Prometer 100

Precision Metering Series

Prometer 100, series of next generation energy meter designed

for power transfer points requiring precise measurements and
revenue transaction. Flexible and modular communications
ensure integration with existing AMR / AMI / SCADA systems
and upgrade to future SAS systems. 4 quadrant energy
measurement allows monitoring of generation, transmission
and distribution loads.

Application Features
 Energy transfer measurement and reconciliation  0.2S/0.5S accuracy for active and reactive measurement
 Power plants, feeder monitoring, grid substations,  Wide-range dual auxiliary supply with options for AC/DC
wind turbines, industrial and commercial premises and self-power (VT powered)
 On-line monitoring of energy exchange at various  Power quality features including THD, sag, swell, voltage
interface points unbalance and interruption recording
 Energy accounting, automation and system integration  Dynamic error compensation for CT/VT
 Transformer/Line loss adjustment (Copper and Iron losses)
 Intuitive graphical display including vector diagram, wave
Benefits
forms and bar chart for consumption
 Minimal integration cost through multiple
 Remote configuration of communication ports
communication interfaces
 Simultaneous DLMS and MODBUS over Ethernet port
 Suitable for diverse applications through wide-range
 Support of meter reading / display over field replaceable
voltage, current and auxiliary supply inputs
battery
 Support of industry standard DLMS and MODBUS meter
 Dual loggers for energy and instantaneous parameters
reading protocols
 Flexible time-of-day tariff, maximum demand support,
 Meter reading and display viewing under power outage
DST (Daylight saving time) support with automatic billing
 Field replaceable hot pluggable communication modules
dates
 Multi-lingual support on display (Swedish,
 Meter cover and terminal cover open detection
German and English)
 RS232 port compatible with meter-powered modem
 Prometer 100
The Prometer 100 offers various communication modules such as Rs232 with output to power up terminal modem, RS485 for multi-drop
connectivity and Ethernet for integrating into communication bus. The communication modules can be hot plugged in field and locally or
remotely configured for IDs, IP addresses. Multiple port opening on Ethernet allows for simultaneous communication over MODBUS and
DLMS through different clients. All communication ports can simultaneously transfer data at high speeds.

RS485 and Ethernet port scheme station

Service Port 502
for MODBUS

RS232/RS485
Converter
Server

Service Port 4059 RS485 Port

for DLMS Online
monitoring system

Network switch
Ethernet Port LAN Switch
Telecom panel

WAN
Clients

Rs485 Network

Bay Ethernet Network

control unit
Digital pulse output

Telecom panel Digital pulse output

Product options

Class Measurement Power supply 1 Power supply 2

0.2S HV3 / HV4 / LV4 Self power 60-240 V AC/DC (±20%)
0.5S LV4 60-240 V AC/DC (±20%) 24-48 V DC (±20%)

Communication port 1 Communication port 2 Communication port 3 Pulse input / output

Ethernet RS232 RS232 No pulse I/O
RS485 RS485 4 configurable I/O
4 configurable I/O and 7 fixed pulse O/P
 Prometer 100
Technical specifications

Electrical
Connection type HV3/HV4/LV4
Measurement voltage range 57.7 V to 240 V (L-N), 100 V to 415 V (L-L) ±30%
Measurement current range 1-10 A (configurable)
Frequency 50/60 Hz ±5%
Burden with auxiliary / Self (VT) powered Current circuit:
< 0.1 VA/phase @ 1A
< 0.5 VA/phase @ 5A
Voltage circuit in case of Aux power:
< 0.1 VA/phase
Voltage circuit in case of internal / self power:
< 6 VA/phase
Accuracy Class 0.2S and class 0.5S
Maximum overload Voltage 1.5 times of nominal voltage continuously
2 times of nominal voltage for 0.5 second
Maximum overload current 1.5 times of Imax continuously
10 times Imax for 1 second
20 times Imax for 0.5 second

Compliance
Standards IEC 62052-11, IEC 62053-22, IEC 62053-23, IEC 62056-52, IEC 61010-1,
IEC 61010-2-030, CE, MID (EN 50470-1, EN 50470-3)

Environmental IP54
Operating temperature -10 °C to + 60 °C
Limit range of operation -25 °C to + 70 °C
Storage temperature -40 °C to + 80 °C
Temperature coefficient <0.3%/100C for class 0.5
Temperature coefficient <0.1%/100C for class 0.2

Software Two data loggers:

Maximum 50 parameters configurable in each logger
Logging of up to 22 energy channels, with integration period 5 to 60
minutes
Specifications are subject to change without prior notice.
80+ parameters available for logging of instantaneous values with
integration period 1 to 60 minutes
~9600 Parameter-days capacity at 30 minute interval in each logger
Configurable parameters:
8 time-of-use tariffs, 16 Seasons, 16 Day types and 16 Time zones,
53 Billing dates, 30 DST dates
Logging of up to 100 day for daily energy snapshots
7 configurable display sequences along with fixed, auto and
sealed button sequences
60+ alarms and 10+compartments for event logging
Logging of up to 15 sets of historical data logging
Up to 31st individual harmonic component measurement
Power quality features, including voltage sag, swell, unbalance recording
Delta values monitored and logged
Code of Practice (UK BSCP) security protection
Prometer 100
Features
Power supply Dual / Single auxiliary supply
Range: 60-240 V AC/DC (±20%), Burden: <10VA
Optional range: 24-48 V DC (±20%),Burden: <10VA
Display Graphical, with green backlight
extended temperature range -200C to 700C
Size: 69 x 39 mm (H x W), 128x80 pixels
Pixel size: 0.5 mm²
Max display character size 10 x 5 mm (H x W)
Battery Field-replaceable battery for RTC back up
Configurable option to support meter reading / display

Inputs and Outputs Total 11 digital outputs

Out of which 4 can be configured as inputs
Pulse outputs
Type: Volt-free, 100 mA
Voltage: 48-240 V AC/DC, Option for 24-40 V DC,
Pulse width: 20 - 300 ms (for 50Hz); 16 - 300 ms (for 60Hz)
Configurable as pulse input/output
Pulse output Type: Volt-free, 100mA
Pulse input type: Optical isolator
Voltage: 24-240 V AC/DC

Indicator Six LEDs: 2 for metrology, 2 for pulse outputs, 2 for alarms/events

Communication Port Optical 1107 port

Protocol: DLMS, Baud rate: 1200 19200 bps, Half duplex
RS232 port
Built-in supply of 4 V @ 550 mA, Protocol: DLMS,
Baud rate: 1200 57600 bps, Half duplex
RS485 port
Protocol: Configurable DLMS/MODBUS RTU,
Baud rate: 1200 57600 bps, Half duplex
Ethernet port
10/100 Mbps, Protocol: DLMS and MODBUS TCP simultaneous client
Full duplex Specifications are subject to change without prior notice.

Connector type: standard RJ45 for all the ports except optical

Accessories (optional) Panel mounting kit / RS232 communication module /

RS485 communication module / Terminal modem / Software

# Electrical, compliance, mechanical, software, features options depend on its variant.

Cewe Instrument AB
Box 1006 | SE-611 29 Nyköping | Sweden | Tel: +46 (0)155 775 00 | E: [email protected] | Fax: +46 (0)155 775 97 | www.ceweinstrument.se

A Secure group company

Secure House, Moorside Road, Winchester, Hampshire, SO23 7RX, England | T: +44 (o) 1962 840048 | F: +44 (o) 1962 841046
E: [email protected] | www.securetogether.com
Brochure Version Number - 1.0