Biotechnology MODULE - 5

Emerging Areas
in Biology

30
Notes
BIOTECHNOLOGY

At home we prepare food items such as yoghurt (curd), cake, bread, idli and dosa
by the action of microorganisms, such as the bacteria and fungi. Brewers use yeast
(fungus) to make beer. Antibiotics such as penicillin are obtained from certain fungi.
Nowadays, biological processes such as fermentation by microorganisms is being
used in industry on a commercial scale for making food, drinks, drugs (medicines)
and industrial chemicals. Modern techniques in biotechnology are programming
microorganisms for this task. In this lesson, you will learn about use of microorganisms
in industries.

OBJECTIVES
After completing this lesson, you will be able to:
z appreciate the importance of biotechnology in human welfare;
z explain the use of biotechnology in industry;
z list the microbes used in the industry and the products manufactured through
their use;
z explain fermentation and outline the process of making alcohol by using
microorganisms;
z describe the process of making yoghurt and cheese on a large scale;
z explain the contribution of microorganisms in making antibiotics and vaccines;
z define genetic engineering and mention its utility;
z define transgenic organisms, mention the steps in their production and cite a
few examples of transgenic plants and animals;
z explain the process and importance of gene therapy;
z explain bioremediation and biopesticides.

BIOLOGY 293
MODULE - 5 Biotechnology
Emerging Areas
in Biology 30.1 BIOTECHNOLOGY
The word biotechnology has come from two words, bios (meaning biology) and
technology (meaning technological application). Thus biotechnology is defined as
the industrial application of living organisms and their biological processes
such as biochemistry, microbiology, and genetic engineering, in order to make
best use of the microorganisms for the benefit of mankind.
Notes Biotechnology is applied in many areas to produce foods and medicines, in the
development of new diagnostic tools, gene therapy, and DNA finger-printing for
forensic purposes.

30.1.1 Applications of Biotechnology

1. Health and medicine
Fighting infectious diseases : Biotechnology is used extensively in the study of
infectious diseases such as SARS (Severe Acute Respiratory Syndrome), and
influenza. As a result more effective pharmaceuticals have been developed.
Development of vaccines and antibiotics : Using technology, microorganisms are
used to develop antibiotics and vaccines to cure diseases. For example, bacteria
Bacillus polymysea is used to produce polymyxin B (antibiotic used to cure urinary
tract infections), fungus Penicillium notatum is used to produce penicillin (used to
cure pneumonia, and many other bacterial infections.)
Treating genetic disorders : Disease can occur when genes become defective due
to mutations. With advancements in biotechnology, in the near future it will be
possible to use gene therapy to replace an abnormal or faulty gene with a normal
copy of the same gene. It may be used to treat ailments such as heart disease,
inherited diseases such as SCID, and Thalassaemia.
In forensic science : A lot of New techniques have been developed such as DNA
fingerprinting, besides having a number of other applications which have facilitated
the speedy identification of the criminals.

2. Environment
Cleaning up and managing the environment : Cleaning up the environment using
living organisms is called bioremediation. Naturally occurring, as well as genetically
modified microorganisms, such as bacteria, fungi and enzymes are used to break
down toxic and hazardous substances present in the environment.

3. Agriculture
Biotechnology has also made possible the production of crops improved disease
resistan; herbicide-toleran and insecticide-resistan. Plants with improved nutritional
value for livestock have also been obtained through biotechnology.
Control of pests : One application of biotechnology is in the control of insect pests.
The genetic make-up of the pest is changed by causing some mutations. These pests
become sterile and do not reproduce further.
294 BIOLOGY
Biotechnology MODULE - 5
Emerging Areas
Manufacturing and bio-processing : With the help of new biological techniques in Biology
it has become possible to grow, the plants that produce compounds for use in
detergents, paints, lubricants and plastics on large scale.
Food and drinks : Biotechnology, has also made the processing of foods and their
products easier. Preservation and storing of food for consumption later has become
easy and cheap with the help of biotechnology. Seedless grapes and seedless citrus
fruits have been developed using biotechnology. Notes
4. Industry
Biotechnology has been used in the industry to produce new products for human
consumption. Food additives have been developed which help in the preservation
of food. Microorganisms are used in the mass production of items such as cheese,
yoghurt, and alcohol.
30.1.2 Industrial Microorganisms and Their Industrial Products
Important microorganisms used in industries include
z yeasts (fungi)
z moulds (fungi)
z bacteria
z filamentous bacteria (actinomycetes)
Microbes are used in the manufacture of several products. Some of these are
z alcohol-containing beverages z yoghurt (curd)
z proteins z antibiotics and monoclonal antibodies
z vitamins, steroids and enzymes z biogas
The progress in gene manipulation and genetic engineering has introduced
the use of cultured mammalian cells and ‘hybridomas’ in the industries.
Hybridomas are created by fusion of cells belonging to organisms of
different species.

30.1.3 Production of Alcohol – Containing Beverages

Fermentation
Fermentation is a process by which carbohydrates such as sugar are
converted into alcohol.
yeast
Glucose ⎯⎯⎯⎯
enzyme
→ Ethyl alcohol + Carbon-dioxide + ATP

Yeast is capable of fermenting sugar to alcohol. Fermentation is an energy

yielding process.
In the mid nineteenth century, Louis Pasteur showed that fermentation by the yeast
Saccharomyces cerevisiae yields beer and buttermilk. Presently yeast is being used

BIOLOGY 295
MODULE - 5 Biotechnology
Emerging Areas
in Biology on a large scale for brewery and
bakery.
Bakers use yeast to leaven (raise) Grape pressing
dough to make bread. Yeast is also Elimination of
contaminants
grown on molasses and is packed and
sold. Yeast is used to raise cakes and Addition of desired
Sterilization organisms
Notes bread while baking. +
Alcoholic beverages are manufactured Yeast addition
by fermentation of sugars by the yeast,
Alcohol production
Saccharomyces cerevisiae. It is called Fermentation from sugars
Brewer’s yeast. The source of
carbohydrate fermented by yeast gives
the beverage its specific flavour. For Excess yeast
example :
– Wine is obtained by fermentation
of grapes. Grapes are fermented Setting vat Fermentation
by S. cerevisiae and its soluble
sugars (glucose and fructose) are
converted into CO2 and ethyl Excess yeast removal
alcohol.
– Fermentation is carried out in large Aging Development of final
wine bouquet
tanks called bioreactors.
– Barley malt is fermented to yield
beer.
Steps taken for fermentation Bottling

(i) Fermenter or tank and the

nutrient medium are sterilised by Fig 30.1 Obtaining wine from grapes by
steam under pressure (autoclave). fermentation by Yeast

(ii) The correct strain of yeast is selected.

