5. Data Structures — Python 3.10.4 documentation https://docs.python.org/3/tutorial/datastructures.

html

3.10.4 Go

5. Data Structures
This chapter describes some things you’ve learned about already in more detail, and adds some new things
as well.

5.1. More on Lists

The list data type has some more methods. Here are all of the methods of list objects:

list. append(x)
Add an item to the end of the list. Equivalent to a[len(a):] = [x] .

list. extend(iterable)
Extend the list by appending all the items from the iterable. Equivalent to a[len(a):] = iterable .

list. insert(i, x)
Insert an item at a given position. The first argument is the index of the element before which to insert,
so a.insert(0, x) inserts at the front of the list, and a.insert(len(a), x) is equivalent to
a.append(x) .

list. remove(x)
Remove the first item from the list whose value is equal to x. It raises a ValueError if there is no
such item.

list. pop([i])
Remove the item at the given position in the list, and return it. If no index is specified, a.pop()
removes and returns the last item in the list. (The square brackets around the i in the method signature
denote that the parameter is optional, not that you should type square brackets at that position. You
will see this notation frequently in the Python Library Reference.)

list. clear()
Remove all items from the list. Equivalent to del a[:] .

list. index(x[, start[, end]])

Return zero-based index in the list of the first item whose value is equal to x. Raises a ValueError if
there is no such item.

The optional arguments start and end are interpreted as in the slice notation and are used to limit the
search to a particular subsequence of the list. The returned index is computed relative to the beginning
of the full sequence rather than the start argument.

list. count(x)
Return the number of times x appears in the list.

list. sort(*, key=None, reverse=False)

Sort the items of the list in place (the arguments can be used for sort customization, see sorted() for
their explanation).

list. reverse()

1 of 11 05/05/22, 15:41
5. Data Structures — Python 3.10.4 documentation https://docs.python.org/3/tutorial/datastructures.html

Reverse the elements of the list in place.

3.10.4 Go
list. copy()
Return a shallow copy of the list. Equivalent to a[:] .

An example that uses most of the list methods:

>>> fruits = ['orange', 'apple', 'pear', 'banana', 'kiwi', 'apple', 'banana'] >>>
>>> fruits.count('apple')
2
>>> fruits.count('tangerine')
0
>>> fruits.index('banana')
3
>>> fruits.index('banana', 4) # Find next banana starting a position 4
6
>>> fruits.reverse()
>>> fruits
['banana', 'apple', 'kiwi', 'banana', 'pear', 'apple', 'orange']
>>> fruits.append('grape')
>>> fruits
['banana', 'apple', 'kiwi', 'banana', 'pear', 'apple', 'orange', 'grape']
>>> fruits.sort()
>>> fruits
['apple', 'apple', 'banana', 'banana', 'grape', 'kiwi', 'orange', 'pear']
>>> fruits.pop()
'pear'

You might have noticed that methods like insert , remove or sort that only modify the list have no return
value printed – they return the default None . [1] This is a design principle for all mutable data structures in
Python.

Another thing you might notice is that not all data can be sorted or compared. For instance, [None,
'hello', 10] doesn’t sort because integers can’t be compared to strings and None can’t be compared to
other types. Also, there are some types that don’t have a defined ordering relation. For example, 3+4j <
5+7j isn’t a valid comparison.

5.1.1. Using Lists as Stacks

The list methods make it very easy to use a list as a stack, where the last element added is the first element
retrieved (“last-in, first-out”). To add an item to the top of the stack, use append() . To retrieve an item from
the top of the stack, use pop() without an explicit index. For example:

>>> stack = [3, 4, 5] >>>

>>> stack.append(6)
>>> stack.append(7)
>>> stack
[3, 4, 5, 6, 7]
>>> stack.pop()
7
>>> stack
[3, 4, 5, 6]
>>> stack.pop()
6
>>> stack.pop()
5
>>> stack

2 of 11 05/05/22, 15:41
5. Data Structures — Python 3.10.4 documentation https://docs.python.org/3/tutorial/datastructures.html

[3, 4]
3.10.4 Go

5.1.2. Using Lists as Queues

It is also possible to use a list as a queue, where the first element added is the first element retrieved (“first-
in, first-out”); however, lists are not efficient for this purpose. While appends and pops from the end of list
are fast, doing inserts or pops from the beginning of a list is slow (because all of the other elements have to
be shifted by one).

