CNC Insert Tooling

CNC Insert Tooling
www.EngineeringBooksPdf.com
www.guhdo.com
Insert Router Bit
6217 Z1 For grooving, jointing and rebating on composite materials.
Can plunge up to 1/2" diameter.
Not recommended for use on solid woods.
Replacement wedges available upon request.
Part Number D L2 L1 Shank

6217.080.20 8 20 60 9.5 x 30
6217.100.20 10 25 60 9.5 x 30
6217.081.20 8 20 70 10 x 40
6217.090.20 9 20 70 10 x 40
6217.101.20 10 25 75 10 x 40
6217.110.20 11 25 75 10 x 40
6217.120.20 12 30 80 10 x 40
6217.140.20 14 30 80 10 x 40
6217.082.20 8 20 70 12 x 40
6217.102.20 10 25 75 12 x 40
6217.121.20 12 20 70 12 x 40
6217.120.30 12 30 80 12 x 40
6217.120.31 12 30 80 12 x 40 (LH)
6217.140.30 14 30 80 12 x 40
6217.140.31 14 30 80 12 x 40 (LH)
6217.160.50 16 50 100 12 x 40
6217.953.20 3/8" 20 65 3/8" x 30
6217.127.30 1/2" 30 80 1/2" x 40
6217.127.31 1/2" 30 80 1/2" x 40 (LH)
Solid Carbide Inserts

Part Number Dimensions D
4201.021.11 20 x 4.1 x 1.1 For D = 8mm, 9mm & 3/8"
4201.020.11 20 x 5.5 x 1.1 For D = 12 x 20mm
4201.025.11 25 x 5.5 x 1.1 For D = 10mm & 11mm
4201.030.11 30 x 5.5 x 1.1 For D = 12mm, 14mm & 1/2"
4201.050.11 50 x 5.5 x 1.1 For D = 16mm
Replacement Parts
39080-0-25301-R M2.5 x 3.0 Screw For D = 8mm
39080-0-25401-R M2.5 x 4.0 Screw For D = 9mm, 10mm, 11mm & 3/8"
39080-0-30701-R M3.0 x 7.0 Screw For D = 12mm, 14mm & 1/2"
39080-0-35551-R M3.5 x 5.5 Screw For D = 16mm
39077-0-03008-1 TORX star key for M2.5 & M3 screw (T8)
39077-0-04015-1 TORX star key for M3.5 screw (T15)
800-544-8436
Insert Router Bit
6219 Z1+Z1 For producing rebates and shallow grooves.
For use on composite and solid materials.
With downshear for clean surface finish.
With plunging inserts.
Maximum RPM = 18,000
Part Number D L2 L1 Shank Dia./Length

6219.160.12 16 12 70 1/4 x 30
6219.180.12 18 12 70 1/4 x 30
6219.200.12 20 12 70 1/4 x 1/4
6219.240.12 24 12 70 1/4 x 30
6219.161.12 16 12 70 1/2 x 30
6219.181.12 18 12 70 1/2 x 30
6219.201.12 20 12 70 1/2 x 30
6219.241.12 24 12 70 1/2 x 30

Part Number Dimensions Solid Carbide Knives
4200.012.00 12 x 12 x 1.5 Peripheral insert
4200.008.00 7.5 x 12 x 1.5 Plunge insert for D = 16mm & 18mm
4200.009.00 9 x 12 x 1.5 Plunge insert for D = 20mm
4200.012.00 12 x 12 x 1.5 Plunge insert for D = 24mm
Replacement Parts
39076-0-03500-R M3.5 x 4 screw D= 16mm & 18mm
39076-0-04040-R M4 x 4 screw D = 20mm
39076-0-04000-R M4 x 5.9 screw for plunge knife D = 24mm
39081-0-04050-R M4 x 5 screw for plunge knife D = 16mm, 18mm & 20mm
39077-0-04015-1 TORX wrench
www.guhdo.com
Insert Router Bit
6219 Z1+Z1 For grooving, jointing & rebating, with plunging insert.
For use on composite and solid materials.

