Important Notes:

• Copyright by Bureau Expo Dubai 2020 (EX20). All rights reserved. This
document may not, in whole or in part, be reproduced, stored, transmitted or
distributed in any form or by any means, whether electronic, mechanical, by
1 2 3 photocopy, recording or otherwise, without the prior written permission of EX20.
Except where otherwise expressly agreed in writing by EX20, EX20 shall have
H no responsibility or liability for any loss (direct, consequential or otherwise)
250 250 which may arise from reliance on or use of this document or the information
GRADE SLAB contained therein.
• Where dimensions are not given, drawings must not be scaled and the matter
250 AS/PLAN should be referred back to John R Harris & Partner's.
STEEL COLUMN
SSL +25.230 • This drawing should be read in conjunction with all other project information,
T16@150 T16@150 GRADE SLAB produced by John R Harris & Partner's and others. In the event of any conflict
between the information contained on this drawing and in any other project
AS/PLAN
GRADE SLAB document, drawings, specifications, schedules etc. the matter must be referred
T12@150 T12@150 +25.230 back to John R Harris & Partner's for clarification.
AS/PLAN
• All dimensions and conditions are to be checked on site by the contractor prior
250

700
+25.080 to preparing designs, shop drawings, calculations etc. or commencing any

1480
250 work.
T12@150 +25.080 +25.080 • The contractor is responsible for checking that there is no conflict between site
SSL +24.530 dimensions and drawn dimensions.
• This drawing’s should be read in conjunction with other relevant architectural,

550
RC WALL AS PER PEDESTAL AS interior design, structural, fire safety, mechanical and electrical drawings and all
200

relevant sections of the project specifications.

550
DETAIL PER DETAIL • The contractor shall submit full shop / setting out drawing for approval (based
T12@150
STB AS PER on site dimensions) prior to commencement of any site works, placing of
SSL +24.530
orders, manufacture of fittings, fixtures and components.
DETAIL

200
T12@150 • Approved drawings from consultants do not relief the contractors from his

200
contractual obligations or that of adhering to requirements in accordance with
latest edition of Fire and Life Safety Code of practice and the International
Codes & Standards referred to within where applicable.
STB AS/ DETTAIL • Safety, Health and Environment Information: brief details on the identified
hazard symbol referencing the unusual residual hazards / risks are listed
T12@150 WATERPROOFING AS PER GENERAL NOTE
SECTION
above.
200 THK. SOLID 50 THK. P.C.C. BLINDING OVER

S1 1 : 25
BLOCK WORK

FOOTING AS
1000 GUAGE POLYTHENE SHEET TYP. OVER
COMPACTED SUB-BASE TO 95% MDD OMC SOLID BLOCK
DO NOT SCALE THIS DRAWING.

PER SCHEDULE WORK

SECTION
S2 1 : 25
REINF. AS/FOOTING SCHEDULE

SECTION S3
S3 1 : 25 N

Makka
h

3 4
J
GRADE SLAB
AS/PLAN General Notes
250
1130 600
+25.230 GRADE SLAB STEEL COLUMN
+25.330 AS/PLAN

100
+25.080 +25.230
700
550

+24.530
200

T16@150 T16@150 T16@150 T16@150

1500
LIFT PIT AS/PEDESTAL
DETAIL
T12@150 (TYP)
50 THK. P.C.C. BLINDING OVER
1000 GUAGE POLYTHENE SHEET TYP. OVER 450 REINF. AS/FOOTING SCHEDULE 650
COMPACTED SUB-BASE TO 95% MDD OMC

SECTION
FOUNDATION WATERPROOFING AS

800
AS/DETAIL PER GENERAL NOTE

S4 1 : 25
200 THK. SOLID
BLOCK WORK

REINF. AS/FOOTING SCHEDULE WATERPROOFING AS PER GENERAL NOTE

50 THK. PROTECTION SCREED OVER 50 THK. P.C.C. BLINDING OVER No Description

SECTION
1000 GUAGE POLYTHENE SHEET TYP. OVER SAFETY, HEALTH AND ENVIRONMENT INFORMATION
COMPACTED SUB-BASE TO 95% MDD OMC Brief details on the identified hazard symbol referencing the unusual residual

S5 1 : 25
hazards / risks are listed above.

250

1 ISSUED FOR CONSTRUCTION AB AB 23/01/2020

0 DETAIL DESIGN SUBMISSION AB AB 08/01/2020
Rev Description Apvr Chk'd Date
+24.830 Client

130 140
1250

T16@150

Programme / Programme Management Consultant

300 300
+23.980
200

Architectural Consultant
REINF. AS/PLAN
870

T12@175

Project Title
T16@150 T16@150
USA PAVILION EXPO 2020
500

1900

Enter address here

T12@175 T12@175
Drawing Title

1000

T16@150
FOUNDATION SECTIONS
BOTH WAYS T20@125
500 BOTH WAYS 500
+21.880
400

50 THK. PROTECTION SCREED OVER T20@125

WATERPROOFING AS PER GENERAL NOTE
BOTH WAYS

SECTION 50 THK. P.C.C. BLINDING OVER

Approved Seal Date

S6 1 : 25
1000 GUAGE POLYTHENE SHEET TYP. OVER
COMPACTED SUB-BASE TO 95% MDD OMC
AB
Designed Drawn Checked

IA AB
Model File Ref: Scale A1(594x841) Revision No
10101-MDL-S605282-AR-900001 1 : 25 1
Drawing No

6324-USA-ST-DG-ST-502