To implement a queue, use collections.deque which was designed to have fast appends and pops
from both ends. For example:

>>> from collections import deque >>>

>>> queue = deque(["Eric", "John", "Michael"])
>>> queue.append("Terry") # Terry arrives
>>> queue.append("Graham") # Graham arrives
>>> queue.popleft() # The first to arrive now leaves
'Eric'
>>> queue.popleft() # The second to arrive now leaves
'John'
>>> queue # Remaining queue in order of arrival
deque(['Michael', 'Terry', 'Graham'])

5.1.3. List Comprehensions

List comprehensions provide a concise way to create lists. Common applications are to make new lists
where each element is the result of some operations applied to each member of another sequence or
iterable, or to create a subsequence of those elements that satisfy a certain condition.

For example, assume we want to create a list of squares, like:

>>> squares = [] >>>

>>> for x in range(10):
... squares.append(x**2)
...
>>> squares
[0, 1, 4, 9, 16, 25, 36, 49, 64, 81]

Note that this creates (or overwrites) a variable named x that still exists after the loop completes. We can
calculate the list of squares without any side effects using:

squares = list(map(lambda x: x**2, range(10)))

or, equivalently:

squares = [x**2 for x in range(10)]

which is more concise and readable.

A list comprehension consists of brackets containing an expression followed by a for clause, then zero or
more for or if clauses. The result will be a new list resulting from evaluating the expression in the context
of the for and if clauses which follow it. For example, this listcomp combines the elements of two lists if
they are not equal:

>>> [(x, y) for x in [1,2,3] for y in [3,1,4] if x != y] >>>

3 of 11 05/05/22, 15:41
5. Data Structures — Python 3.10.4 documentation https://docs.python.org/3/tutorial/datastructures.html

[(1, 3), (1, 4), (2, 3), (2, 1), (2, 4), (3, 1), (3, 4)]
3.10.4 Go
and it’s equivalent to:

>>> combs = [] >>>

>>> for x in [1,2,3]:
... for y in [3,1,4]:
... if x != y:
... combs.append((x, y))
...
>>> combs
[(1, 3), (1, 4), (2, 3), (2, 1), (2, 4), (3, 1), (3, 4)]

Note how the order of the for and if statements is the same in both these snippets.

If the expression is a tuple (e.g. the (x, y) in the previous example), it must be parenthesized.

>>> vec = [-4, -2, 0, 2, 4] >>>

>>> # create a new list with the values doubled
>>> [x*2 for x in vec]
[-8, -4, 0, 4, 8]
>>> # filter the list to exclude negative numbers
>>> [x for x in vec if x >= 0]
[0, 2, 4]
>>> # apply a function to all the elements
>>> [abs(x) for x in vec]
[4, 2, 0, 2, 4]
>>> # call a method on each element
>>> freshfruit = [' banana', ' loganberry ', 'passion fruit ']
>>> [weapon.strip() for weapon in freshfruit]
['banana', 'loganberry', 'passion fruit']
>>> # create a list of 2-tuples like (number, square)
>>> [(x, x**2) for x in range(6)]
[(0, 0), (1, 1), (2, 4), (3, 9), (4, 16), (5, 25)]
>>> # the tuple must be parenthesized, otherwise an error is raised
>>> [x, x**2 for x in range(6)]
File "<stdin>", line 1, in <module>
[x, x**2 for x in range(6)]
^
SyntaxError: invalid syntax
>>> # flatten a list using a listcomp with two 'for'
>>> vec = [[1,2,3], [4,5,6], [7,8,9]]
>>> [num for elem in vec for num in elem]
[1, 2, 3, 4, 5, 6, 7, 8, 9]

List comprehensions can contain complex expressions and nested functions:

>>> from math import pi >>>

>>> [str(round(pi, i)) for i in range(1, 6)]
['3.1', '3.14', '3.142', '3.1416', '3.14159']

5.1.4. Nested List Comprehensions

The initial expression in a list comprehension can be any arbitrary expression, including another list
comprehension.

