Trutzschler BR

2 CONTENT
CONTENT 3
CONTENT
4 Blow room: The true way to your yarn quality
16 Bale openers
26 Installation protection
34 Cleaners and openers
48 Mixers
54 Foreign part separator
68 Tuft blending installations
80 Control systems
88 Disclaimer
4 THE TRUE WAY
The true way

to your yarn quality
On the way to yarn quality and economic
efficiency, spinning mills are facing increas-
ing challenges: shortage of specialists, high
flexibility in production, optimal application of
resources, etc. The creation of true yarn quality involves
the entire process
Since the foundation of our company we have The foundation for yarn quality is established
been using our values to offer you what is in the blow room:
of importance: “The true way to your yarn • BO-P – new bale opener with more bales in
quality”. We are continuously developing new the blend and increased performance
technological solutions that allow you to ad- • T-SCAN – combination of five technologies
dress the rapid market changes, thus ensur- for yarn free of foreign fibers
ing the success of your business. • CONTIFEED 2 – improved degree of clean-
ing due to continuous production
To support you in pursuing “The true way to • Accurate maintenance of blending ratios
your yarn quality”, we are providing practical due to precise weighing
innovations and self-optimising functions here
and now as well.

06-15GB191023
THE TRUE WAY 5
Key positions where resources are Innovative, self-optimising technology

conserved: • T-BLEND Auto Start – self-optimising pro-
• SP-MF – energy savings due to adapted fan duction parameters
speed according to BO-P position • A continuous material flow at all times with
• WASTECONTROL – raw material savings CONTIFEED 2
during cotton cleaning • T-SCAN – the light output of the LED mod-
• T-SCAN – speed sensors with increased ule is permanently optimised for a consist-
precision minimise good fiber loss ent separation rate
• Blow room – Energy Saving Mode – reduces
fan speed to an energy-saving minimum

06-15GB191023
6 THE TRUE WAY
The perfect cotton cleaning

installation for your application
Waste Opener BO-R Condenser BR-COU

Sliver waste
Integrated Heavy Part
Separator SP-IH
Universal Electronic Metal Separator Pre-Cleaner

Cleaned
Bale Opener BO-U SP-EM CL-P
Waste
Cotton Portal Bale Opener Multi-Function Separator

bales BO-P SP-MF
< 750 kg/h
Bale Opener BO-E
The cotton is gradually and gently opened in the precisely

synchronised Truetzschler blow room machines. The answer
to which one is the correct cleaner or optimal cleaner
combination depends on raw material and production output.
Continuous production from the pending on bale size. If required, the manually
beginning fed Bale Openers BO-U or BO-E can also be
The Portal Bale Opener BO-P creates the used.
basis for quality in two ways: On one hand, Secure protection and dust removal
blending is increased by up to 40% thanks to The Multi Function Separator SP-MF com-
the four-row to seven-row bale lay-down, de- bines all relevant functions to protect the blow
room line, including initial dust removal.
06-15GB191023
THE TRUE WAY 7
Universal Mixer MX-I Trunk Feeder FD-T Foreign part separator

Cleaner CLEANOMAT CL-C3 Cleaner T-SCAN TS-T3
CLEANOMAT CL-C3
Dust Separator
DUSTEX SP-DX
Cards TC 19 i
Universal Mixer Universal Cleaner Foreign part separator

MX-U CL-U T-SCAN TS-T5
= Universal
Material transport
components such as fans,
condensers or material
separators have not been
mentioned individually.
Fiber-friendly pre-cleaning Reliable detection and separation

As first gentle fiber cleaning, the Pre-Cleaner of foreign parts
CL-P is the ideal addition to a compact line. The Truetzschler T-SCAN TS-T5 is the most
Coarse contaminants are reliably removed effective system for the separation of foreign
upstream from the mixers and fine cleaners. parts. Self-optimisation functions and five
combinable detection technologies ensure
Homogeneous blending high separation rates. In addition, the high
The Universal Mixer MX-U has been specif- performance Dust Separator DUSTEX SP-DX
ically designed to feed one or two Cleaners can be connected downstream from the sep-
CLEANOMAT CL-U. arators in rotor spinning.
Intensive and gentle cleaning

The new Universal Cleaner CLEANOMAT
CL-U is the first choice for almost all applica-
tions. In the event of special applications, the
Cleaners CLEANOMAT CL-C1 or CL-C3 are
used.
06-15GB191023
8 THE TRUE WAY
Individual opening of different

man-made fibers
Man-made fibers in an increasing variety are becoming
more and more important in short staple spinning.
For this purpose, the modular T ruetzschler blow room
offers customised solutions – from small lines for feeding
one card up to high production rates of 2,000 kg/h.
< 300 kg/h
Compact Bale Opener BO-C
< 750 kg/h
Bale Opener BO-E
Man-made fiber
bales
Universal Bale Opener BO-U Dosing Opener FD-S
Portal Bale Opener BO-P Heavy Part Separator SP-IH Universal Mixer MX-U
Optimal opening of every production size Homogeneous blending for uniform

The Portal Bale Opener BO-P is ideal for large card slivers
lots. The four-row to seven-row bale lay-down To achieve absolutely uniform card slivers with
ensures good blending from the start, even if perfectly homogeneous fiber distribution, mix-
material moisture or reviving agent application ers such as the Universal Mixer MX-U are in-
varies. The Bale Opener BO-E can be used dispensable. This homogenisation is often ne-
for medium production rates. If only one or glected during processing of man-made fibers,
two cards are fed, the Compact Bale Opener thus the moisture content, for example with
BO-C provides the most economical solution. viscose, can differ greatly from bale to bale.
06-15GB191023
THE TRUE WAY 9
Fine Opener TO-C
Opener TUFTOMAT TO-T1

Compact Bale Opener BO-C with Fine Opener TO-C
for productions < 300 kg/h
Universal Opener TO-TU
Feeding Unit FD-O

Cards TC 19 i
Air Separator BR-ASI

Trunk Feeder FD-T
= Universal
Material transport
Optimal opener feeding Individual degree of opening depending components such as fans,
Truetzschler openers can be optionally fed by on fiber type condensers or material
separators have not been
different machines. The Feeding Unit FD-O is A smooth or siliconised polyester fiber or a
ideal for fibers that require additional opening tencel fiber require hardly any opening. In con-
prior to the fine opening process. All other trast, a dull viscose fiber or polypropylene fib-
man-made fibers are transported to the cor- er requires more intensive opening. To meet
responding fine openers via the Trunk Feeder these different requirements, Truetzschler
FD-T. offers three different fine openers with indi-
vidual degrees of opening, depending on fiber
type.
06-15GB191023
10 THE TRUE WAY
Increasing economic efficiency

and conserving resources with
waste recycling
The recovery of good fibers from blow room and card waste can
significantly increase the overall efficiency of the spinning mill.
Small, compact or even large high performance installations for
central waste preparation have a short amortisation period.
Parallel waste
> 750 kg/h
cleaner
for high
production
rates
Universal Bale Opener BO-U Feeding Unit FD-R
Heavy Part Separator SP-IH Waste Cleaner CL-R
< 750 kg/h
Bale Press
Waste
Bale Opener BO-E Pre-Cleaner Feeding Unit FD-R
Heavy Part Separator SP-IH CL-P Waste Cleaner CL-R
= Universal
Material transport components such as fans, condensers or

material separators have not been mentioned individually.
Benefits in integrated or stand-alone Reliable heavy part separation

installations Protecting the installation from heavy parts
When using integrated installations, the waste is of particular importance during waste pro
is usually directly suctioned off from the pre- cessing.
filter of the central filter system and directly
fed to the recycling system. On a stand-alone
installation, a Universal Bale Opener BO-U is
applied that simultaneously also pre-blends
different types of waste.
06-15GB191023
THE TRUE WAY 11
Universal Bale Opener BO-U Pre-Cleaner CL-P
Optimal cleaning of waste Utilisation of valuable fibers

Since waste cleaning is subject to very spe- In theory it is possible to feed the cleaned
cific requirements, fine cleaners are less suit- fibers directly back into the process. In prac-
able for this task. Under qualitative and eco- tise, however, pressing the fibers into bales
nomic aspects, a combination of Pre-Cleaner has proven successful. They can be used in
CL-P and Waste Cleaner CL-R is best suited. another product line or in the bale lay-down of
An initial pre-cleaning takes place already in the same product line, or be sold.
the Feeding Unit FD-R. Further cleaning is
performed by the four CL-R cleaning rolls con-
nected in series.
06-15GB191023
12 THE TRUE WAY
Tuft blending –
homogeneous and efficient
The production of tuft blends in a perfectly homogeneous
as well as efficient manner is an art. The most important
quality criterion is absolutely accurate maintenance of the
blending ratios. This is only possible with weighing.
Sliver waste Waste Opener BO-R
Cotton cleaning line
Cotton bales
High-Performance Feeder BL-HF

Weighing Unit BL-WP
Portal Bale Opener BO-P Dosing Opener FD-S

Man-made fiber
bales
Precision Feeder BL-PF

Weighing Unit BL-WP
Bale Opener BO-E
Material Separator SP-IH
Bale Opener BL-BO

Weighing Unit BL-WP
Flexible fiber preparation Flexible dosing

The entire product range of bale work-off ma- Tuft blending begins with the exact dosing of
chines, pre-openers and cleaners is of course the blending components. This applies to 99
also available for tuft blending installations. percent as well as 1 percent blending ratios.
When cotton is added it should be completely High production rates are best performed
cleaned, dedusted and free of foreign parts on the automatically fed High Performance
before blending it with man-made fibers. Feeder BL-HF or the manually fed Bale Opener
BL-BO. For low blending ratios, the Precision
Weighing Feeder BL-PF is used.
06-15GB191023
THE TRUE WAY 13
Air Separator BR-ASU
Air Separator Cards TC 19 i

