Scribd
Upload
57 views2 pages

Remove and Install Air Compressor

Uploaded by

Buku Digital
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
57 views2 pages

Remove and Install Air Compressor

Uploaded by

Buku Digital
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Shutdown SIS

Previous Screen

Product:  WHEEL LOADER 
Model:  926 WHEEL LOADER 94Z 
Configuration: 926E WHEEL LOADER 94Z02209-UP (MACHINE) POWERED BY 3204 ENGINE 

Disassembly and Assembly


3204 VEHICULAR ENGINE SUPPLEMENT FOR 916 & 926 WHEEL LOADERS
Media Number -SENR4055-00 Publication Date -01/01/1986 Date Updated -11/10/2001 

Air Compressor
SMCS - 1803-010

Remove And Install Air Compressor


1. Drain the coolant from the radiator.

To prevent personal injury, be sure the pressure in the air system has
been released before disconnecting any air lines.

2. Open the drain valve on the air tank.

3. Disconnect tube assembly (water inlet) (1) from the air compressor.

4. Remove tube assembly (water outlet) (6) from the timing gear cover and the air compressor.

5. Remove tube assembly (air inlet) (3) from the elbow (air transfer) and the air compressor.

6. Disconnect hose assembly (4) from the air compressor.

7. Remove tube assembly (oil supply) (5) from the engine and the air compressor.

8. Remove tube assembly (2) from the air compressor governor and the air compressor.
9. Remove two bolts (7), and disconnect the bracket and air compressor governor (8) as a unit from
the air compressor.

10. Remove two bolts (9) from the front side of the timing gear cover that hold the air compressor in
position on the back side of the timing gear plate. remove the air compressor and the gasket from the
timing gear cover.

NOTE: For more information and to disassemble and assemble the air compressor, see Air
Compressor, Form No. REGO0914-03 in the Vehicle Systems section.

NOTE: The following steps are for the installation of the air compressor.

11. Make sure all gasket surfaces are clean and free of dirt.

12. Put the gasket and the air compressor in position on the back side of the timing gear plate. Install
two bolts (9) in the front side of the timing gear cover that hold it in place.

13. Put air compressor governor (8) and the bracket in position on the air compressor as a unit. Install
two bolts (7) that hold it in place.

14. Install tube assembly (2) on the air compressor governor and the air compressor.

15. Install tube assembly (oil supply) (5) on the engine and the air compressor.

16. Connect hose assembly (4) to the air compressor.

17. Install tube assembly (air inlet) (3) on the elbow (air transfer) and the air compressor.

18. Install tube assembly (water outlet) (6) on the timing gear cover and the air compressor.

19. Connect tube assembly (water inlet) (1) to the air compressor.

20. Close the drain valve on the air tank.

21. Fill the cooling system with coolant to the correct level. See Maintenance Guide.

Copyright 1993 - 2020 Caterpillar Inc.  Sun Sep 13 16:25:36 UTC+0700 2020 
All Rights Reserved. 
Private Network For SIS Licensees. 

You might also like