Newage® Product Data Sheet

PDS-RND-2010

Roundness Correction Factors March 2010

Corrections to be ADDED to Rockwell Scale A, C, and D Values

Hardness Diameters of Convex Cylindrical Surfaces

Reading 1/4” 3/8” 1/2” 5/8” 3/4” 7/8” 1” 1-1/4” 1-1/2”
6.4mm 10mm 13mm 16mm 19mm 22mm 25mm 32mm 38mm

20 6.0 4.5 3.5 2.5 2.0 1.5 1.5 1.0 1.0

25 5.5 4.0 3.0 2.5 2.0 1.5 1.0 1.0 1.0
30 5.0 3.5 2.5 2.0 1.5 1.5 1.0 1.0 1.0
35 4.0 3.0 2.0 1.5 1.5 1.0 1.0 0.5 0.5
40 3.5 2.5 2.0 1.5 1.0 1.0 1.0 0.5 0.5
45 3.0 2.0 1.5 1.0 1.0 1.0 0.5 0.5 0.5
50 2.5 2.0 1.5 1.0 1.0 0.5 0.5 0.5 0.5
55 2.0 1.5 1.0 1.0 0.5 0.5 0.5 0.5 0
60 1.5 1.0 1.0 0.5 0.5 0.5 0.5 0 0
65 1.5 1.0 1.0 0.5 05 0.5 0.5 0 0
70 1.0 1.0 0.5 0.5 0.5 0.5 0.5 0 0
75 1.0 0.5 0.5 0.5 0.5 0.5 0 0 0
80 0.5 0.5 0.5 0.5 0.5 0 0 0 0
85 0.5 0.5 0.5 0 0 0 0 0 0
90 0.5 0 0 0 0 0 0 0 0

Corrections to be ADDED to Rockwell Scale B, F, and G Values

Hardness Diameters of Convex Cylindrical Surfaces

Reading 1/4” 3/8” 1/2” 5/8” 3/4” 7/8” 1”
6.4mm 10mm 13mm 16mm 19mm 22mm 25mm

0 12.5 8.5 6.5 5.5 4.5 3.5 3.0

10 12.0 8.0 6.0 5.0 4.0 3.5 3.0
20 11.0 7.5 5.5 4.5 4.0 3.5 3.0
30 10.0 6.5 5.0 4.5 3.5 3.0 2.5
40 9.0 6.0 4.5 4.0 3.0 2.5 2.5
50 8.0 5.5 4.0 3.5 3.0 2.5 2.0
60 7.0 5.0 3.5 3.0 2.5 2.0 2.0
70 6.0 4.0 3.0 2.5 2.0 2.0 1.5
80 5.0 3.5 2.5 2.0 1.5 1.5 1.5
90 4.0 3.0 2.0 1.5 1.5 1.5 1.0
100 3.5 2.5 1.5 1.5 1.0 1.0 0.5

Newage®
Quality Assured. Hardness Testing

Visit us on the worldwide web:

www.hardnesstesters.com
Corrections to be ADDED to Superficial Rockwell Scale 15N, 30N, and 45N Values

Hardness Diameters of Convex Cylindrical Surfaces

Reading 1/8” 1/4” 3/8” 1/2” 3/4” 1”
3.2mm 6.4mm 10mm 13mm 19mm 25mm

20 6.0 3.0 2.0 1.5 1.5 1.5

25 5.5 3.0 2.0 1.5 1.5 1.0
30 5.5 3.0 2.0 1.5 1.0 1.0
35 5.0 2.5 2.0 1.5 1.0 1.0
40 4.5 2.5 1.5 1.5 1.0 1.0
45 4.0 2.0 1.5 1.0 1.0 1.0
50 3.5 2.0 1.5 1.0 1.0 0.5
55 3.5 2.0 1.5 1.0 0.5 0.5
60 3.0 1.5 1.0 1.0 0.5 0.5
65 2.5 1.5 1.0 0.5 0.5 0.5
70 2.0 1.0 1.0 0.5 0.5 0.5
75 1.5 1.0 0.5 0.5 0.5 0
80 1.0 0.5 0.5 0.5 0 0
85 0.5 0.5 0.5 0.5 0 0
90 0 0 0 0 0 0

Corrections to be ADDED to Superficial Rockwell Scale 15T, 30T, and 45T Values

Hardness Diameters of Convex Cylindrical Surfaces

Reading 1/8” 1/4” 3/8” 1/2” 5/8” 3/4” 1”
3.2mm 6.4mm 10mm 13mm 16mm 19mm 25mm

20 13.0 9.0 6.0 4.5 4.5 3.0 2.0

30 11.5 7.5 5.0 3.5 3.5 2.5 2.0
40 10.0 6.5 4.5 3.5 3.0 2.5 2.0
50 8.5 5.5 4.0 3.0 2.5 2.0 1.5
60 6.5 4.5 3.0 2.5 2.0 1.5 1.5
70 5.0 3.5 2.5 2.0 1.5 1.0 1.0
80 3.0 2.0 1.5 1.5 1.0 1.0 0.5
90 1.5 1.0 1.0 0.5 0.5 0.5 0.5

Measurement & Calibration technologies For the authorized Newage Distributor or Manufacturer’s Representative near you, go to www.hardnesstesters.com

Americas
AMETEK
Measurement & Calibration
Technologies
820 Pennsylvania Blvd.
Feasterville, PA 19053
United States of America
Tel +1-215-355-6900
Fax +1-215-354-1803
Email [email protected]

Visit Us on the Worldwide Web at:

 2010 by AMETEK, Inc.
www.hardnesstesters.com Information within this document is subject to change without notice.