Department of Electrical Engineering

Govt. Polytechnic Mayurbhanj, Tikarpada,

Podaastia, Baripada, Odisha - 757049

LABORATORY
MANUAL
Digital Electronics & Microprocessor Lab

(5th Semester)

Prepared By: Leena Marndi

Department of Electrical Engineering

Govt. Polytechnic Mayurbhanj, Tikarpada, Poda
Astia, Baripada, Odisha - 757049
 TABLE OF CONTENTS

Sl. No Name of the Experiment Pages

1
3-9

2
10-14

3
15-17

4
18-19

5
20-21

6
22-27

7
28-31

8
32-35

9
36-39

10
40-42

11
43-45

12
46-47
Sl. No Name of the Experiment Pages

1
3-9

2
10-14

3
15-17

4
18-19

5
20-21

6
22-27

7
28-31

8
32-35

9
36-39

10
40-42

11
43-45

12
46-47
 Inverter Gate (NOT Gate) 7404LS 2-Input AND Gate 7408LS

2-Input OR Gate 7432LS 2-Input NAND Gate 7400LS

2-Input NOR Gate 7402LS 2-Input XNOR Gate 74266LS

2-Input XOR Gate 7486LS

Experiment No:1 Date: / /

Aim: - To Verify truth tables of AND, OR, NOT, NOR, NAND, XOR, XNOR gates.

Apparatus Required: -
1.All the basic gates mention in the fig.
2.IC Trainer Kit

Procedure: -

1. Place the IC on IC Trainer Kit.

2. Connect VCC and ground to respective pins of IC Trainer Kit.

3. Connect the inputs to the input switches provided in the IC Trainer

Kit.

4. Connect the outputs to the switches of O/P LEDs,

5. Apply various combinations of inputs according to the truth table and

observe condition of LEDs.

6. Disconnect output from the LEDs and note down the corresponding

multimeter voltage readings for various combinations of inputs.

Inverter Gate (NOT Gate) 7404LS

A O/P
0 1
1 0
2-Input AND Gate 7408LS

A B O/P
0 0 0
0 1 0
1 0 0
1 1 1

2-Input OR Gate 7432LS

A B O/P
0 0 0
0 1 1
1 0 1
1 1 1

2-Input NAND Gate 7400LS

A B O/P
0 0 1
0 1 1

1 0 1

1 1 0
 2-Input NOR Gate 7402LS

A B O/P
0 0 1

0 1 0

1 0 0
1 1 0

2-Input XOR Gate 7486LS

A B O/P

0 0 0

0 1 1

1 0 1

1 1 0

2-Input XNOR Gate 74266LS

A B O/P
0 0 1

0 1 0

1 0 0
1 1 1

Conclusion:-
Truth table of logic gates are verified.
Experiment No:2 Date: / /

Aim: - Implementation of various gates by using universal properties of NAND & NOR gates
and
Verify truth table.

APPARATUS REQUIRED

1. Digital IC trainer kit

2. IC 7400 (NAND gate)
3. IC 7402(NOR gate)

THEORY:

NAND OR NOR gates are sufficient for the realization of any logic expression. because of
this reason, NAND and NOR gates are known as UNIVERSAL gates.

1. For NAND gate as universal gate

PROCEDURE:

1. Make the connections as per the logic diagram.

2. Connect +5v to pin 14 & ground to pin 7 of IC 7400
3. Apply diff combinations of inputs to the i/p terminals.
4. Note o/p for NAND as universal gate.
5. Verify the truth table. A Ā
0 1
1 0

A B AB
0 0 0
0 1 0
1 0 0
1 1 1
A B A+B
0 0 0
0 1 1
1 0 1
1 1 1

A B
0 0 1
0 1 0
1 0 0
1 1 0

A B A⊕B

0 0 0
0 1 1

1 0 1

1 1 0

A B AʘB
0 0 1
0 1 0
1 0 0

1 1 1
2.For NOR gate as universal gate

PROCEDURE:

1. Make the connections as per the logic diagram.

2. Connect +5v to pin 14 & ground to pin 7 of IC 7402
3. Apply diff combinations of inputs to the i/p terminals.
4. Note o/p for NAND as universal gate.
5. Verify the truth table

A Ā
0 1
1 0

A B A+B
0 0 0
0 1 1
1 0 1
1 1 1

A B AB
0 0 0
0 1 0
1 0 0
1 1 1

A B AB
0 0 1
0 1 1
1 0 1
1 1 0
 A B A⊕B

0 0 0
0 1 1

1 0 1

1 1 0

A B AʘB
0 0 1
0 1 0
1 0 0

1 1 1

Conclusion:-
We have constructed and verified truth table of all gates using universal gates NAND and NOR gate.
Experiment No:3 Date: / /

Aim: - Implementation of half adder and Full adder using logic gates.

APPARATUS REQUIRED

1.IC 7486, IC 7432, IC 7408, IC 7400.

2.Digital trainer kit.

THEORY:
Half-Adder: A combinational logic circuit that performs the addition of two data bits, A and B, is
called a half-adder. Addition will result in two output bits; one of which is the sum bit, S, and the
other is the carry bit, C. The Boolean functions describing the half-adder are:
S =A ⊕ B C=AB

Full-Adder: The half-adder does not take the carry bit from its previous stage into account. This
carry bit from its previous stage is called carry-in bit. A combinational logic circuit that adds two
data bits, A and B, and a carry-in bit, Cin, is called a full-adder. The Boolean functions describing
the full-adder are:

S = (x ⊕ y) ⊕ Cin C = xy + Cin (x ⊕ y)

Procedure: -
1. Verify the gates.
2. Make the connections as per the circuit diagram.
3. Switch on VCC and apply various combinations of input according to the
truth table.
4. Note down the output readings for half and full adder sum and the carry
bit for different combinations of inputs.