6219.161.30 16 30 71 10 x 30
6219.180.30 18 30 71 10 x 30
6219.200.30 20 30 71 10 x 30
6219.220.30 22 30 71 10 x 30
6219.162.30 16 30 81 12 x 40
6219.162.31 16 30 81 12 x 40 (LH)
6219.181.30 18 30 81 12 x 40
6219.181.31 18 30 81 12 x 40 (LH)
6219.201.30 20 30 81 12 x 40
6219.201.31 20 30 81 12 x 40 (LH)
6219.221.30 22 30 81 12 x 40
6219.160.50 16 50 101 14 x 40
6219.160.30 16 30 91 16 x 45m.E. M6
6219.160.31 16 30 91 16 x 45m.E. M6 (LH)
6219.161.50 16 50 106 16 x 45m.E. M6
6219.162.50 16 50 116 25 x 55m.E. M8
6219.180.50 18 50 116 25 x 55m.E. M8
6219.180.51 18 50 116 25 x 55m.E. M8 (LH)
6219.190.50 3/4" 50 110 3/4" x 50 m.E. M8
6219.200.31 20 30 96 25 x 55m.E. M8 (LH)
6219.200.50 20 50 116 25 x 55m.E. M8
6219.200.51 20 50 116 25 x 55m.E. M8 (LH)
6219.220.50 22 50 116 25 x 55m.E. M8
6219.163.50 16 50 144 MK2/M30 x 1.5
6219.183.50 18 50 144 MK2/M30 x 1.5
6219.203.50 20 50 144 MK2/M30 x 1.5
6219.221.50 22 50 144 MK2/M30 x 1.5

Part Number Dimensions Features
4201.030.11 30 x 5.5 x 1.1
4201.050.11 50 x 5.5 x 1.1
4200.012.00 12 x 12 x 1.5 Plunging tip (4-sided)
(LH) denotes left hand rotation. Replacement Parts

m.E. denotes adjusting screw size. Part Number Dimensions Diameter
39080-0-35551-R M3.5 x 5.5 screw for plunge knife 16mm, 18mm, 3/4"
Adjustment screw for Leuco PS system
available upon request. 39080-0-35651-R M3.5 x 6.5 screw for plunge knife 20mm, 22mm
39076-0-04000-R M4 x 5.9 TORX screw for plunge knife 16mm, 18mm, 3/4"
Fractional shank sizes available 39076-0-04070-R M4 x 7 screw for plunge knife 20mm, 22mm
on request. 39077-0-04015-2 TORX star key for M3.5 & M4 screw (T15)
800-544-8436
6224 Z2 Insert Router Bit
For grooving, rebating and jointing on composite and solid materials.
Maximum RPM = 18,000

6224.161.30 16 30 100 3/4 x 55 m.E. M8
6224.160.30 16 30 100 25 x 55 m.E. M8
6224.161.50 16 50 120 3/4 x 55 m.E. M8
6224.160.50 16 50 120 25 x 55 m.E. M8

Part Number Dimensions L2 D
6419.030.09 30 x 9 x 1.5 For L2 = 30 16 mm
6419.050.09 50 x 9 x 1.5 For L2 = 50 16 mm
Replacement Parts
Part Number Dimensions
39080-0-03548-R M3.5 x 4.8 screw
39077-0-04015-2 TORX wrench (T15)
Insert Router Bit

6218 Z2 For use on composite and solid materials with T.C.T. plunge tip.
Right hand rotation.

6218.240.50 24 50 119 25 x 55 m.E. M8
6218.240.34 24 50 119 3/4 x 55 m.E. M8
6218.300.50 30 50 118 25 x 55 m.E. M8
6218.300.34 30 50 118 3/4 x 55 m.E. M8