Consider the following example of a 3x4 matrix implemented as a list of 3 lists of length 4:

4 of 11 05/05/22, 15:41
5. Data Structures — Python 3.10.4 documentation https://docs.python.org/3/tutorial/datastructures.html

>>> matrix = [ >>>

3.10.4 Go
... [1, 2, 3, 4],
... [5, 6, 7, 8],
... [9, 10, 11, 12],
... ]

The following list comprehension will transpose rows and columns:

>>> [[row[i] for row in matrix] for i in range(4)] >>>

[[1, 5, 9], [2, 6, 10], [3, 7, 11], [4, 8, 12]]

As we saw in the previous section, the nested listcomp is evaluated in the context of the for that follows it,
so this example is equivalent to:

>>> transposed = [] >>>

>>> for i in range(4):
... transposed.append([row[i] for row in matrix])
...
>>> transposed
[[1, 5, 9], [2, 6, 10], [3, 7, 11], [4, 8, 12]]

which, in turn, is the same as:

>>> transposed = [] >>>

>>> for i in range(4):
... # the following 3 lines implement the nested listcomp
... transposed_row = []
... for row in matrix:
... transposed_row.append(row[i])
... transposed.append(transposed_row)
...
>>> transposed
[[1, 5, 9], [2, 6, 10], [3, 7, 11], [4, 8, 12]]

In the real world, you should prefer built-in functions to complex flow statements. The zip() function would
do a great job for this use case:

>>> list(zip(*matrix)) >>>

[(1, 5, 9), (2, 6, 10), (3, 7, 11), (4, 8, 12)]

See Unpacking Argument Lists for details on the asterisk in this line.

5.2. The del statement

There is a way to remove an item from a list given its index instead of its value: the del statement. This
differs from the pop() method which returns a value. The del statement can also be used to remove
slices from a list or clear the entire list (which we did earlier by assignment of an empty list to the slice). For
example:

>>> a = [-1, 1, 66.25, 333, 333, 1234.5] >>>

>>> del a[0]
>>> a
[1, 66.25, 333, 333, 1234.5]
>>> del a[2:4]
>>> a
[1, 66.25, 1234.5]

5 of 11 05/05/22, 15:41
5. Data Structures — Python 3.10.4 documentation https://docs.python.org/3/tutorial/datastructures.html

>>> del a[:]

>>> a 3.10.4 Go
[]

del can also be used to delete entire variables:

>>> del a >>>

Referencing the name a hereafter is an error (at least until another value is assigned to it). We’ll find other
uses for del later.

5.3. Tuples and Sequences

We saw that lists and strings have many common properties, such as indexing and slicing operations. They
are two examples of sequence data types (see Sequence Types — list, tuple, range). Since Python is an
evolving language, other sequence data types may be added. There is also another standard sequence
data type: the tuple.

A tuple consists of a number of values separated by commas, for instance:

>>> t = 12345, 54321, 'hello!' >>>

>>> t[0]
12345
>>> t
(12345, 54321, 'hello!')
>>> # Tuples may be nested:
... u = t, (1, 2, 3, 4, 5)
>>> u
((12345, 54321, 'hello!'), (1, 2, 3, 4, 5))
>>> # Tuples are immutable:
... t[0] = 88888
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
TypeError: 'tuple' object does not support item assignment
>>> # but they can contain mutable objects:
... v = ([1, 2, 3], [3, 2, 1])
>>> v
([1, 2, 3], [3, 2, 1])

As you see, on output tuples are always enclosed in parentheses, so that nested tuples are interpreted
correctly; they may be input with or without surrounding parentheses, although often parentheses are
necessary anyway (if the tuple is part of a larger expression). It is not possible to assign to the individual
items of a tuple, however it is possible to create tuples which contain mutable objects, such as lists.