(iii) The yeast is inoculated into the medium. Inoculation can be done in two ways:
(a) Yeast can be grown as a layer on the surface of nutrient medium. This
is called support growth system.
(b) Cells or mycelia are suspended in a liquid medium. This is called
suspended growth system.
(iv) Care is taken to maintain the right temperature, pH, oxygen and carbon-dioxide
concentration.
(v) The medium is stirred and left to ferment.
(vi) The sugar in the medium gets fermented by enzymes released by yeast.
(vii) The fermented product is taken out (Fig. 30.1).
296 BIOLOGY
Biotechnology MODULE - 5
Emerging Areas
Some alcohols manufactured by yeast fermentation are : Ethyl alcohol, butanol and in Biology
glycerol. The same method also yields lactic acid and acetic acid (vinegar) by using
specific bacteria.
The yeast extract left after removal of the beverage can be used as animal feed.
It is also a rich source of vitamins.

Notes
INTEXT QUESTIONS 30.1
1. Name three different kinds of microorganisms used in the manufacture of
industrial products.
................................................................................................................
2. Name three products obtained in industries by using microorganisms.
................................................................................................................
3. Name two alcohols produced through fermentation by yeast.
................................................................................................................
4. Name the two methods of inoculation of yeast in the medium.
................................................................................................................
5. Match the items given in columns A with those given in column B.
Column A Column B
1. Bioreactor (a) Butanol
2. Steaming under pressure (b) Fermentation tank
3. Alcohol (c) Autoclave

30.2 YOGHURT AND CHEESE MAKING

At home we add a bit of yoghurt (starter) to milk and it sets. The milk becomes
yoghurt or curd due to the milk curdling enzymes released by the increasing
population of bacteria, Lactobacillus present in the starter. (Table 30.1) On a
commercial scale, making of yoghurt as well as cheese utilises Rennet tablets for
this purpose. Rennin is the milk curdling enzyme obtained from the calf stomach.
However, this method is popular any more.
Whether by bacteria or by “rennin”, when milk is ‘curdled’, milk protein casein,
separates from the liquid which is called whey. Lactobacillus convert lactose in the
milk into lactic acid which lowers the pH. Lowered pH causes souring which is
essential for preservation.
Butter can be made by violently shaking (churning) sour milk. The fat globules
separate and form butter. A starter culture of Streptococcus cremosis, and Leuconostoc
is added to the milk when butter, yoghurt or cheese are made.
BIOLOGY 297
MODULE - 5 Biotechnology
Emerging Areas
in Biology Table 30.1 Fermenting microbes used for dairy products
Fermented product Fermenting microorganism Description

Yoghurt Streptococcus thermophilus Product made from low or

and Lactobacillus bulgarians non-fat milk and stabilisers
like gelatin added.

Butter Lactococcus lactis Cream is incubated till the desired

Notes
acidity is achieved followed by churning,
washing and salting

30.2.1 Microorganisms and antibiotics

In 1928, Alexander Fleming accidentally discovered that one microorganism can
inhibit the growth of another organism. Selman Waksman 1942 coined the term
antibiotic (anti: opposed to, biotic: living organism)

Antibiotic is a substance produced by a microorganism such as bacteria

or fungi which inhibits the growth of another microorganism. Antibiotics
are generally small molecules with a molecular weight less than 2000
Da. They are not enzymes. The antibiotic interferes with the vital
metabolic processes of the pathogenic bacterium and prevents its growth
and reproduction.

Wide-spectrum and narrow-spectrum antibiotics

Modern medicines have found a specific antibiotic for almost every different
pathogen. Streptomyces bacterium yields some of the most widely used antibiotics
like Chloramphenicol, Erythromycin, Tetracycline etc. These are called ‘broad
spectrum antibiotics’ and can be used against more than one kind of pathogenic
bacterium. Streptomycin and Penicillin are narrow spectrum antibiotics used
against few pathogenic bacteria.

Drawbacks of antibiotics
Use of antibiotics was a big step in curing infectious diseases which offered a safe,
sure and relatively inexpensive cure. But even now we find many people suffering
from bacterial diseases. The reasons for this are:
1. Some people are allergic to a particular antibiotic.
2. Some disease causing bacteria undergo mutation and become resistant to a
particular antibiotic to which they were sensitive earlier.

Sources of antibiotics
Some of the common antibiotics and their source organisms are given in table
30.2.