Tuft Blending Conveyor Belt Blending Opener Universal Mixer MX-U10 Trunk Feeder FD-T BR-ASI
BL-TC BL-TO Opener TUFTOMAT TO-T1
= Universal
Material transport components such as fans,

condensers or material separators have not been
Precision weighing Flexible fine opening

The pre-opened tufts of the various compo- In principle, all Truetzschler opener versions
nents are very precisely dosed in the Weigh- can be used here. The preferred choice is the
ing Unit BL-WP. Opener TUFTOMAT TO-T 1.
Flexible homogenisation
The precise homogenisation of the tufts takes
place with the Blending Opener BL-TO and
the controlled operating trunk mixers MX-U.
06-15GB191023
14 THE TRUE WAY
06-15GB191023
THE TRUE WAY 15
Modular concept
Highest yarn quality in an efficient manner
The modular installation concepts give you the opportunity

to individually combine compactness, production capacity,
product quality and economic efficiency into a reliable
installation that is like a fingerprint of your requirements.
A good example for the performance are the Opening/Cleaning

cotton cleaning lines for production rates up The cleaners and openers are the centre of
to 1,200 kg/h or two parallel cleaners and every blow room. The Truetzschler solutions
foreign part separators even for 2,000 kg/h. are as diverse as the various natural and man-
The key components of the Truetzschler blow made fibers.
room are:
Blending
Bale opening Whether homogenisation of the natural raw
Bale work-off can be performed fully auto- material cotton or blending of different fibers,
matic. However, there are also various manual graded solutions are available for both tasks.
solutions available.
Foreign part separation and
Installation protection dust removal
Depending on requirements, Truetzschler Truetzschler is the only company that offers
can offer different solutions for heavy and machines with up to five high-end technolo-
metal part separation. The integration of fire gies for foreign part detection. Dust removal
protection devices from reputable provider- can be integrated or take place separately.
shas been prepared. Truetzschler is the only
company that offers a multifunctional solution
here as well.
06-15GB191023
16 Bale openers
Portal Bale Opener BO-P

The T
ruetzschler portal solution for higher
productivity and increased quality
06-15GB200526
The new Portal Bale Opener BO-P

Bale openers 17
Up to 106 % more working width for higher

production rates
With 2,900 mm or 3,500 mm, the Portal Bale Opener
BO-P offers very large working widths for flexible bale
placement. Up to 2,500 kg/h or 3,000 kg/h tufts are
gently and uniformly worked off.
The new and unique portal concept makes the large

working width possible in the first place. Furthermore,
with a bale lay-down area of up to 75 m length, the por-
tal concept allows a completely flexible arrangement of
various bale lots. ➔
Three very large

man-made fiber bales
are worked off here
side by side.
Above 100 % more

working width
06-15GB200526
for higher production rates

18 Bale openers
25 – 45 % less space requirement due to The long bale lay-down area can be flexibly
the larger working width used. The areas can have different lengths.
The concept of the portal with a larger work- This, for instance, can be beneficial to span an
ing width significantly saves hall space. To unattended night shift or weekend. As shown
make optimal use of the space, the BO-P can in the adjacent example, the new Bale Opener
also be positioned close to the wall with free BO-P requires 26 % less building space than
access to the bale lay-down area. the BO-A when using 66 bales in the bale
In addition, the new bale lay-down on only one lay-down.
side considerably simplifies the bale logistics
in the spinning mill.
06-15GB200526
Bale openers 19
189 m2
m
23.0 m
140 m2
32.0
m 140 m2
28.3
8.2m
4.35 m
4.95m
Higher degree of opening thanks Naturally, the Portal Bale Opener BO-P is
to new work-off rolls equipped with the patented penetration inver-
The two longwork-off rolls have nearly twice sion mechanism known from BLENDOMAT
as many teeth, newly arranged. This results in BO-A. Thus, the production is perfectly
a fiber-friendly work-off and a uniform, homo- distributed on two rolls, eliminating wear-in-
geneous surface appearance. The work-off is tensive deceleration with direction of rotation
planar, without gap formation. reversal.
Up to 160 % better blending due to

larger working width and finer needling
It is possible to lay down 5 to 7 bales side by
side. With its two opening rolls, the working
head simultaneously works off up to 14 bales.
This lays the foundation for homogeneous
blending in the blow room.
Savings of up to
45 % building space
06-15GB200526
compared to BO-A
The point density is 25 % higher than on
BLENDOMAT BO-A
20 Bale openers
Using as many bales

as possible in the 500
lay-down improves 450
homogenisation
400
Bale dimensions:
Number of bales
Length 800 mm, 350

width 600 mm 300 m
00 m
250 idt h 3,5
k ing w
Wo r mm
200 ,9 0 0
idth 2
ing w
150 Wo r k
100
50
0
15 18 21 24 27 30 33 36 39 42 45 48 51 54 57 60 63 66 69 72 75
Machine length [m]
Better blending and

smaller tufts due to
larger working width
and finely needled
opening roller.
Substantially smaller
tufts improve Relative degree of opening
the downstream BO-A 1700 = 100%
blending. 300
250
200
150
100
50
0
BO-A 1700 BO-A 2300 BO-A 2900 BO-A 3500
06-15GB200526
Bale openers 21
Intelligent new machine design Simple and easy to operate

• The machine is virtually maintenance-free. The remote display T-LED clearly indicates
There are no lubricating points or roller the operating status also at a larger distance
chains requiring re-lubrication. and eliminates unnecessary walking for the
• No cost intensive wear parts. operator. In case of malfunctions and prior
• The flow-optimised suction ensures a lower to machine start-up, clear visual warnings are
air requirement. issued.
• All drives are infinitely variable on the dis- The portal bale opener is freely accessible
play. This also applies to the opening rolls. from all sides at any time. The intelligent safe-
• The position of the operating unit with col- ty system permanently monitors the danger-
our touch screen is freely selectable in the ous area and reliably protects the operator.
room. During production, the bale lay-down can be
• The programming run at the beginning of monitored at any time.
a new bale lay-down can be carried out
The immediate area
time-efficiently in both directions. of the bale work-
• Assembly time cut in half thanks to pre-as- off is permanently
monitored by an
sembled machines. integrated safety
• No special requirements on floor condi- system.
tions. No concrete or screed work required.
The BO-P is robust against uneven floors
and up or down gradients.
• The machine can inexpensively be moved
or extended.
Hard-pressed waste bales that are difficult to process

are worked off here. The gap-free appearance of the bale
BO-P highlights
surface is perfect even at a production rate of 2,400 kg/h.
• Two working widths, 2,900 and 3,500 mm
• Production up to 3,000 kg/h
• Less space requirement
• Improved blending
• Smaller tufts
• Up to three blends
06-15GB200526
• Flexible size of the two working areas

22 Bale openers
Automatic Bale Opener

BLENDOMAT BO-A
Establishing the quality chain with maximum performance
Flexibility at bale lay-down and during

bale work-off
• Production capacity up to 2,000 kg/h
• Work-off of 1 to 3 bale groups per work
area, optionally on one or two sides
• Up to 200 bale lay-down for extended,
unattended operation (up to three lines
simultaneously)
• Different bale heights are possible
• Free work-off area for a complete reserve
set of bales: Working width max. 2,300 mm
and machine length up to more than 50 m
• Continuous performance in both directions
Optimal start of the quality chain

• Constant tuft sizes and initial blending
The BLENDOMAT BO-A can be flexibly adapt- • Separate lay-down of different cotton quali-
ed to spatial conditions: one-row or two-row ties in different lines is possible
bale lay-downs and feeding of up to three • Direct work-off of two or three different
cleaner and opener lines are possible. The fibers, which are blended on a downstream
quality chain starts with the homogeneous tuft blending installation, on one BO-A.
tuft flow from its gentle bale opening. • Two opening rolls ensure uniform produc-
tion and small tuft size.
Simple and safe operation

• Fully automated bale work-off
• Self-optimised travel speed
• Intuitive touch screen operation
• Minimal maintenance
• Work area secured by light barrier system
Here one opening roll is lifted and the other one lowered during change of travel
direction. This ensures equal distribution of production on both rolls. The usual wear-
intensive deceleration and acceleration of the opening roll is eliminated.
06-15GB200526
Bale openers 23
Hopper Feeder Bale Opener

Compact and economical
Universal Bale Opener BO-U Universal Bale

Opener BO-U (shown
BO-U for smaller lots or in addition to
here in version with
BLENDOMAT BO-A when it comes to power- one trunk feeder)
ful performance and economic efficiency:
• Specific blending of different material flows
by means of additional trunk feeder
• Dosed addition of cleaned waste and
re-feeding of sliver waste
• Selective lay-down of bale layers/bales
• Can be combined with cleaners and openers
Bale Opener BO-E

The smaller and space-saving Bale Opener
BO-E is ideal for medium production rates up
to approx. 750 kg/h. Its technology is compa- The Bale Opener BO-E
is the economical
rable to the one of the BO-U.
solution in the medium
production range.
Compact Bale Opener BO-C
The Compact Bale Opener BO-C is specifical-
ly designed for opening of man-made fibers
at low and medium production rates up to
300 kg/h. It allows highest flexibility on small-
est space by direct feeding of individual cards
The Compact Bale
or small card groups. Opener BO-C is
ideal for feeding of
a small man-made
Waste Opener BO-R
fiber installation and
The Waste Opener BO-R is ideally suited for can directly feed an
feeding small amounts such as card and draw opener.
frame slivers. Its specially designed technol-

ogy ensures uniform feeding even at produc-
tion rates of only 5 kg/h.
The Waste Opener

