Scribd Logo
Upload

Welcome to Scribd!

  • 450 views

    DN670 Ductile Iron Manhole Cover D400 EN124

    Uploaded by

    munisipalcastings
    Ductile iron manhole cover of 360 kN or 400 kN (D400 - EN124) loading class; - Draft of private standard of special product.

    Copyright:

    Attribution No-Derivs (BY-ND)
    Download as PDF, TXT or read online from Scribd

    DN670 Ductile Iron Manhole Cover D400 EN124

    Uploaded by

    munisipalcastings
    450 views11 pages
    Ductile iron manhole cover of 360 kN or 400 kN (D400 - EN124) loading class; - Draft of private standard of special product.

    Copyright

    © Attribution No-Derivs (BY-ND)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Ductile iron manhole cover of 360 kN or 400 kN (D400 - EN124) loading class; - Draft of private standard of special product.

    Copyright:

    Attribution No-Derivs (BY-ND)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    450 views11 pages

    DN670 Ductile Iron Manhole Cover D400 EN124

    Uploaded by

    munisipalcastings
    Ductile iron manhole cover of 360 kN or 400 kN (D400 - EN124) loading class; - Draft of private standard of special product.

    Copyright:

    Attribution No-Derivs (BY-ND)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 11

    A PROPOSAL ON THE SUBJECT OF PRIVATE STANDARDIZATION THE SUBJECT OF PRIVATE STANDARD DEVELOPMENT

    Date of proposal: Author of proposal:


    THE PROPOSAL

    Secretariat of Organization TCs WGs

    Title of proposal: "Dimensions of special product of vehicular area manhole cover, of round opening, of cast iron construction, size DN.670mm or 26.50in (D.670/675), and 360 or 400 kN loading class." Material: - ductile iron - of grade to fit the loading class in compliance with thicknesses of pieces.

    The document proposal comes to settle up a dimensional based private standard document (as case, a publication / deliverable) concerning the dimensions of special product of a street manhole cover - which may be in concordance with requirements of one or more regional basic standard(s) of cast/ductile iron manhole covers, - e.g. the regional CEN standard "EN124 - Gully tops and manhole tops for vehicular and pedestrian areas. Design requirements, type testing, marking, quality control", - or, with other basic standard concerning street, or residential area, manhole covers - as long as the basic standard (e.g. as the EN124 is) does not apply for dimensions of special products of manhole covers. As conclusion, the proposed private standard document (norm) aims to specify the main dimensions for a special product of a ductile iron vehicular area manhole cover of a DN.670mm / 26.50in, of round opening; - and must, as case may be, completed with other standards which refers to testing, marking, quality control. (e.g. the EN124 CEN standard).
    Short description of design related to product and main dimensions:

    > Round (circular) frame with round opening; - overall dia. of lid piece: 670mm (26.375in), - top opening of frame: dia. 675 (26.5625in), - round, - top dia. of frame: 710mm, (~28in), - round - lower opening of base of frame (over the flange) - dia. 795 (~31.25in), to fit a 800mm dia. of manhole top opening (entry). - clearance (clear opening) of frame, - about 605mm (~23.75in), - 4 vent/key holes of about 40sq.cm. (~6.20sq.in) at all clear opening; which also allows an easy opening using common tools, - optional, on designs of lid and frame - a hinge or locking system may be added.

    The product which the subject of standardization consists in, may be useful for outdoor networks - water supply, as well sewerage chambers or storm water, - in vehicular areas.
    The type of public standard document, as we consider the proposal may later transform into:

    > concerning the terminology of EN45020:2006 description: - prestandard (3.3), product standard (5.4), technical specification (3.4), unilaterally aligned standard (6.8), - all of these, in order to complete with CEN standard EN124, which is a basic standard (5.1). > concerning the terminology of ISO/CEI-2:2004: - international standard (3.3), technical specification (3.4), technical report (3.5), publicly available specification (3.7).

    LID PIECE of D.670/675 ; 675/680 ; 680/685


    - loading class: 360 ; 400 kN > draft for CEN standards

    Front side plane view - anti-skid pattern detail


    (rounded slots)

    18

    Trunks Slots

    0 83 8 30 30 30 8 08 3

    p t to a

    INSCRIPTION RESERVED AREA Ddohc 205 dohc


    (1) (1) (2) (1) (1) (1)

    O 152 (6) at top, and 157 at base O 254 (10) at base level O 330 axe circle dia. (middle of slots) ( middle
    m

    O 408 O 484 O 560 (22)

    the same

    O 636 (25) at base level DN.670 Overall dia. O 670

    (1) - The surface which is at top of anti-skid trunks; (2) - The surface on base of anti-skids, but also at top of lid plate (structure). Holes are in number of 4 at 90 degree each to the sequent others, and have an clear opening (clearance) dia of 32, 35, or 38mm.