298 BIOLOGY
Biotechnology MODULE - 5
Emerging Areas
Table 30.2 Major antibiotics and their sources in Biology

Antibiotic group Source

Tetracyclin Streptomyces sp
Chlorotetracycline Streptomyces auriefaciens
Chloramphenicol S. venezuelae
Cycloheximide S. griseus Notes
Streptomycin S. griseus
Cephalosporin Cephalosporium acremonium
Penicillin Penicillium chrysogenum

30.3 VACCINATION
In 1790, Edward Jenner observed that milkmaids did not get smallpox as they were
exposed to a milder disease cowpox. Jenner infected a boy with cowpox germs and
after two months with small pox germs. The boy did not get small pox. Jenner
proposed that if mild or attenuated (weakened) germs were introduced into the body,
they would not cause the disease. He gave the term vaccine (latin vacca : cow)
or vaccination, for the weakened germ and its protective inoculation.
Today, the principle of vaccination has been extended to prevent attack of many
diseases. When vaccines are made from attenuated disease causing bacteria, they
are termed as “first generation vaccines”. The “second generation vaccines” have
been produced by genetic engineering or recombinant DNA technology about which
you shall study in the next section. Second generation vaccines for Hepatitis B virus
and Herpes virus are already in use. Vaccines synthesised from chemicals are called
“third generation vaccines”.
30.4 PRODUCTION OF VITAMINS
Vitamins are nutrients required in very small amounts for essential metabolic
reactions in the body. They are produced using biotechnology. Vitamin C was the
first vitamin to be produced during a fermentation process by using bacteria. B12
or cyanocobalamin and B2 or Riboflavin were obtained from liver extract. The
production of B12 involved fermentation by propionic bacteria. In nature B2 is found
in cereals, vegetables and yeast but the yield of B2 can be enhanced hundred to three
hundred fold by using microbes.
30.5 PRODUCTION OF BIOGAS
Biogas is a new conventional source of fuel. Its use can save fossil fuel (coal,
kerosene, and petrol) which are fast getting depleted.
Biogas is made from organic waste including faecal matter. Cowdung or faeces have
lignocellulose. The energy used as fuel comes from methane (CH4). Cowdung forms
the primary source of biogas. In India cowdung is available in plenty in villages and
small scale methane generating plants have been designed.
BIOLOGY 299
MODULE - 5 Biotechnology
Emerging Areas
in Biology Any biodegradable substance (which can be decomposed by bacteria) can be
fermented anaerobically (in the absence of oxygen) by methane-producing
(methanogenic) bacteria. Cowdung or faeces are collected and put in a biogas
digester or fermenter ( a large vessel in which fermentation can take place). A series
of chemical reactions occur in the presence of methanogenic bacteria (CH4
generating bacteria) leading to the production of CH4 and CO2.
While generating biogas, few parameters have to be taken into account. These are
Notes
as follows:
1. Fermentation should be in an anaerobic environment and no free oxygen should
be present.
2. pH in the fermenter should be close to neutral, around 6.8 to 7.6
3. Methanogenic bacteria are to be used for fermentation.
Several kinds of reactors have been designed. One side of the reactor is for input,
that is, for introducing cowdung or faecal matter into the reactor. Whiel other side
of the reactor has an outlet for removal of biogas: The material is left behind is called
slurry. The gas gets stored above the slurry level. Slurry forms excellent manure.
Advantages of biogas
1. Biogas is a fuel used to cook food, and light lamps.
2. Slurry left after biogas production forms a soil conditioner (manure).
3. Biogas is much cheaper than LPG (Liquefied Petroleum Gas) which we
commonly use these days in our houses.

INTEXT QUESTIONS 30.2

1. Name the bacterium responsible for curdling of milk.
................................................................................................................
2. Who discovered antibiotic?
................................................................................................................
3. What do you mean by second generation vaccines?
................................................................................................................
4. Which was the first vitamin to be produced by fermentation?
................................................................................................................
5. Which bacteria cause the production of biogas?
................................................................................................................

30.6 GENETIC ENGINEERING

An engineer fixes a machine to make it work efficiently. Body is like a machine and
genes, the nucleotide sequences in DNA have the information for products to run
this machine. With progress in molecular biology, techniques have been developed
by which a scientist can now manipulate genetic material, replace genes or replace
300 BIOLOGY
Biotechnology MODULE - 5
Emerging Areas
gene products in the body, make identical copies of these genes and store them in in Biology
a gene library. This is called genetic engineering.
30.6.1 Importance of genetic engineering
You know that diabetes mellitus is a genetic disorder. A diabetic patient lacks a
gene which has the information for synthesis of insulin, therefore such a person
cannot secrete insulin. Take another example. A person suffering from Thalassemia
lacks the gene for haemoglobin and can survive only through frequent blood Notes
transfusions. A person suffering from sickle cell anemia has an altered gene whose
product makes the red blood corpuscles abnormal on exposure to oxygen because
they contain faulty haemoglobin.
Humans suffering from genetic disorders such as those cited above have now hope
in genetic engineering. Genetically engineered copies of DNA can be produced and
stored in gene libraries to be used when required.
In the previous sections of this lesson you have studied about the use of microbes
to produce various products on a commercial scale. Currently bacteria are being
genetically manipulated to act as biological factories to produce various kinds of
proteins such as enzymes, hormones, and antibodies through genetic engineering.
Researchers have isolated genes which can be used to produce effective vaccines.
Workers have also developed bacterial strains, through genetic manipulation, which
can degrade harmful environmental pollutants.
30.6.2 Recombinant DNA technology
Genetic engineering may be defined as construction and utilisation of new DNA
molecules that have been engineered by recombinant DNA techniques. The
technique of genetic engineering is in the production of recombinant DNA.
Recombinant DNA, as the name suggests, involves cutting a piece of original DNA
and inserting in its place a different segment of DNA having desred characters. The
recombined or recomposed DNA is then copied multifold inside bacterial cells and
stored in a gene library for use when required. The multiple copies of the gene are
termed cloned DNA or cloned genes.
Causing genetic change by artificially manipulating DNA is genetic
engineering.

