
○:Pulley No.
6 7 8 9
60

11kW
50
Discharge Pressure

40
7.5kW
Notes:
30
(1) The air flow rate indicates the volume of air on the suction side.
(2) Air flow rate tolerance: ±5%
20 5.5kW (3) Consult us for any requirements not included in the table.
(4) For indoor use only. Consult us for outdoor applications.
(5) Specifications are subject to change without notice.
10
4.0 4.5 5.0 5.5 6.0 6.5 7.0
Air Flow
(m3/min)

13
Sound Levels [dB(A)] [dB(A)]
Rotor Discharge Pressure (kPa) Rotor Discharge Pressure (kPa)
Model Pulley Speed Model Pulley Speed
No. (min−1) No. (min−1)
10 20 30 40 50 60 10 20 30 40 50 60
1 1630 58 59 60 61 61 ー 5 2370 70 71 71 71 72 74
ARH20E
2 1730 60 61 62 63 63 64 6 2520 70 71 71 72 72 74
1 1940 62 63 63 64 64 65 ARH50EP 7 2690 71 72 72 73 73 75
2 2180 63 64 65 66 66 67 8 2840 71 72 72 73 74 75
ARH25E 3 2440 64 65 66 67 67 68 9 3020 71 72 72 73 74 75
4 2580 65 66 67 68 68 69 4 1770 70 70 71 72 73 74
5 2730 66 67 68 69 69 70 5 1870 70 71 72 73 74 75
65 67 68 ー ARH65EP 6 2100 71 72 73 74 75 75
1 1200 66 ー
2 1440 66 67 68 69 70 ー 7 2390 73 75 75 75 76 ー
ARH32E
3 1710 67 68 69 70 71 ー 4 1770 67 69 70 72 74 74
4 1860 69 70 71 72 73 ー 5 1980 68 70 71 72 74 75
1 1680 66 67 68 69 70 ー ARH80EP 6 2250 69 71 72 73 74 76
2 1820 67 68 70 71 72 ー 7 2400 71 72 73 74 75 76
3 1920 69 70 71 71 72 ー 8 2540 73 74 75 76 76 77
4 2200 70 71 71 71 72 73 6 1810 75 76 77 78 79 80
ARH40E 5 2370 70 71 71 71 72 74 7 2010 76 77 78 79 79 80
ARH100EP 79 80
6 2520 70 71 71 72 72 74 8 2130 77 78 78 79
7 2690 71 72 72 73 73 75 9 2250 77 78 79 79 79 80
8 2840 71 72 72 73 74 75 (1)
9 3020 71 72 72 73 74 75
1 1240 63 64 66 67 69 ー (2)
2 1390 66 66 68 70 71 ー
70 72 73 (3) Blower Rotation Speed is for reference.
3 1680 70 71 74
ARH50E 4 1770 70 70 71 72 73 74
5 1870 70 71 72 73 74 74
6 2100 71 72 73 74 75 75
7 2390 73 75 75 75 76 ー
1 1140 66 67 68 68 69 ー
2 1350 66 67 69 70 71 72

Sectional View
3 1550 66 67 69 70 72 73
4 1770 67 69 70 72 74 74
ARH65E
5 1980 68 70 71 72 74 75
6 2250 69 71 72 73 74 76
7 2400 71 72 73 74 75 76
8 2540 73 74 75 76 76 77
1 1170 70 71 72 73 74 75
2
3
1370
1520
72
73
72
74
73
74
74
76
75
77
76
78
6 12 11 10-1 8-1 5 2
4 1620 73 74 75 76 77 78
ARH80E 5 1710 74 75 76 76 78 79
6 1810 75 76 77 78 79 80
7 2010 76 77 78 79 79 80 9
8 2130 77 78 78 79 79 80
9 2250 77 78 79 79 79 80
1 1000 71 72 73 74 75 76 3
2 1110 72 73 74 75 76 77
3 1280 73 74 75 77 77 79
ARH100E 79
4 1420 75 75 76 78 80
5 1550 76 77 78 79 80 80
6 1820 77 78 79 80 81 ー 10-2
1 1150 72 73 74 75 75 76
2 1290 72 73 74 75 76 76
3 1390 73 74 75 76 77 77
ARH125E 4 1470 74 74 75 76 77 78
5 1570 75 76 76 77 78 79
6 1730 76 77 77 78 79 81 8-2
7 1960 77 78 78 79 81 83 7-2
1 1170 72 74 75 76 77 ー
2 1280 73 75 77 78 79 ー
3 1400 73 75 78 79 80 ー
ARH125EA 4
5
1470
1600
73
75
75
76
78
79
79
79
80
80


