Catalog Pompe Nocchi Submersibile

Submersible and submerged pumps
Drainage and sewage pumps

Technical data subject to change without notice.
PENTAIR WATER ITALY reserves the right to carry out modifications to its products at any time without having to provide prior
notice.
INDEX
MULTISTAGE CENTRIFUGAL
PRATIKA SUBMERSIBLE PUMPS FOR CLEAR WATER
6
4” MULTISTAGE CENTRIFUGAL SUBMERSIBLE PUMPS COMPLETE WITH

DOMINATOR 4 MOTOR
8
SUBMERSIBLE MULTISTAGE CENTRIFUGAL PUMP

DOMINATOR 5 FOR CLEAR WATER
10

SCM 4 Plus MOTOR
12

SCM 4 HF 400 MOTOR
21
SCM 4 Plus / HF PUMP-

SUBMERSIBLE PUMPS 23
END
4” SUBMERSIBLE MOTORS FOR SCM 4 PLUS
4” MOTORS NEMA SPEC WITH PART ELECTRICAL CABLE
25
SA 6” MULTISTAGE SUBMERSIBLE PUMPS COMPLETE WITH MOTOR 26
SA PUMP-ENDS 6” SUBMERSIBLE PUMPS 31
6” MOTORS ELECTRIC MOTORS Ø 6” FOR SUBMERSIBLE PUMPS 32
DP SUBMERSIBLE PUMPS FOR DRAINING CLEAR WATER 35
SIMER “SIMO” PUMP SUBMERSIBLE PUMPS FOR DRAINING CLEAR WATER 37
DPC SUBMERSIBLE PUMPS FOR DRAINING CLEAR WATER 39
DRENOX SUBMERSIBLE PUMPS FOR DRAINING CLEAR WATER 41
DPV SUBMERSIBLE PUMP FOR DRAINING DIRTY WATER 44
OMNIA SUBMERSIBLE PUMP FOR DRAINING DIRTY WATER 46
BIOX XS SUBMERSIBLE EFFLUENT VORTEX PUMPS FOR DIRTY WATER 48
PRIOX SUBMERSIBLE EFFLUENT VORTEX PUMPS FOR DIRTY WATER 50
MINIVORT P SUBMERSIBLE EFFLUENT VORTEX PUMPS FOR DIRTY WATER 52
MINIVORT PP SUBMERSIBLE EFFLUENT VORTEX PUMPS FOR DIRTY WATER 54
VACUSYSTEM COLLECTION AND PUMPING STATIONS FOR DIRTY WATER 56
VERSAILLES SUBMERSIBLE PUMPS FOR FOUNTAINS AND WATER FEATURES 62
EXPANSION TANKS IN COMPOSITE MATERIAL 65
EXPANSION TANKS STAINLESS STEEL 66
EXPANSION TANKS PAINTED STEEL 67
FLUSSCONTROL - F. BASIC ELECTRONIC

PHASE PUMPS
CONTROL AND PROTECTION DEVICE FOR ELECTRIC SINGLE 68
SINGLE PHASE STARTER FOR THE CONTROL AND PROTECTION OF

QES PLUS SUBMERGED ELECTRIC PUMPS, DIRECT START
69
THREE PHASE ELECTRIC PANEL FOR THE PROTECTION AND CONTROL OF

AT SUBMERSIBLE OR SURFACE ELECTRIC PUMPS, DIRECT START
70
THREE PHASE STARTER FOR THE CONTROL OF SUBMERGED OR SURFACE

AD ELECTRIC PUMPS, DIRECT START
71
THREE PHASE STARTERS FOR THE CONTROL OF SUBMERGED OR SURFACE

AY ELECTRIC PUMPS
72
SINGLE PHASE STARTERS FOR THE CONTROL OF ONE OR TWO DRAINING

ADRM AND SEWAGE ELECTRIC PUMPS
73
THREE PHASE STARTERS FOR THE CONTROL OF ONE OR TWO DRAINING AND
ADRD SEWAGE ELECTRIC PUMPS
74
ADRY SEWAGE ELECTRIC PUMPS, STAR-TRIANGLE START
75
Accessories ACCESSORIES FOR CONTROL PANELS 76
4
CONTENTS IN ALPHABETIC ORDER

4” MOTORS NEMA SPEC WITH PART ELECTRICAL CABLE
25
6” MOTORS ELECTRIC MOTORS Ø 6” FOR SUBMERSIBLE PUMPS 32
Accessories ACCESSORIES FOR CONTROL PANELS 76

AD ELECTRIC PUMPS, DIRECT START
71
ADRD SEWAGE ELECTRIC PUMPS
74
SINGLE PHASE STARTERS FOR THE CONTROL OF ONE OR TWO DRAINING

ADRM AND SEWAGE ELECTRIC PUMPS
73
ADRY SEWAGE ELECTRIC PUMPS, STAR-TRIANGLE START
75

AT SUBMERSIBLE OR SURFACE ELECTRIC PUMPS, DIRECT START
70

AY ELECTRIC PUMPS
72
BIOX XS SUBMERSIBLE EFFLUENT VORTEX PUMPS FOR DIRTY WATER 48

DOMINATOR 4 MOTOR
8

DOMINATOR 5 FOR CLEAR WATER
10
DP SUBMERSIBLE PUMPS FOR DRAINING CLEAR WATER 35
DPC
CONTENTS IN ALPHABETIC ORDER

SUBMERSIBLE PUMPS FOR DRAINING CLEAR WATER 39
DPV SUBMERSIBLE PUMP FOR DRAINING DIRTY WATER 44
DRENOX SUBMERSIBLE PUMPS FOR DRAINING CLEAR WATER 41
EXPANSION TANKS IN COMPOSITE MATERIAL 65
EXPANSION TANKS PAINTED STEEL 66
EXPANSION TANKS STAINLESS STEEL 67
FLUSSCONTROL - F. BASIC ELECTRONIC

PHASE PUMPS
CONTROL AND PROTECTION DEVICE FOR ELECTRIC SINGLE 68
MINIVORT P SUBMERSIBLE EFFLUENT VORTEX PUMPS FOR DIRTY WATER 52
MINIVORT PP SUBMERSIBLE EFFLUENT VORTEX PUMPS FOR DIRTY WATER 54
OMNIA SUBMERSIBLE PUMP FOR DRAINING DIRTY WATER 46
PRATIKA SUBMERSIBLE PUMPS FOR CLEAR WATER
6
PRIOX SUBMERSIBLE EFFLUENT VORTEX PUMPS FOR DIRTY WATER 50
SINGLE PHASE STARTER FOR THE CONTROL AND PROTECTION OF

QES PLUS SUBMERGED ELECTRIC PUMPS, DIRECT START
69
SA 6” MULTISTAGE SUBMERSIBLE PUMPS COMPLETE WITH MOTOR 26
SA PUMP-ENDS 6” SUBMERSIBLE PUMPS 31

SCM 4 HF 400 MOTOR
21

SCM 4 Plus MOTOR
12
SCM 4 Plus / HF PUMP-

SUBMERSIBLE PUMPS 23
END
SIMER “SIMO” PUMP SUBMERSIBLE PUMPS FOR DRAINING CLEAR WATER 37
VACUSYSTEM COLLECTION AND PUMPING STATIONS FOR DIRTY WATER 56
VERSAILLES SUBMERSIBLE PUMPS FOR FOUNTAINS AND WATER FEATURES 62
5
PRATIKA
SUBMERSIBLE PUMPS FOR CLEAR WATER
The PRATIKA submersible pumps are portable and ready to use for installation in
traditional wells, water deposits, collection tanks, clear watercourses, lakes etc.
Equipped with Ø 32 hose adapter.
Automatic version equipped with float switch.
Applications
- Pumping of water from traditional wells
- Domestic tank installations for boosting
domestic drinking water systems
- Small-scale automatic systems for
garden irrigation
- Surface irrigation
Motor Usage limitations

- Dry motor
- Level of protection IP 68 - Type of liquid: clean water with no
- Class F insulation suspended solids or abrasive material
- Single phase supply with capacitor - Maximum liquid temperature 40° C
permanently activated - Maximum submersion under the water
- Thermal protection built into the motor level 10 m
winding
- Completely insulated cable connection
chamber
- Self-lubricating ball bearings
- Speed of rotation 2850 rpm
- Suitable for continuous use
DESIGN FEATURES
Component
1 Pump body X 5 CrNi 1810 (AISI 304) Stainless steel
2 Suction grid X 5 CrNi 1810 (AISI 304) Stainless steel
3 Suction base X 5 CrNi 1810 (AISI 304) Stainless steel
4 Power cable 15 m H07 RN-F With schuko plug
5 Shaft (hydraulic end)
X 5 CrNi 1810 (AISI 304) Stainless steel
with ceramic facing at the points of seal wear
6 Mechanical seal Graphite
7 Counterface Ceramic Oil chamber for
seal lubrication
8 Lip seal NBR 70 Rubber
9 Impeller Technopolymer
10 Diffuser Technopolymer
6
PRATIKA
TABLE OF HYDRAULIC PERFORMANCE
PUMP PERFORMANCE
Nominal Absorbed
L/1’ 0 20 40 60 80 100
Power Power N°
CODE MODEL VOLTAGE Amp µF. Q
Stadi
HP KW HP HW m3/h 0 1,2 2,4 3,6 4,8 6
N3051010-B PRATIKA Discharge

1,1 0,8 1,6 1,2 1 ~ 230 V 5 16 4 head 46 39 31 23 12 3
N3051000-B PRATIKA - AUT in meters
TABLE OF SIZES AND WEIGHTS

PRATIKA
Dimensions mm. Weight

Model
Minimum drainage Start level Stop level Free bore
level
A B ØC D E* F* G* DNM kg
PRATIKA 406 162 178 182 50/60 490 260 Ø 1,5 1” 1/4 9
* Start and stop level refers to the version equipped with floating switch
The minimum drainage level refers to the manual version
7
DOMINATOR 4
4” MULTISTAGE CENTRIFUGAL SUBMERSIBLE PUMPS
COMPLETE WITH MOTOR
The DOMINATOR 4” submersible pumps are suitable for istallation in traditional

wells, water deposits, collection tanks, clear watercourses, lakes etc.
Supplied with 20m nylon suspension cord.
• HYDRAULIC SYSTEM RESISTANT TO THE SAND

CORROSIVE ACTION.
• INTEGRATED NO-RETURN VALVE
• BUILT-IN CAPACITOR
Motor Applications
– Dry motor with stainless steel casing – Pumping of water from traditional wells.
cooled by the pumped liquid. – Domestic tank installations for boosting
– Level of protection IP 68. domestic drinking water systems.
– Class F insulation. – Small-scale automatic systems for
– Single phase supply with capacitor garden irrigation.
permanently activated. – Surface irrigation.
– Thermal protection built into the motor
winding.
– Completely insulated cable connection
chamber.
– Self-lubricating ball bearings.
– Speed of rotation 2850 rpm.
– Suitable for continuous use. Usage limitations
– Type of liquid: clean water with no
suspended solids or abrasive material.
– Maximum liquid temperature 40°C.
– Maximum submersion under the water
level 20 m.
10
12
11
DESIGN FEATURES
Component Material
3 Base Noryl
4 Impeller Acetal resin
5 Diffuser Polycarbonate with ceramic insert in the point of wear
9 Polycarbonate with stainless steel inserts in the point of
6 Diffuser cap
8
1
wear
Hexagonal, in X 10 CrNiS 1809 (AISI 303) stainless steel with
7 7 Motor shaft ceramic insert at the point of wear.
6
AISI 416 for the out of water parts.
5
4 9 Counterface Aluminum oxide
10 Power cable 20 m H07 RN-F
2
11 No-return valve 11 No-return valve Integrated - Plastic
12 Discharge head Noryl with 1 1/4 threaded insert
3
- Thrust bearing ring inserted in every stage
8
DOMINATOR 4
PUMP PERFORMANCE
Nominal Motor L/1’
power power 0 20 40 60 80
N°
CODE MODEL VOLTAGE Amp µF. Stages Q
HP Kw HP Kw m3/h 0 1,2 2,4 3,6 4,8
N3200020 DOMINATOR 4” - 55/50 M 0,70 0,50 0,90 0,65 1 ~ 220 ÷ 240 V 3 16 6 50 38,7 17
Discharge head
N3200110 DOMINATOR 4” - 75/35 M 0,50 0,35 0,80 0,60 1 ~ 220 ÷ 240 V 3 12,5 5 35 33 26 11
in meters
N3200010 DOMINATOR 4” - 75/56 M 0,80 0,60 1 0,75 1 ~ 220 ÷ 240 V 3,3 16 8 56 49,8 38,1 19
N3200100 DOMINATOR 4” - 115/36 M 0,55 0,40 1 0,75 1 ~ 220 ÷ 240 V 3,5 12,5 5 36 35 32 25 13
N3200040 DOMINATOR 4” - 115/57 M 1 0,80 1,50 1 1 ~ 220 ÷ 240 V 5 16 8 57 52 44,4 31,5 16,6
DNM
DOMINATOR 4

A

Model
A ØC Free Bore DNM kg
DOMINATOR 4” - 55/50 549 98 2 mm 1”1/4 8,8

DOMINATOR 4” - 75/35 560 98 2 mm 1”1/4 8,1
DOMINATOR 4” - 75/56 643 98 2 mm 1”1/4 9,6
DOMINATOR 4” - 115/36 560 98 2 mm 1”1/4 8,1
DOMINATOR 4” - 115/57 643 98 2 mm 1”1/4 9,9 øC
9
DOMINATOR 5
FOR CLEAR WATER
The DOMINATOR 5" submersible pumps are suitable for installation in traditional wells,
water deposits, collection tanks, clear watercourses, lakes etc.
• COMPLETELY IN STAINLESS STEEL

• DOUBLE MECHANICAL SEAL WITH OIL CHAMBER
• HIGH QUALITY AND RELEABILITY
Applications Usage limitations

- Pumping of water from traditional wells - Type of liquid: clean water with no
- Domestic tank installations for boosting suspended solids or abrasive material
domestic drinking water systems - Maximum liquid temperature 40° C
- Small-scale automatic systems for - Maximum submersion under the water
garden irrigation level 20 m
Motor
- Dry motor with stainless steel casing
cooled by the pumped liquid
- Level of protection IP 68
- Class F insulation
- Single phase supply with capacitor
permanently activated
- Thermal protection built into the motor
winding
chamber
DESIGN FEATURES
9
Component Material
8 1 Pump casing X 5 CrNi 1810 (AISI 304) Stainless steel
6 2 Suction grid X 5 CrNi 1810 (AISI 304) Stainless steel
5 3 Impeller X 5 CrNi 1810 (AISI 304) Stainless steel
4 4 Diffuser X 5 CrNi 1810 (AISI 304) Stainless steel
3 5 Spacer X 5 CrNi 1810 (AISI 304) Stainless steel
6 Shaft X 5 CrNi 1810 (AISI 304) Stainless steel
7 Power cable 20 m H07 RN-F with plug
2 8 Mechanical seal pump side Carbon graphite resin impreg. Al-Oxide counterface with NBR rubber
9 Mechanical seal motor side Carbon graphite resin impreg. Al-Oxide counterface with NBR rubber
10
DOMINATOR 5
PUMP PERFORMANCE
L/1' 0 20 40 60 80 100 120 140
In Stadi Q
COD. MOD. P2 (out) P1 (in) Volt µF
A Stages 3
HP kW HP kW V m /h 0 1,2 2,4 3,6 4,8 6 7,2 8,4
N3191230 DOMINATOR 5" 70/50B M 1 ~ 230 4 16
N3191240 DOMINATOR 5" 70/50B M AUT
N3191250 DOMINATOR 5" 70/50B T 0.6 0.8 1.2 0.9 3 ~ 400 1.8 6 50.6 42.5 29.3 7.5
N3191260 DOMINATOR 5" 70/50B T 3 ~ 230 3
N3191220 DOMINATOR 5" 70/75B M 1 ~ 230 6 20
m.c.a. / m.c.w.
N3191280 DOMINATOR 5" 70/75B T 1.2 0.9 2 1.45 3 ~ 400 2.1 9 75 60.7 41.4 17.2
N3191290 DOMINATOR 5" 70/75B T 3 ~ 230 3.7
N3191210 DOMINATOR 5" 140/45B M 1 ~ 230 5.5 16
N3191310 DOMINATOR 5" 140/45B T 1.1 0.8 1.8 1.3 3 ~ 400 2 5 44 42 38.4 33.3 28 21.8 15.2 7.4
N3191320 DOMINATOR 5" 140/45B T 3 ~ 230 3.5
N3191200 DOMINATOR 5" 140/65B M 1 ~ 230 7.2 20
N3191340 DOMINATOR 5" 140/65B T 1.5 1.1 2.3 1.7 3 ~ 400 2.5 7 62 57 51 45 38 27.9 18.2 9
N3191350 DOMINATOR 5" 140/65B T 3 ~ 230 4.4
DOMINATOR 5
Model Dimensions mm. Weight
A ØC Free Bore DNM kg

