Scribd
Upload
718 views3 pages

Surface Kill Sheet 1 Answers

The document provides well data and parameters for preparing a kill sheet, including hole dimensions, internal/annular capacities, LOT, pump details, and shut in data. It then lists the answers to questions calculated from the data, such as the maximum allowable mud weight prior to a kick, MAASP prior to kick, strokes to different points in the wellbore, kill mud weight, initial/final circulating pressures, safety margin, and MAASP after killing the well.

Uploaded by

Farouq Eng
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
718 views3 pages

Surface Kill Sheet 1 Answers

The document provides well data and parameters for preparing a kill sheet, including hole dimensions, internal/annular capacities, LOT, pump details, and shut in data. It then lists the answers to questions calculated from the data, such as the maximum allowable mud weight prior to a kick, MAASP prior to kick, strokes to different points in the wellbore, kill mud weight, initial/final circulating pressures, safety margin, and MAASP after killing the well.

Uploaded by

Farouq Eng
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

SURFACE

KILL SHEET 1

ANSWERS
Surface Kill Sheet 1

Use the following data to prepare a kill sheet and answer the questions.

WELL DATA

Hole Dimensions
Depth (MD/TVD) 12,090 ft
9 5/8" Casing shoe (MD/TVD) 8,800 ft
Hole size 8 1/2 in
Current mud weight 13.5 ppg

Internal Capacities
6 1/2" Drill collars (length 900 ft) 0.00768 bbl/ft
5" Drill pipe - capacity 0.01776 bbl/ft
5" Drill pipe - metal displacement 0.00650 bbl/ft
5" Drill pipe- closed end displacement 0.02426 bbl/ft

Annular Capacities
Open hole / Drill collar 0.0292 bbl/ft
Open hole / Drill pipe 0.0459 bbl/ft
Casing / Drill pipe 0.0505 bbl/ft

L.O.T.
Mud weight 12 ppg
Leak off pressure 2700 psi

Pump Details
Pump output 0.109 bbl/stk
SCR (riser) at 40 SPM 550 psi

Shut in data
SIDPP 200 psi
SICP 600 psi
Pit gain 15 bbls

DART/Rev0/JLP/DAP 2
Surface Kill Sheet 1

1. Maximum allowable mud weight


prior to kick 17.9 ppg

2. MAASP prior to kick 2013 psi

3. Strokes from surface to bit 1887 strokes

4. Strokes from bit to shoe 1248 strokes

5. Total circulation
(Through choke line) 7211 strokes

6. Kill mud weight 13.9 ppg (13.82)

7. Initial circulating pressure 750 psi

8. Final circulating pressure 563 - 566 psi

9. The safety margin at initial


stabilised shut-in 1413 psi

10. MAASP after well has been killed 1830 - 1867 psi

11. Pressure drop per 100 strokes 9.75 (9.0 - 10.0) psi/100
strokes

DART/Rev0/JLP/DAP 3

You might also like