Though tuples may seem similar to lists, they are often used in different situations and for different
purposes. Tuples are immutable, and usually contain a heterogeneous sequence of elements that are
accessed via unpacking (see later in this section) or indexing (or even by attribute in the case of
namedtuples ). Lists are mutable, and their elements are usually homogeneous and are accessed by
iterating over the list.

A special problem is the construction of tuples containing 0 or 1 items: the syntax has some extra quirks to
accommodate these. Empty tuples are constructed by an empty pair of parentheses; a tuple with one item
is constructed by following a value with a comma (it is not sufficient to enclose a single value in
parentheses). Ugly, but effective. For example:

>>> empty = () >>>

6 of 11 05/05/22, 15:41
5. Data Structures — Python 3.10.4 documentation https://docs.python.org/3/tutorial/datastructures.html

>>> singleton = 'hello', # <-- note trailing comma

3.10.4
>>> len(empty) Go
0
>>> len(singleton)
1
>>> singleton
('hello',)

The statement t = 12345, 54321, 'hello!' is an example of tuple packing: the values 12345 ,
54321 and 'hello!' are packed together in a tuple. The reverse operation is also possible:

>>> x, y, z = t >>>

This is called, appropriately enough, sequence unpacking and works for any sequence on the right-hand
side. Sequence unpacking requires that there are as many variables on the left side of the equals sign as
there are elements in the sequence. Note that multiple assignment is really just a combination of tuple
packing and sequence unpacking.

5.4. Sets
Python also includes a data type for sets. A set is an unordered collection with no duplicate elements. Basic
uses include membership testing and eliminating duplicate entries. Set objects also support mathematical
operations like union, intersection, difference, and symmetric difference.

Curly braces or the set() function can be used to create sets. Note: to create an empty set you have to
use set() , not {} ; the latter creates an empty dictionary, a data structure that we discuss in the next
section.

Here is a brief demonstration:

>>> basket = {'apple', 'orange', 'apple', 'pear', 'orange', 'banana'} >>>

>>> print(basket) # show that duplicates have been removed
{'orange', 'banana', 'pear', 'apple'}
>>> 'orange' in basket # fast membership testing
True
>>> 'crabgrass' in basket
False

>>> # Demonstrate set operations on unique letters from two words

...
>>> a = set('abracadabra')
>>> b = set('alacazam')
>>> a # unique letters in a
{'a', 'r', 'b', 'c', 'd'}
>>> a - b # letters in a but not in b
{'r', 'd', 'b'}
>>> a | b # letters in a or b or both
{'a', 'c', 'r', 'd', 'b', 'm', 'z', 'l'}
>>> a & b # letters in both a and b
{'a', 'c'}
>>> a ^ b # letters in a or b but not both
{'r', 'd', 'b', 'm', 'z', 'l'}

Similarly to list comprehensions, set comprehensions are also supported:

>>> a = {x for x in 'abracadabra' if x not in 'abc'} >>>

>>> a

7 of 11 05/05/22, 15:41
5. Data Structures — Python 3.10.4 documentation https://docs.python.org/3/tutorial/datastructures.html

{'r', 'd'}
3.10.4 Go

5.5. Dictionaries
Another useful data type built into Python is the dictionary (see Mapping Types — dict). Dictionaries are
sometimes found in other languages as “associative memories” or “associative arrays”. Unlike sequences,
which are indexed by a range of numbers, dictionaries are indexed by keys, which can be any immutable
type; strings and numbers can always be keys. Tuples can be used as keys if they contain only strings,
numbers, or tuples; if a tuple contains any mutable object either directly or indirectly, it cannot be used as a
key. You can’t use lists as keys, since lists can be modified in place using index assignments, slice
assignments, or methods like append() and extend() .