DOMINATOR 5” - 70/50 470 132 2 mm 1”1/4 13.7
DOMINATOR 5” - 70/75 520 132 2 mm 1”1/4 15.5
DOMINATOR 5” - 140/45 495 132 2 mm 1”1/4 14.2
DOMINATOR 5” - 140/65 550 132 2 mm 1”1/4 15.8
11
SCM 4 Plus
4” MULTISTAGE CENTRIFUGAL SUBMERSIBLE PUMPS
COMPLETE WITH MOTOR
The SCM 4 PLUS submersible pumps consist of a multistage pumping unit directly
connected to a submersible motor.
Especially suitable for pumping from deep 4’’ (100mm) Ø wells.
• HIGH STIFFNESS AND HIGH RESISTANCE TO

WATER HAMMERING
• HIGH SAND ABRASION RESISTANCE
• HIGH HYDRAULIC EFFICIENCY
Motor Applications
- 4” submersible motor - Pumping of water from drilled wells
- Special resin impregnated sealed - Automatic systems for garden
stator irrigation
- Water-cooled thrust bearings and - Surface irrigation for agricultural use
bushes - Drinking water systems
- Approx. 1.5 m extendible power - Pumping and supply of stored
supply cable deposits or of booster autoclaves
- Non-polluting water cooling for civil and industrial systems
- 4” NEMA flange - Heat pumps
- Level of protection IP 68
- Class B insulation
- Special mechanical seal with sand
guard
- Pressure compensation diaphragm
- Supplied without capacitor (single
phase version)
- Electrical control panel on request Usage limitations
- Type of liquid: clean non-aggressive,
non-explosive, free of solids
- Maximum liquid temperature 30° C
- Max. start-ups per hour 20
- Motor protection with thermal relay
provided by the user
1
DESIGN FEATURES
4 Component Material
11
1 Outlet X 5 CrNi 1810 (AISI 304) Microcast stainless steel
2 Suction flange X 5 CrNi 1810 (AISI 304) microcast stainless steel
3 Pump casing X 5 CrNi 1810 (AISI 304) Stainless steel
9
4 Check valve X 5 CrNi 1810 (AISI 304) Stainless steel
10
5 Cable protection trough X 5 CrNi 1810 (AISI 304) Stainless steel
8
6 Filter X 5 CrNi 1810 (AISI 304) Stainless steel
7 Impeller Acetal resin
5 3
8 Diffuser Polycarbonate with ceramic insert at the point of wear
9 Cap diffuser Polycarbonate with steel insert series 300
2 10 Motor shaft
Hexagonal in X10 CrNiS 1809 (AISI 303)
Stainless steel with ceramic facing on the upper end
Self-lubricating
6 11 Molybdenum bisulphide polyamide
delivery bearing
- Thrust ring inserted in every stage
12
SCM 4 Plus
Delivery connection Shaft guide bearing Floating impeller with Motor bracket and
point in microcast AISI made with a self- suction point shim on suction point in
304 stainless steel with lubricating closed stainless steel moulded microcast AISI 304
an internal tapered bush in molybdenum with a diffusor cover. stainless steel rigidly
double profile with a bisulphide polyamide Thrust bearing inserted welded to the outer
stainless steel non and stainless steel between the hub of the stainless steel liner.
return valve and a shaft with ceramic impeller and diffusor Stainless steel suction
double slot for safety insert at the point of formed by one ceramic grid.
cable. wear. ring moulded with the
diffusor and a free ring BENEFITS:
BENEFITS: BENEFITS: in graphite. This system offers
It resets flow resistance Increases the life of “International Patent” high resistance to
offering maximum the pump - protection mechanical stresses
rigidity and high against dry operation BENEFITS: caused by operating
resistance to protec the -high resistance to This extraordinary pressure.
pump against water wear caused by sand. technological Maximum rigidity of
hammering. innovation leads to a the whole structure
large increase eliminates vibrations.
in efficiency as well as
high resistance to
abrasion by sand and
to dry operation.
SCM 4 Plus
13
SCM 4 Plus
TABLE FOR CALCULATING PUMP LENGTH
A B C
L Total
Total Motor Pump
MODEL DNM Packing weight
length length length
length Kg.
mm. mm. mm.
96
SCM 4 PLUS 40/57 M 576 242 334 730 11.8
SCM 4 PLUS 40/57 T 557 223 334 710 10.8 DNM
SCM 4 PLUS 40/90 M 717 271 446 870 14.0

SCM 4 PLUS 40/90 T 688 242 446 840 12.7
SCM 4 PLUS 40/120 M 857 299 558 1010 16.1
SCM 4 PLUS 40/120 T 829 271 558 980 14.9
SCM 4 PLUS 40/185 M 1109 327 782 1260 19.2
SCM 4 PLUS 40/185 T 1081 299 782 1230 17.9
SCM 4 PLUS 40/240 M 1339 356 983 1490 22.2
SCM 4 PLUS 40/240 T 1310 327 983 1460 20.8
C
SCM 4 PLUS 55/50 M 509 242 267 660 11.3
SCM 4 PLUS 55/50 T 490 223 267 640 10.3
A
SCM 4 PLUS 55/80 M 628 271 357 780 13.1
SCM 4 PLUS 55/80 T 599 242 357 750 11.8
SCM 4 PLUS 55/105 M 700 299 401 850 14.9
SCM 4 PLUS 55/105 T 672 271 401 830 13.7
SCM 4 PLUS 55/160 M 862 327 535 1012 17.3
SCM 4 PLUS 55/160 T 834 299 535 990 16.0
SCM 4 PLUS 55/200 M 1026 356 670 1180 19.8
B
SCM 4 PLUS 55/200 T 997 327 670 1150 18.4
SCM 4 PLUS 55/300 T 1317 356 961 1470 22.3
1”
SCM 4 PLUS 75/40 M 545 242 303 1/4 700 11.2 105
SCM 4 PLUS 75/40 T 526 223 303 680 10.2
SCM 4 PLUS 75/56 M 631 271 360 780 12.9
SCM 4 PLUS 75/56 T 602 242 360 750 11.6
SCM 4 PLUS 75/75 M 744 299 445 900 14.8
SCM 4 PLUS 75/75 T 716 271 445 870 13.6
L
SCM 4 PLUS 75/110 M 915 327 588 1070 17.1
SCM 4 PLUS 75/110 T 887 299 588 1040 15.8
SCM 4 PLUS 75/140 M 1058 356 702 1200 19.4
SCM 4 PLUS 75/140 T 1029 327 702 1180 18.0
SCM 4 PLUS 75/210 T 1372 356 1016 1520 21.5
SCM 4 PLUS 115/30 M 488 242 246 640 11.0

SCM 4 PLUS 115/30 T 469 223 246 620 10.0
SCM 4 PLUS 115/50 M 602 271 331 750 12.8
SCM 4 PLUS 115/50 T 573 242 331 720 11.5
SCM 4 PLUS 115/65 M 687 299 388 840 14.4
SCM 4 PLUS 115/65 T 659 271 388 810 13.2
SCM 4 PLUS 115/95 M 829 327 502 980 16.6
SCM 4 PLUS 115/95 T 801 299 502 950 15.3
SCM 4 PLUS 115/122 M 973 356 617 1120 18.8
SCM 4 PLUS 115/122 T 944 327 617 1100 17.4
SCM 4 PLUS 115/185 T 1202 356 846 1350 20.8
SCM 4 PLUS 115/245 T 1525 423 1102 1680 25.0
SCM 4 PLUS 150/42 M 652 299 353 800 14.0

SCM 4 PLUS 150/42 T 624 271 353 780 12.8
SCM 4 PLUS 150/64 M 790 327 463 940 16.1
SCM 4 PLUS 150/64 T 762 299 463 910 14.8
SCM 4 PLUS 150/84 M 929 356 573 1080 18.3
SCM 4 PLUS 150/84 T 900 327 573 1050 16.9
SCM 4 PLUS 150/120 T 1142 356 786 1300 20.1
SCM 4 PLUS 150/170 T 1466 423 1043 1620 24.2
SCM 4 PLUS 150/200 T 1816 590 1226 1970 33.1
SCM 4 PLUS 150/300 T 2407 704 1703 2” 2560 42.3
SCM 4 PLUS 250/53 M 951 356 595 1100 18.0

SCM 4 PLUS 250/53 T 922 327 595 1070 15.6
SCM 4 PLUS 250/78 T 1186 356 830 1340 18.0
SCM 4 PLUS 250/100 T 1550 514 1036 1700 23.9
SCM 4 PLUS 250/127 T 1833 590 1243 1983 29.6
SCM 4 PLUS 250/185 T 2462 704 1758 2612 42.6
14
SCM 4 Plus 40
The power curve refers to the brake horse power (BHP) per stage. % indicates the pump hydraulic efficiency
PUMP PERFORMANCE
Motor
N° power In L/1’ 10 20 30 40 Ø
CODE MODEL VOLTAGE F. Q
stages (A) DNM
HP Kw m /h3
0,6 1,2 1,8 2,4
N3181000 SCM 4 PLUS-40/57 M 1 ~ 230 V 3,3 16

9 0,5 0,37 49 41 26 3
N3181010 SCM 4 PLUS-40/57 T 3 ~ 400 V 1,1
SCM 4 Plus
N3181020 SCM 4 PLUS-40/90 M 1 ~ 230 V 4,3 20

14 0,75 0,55 76 64 40 4
Discharge head
N3181030 SCM 4 PLUS-40/90 T 3 ~ 400 V 1,5

in meters
N3181040 SCM 4 PLUS-40/120 M 1 ~ 230 V 5,7 30 1”1/4

19 1 0,75 104 86 55 7
N3181050 SCM 4 PLUS-40/120 T 3 ~ 400 V 2
N3181060 SCM 4 PLUS-40/185 M 1 ~ 230 V 8,4 40

29 1,5 1,1 158 130 85 10
N3181070 SCM 4 PLUS-40/185 T 3 ~ 400 V 2,8
N3181080 SCM 4 PLUS-40/240 M 1 ~ 230 V 10,7 50

38 2 1,5 205 160 110 12
N3181090 SCM 4 PLUS-40/240 T 3 ~ 400 V 3,9
15
SCM 4 Plus 55
PUMP PERFORMANCE
Motor L/1’ 10 20 30 40 50
N° power In Ø
CODE MODEL VOLTAGE µF. Q
Stages (A) DNM
HP Kw m /h3
0,6 1,2 1,8 2,4 3
N3182000 SCM 4 PLUS/55/50 M 1 ~ 230 V 3,3 16

6 0,5 0,37 47 42 36 23 8
N3182010 SCM 4 PLUS/55/50 T 3 ~ 400 V 1,5
N3182020 SCM 4 PLUS/55/80 M 1 ~ 230 V 4,3
10 0,75 0,55 20 75 66 55 35 12
N3182030 SCM 4 PLUS/55/80 T 3 ~ 400 V 1,6
Discharge head
1 ~ 230 V 5,7
in meters
N3182040 SCM 4 PLUS/55/105 M

12 1 0,75 30 98 87 72 46 12 1
N3182050 SCM 4 PLUS/55/105 T 3 ~ 400 V 2
“1/4
N3182060 SCM 4 PLUS/55/160 M 1 ~ 230 V 8,4
18 1,5 1,1 40 145 132 110 70 24
N3182070 SCM 4 PLUS/55/160 T 3 ~ 400 V 2,8
N3182080 SCM 4 PLUS/55/200 M 1 ~ 230 V 10,7
24 2 1,5 50 187 169 145 90 30
N3182090 SCM 4 PLUS/55/200 T 3 ~ 400 V 3,9
N3182100 SCM 4 PLUS/55/300 T 37 3 2,2 3 ~ 400 V 5,5 278 244 200 140 50
16
SCM 4 Plus 75
PUMP PERFORMANCE
Motor L/1’ 20 30 40 50 60
N° power In Ø
Stages (A) DNM
HP Kw m /h 3
1,2 1,8 2,4 3 3,6
N3183000 SCM 4 PLUS-75/40 M 1 - 230 V 3,3

6 0,5 0,37 16 36 33 28 23 15
N3183010 SCM 4 PLUS-75/40 T 3 - 400 V 1,1
N3183020 SCM 4 PLUS-75/56 M 1 - 230 V 4,3
SCM 4 Plus
8 0,75 0,55 20 50 45 40 32 21
N3183030 SCM 4 PLUS-75/56 T 3 - 400 V 1,6
Discharge head
N3183040 SCM 4 PLUS-75/75 M 1 - 230 V 5,7

in meters
N3183050 SCM 4 PLUS-75/75 T 11 1 0,75 3 - 400 V 2,1 30 67 62 55 45 30 1

N3186140 SCM 4 PLUS-75/75 T 3 - 230 V 3,7 “1/4
N3183060 SCM 4 PLUS-75/110 M 1 - 230 V 8,4

N3183070 SCM 4 PLUS-75/110 T 16 1,5 1,1 3 - 400 V 3,2 40 100 92 82 68 44
N3183080 SCM 4 PLUS-75/140 M 1 - 230 V 10,7
N3183090 SCM 4 PLUS-75/140 T 20 2 1,5 3 - 400 V 3,9 50 127 116 105 86 57
N3183100 SCM 4 PLUS-75/210 T 30 3 2,2 3 - 400 V 5,5 186 170 155 130 80
17
SCM 4 Plus 115
PUMP PERFORMANCE
Motor
power L/1’ 30 40 50 60 80 90 100
N° In Ø
Stages (A) DNM
HP Kw m /h 1,8
3
2,4 3 3,6 4,8 5,4 6
N3184000 SCM 4 PLUS-115/30 M 1 ~ 230 V 3,3 16
4 0,5 0,37 1,1 26 24 22 20 13 9 6,4
N3184010 SCM 4 PLUS-115/30 T 3 ~ 400 V
N3184020 SCM 4 PLUS-115/50 M 1 ~ 230 V 4,3 20
7 0,75 0,55 1,6 46 43 40 36 23 16 10
N3184030 SCM 4 PLUS-115/50 T 3 ~ 400 V
N3184040 SCM 4 PLUS-115/65 M 1 ~ 230 V 5,7 30
N3184050 SCM 4 PLUS-115/65 T 9 1 0,75 3 ~ 400 V 2,1 58 55 51 46 29 20 11
Discharge head
N3186150 SCM 4 PLUS-115/65 T 3 ~ 230 V 3,7

in meters
N3184060 SCM 4 PLUS-115/95 M 1 ~ 230 V 8,4 40

N3184070 SCM 4 PLUS-115/95 T 13 1,5 1,1 3 ~ 400 V 3,2 83 80 74 67 43 30 18 1”1/4
N3186160 SCM 4 PLUS-115/95 T 3 ~ 230 V 5,2
N3184080 SCM 4 PLUS-115/122 M 1 ~ 230 V 10,7 50
17 2 1,5 3,9 109 106 98 88 55 38 21
N3184090 SCM 4 PLUS-115/122 T 3 ~ 400 V
N3184100 SCM 4 PLUS-115/185 T 24 3 2,2 3 ~ 400 V 5,5 160 153 143 130 85 58 31
N3184110 SCM 4 PLUS-115/245 T 33 4 3 3 ~ 400 V 7,8 218 210 198 179 118 84 47
18
SCM 4 Plus 150
PUMP PERFORMANCE
Molor
power
L/1’ 40 50 60 80 100 120 140
N° In Ø
Stages (A) DNM
HP Kw m /h 2,4
3
3 3,6 4,8 6 7,2 8,4
N3185000 SCM 4 PLUS-150/42 M 1 ~ 230V 5,7

N3185010 SCM 4 PLUS-150/42 T 6 1 0,75 3 ~ 400 V 2 30 38 37 36 33 26 17 10
N3186170 SCM 4 PLUS-150/42 T 3 ~ 230 V 3,5
N3185020 SCM 4 PLUS-150/64 M 1 ~ 230 V 8,4
N3185030 SCM 4 PLUS-150/64 T 9 1,5 1,1 3 ~ 400 V 2,8 40 59 58 57 50 39 27 15
SCM 4 Plus
N3186180 SCM 4 PLUS-150/64 T 3 ~ 230 V 4,9