7-1 4 1 13
6 1740 76 77 79 80 81 ー
7 1990 77 78 80 81 82 ー
1 980 72 73 74 75 77 78
2 1060 72 73 74 75 77 78
3 1120 73 74 75 76 78 79 Ball bearing
ARH125EF 79
4 1180 74 75 76 78 80 Ball bearing
5 1290 75 76 77 79 80 81
6 1390 76 77 78 80 81 82 SS400/SPHC/SPCC
1 980 72 73 74 75 77 78
2 1060 72 73 74 75 77 78
Rotor housing
3 1120 73 74 75 76 78 79
4 1180 74 75 76 78 79 80 Seal box SS400
5 1290 75 76 77 79 80 81
ARH150E 6 1390 76 77 78 80 81 82
7 1480 77 78 80 81 82 83
8 1570 77 79 81 82 83 84 Notes:
9 1650 79 80 81 82 83 84 (1) For Models ARH20E, ARH25E, ARH32E, ARH40E and ARH50EP, bearing plate No.3 and rotor
10 1770 81 82 83 84 85 86 housing No.5 are constructed as one piece.
11 1980 84 85 86 86 87 88 (2) ARH125EF ∙ 150E ∙ 200E : Rotor is made of FC200 (helical portion) and S45C (shaft portion).
1 1010 79 79 81 82 84 85 ARH20E–125EA : Helical and shaft are manufactured of FCD500 in one piece parts.
2 1110 79 80 82 84 86 87 (3) Use Shell Stamina Grease RL2 to replenish grease every three months.
3 1260 79 80 82 84 86 87 (4) Completely replace gear oil with VG 220 gear oil every three months.
ARH200E 84
4 1370 79 80 82 86 87 (The blower is shipped with Shell Omara S2G 220.)
5 1480 81 82 83 85 86 87 (5) Bearings of ARH20E–125E are special ones. Be sure to replace them with genuine ones upon
6 1570 82 83 84 85 86 ー overhaul. (Never use a commercialize bearings.)
7 1670 84 85 86 87 88 ー
8 1770 85 86 88 89 91 ー

Standard Motors(TEFC indoor type)


Applicable Motor Output (kW) Applicable Motor Output (kW)
Model Model 5.5
0.4 0.75 1.5 2.2 3.7 5.5 7.5 11 15 18.5 22 30 37 45 55 1.5 2.2 3.7 7.5 11
ARH20E ○ ○ ARH50EP ○ ○ ○
ARH25E ○ ○ ○ ARH65EP ○ ○ ○
ARH32E ○ ○ ARH80EP ○ ○ ○
ARH40E ○ ○ ○ ARH100EP ○ ○ ○
ARH50E ○ ○ ○
○ ○ ○ ○
Standard Accessories
ARH65E
ARH80E ○ ○ ○ ○
ARH100E ○ ○ ○ ・Common Base ............................................................................ 1
ARH125E ○ ○ ○ ○
ARH125EA ○ ○ ○ ○ ・V-pulley, V-belt, Belt Cover ........................................................ 1
ARH125EF ○ ○ ○ ○ ・Pressure Gauge (160 kPa, with gauge cock and R1/4 setscrew) .... 1
ARH150E ○ ○ ○ ○ ○ ・Inlet Silencer (with filter) ......................................................... 1
ARH200E ○ ○ ○ ○ ○ ○ ・Safety Valve (with check valve) .............................................. 1
Star-delta starting is available for motors 5.5kW and over. ・IP44-compliant TEFC Motor (indoor type) with base. ............. 1