6419.050.00 50 x 12 x 1.7 (3 holes)
Replacement Parts
Part Number Replacement Parts D
39081-0-04060-R M4 x 6 screw For D = 24 mm
39076-0-04000-R M4 x 5.9 screw For D = 30 mm
39077-0-04015-2 TORX wrench for M4 screws (T15)
m.E. denotes adjusting screw size.
www.guhdo.com
Insert Router Bit
6242 Z1+1 For cutting composite and solid materials.
With carbide-tipped plunge point.
Part Number D L2/L3 L1 Shank Dia./Length

6242.160.30 16 30/40 107 25 x 55 m.E. M8
6242.160.34 16 30/40 107 3/4 x 55 m.E. M8
6242.180.34 18 50 115 3/4 x 55 m.E. M8
6242.180.50 18 50 115 25 x 55 m.E. M8
6242.180.35 18 50 115 3/4 x 55 m.E. M8 (LH)
6242.180.51 18 50 115 25 x 55 m.E. M8 (LH)
6242.200.30 20 30/50 110 25 x 55 m.E. M8
6242.200.34 20 30/50 110 3/4 x 55 m.E. M8
6242.200.58 20 58 120 25 x 55 m.E. M8
6242.201.34 20 58 120 3/4 x 55 m.E. M8
Technical details:
One or two edges, cutting on periphery, and one reversible T.C. centre tip for plunge
cutting, with shear angle. For mechanical feed.

6419.030.00 30 x 12 x 1.5 (4-sided)
4200.008.00 7.5 x 12 x 1.5 plunge insert 16 mm + 18 mm
4200.009.00 9 x 12 x 1.5 plunge insert 20 mm
Replacement Parts
39076-0-03500-R M3.5 screw 16 & 20 mm & 20 mm plunge
39076-0-04040-R M4.4 screw 18 mm
39081-0-03540-R M3.5 x 4 screw 16 mm plunge
39081-0-04050-R M4 x 5 screw 18 mm plunge
39077-0-04015-2 TORX wrench (T15)
(LH) denotes left hand rotation.


available upon request.
.
800-544-8436
Insert Router Bit
6239 Z1 For jointing composite and solid materials.

6239.129.50 21 50 129 25 x 55 m.E. M8
6239.129.34 21 50 129 3/4 x 55 m.E. M8
6239.139.60 21 60 139 25 x 55 m.E. M8
6239.139.34 21 60 139 3/4 x 55 m.E. M8
6239.169.50 21 50 169 MK2/M30 x 1.5
6239.178.60 21 60 178 MK2/M30 x 1.5
Technical details:
Single reversible T.C. tip, T.C. grade HW 02*, cutting on bottom and periphery, face
screw fixing. For mechanical feed.

6419.051.00 50 x 12 x 1.5
6419.060.00 60 x 12 x 1.5
Replacement Parts
Part Number Replacement Parts
39076-0-04000-R M4 large head TORX screw
39077-0-04015-2 TORX wrench (T15)

.
www.guhdo.com
6220ForZ2use on composite and solid materials withInsert Router Bit
offset inserts for chipbreakers.

6220.160.30 16 34 85 14 x 40
6220.160.31 16 34 85 1/2 x 40
6220.160.40 16 45 95 14 x 40
6220.160.41 16 45 95 1/2 x 40
6222 Z2 Same application as above.

6222.200.20 20 50 120 20 x 50 m.E. M8
6222.200.34 20 50 120 3/4 x 50 m.E. M8

Part Number Cut Length Dimensions
6419.030.00 34 mm (1) pc 30 x 12 x 1.5 (4-sided)
4200.012.00 (2) pc 12 x 12 x 1.5 (4-sided)
6419.030.00 45 mm (1) pc 30 x 12 x 1.5 (4-sided)
4200.012.00 (3) pc 12 x 12 x 1.5 (4-sided)
6419.030.00 50 mm (1) pc 30 x 12 x 1.5 (4-sided)
4200.012.00 (4) pc 12 x 12 x 1.5 (4-sided)
Replacement Parts
39076-0-04000-R M4 x 5.9 TORX screw
39077-0-04015-2 TORX wrench

.
800-544-8436
6225 Z2For use on composite and solid materialsInsert Router Bit
requiring a finish without lines.
With carbide-tipped plunge point.