Discharge head
N3185040 SCM 4 PLUS-150/84 M 1 ~ 230 V 10,7

in meters
N3185050 SCM 4 PLUS-150/84 T 12 2 1,5 3 ~ 400 V 3,9 50 80 78 75 64 50 34 20 2”

N3186190 SCM 4 PLUS-1 50/84 T 3~ 230 V 6,7
N3185060 SCM 4 PLUS-150/120 T 17 3 2,2 3 ~ 400 V 5,9 116 113 108 96 77 53 26
N3185070 SCM 4 PLUS-150/170 T 24 4 3 3 ~ 400 V 7,5 160 157 152 134 106 69 30
N3185080 SCM 4 PLUS-150/200 T 29 5,5 4 3 ~ 400 V 9,9 191 188 179 152 112 71 32
N3185090 SCM 4 PLUS-150/300 T 42 7,5 5,5 3 ~ 400 V 12,6 292 290 285 252 210 155 82
19
SCM
SCM 4
4 Plus
Plus 250
250
PUMP PERFORMANCE
Motor
power L/1' 100 120 140 180 200 220 240 Ø
CODE MODEL N˚ VOLTAGE ln µF. Q
Stages HP Kw (A) 13,2 14,4 DNM
3
m /h 6 7,2 8,4 10,8 12
N3186000 SCM 4 PLUS-250/53 M 1 ~ 230 V 10,7 50
N3186010 SCM 4 PLUS-250/53 T 9 2 1,5 3 ~ 400 V 3,5 43 41 37 26 18 11 4
N3186200 SCM 4 PLUS-250/53 T 3 ~ 230 V 6,7
N3186020 SCM 4 PLUS-250/78 T 13 3 2,2 3 ~ 400 V 5,9 63 59 54 41 30 18 7

Discharge head
in meters
N3186030 SCM 4 PLUS-250/100 T 17 4 3 3 ~ 400 V 7,8 83 78 66 54 41 24 9 2"
N3186040 SCM 4 PLUS-250/127 T 21 5,5 4 3 ~ 400 V 9,9 106 100 90 68 49 31 14
N3186050 SCM 4 PLUS-250/185 T 31 7,5 5,5 3 ~ 400 V 12,6 152 141 127 81 57 36 18
20
SCM 4 HF 400
4” MULTISTAGE CENTRIFUGAL SUBMERSIBLE
PUMPS COMPLETE WITH MOTOR
SCM 4HF 400 high flow rate submersible pumps consist of a multistage hydraulic end
directly connected to a submersible motor. Especially suitable for pumping from deep
Ø 4” (100 mm) wells
• BUILT TO DELIVER LONG TERM, TROUBLE-FREE

SERVICE
• HIGH HYDRAULIC EFFICIENCY
• HIGH FLOW
Motor
– 4” submersible motor
– Special resin impregnated sealed stator
– Water-cooled thrust bearings and
bushes
– Approx. 1,5 m extendible power supply
cable
Applications
– Non-polluting water cooling – Pumping of water from drilled wells
– 4” NEMA flange – Automatic systems for garden irrigation
– Level of protection IP68 – Surface irrigation for agricultural use
– Class B insulation – Drinking water systems
– Speed of rotation 2850 rpm – Pumping and supply of stored deposits
– Special mechanical seal with sand or of booster autoclaves for civil and
guard industrial systems
– Pressure compensation diaphragm – Heat pumps
– Supplied without capacitor (single
phase version)
– Suitable for continuous use
– Electrical control panel on request
Usage limitations
- Type of liquid: clean, non aggressive,
non-explosive, free of solids
- Maximum liquid temperature 30° C
- Max. start-ups per hour 20
DESIGN FEATURES
7
Component Material
10
6
3
1 Discharge 300 series stainless steel - 2” BSP threads
2 Motor bracket Microcast stainless steel (300 series)
3 Shell 300 series stainless steel
4 4 Cable guard 300 series stainless steel
5 Screen 300 series stainless steel
6 Impeller Glass filled Polycarbonate
Diffuser Glass filled Noryl®
7
2 Thrust ring inserted in every stage
8 Motor shaft (hydraulic end) Hexagonal in stainless steel (300 series)
5
9 Top bearing Acetal
10 Washer / thrust Phenolic
21
143
SCM
SCM 4
4 HF
HF 400
400
4” MULTISTAGE CENTRIFUGAL SUBMERSIBLE PUMPS COMPLETE WITH MOTOR
PUMP PERFORMANCE
Motor L/1' 100 150 200 250 300 350
CODE MODEL Power VOLTAGE Amp. µF. N˚ Q
HP kW stages m3/h 6 9 12 15 15 21
N3186090 SCM4HF 400/30 M 1 ~ 230 V 10,7

2 1,5 50 7 27,4 25 22,2 19,5 15,5
N3186100 SCM4HF 400/30 T
Discharge head
3 ~ 400 V 3,9
in meters
N3186110 SCM4HF 400/50 T 3 2,2 3 ~ 400 V 5,5 11 43 39,2 35,5 31,1 25,1 19,2
N3186120 SCM4HF 400/80 T 5,5 4 3 ~ 400 V 10 18 71 65 57,7 50,3 42,2 32,6

N3186130 SCM4HF 400/100 T 7,5 5,5 3 ~ 400 V 12,6 23 96,3 88,8 80 69,6 57,7 43
��
��
�
�
DIMENSIONS AND WEIGHTS

Dimension mm. Weight
�
MODEL A B C DNM total motor pump

Total Motor Pump
length length length kg kg kg
SCM4HF 400/30 M 914 384 530 2” BSP 21,5 14,5 7 ��
SCM4HF 400/30 T 980 305 675 2” BSP 19 12 7

SCM4HF 400/50 T 1036 356 680 2” BSP 21,5 13,5 8
�
SCM4HF 400/80 T 2060 584 1476 2” BSP 33 24 9

SCM4HF 400/100 T 2536 698 1838 2” BSP 39,4 29,4 10
22
144
SCM 4 Plus / HF PUMP-END
4” SUBMERSIBLE PUMPS
CODE MODEL Ql/1' 10 20 30 40 NECESSARY

MOTOR
N1050010 SCM 4 PLUS 40/57 49 41 37 26 HP 0,5
Dhiscarge head in meters

N1050020 SCM 4 PLUS 40/90 76 64 40 4 HP 0,75
N1050030 SCM 4 PLUS 40/120 104 86 55 7 HP 1
N1050040 SCM 4 PLUS 40/185 158 130 85 10 HP 1,5
N1050050 SCM 4 PLUS 40/240 205 160 110 12 HP 2
CODE MODEL Ql/1' 10 20 30 40 50 NECESSARY

MOTOR
N1050060 SCM 4 PLUS 55/50 47 42 36 23 8 HP 0,5
N1050070 SCM 4 PLUS 55/80 75 66 55 35 12 HP 0,75

N1050080 SCM 4 PLUS 55/105 98 87 72 46 15 HP 1
N1050090 SCM 4 PLUS 55/160 145 132 110 70 24 HP 1,5

N1050100 SCM 4 PLUS 55/200 187 169 145 90 30 HP 2
N1050110 SCM 4 PLUS 55/300 278 244 200 140 50 HP 3
CODE MODEL Ql/1' 20 30 40 50 60 NECESSARY

MOTOR
N1050120 SCM 4 PLUS 75/40 36 33 28 23 15 HP 0,5
N1050130 SCM 4 PLUS 75/56 50 45 40 32 21 HP 0,75

Discharge head in meters
N1050140 SCM 4 PLUS 75/75 67 62 55 45 30 HP 1
N1050150 SCM 4 PLUS 75/110 100 92 82 68 44 HP 1,5
N1050160 SCM 4 PLUS 75/140 127 116 105 86 57 HP 2
N1050170 SCM 4 PLUS 75/210 186 170 155 130 80 HP 3
23
4” SUBMERSIBLE PUMPS
CODE MODEL Ql/1' 30 40 50 60 80 90 100 NECESSARY

MOTOR
N1050180 SCM 4 PLUS 115/30 26 24 22 20 13 9 6,4 HP 0,5
N1050190 SCM 4 PLUS 115/50 46 43 40 36 23 16 10 HP 0,75

N1050200 SCM 4 PLUS 115/65 58 55 51 46 29 20 11 HP 1
N1050210 SCM 4 PLUS 115/95 83 80 74 67 43 30 18 HP 1,5
N1050220 SCM 4 PLUS 115/122 109 106 98 88 55 38 21 HP 2
N1050230 SCM 4 PLUS 115/185 160 153 143 130 85 58 31 HP 3
N1050240 SCM 4 PLUS 115/245 218 210 198 179 118 84 47 HP 4

MOTOR
N1050250 SCM 4 PLUS 150/42 38 37 36 33 26 17 10 HP 1
N1050260 SCM 4 PLUS 150/64 59 58 57 50 39 27 15 HP 1,5

N1050270 SCM 4 PLUS 150/84 80 78 75 64 50 34 20 HP 2
N1050280 SCM 4 PLUS 150/120 116 113 118 96 77 53 26 HP 3
N1050290 SCM 4 PLUS 150/170 160 157 152 134 106 69 30 HP 4
N1050300 SCM 4 PLUS 150/200 191 188 179 152 112 71 32 HP 5,5
N1050310 SCM 4 PLUS 150/300 292 290 285 252 210 255 82 HP 7,5
MOTOR
N1050320 SCM 4 PLUS 250/53 43 41 37 26 18 11 4 HP 2

N1050330 SCM 4 PLUS 250/78 63 59 54 41 30 18 7 HP 3
N1050340 SCM 4 PLUS 250/100 83 78 66 54 41 24 9 HP 4
N1050350 SCM 4 PLUS 250/127 106 100 90 68 49 31 14 HP 5,5
N1050360 SCM 4 PLUS 250/185 152 141 127 81 57 36 18 HP 7,5
NECESSARY
CODE MODEL Ql/1' 100 150 200 250 300 350 MOTOR
N1057980 SCM 4HF 400/30 27,4 25 22,2 19,5 15,5 HP 2

N1057990 SCM 4HF 400/50 43 39,2 35,5 31,1 25,1 19,2 HP 3
N1058000 SCM 4HF 400/80 71 65 57,7 50,3 42,2 32,6 HP 5,5
N1058010 SCM 4HF 400/100 96,3 88,8 80 69,6 57,7 43 HP 7,5
24
MOTORS 4”
NEMA SPEC WITH PART ELECTRICAL CABLE
POWER VOLTAGE
CODE Hz
HP kW
222P0390-C 0,5 0,37 1 ~ 230V 50
222P0400-C 0,75 0,55 1 ~ 230V 50
222P0310-C 1 0,74 1 ~ 230V 50
222P0320-C 1,5 1,1 1 ~ 230V 50
222P0330-C 2 1,5 1 ~ 230V 50
222P0540-C 3 2,2 1 ~ 230V 50
CODE POWER VOLTAGE Hz

HP kW
221P0740-C 0,5 0,37 3 ~ 400V 50
221P0750-C 0,75 0,55 3 ~ 400V 50
221P0760-C 1 0,74 3 ~ 400V 50
221P0990-C 1 0,74 3 ~ 230V 50

221P0770-C 1,5 1,1 3 ~ 400V 50
221P0910-C 1,5 1,1 3 ~ 230V 50
221P0570-C 2 1,5 3 ~ 400V 50
221P0920-C 2 1,5 3 ~ 230V 50
WATER COOLED 221P0580-C 3 2,2 3 ~ 400V 50

221P0590-C 4 3 3 ~ 400V 50
221P0600-C 5,5 4 3 ~ 400V 50
221P0610-C 7,5 5,5 3 ~ 400V 50

POWER VOLTAGE
CODE Hz
HP kW
222P0010 0,5 0,37 1 ~ 230V 50
222P0020 0,75 0,55 1 ~ 230V 50
222P0030 1 0,74 1 ~ 230V 50
222P0040 1,5 1,1 1 ~ 230V 50
222P0050 2 1,5 1 ~ 230V 50
POWER VOLTAGE
CODE Hz
HP kW
221P0030 0,5 0,37 3 ~ 400V 50
221P0040 0,75 0,55 3 ~ 400V 50
221P0050 1 0,74 3 ~ 400V 50

MOTORS 4”
221P0060 1,5 1,1 3 ~ 400V 50
221P0070 2 1,5 3 ~ 400V 50
OIL COOLED 221P0080 3 2,2 3 ~ 400V 50
221P1010 4 3 3 ~ 400V 50
221P1000 5,5 4 3 ~ 400V 50
25
SA
6” MULTISTAGE SUBMERSIBLE PUMPS COMPLETE
WITH MOTOR
The SA submerged pumps consist of a multistage pumping unit directly connected to

a submersible motor. Especially suitable for pumping from deep 6’’ (150mm) Ø wells.
Flow rate up to 1100 l/min.
• INTEGRATED CHECK VALVE
Motor Applications
- 6” Franklin submersible motor - Civil and industrial supply systems
- Special resin impregnated sealed stator - Overhead or surface irrigation
- Water-cooled thrust bearings and - Boosting
bushes - Firefighting
- Approx. 1.5 m extendible power supply - Various civil and industrial applications
cable - Mains water supply systems
- Non-polluting water cooling - Heat pumps
- 6” NEMA flange
- Level of protection IP68. Class F
insulation
- Special mechanical seal with sand
guard Usage limitations
- Pressure compensation diaphragm
- Suitable for continuous use - Type of liquid: clean non-aggressive,
- Electrical control panel on request non-explosive, free of solids
- Direction of rotation anticlockwise - Maximum liquid temperature 30° C
(seen from the delivery end) - Max. start-ups per hour: 20
- Maximum quantity of sand present:
40 g/m3
DESIGN FEATURES
Component Material
1 Outlet EN GJS 400 (GS400) Nodular cast iron
2 Suction flange EN GJS 400 (GS400) Nodular cast iron
3 Outer liner Stainless steel
4 Cable protection filter and trough Stainless steel
5 Shaft Stainless steel
Technopolymer/Polycarbonate.
6 Impeller SA 615 - SA 625: radial impellers
SA 630 - SA 650: semiaxial impellers
7 Diffuser Noryl GNF 2V
8 Wear rings NBR 70 Rubber
9 Bush bearings Stainless steel
10 Diffuser Bronze/rubber
26
SA 615
��
��
��
�
Ø MOTOR
DNM = 3” gas
Pump Ø
Model casing Motor Electric pump
L1 L Weight
(mm) (mm) (mm) (kg)
SA 615/4 435 87 791 22
SA 615/5 478 87 901 27
SA 615/6 511 87 1056 30
SA 615/9 625 87 1329 41
SA 615/12 738 137 1384 58
SA 615/18 966 137 1677 67 The power curve refers to the brake horse power (BHP) per stage. % indicates the pump hydraulic efficiency
PUMP PERFORMANCE
Motor
Power L/1' 0 120 160 200 230 260 300
N.
CODE MODEL Stages VOLTAGE Amp. Q
HP kW m3/h 0 7,2 9,6 12 13,8 15,6 18
D8760KKK SA 615/4* 4 3 2,2 3 ~ 400 V 5,5 62 60 55 51 46 39 31
D8761KKK SA 615/5* 5 4 3 3 ~ 400 V 7,5 78 74 69 63 57 49 39

Discharge head
in meters
D8762KKK SA 615/6* 6 5,5 4,0 3 ~ 400 V 9,9 94 89 82 75 68 58 46
D8763KKK SA 615/9* 9 7,5 5,5 3 ~ 400 V 12,6 140 134 123 113 101 88 70
D8764KKK SA 615/12 12 10 7,5 3 ~ 400 V 16 187 179 166 152 136 118 92
SA
D8765KKK SA 615/18 18 15 11 3 ~ 400 V 23,3 281 268 250 231 210 180 138
* WITH 4’’ MOTOR
27
SA 625
SA 625
��
��
��
�
Ø MOTOR
DNM = 3” gas
Pump Ø
L1 L Weight
(mm) (mm) (mm) (kg)
SA 625/4 511 87 1056 30
SA 625/6 625 87 1329 41
SA 625/8 738 137 1384 57
SA 625/12 966 137 1677 66
SA 625/16 1193 137 1969 75
PUMP PERFORMANCE
Motor
power L/1' 0 200 300 350 400 500 600
N.
30
3
HP kW m /h 0 12 18 21 24 34
D8771KKK SA 625/4* 4 5,5 4,0 3 ~ 400 V 9,9 61 53 48 44 40 28 17
D8772KKK SA 625/6* 6 7,5 5,5 3 ~ 400 V 12,6 91 80 71 66 59 43 25