14
ARH-E・ARH-EP
Series

Dimensions
Dimensions with anti-vibration base

(*R) (*R)

J P Q J P Q

A
*See Notes(2) *See Notes(2)
φX

φX


H H W
φU
S×φT L M N
F G W
K F G L M N
(*E) C D U×φV
(*E) C D K

Model Outlet dia A B C D E F G H J K L M N P Q R S T U V W X Weight


(mm) (kg)
ARH20E 20 456 133 69(69) 53 256 175 22
430 350 25 ー 300 13 110 164 124 156 12 12 ー ー
ARH25E 25 (511) (188) 83(83) 25 228 194 (26)
ARH32E 32 761 135 487 125 24(28) 340 74 ー 135 45
ー 215 290 130 130 173 221
ARH40E 40 (861) (235) (479) (129) 48(52) (70) 229 140 (53)
20
ARH50E 50 828 137 556 120 44 400 78 ー 207 175 125 202 228 ー 4 155 70
(928) (237) (548) (124) (48) (74) (79)
330
ARH65E 65 967 147 636 138 93 460 88 ー 245 174 126 212 234 293 4 175 100
(1,066)(246) (628) (142) (97) (84) (111)
15 13 13
3.7∼7.5kW 1,029 155 704 99 82 ー 360 172 158 209 291 22 140
(1,127)(254) (696) 164 (103) (78) (152)
ARH80E 80 294 247 185
1,162 143 (168) 115 145
11kW 540 165 245 219 417
(1,115)(242) 722 (119) 91 (160)
270 440
(714) (87)
ARH100E 100 1,117 150 151 122 281 221 189 288 289 361 210 170
(1,216)(249) (155) (126) (184)

ARH125E 125 1,297 788 266 164 700 44 350 470 234 196 372 395 ー 280
(1,396) 193 (780) (270) (168) (40) (295)
411 24
(292)
ARH125EA 125 1,324 788 260 217 710 40 355 520 265 215 390 435 ー 6 14 14 250 315
(1,423) (217) (332)

ARH125EF 125 238 491 20 6 580


1,695 205 980 (240) 195 53 (598)
800 400 570 270 260 370 447 490
(1,793)(303) (976) (197) (51)
ARH150E 150 298 551 280 590
(300) (608)
26
ARH200E 200 1.669 274 1,100 370 161 900 100 450 560 700 406 254 511 566 ー 18.5 18.5 330 800
(1,867)(472)(1,250) (290) (81) (180) (521) (895)

Model Outlet dia Weight


(mm) A B C D E F G H J K L M N P Q R S T U V W X (kg)

ARH50EP 50 761 135 487 120 48 340 74 ー 210 290 130 130 173 221 229 155 45
(861) (235) (479) (124) (52) (70) (53)
16
ARH65EP 65 828 137 556 125 44 400 78 ー 212 175 125 202 228 ー 175 70
(928) (237) (548) (129) (48) (74) (79)
330 4
ARH80EP 80 967 147 636 153 93 460 88 ー 260 15 174 126 212 234 293 13 4 13 185 100
(1,066)(246) (628) (157) (97) (84) (111)

5.5, 7.5kW 100 1,029 155 704 99 82 ー 360 172 158 209 291 18 140
(1,127)(254) (696) 164 (103) (78) (152)
ARH100EP 540 294 247 210
(168)
11kW 100 1,017 143 722 115 91 270 440 165 245 219 417 6 145
(1,115)(242) (714) (119) (87) (160)

Notes:
(1) The ARH20E/25E safety valve discharge outlet is a tubular parallel female thread rather than a flange.
(2) Bolt hole diameter and pitch of the discharge flange comply with JIS B2239 : 10K flange.
(3) This standard motor is Japanese-brand totally enclosed fan cooled motor (indoor type IP44). Use of a special motor or non-Japanese brand may require a different base size.
(4) For indoor use only. Consult us regarding outdoor applications.
(5) Dimensions of the blower with the anti-vibration base are shown in parentheses. * The weight excludes the weight of the motor and motor base.
(6) *E and *R dimensions are the maximum dimensions when equipped with the largest size of standard motor.
(7) L-type inlet silencer specifications (option) for low ceilings are also available.