BO-R reliably opens
sliver waste as well.
06-15GB200526
24 Bale openers
Technical data
Machine Machine Machine Work-off Work-off Max. Max. Average Max. Noise
Portal length width height length width bale continuous power c ontinuous level
bale opener height power consumption production
mm mm mm mm mm mm kW kW/h kg/h db (A)
15,500 – 12,252–
BO-P 4,340 3,750 2,900 / 3,500 1,800 17.7 12.6 2,500 / 3,000 < 70
74,500 71,300
Work-off widths and max. number of bales
74,5 m max.
71,2 m max.
Machine length > 9,6 m 9.6 12.5 15.5 18.4 21.4 24.3 27.3 30.252) 33.2 36.1 39.1 420
Total work-off length1) m 6.3 9.3 12.2 15.2 18.1 21.1 24.0 27.0 29.9 32.9 35.8 38.8
Work-off width 2,9 m Number of bales 3)

34 50 66 82 98 114 131 147 163 179 195 211
Work-off width 3,5 m Number of bales3) 41 61 80 99 119 138 158 177 196 216 235 254
Work-off width 2,9 m Total weight3) 6 9 12 15 18 21 24 27 30 32 35 38
Work-off width 3,5 m Total weight3) 8 11 15 18 22 25 29 32 36 39 43 46
Machine length > 45,0 m 45.0 47.9 50.9 53.8 56.8 59.7 62.7 65.6 68.6 71.5 74.5
Total work-off length1) m 41.7 44.7 47.6 50.6 53.5 56.5 59.4 62.4 65.3 68.3 71.2
Work-off width 2,9 m Number of bales 3)

227 243 259 275 291 307 323 339 355 371 387
Work-off width 3,5 m Number of bales3) 274 293 312 332 351 370 390 409 429 448 467
Work-off width 2,9 m Total weight 3) 41 44 47 50 53 56 59 62 65 67 70
Work-off width 3,5 m Total weight3) 50 53 57 60 64 67 71 74 78 81 85
1) A distance of 2 m must be considered between the bale groups. This reduces the working length.
2) = Standard length 30.25 m
3) When using 90 % of the theoretical area
Manual bale openers

Frame Total Total Total Max. Average Max. Storage Noise level
width width length height continuous power continuous capacity
Manual bale openers power consumption production1)
mm mm mm mm kW kW kg/h m3 db (A)
BO-C 1,000 1,464 5,265 2,250 2.8 1.9 300 1.5 71
BO-E 1,600 1,800 6,180 2,520 4.9 3.5 750 5.0 73
BO-R 1,000 1,464 5,265 2,250 2.8 1.9 100 1.0 72
BO-U 1,600 2,464 7,010 3,000 5.4 3.8 1,700 6 74

06-15GB200526
1) d
epending on material characteristics
Bale openers 25
Automatic Bale Opener BLENDOMAT BO-A

Frame width Height Max. Machine Machine Max. Average power Max. Noise level
Automatic bale length length continuous consumption c ontinuous
bale opener height min. max. power at max. production production
mm mm mm mm mm kW kW kg/h db (A)
BO-A 1,720/2,300 2,900 1,800 10,670 50,270 10,6/10,6 1)
7,4/8,4 2)
1,200/2,000 < 70
1) For productions over 1,500 kg/h = 17.6 kW 2) For productions over 1,500 kg/h = 12.3 kW
Length options and max. number of bales for BLENDOMAT BO-A 1720/BO-A 2300
L6
L5
In small rooms it is possible to arrange the working areas in series
50,270 mm max.
BO-A 1720 max. number of bales** 37 69 101 117 133 165 197 229 261 293
L 5 (mm) 5,810 10,760 15,710 18,185* 20,660 25,610 30,560 35,510 40,460 45,410
L 6 (mm) 10,670 15,620 20,570 23,045* 25,520 30,470 35,420 40,370 45,320 50,270
BO-A 2300 max. number of bales** 50 93 135 157 178 221 264 306 349 392
* = Standard ** = Bale dimensions: L 800 mm  W 600 mm
Equipment
SERIES/OPTION
PORTAL BALE OPENER BO-P
• The standard version of the BO-P has a length of 30,250 mm
Using up to 14 extension units of 2,950 mm each, it can be extended up to 74,500 mm
AUTOMATIC BALE OPENER BLENDOMAT BO-A
• The standard version of the BLENDOMAT BO-A (2,300) has a length (L 6) of 23,045 mm
Using up to 11 extension units of 2,475 mm each, it can be extended up to 50,270 mm
UNIVERSAL BALE OPENER BO-U
• Feed table supply
Automatic material supply is made possible with a Trunk Feeder BR-FU
The feed table can be extended with one to three feed table extensions by 2 m, 4 m or 6 m
If an opener is fed directly then it is possible to temporarily bypass the opener via a reversing flap
Maintenance platform
COMPACT BALE OPENER BO-C / WASTE OPENER BO-R / BALE OPENER BO-E
• Feed table supply
The feed table can be extended with one to three feed table extensions by 2.5m, 5 m or 7.5 m
06-15GB200526
• = Series = Option

Completely secure installation

protection
Multi Function Separator SP-MF
06-15GB191023

Installation protection 27

provides security and lowers operating
costs
The Multi Function Separator SP-MF is locat-
ed downstream from the Portal Bale Opener
BO-P. Supported by an integrated microcom-
puter control, naturally all functions work reli-
ably at all times, even at production rates up
to 2,000 kg/h:
• During suction of the Portal Bale Opener
BO-P or the automatic Bale Opener BO-A,
the fan speed is self-optimised on the bale
lay-down according to position, thus saving
energy costs.
In addition to installation safety, the economic

benefits are convincing. ➔
Economic efficiency calculation

2,000 kg/h, 11 USct./kW
4,350 US$
06-15GB191023
annual savings in energy costs

1. Suction 4. Fire protection

When applying conventional solutions, con- In order to reduce fire damage, the machine
denser and fan always operate at highest out- is equipped with sensors. They are connected
put level to ensure reliable material transport to the installation control.*
even at the furthest point. With Truetzschler,
the fan operates only at the currently required 5. Metal separation
performance, depending where the Portal Cleaners and cards are securely protected
Bale Opener BO-P or the BLENDOMAT BO-A against metal parts: An electronic sensor sur-
is running at the time. Energy costs are con- rounds the fiber channel and detects metal
siderably lowered. parts in the SP-MF. The subsequent extrac-
tion flap is a special Truetzschler develop-
2. Heavy part separation ment; since it is actively moved, it responds
Optimal efficiency at minimal loss of good quickly in both directions. The customary
fibers during the separation of heavy parts is wear-intensive spring pre-tensioning is no
ensured by a special fan speed control. The longer required.
heavy parts are automatically discharged into
a waste container. 6. Waste re-feeding
Soft waste, such as opened card and draw
3. Air separation and dust removal frame slivers, can easily be re-fed without
In conventional systems, the entire air flows the usually required fan: It is sucked up to-
from bale opener to filter system. To increase gether with the main material flow. Thus, it
efficiency, Truetzschler is using an integrat- passes through the entire machine and is also
ed air-volume separator in addition to dust checked for heavy parts and metal particles.
removal. It directs only a small amount of air
into the filter, which can be designed for ap-
prox. 3,000 m3 /h less, resulting in significant
savings in energy costs compared to conven-
tional installations.
* These devices are no substitute for fire protection and
extinguishing equipment to be provided by customer
Energy savings with

Constant fan speed
SP-MF
Consumption
Energy saved
Optim
Power
ised fa
n sp ee
d
Control
Air volume
Speed
SP-MF
Air volume = constant
06-15GB191023
BO-P Fan speed = variable

The Multi Function Separator SP-MF combines many functions in a compact form
1 The material is suctioned by a Portal Bale Opener 8 The next machine (e.g. fan in front of mixer)
BO-P suctions off material
2 The automatic control of the fan ensures uniform 9 A flap conveys the separated heavy parts into the
air volume waste cart
3 A new guiding profile has been developed for the 10 Both waste carts are generously dimensioned.
aerodynamic heavy part separator 11 An extinguishing nozzle is installed at this point*
4 The rectangular duct is monitored by two spark 12 A heat detector monitors the waste container*
detectors* 13 The dusty exhaust air is fed to a filter system
5 The dusty air is extracted in the air separator 14 Opened waste from the Waste Opener BO-R can
6 The metal detector detects all types of metals be fed back without an additional fan
7 The extraction flap does not work with pre-ten-
* These devices are no substitute for fire protection and
sioned springs, but is actively opened and closed
extinguishing equipment to be provided by customer
06-15GB191023
Special machines for installation protection

Protection against heavy parts as well as magnetic and
non-magnetic metals
Electronic Metal Separator SP-EM and Pre-Cleaner CL-P Electronic Metal Separator SP-EM
Basic protection against magnetic Safe metal separation: SP-EM

particles: BR-MT The electronic Metal Separator SP-EM sup-
The Magnet Trap BR-MT fitted into the pipe- ports the protection of cleaners and cards
line offers basic protection against magnetic from metal particles. Since, in the process,
particles that are not stuck in material tufts. the material transport is performed by the
downstream machine, it is free of exhaust air
and requires no filter capacity.
Heavy parts separation: SP-H

The Heavy Part Separator SP-H reliably sepa-
rates heavy parts from the tuft flow. Since it
is maintenance free and requires no electrical
energy, it also does not generate any operat-
ing costs.
Principle of Magnet Trap BR-MT
06-15GB191023
Heavy Part Separator SP-H High performance Heavy Part Separator SP-HU Condenser BR-COU and Integrated
Heavy Part Separator SP-IH
High performance Heavy Part Separator 1 The rectangular duct is monitored by two spark detectors.*
2 The metal detector detects all types of metals.
SP-HU 3 The extraction flap does not work with pre-tensioned springs,
The functional principle of the Heavy Part but is actively opened and closed.
4 An extinguishing nozzle is installed at this point.*
Separator SP-HU corresponds to the S P-H.
5 A heat detector monitors the waste container.*
The integrated fan supply and increased 6 .A large comb directs the tuft flow upwards into the suction.
working width resulted in a design for high Heavy parts fall down through the comb
7 The guiding profile ensure different air speeds in the suction on
throughputs.
top and the separation area at the bottom
8 The flap separates the separation area from the waste bag in
Integrated separation: SP-IH terms of ventilation
9 The large-sized waste bag can be replaced during production
The Integrated Heavy Part Separator SP-IH is 10 Material feeding
directly mounted on a Universal Bale Opener 11 Material suction
BO-U or under a condenser. Since fiber suc- 12 The condenser separates fibers and transport air
13 The adjustable flap permits only heavy parts to pass
tion is performed at a right angle, the heavy 14 The large waste cart can be emptied during production
parts fall straight down. There is no simpler
and cheaper way. * These devices are no substitute for fire protection and extinguishing
06-15GB191023
equipment to be provided by customer