Clone is a group of genetically identical cells. Such cells are descendents

of a single cell. When a bacterium with recombinant DNA divides
several times, it provides a clone containing a specific segment of DNA
from another species.
The production of genetically identical individuals or genetic material
from a single cell is called cloning.
Recombinant DNA technology resulted from the two discoveries made while
experimenting with bacteria :
(i) presence of plasmids or extra chromosomal DNA fragments in the bacterial
cell which replicate along with bacterial DNA and can be used as a vector for
carrying foreign DNA.
BIOLOGY 301
MODULE - 5 Biotechnology
Emerging Areas
in Biology (ii) presence of specific restriction enzymes which attack and cut DNA at specific
sites.
30.6.3 Tools and steps in recombinant DNA technology
Recombinant DNA technology is a “cut and paste” technology. Specific nucleotide
sequences are cut from the DNA of humans, other animals or plants and “pasted”
into plasmids. DNA of the plasmid carrying nucleotide sequence of another organism
Notes is the recombinant DNA. It is then inserted into bacteria. Bacteria divide repeatedly
and a clone of bacteria with the recombinant DNA is obtained.
Five requirements for recombinant DNA technology are:
(i) Cell culture (ii) Restriction endonuclease enzyme
(iii) Plasmids (iv) Ligases
(v) Host bacteria
(i) Cell culture : Cultured cells of an animal or plant (or even a bacterium)
carrying the required gene (nucleotide sequence of DNA) in its nucleus.
(ii) The enzyme Restriction endonuclease : Restriction endonucleases cut short
specific DNA sequences. There are many different restriction endonucleases
found in bacteria. Each of these enzymes very specifically recognises a
particular DNA sequence (usually 4 to 6 bases) and cuts it. These enzymes
are the “molecular scissors”. They either cut both the strands at the same place
or at different places so that the two DNA strands hang out at the two ends.
Two cuts at the two ends of a DNA segment releases the cut part as the
restriction fragment. The ends are single stranded and called sticky ends.
Thus a piece of DNA containing a particular gene can be obtained by selecting
a particular restriction endonuclease.
(iii) Plasmids : Plasmids are extra chromosomal DNA molecules in a bacterial cell
which have sequences matching those of the required gene and can be similarly
cut by the same restriction enzymes. Plasmids can readily enter bacteria, yeast
or other speedily reproducing cells.
(iv) DNA ligase : It is an enzyme called ‘joining enzyme’ since it joins two DNA
fragments, both of which have having sticky ends. Ligase is the “molecular
glue”.
(v) Host Bacteria : Host bacteria are the bacteria whose plasmid is used for
carrying foreign DNA.
Sequences of steps in recombinant DNA technology:
1. Specific restriction enzyme is selected.
2. Cell culture with required gene in the cells is obtained.
3. Restriction enzyme cuts the DNA at two ends of the specific gene and a
restriction fragment is obtained (Fig. 30.2 a, c)
4. Same restriction enzyme cuts a matching DNA sequence from a plasmid
(Fig. 30.2 b, d)
302 BIOLOGY
 Biotechnology MODULE - 5
Emerging Areas
5. Ligase joins the restriction fragment in the place vacated by the cut DNA in Biology
segment of the plasmid. The plasmid becomes a recombinant plasmid containing
a foreign DNA fragment (Fig. 30.2 e, f). Its DNA is the recombinant DNA. Since
plasmids can carry foreign DNA, they are called clonal vectors. Bacteriophages
(viruses) can also function as clonal vectors.
6. The recombinant plasmids are then placed with the comptent cells to enter the
bacteria. Notes
7. Bacteria divide. Recombinant plasmids replicate along with bacterial DNA.
8. A large population of bacteria (more than a million) containing recombinant
DNA can be obtained in less than ten hours.
9. Multiple identical copies of DNA fragments inserted into plasmids or bacteriophage
(bacterial virus) are then obtained and preserved in a DNA library.
10. These DNA fragments are the cloned DNA.

Restriction enzyme
makes cuts at specific
sites in all the chromosomes Fragments of
of an organism's cell chromosomal
DNA

Joining of
chromosomal Recombinant plasmids
Same restriction enzyme Cut plasmid containing the DNA
is used to cut plasmids
and plasmid
DNA DNA using fragments

Plasmids inserted into host

cells for amplification

Fig. 30.2 Steps in formation of multiple copies of recombinant DNA for DNA library

INTEXT QUESTIONS 30.3

1. Define genetic engineering.

................................................................................................................
2. What is a clone?
................................................................................................................
3. What do you mean by the term recombinant DNA?
................................................................................................................

BIOLOGY 303
MODULE - 5 Biotechnology
Emerging Areas
in Biology 4. Where are plasmids found?
................................................................................................................
5. Why are restriction enzymes called “molecular scissors”?
................................................................................................................
6. Name the enzyme which joins DNA fragments.
................................................................................................................
Notes 7. What is a clonal vector?
................................................................................................................
8. What do you mean by transgenic organism?
................................................................................................................

30.6.4 Applications of genetic engineering

1. Protein manufacture
You would recall from earlier section of this lesson that bacteria and yeasts have been
used for centuries to produce cheese, and alcohol, and more recently antibiotics.
Currently, plasmids in bioengineered bacteria carry some human genes and these genes
are expressed to give large quantities of human proteins which are clinically useful.
The development of recombinant DNA technology and gene cloning has generated
a new industry for manufacturing proteins. Earlier valuable proteins could be obtained
from eukaryotes in small amounts and at heavy expense, but now these can be
produced in large quantities. For example, until sometime back, growth hormone was
available only in tiny amounts and was extremely expensive as it had to be extracted
from endocrine glands of certain animals. Today, it can be made available in large
quantities through recombinant DNA technology. In 1982 production of human insulin
became the first commercial success of recombinant DNA technology.
There are several proteins of therapeutic (medical) value which are available now
through recombinant DNA technology. These are cloned human gene products
approved for use or being developed. Following table 30.3 gives the names and uses
of some of these:
Table 30.3 The names of proteins and their uses
Protein Used in
1. Insulin Diabetes mellitus
2. Growth hormone Pituitary dwarfism
3. Erythropoietin Anaemia
4. Interferons viral infections
5. Interleukin 2 Cancer
6. Clotting factor VIII Haemophilia A
7. Clotting factor IX Haemophilia B
8. Monoclonal antibodies Infectious diseases
9. Tissue Plasminogen factor Heart attack