Setup example
(L-type inlet silencer specifications)

15
Optional Accessories
Outlet Silencer Flexible joint
Type A Outlet Silencer Type B Outlet Silencer

nxφd nxφd

φC
φC

Nominal Diameter 20∼150mm Nominal Diameter 20·25 mm

nxφd

Nominal Weight

φC
Diameter(mm) (kg)

φC
Nominal Diameter 200mm

Nominal Diameter 32∼200mm


Nominal Weight
Diameter(mm) (kg)
Nominal Weight
Diameter(mm) (kg)

• Use the blower under discharge pressure less than 60 kPa.


• Outer diameter, hole pitch and hole diameter of discharge flange comply
with JIS B2239 : 10K flange.
• Material... Standard : Steel
Option : Stainless Steel

• Outer diameter, hole pitch and hole diameter of discharge flange comply
with JIS B2239 : 10K flange.
• Consult us for a nominal diameter of 250.
• Outer diameter, hole pitch and hole diameter of discharge flange
comply with JIS B2239 : 10K flange.

Vertical Outlet Silencer

Packing Size
■ARH-S/ARH-E (mm) ■ARH-SP/ARH-EP (mm)
Length Width Height Length Width Height
Model Model
L W H L W H
ARH20S / 20E ARH50SP / 50EP 750 530 800
ARH25S / 25E 520 460 300
ARH65SP / 65EP 850 610 820
ARH32S / 32E ARH80SP / 80EP 990 630 890
750 530 800
ARH40S / 40E 3.7∼7.5kW 1,080 700 930
ARH100SP / 100EP
ARH50S / 50E 850 610 820 11kW 1,200 790 1,000
ARH65S / 65E 990 630 890
3.7∼7.5kW 1,080 700 930
ARH80S / 80E
11kW 1,200 790 1,000
ARH100S / 100E 1,200 790 1,000
ARH125S / 125E 1,280 910 1,150
ARH125SA / 125EA 1,280 970 1,150
ARH125SF / 125EF 1,520 960 1,310
ARH150S / 150E 1,520 960 1,310
ARH200S / 200E 1,780 1,230 1,300

16
ARH-S・ARH-SP・ARH-E・ARH-EP
Series

General-purpose motor and VFD


Selecting (V/F control)
a VFD-Controlled
Model Ⓐ

VFD control is available for all models. Ⓑ



This feature allows precise control of
the air flow rate to accommodate water
treatment volumes that vary over
season and time.
Operation at excessively slow speeds with the VFD may
allow high-temperature compressed air to leak into the
suction side through Clearance (1) between rotors and
Clearance (2) between rotors and housing wall, as
illustrated below. This may result in a temperature rise Blower (b)
that exceeds the bearing temperature limit, resulting in a
blower failure.

General-purpose motor and VFD


(Vector control)
Both blowers (a) and (b) are usable within the range from Ⓐ to 60 Hz. The blowers are not usable below Ⓐ
because the blower temperature will rise.

Notes:Ⓐ indicates the lower limit of the frequency control


range based on the blower temperature rise.

1) Blower torque remains constant when the motor speed is reduced


because of the blower’s constant-torque characteristic.
2) When selecting a VFD, ensure the rated output of the VFD is equal to
or greater than the rated output of the motor.
3) The control range of the VFD starts at 60 Hz regardless of the
frequency of the power source. The control range depends on several
factors including the application, motor output, and model.

