Scribd
Upload
25 views14 pages

Cae PR 6

Uploaded by

Tejas Kalvankar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
25 views14 pages

Cae PR 6

Uploaded by

Tejas Kalvankar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 14

NAME : Tejas Dashrath Kalvankar CLASS: TE MECH 1

SEMESTER/YEAR: 6 ROLL NO.: 64

DATE OF PERFORMANCE: DATE OF SUBMISSION:

EXAMINED BY: EXPERIMENT NO:6

AIM OF EXPERIMENT:- Modal analysis – Cantilever beam. Aim: To determine natural frequency of
cantilever beam using FEA package.

E= 2x10e5 Mpa A=10 X 10 mm u= 0.3


Step 1: Open Ansys 2022 Workbench > Analysis Systems > Modal > Ok.

Step 2: Engineering data>Edit>ok


Step 3: Check data > Close

Step 4: Geometry> New design modeler Geometrty>ok


Step 5: Select XY Plane.

Step6: Select sketching


Step 7: Select Look At Face

Step8: change unit to millimeter


Step 9: Select and draw rectangle from origin.

Step10: slect dimension> allot dimension to rectangle


Step 11: Change dimensions from detail panel.

Step12: select extrude from command panel>select depth from detail


panel>Generate
Step 13: Workbench > Modal > Edit > Ok.

Step14: Mesh> Generate> ok


Step15: Step 16: Modal > Insert > Fixed support > Select one end of beam > click
on apply detail panel.
Step 17: Modal > Solve > Ok.

Step 18: Click on solution.


Step 19: Click on graph > click on select all.

Step 20: Click on graph > click on create mode shape results.
Step 21: Solution > Evaluate all result > Ok.

Step 22: Solution >Total deformation.


RESULTS:-

NODAL DISPLACEMENT:-

CONCLUSION:-
SO HERE BY ANALYSIS WE HAVE GOT MAX. DISPLACEMENT IS 2.1457 MM
AT FREQUENCY OF 814.15 HZ

You might also like