304 BIOLOGY
Biotechnology MODULE - 5
Emerging Areas
2. Enzymes have also been produced from cloned genes. The following table 30.4 in Biology
gives the names of such enzymes and their uses:
Table 30.4 The names of enzymes and their uses
Enzymes Used in
Proteases manufacture of detergents, meat tenderisers.
Amylases manufacture of beer, bread and textiles
Glucoisomerases to make corn syrup, which is sweeter than sucrose Notes
and used to flavour soft drinks
Enzymes are fragile and have to be entrapped in gel and encapsulated in small
artificial cells.
3. Antibiotics
Since the discovery of Penicillin in 1920s, more than 6000 antibiotics have been
isolated from various microorganisms and have resulted in an enormous improvement
in human health. Research is in progress to genetically engineer biosynthetic
pathways for the synthesis of antibiotics. Novel antibiotics have also been obtained
through genetic manipulation.
4. Vaccines
Bioengineered vaccines have been developed for rabies and hepatitis B. A gene for
the antigen protein is inserted into a plasmid and the bacteria containing recombinant
DNA then generate large quantities of the protein. The protein is added to the
vaccine. Antibodies immediately form against the antigen when vaccinated.

INTEXT QUESTIONS 30.4

1. Name any two proteins and ,two enzymes obtained by recombinant DNA
technology.
(i) ............................................ (ii) ..............................................
2. How is recombinant DNA technology useful for pharmaceutical companies?
................................................................................................................
3. Name any two diseases for which bioengineered vaccines have already been
developed.
(i) ............................................ (ii) ..............................................

30.8 TRANSGENE AND TRANSGENIC

Genetic engineering has made possible production of organisms of one species
carrying genes of another species. The foreign gene is called a transgene. The plant
or animal carrying it is termed as transgenic.
Genetically engineered organisms carrying foreign genes are termed
transgenics.

BIOLOGY 305
MODULE - 5 Biotechnology
Emerging Areas
in Biology 1. Usefulness of transgenic organisms
1. For a better yield desirable traits can be introduced or increased in agricultural
plants and domestic animals, especially the cattle.
2. Valuable products can be produced by transgenic plants and animals.
3. Transgenic plants and animals can be used for investigating biological processes
such as gene expression.
Notes
2. Methodology for production of transgenics
There are two methods which are mostly used for generating transgenics:
(i) Microinjection of foreign DNA into pronuclei of fertilised eggs.
(ii) Retroviral vector method. Infection of pre-implantation embryos with
retroviruses carrying foreign DNA.
The first method has the following steps:
(i) Collection of oocytes from the animal killed in slaughter house or surgically
removed from female parent.
(ii) In-vitro maturation of oocytes.
(iii) In-vitro fertilisation with male semen.
(iv) Eggs (oocytes) to be centrifuged to concentrate yolk which in normal cells
prevents male pronuclei from being seen under the dissecting microscope.
(v) Microinjection of “input DNA” into male pronuclei (Fig. 30.3). Usually
hundred to thousand copies of the gene of interest are injected.
(vi) In-vitro development of embryos.
(vii) Non-surgical implantation of one embryo into a recepient foster mother.
(viii) Screening of DNA of the offspring of foster mother for presence of transgenes.
(ix) Offspring with the transgenes are the transgenic organisms.

Fig. 30.3 Microinjection of input DNA into male pronucleus

In the second method called the retroviral vector method, DNA required to be
transferred into the female is introduced through the retrovirus which infects the
cells of an early stage embryo before implantation into a receptive female.
306 BIOLOGY
Biotechnology MODULE - 5
Emerging Areas
Transgenic plants in Biology

By recombinant DNA techniques, plant breeders can now directly modify the DNA
of plants. They can add genes from other species to the plant. The most popular
method for doing this is to produce a transgenic plant by the use of Agrobacterium
tumefaciens. It is a soil bacterium which has a natural “genetic engineering” system.
It has a plasmid which can be inserted into plant cells. Agrobacterium tumefaciens
causes galls (tumours) (Fig. 30.4) in several plants. The information for production Notes
of galls is present on a plasmid, (Ti) in the bacterium. A segment of DNA from the
plasmid can be transferred into plant cell. In the Ti plasmid, gall forming genes can
be removed and substituted by desired genes. The plasmid can then be used to
transform plant cells. Such foreign genes in the chromosomes of transformed plant
cells can be expressed normally (Fig. 30.4).

Fig. 30.4 Gall caused on turnips by bacteria carrying T1 plasmid

Examples of transgenic plants

(i) Cotton which can resist attack by worms.
(ii) Corn and soyabean which are more tolerant to drought and pesticides.
Transgenic plants can also serve as factories to produce medically and commercially
useful proteins. Serum albumin is used in preparations given to patients with burn
injuries and others for replacement of body fluid. Genetically altered potato and
tobacco plants can yield serum albumin.

BIOLOGY 307
MODULE - 5 Biotechnology
Emerging Areas
in Biology Transgenic animals
Mice : It is difficult to generate transgenic animals as animal cells do not accept
plasmids. Transgenic mice are, however, routinely produced in the laboratories
throughout the world by microinjecting foreign DNA. Gene for growth hormone
from rats was microinjected into mouse eggs. These mice grew larger than their
litter mates. This was because rat gene got integrated into mouse DNA and was
Notes being expressed. (Fig. 30.5).