Half Adder using basic gates:-

Full Adder using basic gates:-

Half Adder using NAND gates only:-

Full Adder using NAND gates only:-

 K-map for half adder

Half adder
A B S C
0 0
0 1
1 0
1 1

K-map for full adder

Full Adder
A B Cin S C
0 0 0
0 0 1
0 1 0
0 1 1
1 0 0
1 0 1
1 1 0
1 1 1

Conclusion: -
Half adder and full adder are constructed and their truth tables are verified.
Experiment No:4 Date: / /

Aim: - Implementation of half subtractor and Full subtractor using logic gates.

APPARATUS REQUIRED

1.IC 7486, IC 7432, IC 7408,IC7404, IC7400.

2.Digital trainer kit.

THEORY:

Half Subtractor: Subtracting a single-bit binary value B from another A (i.e. A -B) produces a
difference bit D and a borrow out bit B-out. This operation is called half subtraction and the circuit
to realize it is called a half subtractor. The Boolean functions describing the halfSubtractor are:

D =A ⊕ B Br = Α̅ B

Full Subtractor: Subtracting two single-bit binary values, B, Cin from a single-bit value A produces a
difference bit D and a borrow out Br bit. This is called full subtraction. The Boolean functions
describing the full-subtracter are:

D = (x ⊕ y) ⊕ Bin Br = Α̅B + Α̅ (Bin) + B (Bin)

Procedure: -
1. Verify the gates.
2. Make the connections as per the circuit diagram.
3. Switch on VCC and apply various combinations of input according to the
truth table.
4. Note down the output readings for half and full subtractor difference and
borrow bit for different combinations of inputs.
Using X – OR and Basic Gates (a)Half Subtractor

Full Subtractor

Using only NAND gate (a) Half subtractor

 (b) Full Subtractor

Half Subtractor
A B D Br
0 0
0 1
1 0
1 1
 Full Subtractor
A B Bin D Br
0 0 0
0 0 1
0 1 0
0 1 1
1 0 0
1 0 1
1 1 0
1 1 1

Conclusion: -

Half subtractor and full subtractor are constructed and their truth tables are verified.
Experiment No:5 Date: / /

Aim: - Implementation of a 4-bit Binary to Gray code converter.

APPARATUS REQUIRED

1. IC 7486
2.Digital trainer kit

THEORY:
Gray Code is one of the most important codes. It is a non-weighted code which belongs to a
class of codes called minimum change codes.
In this codes while traversing from one step to another step, only one bit in the code group
changes.
The input variable are designated as B3, B2, B1, B0 and the output variables are designated as
G3, G2, G1, G0.

Procedure: -
1. The circuit connections are made as shown in fig.
2. Pin (14) is connected to +Vcc and Pin (7) to ground.
3. In the case of binary to gray conversion, the inputs B0, B1, B2 and B3 are given at
respective pins and outputs G0, G1, G2, G3 are taken for all the 16 combinations of
the input.
4. The values of the outputs are tabulated.

TRUTH TABLE:

Binary Input Gray code output

B3 B2 B1 B0 G3 G2 G1 G0

0 0 0 0 0 0 0 0

0 0 0 1 0 0 0 1
0 0 1 0 0 0 1 1

0 0 1 1 0 0 1 0

0 1 0 0 0 1 1 0

0 1 0 1 0 1 1 1

0 1 1 0 0 1 0 1

0 1 1 1 0 1 0 0

1 0 0 0 1 1 0 0

1 0 0 1 1 1 0 1

1 0 1 0 1 1 1 1

1 0 1 1 1 1 1 0

1 1 0 0 1 0 1 0

1 1 0 1 1 0 1 1

1 1 1 0 1 0 0 1

1 1 1 1 1 0 0 0
K-Map for G3:

G 3 = B3

K-Map for G2:

K-Map for G1:

K-Map for G0:

LOGIC DIAGRAM

Conclusion: -

4-bit Binary to Gray code converter is constructed and their truth tables are verified.
Experiment No:6 Date: / /

Aim: - Implementation of a Single bit digital comparator.

APPARATUS REQUIRED

1. IC 7404,IC 7408,IC 74266

2.Digital trainer kit

THEORY:
Magnitude Comparator is a logical circuit, which compares two signals A and B and generates
three logical outputs, whether A > B, A = B, or A < B.

Procedure: -
1. The circuit connections are made as shown in fig.
2. Pin (14) is connected to +Vcc and Pin (7) to ground.
3. The inputs A,B are given at respective pins and outputs A > B, A = B, or A < B are
connected to the output LED.
4. The values of the outputs are tabulated.

TRUTH TABLE

INPUTS OUTPUTS
A B A>B A=B A<B
0 0 0 1 0

0 1 0 0 1

1 0 1 0 0
1 1 0 1 0
LOGIC DIAGRAM

Conclusion: -

A Single bit digital comparator is constructed and it’s truth tables are verified.
Experiment No:7 Date: / /

Aim: - To study Multiplexer and demultiplexer.