Technical data
Separators
Frame Total Total Total Max. Average Max. Noise
width width length height continuous power continuous level
TYPES power consumption production
mm mm mm mm kW kW kg/h db (A)
SP-MF 1,000 1,664 4,485 4,140 1.4 1) 1.0 2,000 76
SP-H 600 635 1,750 3,250 – – 600 < 70
SP-HU 1,000 1,664 2,025 4,140 9 2) 7.2 2) 2,000 < 76
SP-IH 4) 5) 5) 5) 5) 3) – 2,000 < 70
SP-EM 1,000 1,664 2,460 3,390 1.4 1.0 2,000 < 70
1) Without fans
2) With fans
3) Without condenser
4) Combined with a condenser or a manual bale opener
5) Depending on upstream machine
06-15GB191023
06-15GB191023
WASTECONTROL BR-WCT
Intelligent cleaning saves hundreds of bales of cotton per year
The world exclusive Waste Sensor WASTECONTROL

remains unrivalled in terms of raw material yield.
It allows the surge in productivity from which leading
spinning mills profit today.
06-15GB191023
Small and intelligent: WASTECONTROL reduces waste and lowers raw material costs.
Cleaners and openers 35
Perfect cleaning – the key to efficient ASTECONTROL sensors check the waste
W
production composition in the suctions. This ensures that
The cleaning of cotton has a decisive influence excessive fiber loss is identified in due time.
on the economic efficiency of the installation. The settings of the deflector blades or knives
Even half a percent too much waste results are controlled by small servo motors.
in high, unnecessary additional raw material
expenditure. WASTECONTROL is part of the standard
The settings of the cleaning elements equipment of CLEANOMAT Fine Cleaners
should not be left to chance. The optical CL-U and CL-C3.
The unique tech

nology of the adjust
able deflector blades
controls the amount
of waste on the first
cleaning rolls of the
CLEANOMAT.

With cotton usage of 20,000 t/a, WASTECONTROL saves
approximately 320 bales of cotton/year as a result of a
good fiber yield which is typically improved around 0.4 %.
At a cotton price of 72 ct./lbs., this results in savings of
127,000 US$.
Annual savings of
320 bales of cotton
06-15GB191023
CLEANOMAT system
Optimal economic efficiency, even at more than 1,000 kg/h
The decisive factor for efficient cleaning is

working at the optimal point between degree
of cleaning and economic viability.
CLEANOMAT system:
• Optimal opening and cleaning combined
with extremely gentle fiber treatment, even
at 1,000 kg/h and more
• Freely selectable degree of cleaning by
means of individually adjustable cleaning el-
ements at any time, even during production
• Perfect adaptation to every cotton by
means of specially developed needle and
saw tooth rolls
• Rapid raw material adaptation by means of
infinitely variable roll drives
• Clean machine thanks to direct suction,
allowing processing of even sticky cotton
• Greater yarn quality and improved running
behaviour in spinning through specific per-
manent dedusting of the cotton
• Reduced maintenance outlay due to belt
drives and maintenance-free motors
• Permanent monitoring and precision control
by means of integrated Truetzschler micro-
computers
CLEANOMAT CL-C3 for heavily contaminated cottons

in rotor spinning
The Cleaner
CLEANOMAT CL-C3
features increasingly
finer clothing and
steeper angles of the
clothing teeth from
roll to roll
06-15GB191023
rpm
rpm
rpm rpm
rpm
rpm rpm
rpm
rpm rpm
rpm
rpm
CONTIFEED 2: Self-optimising continuity

of production increases quality
Full utilisation of the potential of a cleaning or
opening line is only possible with the control
module CONTIFEED 2. With CLEANOMAT
cleaners, a high degree of cleaning is achieved
even at high production rates due to the con-
tinuous material flow instead of stop and go.
This self-optimised, continuous production
flow is another component for ensuring clean-
ing quality.
Savings potential with CLEANOMAT system
100 %
80 %
60 %
40 %
20 %
0 %
Space Electr. energy Air
requirement requirement
(filter)
Comparison installation
CLEANOMAT system
25 % savings
in energy costs
compared to a conventional
cleaning line
06-15GB191023
Universal Cleaner CL-U

Self-optimised cleaning performance
06-15GB191023
The Universal Cleaner CL-U has a compact design and requires little space
The Truetzschler WASTECONTROL uses op- The CL-U combines a wide range of
tical sensors to monitor the two suctions of functions:
the CL-U. The application of a special lighting • Self-optimisation of the cleaning quality
technology enables the sensors to distinguish • Effective fine dust removal
between trash and fibers. If the sensors de- • Excellent cleaning technology
tect too many good fibers in the waste, the • Adjustable degree of cleaning
servo motors adjust the knives and deflector • Optical monitoring of the waste quality
blades of the CL-U. If required, this self-opti- via WASTECONTROL
misation is performed while machine is oper- • Continuous card feeding without
ating at full capacity. The material and waste stop and go
suction is permanently monitored by two ad- • Easy operation on colour touch screen
ditional special Truetzschler pressure sensors. • Production rates up to 1,200 kg/h made
possible through 4-roll feeding.
• The core of the cleaner features a large-sized
cleaning roll with two cleaning elements.
2
1
4
3
Elements of self-optimisation and monitoring
1 Servo motor knife

2 WASTECONTROL sensors
3 Servo motor deflector blades
4 Pressure sensors of suctions
06-15GB191023
Universal Cleaner CL-U

CLEANOMAT cleaner
Specialists for clean work
06-15GB191023
Fiber-friendly cleaning: CLEANOMAT Pre-Cleaner CL-P

The first fiber-friendly cleaning:

CLEANOMAT Pre-Cleaner CL-P
The Pre-Cleaner CL-P is the ideal addition to
a cleaning line when the gentle removal of
coarse contaminants from the raw material is
required. For processing ELS cotton, one CL-P
in the line is sufficient for complete cleaning.
Pre-Cleaner CL-P
Fine Cleaner CL-C3
The fine cleaner for heavily contaminated Cleaner CL-P, it can be used for almost all
cotton: CLEANOMAT Cleaner CL-C3 cottons – a flexibility that provides the spin-
The CL-C3 is a stand-alone cleaner designed ning mill with investment protection and
for severely contaminated cottons in short, future reliability.
06-15GB191023
compact lines. In combination with the Pre-

Waste Cleaner CL-R

Recycling waste means saving costs and conserving resources
The higher the usage of raw material cotton

down to the last fiber, the higher the value
creation of the capital invested. Hence, pow-
erful recycling technologies for blow room
and card waste fibers play an increasingly
important role in the economic success of a
spinning mill.
Truetzschler has designed the Waste Cleaner
CL-R for this specific purpose. It differs from
the CLEANOMAT cleaners in a number of
technological features:
• Integrated pre-cleaning stage
• Four rolls with five cleaning elements
• Tray feed for short fibers
• Availability of special clothings
• Adapted roll speed
The result is a significant increase in open-

ing and cleaning. The setting of the degree
of cleaning corresponds to the high level of
the CLEANOMAT series. Its performance can
be further increased by the Feed Unit FD-R,
which opens the material and removes coarse
dirt particles.
Feeding Unit FD-R – Waste Cleaner CL-R

06-15GB191023
Installation concepts for waste cleaning: 2. Waste cleaning as separate line consists
1. W
hen waste cleaning is integrated in pro- of a Universal Bale Opener BO-U and a
duction, the waste can be optionally re- Pre-Cleaner CL-P, which removes coarse
turned into the process, for instance by a contaminants. Another cleaning occurs in
central filter system via a heavy part sep- the Waste Cleaner CL-R. Then the waste
arator and the Waste Cleaner CL-R. It can can be fed to a bale press.
either be fed to a bale press or the lay-
down of another lot.
Truetzschler waste cleaning concept
CL-P CL-R
Typical waste 100 % Fiber recovery 76 % after

Blow room waste with a typical Pre-Cleaner CL-P
fiber content of approx. 50 % Fiber recovery = 760 kg of starting Good fibers 46 % after
(starting material = 1,000 kg) material Waste Cleaner CL-R
Good fibers = 460 kg of starting material
Secondary pre-cleaning waste = Secondary waste of Waste Cleaner

approx. 24 % of starting material CL-R =approx. 40 % of fiber
recovery after the pre-cleaner

20 cards
100 kg/h card sliver production
8 % blow room and card waste
Gain 227,000 US $/year

8,000 operating hours per year
Raw material: 17,280 t
1.0 % fiber yield = 138 t
Cotton price: 72 ct/lbs
Waste price: 15 ct/lbs from waste at 1.0 % fiber yield,
Savings: 227,500 US $ / year cotton price 72 ct/lbs
06-15GB191023
TUFTOMAT system
The tailor-made opener program
TUFTOMAT system for PES/Viscose/Acrylic and other man-made

The TUFTOMAT system offers perfect solu- fibers. Other individual requirements can be
tions for every application: From universal open- realised by different opening rolls.
er for all fibers ≤ 130 mm to special openers
Dosing Opener FD-S