Fig. 30.5 Transgenic mouse compared to normal mouse

Goats : Transgenic goats have been developed from a fertilised egg injected with
recombinant DNA consisting of goat gene sequences spliced with human genes for
tPA (tissue plasminogen activator). Goat milk contains this factor which dissolves
blood clots. This has proved very useful for heart attack (coronary thrombosis) and
stroke patients.
Cattle : Transgenic livestock have the potential to produce large quantities of drugs
faster and at much cheaper rates than from bacteria which have to be cultured in
huge industrial vessels.
Chinese hamster : Blood clotting factor VIII genes have been inserted in chinese
hamster ovary cells. This factor saves the patients suffering from haemophilia A.
Blood clotting factor has also been generated through recombinant DNA technology
in Chinese hamster. This eliminates the need to get it from human blood alongwith
remov of the the risk of transmitting AIDS.

30.8.1 Bioremediation (remedy through organisms)

Genetically engineered bacteria can clean up pollutants from the environment. This
is called Bioremediation. The transformed bacteria metabolically breakdown toxic
pollutants into harmless compounds.
Mercury resistant bacteria process metallic mercury (which damages the nervous
system) into a nontoxic compound.
308 BIOLOGY
Biotechnology MODULE - 5
Emerging Areas
in Biology

INTEXT QUESTIONS 30.5

1. Define the term transgenic.
................................................................................................................
2. Name the gall producing bacterium and the plasmid which can be conveniently
used to produce transgenics. Notes
................................................................................................................
3. What is bioremediation?
................................................................................................................

30.9 HUMAN GENE THERAPY

Many people are born with and suffer from diseases such as sickle cell anaemia,
haemophilia, severe combined immuno deficiency (SCID), and colour blindness.
Such diseases are caused due to genetic defects. These genetic defects are hereditary.
It has been estimated that around 2000 children in India alone are born every day
with genetic disorders. Let us learn about the methods of removal and correction
of genetic defects.
30.9.1 Gene function
Genes play a number of different roles in the proper functioning of an organism
by (a) controlling synthesis of enzymes involved in biochemical reactions, (b)
regulating their synthesis such that the right enzyme appears at the right time.
Sometimes genes may not function properly due to some irregularity or defect in
their structure. This may lead to genetic disorders. A defective gene may appear
in an individual in the following two ways:
(i) Certain defective genes are inherited and the defect runs in the family. For
example : Colour blindness, haemophilia, sickle cell anaemia.
(ii) A gene becomes defective all of a sudden due to mutation during early
development. For example : Albinism (non-heritable).
A gene mutation may alter the synthesis or activity of an enzyme needed for the
normal completion of chemical reactions or for the normal functioning of an
organism.
The consequences are :
(i) accumulation of the metabolic substances that are toxic, or
(ii) deficiency of a compound that is important for normal cell functioning.
There are mutations that can lead to disorders in any part of the body, including
muscles, eyes, liver, bones, kidneys, nerves, and blood system. Under normal
conditions, genes work in total harmony completing their specific job of converting
a raw material into a finished product, by synthesising the specific enzyme.

BIOLOGY 309
MODULE - 5 Biotechnology
Emerging Areas
in Biology Normal gene functioning

Gene A Gene B Gene C

¾ ¾ ¾
Enzyme A Enzyme B Enzyme C
¾ ¾ ¾
Substrate Product A Product B End Product
Notes
¾
(Intermediate Products)
Defective Gene Functioning
Sometimes, absence of a gene or defect in a single gene may result in defective
metabolism and a desired product may never be formed, rather a harmful product
may be obtained.

Gene A Gene B (defective or absent)

¾ ¾
Enzyme A No Enzyme
¾ ¾
Substrate Product A No Product B No End Product

The absence of enzyme B results in accumulation of unuitilised product A and end

product is not produced.
You will be alaimed to know that a number of human disorders are caused due to
single gene defects. Following- table 30.5 gives an idea of some such diseases, caused
due to the missing or defective gene products, and the symptoms, of the diseases.
Table 30.5 Some Common Single Gene Defects
Disease Gene Product Symptoms
(i) Severe Combined Absence of adenosine Loss of immunity,
Immuno Deficiency deaminase T lymphocytes and B
syndrome (SCID) lymphocytes in low count.
(ii) Haemophilia Absence of blood clotting Defective blood clotting,
factor VIII chronic bleeding in joints.
(iii) Sickle Cell defective β chain of damage to heart,
anaemia haemoglobin spleen, kidney, liver and brain
(iv) Phenylketonuria (PKU) Accumulation of Severe mental .retardation,
aminoacid phenyl albinism (lack of pigmentation)
alanine in blood
30.9.2 Gene therapy
Most of the genetic disorders may result in serious complications, health problems
and untimely death. Techniques are being developed to replace defective genes or

310 BIOLOGY
Biotechnology MODULE - 5
Emerging Areas
manipulate them to remove the genetic disorder. Such treatment is called Gene in Biology
Therapy.
Gene Therapy thus may be defined as a technique in which a patient (sufferer) is
given healthy genes to replace the defective ones inherited from the parents, or to
enhance the action/reaction of the genes they already have.
Replacement and alteration of defective gene is called
Gene therapy. Notes
Human gene therapy in a broad sense is the addition of functional normal gene or
genes to the genetic material contained in the human cell. This is with the aim of
correcting an inherited defect.
The ultimate goal is to let ‘protein assembling unit’ of the cell make desired proteins
needed for the normal functioning of an individual. It is like supplying a patient with
the necessary gene product formed within the cells by the patient’s own body.

INTEXT QUESTIONS 30.6

1. What causes the alteration of normal functioning of a gene ?
................................................................................................................
2. Name two single gene disorders in human beings.
................................................................................................................
3. State which cells have a low count in Severe Combined Immuno Deficiency
(SCID).
................................................................................................................
4. Define gene therapy.
................................................................................................................

30.9.3 Approach to human gene therapy

There are two basic approaches to human gene therapy:

(i) Somatic gene therapy, and

(ii) Germ-line gene therapy.

(i) Somatic (body cell) gene therapy

Once a normal gene has been cloned, it can be used to correct a genetic defect.
Body cells are targeted for genetic transformation (defective gene transformed to
normal). This approach helps in the correction of a genetic defect confined to a
specific organ or tissue.

