SPRING LOADED POWER SLIP

Model : ABSPS-27
Autobahn make Spring Loaded
Power Slip (ABSPS-27) is foot-
operated, designed to protect
drill pipes and tubing with slip
range from 3½” to 4½” and 4½”
to 5½” while setting and
releasing by simply changing
inserts. The slip can be set simply
by applying foot pressure on the
slip set ring. This eliminates the
manual setting and lifting of slip.
The unit consists of four slip
segments with inserts and four
coil spring cartridges as a counter
balance to offset the weight of
slips when in the upper released
position.
It is suitable to fit into 27½” and
37½” to 49½” Rotary table with
API Pin Drive Master Bushing.

ABSPS-27
Figure No. 29

The unit consists of three major assemblies as under:

1. Top Cover Assembly

Top cover assembly is ergonomically designed with two halves with slip set ring. Top cover assembly is mounted on four slip
hangers with pins.

2. Slip Assembly
Four slip segments of 16½” grip length for gripping the tubular size 4½” to 5½” are dressed with 48 Nos Inserts, 4 Nos Insert
Retaining Ring and 8 Nos Allen Screw.

3. Bowl Assembly
Bowl assembly consists of two halves connected with bowl hinge pin to enable the installation and removal of the power slip
from the Master Bushing. Bowl assembly is provided with four numbers of Coil Spring Cartridges and Foot Pedal for releasing
the slips.

www.autobahnindustries.com 18
PART LIST OF SPRING LOADED POWER SLIP
Qty.
S. No. P/N Description
Per Unit
1 SPS-28 Spring Cartridges 04 No.
2 SPS-29 Foot Pedal 01 No.
3 SPS-31 Slip Hangers 04 No.
4 SPS-32 5½” Slip Segment to handle 4½” – 5½” Drill Pipe. 04 No.
5 SPS-33 4½” Slip Segment to handle 3½” – 4½” Drill Pipe. 04 No.
6 SPS-40 Slip Bowl 01 No.
7 SPS-41 Top Cover 01 No.
8 SPS-42 Brass Bush 04 No.
9 SPS-43 Hinge Pin for Bowl 01 No.
10 SPS-44 Hanger Top Pin 04 No.
11 SPS-45 Hanger Bottom Pin 04 No.
12 SPS-46 Lifting Sling (Four Hook Type) 01 No.
13 SPS-47 Oil Seal 04 No.
14 SPS-48 Foot Pedal Pin 01 No.

Inserts to handle 3½” Drill Pipe for Slip Body Size 4½”
15 5163 04 Set
(One set consists of 08 no. of Inserts)

Inserts (Taper Design) to handle 3½” Drill Pipe for Slip Body Size 4½”
16 5163-B 04 Set
(One set consists of 04 no. of Inserts)

Inserts to handle 4” Drill Pipe for Slip Body Size 4½”

17 5164 04 Set
(One set consists of 08 no. of Inserts)

Inserts (Taper Design) to handle 4” Drill Pipe for Slip Body Size 4½”
18 5164-B 04 Set
(One set consists of 04 no. of Inserts)

Inserts to handle 4½” Drill Pipe for Slip Body Size 4½”
19 5165 04 Set
(One set consists of 12 no. of Inserts)

Inserts to handle 4½” Drill Pipe for Slip Body Size 5½”
20 5168 04 Set
(One set consists of 08 no. of Inserts)

Inserts (Taper Design) to handle 4½” Drill Pipe for Slip Body Size 5½”
21 5168-B 04 Set
(One set consists of 04 no. of Inserts)

Inserts to handle 5” Drill Pipe for Slip Body Size 5½”

22 5169 04 Set
(One set consists of 08 no. of Inserts)

Inserts (Taper Design) to handle 5” Drill Pipe for Slip Body Size 5½”
23 5169-B 04 Set
(One set consists of 04 no. of Inserts)

Inserts to handle 5½” Drill Pipe for Slip Body Size 5½”
24 5170 04 Set
(One set consists of 12 no. of Inserts)

19 www.autobahnindustries.com
EXPLODED VIEW OF SPRING LOADED POWER SLIP

&

Figure No. 30

www.autobahnindustries.com 20