It is best to think of a dictionary as a set of key: value pairs, with the requirement that the keys are unique
(within one dictionary). A pair of braces creates an empty dictionary: {} . Placing a comma-separated list of
key:value pairs within the braces adds initial key:value pairs to the dictionary; this is also the way
dictionaries are written on output.

The main operations on a dictionary are storing a value with some key and extracting the value given the
key. It is also possible to delete a key:value pair with del . If you store using a key that is already in use, the
old value associated with that key is forgotten. It is an error to extract a value using a non-existent key.

Performing list(d) on a dictionary returns a list of all the keys used in the dictionary, in insertion order (if
you want it sorted, just use sorted(d) instead). To check whether a single key is in the dictionary, use the
in keyword.

Here is a small example using a dictionary:

>>> tel = {'jack': 4098, 'sape': 4139} >>>

>>> tel['guido'] = 4127
>>> tel
{'jack': 4098, 'sape': 4139, 'guido': 4127}
>>> tel['jack']
4098
>>> del tel['sape']
>>> tel['irv'] = 4127
>>> tel
{'jack': 4098, 'guido': 4127, 'irv': 4127}
>>> list(tel)
['jack', 'guido', 'irv']
>>> sorted(tel)
['guido', 'irv', 'jack']
>>> 'guido' in tel
True
>>> 'jack' not in tel
False

The dict() constructor builds dictionaries directly from sequences of key-value pairs:

>>> dict([('sape', 4139), ('guido', 4127), ('jack', 4098)]) >>>

{'sape': 4139, 'guido': 4127, 'jack': 4098}

In addition, dict comprehensions can be used to create dictionaries from arbitrary key and value
expressions:

8 of 11 05/05/22, 15:41
5. Data Structures — Python 3.10.4 documentation https://docs.python.org/3/tutorial/datastructures.html

>>> {x: 3.10.4

x**2 for x in (2, 4, 6)} >>>
Go
{2: 4, 4: 16, 6: 36}

When the keys are simple strings, it is sometimes easier to specify pairs using keyword arguments:

>>> dict(sape=4139, guido=4127, jack=4098) >>>

{'sape': 4139, 'guido': 4127, 'jack': 4098}

5.6. Looping Techniques

When looping through dictionaries, the key and corresponding value can be retrieved at the same time
using the items() method.

>>> knights = {'gallahad': 'the pure', 'robin': 'the brave'} >>>

>>> for k, v in knights.items():
... print(k, v)
...
gallahad the pure
robin the brave

When looping through a sequence, the position index and corresponding value can be retrieved at the
same time using the enumerate() function.

>>> for i, v in enumerate(['tic', 'tac', 'toe']): >>>

... print(i, v)
...
0 tic
1 tac
2 toe

To loop over two or more sequences at the same time, the entries can be paired with the zip() function.

>>> questions = ['name', 'quest', 'favorite color'] >>>

>>> answers = ['lancelot', 'the holy grail', 'blue']
>>> for q, a in zip(questions, answers):
... print('What is your {0}? It is {1}.'.format(q, a))
...
What is your name? It is lancelot.
What is your quest? It is the holy grail.
What is your favorite color? It is blue.

To loop over a sequence in reverse, first specify the sequence in a forward direction and then call the
reversed() function.

>>> for i in reversed(range(1, 10, 2)): >>>

... print(i)
...
9
7
5
3
1

To loop over a sequence in sorted order, use the sorted() function which returns a new sorted list while
leaving the source unaltered.

9 of 11 05/05/22, 15:41
5. Data Structures — Python 3.10.4 documentation https://docs.python.org/3/tutorial/datastructures.html

>>> basket = ['apple', 'orange', 'apple', 'pear', 'orange', 'banana'] >>>

3.10.4 Go
>>> for i in sorted(basket):
... print(i)
...
apple
apple
banana
orange
orange
pear

Using set() on a sequence eliminates duplicate elements. The use of sorted() in combination with
set() over a sequence is an idiomatic way to loop over unique elements of the sequence in sorted order.