BIOLOGY 311
MODULE - 5 Biotechnology
Emerging Areas
in Biology (ii) Germ line (sex cell) gene therapy
In this approach, cells of germinal epithelium or gametes or zygote are genetically
modified to create an individual that will carry remedial gene(s) in the following
generation. Presently all research on human gene therapy is directed towards
correcting gene defects in somatic cells (non-sex cells). Somatic gene therapy can
be grouped under the broad categories of :
Notes (a) Ex-vivo gene therapy,
(b) In-vivo gene therapy, and
(c) Antisense gene therapy.
(a) Ex-vivo (outside the body) gene therapy:
This type of therapy usually involves the use of cells (with defective gene) taken
from the patient. After the gene alteration when the same cells are transfused
(transferred back), no immunological response takes place. The steps involved in
the procedure are :
1. Isolating the cells with gene defects from a patient.
2. Growing the isolated cells in culture.
3. Altering the genome of the isolated cells with remedial gene.
4. Selecting, growing and testing the altered cells.
5. Transplanting or transfusing the altered cells back into the patient (Fig. 30.6).

Fig. 30.6 Steps in the Ex-vivo gene therapy

Vectors such as retrovirus is used for the integration of normal gene in the host
genome. Stem cells of the bone marrow are continuously producing new cells. If
such cells are taken and put back after alteration, to remove genetic defects, these

312 BIOLOGY
Biotechnology MODULE - 5
Emerging Areas
cells can divide and differentiate into various important cells such as B cells and in Biology
T cells, macrophages, red blood cells, platelets and bone cells.
Genetically engineered stem cells on transplanting back into the patient’s body result
in a continuous supply of the required gene product. The technique can be used
in the treatment of the following genetic disorders:
(i) Severe Combined Immuno Deficiency (SCID).
(ii) Sickle cell anaemia. Notes
(iii) Thalassaemia
(iv) Certain tumours.
(b) In-vivo (within the body) gene therapy
This type of gene therapy includes direct delivery of a remedial gene into the cells
of a particular tissue of the patient. Adenovirus, a double stranded DNA virus, is
being used as a vehicle for transferring the remedial gene, (Fig. 30.7). The viruses
used are weak enough to cause any disease. The tissue specific virus integrates with
the host genome and can only infect dividing cells and not the other healthy cells.
This therapy may become useful in the treatment of cancer, Alzheimer’s disease and
Parkinsons’s disease.

Fig. 30.7 Steps in In-vivo gene therapy

(c) Antisense Therapy

You have learnt the steps involved in protein synthesis, transcription and translation.
This therapy is designed to prevent or lower the expression of specific gene thus
limiting the amount of translation of protein from the over producing gene.

BIOLOGY 313
MODULE - 5 Biotechnology
Emerging Areas
in Biology This therapy involves the introduction of nucleic acid sequence that is complementary
to all or part of m-RNA (messenger RNA formed in the target cell) into the cells
overproducing the gene product (Fig. 30.8). This therapy will prove useful in certain
human genetic diseases and cancers where too much of a gene product or its
continuous presence changes the normal functioning of the cell. It has been tried
for treatment of malignant glioma or brain tumour. Tlaur-save tomato with a long
shelp life has been produced by this technique.
Notes

Fig. 30.8 Antisense gene therapy

Antisense gene therapy

An expressible gene is cloned in its reverse (order) orientation and is introduced
into a cell. The RNA thus transcribed forms the antisense sequence of normal
mRNA. When the antisense RNA base pairs with the mRNA, translation of the
mRNA is prevented. The antisense RNA does not contain signals for the initiation
of translation.
30.9.4 Gene Therapy—How Far?
The possibility of being able to genetically engineer humans has always been the
aim of certain researchers. Somatic cell gene therapy is in its early stages of
becoming a mode of treatment for a number of genetic and other diseases such as
(i) AIDS
(ii) Haemophilia
(iii) Atherosclerosis
(iv) Leukaemia
(v) Lung cancer
(vi) Severe Combined Immuno Deficiency-SCID
Germ line gene therapy is not being currently practised. Any manipulation in the
genetic material of sex cells may introduce unforeseen characters with alarming

314 BIOLOGY
Biotechnology MODULE - 5
Emerging Areas
consequences in the offspring. Gene therapy is thus not only risky but an expensive in Biology
and time consuming technique available only in few advanced countries.
Gene therapy has the following limitations
(i) Research is limited to only somatic cells. Treated individuals can not pass the
genetic improvement to offspring.
(ii) There could be a possibility of random integration of DNA into a human
chromosome leading to inactivation or activation of a normal gene. This may Notes
result in either deficiency of an important enzyme or uncontrolled cell division
leading to cancerous growth.
(iii) The Procedure Planned has to meet strict safety standards in animal trials.
(iv) Target diseases have to be limited to those that involve known defects in a
single gene, and the normal gene must be cloned and be available for transplant.

INTEXT QUESTIONS 30.7

1. State the two approaches to human gene therapy.
................................................................................................................
2. Name the three categories of somatic cell gene therapy.
(a) ............................ (b) ............................. (c) .............................
3. Name any two genetic diseases that can be treated by somatic gene therapy.
(i) .................................................. (ii) ....................................................
4. What is the direct delivery of the corrected gene into the tissue of the patient
by the use of Adenovirus called?
................................................................................................................