• High performance opener for all fibers
• Three different opening rolls for each mate-
rial and each application
Dosing Opener FD-S
TUFTOMAT TO-T1
• PES/Viscose/Acrylic
• For almost all fibers in the man-made fiber
short staple spinning mill
• Maximum fiber protection
TUFTOMAT TO-T1
Fine Opener TO-C

• Man-made fibers
• Direct feeding through a Universal Bale
Opener BO-U
• Ideal for direct feeding, i.e. of a card or
small card group
Fine Opener TO-C

06-15GB191023
Feeding can look this good
ruetzschler cleaners and openers can be

T Trunk Feeder FD-T
equipped with various devices. The selection The most cost-efficient feeding option
of the optimal combination depends on mate- is the Trunk FD-T in combination with a
rial, production level, available space and indi- CLEANOMAT cleaner.
vidual installation configuration.
Integrated Mixer MX-I
Feeding Unit FD-O A very homogeneous cotton lay-down for
The intelligent design of the FD-O with its cleaners is possible as the most space and
pre-opening function gives fine openers a energy saving solution in combination with
clear performance advantage. a mixer.
Feeding Unit FD-O Trunk Feeder FD-T
Integrated Mixer MX-I

06-15GB191023
Technical data
Cleaners
CLEANOMAT width width length height continuous power continuous level
power consumption production
cleaners
CL-P * 1,300 1,964 1,485 3,250 7.9/11.4 3,9/5,7 800/1,000 < 70
CL-C3 1,600 2,264 2,455 1,250 17,0 6,0 1,000 < 70
BR-COI/
FD-R/* 1,600 2,264 3,265 4,230 27.4 16.4 200** 72
CL-R
CL-U 1,600 2,200 1,480 3,900 5.9 3.0 1,200 < 70
* Maintenance platforms are optionally available

** Input 300 kg/h
Openers
Opener width width length height continuous power continuous level
power consumption production
TUFTOMAT
TO-T1 1,600 2,264 2,165 1,250 6.1 4.3 1,000 < 70
TO-U 1,600 2,064 1,100 1,250 5.9 4.1 1,800 < 70
TO-C 1,000 1,464 860 1,250 2.4 1.7 250 < 70
Feeders Machine combinations

Max. Average Noise level
continuous power CL-C3 TO-T1
Types power consumption Types
kW kW db (A) Total length mm
FD-R 1.3 0.9 72

With FD-O* 4,320 4,030
FD-O 2.4 1.2 73

With FD-T* 3,115 2,825
BR-COI 6.6 – 8.6 5.3 – 6.9 77
BR-MS 0.12 0.1 73
FD-T – – –
06-15GB191023
06-15GB191023
48 Mixers
Mixer MX-U and MX-I

Controlled mixing at high precision
In the area of one component staple fiber Controlled blending

blends, Truetzschler mixer systems offer indi- The mixers are designed as universal (MX-U)
vidual solutions for every assignment: and integrated (MX-I) machines. Depending
• Individual mixer sizes for every task on requirement, six or ten trunks are sequen-
• Maximum homogeneity due to controlled, tially filled from the top and simultaneously
reproducible blending emptied at the bottom on both types. This
• Uniform product appearance by optimising principle guarantees maximum homogeneity
the blend of the mix. In case of highest requirements,
two mixers are set up in series (tandem
If the mixer temporarily does not request any mixing).
material, an automatic changeover to Energy
Saving Mode takes place, thus reducing the MX-U: the flexible solution for every
fan speed to an energy-saving minimum. installation
The Universal Mixer MX-U is ideal for the
feeding of two parallel cleaners. The tufts
reach the 6 or 10 trunks of the mixers via a
fan. In contrast to Mixer MX-I, suctioning of
the mixing duct takes place directly below
the opening rolls. The MX-U uses the inject-
ed transport air for conveying the tufts to the
downstream machine and requires no filter
capacity. ➔
To reduce fire
damage, the
machine is equipped
with sensors that
are connected to
the installation
control. However,
these devices are
no substitute for
fire protection
and extinguishing
equipment to be
provided by customer.
06-15GB191023
The Universal Mixer MX-U is ideal for feeding two parallel installations.
Mixers 49
06-15GB191023
Mixer MX-U10
50 Mixers
Mixer MX-U and MX-I

06-15GB191023
Integrated Mixer MX-I 10, directly coupled with a CLEANOMAT Cleaner CL-C3

Mixers 51
MX-I: the direct linkage

Its direct coupling with a cleaner or opener
makes the Integrated Mixer MX-I ideal for
compact installations. The mixing chambers
are fed from the top by the directly attached
fan: Low-maintenance rotating flaps forward
the material in sequence to all the trunks. In
the lower section of the trunks it is passed to
a mixing conveyor belt via delivery rolls and
large dimensioned opening rolls: Material lay-
ers from all the trunks are stacked in sandwich
format and uniformly fed to the downstream
CLEANOMAT cleaner.
FD-S: small dosing opener for great

uniformity
To obtain a more continuous material flow it
is practical to use small buffer units in some
cleaning and opening lines for uniform feed-
ing of downstream machines. The Dosing Opener FD-S buffers small material amounts
and releases them in doses.
To reduce fire
damage, the
machine is equipped
with sensors that
are connected to
the installation
control. However,
these devices are
no substitute for
fire protection
and extinguishing
equipment to be
provided by customer.
06-15GB191023
Integrated Mixer MX-I, coupled with a CLEANOMAT Cleaner CL-C3

52 Mixers
Technical data
Mixers*
Number Trunk Trunk Width 1) Length1) Machine Max. Average max. max. Noise
of trunks width depth height continuous power continuous filling level
Types power consumption production weight 2)
mm mm mm mm mm kW kW kg/h kg db (A)
MX-U6 6 1,600 500 2,264 5,500 4,040 5.6 3.9 500 < 70
MX-U10 10 1,600 500 2,264 7,500 4,040 7.6 5.3 depends 875 < 70
on the
down-
stream
MX-I6 6 1,600 500 2,264 6,000 4,160 6.0 4.2 machines 400 < 70
MX-I10 10 1,600 500 2,264 8,000 4,160 8.6 6.0 700 < 70
1) W ithout maintenance platform, without fan

2) Depends on degree of opening and material type
Dosing Opener*
Working Width Length Height 1) Max. Average max. Noise
width continuous power continuous level
1,200 1,664 1,100 2,980 – 3,980 5.8 2.9 1,300 < 70

FD-S
1,600 2,064 1,100 2,980 – 3,980 5.8 4.0 1,800 < 70
1) W ith condenser BR-COI 1,000 mm higher

06-15GB191023
Mixers
53
06-15GB191023
Truetzschler T-SCAN TS-T5

High-end quality foreign part separation
The supreme discipline of foreign part detection

are transparent parts and thin, white, thread-
shaped parts. The Truetzschler T-SCAN TS-T5
meets these and other detection requirements
with unprecedented quality.
Self-optimisation with embedded image processing

technology
The machine control performs a number of optimisation func-
tions on request or permanently:
• Balancing of white reference value
• Detection of cotton colour and colour variations
• Permanent consideration of current material speed
• Stop and go detection in feeding and corresponding adjustment
Intelligent waste prevention

Cotton tufts of different colour, trash, stem parts or leave frag-
ments are also foreign parts. These, of course, are detected as
well. However, waste prevention optimisation eliminates high
separation rates. It is better and safer to remove such parts on
the card. A separation on the T-SCAN would result in unnec-
essary fiber loss. Naturally, the separating sensitivity can be
adapted to the cotton quality ➔
The separation of
such parts should be
handled by the card
06-15GB201203

Foreign part separator 55
06-15GB201203
Reduced loss of good fibers and lower

air requirement
The controlled flow in the flat and wide fib-
er channel distributes the tufts evenly over
the width. The selective response of one of
the 48 valves ensures that only a minimum
amount of good fibers is separated. Com-
pared to other systems, this results in annual
material savings of 20,000-50,000 US$.
The permanent speed measurement of the
tuft flow also makes it possible to reduce the
response time of the nozzles to a minimum.
As a result, the compressed air requirement
is only approx. 20 % of that of other systems
Truetzschler speed sensors minimise the compressed air

requirement and fiber loss.
06-15GB201203
The nozzle beam with 144 tiny nozzles

Reducing cleaning to a minimum Minimal maintenance

The Truetzschler T-SCAN is very effectively Standard fluorescent tubes permanently lose
sealed against penetration of dust. Compared their intensity in the blue light range. They
to other systems, it requires substantially less must be replaced approx. after 6 months, oth-
cleaning. Thus, downtimes are reduced by erwise the separation effectiveness declines.
more than 80%. The Truetzschler LED module with 2 times
536 LEDs is monitored and readjusted as
needed. This self-optimisation function en-
sures a constant light intensity.
Every downtime means a production loss and a restart of blow

room and cards. The Truetzschler T-SCAN runs for approx.
one week without having to be cleaned. Other systems must
be cleaned daily or sometimes even once per shift.
Due to the increasing contamination, their separation
effectiveness declines as well.
Detection and separation
Days
1 2 3 4 5 6 7
Stop for cleaning

Average detection and separation (competition)
Truetzschler T-SCAN
06-15GB201203
T-SCAN modules
Trützschler uses five modules for the detection of
foreign parts. Each one is specialised to reliably
detect the characteristic of various foreign parts in
the fast fiber flow.
The reliable detection of foreign parts provides the basis for reaching an
extremely high separation rate of foreign parts in the downstream process
and simultaneously preventing the separation of too many good fibers. This
unique Truetzschler technology makes the T-SCAN TS-T5 essential for the
quality formation in the blow room. ➔
Module Type of foreign part detection
• F-module Coloured/dark foreign parts