Discharge head
in meters
D8773KKK SA 625/8 8 10 7,5 3 ~ 400 V 16 122 106 95 87 79 58 34
D8774KKK SA 625/12 12 15 11 3 ~ 400 V 23,3 182 159 143 131 119 88 50
D8775KKK SA 625/16 16 20 15 3 ~ 400 V 31,3 243 212 190 177 159 118 67
D8776KKK SA 625/20 20 25 18,5 3 ~ 400 V 38,5 304 265 238 220 198 146 84
164
28
SA
SA 630
630
145
DNM
L1
L
Ø MOTOR
DNM = 3” gas
Pump Ø
L1 L Weight
(mm) (mm) (mm) (kg)
SA 630/4 522 87 1226 39
SA 630/5 582 137 1228 54
SA 630/8 762 137 1473 62
SA 630/10 882 137 1658 70
PUMP PERFORMANCE
Motor
power L/1' 0 300 400 500 600 700 800
N.
HP kW m3/h 0 18 24 30 36 42 48
D8782KKK SA 630/4* 4 7,5 5,5 3 ~ 400 V 12,6 63 57 53 47 40 30 19

Discharge head
D8783KKK SA 630/5 5 10 7,5 3 ~ 400 V 16 78 72 67 59 50 37 23

in meters
D8784KKK SA 630/8 8 15 11 3 ~ 400 V 23,3 126 114 106 94 80 62 37
D8785KKK SA 630/10 10 20 15 3 ~ 400 V 31,3 157 143 133 119 101 76 45

SA
D8786KKK SA 630/12 12 25 18,5 3 ~ 400 V 38,5 188 171 160 143 122 92 55
SA
165
29
SA 650
145
DNM
L1
L
Ø MOTOR
DNM = 3” gas
Pump Ø
L1 L Weight
(mm) (mm) (mm) (kg)
SA 650/4 522 137 1168 53
SA 650/6 642 137 1353 61
SA 650/9 822 137 1598 69
SA 650/10 882 137 1724 76
SA 650/12 1002 137 1909 84
PUMP PERFORMANCE
Motor
power L/1' 0 600 700 800 900 1000 1100
N.
60
3
HP kW m /h 0 36 42 48 54 66
D8792KKK SA 650/4 4 10 7,5 3 ~ 400 V 16 54 40 35 31 25 19 13

Discharge head
D8793KKK SA 650/6 6 15 11 3 ~ 400 V 23,3 81 59 53 46 37 29 20

in meters
D8794KKK SA 650/9 9 20 15 3 ~ 400 V 31,3 122 90 80 68 57 44 30
D8795KKK SA 650/10 10 25 18,5 3 ~ 400 V 38,5 135 101 90 77 63 49 33
D8796KKK SA 650/12 12 30 22 3 ~ 400 V 45,3 162 120 107 93 75 59 40
30
166
SA
SA PUMP-ENDS
PUMP-ENDS
6”6” SUBMERSIBLE
SUBMERSIBLE PUMPS PUMPS
MOTOR
N1051300 SA 615/4 * 62 60 55 51 46 39 31 HP 3

N1051310 SA 615/5 * 78 74 69 63 57 49 39 HP 4
N1051320 SA 615/6 * 94 89 82 75 68 58 46 HP 5,5
N1051330 SA 615/9 * 140 134 123 113 101 88 70 HP 7,5
N1051340 SA 615/12 187 179 166 152 136 118 92 HP 10
N1051350 SA 615/18 281 268 250 231 210 180 138 HP 15
MOTOR
N1051360 SA 625/4 * 61 53 48 44 40 28 17 HP 5,5
HP 7,5
N1051370 SA 625/6 * 91 80 71 66 59 43 25
N1051380 SA 625/8 122 106 95 87 79 58 31 HP 10
N1051390 SA 625/12 182 159 143 131 119 88 50 HP 15
N1051400 SA 625/16 243 212 190 177 159 118 67 HP 20
N1051410 SA 625/20 304 265 238 220 198 146 84 HP 25
MOTOR
N1051420 SA 630/4 * 63 57 53 47 40 30 19 HP 7,5

N1051430 SA 630/5 78 72 67 59 50 37 23 HP 10
N1051440 SA 630/8 126 114 106 94 80 62 37 HP 15
N1051450 SA 630/10 157 143 133 119 101 76 45 HP 20
N1051460 SA 630/12 188 171 160 143 122 92 55 HP 25

PUMP-ENDS
SA PUMP-ENDS
MOTOR
N1051470 SA 650/4 54 40 35 31 25 19 13 HP 10
N1051480 SA 650/6 81 59 53 46 37 29 20 HP 15
N1051490 SA 650/9 122 90 80 68 57 44 30 HP 20
N1051500 SA 650/10 135 101 90 77 63 49 33 HP 25
N1051510 SA 650/12 162 120 107 93 75 59 40 HP 30

SA
* FOR 4’’ MOTOR
167
31
6” MOTORS
ELECTRIC MOTORS Ø 6” FOR SUBMERSIBLE PUMPS
NEMA SPEC WITH PART ELECTRICAL CABLE
POTENZA Ln
CODE VOLTAGE Hz A
HP kW
2210P0930-C 5,5 4 3 ~ 400V 50 9,3
2210P0810-C 7,5 5,5 3 ~ 400V 50 12,5
2210P0820-C 10 7,5 3 ~ 400V 50 16
2210P0940-C 12,5 9,3 3 ~ 400V 50 20,7
2210P0830-C 15 11 3 ~ 400V 50 23,3
2210P0840-C 20 15 3 ~ 400V 50 31,3
2210P0880-C 25 18,5 3 ~ 400V 50 38,5
2210P0890-C 30 22 3 ~ 400V 50 45,3
2210P0080-C 40 30 3 ~ 400V 50 63,5
2210P0090-C 50 37 3 ~ 400V 50 73
WATER COOLED
2210P1100-C 60 45 3 ~ 400V 50 93,9
CABLES AND JUNCTIONS
2
ZA000420 CABLE 4 x 1 NEOPRENE HO7 RNF 4 WIRE CABLE 1 MM WIRES
ZA000430 CABLE 4 x 1,5 NEOPRENE HO7 RNF 4 WIRE CABLE 1,5 MM2 WIRES
ZA000440 CABLE 4 x 2,5 NEOPRENE HO7 RNF 4 WIRE CABLE 2,5 MM2 WIRES
ZA000450 CABLE 4 x 4 NEOPRENE HO7 RNF 4 WIRE CABLE 4 MM
2
WIRES
ZA000460 CABLE 4 x 6 NEOPRENE HO7 RNF 4 WIRE CABLE 6 MM2 WIRES
ZA003370 JOINT KIT 2,5 HEAT-SHRINK SPLICING KIT FOR CABLES UP TO 4 X 2,5
ZA003390 JOINT KIT 6 HEAT-SHRINK SPLICING KIT FOR CABLES UP TO 4 X 6
ZA003380 JOINT KIT 10 RESIN FILLED SPLICING KIT
ZA009410 JOINT 2,5 HEAT-SHRINK SPLICING JOINT FOR CABLES UP TO 1 - 2,5 mmq
ZA009430 JOINT 6 HEAT-SHRINK SPLICING JOINT FOR CABLES UP TO 4 - 6 mmq
ZA009450 JOINT 10 RESIN FILLED SPLICING JOINT FOR CABLES UP TO 4 X 10 mmq
32
168
6” MOTORS
SELECTION OF ELECTRIC CABLE FOR SUBMERSIBLE PUMPS
MAXIMUM ELECTRIC CABLE LENGTH

Voltage loss 3% - Maximum environmental temperature +30%
Direct starting
3 ~ 400 V - 50 Hz
1 four - pole cable
MOTOR 4 x …mm2
1.5 2.5 4 6 10
KW
Cables - L max in m.
0.37 777
0.55 523
0.75 384
1.1 262
1.5 192 320
2.2 131 218 349
3 96 160 256 385
4 72 120 192 289
5.5 52 88 140 210 351
7.5 64 103 154 258
9.2 52 84 126 210
11 70 106 176
13 60 90 149
15 130
18.5 105
22 89
1 ~ 220 ÷ 240 V - 50 Hz
1 four - pole cable
4 x …mm2
MOTOR
1.5 2.5 4 6 10
kW
3 ~ 230 V - 50 Hz
Cables - max L in m. 1 four - pole cable
4 x …mm2
0.37 114 191 305 MOTOR
6” MOTORS
1.5 2.5 4 6 10
kW
0.55 77 128 205 308
0.75 56 94 151 226 376

Cables - L max in m.
1.1 38 64 103 154 257 0.75 107 179 269 359
1.5 47 75 113 188 1.1 76 127 191 255 383
2.2 32 51 77 128 1.5 57 96 144 192 289
33
169
DP
SUBMERSIBLE PUMPS FOR DRAINING CLEAR WATER
The DP series submersible pumps for clear water have been designed for domestic
applications as drainage of seepage water, pumping of water from wells, water
deposits and collection tanks. Equipped with 25-32 Ø rubber holder. The float level
switch enables the pump to work automatically.
• COMPACT AND HANDY

• EASY TO CARRY IN CASE OF EMERGENCY
Applications
- Drainage of seepage water, pumping of
rain water from a grating or drain
- Draining of environments, tanks and
wells

- Single-phase asynchronous motor with - Type of liquid: clear water
capacitor permanently activated and - Maximum liquid temperature 40°C
thermal protection built into the motor - Maximum submersion under the water
winding level 7 m
- Level of protection IP68 - Minimum drainage level 10 mm
- Class F insulation - Free clearance of solids 6 mm
chamber
DESIGN FEATURES
Component Material
1 Pump body Technopolymer
3 Motor casing X 8 CrNi 18-10 (AISI 304) Stainless steel
4 Power cable 10m H05 RN-F with plug
X 12 CrS 13 (AISI 416) Stainless steel
5 Motor shaft with a ceramic facing at the points of seal wear
Fixed double NBR 70 rubber seal.
6 Seal Oil chamber for seal lubrication.
35
DP
PUMP PERFORMANCE
Absorbed
L/1’ 0 25 50 100 150
Power
CODE MODEL VOLTAGE Amp µF. Q
HP KW m3/h 0 1,5 3 6 9
N1041190 DP 130/6
Discharge
in meters
0,4 0,3 1 ~ 230 V 1,4 6,3 7 6 4,5 1,7

head
N1041170 DP130/6 AUT*

N1041180 DP 180/7 AUT* 0,5 0,37 1 ~ 230 V 1,6 10 7 6,2 5,2 3,2 1,1
*Automatic version equipped with float switch

Model
A B C D E kg
DP 130/6 AUT 236 10 330 150 256 3,9
DP 180/7 AUT 236 10 330 150 256 4,2
* Start and stop level refers to the version equipped with floating switch.
36
SIMER PUMPS
SUBMERSIBLE PUMPS FOR DRAINING CLEAR WATER
The SIMO submersible pumps for clear water have been designed for drainage of
seepage water, pumping of water from sump pits, water deposits and collection tanks.
SIMER SIMO
• EXCELLENT FOR INDUSTRIAL DRAINAGE
• MINIMUM DRAINAGE LEVEL 3 mm
• EQUIPPED WITH 13-19-25 Ø ADAPTABLE CONNECTOR

- Drainage of seepage water, pumping - Type of liquid: clear water
of rain water from grating or drain - Maximum liquid temperature 50° C
- Emptying of water deposits, collection - Maximum submersion under
tanks and wells. the water level 2 m
- Minimum drainage level 3 mm
- Minimum priming level 20 mm
Motor
- Single-phase asynchronous oil cooled
motor with capacitor permanently
activated and thermal protection built
into the motor winding
- Level of protection IPX8
Made in U.S.A. - Speed rotation 2850 rpm
SIMER P3010
• 12 VOLT BATTERY MOTOR
• CABLE WITH COPPER EYELETS FOR HOOKUP TO AUTO
OR MARINE BATTERY
• MINIMUM DRAINAGE LEVEL 3 mm

- Drainage of seepage water, pumping - Type of liquid: clear water
of rain water from grating or drain - Maximum liquid temperature 50°C
- Create streams and waterfalls - Minimum liquid temperature 1.7 °C
for gardens - Minimum drainage level 3 mm
- Residential application - 16 cm openings tting
- Marine application - 12 volt, 21 amp DC battery
powered motor
Motor
- Syncronous electric motor,
12 V DC 21 Amp.
- Level of protection IP X8
Made in U.S.A. DESIGN FEATURES

Material
Component
SIMER SIMO P3010 GEYSER
Pump body Die cast aluminium Technopolymer GE VALOX 357
CELCON Acetal
Impeller Die cast zinc
copolymer GB 254
Motor casing Die cast aluminium Alluminium ASTM 360
H07RN-F 10m cable PVC SJTOW 3m cable
Power cord
(rapid clutch) (rapid clutch)
X 12 CrS 13 (AISI416)
Motor shaft Stainless Steel
Stainless Steel
Meccanical seal Graphite / Ceramic Graphite / Ceramic
Gaskets / O-ring NBR NBR
37
SIMER PUMPS
0,6 1,2 1,8 2,4 3 3,6 4,2 4,8 5,4
PUMP PERFORMANCE
Absorbed
L/1’ 4 21 40 55 75
CODE MODEL Power VOLTAGE Q
HP HW m3/h 0,2 1,3 2,4 3,3 4,5
OD6601G-02 SIMER SIMO PUMP 0,55 0,4 1 ~ 230 V Discharge 6,1 4,6 3 1,5 0
head
P1041900 * SIMER P3010 0,35 0,25 12 V in meters 9,1 7,7 5,8 4,8 1,5
* Performances depend on battery level

Model
D H DNM
kg
SIMER SIMO PUMP 160 185 1” 1/4F 5,3
SIMER P3010 150 180 1” 1/4 M 3
38
DPC
SUBMERSIBLE PUMP FOR DRAINING CLEAR WATER
The DPC pump has been designed for domestic applications as drainage of seepage
water, pumping of water from sump pits, water deposits or collection tanks. Equipped
with rubber holder for 3/4 or 25-32 Ø hoses and check valve.
• COMPACT
• INTEGRATED FLOAT SWITCH
• MANUAL-AUTOMATIC SELECTOR
• MINIMUM DRAINAGE LEVEL 3mm
Applications
- Drainage of seepage water, pumping of
rain water from a grating or drain
wells

- Single-phase asynchronous motor with - Type of liquid: clear water
capacitor permanently activated and - Maximum liquid temperature 40°C
thermal protection built into the motor - Maximum submersion under the water
winding level 7 m
- Level of protection IP68 - Minimum drainage level 3 mm (man.),
- Class F insulation 30 mm (aut.)
- Completely insulated cable connection - Free clearance of solids 5 mm
chamber
- Speed of rotation 2850 rpm’
DESIGN FEATURES
Component Material
1 Pump body Technopolymer
2 Suction base Technopolymer
4 Power cable 10m H05 RN-F With schuko plug
6 Motor shaft X 8 CrNi 18-9 (AISI 304) Stainless steel
8 Counterface Ceramic Oil chamber for seal lubrication
9 Secondary seal NBR rubber
39
DPC
PUMP PERFORMANCE
Absorbed
power
L/1’ 0 50 100 120 160
Q
CODE MODEL VOLTAGE Amp. µF.
HP kW m3/h 0 3 6 7,2 9,6
Discharge
N1080110 DPC 200/10 0,87 0,65 1 ~ 230 V 2,9 8 head 10 8 6 4,6 2,2
in meters