6225.182.34 18 35 105 3/4 x 55 m.E.
6225.182.35 18 35 105 3/4 x 55 m.E. (LH)
6225.182.25 18 35 105 25 x 55
6225.180.25 18 55 125 25 x 55 m.E. M8
6225.180.34 18 55 125 3/4 x 55 m.E. M8
6225.181.25 18 55 125 25 x 55 m.E. M8 (LH)
6225.180.35 18 55 125 3/4 x 55 m.E. (LH)
6225.200.25 20 55 125 25 x 55 m.E. M8
6225.201.25 20 55 125 25 x 55 m.E. M8 (LH)
6225.200.34 20 55 125 3/4 x 55 m.E. M8
6225.200.35 20 55 125 3/4 x 55 m.E. (LH)
6225.220.25 22 55 125 25 x 55 m.E. M8
6225.220.34 22 55 125 3/4 x 55 m.E. M8
Technical details:
Two staggered reversible T.C. tips, 4-sided, back screw fixing. With T.C. centre tip for
plunge cutting. For manual and mechanical feed.
Application:
For grooving, jointing, trimming and rebating, for severing and apertures in solid
wood, various kinds of wood composites and boards, on stationary routers with our
without CNC control.

6419.050.00 50 x 12 x 1.7 (3-holes)
6419.030.00 30 x 12 x 1.5 (4-sided)
Replacement Parts
39076-0-04000-R M4 x 5.9 screw
39077-0-04015-2 TORX Wrench


.
www.guhdo.com
6243 Z1 Insert Router Bit with Shear
With upshear and downshear inserts.
Designed for chip-free cuts on two-sided materials.
With TCT plunge tip.

6243.160.30 16 30 110 25 x 55 m.E. M8
6243.160.31 16 30 110 25 x 55 m.E. M8 (LH)
6243.161.30 16 30 110 3/4 x 55 m.E. M8
6243.161.31 16 30 110 3/4 x 55 m.E. M8 (LH)
6243.160.50 16 50 125 25 x 55 m.E. M8
6243.160.51 16 50 125 25 x 55 m.E. M8 (LH)
6243.161.50 16 50 125 3/4 x 55 m.E. M8
6243.161.51 16 50 125 3/4 x 55 m.E. M8 (LH)
6243.180.50 18 50 125 25 x 55 m.E. M8
6243.180.51 18 50 125 25 x 55 m.E. M8 (LH)
6243.181.50 18 50 125 3/4 x 55 m.E. M8
6243.181.51 18 50 125 3/4 x 55 m.E. M8 (LH)

Part Number Dimensions L2
6243.016.00 16 x 7 x 1.5 30 mm
6243.028.00 28 x 7 x 1.5 50 mm
Replacement Parts
39081-0-03040-R M3 x 4 screw
39077-0-03009-2 TORX wrench


.
800-544-8436
Insert Router Bit with Shear
6243 Z2 Compression style, with upshear and downshear inserts.
Designed for chip-free cuts on two-sided materials.
With TCT plunge tip.

6243.020.30 20 30 110 25 x 55 m.E. M8
6243.020.34 20 30 110 3/4 x 55 m.E. M8
6243.020.35 20 30 110 3/4 x 55 m.E. M8 (LH)
6243.020.31 20 30 110 25 x 55 m.E. M8 (LH)
6243.020.50 20 50 125 25 x 55 m.E. M8
6243.021.34 20 50 125 3/4 x 55 m.E. M8
6243.020.51 20 50 125 25 x 55 m.E. M8 (LH)
6243.021.35 20 50 125 3/4 x 55 m.E. M8 (LH)
6243.030.75 30 75 145 25 x 55 m.E. M8