• P-module Transparent foreign parts
• UV-module Fluorescent foreign parts
• G-module Shiny foreign parts
• LED-lighting Small/thin foreign parts
In addition to colour,
4-CCD T-SCAN
cameras can also
detect shininess.
06-15GB201203
2 1 4 CCD T-SCAN cameras with very high

resolution and scanning frequency
2 Truetzschler camera with polarisation filter
3 Truetzschler speed sensors
4 Lighting unit with polarisation filter for the
1
1 detection of transparent and semi-transparent
parts in transmitted light
5 UV lighting unit for the detection of fluorescent
foreign parts in incident light
6 Deflection mirror
7 LED lighting module with 536 LEDs and special
lenses for the detection of small thin foreign
parts
8 Nozzle beams with 48 valves and 144 nozzles
9 Rotary valve to separate exhaust air from fiber
flow
3
6
5
7
6 6
7
9
06-15GB201203

T-SCAN modules
F-module detects coloured parts (1) 

Truetzschler uses internally developed T-SCAN cameras with
even higher resolution and scanning rate. The flow of cotton
tufts is continuously monitored from both sides with reliable de-
tection of even small coloured foreign parts.
G-module detects shiny parts (2)

Many foreign parts show no contrast to cotton, but they reflect
light because they are shiny. The Truetzschler gloss module
uses this effect. Two T-SCAN cameras detect parts from two 
sides that differ in their shininess from cotton. To detect small-
est shiny foreign parts, this module works with high resolution
and scanning frequency as well.
P-module detects transparent and

semi-transparent parts (3)
The Truetzschler P-module detects transparent and semi-trans-
parent parts, regardless of their colour. To achieve this, the pat-
ented method uses polarised transmitted light. If the cotton con- 
tains transilluminable foils, packaging residues from PP fabric
and similar parts, they are reliably detected by this module.
UV-module detects fluorescent parts (4)

Some cotton sources contain foreign parts that have a fluores-
cent glow in UV light. Even parts that are difficult to detect, e.g.
bleached cotton, PES or fluorescent PP strips, are reliably de-
tected by the Truetzschler UV-module.

LED lighting detects thin, thread-shaped parts (5)
After a few months - invisible to the eye -, the fluorescent tubes
of common foreign part separators lose the light’s important
proportion of blue, which is crucial for color detection of foreign
parts. By contrast, 1,072 high-performance LEDs with just as
many focused lenses work in the T-SCAN TS-T5. The high light
intensity allows the use of cameras featuring increased resolu-
tion and scanning frequency. To ensure that the light intensity
is maintained in the long run, it is monitored and independently 
readjusted.
06-15GB201203
06-15GB201203
Maximum foreign part separation

at minimum fiber loss
Precise hits at minimal fiber loss Rotary valve reduces good fibers in the
The 48 valves for the 144 nozzles are locat- suction
ed in a compact aluminium profile. The valves To keep the good fiber loss to a minimum,
are positioned directly at the nozzles to allow separation is not to be influenced by the suc-
a quick response and minimal short blowing tion air. Only Trützschler separators feature
time, which in turn contributes to compressed a rotary valve that divides the waste section
air savings. from the suction.
06-15GB201203
The Truetzschler remote display T-LED makes the machine conditions visible from far away.
Simple use of optimisation potential Number of separations

over the time axis and
The objective is maximum foreign part sep-
width of the machine
aration at minimum fiber loss. The machine
control provides all the information required:
• Extensive functional analyses
• Extensive status analysis
• Separation statistics
• Easy to understand screen masks for indi-
vidual optimisation
The settings are automatically preset by the

control. If required, individually adapted set-
G module settings
tings are possible as well.
Powerful display and easy operation

The T-SCAN with large-size touch screen
is easy and intuitive to operate. The screen
also allows the presentation of quality data in
clearly structured diagrams.
T-LED – the Truetzschler remote display

In addition to the touch screen, the Truetzschler
remote display T-LED makes machine condi-
tions visible from far away. Thanks to the mul- The screen is also used
for detailed setting
ticoloured LEDs, various operating statuses
information.
can be indicated.
Data transmission to Mill Monitoring

System “My Mill”
The separation data are important for quality
management. For this reason, T-SCAN data
can also be forwarded to our higher-level data
systems.
06-15GB201203
Truetzschler Foreign part separator

The right machine for every task
ruetzschler T-SCAN TS-T5

T
This machine presents the current high end of
separation technology. The function, number
of detection modules as well as lighting tech-
nology are unique in the market. Even prob-
lems concerning the detection of colourless
and opaque, white PP have been eliminated.
• F-module
• G-module
• P-module
• UV-module
• LED-module
T-SCAN TS-T5
Foreign part separator T-SCAN TS-T3

The TS-T3 is a good choice if low-contrast
foreign parts are no problem. Its structure
is similar to T-SCAN TS-T5 and includes the
modules:
• F-module
• P-module
• UV-module
06-15GB201203
T-SCAN TS-T3
High performance dust extraction This is of particular advantage to downstream

especially for rotor spinning processing: Thoroughly dedusted slivers en-
The effective dust extraction with a DUSTEX sure optimised running behaviour during yarn
SP-DX machine ensures: formation, e.g. in rotor spinning machines, but
• Higher efficiency also significantly higher efficiency rates (less
• Longer lives of clothings and spinning com- yarn breaks) in winding, knitting, warping and
ponents weaving.
• Improved running behaviour of the spinning
machines
• Increased economic efficiency of the total
installation
• Clean ambient air
Dust Separator DUSTEX SP-DX

1 This fan sucks the material off the Cleaner CLEANOMAT
2 The distribution flaps distribute the tufts over the working
width of 1,600 mm
3 Major dust removal takes place by the tufts hitting the
sieve surface
4 The material drops into the suction system and is
transported to the cards by the infinitely variable fan
5 The separated dust is permanently sucked off
2 3
5
4
06-15GB201203
Dust Separator DUSTEX

Technical data
Separators
Frame Total Total Total Max. Average Max. Noise level
width width length height continuous p ower c ontinuous
SP-MF 1,000 1,664 4,485 4,140 1.41) 1.0 2,000 76
SP-H 600 635 1,750 3,250 – – 600 < 70
SP-EM 1,000 1,664 2,460 3,390 1.4 1.0 2,000 < 70
SP-DX 1,600 1,864 2,150 3,110 0.51) 0.41) 1,200 < 70
TS-T5 1,200 1,864 2,618 4,450 2,92) 2,52) 1,200 79
TS-T3 1,200 1,864 2,618 4,450 2,82) 2,42) 1,200 79
1) W
ithout fans
2) Including waste fan
Compressed air requirement per F module ejection (at 7 bar) Nl 0,3

TS-T5
Compressed air requirement per P module ejection (at 7 bar) Nl 1,4
Example of compressed air consumption from practice

TS-T3 - for F/G module 7,200 ejections/h Nl/h 3,800
- for P/UV module 1,000 ejections/h
The compressed air consumption in standard litres refers to the reference conditions according to DIN1343.
06-15GB201203
06-15GB201203
Modular tuft blending system

T-BLEND
Reproducible and exact
When it comes to fiber blends, top priority is maintenance of

the blending ratios. This is only possible with precise weighing.
All other indirect procedures are prone to a gradual deviation
from the setpoint. Guaranteeing the setpoints today, tomorrow
or even a month from now is only possible with weighing.
06-15GB191023
Truetzschler tuft blending system T-BLEND

Tuft blending installations 69
Precision weighing is the key Lot start with self-optimisation of

Bad product quality at a later production stage the parameters
wipes out all previous production efforts and Until now, numerous parameters had to be en-
is thus a “full cost”. This is the reason why tered before starting a lot. The only information
the Truetzschler T-BLEND concept for tuft required by the T-BLEND system is the de-
blending relies on a reproducible and precise sired blending ratios, the required production
blending consistency. The self-monitoring height and the assignment of the fibre mate-
system ensures the perfect quality when rial to the scales. The BLENDCOMMANDER
blending natural or man-made fibers of differ- control finds all other setting parameters in a
ent lengths, finenesses and colours. self-optimising manner. These parameters,
for instance, include the ideal filling weight per
scale and the corresponding filling speed. ➔
1. Dosing with T-BLEND 2. Homogenisation using

Mixer MX-U
The principle of T ruetzschler tuft blending technology:

Creation of precisely dosed layers of different raw materials
and perfect blending of all these layers.
Only Truetzschler
has this to offer:
• Precision mass measurement
• Auto start: The control finds the optimal
parameters in a self-optimising manner
• Direct measurement of the weight
• High capacities up to 2,000 kg/h
• Precise maintenance of blending ratios
• Blending of up to 6 components per process step
• Addition of smallest percentages (up to 1 %)
• Automatic taring, very simple calibration
• Formula memory for quick lot changes
06-15GB191023
• Quality control by means of lot protocols

Tuft Blending System T-BLEND
Blending quality newly defined the volume. During each weighing, the small
Usually the CV value is mentioned as quali- difference to the setpoint is captured and
ty parameter. However, the mass content of compensated fully automatically during the
each fiber type in the total weight is even next weighing.
more relevant for the blending accuracy. The adjacent diagram shows the serious devi-
Hence, T ruetzschler uses specially developed ation between CV value and setpoint.
precision scales to measure the mass and not
Tuft blending installation for two components

with automatic feeding of one component and
manual waste feeding
1 Fan BR-FD
2 High Performance Feeder BL-HF
3 Weighing Unit BL-WP
4 Bale Opener BL-BO
5 Tuft Blending Conveyor Belt BL-TC
1 6 Blending Opener BL-TO
7 Waste Opener BO-R
3
7
6
06-15GB191023
The target weight is

1080 missed despite the
good CV value (red
1060 line). The blending
ratio is incorrect.
X = 1021 g (high deviation from setpoint) CV% = 0.79 (excellent)
Maintaining the
1040
desired target weight
Discharge weight (g)
is important. This only