Model A B C D E F DNM kg
DPC 200/10 273 148 200 170 97 63 1” 1/4 5,6
40
DRENOX
SUBMERSIBLE SUMP PUMPS FOR DRAINING
CLEAR WATER
The DRENOX series pumps are built entirely in AISI 304 stainless steel. Cooling of the
motor is via a heat exchange chamber that allows the machine to work for long periods
when not completely submerged.
Equipped with Ø 32 mm hose adapter.
Usage limitations
- Type of liquid: partially effluent and
dirty clear water, non-aggressive
liquids
- Maximum liquid temperature 40°C
- Maximum submersion under the
water level7m
for model 80/7,35 mm for the other
models (manual version)
- Free clearance of solids 3 mm for
models 80/7,
6 mm for the other models
Applications
- Drainage of seepage water, pumping
of rain water, from a grating or drain,
pumping of domestic waste
water, drainage of environments,
bathing and swimming pools, industrial
applications
- Fountains and water features
Motor
- Level of protection IP68
- Single phase power supply with
capacitor permanently activated and
thermal protection built into the motor
winding
- Three phase power supply with external
protection provided by the user
chamber
DESIGN FEATURES
Component Material
3 Impeller X 5 CrNi 1810 (AISI 304) Cast stainless steel
Stainless steel shaft with a ceramic
5 Motor shaft facing at the points of seal wear
Fixed double NBR 70 rubber seal with special sand
6 Seal guard V-ring. Oil chamber for seal lubrication.
41
DRENOX
PUMP PERFORMANCE
Nominal Absorbed L/1’ 10 40 60 80 120 160 240 300
power power
CODE MODEL VOLTAGE Amp. µF. Q
HP kW HP kW m3/h 0,6 2,4 3,6 4,8 7,2 9,6 14,4 18
N1031020 DRENOX 160/8

0,55 0,40 0,75 0,55 1 ~ 230 ÷240 V 2,4 8 7 5,8 5 4,1 2,2
N1031060 DRENOX 160/8 AUT
N1031030 DRENOX 250/10

Discharge
0,75 0,55 1,2 0,9 1 ~ 230 ÷240 V 4,5 10 9,4 8,5 7,6 7,2 5,1 4,0 1
in meters
N1031070 DRENOX 250/10 AUT

head
N1031040 DRENOX 350/12

1,1 0,8 1,6 1,2 1 ~ 230 ÷240 V 5,1 16 10,5 10 9,5 9 7,7 6,5 3,4 1
N1031080 DRENOX 350/12 AUT
N1031110 DRENOX 350/12 T 1,1 0,8 1,6 1,2 3 ~ 400 V 2 10,5 10 9,5 9 7,7 6,5 3,4 1
Automatic version equipped with float switch
42
DRENOX
DRENOX 80/7 DRENOX 160/8 - 250/10 - 350/12

Minimum
Model Start level Stop level Free bore
drainage level
DRENOX 80/7 231 61 177 182 3 250 100 03 1* 1/4 5,7

Model Minimum
Start level Stop level Free bore
drainage level
DRENOX
DRENOX 160/8 300 94 177 182 35 320 107 06 1” 1/4 6,5
DRENOX 250/10 338 94 177 182 35 351 111 06 1” 1/4 7
DRENOX 350/12 338 94 177 182 35 351 111 06 1” 1/4 8,5
43
DPV
SUBMERSIBLE PUMP FOR DRAINING DIRTY WATER
The DPV pump has been designed for domestic applications, to move waste
water with solids of a maximum dimension of 25 mm and for the emptying of
dirty water collection tanks. It is equipped with 10 32 rubber holder. Automatic
version equipped with float switch.
• COMPACT AND HANDY

• EASY TO CARRY IN CASE OF EMERGENCY
Applications
- Drainage of domestic dirty water
wells
Usage limitations
- Type of liquid: dirty water with solids
- Maximum submersion under the
water level 7 m
- Free clearance of solids 25 mm
Motor
- Single-phase asynchronous motor with
capacitor permanently activated
and thermal protection built into the
motor winding
chamber
DESIGN FEATURES
Component Material
1 Pump casing Technopolymer

4 Power cable 10m H05 RN-F with plug X 12 CrS 13 (AISI 416)
Stainless steel with a ceramic facing at the
5 Motor shaft points of seal wear
Fixed double NBR 70 rubber seal.
6 Seal Oil chamber for seal lubrication
44
DPV
PUMP PERFORMANCE
Absorbed L/1’ 0 20 60 80 100
power
HP kW m3/h 0 1,2 3,6 4,8 6
Discharge
N2101120 DPV 160/6
0,56 0,41 1 ~ 230 V 1,9 10 head 6,5 5,4 4,2 3,3 2,4
N2101110 DPV 160/6 AUT*
in meters
* Automatic version equipped with float switch
Model A B C D E kg
DPV
DPV 160/6 AUT 284 35 330 150 304 4,2
45
OMNIA
SUBMERSIBLE SUMP PUMPS FOR DIRTY WATER
The OMNIA series pumps are made entirely of AISI 304 stainless steel. Cooling of
the motor is via a heat exchange chamber that allows the machine to work for long
periods when not completely submerged. Equipped with Ø 32mm hose adapter.
Applications
- Pumping of domestic waste water,
draining of environments, bathing and
swimming pools, industrial applications
- Fountains and water features
Motor
Usage limitations - Class F insulation
- Type of liquid: waste water with solids capacitor permanently activated
- Maximum liquid temperature 40°C - Thermal protection built into the motor
- Maximum submersion under the winding
water level 7m - Completely insulated cable connection
- Minimum drainage level 35 mm chamber
(manual) - Self-Iubricating ball bearings
- Free clearance of solids 20 mm - Speed of rotation 2850 rpm
DESIGN FEATURES
Component Material
3 Impeller X 5 CrNi 1810 (AISI 304) Stainless steel
5 Motor shaft X 12 CrNiS 1809 (AISI 416) Stainless steel
Fixed double NBR 70 rubber lip seal.
6 Seal Oil chamber for seallubrication.
7 Outlet 1” 1/4 gas male threaded
46
OMNIA
PUMP PERFORMANCE
Nominal Absorbed
power power L/1’ 10 40 70 100 140 200
HP kW HP kW m3/h 0,6 2,4 4,2 6 8,4 12
N2081070 OMNIA 80/5 1 ~ 230 ÷

0,3 0,2 0,4 0,3 1,4 8 4,1 2,7 1
N2081 090 OMNIA 80/5 AUT T 240 V
Discharge
in meters
N2081020 OMNIA 160/7 1 ~ 230 ÷

head
0,5 0,37 0,7 0,5 2,5 8 7 5,5 4 2,8 1

N2081110 OMNIA 160/7 AUT 240 V
N2081030 OMNIA 200/8 1 ~ 230 ÷

0,7 0,5 1 0,75 3,2 8 7,8 6,3 5,4 4,1 2,7 0,5
N2081100 OMNIA 200/8 AUT 240 V
Model Minimum
drainage level
Start level Stop level Free bore
OMNIA 80/5 264 94 177 182 35 250 100 020 1” 1/4 6,1
OMNIA
OMNIA 160/7 300 94 177 182 35 320 107 020 1” 1/4 7
OMNIA 200/8 338 94 177 182 35 351 111 020 1” 1/4 8,5
* Start and stop level refer to the version equipped with float switch.
The minimum drainage level refers to manual working.
47
BIOX XS
SUBMERSIBLE EFFLUENT VORTEX PUMPS
FOR DIRTY WATER
The BIOX XS series pumps are made entirely of AISI 304 stainless steel.
They work completely submerged in the pumped liquid that cools the motor
externally.
Manufactured on the vortex operating principle with the impeller set back.
Automatic version equipped with ﬂoat switch.
• SILICUM CARBIDE/SILICUM CARBIDE MECHANICAL

SEAL
Motor Applications
- Dry motor - All applications of pumping and draining
- Level of protection IP 68 sewage with suspended solids
- Class F insulation - Pumping stations with one or more
- Single phase power supply pumps for civil and rural plants
230 V +- 10% 50 Hz - suitable for emptying of seepage water,
with capacitor permanently handling of waste water (sanitary water),
activated and thermal protection emptying of cesspit and draining of
built into the motor winding sewage systems
- Completely insulated cable
connection chamber
Usage limitation
- Type of liquid: waste water and sewage
with solids
- Maximum liquid temperature 40°C.
- Maximun submersion under the water
level 7m
- Free clearance of solids: 40 mm
DESIGN FEATURES
Components Material
4 Outlet Threaded
5 Power cable 10m HO7 RN-F with plug
7 Mechanical seal Silicum carbide Silicum carbide
8 Counterface Silicum carbide Oil chamber for
9 Secondary seal NBR rubber lip seal seal lubrication
10 V-ring sand guard NBR rubber
48
BIOX XS
PUMP PERFORMANCE
P2 (out) P1 (in) L/1’ 50 100 150 200 250 300 350
In
A
HP kW HP kW m3/h 3 6 9 9 12 15 18
0,8 0,6 1,2 0,9 1 ~ 230 4,1 12,5 8 6,6 5,1 3,4 1,6
Discharge
in meters
N2091190 BIOX 250/9 XS AUT

head
N2091200 BIOX 350/10 XS AUT 1,2 0,9 1,7 1,3 1 ~ 230 5,8 20 9,6 8,5 7,3 6 4,5 3 1,5
BIOX XS

Model
A B C ØD DNM H1 H2 kg
BIOX 250/9 XS AUT 389 196 96 168 1”1/2 GAS 250 370 9,8
BIOX 350/10 XS AUT 419 196 96 168 2” GAS 300 400 11,2
49
PRIOX
SUBMERSIBLE EFFLUENT VORTEX PUMPS FOR
DIRTY WATER
The PRIOX series pumps are made entirely of AISI 304 stainless steel. They work
completely submerged in the pumped liquid that cools the motor externally.
Manufactured on the vortex operating principle with the impeller set back.
Applications Motor
- All applications of pumping and - Dry motor
draining effluent, civil and industrial - Level of protection I P 68
sewage with suspended solids - Class F insulation
- Pumping stations with one or more - Single phase power supply with
pumps for civil and industrial plants capacitor permanently activated
and thermal protection built into
the motor winding
- Three phase power supply with
external protection under care
of the user (control panel on request)
chamber
Usage limitations
with solids
- Maximum liquid temperature 40°C.
- Maximun submersion under the water
level 7m
(manual version)
- Free clearance of solids: 40 mm
50mm (PRIOX 600/13 - PRIOX 800/18)
5
6
DESIGN FEATURES
Component Material
7
4 Outlet Threaded
11
10 5 Cover Cast stainless steel (Priox 800/18)
6 Power cable 10m HOl RN-F with plug
4
1 7 Motor shaft X 12 CrNiS 1809 (AISI 416) Stainless steel
3
8 Mechanical seal Silicum carbide
9 9 Counterface Silicum carbide Oil chamber for
8 10 Secondary seal NBR rubber lip seal seal lubrication
2
11 V-ring sand guard NBR rubber
50
PRIOX
20
18
16
14
12 80
0/1
8
10
60
8
0/1
46 3
0/1
42 3
6 0/1
1
30
4 0/9
25
0/
8
2
Hm
L / 1' 100 200 300 400 500 600 700
Q
m3/ h 6 12 18 24 30 36 42
PUMP PERFORMANCE
Nominal Absorbed L/1’ 50 100 150 200 250 300 400 500 550 600 650
power power
CODE MODEL Amp. µF. Q
HP kW HP kW m3/h 3 6 9 12 15 18 24 30 33 36 39
VOLTAGE
N2110100 PRIOX 250/8 M
0,75 0,55 1,1 0,8 1 ~ 230 V 3,6 14 6,5 5,2 3,4 2,0 0,2
N2110110 PRIOX 250/8 M AUT
N2110040 PRIOX 300/9 M
0,8 0,6 1,2 0,9 1 ~ 230 V 4,1 14 7,7 6,4 5 3,8 2,3 1
N2110050 PRIOX 300/9 M AUT
N2110090 PRIOX 300/9 T 0,8 0,6 1,2 0,9 3 ~ 400 V 1,55 7,7 6,4 5 3,8 2,3 1
Discharge head
N2110020 PRIOX 420/11 M

in meters
1,2 0,9 1,8 1,3 1 ~ 230 V 6 20

N2110030 PRIOX 420/11 M AUT 10 9 7,8 6,3 5 3,8 1
N2110080 PRIOX 420/11 T 1,2 0,9 1,8 1,3 3 ~ 400 V 2,3
N2110000 PRIOX 460/13 M
1,5 1,1 2,2 1,6 1 ~ 230 V 7,5 20
N2110010 PRIOX 460/13 M AUT 11,8 10,8 9,8 8,5 7 5,5 2
N2110070 PRIOX 460/13 T 1,4 1 2 1,45 3 ~ 400 V 2,7
N2110060 PRIOX 600/13 T 1,6 1,2 2,4 1,8 3 ~ 400 V 3 12,8 12,2 11,3 10,3 9,3 8 5,5 3 1,8
N2110130 PRIOX 800/18 T 3,2 2,4 4 3 3 ~ 400 V 5,5 17,3 16,5 15,6 14,7 13,7 12,7 10,5 8 6,7 5,4 4

Minimum Free
Model drainage bore
level Start Stop
A B ØC D E* DNM kg
level level
PRIOX 250/8 420 122,5 235 241 63 F* G* Ø 40 1"1/2 9,4
PRIOX 300/9 420 122,5 235 241 63 550 290 Ø 40 2" 9,6
PRIOX 420/11 450 122,5 235 241 63 550 290 Ø 40 2" 11,2
PRIOX
PRIOX 460/13 450 122,5 235 241 63 580 320 Ø 40 2" 11,7
PRIOX 600/13 450 122,5 235 241 63 580 320 Ø 50 2" 12,6
PRIOX 800/18 T 485,5 122,5 235 241 63 580 320 Ø 50 2" 20,2
* Start and stop level refer to the version equipped with float switch. The minimum drainage level refers to manual working.

TABLE OF SIZES AND WEIGHTS 51
Dimensions mm. Minimum Weight
Free
Model drainage
MINIVORT P
SUBMERSIBLE SEWAGE PUMPS WITH VORTEX IMPELLER
The MINIVORT P pumps are made entirely of cast iron and designed for continuous
use in fixed installations. Manufactured on the vortex operating principle with the
impeller set back.
Strong and resistant.
Applications Motor
- Pumping and draining effluent; - Dry motor
civil and industrial sewage with - Level of protection IP68
suspended solids - Class F insulation
- Draining of cesspits, cesspools, - Single phase power supply with
handling of effluent capacitor permanently activated
- Pumping stations with one or more and thermal protection built into
pumps for civil and industrial plants the motor winding
- Three phase power supply with
external protection provided
by the user
- Four pole 1450 rpm (P2) motor (P4).
Usage limitations
- Maximum submersion under the water
level 7m
- Minimum drainage level 45mm
(manual version)
- Free clearance of solids 52 mm
Design features
- Automatic single phase version with float switch and sealed electric panel including
capacitor, thermal protection and manual/automatic switch. 10 m H07 RN-F power
supply cable
- Three phase version, 10 m H07 RN-F power supply cable
- Flanged outlet connection, with square threaded counterflange - 2" female
DESIGN FEATURES
Component Material
Pump body EN GJL 200 (ex G20) Grey cast iron
Motor casing EN GJL 200 (ex G20) Grey cast iron
Base EN GJL 200 (ex G20) Grey cast iron
Impeller EN GJL 200 (ex G20) Grey cast iron
Motor shaft X 12 CrNiS 1809 (AISI 416) Stainless steel
Mechanical seal
Counterface Ceramic Oil chamber for seal lubrication
Lip seal NBR 70 rubber
52
MINIVORT P
14
12
10
P2
-2
8
P2
- 1,
6 5
P4 - 1 P2 -
1
4
Hm
L / 1' 100 200 300 400 500 600 700
Q
m3/ h 6 12 18 24 30 36 42
PUMP PERFORMANCE
Nominal Absorbed
power power L/1' 50 100 200 300 400 500
HP kW HP kW m3/h 3 6 12 18 24 30
N2041010 MINIVORT P2 - 1 M 1 ~ 220 ÷ 240 V 6,5 20
N2041020 MINIVORT P2 - 1 M AUT 1 0,75 2 1,5 1 ~ 220 ÷ 240 V 6,5 20 6 5,4 4,1 3 1
N2041030 MINIVORT P2 - 1 T 3 ~ 400 V 2,3
N2042010 MINIVORT P2 - 1,5 M 1 ~ 220 ÷ 240 V 7 25
Discharge head
N2042020 MINIVORT P2 - 1,5 M AUT 1,5 1,1 2,2 1,6 1 ~ 220 ÷ 240 V 7 25 8,3 7,5 6,1 4,6 2,8 1
in meters
N2042030 MINIVORT P2 - 1,5 T 3 ~ 400 V 2,7