    30
    (2)

    LID Piece of DN.670 (rated dia.)


    Loading class; - 360...400 kN

    Front side plane view - anti-skid pattern

    An ti(tru skid nk s s)

    O 152(154)/157

    A1
    (2) (2) (1) (1)

    A1 MAR KING RESERVED 15 A R E A


    (1) (2)
    35 1 Aat t 38 1 9 35 1 9 op 6 38 35 1 9 35 16 a t b 38 1 6 3 ase 8

    54

    (1) (1) (1)

    (1)

    O 250 - at base

    ttop/base
    O 650 - at base of trunks
    38/41
    35/38

    DN 670

    Overall dia.

    O 670

    Aanti-skid pattern trunks

    Ddohc 205

    (1) - The surface which is at top of anti-skid trunks, - about 3...4 mm above (2); (2) - The surface on base of anti-skids, but at top of lid plate (structure). Holes are in number of 4 at 90 degree each to the sequent others, and have an clear opening (clearance) dia of 32, 35, or 38mm.

    32/35

    LID Piece - DN.670 (D.670/675)


    > Loading class; - 360; 400 kN

    Front side plane view.


    - Anti-skid pattern details of solid (non-holes) lid

    O 500 15 15

    RVED E

    S
    IT IT

    RE

    E E
    63

    ON I

    15
    (1) (2) (2) (1)

    (1)

    63 x 6 = 378 in-between extreme ribs centres

    DN.670

    (1) - the surface which is at top of anti-skid ribs, and also at the top of lid, (2) - the surface at base of ribs, but at top of lid plate (structure). The top height of inscriptions is at top level of ribs, (1).

    INSC INSC
    Overall dia. O 670

    R R IP IP

    LID Piece of DN.670 (D.670/675)


    - Loading class, - 360; 400 kN

    Backside plane view


    Structure with 3 circular, and 4 radial ribs, (similar of those with only 2 circular and 4 radial ribs) as well, with 4 vent holes, (and also, similar of solid lid, without holes, as well, with or without the middle rib)

    > ductile iron construction

    O 635

    45
    O 385 O 140

    Holes border reinforcement

    A
    Middle rib (optional)

    135

    Outer rib (Laying surface)

    DN. 670

    Overall dia. O 670

    Note! In case of lids having the structure with 2 circular and 4 radial reinforcing ribs, - only the inner as well the outer rib exists, while the middle one does not, but the 4 radial ribs exist in both of cases. Holes, in number of 4, are at 90 degree each to sequent ones, and have a circular, ellipsoidal, or a long with rounded ends shape of clear opening. The circular ones have a clearance dia of 32, 35, or 38 mm; The ellipsoidal holes have a clear opening of 42x30; 40x27, as well the rounded ends ones, have 40x27 or 38x25 mm opening

    R ei nf rib orc s i ng

    Inner rib

    LID Piece - DN.670 (D.670/675)


    > ductile iron construction - Loading class: - 360; 400 kN

    Vertical median partial section A - A

    DN. 670

    Overall dia.

    O 670

    Ddohc Ddohc

    (distance in-between opposite holes centres)

    1,5...2

    3...4

    18 depth of hole border R

    5 x4 ,5 1

    (1)

    (2)

    (3) (4)

    18 18

    > 1:12

    52

    70

    > 1:10

    Laying surface

    Circular reinforcing outer rib

    16

    Radial reinforcing rib

    Circular reinforcing middle rib

    Radial reinforcing rib

    11; 12,5 (7/16; )

    11; 12,5 O 635 O 385

    Circular reinforcing inner rib

    O 140

    (1) - the level of top of anti-skid trunks (2) - the level which is at base of anti-skid trunks (pattern), but at top of lid plate (structure) (3) - the top level of spurs (only if exists) (4) - the depth of inscription (applies only for the lids with circular holes)

    90

    > 1:12

    10

    2
    O

    Grated-Lid Piece DN.670 (D.670/675)


    Loading class, - 360; 400 kN

    Front side plane view

    Fictive dia of holed area - about ~ O 605 Reinforcing ribs - on backside

    12,5 == 38 25
    O O O

    DN.670

    Overall dia. O 670

    FRAME Piece - DN.670 (D.670/675)


    - ductile iron construction > Loading class, - 360; 400 kN

    Top plane view

    Top opening dia. O 675 (top inner dia.)

    (DN. 675)

    17,5

    Laying surface (not shown in A-A section)


    5 60

    A A
    . di a g) ce in ran pen ea o Cl lear (c

    8-10

    at end

    Reinforcing ribs

    Top outer dia. O 710 Overall dia. O 925

    FRAME Piece - DN.670 - (D.670/675)


    > ductile iron structure - Loading class: - 360; 400 kN

    Vertical section A-A

    You might also like