Part Number Dimensions L2
6243.016.00 16 x 7 x 1.5 30
6243.028.00 28 x 7 x 1.5 50
6419.040.09 40 x 9 x 1.5 75
4200.008.00 7.5 x 12 x 1.5 Plunge Insert for D = 30 mm
Replacement Parts
Part Number Replacement Parts D
39081-0-03040-R M3 x 4 screw 20 mm
39077-0-03009-2 TORX wrench (T9)
39080-0-03540-R M3.5 x 4 screw 30 mm
39081-0-04050-R M4 x 5 screw for 30 mm plunge
39077-0-04015-2 TORX wrench (T19)


.
www.guhdo.com
6244 Z2+Z2 Insert Router Bit with Shear
For right hand and left hand rotations.
Adjust Z-axis (up/down) for desired rotation.
With downshear inserts designed for chip-free cuts on single-sided materials.

6244.200.28 20 28 130 25 x 55 m.E. M8
6244.200.34 20 28 130 3/4 x 55 m.E. M8

Part Number Solid Carbide Inserts
6243.028.00 28 x 7 x 1.5
Replacement Parts
39081-0-03040-R M3 x 4 screw
39077-0-03009-2 TORX wrench


.Top insert used for right hand rotation.
Bottom insert used for left hand rotation.
800-544-8436
6223 Z1+1 Insert Router Bit
with Chipbreakers
Chipbreaker style for faster feed rates.
With upshear and downshear on two-sided materials.
Part Number D L2 L1 A Shank Dia./Length

6223.220.42 22 42 115 25 x 55 m.E. M8
6223.220.34 22 42 115 3/4 x 55 m.E. M8
6223.220.60 22 60 131 25 x 55 m.E. M8
6223.221.34 22 60 131 3/4 x 55 m.E. M8
6223.221.42 22 42 115 80 MK2/M30 x 1.5
6223.221.60 22 60 131 96 MK2/M30 x 1.5

4200.012.00 12 x 12 x 1.5
Replacement Parts
39076-0-04000-R M4 TORX screw
39077-0-04015-2 TORX wrench (T15)


.
www.guhdo.com
6226 Z1+1 Insert Router Bit
Compression style, with upshear and downshear design.
For chip-free cuts on double-sided composite material.

6226.250.34 25 44 113 3/4" x 55 m.E.
6226.250.35 25 44 113 3/4" x 55 m.E. (LH)
6226.250.44 25 44 113 25 x 55 m.E.
6226.250.45 25 44 113 25 x 55 m.E. (LH)
6226.251.34 25 66 135 3/4" x 55 m.E.
6226.251.35 25 66 135 3/4" x 55 m.E. (LH)
6226.251.66 25 66 135 25 x 55 m.E.
6226.251.67 25 66 135 25 x 55 m.E. (LH)

4200.012.00 12 x 12 x 1.5
Replacement Parts
39081-0-04050-R M4 x 5 screw
39077-0-04015-2 TORX wrench (T15)


.
800-544-8436
For grooving, jointing and rebating on composite and solid materials.

6240.400.30 40 30 99 25 x 55 m.E.
6240.400.34 40 30 99 3/4" x 55 m.E.

Part Number Dimensions Notes
4200.030.00 30 x 12 x 1.5 (two-sided) For jointing only
6419.030.00 30 x 12 x 1.5 (four-sided) For bottom cutting
Replacement Parts
39076-0-04000-R M4 x 5.9 screw
39077-0-04015-2 TORX wrench (T15)
Insert Router Bit

6241 Z2+V2 For jointing and rebating on composite and solid materials. With
spurs. Right hand rotation.
Part Number D L2 Shank Dia./Length

6241.400.34 40 30 3/4" x 55 m.E.
6241.400.30 40 30 25 x 55 m.E.
6241.600.34 60 30 3/4" x 55 m.E.
6241.600.30 60 30 25 x 55 m.E.
6241.600.54 60 50 3/4" x 55 m.E.
6241.600.50 60 50 25 x 55 m.E.