N2043010 MINIVORT P2 - 2 M 1 ~ 220 ÷ 240 V 9,8 35
N2043020 MINIVORT P2 - 2 M AUT 2 1,5 3 2,2 1 ~ 220 ÷ 240 V 9,8 35 12,1 11,3 9,8 8 6 3,7
N2043030 MINIVORT P2 - 2 T 3 ~ 400 V 3,2
N2044010 MINIVORT P4 - 1 M 1 ~ 220 ÷ 240 V 5,5 25
N2044020 MINIVORT P4 - 1 M AUT 1 0,75 1,7 1,25 1 ~ 220 ÷ 240 V 5,5 25 5 4,6 3,3 2,2
N2044030 MINIVORT P4 - 1 T 3 ~ 400 V 2,3
MINIVORT P2 : 2 poles motor 2850 rpm
MINIVORT P4 : 4 poles motor 1450 rpm
MINIVORT P

B

DNM
Model
A B C D DNM kg
C
MINIVORT P2 - 1 45 440 85 235 2" 27

MINIVORT P2 - 1,5 45 440 85 235 2" 27
D
A
MINIVORT P2 - 2 45 440 85 235 2" 28
MINIVORT P4 - 1 45 440 85 235 2" 27
53
MINIVORT PP
SUBMERSIBLE SEWAGE PUMPS WITH VORTEX IMPELLER
The MINIVORT PP pumps are made entirely of cast iron and designed for continuous
use in fixed installations. Manufactured on the vortex operating principle with the
impeller set back.
Motor Applications
- Dry motor - Pumping and draining effluent; civil and
- Level of protection IP68 industrial sewage with suspended
- Class F insulation solids
- Single phase power supply with - Draining of cesspits, cesspools,
capacitor permanently activated handling of effluent
and thermal protection built into - Pumping stations with one or more
the motor winding pumps for civil and industrial plants
- Three phase power supply with - On request, connecting foot to make
external protection provided installations and maintenance easier
by the user
Usage limitations Design features

- Type of liquid: waste water and sewage - Automatic single phase version with
- Maximum liquid temperature 40°C float switch and sealed electric panel
- Maximum submersion under the water including capacitor, thermal protection
level 7m and manual/automatic switch.
- Minimum drainage level 72mm 10 m H07 RN-F power supply cable
(manual version) - Three phase version, 10 m H07 RN-F
- Free clearance of solids 58 mm power supply cable
- Single phase version with panel
complete with capacitor and 10 m
H07 RN-F power supply cable
- Flanged outlet connection, with square
Optional threaded counterflange - 2" female
Cast iron connecting foot

( cod. N2054010 )
DESIGN FEATURES
Component Material
1 Pump casing EN GJL 200 (ex G20) Grey cast iron
6 2 Motor casing EN GJL 200 (ex G20) Grey cast iron
7
8
3 Base EN GJL 200 (ex G20) Grey cast iron
2
4 Impeller EN GJL 200 (ex G20) Grey cast iron
4 5 Power cable 10 m H07 RN-F
1
3
8 Counterface Ceramic Oil chamber for seal lubrication
- Lip seal NBR 70 rubber
54
MINIVORT PP
12
10
PP
2-
8 2
6 PP
2-
1,5
PP
4 2-
1
Hm
L / 1' 100 200 300 400 500 600 700 800 900
Q
m3/ h 6 12 18 24 30 36 42 48 54
PUMP PERFORMANCE
Nominal Absorbed
power power L/1' 100 200 300 400 600 800
HP kW HP kW m3/h 6 12 18 24 36 48
N2051010 MINIVORT PP2 - 1 M 1 ~ 220 ÷ 240 V 6,2 20
N2051020 MINIVORT PP2 - 1 M AUT 1 0,75 2 1,5 1 ~ 220 ÷ 240 V 6,2 20 5 4 3 1,6
N2051030 MINIVORT PP2 - 1 T 3 ~ 400 V 2,3
N2052010 MINIVORT PP2 - 1,5 M 1 ~ 220 ÷ 240 V 8,2 25
N2052020 MINIVORT PP2 - 1,5 M AUT 1,6 1,2 2,5 1,8 1 ~ 220 ÷ 240 V 8,2 25 6,7 5,7 4,6 3,3 1
N2052030 MINIVORT PP2 - 1,5 T 3 ~ 400 V 3
N2053010 MINIVORT PP2 - 2 M 1 ~ 220 ÷ 240 V 9,8 35
N2053020 MINIVORT PP2 - 2 M AUT 2 1,5 3 2,2 1 ~ 220 ÷ 240 V 9,8 35 10 9,3 8,2 7 4,2 1
N2053030 MINIVORT PP2 - 2 T 3 ~ 400 V 3,5
MINIVORT PP
B
DNM

C
Model
A
A B C D DNM kg
MINIVORT PP2 - 1 72 475 115 325 2 1/2" 30 D
MINIVORT PP2 - 1,5 72 475 115 325 2 1/2" 31
MINIVORT PP2 - 2 72 475 115 325 2 1/2" 33
55
VACUSYSTEM
COLLECTION AND PUMPING STATIONS FOR
DIRTY WATER
The VACUSYSTEM 200 are pre-assembled ready-for-use automatic pumping stations.

Particularly suitable when the water from drains is collected at a lower level than the
main sewer.
The standard pumping station consists of PRIOX submersible pump.
Electric pump motor

- Dry motor
thermal protection built into the
motor winding
chamber
- Self lubricating ball bearings
Usage limitations
- Type of liquid: water with suspended
solids of a maximum dimension
of 40 mm
Design features
The standard pumping station consists of:
- Tank
in polyethylene with a capacity of 175 l.
The closing lid is supplied with O-ring.
It warrants liquid seal and possible gas locks.
- DN 110 inlet, 2” outlet and DN 50 vent connection
- PRIOX 300/9 AUT, PRIOX 460/13 M AUT submersible pump
PRIOX DESIGN FEATURES

Component Material
Pump casing X 5 CrNi 1810 (AISI 304) Stainless steel
Suction base X 5 CrNi 1810 (AISI 304) Stainless steel
Impeller X 5 CrNi 1810 (AISI 304) Cast stainless steel
Power cable 10 m H07 RN-F
Motor shaft X 12 CrNi 1809 (AISI 416) Stainless steel
Mechanical seal Silicon carbide
Oil chamber for
Counterface Silicon carbide seal lubrication
Secondary seal NBR rubber lip seal
V-ring sand protection NBR rubber
56
VACUSYSTEM
14
12
10
8
46
0/
13
6
30
4 0/9
Hm
L / 1' 100 200 300 400 500 600
Q 6 36
m3/ h 12 18 24 30
PUMP PERFORMANCE
Nominal Absorbed
power power L/1' 50 100 150 200 250 300 400
HP kW HP kW m3/h 3 6 9 12 15 18 24
N2141140 VS 200 - P 300 M 0,8 0,6 1,2 0,9 1 ~ 230 V 4,1 12,5 7,7 6,4 5 3,8 2,3 1
Discharge
in meters
head
N2141150 VS 200 - P 460 M 1,4 1 2,2 1,6 1 ~ 230 V 7,2 20 11,8 10,8 9,8 8,5 7 5,5 2
VACUSYSTEM
DIMENSIONS AND WEIGHTS

Model
A B C D E F G H I L M N O P Q R S kg
VS 200 - P 300 M 500 380 250 100 185 250 130 410 350 800 410 350 635 515 720 185 85 27
VS 200 - P 460 M 500 380 250 100 185 250 130 410 350 800 410 350 635 515 720 185 85 29,2
57
VACUSYSTEM
COLLECTION AND PUMPING STATIONS FOR
DIRTY WATER
The VACUSYSTEM 200S are pre-assembled ready-for-use automatic pumping stations.

Particularly suitable when the water from drains is collected at a lower level than the
main sewer.
The standard pumping station consists of PRIOX submersible pump.
• CONNECTING FOOT
Electric pump motor
- Dry motor
- Single-phase power supply with
thermal protection built into the motor
winding
chamber
- Self lubricating ball bearings
Usage limitations
- Type of liquid: water with suspended
solids of a maximum dimension
of 40 mm
Design features
- The standard pumping station consists of:
- Tank
in polyethylene with a capacity of 175 l.
The closing lid is supplied with O-ring.
It warrants liquid seal and possible gas locks.
- DN 110 inlet, 2” outlet and DN 50 vent connection
- Connecting foot
- Electric panel
for the control and protection of
three-phase electric pumps.
- Float switch
with 10 m of 2 x 1 H07 RN-F cable
(for three-phase pumps)
- PRIOX Submersible Pump
Models:
- Priox 300/9 M AUT, Priox 300/9 T
- Priox 460/13 M AUT, Priox 460/13 T
PRIOX DESIGN FEATURES

Component Material
Suction base X 5 CrNi 1810 (AISI 304) Stainless steel
Impeller X 5 CrNi 1810 (AISI 304) Cast stainless steel
Power cable 10 m H07 RN-F
Motor shaft X 12 CrNi 1809 (AISI 416) Stainless steel
Mechanical seal Silicon carbide
Counterface Silicon carbide Oil chamber for
seal lubrication
Secondary seal NBR rubber lip seal
V-ring sand protection NBR rubber
58
VACUSYSTEM
VACUSYSTEM
59
VACUSYSTEM
60
VACUSYSTEM
VACUSYSTEM
61
VERSAILLES
SUBMERSIBLE PUMPS FOR FOUNTAINS AND
WATER FEATURES
The VERSAILLES pumps have been designed for fountains, water features and waterfalls
in water gardens.
Applications
- For fountains, water features, waterfalls
in water gardens
Usage limitations
- Type of liquid: clear water, free of solids
- Maximum submersion under the water
level 7m
- Free clearance: 1,5mm.
For water features with a less
clearance insert the sponge filter
(optional) in the hydraulics
Motor
capacitor permanently activated
- Thermal protection built into the motor
winding
chamber
Accessories (optional)
- Vulcano: adjustable water feature
with three level jets
- Gaiser: adjustable water feature with
a single foamy jet
- Campana: adjustable bell-shaped
water feature
- Filters: sponge to be used for water
features with clearances
under 1.5 mm
SPARE FILTER
DESIGN FEATURES
Component Material
Suction grid X 5 CrNi 1810 (AISI 304) Stainless steel
Base X 5 CrNi 1810 (AISI 304) Stainless steel
Impeller X 5 CrNi 1810 (AISI 304) Die cast stainless steel
Power cable 10 m H07 RN-F With plug
Fixed double NBR 70 rubber seal
Seal with special sand guard V-ring
Motor shaft X 12 CrS 13 (AISI 416) With
ceramic facing at the points of wear
1” F reducer Plastic
62
VERSAILLES
12
10
8 350
/12
250
/10
6
16
0/8
4
Hm
L / 1' 50 100 150 200 250 300
Q
m3/ h 3 6 9 12 15 18
PUMP PERFORMANCE
Nominal Absorbed Diameter and height of water features
power power in cm
CODE MODEL VOLTAGE Amp. µF. Q l /1’
HP kW HP kW VULCANO GAISER CAMPANA
N2121010 VERSAILLES 160/8 0,5 0,37 0,6 0,45 1 ~ 220 ÷ 240 V 2,2 8 Ø 180 - H 360 Ø 20 - H 110 Ø 90 - H 45
Discharge
in meters
head
ZB401690 VULCANO
ZB401700 GAISER
ZB401710 CAMPANA
ZB401720 FILTER 1 FOR MOD. 80/7 - 160/8
ZB401730 FILTER 2 FOR MOD. 250/10 - 350/12
VERSAILLES

Model
A B C P.L. DNM kg
VERSAILLES 160/8 144 231 425 Ø 1,5 1” 1/4 7
VERSAILLES 250/10 285 372 620 Ø 1,5 1” 1/4 7,8
VERSAILLES 350/12 285 372 620 Ø 1,5 1” 1/4 9,3
63
VERSAILLES
VULCANO
GAISER
CAMPANA
64
WELLMATE TANKS
IN COMPOSITE MATERIAL
Wellmate tanks in composite material represent the best solution for pressurized water storage and pressureboosting
applications. Thanks to the high density polyethylene inner liner and to the fiberglass-wound and epoxy resin-sealed outer
shell, Wellmate tanks don't rust,require little maintenance and weigh half then an equivalent steel tank. All Wellmate vessels
are tested and certified by NSF International and produced according to the European Pressure Equipment Directive (PED)
97/23/EC.
TECHNICAL FEATURES
REAL WATER MAXIMUM
CODE VOLUME OPERATING CONNECTIONS
VOLUME
lt (DRAWDOWN SETTING)* PRESSURE (BAR)
WM0060 55 18,3 8,5 1” M NPT
WM0075 75 25 8,5 1” M NPT
WM0120 112 37,3 8,5 1” M NPT
WM0150 153 50,9 8,5 1” M NPT
WM0180 178 59,3 8,5 1”1/4 M NPT
WM0235 235 78,3 8,5 1”1/4 M NPT
WM0330 328 109,2 8,5 1”1/4 M NPT
WM0450 453 150,8 8,5 1”1/4 M NPT
WM0600 606 201,8 10 2” M BSP
WM-IN-750 757 252,1 10 2” M BSP
WM-IN-1000 1022 340,3 10 2” M BSP
CODE MODEL
WM-PB-001 PUMP BASEMENT
Note: Maximum external operating temperature 120°F (49°C). Maximum internal operating temperature 100°F (38°C). Minimum operating temperature 40°F (4°C).
* With minimum and maximum system pressure between 2,0 and 3,5 bar

WELLMATE TANKS
Dimension (cm)
weight*
CODE Kg
WM0060 Diameter* height* Outlet height to floor*
WM0060 41 66 4,4 6,6
WM0075 41 81 4,4 8,1
WM0120 41 112 4,4 11,2
WM0150 41 145 4,4 13,6
WM0180 53 105 5,7 19,5
WM0235 61 105 5,7 22,7
WM0330 61 140 5,7 33,0
WM0450 61 189 5,7 43,1
WM0600 76 174 15 76,2
WM-IN-750 76 206 15 89,0
WM-IN-1000 92 212 20 117,1
*Diameter, height and weight may vary slightly without notice.
254 65
EXPANSION
EXPANSION TANKS
TANKS
STAINLESS STEEL
NOCCHI expansion tanks are made of AISI 304 stainless steel and are available in several models that are able to meet all the
demand of civil and industrial plants.
No toxic replaceable bladder suitable for food use, particularly recommended for use in humid environments.
In compliance with EC standards.
UPRIGHT VERSION
Interchangeable bromobutyl diaphragm,
and capacities of 8-20-24 litres.
The latter version is also available without
diaphragm with an air feeder.
Preload: 1,5 bar
HORIZONTAL VERSION
24- litres diaphragm with assembly
bracket for the electric pump and a new
support foot, designed to ensure
maximum stability.
Preload: 1,5 bar
PERFORMANCE
Max. operating Capacity

CODE MODEL DESCRIPTION DIAPHRAGM Assembly preassure Lt
bracket ( bar )
ZA006450 VES INOX N 8 VERTICAL 8 LT STAINLESS STEEL EXPANSION TANK BROMOBUTYL - 8 8
ZA006470 VES INOX N 24 H HORIZONTAL 24 LT STAINLESS STEEL EXPANSION TANK BROMOBUTYL YES 8 24
ZA006610 VAA 24 24 LITRE STAINLESS STEEL TANK FOR AIR FEEDER - - 8 24
ZA007000 - AIR FEEDER WITH FLEXIBLE PIPE - - - -
ØB
ØB
A
A
ØB
C
D
EXPANSION TANKS
A
D D

Model
A ØB C D Kg
N8 280 226 - 1” 2,4
N 20 390 272 - 1” 3,3

N 24 430 272 - 1” 5,0
N 24 H 430 272 300 1” 4,2
VAA 24 430 272 443 1” 4,2
66 71
EXPANSION TANKS
PAINTED STEEL
Expansion tank for pressure assemblies, in painted steel, from 2 to 500 Lt.,
with interchangeable diaphragm.
Stainless steel painted carbon flange. CE certificate.
Preload: 1.5 bar for models from 2 to 24 Lt.
2.0 bar for models from 60 to 500 Lt.
In compliance with EC standards
ØB
ØB
A
A
ØB
C
D
A
D
PUMP PERFORMANCE
Max. operating Capacity
CODE MODEL DESCRIPTION DIAPHRAGM Assembly pressure Lt
bracket ( bar )
ZA003860 VES 2 2 LITER EXPANSION TANK Food - quality rubber - 6 2
ZA000140 VES 24 V VERTICAL 24 LITER EXPANSION TANK Food - quality rubber - 6 24
ZA003850 VES 24 H HORIZONTAL 24 LITER EXPANSION TANK Food - quality rubber YES 6 24
ZA009070-CE VEC 60 V VERTICAL 60 LITER EXPANSION TANK Butyl rubber YES 10 60


