Scribd
Upload
958 views2 pages

L8 Simplified User Manual

This document provides a quick reference guide and programming instructions for an L8 alarm system. The quick reference section outlines how to perform common alarm functions like arming and disarming in home and away modes. The programming section describes how to enter programming mode and change settings like user codes, telephone numbers, entry/exit times, and auto arm/disarm times using the master code and address values.

Uploaded by

Green Button
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
958 views2 pages

L8 Simplified User Manual

This document provides a quick reference guide and programming instructions for an L8 alarm system. The quick reference section outlines how to perform common alarm functions like arming and disarming in home and away modes. The programming section describes how to enter programming mode and change settings like user codes, telephone numbers, entry/exit times, and auto arm/disarm times using the master code and address values.

Uploaded by

Green Button
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

L8 Alarm System Simplified User Manual

Quick Operation Reference


Away Arm [ User Code ] [ 9 ] or [ User Code ] [ AWAY ]
Home Arm [ User Code ] [ 8 ] or [ User Code ] [ HOME ]
Quick Away Arm [ # ] [ AWAY ] or [ # ] [ 9 ]
Quick Home Arm [ # ] [ HOME ] or [ # ] [ 8]
Disarm [ User Code ] [ 0 ]
Bypass [ User Code ] [ 6 ] [ Zone Number ] [ * ]
Quick Bypass [ # ] [ 6 ] [ Zone Number ] [ * ]
Review [ User Code ] [ 4 ]
Quick Review [#][4]
Walk-test [ User Code ] [ 5 ]
Panic alarm [ # ] [ PANIC ] or [ # ] [ 1 ]
Duress alarm [ User Code with Last Digit + 1 ] [ 0 ]

Programming
Enter programming mode [ Master Code ] [ 7 ] [ Address ] [ Value ] [ * ]
Change Master Code [ Master Code ] [ 7 ] [ 70 ] [ 4 Digits Code ] [ * ]
*Address 70 is Master user, Address 72 to 79 is for user 3 to 9 respectively
Program telephone number 1 [ Master Code ] [ 7 ] [ 91 ] [ New Number ] [ * ] [ * ]
Delete telephone number 3 [ Master Code ] [ 7 ] [ 93 ] [ # ] [ # ]
*Address 91 to 98 is for personal telephone number 1 to 8 respectively, Max. Tel. Number is 16 digits
Program Entry time [ Master Code ] [ 7 ] [ 53 ] [ 3 Digits Value ] [ * ]
Program Exit time [ Master Code ] [ 7 ] [ 54 ] [ 3 Digits Value ] [ * ]
*Entry and exit time are in unit second. Eg. 50 seconds is "050"
Program system time (hour) [ Master Code ] [ 7 ] [ 56 ] [ 3 Digits Value ] [ * ]
Program system time (minute) [ Master Code ] [ 7 ] [ 57 ] [ 3 Digits Value ] [ * ]
Program auto arm time (hour) [ Master Code ] [ 7 ] [ 87 ] [ 3 Digits Value ] [ * ]
Program auto arm time (minute) [ Master Code ] [ 7 ] [ 88 ] [ 3 Digits Value ] [ * ]
Program auto disarm time (hour) [ Master Code ] [ 7 ] [ 89 ] [ 3 Digits Value ] [ * ]
Program auto disarm time (minute) [ Master Code ] [ 7 ] [ 90 ] [ 3 Digits Value ] [ * ]
* System time, auto arm & disarm time are 24-hour format. Eg. 10:30pm is " 022 " and "030"
Call-In and Call-Out Block Diagram

You might also like