WHAT YOU HAVE LEARNT

z Biotechnology is the application of scientific knowledge by industries that

produce biological products like food supplements, enzymes, and drugs.
z Yeasts (Fungi), moulds (Fungi) and bacteria are important microorganisms used
in industries.
z Yoghurt, alcoholic beverages, antibiotics, vaccines and biogas can be obtained
on a commercial scale by the use of microorganisms.
z Fermentation is a process by which sugar is converted into alcohol and CO2
by yeast.
z Fermentation by the yeast Saccharomyces yields beer and that by Lactobacillus,
yields butter milk.
BIOLOGY 315
MODULE - 5 Biotechnology
Emerging Areas
in Biology z In fermentation on large scale, bioreactor and nutrient medium are sterilised by
autoclaving. Yeast is inoculated into the medium by support growth system or
suspended growth system.
z Yoghurt is made from milk set by a bacterium Lactobacillus. Rennet tablets made
from calf stomach or ficin from sap of fig trees are used for setting milk into
curd.
Notes z Bacteria also yield antibiotics as was discovered by Alexander Fleming.
Waksman gave the term antibiotic.
z An antibiotic attacks and terminates a vital step in the metabolic pathway of the
pathogenic bacterium which then stops growing.
z Vaccines are prepared (a) from weakened or attenuated germs (first generation
vaccines), (b) by recombinant DNA technology (second generation vaccines),
or (c) synthetically (third generation vaccines).
z Vitamins may also be generated through fermentation.
z Biogas is made by the action of methanogenic bacteria on waste matter such
as the faeces of humans or of cattle.
z Genetic engineering is defined as construction and use of DNA molecules
engineered by recombinant DNA technology.
z Recombinant DNA (r-DNA) technology resulted from the discovery of
(i) plasmids, and (ii) restriction enzymes.
z Tools of r-DNA technology are cell culture, restriction enzymes, plasmids, ligase
and host bacteria.
z Recombinant DNA technology may be used to obtain proteins commercially
such as insulin, clotting factors, monoclonal antibodies, enzymes, antibodies and
vaccines.
z Genetically engineered organisms carrying foreign genes are called transgenics.
z Transgenic plants may be obtained by using the T1 plasmid of the bacterium
Agrobacterium tumefaciens.
z Transgenic animals are produced by microinjection of foreign DNA into fertilised
eggs or by using retrovirus for introducing foreign DNA into early embryonic
stages.
z Genetically engineered bacteria can clean up pollutants from environment. This
is called bioremediation.
z A mutated gene in a cell may result in some form of genetic disorder/disease.
Sickle cell anaemia, Haemophilia, SCID are some single gene human disorders.
z Addition of a normal functioning gene to the defective cells to correct the genetic
disease is called gene therapy.
z Treatment which is applied to body cells excluding germ line cells is called
somatic gene therapy.

316 BIOLOGY
Biotechnology MODULE - 5
Emerging Areas
z There are three main therapeutic approaches to gene therapy : (a) ex-vivo gene in Biology
therapy, (b) in-vivo gene therapy, and (c) antisense gene therapy.
z Ex-vivo gene therapy includes addition of corrected genes through retroviral
cloning vectors.
z In-vivo gene therapy includes direct delivery of corrected genes into the tissues
by use of adenovirus.
z Antisense therapy is designed to prevent or lower the expression of gene in order Notes
to have less accumulation of a gene product.
z Gene therapy has certain limitations such as (i) somatic cell gene therapy can
not rectify the defect in subsequent generation, (ii) random integration of DNA
from outside may interfere with normal gene, (iii) strict safety standards are to
be maintained, (iv) proper clones of requisite genes have to be available.

TERMINAL EXERCISES
1. Define biotechnology.
2. How are alcoholic beverages produced by fermentation? Mention the steps in
the process.
3. How can you make cheese and curd on a large scale?
4. What are antibiotics? Name five antibiotics and their sources.
5. How are different generations of vaccines produced?
6. Describe the steps in the production of biogas and mention the precautions
to be taken.
7. Enumerate in a sequence the steps in recombinant DNA technology.
8. Describe the uses of genetic engineering.
9. How can a transgenic animal be obtained?
10. Write a note on bioremediation.
11. Define the term gene therapy. Under what condition does it become necessary
to opt for such a therapy ?
12. What is meant by human somatic gene therapy? How does it differ from the
germ line gene therapy? Which of the two have been successful so far and why?
13. Discuss in brief the different types of somatic gene therapy.

ANSWERS TO INTEXT QUESTIONS

30.1 1. Fungi, yeast, bacteria
2. Alcohol/antibiotics/curd/cheese/vitamins/vaccines/biogas (any three)
3. Ethanol/Butanol/Glycerol (any two)
BIOLOGY 317
MODULE - 5 Biotechnology
Emerging Areas
in Biology 4. Support growth system and suspended growth system
5. 1-b, 2-c, 3-a
30.2 1. Lactobacillus
2. Alexander Fleming
3. Vaccines produced by the use of recombinant DNA technology
4. Vitamin C
Notes
5. Methanogenic bacteria
30.3 1. Construction and use of novel DNA molecules obtained by recombinant
DNA technology.
2. Clone is a collection of genetically identical cells obtained by asexual
division of a cell.
3. When a fragment of foreign DNA is inserted in DNA of a phage or plasmid,
DNA of the latter is called r-DNA.
4. In bacteria
5. Because they can cut specific sequences of DNA. (6) Ligase.
7. A phage or plamid which can carry foreign DNA and divide along with
the bacterium whose part it is.
30.4 1. (i) Insulin, Growth hormone (ii) Proteases, Amylases
2. Antibiotics, vaccines and proteins of clinical value can be manufactured
abundantly.
3. Rabies and hepatitis B
30.5 1. An organism containing foreign DNA in its genome
2. Agrobacterium tumefaciens and T1 plasmid.
3. Bioremediation is removal of pollutants in the environment by the use of
genetically engineered bacteria.
30.6 1. Mutation
2. Haemophilia, Sickle cell anaemia, SCID (Any two)
3. B-cells and T-cells
4. Replacement and alteration of defective gene is called gene therapy.
30.7 1. Somatic and Germ line cells
2. In-vivo gene therapy, Ex-vivo gene therapy and Anti-sense gene therapy
3. Thalassamia, certain types of cancer
4. In-vivo gene therapy

318 BIOLOGY