1020
works with weighing
and not with indirect
1000 measuring methods.
Setpoint 1000 g
980
X = 1001 g (very close to setpoint) CV% = 0.78 (excellent)
960
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Discharges
Blending six components in one step Highest quality in harmony with high
Another advantage of the Truetzschler production rate
T-BLEND tuft blending installations lies in The large volume of the weigh pans and the
their flexibility: two to six components can be short weighing cycles ensure a high through-
blended. This results in an application range put per weighing unit of up to 800 kg/h. One
that covers everything from standard blends T-BLEND installation is designed for produc-
(e. g. 50 % cotton / 50 % polyester) to the tion rates up to 2,000 kg/h.
addition of smallest portions (e.g. 1 % black
fibers ) or colour melanges. New weighing technology for T-BLEND
Compared to previous Truetzschler tuft feed-
ing installations, the performance of the
scales has roughly been doubled, allowing
more weighings per unit of time and more
weight per discharge.
• Auto start: When starting a lot, the control
determines the parameters in a self-opti-
mising manner instead of requiring numer-
ous manual inputs.
• Each individual weighing is registered. Min-
imal deviations are automatically compen-
sated during the next weighings.
• Weighing is performed quicker since the
new high-volume scales are suspended at
three points, which also prevents vibrations.
06-15GB191023
Tuft Blending System T-BLEND
Fully automatic start and finish of a lot Perfect also for different fibers
The BLENDCONTROL of the T-BLEND sys- Blending different types of fibers, e.g. flax
tem features a fully automatic control of the with cotton, and then subsequently carding
start as well as the finish of a lot. them together produces a particularly homo-
geneous product appearance. Even with crit-
Variable blending ratios with one ical blends, Truetzschler installations achieve
installation an absolutely uniform result:
A frequent requirement is the parallel feeding • Items dyed tone in tone
of various blends of the same materials to • Items where only one component is dyed
two lines. With T-BLEND, the typical request
of simultaneous processing of PES / cotton This applies above all in comparison to draw
65 % / 35 % and 50 % / 50 % poses no prob- frame blending where different card slivers
lem. Depending on the requirement of both are blended at the draw frame.
lines, the change from one blend to another is
performed fully automatic.
06-15GB191023
Automatic taring prevents weighing

2nd draw frame passage 3rd draw frame passage
errors
Between the discharge cycles an automatic
taring of the scales takes place at chosen in-
tervals to rule out exterior influences on accu-
racy, e.g. dust deposits. This ensures compli-
ance with blending ratios over a long period
of time.
Tuft blending Draw frame blend
Comparison of tuft blending / draw frame blending:

Cross sections of draw frame slivers (20-fold magnification).
Black: Viscose; white: Cotton
Tuft blending installation

for polyester/cotton 65 %/35 %,
production 2,000 kg/h with waste feeding
1 Fan BR-FD
2 High Performance Feeder BL-HF
3 Weighing Unit BL-WP
4 Tuft Blending Conveyor Belt BL-TC
5 Blending Opener BL-TO
6 Waste Opener BO-R
1
3 2
3 6
5
06-15GB191023
Modular T-BLEND system

Precisely coordinated components
Bale Opener BL-BO for manual feeding The Waste Opener BO-R is suited for the addition of
production waste that has already been blended.
Bale Opener BL-BO Waste Opener BO-R

Due to manual feeding via the feed apron, the This is the unit for accurate addition of spin-
BL-BO is very flexible in its application. Ad- ning waste such as card or draw frame sliv-
ditional feeding from the top via a Material ers. These materials are already blended and
Separator BR-MS is also possible. The feed are therefore added downstream from the
table can be extended. Production rates up Blending Opener BL-TO. Here it is also possi-
to 1,000 kg/h are possible. The BL-BO dis- ble to extend the feed table.
charges the material into the weigh pan of the
weighing unit.
The Weigh Pan BL-WP is suspended at three points on a The Blending Opener BL-TO delivers the blended tufts
solid frame. usually to a trunk mixer.
Weighing Unit BL-WP Blending Opener BL-TO

The weighing unit has been designed for high At the end of the tuft blending conveyor belt,
accuracy and high performance. the blending opener takes on the fibers from
• An innovative three-point suspension pre- the conveyor belt, blends and opens them. The
vents vibrations. four-roll feed unit ensures a high output up to
• To prevent unwanted vibrations, the weigh 2,000 kg/h. The large diameter of the needled
pan is not connected to the feeders. opener roll ensures gentle opening.
• 50 % increase in weigh pan volume.
06-15GB191023
High Performance Feeder BL-HF with automatic feeding Precision Feeder BL-PF for precision dosing
High-Performance Feeder BL-HF Precision Feeder BL-PF

This very space-efficient feeding version can This feeder is designed for adding very small
automatically feed productions up to 800 kg/h. blending components in small productions. A
The material, for instance, can be provided by typical application example are blends with
a cotton cleaning line or a Portal Bale Opener less than 10 % of a component. The Precision
BLENDOMAT BO-P. The High Performance Feeder BL-PF discharges the material into the
Feeder BL-HF discharges the material into the weigh pan of the weighing unit.
weigh pan of the weighing unit.
The Tuft Blending Conveyor Belt BL-TC has a modular structure. Weighing units can perform 2 to 6 feedings.
Tuft Blending Conveyor Belt BL-TC

The tuft blending conveyor offers a high vol-
ume particularly for bulky fibers. Special ele-
ments ensure a very good width distribution
even at production rates up to 2,000 kg/h.
06-15GB191023
BLENDCONTROL –
the T-BLEND control
Consequent direction controlling quality and economy
Precise calibration and fully Other tuft blenders that work with continuous
automatic taring material flow do not allow taring during pro-
Electronic scales can be calibrated quickly duction and are thus prone to a gradual devia-
and precisely by inserting a standard weight. tion of the blending ratio.
In the process, the electronic is automatically
calibrated; operator-based errors are almost More flexibility, speed and clarity:
completely excluded. During operation, taring BLENDCONTROL LC-BC
is performed fully automatic in adjustable in- The BLENDCONTROL LC-BC which is in-
tervals. This guarantees exact weighing at any tegrated into the installation control of the
time during production. tuft blending installation is operated via the
screen of the LINECOMMANDER. New lots
06-15GB191023
as well as the required settings (e.g. produc- Quality control by means of lot reports
tion rate) can easily be selected. A second Quality evidence is more important than ever
screen is available for operation directly at the today. The BLENDCONTROL lot report proves
T-BLEND installation. The operator does not to the customer at any time that the blend-
need to go to the central blow room control ing ratio has been in full compliance with his
first. Since the lot data is stored in a formula requirements.
memory, particular blends that have been pro-
cessed once can always be reproduced, thus
minimising operating errors. Lot changes can
be performed in a very short time.
The visualisation of
the installation shows
the current operating
condition of all
machines at a glance.
BLENDCONTROL
simplifies operation
due to a formula
library.
06-15GB191023
Technical data
Tuft blending
Frame Total Total Total Max. Average Production Noise
width width length height 1) continuous power up to level
Tuft blending installations power consumption approx.
BL-BO 1,600 2,464 7,010 3,000 5.2 2.6 1,000 74
4,500
BL-HF 1,600 2,064 1,900 5.8 2.9 800 < 70
5,000
4,500
BL-PF 1,600 2,064 1,900 5.9 3.0 200 < 70
5,000
BL-WP 1,600 2,000 1,320 1,900 – – 1,000 < 70
BL-TO 1,200 1,664 2,275 1,000 6.4 4.4 2,000 < 70
BL-TC 1,200 1,664 7,750 2) 1000 0.3 3) 0.15 3) 2,000 < 70
BO-R 1,000 1,464 5,265 2,250 2.8 1.9 100 72
1) Without trunk feeding

2) W
ith 3,500 mm centre distance and 2 feedings. For every additional feeding (up to 6), 3,500 mm additional length
3) W
ith 2 feedings. For every additional feeding (up to 6) +0.14 kW installed power, +0.09 kW consumed power
SERIES/OPTION BALE OPENER BL-BO

Automatic material supply is made possible with a Feeding Unit BR-FU.
The feed table can be extended with one to three Feed Table Extensions BR-TE by 2 m, 4 m or 6 m.
Maintenance platform.
• = Series = Option

06-15GB191023
06-15GB191023
80 Control systems
Installation controls and machine controls

Simple operation and optimal data flow
ruetzschler control
T
hierarchy and Mill Monitoring
Level System “My Mill”
communication LC-I
2
Appendices
LC-TCG
1
Machines
0
Sensors
Actuators
ruetzschler installation and machine controls

T These criteria are only met by the Truetzschler
distinguish themselves in various ways during installation and control technology developed
the harsh daily production: and produced in-house. The electronic sys-
• Flexible adjustment to individual customer tem of the Installation Control LC-I is resistant
requirements to dusty air, humidity and high temperatures –
• Reliable, even under extreme conditions conditions common in spinning mills through-
• Network capability out the world.
• Worldwide online availability via Mill Moni-
toring System “My Mill” Installation Control LINECONTROL LC-I
• User friendliness The LINECONTROL LC-I coordinates the
functions of the individual machines and thus
fully automatically controls the material trans-
Installation Control port of the total installation. Malfunctions in
LC-I – operating unit the installation or in individual machines are
with colour screen
graphically displayed, thus allowing quick and
specific reactions. All safety-relevant func-
tions such as emergency stop and door safe-
ties are hardware-wired, ensuring a particular-
ly high level of fail-safe performance.
06-15GB191023
Control systems 81
The Electronic Installation Control LC-I is

optimally suited for coordinating individual
machine controls. It uses modern intelligent
network technology and offers maximum
functional safety and reliability:
• Simple commissioning
• Easy operation on colour touch screen
• High amount of display information
• Use of international standards
• Open system
• Minimum cabling
• Same spare parts as machine controls
Monitoring and display of machine

conditions
All Truetzschler controls ensure constant data
exchange between the machines and the in-
stallations. Thus it is possible, for instance, The operating terminal of the Portal Bale Opener BO-P visualises
the most important data.
to control and monitor the whole installation
regarding production and material flow from a
central point with the Installation Control LC-I. A special software automatically localises
Access to individual machines is possible at possible errors and shows them on the dis-
any time. play. All production processes as well as pos-
At the same time, a number of machines are sible malfunctions can be viewed on displays
equipped with an individual control, which in numerous languages. Simple symbols and
offers many advantages: functional keys facilitate operation.
• Operation directly on the machine
• Significantly lower cabling outlay
• Simple planning
• Closed and tested functional units
Convenient operation of all blow room