Consult us if you require VFD control. We can provide an VFD calculation sheet.

Differences between ARH-E type equipped with IE3 motor and type equipped with IE1 motor
(Points to note if replacing your previous model with the IE3 motor)

・・・

Significant differences in motor size and weight Increase in rated operating speed of motors

・・・
・・・
・・

• Motor outer dimensions: The frame size of IE3 motor does not differ from the IE1 • With the IE3 motor, the rated operating speed will increase. When

・・

motor, so it can be installed to the blower with IE1 motor. However, with the IE3 replacing an IE1 motor with an IE3 motor, the air volume and output power

・・

motor, the diameter and length of motor both tend to be larger. Because of this, the increase as a result of the increased operating speed. Customers using the

・・

outer dimensions will be larger for some models, and so check the matching motor at around the maximum rated current (95% or more of the rated
・・
・・

dimensions for cables, etc. and make sure that there is no interference with current), and looking into replacing their motors should notify ShinMaywa,
・・

surrounding equipment during installation. as there is a possibility that excessive power may be generated as a result
・・

• Motor weight: As mentioned above, the motor size is larger, and so the weight of the of the increased air volume.
・・

motor has also increased as a result. (However, there is no need to reselect the anti
・・・

vibration rubbers for ShinMaywa helical blowers as a result of this weight increase.)
・・
・・・

Comparison of starting current values between


・・
・・・

ShinMaywa typical IE1 and IE3 motors


・・

Starting current increased


・・・
・・・
・・・

• With the IE3 motor, the starting current tends to be larger. As a result of this, it will be 5.5kW(50Hz/60Hz) 150/131 203/167
・・・

necessary to inspect equipment such as circuit protector to make sure they are
・・・

7.5kW(50Hz/60Hz) 206/180 261/217


appropriate. In addition, it is also possible that the capacity of the electromagnetic



・・

switch may need to be changed when replacing the motor.



・・

* For details, contact to your dealer or ShinMaywa.



・・

17
Application example
• Examples of use

[MODELS USED]
ARH125S x 3 units
Used for aeration at sewage
treatment plant

Oxygenation of
Water treatment Transport of granules aquaculture ponds
Helical rotor Helical rotor
Helical rotor Blower Pellet Blower
Blower

Damper

Nozzle
Used for water purification and for Used for pneumatic transport of pelletized Used for oxygenation and stirring of the
stirring precipitates at water treatment raw materials such as vinyl chloride and water in aquaculture ponds for various
plants. polyethylene. (Suction type is also available) types of fish and shellfish. They are also
used for aquariums and fish tanks.

A Variety of Uses

Specifications and dimensions are subject to change without notice.

ShinMaywa Industries, Ltd.


International Business Group 3-2-43, Shitte, Tsurumi-ku, Yokohama, 230-0003, Japan
Sales & Marketing Dept., Fluid Div. Phone : +81-45-584-1322 Fax : +81-45-575-2286
E-mail : sales.eisui @shinmaywa.co.jp

ShinMaywa (America), Ltd. ShinMaywa (Asia) Pte. Ltd.


10737 Gateway West, Suite 240, 8 Burn Road, #14-10 Trivex,
El Paso, Texas 79935, U.S.A. Singapore 369977
Phone : +1-915-594-9862 Phone : +65-6224-0728
Fax : +1-915-594-9866 Fax : +65-6224-9678
E-mail : info@shinmaywaamerica.com E-mail : asia.ad@shinmaywa.com.sg

ShinMaywa (Shanghai) Trading Co., Ltd.


201107 Building 6, Lane 333, Zhujian Road,
Minhang District, Shanghai, China
Phone : +86-21-5296-2966
Fax : +86-21-5296-2970
E-mail : shanghai@shinmaywa.co.jp
,
http://www.shinmaywa.co.jp/english/products/pump.htm 17. 6 Z-W0019 Printed in Japan1.1

You might also like