EXPANSION TANKS
Dimensions mm. Kg
Model
A ØB C D
VES 2 175 155 - 1” M 0,950
VES 24 V 415 295 - 1” M 4,1
VES 24 H 415 - 310 1” M 4,8
VEC 60 V 845 382 - 1” M 17,5
VEC 100 V 950 450 - 1” M 19
VEC 200 V 1225 550 - 1” 1/2 M 37

VEC 300 V 1405 630 - 1” 1/2 M 54
VEC 500 V 1550 780 - 1” 1/2 M 104
72 67
FLUSSCONTROL - F. BASIC
Technical details Flusscontrol Flusscontrol basic
FLUSSCONTROL WITH CABLE
ZB902310 FLUSSCONTROL BASIC
68 73
QES PLUS
SINGLE PHASE STARTER FOR THE CONTROL AND PROTECTION OF SUBMERGED
ELECTRIC PUMPS, DIRECT START
Main components
- IP55 plastic box
- Main switch with circuit breaker
and motor
- Protector with restart button
- Capacitor.
- Terminal board
- Cable gland
Technical features
- Protection level : IP55
- Power supply voltage : 230V/ 1F 50 Hz
- External dimensions : 115 - 185 - 65 mm
- Weight : Kg 0,6
Type of functioning
- Manual through general switch
- Automatic through external remote
control (manostat, float…)
Connection plan
Limits in use
- Environmental temperature : -5 / +40 °C
- Relative humidity : 50% at 40°C
(without forming of condense)
- Standards : EN 60335-1 - EN 60439-1
Optional accessories
- Float switch or pressure switch (see accessories table)
CONTROL PANELS
Supply Voltage Nominal

50Hz Power Field µF Suitable Pumps
CODE MODEL
V Kw Hp A
UZQ12710 QES PLUS 10/37 M 230 1F 0,37 0,5 4 16
UZQ12720 QES PLUS 10/55 M 230 1F 0,55 0,75 6 20
UZQ12930 QES PLUS 10/55 M 230 1F 0,55 0,75 6 25 SCM 4” PLUS
UZQ12730 QES PLUS 10/75 M 230 1F 0,75 1 7 30 SCM 4 HF
4” MOTORS
UZQ12940 QES PLUS 10/75 M 230 1F 0,75 1 7 35
UZQ12740 QES PLUS 10/110 M 230 1F 1,1 1,5 9 40
UZQ12750 QES PLUS 10/150 M 230 1F 1,5 2 12 50
69
AT
SUBMERSIBLE OR SURFACE ELECTRIC PUMPS, DIRECT START
Main components
- Plastic enclosure
- Dry running protection through float switch,
pressure switch or probes
- Power indicator lights
Technical features
- Power supply voltage : 3x400 V
- Frequency: 50/60 Hz
- Power: 0,37 to 7,5 kW.
- Direct motor start
- Motor protector
- External dimensions : 260 - 195 – 180 mm
- Weight : Kg 3,35
Connection plan
Type of functioning
- Manual through MAN selector
Automatic through external remote
control (manostat, float, …) and/or
level control (filling, emptying, dry
function protection)
Limits in use
- Control through an external
enable contact.
- Ambient temperature: -5 to +40 °C
(according to EN 60439-1).
- Maximum relative humidity: 50% at
+40°C, provided that no condensation
occurs (according to EN 60439-1).
- ECL electrodes for level control
- Float switch or pressure switch
(see accessories table)
P Application field Suitable pumps

min max
CODE MODEL Volt A Surface Submersible
kW kW min max
UZQ13000 Q.EL AT10 1-1,6A 400V 3x400 0,37 0,55 1 1,6 VLR-VLRI-VLRX DOMINATOR 5”
UZQ13010 Q.EL AT10 1-2,5A 400V 3x400 0,55 0,75 1,6 2,5 DHR-DHI-MCX SCM 4” PLUS
UZQ13020 Q.EL AT10 2,5-4A 400V 3x400 0,75 1,5 2,5 4 MULTINOX-MAX SCM 4 HF
UZQ13030 Q.EL AT10 4-6,3A 400V 3x400 1,5 2,2 4 6,3 MULTINOX-A
UZQ13040 Q.EL AT10 6,3-10A 400V 3x400 2,2 4 6,6 10 MULTINOX-VE 4” MOTORS
UZQ13050 Q.EL AT10 10-16A 400V 3x400 4 7,5 10 16 JET-CM-CB-EP NRM
7074
AD
ELECTRIC PUMPS, DIRECT START
Main components
- IP 54 painted metallic case.
- Main switch, door block
- Fuse block with fuses on the
main circuit
auxiliary circuit
- Ammeter with amperometric
transformer
- Voltmeter with voltmetric selector
- Level block light
- Function light
- Power led
- Thermal block light
- Terminal board
- Contactor 24 V
- Overload protection and phase
absence thermal relay
- Level control module
- Transformer for auxiliary circuit
- Cable gland
- MAN -or -AUT Selector
Technical features
- External dimensions : 320 - 400 - 180 mm
- Weight : Kg 14-50
Connection plan
Type of functioning
- Manual through Man. or Aut. Selector
control (manostat, float, …) and/or
level control (filling, emptying, dry
function protection)
Limits in use
- Environmental temp. : -5 / +40 °C
- Standards : EN 60730 - EN 60439
CONTROL PANELS
- UZA00100 ECL electrodes for level control
- CE040010 Panel wall mount fixing fins
Supply Voltage Nominal Field Suitable Pumps

CODE MODEL 50Hz Power
A
V Kw Hp min max Surface Submerged
UZQ02700 Q.E. AD10/550 400 3F 5,5 7,5 9 15
SCM4"PLUS
UZQ02900 Q.E. AD10/920 400 3F 9,2 12 14 23 VLR - VLRI SCM4 HF
31 VLRX - NRM 4"/6" MOTORS
UZQ03000 Q.E. AD10/1100 400 3F 11 15 20
SA
UZQ03100 Q.E. AD10/1500 400 3F 15 20 28 38
71
AY
AY/AR
ELECTRIC PUMPS
Main components AY SERIES

- IP 54 painted metallic case - Fuse block with fuses
- Main switch, door block on the main circuit
- Fuse block with fuses on the - Timer for S/T exchange
auxiliary circuit - Line – star-triangle contactors
- Ammeter with amperometric - Star/triangle start level control
transformer - External dimensions :
- Voltmeter with voltmetric selector 400 - 600 - 220 mm
- Level block light - Weight : Kg 25-95
- Function light
- Power led
- Terminal board
- Overload protection and phase
absence thermal relay
- Level control module
- Cable gland
- MAN -or -AUT Selector
Technical features
Type of functioning AR
- Manual through Man. or Aut. Selector,

control (manostat, float, …)
and/or level control (filling, emptying,
dry function protection)
Limits in use Connection plan

- Environmental temp. : -5 / +40 °C AY
- Standards : EN 60730 - EN 60439
- UZA00100 - ECL electrodes for level control
- CE040020 - Panel wall mount fixing fins
Supply Voltage Nominal Field Suitable Pumps

CODE MODEL 50Hz Power
A
V Kw Hp min max Surface
UZQ03800 Q.E. AY10/400 400 3F 4 5,5 8 12
UZQ03900 Q.E. AY10/550 400 3F 5,5 7,5 11 16
UZQ04000 Q.E. AY10/920 400 3F 9,2-11 12-15 16 25
UZQ04200 Q.E. AY10/1500 400 3F 15 20 25 35 VLR - VLRI
UZQ04300 Q.E. AY10/1850 400 3F 18,5 25 34 44 VLRX - NRM
UZQ04400 Q.E. AY10/2200 400 3F 22 30 40 52
UZQ04500 Q.E. AY10/3000 400 3F 30-33 40-45 50 62
UZQ04600 Q.E. AY10/3700 400 3F 37 50 60 82
72
ADRM
SINGLE PHASE STARTERS FOR THE CONTROL OF ONE OR TWO DRAINING AND
SEWAGE ELECTRIC PUMPS
Main components
- IP 54 metallic case
- General switch
- Fuse block with fuses for the
electric pump
- Contactor with thermal relay
auxiliary circuit
- Terminal board with level control
devices
- Cable gland
- Function light
- Power led ADRM10
- Level alarm
ADRM 10 ADRM 20
- Electronic signalling, control - Electronic signalling, control
and command card and command card equipped
- For the control of one electric pump with cyclic startings converter
- Weight : Kg 5,5 - For the control of two electric pumps
- Weight : Kg 7,5 ADRM20
Technical features
- Power supply voltage : 220V/240V 1F 50 Hz Connection plan
- External dimensions : 220 x 270 x 185 mm
ADRM10
Type of functioning
- Manual through general switch.
- Automatic through float switch.
Limits in use
- Environmental temperature : -5 / +40 °C ADRM20
- Standards : EN 60730 - EN 60439
- CE040030 - Panel wall mount fixing fins
CONTROL PANELS
- UZA00200 - Optical, acoustic alarm
- Float switches (see accessories table)
Supply Voltage Nominal Field

50Hz power Suitable Pumps
CODE MODEL A
V Kw Hp min max
UZQ06500 Q.E. ADRM10/55 230 1F 0,55 0,75 2,5 4
UZQ06700 Q.E. ADRM10/75 230 1F 0,75 1 4 6,3
UZQ06800 Q.E. ADRM10/110 230 1F 1,1 1,5 6,3 10
UZQ06900 Q.E. ADRM10/150 230 1F 1,5 2 10 16 DRENOX OMNIA
UZQ08600 Q.E. ADRM20/55 230 1F 2x0,55 2x0,75 2,5 4 PRIOX MINIVORT P
MINIVORT PP
UZQ08800 Q.E. ADRM20/75 230 1F 2x0,75 2x1 4 6,3
UZQ08900 Q.E. ADRM20/110 230 1F 2x1,1 2x1,5 6,3 10
UZQ09000 Q.E. ADRM20/150 230 1F 2x1,5 2x2 10 16
73
ADRD
SEWAGE ELECTRIC PUMPS
Main components ADRD10

- IP 54 metallic case - Electronic signalling,
- General switch control and command card
- Fuse block with fuses for - For the control of one
the electric pump electric pump
ADRD10
auxiliary circuit
- Terminal board with level control
ADRD20
devices - Electronic signalling, control
- Cable gland and command card equipped
- Function light with cyclic startings converter
- Power led - For the control of two
- Thermal block light electric pumps
- Level alarm ADRD20
Technical features
- Power supply voltage : 400V 3F 50 Hz
- Weight : Kg 5,5
Connection plan
ADRD10
Type of functioning
- Manual through general switch
- Automatic through float switch
Limits in use
- Environmental Temperature : -5 / +40 °C
(without forming of condense) ADRD20
- Standards: EN 60730 - EN 60439
- CE040030 - Wall mount fixing fins

CODE MODEL 50Hz power Suitable Pumps
A
V Kw Hp min max
UZQ07000 Q.E. ADRD10/55 400 3F 0,55 0,75 1 1,6
UZQ07100 Q.E. ADRD10/110 400 3F 1,1 1,5 1,6 2,5
UZQ07300 Q.E. ADRD10/150 400 3F 1,5 2 2,5 4
UZQ07400 Q.E. ADRD10/300 400 3F 3 4 4 6,3
UZQ07500 Q.E. ADRD10/500 400 3F 5 6,7 6,3 10
UZQ07700 Q.E. ADRD10/750 400 3F 7,5 10 10 16
UZQ07800 Q.E. ADRD10/900 400 3F 9 12 13 19
UZQ09100 Q.E. ADRD20/55 400 3F 2x0,55 2x0,75 1 1,6 DRENOX PRIOX
MINIVORT P
UZQ09200 Q.E. ADRD20/110 400 3F 2x1,1 2x1,5 1,6 2,5 MINIVORT PP
UZQ09400 Q.E. ADRD20/150 400 3F 2x1,5 2x2 2,5 4
UZQ09500 Q.E. ADRD20/300 400 3F 2x3 2x4 4 6,3
UZQ09600 Q.E. ADRD20/500 400 3F 2x5 2x6,7 6,3 10
UZQ09800 Q.E. ADRD20/750 400 3F 2x7,5 2x10 10 16
74
ADRY
SEWAGE ELECTRIC PUMPS, STAR-TRIANGLE START
Main components
- IP 54 metallic case
- General switch
- Fuse block with fuses for the electric pump
- Fuse block with fuses on the auxiliary circuit
- Electronic signalling, control and command
- card equipped with:
- Function light
- Power led
- Electronic keyboard with leds VOLT/AMPERE
- Terminal board with level control devices
- Cable gland
ADRY10 ADRY20
- Electronic signalling, control - Electronic signalling, control
and command card and command card equipped
- For the control of one electric pump with cyclic startings converter
- Weight : Kg 12-60 - For the control of two electric pumps
- Weight : Kg 15-85
Technical features Connection plan

- Protection level : IP54 ADRY10
- Power supply voltage : 400V 3F 50 Hz
Type of functioning
- Manual through general switch.
- Automatic through float switch.
Limits in use
- Environmental temperature: -5 / +40 °C
- Relative humidity : 50% at 40°C ADRY20
- Standards : EN 60730 - EN 60439
- CE040020 - Wall mount fixing fins
CONTROL PANELS

50Hz power Suitable Pumps
CODE MODEL
A
V Kw Hp min max
UZQ07900 Q.E. ADRY10/900 400 3F 9 12 12,9 19
UZQ08100 Q.E. ADRY10/1100 400 3F 11 15 17,2 24,1
UZQ08200 Q.E. ADRY10/1500 400 3F 15 20 22,4 32,8
UZQ08300 Q.E. ADRY10/2200 400 3F 22 30 29,3 44,8
UZQ08400 Q.E. ADRY10/2500 400 3F 25 33,5 37,9 55,2
Sewage pumps
UZQ10000 Q.E. ADRY20/900 400 3F 2x9 2x12 12,9 19
UZQ10200 Q.E. ADRY20/1100 400 3F 2x11 2x15 17,2 24,1
UZQ10300 Q.E. ADRY20/1500 400 3F 2x15 2x20 22,4 32,8
UZQ10400 Q.E. ADRY20/2200 400 3F 2x22 2x30 29,3 44,8
UZQ10500 Q.E. ADRY20/2500 400 3F 2x25 2x33,5 37,9 55,2
75
Accessories
ACCESSORIES FOR CONTROL PANELS
PANEL SUPPORT CHUCK KIT

Fixing fin kit for “wall” assembly of the panel
CODE TYPE CONTROL PANELS
CE040010 Fixing fins AD10
CE040020 Fixing fins AY10 - ADRY10 - ADRY20
CE040030 Fixing fins ADRM10 - ADRM20 - ADRD10 - ADRD20
OPTICAL AND ACOUSTIC ALARM

Alarm kit for draining panels, composed by a 12V cc siren and red signalling led installed in an
IP54 plastic box with cable gland.
ADRM10 - ADRM20 - ADRD10 - ADRD20

UZA00200 A0A12C alarm 12 V ADRY10 - ADRY20
SUBMERGED LEVEL REGULATORS

“MERCURY” MC type 15 m float switch, watertight up to a depth of 100 m, insensible to
condense, fit for waste water.
ADRM10 – ADRM20 – ADRD10 – ADRD20
ZA008120 Mercury float switch MC.15m ADRY10 – ADRY20
COUNTERWEIGHT LEVEL REGULATORS

Key type level regulator for emptying and refilling applications equipped with 3 m or 10 m
cable, fit for uses with clean water and residues of agglomerate.
MICROSTART 3-3 QES PLUS – AT
ZA000590 Emptying/filling AD10 – AY10
ZA000330 MICROSTART 10-2 Emptying All the panels that use an external remote control
ZA000650 MICROSTART 5-2 Emptying All the panels that use an external remote control
ZA000750 MICROSTART 10-2 (PVC) Emptying All the panels that use an external remote control
MICROSTART 10-3 QES PLUS – AT
ZA008510
Emptying/filling AD10 – AY10
ELECTRODES FOR LEVEL CONTROL OF CONDUCTIBLE LIQUIDS

