Scribd
Upload
53 views3 pages

Ccna Command Ref

This document contains configuration examples for various router and switch tasks: 1) It shows how to set passwords for auxiliary and VTY lines on a router for console and telnet access. 2) It outlines VTP, VLAN, and port configuration steps on a switch to set up VLANs. 3) It provides an example of switch redundancy configuration using STP root bridge settings. 4) It includes configurations for switch hostname, login passwords, banners, interface IP addressing, and default gateway settings.

Uploaded by

adahech
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
53 views3 pages

Ccna Command Ref

This document contains configuration examples for various router and switch tasks: 1) It shows how to set passwords for auxiliary and VTY lines on a router for console and telnet access. 2) It outlines VTP, VLAN, and port configuration steps on a switch to set up VLANs. 3) It provides an example of switch redundancy configuration using STP root bridge settings. 4) It includes configurations for switch hostname, login passwords, banners, interface IP addressing, and default gateway settings.

Uploaded by

adahech
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

User EXEC Password Protection

Router(config)# line aux 0


Router(config-line)# password console_password
Router(config-line)# exit
To set up a telnet password for your VTYs, use this configuration:
IOS(config)# line vty 0 15
IOS(config-line)# password telnet_password
IOS(config-line)# login

IOS(config)# username name secret|password password


IOS(config)# line vty 0 15
IOS(config-line)# login local

Vlan
Your VTP configuration is done from Global Configuration mode on the 2960:
switch(config)# vtp domain VTP_domain_name
switch(config)# vtp mode server|client|transparent
switch(config)# vtp password VTP_password
switch(config)# vtp pruning

VLAN configuration
switch# vlan database
switch(vlan)# vlan VLAN_# [name VLAN_name]
or
switch(config)# vlan VLAN_#
switch(config-vlan)# name VLAN_name

Switch(config)#vlan 10
Switch(config-vlan)#name Engineering
Switch(config-vlan)#exit

Assigning Ports to VLANs


Switch(config)#interface fastethernet 0/1
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 10

Switches and Redundancy

Switch-A(config)# spanning-tree mode rapid-pvst


Switch-A(config)# spanning-tree vlan 1 root primary
Switch-A(config)# spanning-tree vlan 2 root secondary
Switch-B’s configuration would look like this:
Switch-B(config)# spanning-tree mode rapid-pvst
Switch-B(config)# spanning-tree vlan 2 root primary
Switch-B(config)# spanning-tree vlan 1 root secondary
IP Address and Default Gateway

Switch(config)# hostname Switch-A


Switch-A(config)# line console 0
Switch-A(config-line)# exec-timeout 5 0
Switch-A(config-line)# password consolepass123
Switch-A(config)# exit
Switch-A(config)# line vty 0 15
Switch-A(config-line)# password telnetpass123
Switch-A(config-line)# exec-timeout 5 0Switch-A(config-line)# login

Switch-A(config-line)# exit
Switch-A(config)# enable secret secretpass123
Switch-A(config)# service password-encryption
Switch-A(config)# banner motd $
This is a private system and only authorized individuals
are allowed!
All others will be prosecuted to the fullest extent of the law!
$
Switch-A(config)# interface vlan 1
Switch-A(config-vlan)# ip address 10.0.1.2 255.255.255.0
Switch-A(config-vlan)# exit
Switch-A(config)# ip default-gateway 10.0.1.1
Switch-A(config)# end
Switch-A# copy running-config startup-config

Router-on-a-Stick Example Configuration


Router(config)# interface fastethernet0/0
Router(config-if)# duplex full
Router(config-if)# no shutdown

Router(config-if)# exit
Router(config)# interface fastethernet0/0.1
Router(config-subif)# encapsulation dot1q 10
Router(config-subif)# ip address 172.16.1.1 255.255.255.0
Router(config-subif)# exit
Router(config)# interface fastethernet0/0.2
Router(config-subif)# encapsulation dot1q 20
Router(config-subif)# ip address 172.16.2.1 255.255.255.0
Router(config-subif)# exit

Commands used to set up a DHCP server

Router(config)# service dhcp


Router(config)# ip dhcp excluded-address 192.168.1.1 192.168.1.99
Router(config)# ip dhcp excluded-address 192.168.1.200 192.168.1.254
Router(config)# ip dhcp pool sdm-pool1
Router(dhcp-config)# import all
Router(dhcp-config)# network 192.168.1.0 255.255.255.0
Router(dhcp-config)# dns-server 65.32.1.65 4.2.2.2
Router(dhcp-config)# default-router 192.168.1.1

Default Route Configuration


Router(config)# ip route 0.0.0.0 0.0.0.0 IP_address_of_next_hop_neighbor [administrative_distance] [permanent]
or
Router(config)# ip route 0.0.0.0 0.0.0.0
interface_to_exit
[administrative_distance] [permanent]

You might also like