>>> basket = ['apple', 'orange', 'apple', 'pear', 'orange', 'banana'] >>>

>>> for f in sorted(set(basket)):
... print(f)
...
apple
banana
orange
pear

It is sometimes tempting to change a list while you are looping over it; however, it is often simpler and safer
to create a new list instead.

>>> import math >>>

>>> raw_data = [56.2, float('NaN'), 51.7, 55.3, 52.5, float('NaN'), 47.8]
>>> filtered_data = []
>>> for value in raw_data:
... if not math.isnan(value):
... filtered_data.append(value)
...
>>> filtered_data
[56.2, 51.7, 55.3, 52.5, 47.8]

5.7. More on Conditions

The conditions used in while and if statements can contain any operators, not just comparisons.

The comparison operators in and not in are membership tests that determine whether a value is in (or
not in) a container. The operators is and is not compare whether two objects are really the same object.
All comparison operators have the same priority, which is lower than that of all numerical operators.

Comparisons can be chained. For example, a < b == c tests whether a is less than b and moreover b
equals c .

Comparisons may be combined using the Boolean operators and and or , and the outcome of a
comparison (or of any other Boolean expression) may be negated with not . These have lower priorities
than comparison operators; between them, not has the highest priority and or the lowest, so that A and
not B or C is equivalent to (A and (not B)) or C . As always, parentheses can be used to express
the desired composition.

The Boolean operators and and or are so-called short-circuit operators: their arguments are evaluated
from left to right, and evaluation stops as soon as the outcome is determined. For example, if A and C are
true but B is false, A and B and C does not evaluate the expression C . When used as a general value

10 of 11 05/05/22, 15:41
5. Data Structures — Python 3.10.4 documentation https://docs.python.org/3/tutorial/datastructures.html

and not as a Boolean, the return value of a short-circuit operator is the last evaluated argument.
3.10.4 Go
It is possible to assign the result of a comparison or other Boolean expression to a variable. For example,

>>> string1, string2, string3 = '', 'Trondheim', 'Hammer Dance' >>>

>>> non_null = string1 or string2 or string3
>>> non_null
'Trondheim'

Note that in Python, unlike C, assignment inside expressions must be done explicitly with the walrus
operator := . This avoids a common class of problems encountered in C programs: typing = in an
expression when == was intended.

5.8. Comparing Sequences and Other Types

Sequence objects typically may be compared to other objects with the same sequence type. The
comparison uses lexicographical ordering: first the first two items are compared, and if they differ this
determines the outcome of the comparison; if they are equal, the next two items are compared, and so on,
until either sequence is exhausted. If two items to be compared are themselves sequences of the same
type, the lexicographical comparison is carried out recursively. If all items of two sequences compare equal,
the sequences are considered equal. If one sequence is an initial sub-sequence of the other, the shorter
sequence is the smaller (lesser) one. Lexicographical ordering for strings uses the Unicode code point
number to order individual characters. Some examples of comparisons between sequences of the same
type:

(1, 2, 3) < (1, 2, 4)

[1, 2, 3] < [1, 2, 4]
'ABC' < 'C' < 'Pascal' < 'Python'
(1, 2, 3, 4) < (1, 2, 4)
(1, 2) < (1, 2, -1)
(1, 2, 3) == (1.0, 2.0, 3.0)
(1, 2, ('aa', 'ab')) < (1, 2, ('abc', 'a'), 4)

Note that comparing objects of different types with < or > is legal provided that the objects have
appropriate comparison methods. For example, mixed numeric types are compared according to their
numeric value, so 0 equals 0.0, etc. Otherwise, rather than providing an arbitrary ordering, the interpreter
will raise a TypeError exception.
"

Footnotes

[1] Other languages may return the mutated object, which allows method chaining, such as
d->insert("a")->remove("b")->sort(); .

11 of 11 05/05/22, 15:41