Level electrodes particularly fit for conductible liquids up to a maximum temperature of
40°C. For the connection between electrode and panel you can use an isolated cable with
maximum 4 mm2 connection and max. length of 100m.
ECL electrodes for level control of AT – AD10 –AY10
UZA00100 conductible liquids
PRESSURE SWITCH
QES PLUS – AT
ZA003110 PM 5 ITL (6 Atm. Max) AD10 – AY10
QES PLUS – AT
ZA006400 PM 12 ITL (12 Atm. Max) AD10 – AY10
QES PLUS – AT
ZA000630 PM 6 TEL (6 Atm. Max) AD10 – AY10
QES PLUS – AT
ZA000640 PM 12 TEL (12 Atm. Max) AD10 – AY10
76
75
Accessories
Accessories
CODE MODEL DESCRIPTION
ZA003110 PM 5 ITAL PRESSURE SWITCH - 6 ATM - ITALTECNICA

ZA006400 PM 12 ITAL PRESSURE SWITCH - 12 ATM - ITALTECNICA
ZA009550 PTI LP3 ITAL PRESSURE SWITCH - 6 ATM - TELEMECANIQUE
ZA000630 PT 6 TEL PRESSURE SWITCH - 12 ATM - TELEMECANIQUE
ZA000640 PT 12 TEL PRESSURE SWITCH - LP3 INVERSED - 1/4” F ITALTECNICA
ZA002030 MAR 6 6 BAR RADIAL MOUNTING PRESSURE GAUGE

ZB902150 MAP 6 6 BAR REAR MOUNTING PRESSURE GAUGE
ZA000680 MAR 10 10 BAR RADIAL MOUNTING PRESSURE GAUGE
ZA000780 MAP 10 10 BAR REAR MOUNTING PRESSURE GAUGE
ZA000270 TF 500 1” x mm 500 M-F FLEXIBLE PIPE

ZA007430 GA 1” 1/4 1” 1/4 x mm 400 M-F FLEXIBLE PIPE
ZA007440 GA 2” 2” x mm 500 M-F FLEXIBLE PIPE
ZA007450 GA 2” 1/2 2” 1/2 x mm 500 M-F FLEXIBLE PIPE
ZA007460 GA 3” 3” x mm 500 M-F FLEXIBLE PIPE
ZA000240 R3V 3 WAY BRASS FITTING 1”

ZA000260 R5V 5 WAY BRASS FITTING 1”
D6024KKK MBF BROMOBUTYL DIAPHRAGM FOR FLEXINOX 20 LITER TANKS

ZA006380 MBB BROMOBUTYL DIAPHRAGM FOR INOX TANKS
ZA003050 MGS 2 FOOD-QUALITY RUBBER DIAPHRAGM FOR 2 LITER TANK
ZA010200 MGS 24 FOOD-QUALITY RUBBER DIAPHRAGM FOR 24 LITER TANK
ZA009190 MB 60 FOOD-QUALITY RUBBER DIAPHRAGM FOR 60 LITER TANK
ACCESSORIES
ZA004520 KA4 SUCTION KIT 4 m

ZA007110 KA7 SUCTION KIT 7 m
ZA004080 NIPPLEX 1” M-M 1” MALE THREADED NIPPLE FOR SUCTION KIT
ZB401770 B1 PRESSED STEEL BASE KIT WITH SCREWS FOR

MCX 80-120 E JETINOX 45-60-70
MAX 80-120
ZBR05500 B2 PRESSED STEEL BASE KIT WITH SCREWS FOR
MCX 200 E JETINOX 90
77
Accessories
Accessories
CODE MODEL DESCRIPTION

ZA000020 VF 1” 1” PLASTIC FOOT VALVE
ZA003000 VFF 1” 1” BRASS FOOT VALVE WITH STAINLESS STEEL FILTER
ZA003190 VFF 1” 1/4 1” 1/4 BRASS FOOT VALVE WITH STAINLESS STEEL FILTER
ZA003200 VFF 1” 1/2 1” 1/2 BRASS FOOT VALVE WITH STAINLESS STEEL FILTER
ZA003210 VFF 2” 2” BRASS FOOT VALVE WITH STAINLESS STEEL FILTER
ZA002020 VAR 1” 1” BRASS NON RETURN VALVE
ZA003220 VAR 1” 1/4 1” 1/4 BRASS NON RETURN VALVE
ZA003230 VAR 1” 1/2 1” 1/2 BRASS NON RETURN VALVE
ZA003240 VAR 2” 2” BRASS NON RETURN VALVE
ZA008430 RVFF 2 2” BALL VALVE WITH FULL BORE
WM-AC-0060 WM0060 MEMBRANE x WM0060

ZA009330 VRP 1” 1/4 STAINLESS STEEL BALL CHECK VALVE 1” 1/4 F

ZA009320 VRP 1” 1/2 STAINLESS STEEL BALL CHECK VALVE 1” 1/2 F
ZA009310 VRP 2” STAINLESS STEEL BALL CHECK VALVE 2” F
ZA000590 MICROSTART 3-3 3 M FLOAT 3 WIRES FOR EMPTYING/FILLING

ZA000330 MICROSTART 10-2 10 m FLOAT 2 WIRES FOR EMPTYING/FILLING H07-RNF
ZA000650 MICROSTART 5-2 5 m FLOAT 2 WIRES FOR EMPTYING H05-RNF
ZA000750 MICROSTART 10 -2 10 m PVC FLOAT 2 WIRES FOR EMPTYING
ZA000350 MICROSTART S 5-2 5 m FLOAT 2 WIRES WITH PLUG AND SOCKET H05 - RNF
ZA010070 MICROSTART S10-2 10 m PVC FLOAT 2 WIRES WITH PLUG AND SOCKET
ZA008120 MERCURY 15 M 15 m FLOAT SWITCH MERCURY MC
ZA008510 MICROSTART 10-3 10 m FLOAT 3 WIRES FOR EMPTYING/FILLING
ZA000820 CP COUNTERWEIGHT FOR FLOAT

2
ZA000430 CABLE 4 x 1,5 NEOPRENE HO7 RNF 4 WIRE CABLE 1,5 MM WIRES
2
ZA000440 CABLE 4 x 2,5 NEOPRENE HO7 RNF 4 WIRE CABLE 2,5 MM WIRES
2
2
2
ZA003370 JOINT KIT 2,5 HEAT-SHRINK SPLICING KIT FOR CABLES UP TO 4 X 2,5 MM2
ZA003390 JOINT KIT 6 HEAT-SHRINK SPLICING KIT FOR CABLES UP TO 4 X 6 MM2
ACCESSORIES
ZA003380 JOINT KIT 10 RESIN FILLED SPLICING KIT FOR CABLES UP TO 4 X 10 MM2
ZA009410 JOINT 2,5 HEAT-SHRINK SPLICING JOINT FOR CABLES UP TO 1 X 2,5
ZA009430 JOINT 6 HEAT-SHRINK SPLICING JOINT FOR CABLES UP TO 4 X 6
ZA009450 JOINT 10 RESIN FILLED SPLICING JOINT FOR CABLES UP TO 4 X 10
ZA000900 RCF 30 1” 1/4 FEMALE ELBOW HOSE HOLDER ø 30 mm

ZA000910 RCF 40 1” 1/2 FEMALE ELBOW HOSE HOLDER ø 40 mm
ZA000920 RCF 50 2” FEMALE ELBOW HOSE HOLDER ø 50 mm
ZR001690 - FLANGE KIT GH FOR DHR 9
78
77
Accessories
FILTERS AND FILTERING CARTRIDGES
CARTRIDGES BOWL
Min.
CODE DESCRIPTION quantity
ZB401390 ANTI-SCALE FILTER COMPLETE ( FOR WASHING MACHINE ) 1
ZB900010 5” FILTER 1” CONNECTION 1
ZB900060 CF 7” 1” CONNECTION 1
ZB900030 CF 10” 1” CONNECTION 1
ZB900070 CF 10” 1” 1/4 CONNECTION 1
FILTERING CARTRIDGES
Nom. Min.
CODE DESCRIPTION filtr. µm quantity
ZB401350 5” CARTRIDGE FA (WOUND WIRE) 20 20
ZB401370 5” CARTRIDGE NY (NYLON MESH) 60 20
ZB401410 7” CARTRIDGE FA (WOUND WIRE) FOR FILTER 1” CONNECTION 20 20
ZB401550 7” CARTRIDGE NY (NYLON MESH) FOR FILTER 1” CONNECTION 60 20
ZB401360 10” CARTRIDGE FA (WOUND WIRE) FOR FILTER 1” CONNECTION 20 20
ZB401570 10” CARTRIDGE FA (WOUND WIRE) FOR FILTER 1 1/4” CONNECTION 20 20

ACCESSORIES
ZB401380 10” CARTRIDGE NY (NYLON MESH) FOR FILTER 1” CONNECTION 60 20
ZB401580 10” CARTRIDGE NY (NYLON MESH) FOR FILTER 1 1/4” CONNECTION 60 20
ZB401420 10” CARTRIDGE CA (NYLON MESH + ACTIVE CARBON) 60 20
ZB401620 10” CARTRIDGE PL (CRYSTALLINE POLYPHOSPHATE) - 1
78
79
The complete Nocchi documentation, including exploded views and spare parts list, is available on line on
www.nocchi.it
BELGIUM GERMANY REPUBLIC OF SOUTH AFRICA
Industriepark Wolfstee, Jung Pumpen GmbH P.O. Box 11325, Selcourt 1567,
Toekomstlaan 30 Industriestr. 4-6 15 Miller Road,
B-2200 HERENTALS D-33803 Steinhagen Nuffield, Springs - Gauteng
Tel. +32.14.25.99.11 Tel. +49.52.04.17-0 Tel. +27.11.818.5818
Fax. +32.14.25.99.75 Fax +49.52.04.17-331 Fax +27.11.818.3710
GB
www.pentairwater.com www.jung-pumpen.de
FRANCE ITALY UNITED ARAB EMIRATES

50 Hz
BP 92 Vedéne - 84965 Via Masaccio, 13 Apt. # 404, Al Buhaira Building-Corniche Street

LE PONTET Cedex - AVIGNON 56010 Lugnano (Pisa) Al Buhaira - Al Majaz
Tel. 04.90.480.880 Tel. +39.050.71.61.11 P.O. Box 32789
Fax 04.90.480.888 Fax. +39.050.70.31.37 Sharjah, U.A.E.
www.nocchi.it www.nocchi.it Tel. +971.65.72.05.52
Fax. +971.65.72.05.53
GB - 1° ED. 052010 - COD. NV260PH80
140, avenue Roland Garros Via Brughiera 1 - 20010 www.pentairwater.com

78532 BUC CEDEX PREGNANA MILANESE (MI)
Tel. +33.(0)1.39.24.15.00 Tel. +39.02.93.27.111
Fax. +33.(0)1.39.56.03.90 Fax. +39.02.93.27.1154
www.pentairwater.com www.pentairwater.com

Catalog Pompe Nocchi Submersibile

Uploaded by

Copyright:

Available Formats

Catalog Pompe Nocchi Submersibile

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Catalog Pompe Nocchi Submersibile

Uploaded by

Copyright:

Available Formats

Submersible and submerged pumps

Drainage and sewage pumps

4” MULTISTAGE CENTRIFUGAL SUBMERSIBLE PUMPS COMPLETE WITH

SUBMERSIBLE MULTISTAGE CENTRIFUGAL PUMP

4” MULTISTAGE CENTRIFUGAL SUBMERSIBLE PUMPS COMPLETE WITH

4” MULTISTAGE CENTRIFUGAL SUBMERSIBLE PUMPS COMPLETE WITH

SCM 4 Plus / HF PUMP-

SA 6” MULTISTAGE SUBMERSIBLE PUMPS COMPLETE WITH MOTOR 26

SA PUMP-ENDS 6” SUBMERSIBLE PUMPS 31

6” MOTORS ELECTRIC MOTORS Ø 6” FOR SUBMERSIBLE PUMPS 32

DP SUBMERSIBLE PUMPS FOR DRAINING CLEAR WATER 35

SIMER “SIMO” PUMP SUBMERSIBLE PUMPS FOR DRAINING CLEAR WATER 37

DPC SUBMERSIBLE PUMPS FOR DRAINING CLEAR WATER 39

DRENOX SUBMERSIBLE PUMPS FOR DRAINING CLEAR WATER 41

DPV SUBMERSIBLE PUMP FOR DRAINING DIRTY WATER 44

OMNIA SUBMERSIBLE PUMP FOR DRAINING DIRTY WATER 46

BIOX XS SUBMERSIBLE EFFLUENT VORTEX PUMPS FOR DIRTY WATER 48

PRIOX SUBMERSIBLE EFFLUENT VORTEX PUMPS FOR DIRTY WATER 50

MINIVORT P SUBMERSIBLE EFFLUENT VORTEX PUMPS FOR DIRTY WATER 52

MINIVORT PP SUBMERSIBLE EFFLUENT VORTEX PUMPS FOR DIRTY WATER 54

VACUSYSTEM COLLECTION AND PUMPING STATIONS FOR DIRTY WATER 56

VERSAILLES SUBMERSIBLE PUMPS FOR FOUNTAINS AND WATER FEATURES 62

EXPANSION TANKS IN COMPOSITE MATERIAL 65

EXPANSION TANKS STAINLESS STEEL 66

EXPANSION TANKS PAINTED STEEL 67

FLUSSCONTROL - F. BASIC ELECTRONIC

SINGLE PHASE STARTER FOR THE CONTROL AND PROTECTION OF

THREE PHASE ELECTRIC PANEL FOR THE PROTECTION AND CONTROL OF

THREE PHASE STARTER FOR THE CONTROL OF SUBMERGED OR SURFACE

THREE PHASE STARTERS FOR THE CONTROL OF SUBMERGED OR SURFACE

SINGLE PHASE STARTERS FOR THE CONTROL OF ONE OR TWO DRAINING

Accessories ACCESSORIES FOR CONTROL PANELS 76

4” SUBMERSIBLE MOTORS FOR SCM 4 PLUS

6” MOTORS ELECTRIC MOTORS Ø 6” FOR SUBMERSIBLE PUMPS 32

Accessories ACCESSORIES FOR CONTROL PANELS 76

THREE PHASE STARTER FOR THE CONTROL OF SUBMERGED OR SURFACE

SINGLE PHASE STARTERS FOR THE CONTROL OF ONE OR TWO DRAINING

THREE PHASE ELECTRIC PANEL FOR THE PROTECTION AND CONTROL OF

THREE PHASE STARTERS FOR THE CONTROL OF SUBMERGED OR SURFACE

BIOX XS SUBMERSIBLE EFFLUENT VORTEX PUMPS FOR DIRTY WATER 48

4” MULTISTAGE CENTRIFUGAL SUBMERSIBLE PUMPS COMPLETE WITH

SUBMERSIBLE MULTISTAGE CENTRIFUGAL PUMP

DP SUBMERSIBLE PUMPS FOR DRAINING CLEAR WATER 35

CONTENTS IN ALPHABETIC ORDER

DPV SUBMERSIBLE PUMP FOR DRAINING DIRTY WATER 44

DRENOX SUBMERSIBLE PUMPS FOR DRAINING CLEAR WATER 41

EXPANSION TANKS IN COMPOSITE MATERIAL 65

EXPANSION TANKS PAINTED STEEL 66

EXPANSION TANKS STAINLESS STEEL 67

FLUSSCONTROL - F. BASIC ELECTRONIC

MINIVORT P SUBMERSIBLE EFFLUENT VORTEX PUMPS FOR DIRTY WATER 52

MINIVORT PP SUBMERSIBLE EFFLUENT VORTEX PUMPS FOR DIRTY WATER 54

OMNIA SUBMERSIBLE PUMP FOR DRAINING DIRTY WATER 46

PRIOX SUBMERSIBLE EFFLUENT VORTEX PUMPS FOR DIRTY WATER 50

SINGLE PHASE STARTER FOR THE CONTROL AND PROTECTION OF

SA 6” MULTISTAGE SUBMERSIBLE PUMPS COMPLETE WITH MOTOR 26

SA PUMP-ENDS 6” SUBMERSIBLE PUMPS 31

4” MULTISTAGE CENTRIFUGAL SUBMERSIBLE PUMPS COMPLETE WITH

4” MULTISTAGE CENTRIFUGAL SUBMERSIBLE PUMPS COMPLETE WITH

SCM 4 Plus / HF PUMP-