Example of a
machines display for the control
All machines of the cleaner and opener lines of a Bale Opener
BLENDOMAT BO-A
with their independent machine controls are
also connected to the central installation con-
trol via the network. Since the machine con-
trols feature the same assembly groups as
the cards and draw frames, spare part costs
can be reduced.
06-15GB191023
82 Control systems
Continuous material flow with

CONTIFEED 2
Optimal cleaning and uniform card feeding
Conventional installations operate on a stop- the installation control and optimally tunes the
and-go basis: The material transport is fre- production rates of the individual machines.
quently switched on and off due to production The advantages of this are a greater clean-
fluctuations. Result: uneconomical production ing efficiency or a higher production at same
and increased quality risks. cleaning efficiency. When processing man-
To ensure continuous operation from the made fibers, CONTIFEED ensures that the
cleaners to the cards, Truetzschler has degree of opening and therefore the tuft size
been using the Modular Control System remains constant. ➔
CONTIFEED for decades. It is integrated into
The standard
CONTIFEED 2 ensures
a continuous and
uniform material flow
to the card
1 Maintenance-free
infinitely variable
motor
2 Controller with
adjustment for
target value
3 Pressure transducer
2
06-15GB191023
1
Control systems 83
100
Production and quality increase
due to CONTIFEED 2 Increase in
Degree of cleaning [%]

80 Continuous
cleaning
Full utilisation of the potential of a material flow
efficiency
cleaner or opener line is only possi- 60
ble with CONTIFEED 2. Increase in

40
Thus, for instance, greater clean- Production
ing efficiency can be achieved in 20 Discontinuous

material flow
CLEANOMAT cleaners even at high-
er productions. 0
0 200 400 600 800 1000 1200
Production [kg/h]
3
06-15GB191023
84 Control systems
Modular Control System CONTIFEED 2
Self-optimisation relieves the operator The improvements of CONTIFEED 2

The new modular control system CONTIFEED 2 are obvious:
offers increased performance in many re- • Uniform card feeding
spects. In addition to uniform material flow • Automatic adjustment during can change
during production, it also automatically finds or sliver break
the optimal setting when commissioning an • Simplified and reduced commissioning
installation. • No manual interference required when
After a one-time learning phase of several material properties change
minutes duration, a fully-automatic transition • Continuous calculation of production
occurs to the production phase. • Compensation of temporary material
shortage
1,400
Evenness of feeding [pressure in Pa]
Production of card group [kg/h]
1,200
1,000
800
600
400
200
0
Without levelling CONTIFEED 2 Time
CONTIFEED Production
Compared to the reliable CONTIFEED system, the new CONTIFEED 2

features self-optimisation during a short learning phase.
With CONTIFEED 2, the operator does not need any special know-how
and is not required to intervene at any time.
06-15GB191023
Control systems 85
Uniform feeding for uniform sliver Based on these data, the control can provide
A typical CONTIFEED 2 application is the precise, uniform feeding of the tuft feeders
control of a cleaner of the CLEANOMAT sys- upstream of the cards. This results in bet-
tem. In this case the material transport from ter card sliver evenness than in stop-and-go
cleaner to card is controlled by evaluating the operation.
pressure in the card feed pipes and the overall
production of the card line as signal.
06-15GB191023
Assembly of digital controls at Truetzschler headquarters in Mönchengladbach, Germany

86 Control systems
Technical data
Special controls for a wide range of applications
ruetzschler offers a series of controls and special components in the control field for planning customised
T
installations in this area as well:
INSTALLATION CONTROLS
LC-I LINECONTROL Control for every T
ruetzschler installation
LC-CU Conversion of control Conversion of existing controls
LC-BC BLENDCONTROL For tuft blending installations as integrated feature in LC-I
SUBDISTRIBUTIONS
LC-DC Subdistribution for cards
LC-DD Subdistribution for draw frames
LC-DCO Subdistribution for combers
MACHINE-SPECIFIC
Continuous material flow control for existing Truetzschler
LC-CF2 Conversion to CONTIFEED 2
machines
Connection and installation set for the cards for installation
LC-IK Connection set
in Nep Sensor TC-NCT
Data for T-BLEND power calculation
1200
el
l ev
Production per weigh pan kg/h
w
ha lo
wit
1000 ial - BO
a te r i ng r BL
M pen a f t e
of o is c o se
vel .v
la r le e . g
800
ar e gu
w ith
ial
te r
M a e ni ng
p
600 vel
o f o o t to n
ig h le e . g .c
ry h
av
e P ES
ith lk y
l w r o r bu
ia p en
e
400 te r
Ma ening er fine o
p f t
o f o ose a
v isc
e.g .
200
0
2,0 3,0 4,0 5,0 6,0 7,0 8,0
Specific material weight [kg/m3]
Production depends to a large extent on the degree of opening of the material.

06-15GB191023
Control systems 87
06-15GB191023
88
vo n
lu n
t a r y c e r tifi c a ti o
www.machines-for-textiles.
com/blue-competence
Trützschler GmbH & Co. KG Textilmaschinenfabrik

Postfach 410164 · 41241 Mönchengladbach, Germany · Duvenstr. 82-92 · 41199 Mönchengladbach, Germany
02EN201005
Telephone: +49 (0)2166 607-0 · Fax: +49 (0)2166 607-405 · e-mail: [email protected] · www.truetzschler.com
89
Scan the QR code to get to the

download area of all brochures.
www.truetzschler.com/brochures
Legal disclaimer:
The brochure has been compiled to the best of our knowledge and in good faith with the utmost care. However, it may be subject to type errors or technical changes for
which we assume no liability. The photos and illustrations are purely informative in nature and in part show special equipment options which do not feature in the stand-
ard scope of delivery. We provide no guarantee as to the current nature, correctness, completeness or quality of the information provided. Warranty claims for material
or immaterial damage against us or the respective author based on the use or forwarding of the information provided, even if the information is incorrect or incomplete,
02EN201005
cannot be asserted. Our provided data is non-binding.

90
Fiber preparation installations: Bale openers · Mixers · Cleaners /

Openers · Foreign part separators · Dust separators · Tuft blenders
Waste cleaners | Cards | Draw frames | Combing machines | Digital
Solutions: My Mill · My Production App · My Wires App
Bale openers / Mixers | Card feeders | Cards / Crosslappers

Wet laying lines | Hydroentangling, needling, thermo- and chemical
bonding lines | Finishing, drying, winding, slitting machinery
Filament lines: Carpet yarns (BCF) · Industrial yarns
Metallic wires: Cards · Cards long staple · Cards Nonwovens

Rotor spinning | Flat tops | Fillets | Carding segments
Service machines | My Wires App | Service 24 / 7
w w w. t r u e t z s c h l e r. c o m
02EN201005
Powered by TCPDF (www.tcpdf.org)

Trutzschler BR

Uploaded by

Copyright:

Available Formats

Trutzschler BR

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Trutzschler BR

Uploaded by

Copyright:

Available Formats

2 CONTENT

4 Blow room: The true way to your yarn quality

34 Cleaners and openers

54 Foreign part separator

68 Tuft blending installations

The true way

Key positions where resources are Innovative, self-optimising technology

The perfect cotton cleaning

Waste Opener BO-R Condenser BR-COU

Universal Electronic Metal Separator Pre-Cleaner

Cotton Portal Bale Opener Multi-Function Separator

< 750 kg/h

Bale Opener BO-E

The cotton is gradually and gently opened in the precisely

Universal Mixer MX-I Trunk Feeder FD-T Foreign part separator

Universal Mixer Universal Cleaner Foreign part separator

Fiber-friendly pre-cleaning Reliable detection and separation

Intensive and gentle cleaning

Individual opening of different

< 300 kg/h

Compact Bale Opener BO-C

< 750 kg/h

Bale Opener BO-E

Universal Bale Opener BO-U Dosing Opener FD-S

Optimal opening of every production size Homogeneous blending for uniform

Fine Opener TO-C

Opener TUFTOMAT TO-T1

Universal Opener TO-TU

Feeding Unit FD-O

Air Separator BR-ASI

Increasing economic efficiency

< 750 kg/h

Material transport components such as fans, condensers or

Benefits in integrated or stand-alone Reliable heavy part separation

Universal Bale Opener BO-U Pre-Cleaner CL-P

Optimal cleaning of waste Utilisation of valuable fibers

Sliver waste Waste Opener BO-R

Cotton cleaning line

High-Performance Feeder BL-HF

Portal Bale Opener BO-P Dosing Opener FD-S

Precision Feeder BL-PF

Bale Opener BL-BO

Flexible fiber preparation Flexible dosing

Air Separator BR-ASU

Air Separator Cards TC 19 i

Material transport components such as fans,

Precision weighing Flexible fine opening

The modular installation concepts give you the opportunity

A good example for the performance are the Opening/Cleaning

Portal Bale Opener BO-P

The new Portal Bale Opener BO-P

Up to 106 % more working width for higher

The new and unique portal concept makes the large

Three very large

Above 100 % more

for higher production rates

Portal Bale Opener BO-P

Up to 160 % better blending due to

Portal Bale Opener BO-P

• Flexible size of the two working areas

The unique tech

compact lines. In combination with the Pre-

Truetzschler waste cleaning concept