4200.030.00 30 x 12 x 1.5 (two-sided)
4200.050.00 50 x 12 x 1.5 (two-sided)
4200.014.04 14 x 14 x 2 (four-sided)
Replacement Parts
(LH) denotes left hand rotation. 39266-0-06012-R Screw for wedge
m.E. denotes adjusting screw size. 39130-0-05009-R Screw for spur M5X9

.
www.guhdo.com
Vari-Angle Insert Router Bit
4098 Z2
For jointing and for producing angled cuts in solid wood or composite materials.
Adjustable 0 to 45° up or down in 5° increments.
Part Number D D Max L2 Shank Dia./Length

4098.085.00 85 102 40 25 x 55 m.E.
4098.085.34 85 102 40 3/4" x 55 m.E.

6419.040.00 40 x 12 x 1.5 ends beveled, double-sided
4200.040.00 40 x 12 x 1.5 without ends beveled, double-sided
Replacement Parts
39070-0-06080-R M6 x 8 screw for inserts
39140-0-00501-0 Wrench SW5
39120-0-03000-0 Wrench SW3 for inserts
Vari-Angle Insert Router Bit

4099 Z2
For jointing and producing angled cuts in solid wood or composite materials.
Adjustable 0 to 45° up and 0 to 90° down in 2-1/2° increments.
Part Number D D Max L2 Shank Dia./Length

4099.085.00 85 102 40 25 x 55 m.E.
4099.085.34 85 102 40 3/4 x 55 m.E.

6419.040.00 40 x 12 x 1.5 ends beveled, double-sided
4200.040.00 40 x 12 x 1.5 without ends beveled, double-sided
Replacement Parts
39070-0-06080-R M6 x 8 screw for inserts
39165-0-05016-R M5 x 16 screw
39140-0-00401-0 wrench SW4
39120-0-03000-0 wrench SW3 for inserts

.
800-544-8436
NOVITEC Router Bit
6235 Z3
A spiral router bit designed for roughing/hogging composite materials and solid
woods. Replacement tips available in carbide and diamond with straight, 8° upshear
or 8° downshear cutting styles. The NOVITEC is supplied with straight carbide knives
unless specified otherwise.
Not recommended for finish cuts.
Part Number D L2/L3 L1 Z/AS Shank Dia./Length

6235.116.42 16 42/48 110 3/9 14 x 55
6235.116.43 16 42/48 110 3/9 14 x 55 (LH)
6235.116.56 16 56/62 125 3/12 14 x 55
6235.016.42 16 42/48 110 3/9 25 x 55 m.E.
6235.016.56 16 56/62 125 3/12 25 x 55 m.E.
6235.018.28 18 28/34 104 3/6 25 x 55 m.E.

6235.018.42 18 42/48 118 3/9 25 x 55 m.E.
6235.018.56 18 56/62 132 3/12 25 x 55 m.E.
6235.018.57 18 56/62 132 3/12 25 x 55 m.E. (LH)
6235.020.42 20 42/48 118 3/9 25 x 55 m.E.

6235.020.56 20 56/62 132 3/12 25 x 55 m.E.
6235.024.42 24 42/48 118 3/9 25 x 55 m.E.

6235.024.56 24 56/62 126 3/12 25 x 55 m.E.
6235.024.57 24 56/62 126 3/12 25 x 55 m.E. (LH)
6235.024.70 24 70/76 140 3/15 25 x 55 m.E.
6235.024.71 24 70/76 140 3/15 25 x 55 m.E. (LH)
6235.024.83 24 83/90 153 3/18 25 x 55 m.E.
6235.019.42 3/4" 42/48 105 3/9 3/4" x 50 m.E.

6235.019.56 3/4" 56/62 119 3/12 3/4" x 50 m.E.
Recommended Feedrates Features
Composites = 400"/min - Quiet cutting
Solid Woods = 325"/min - Low cutting pressure on the tool
(LH) denotes left hand rotation. - Knives can be resharpened 3 to 4 times
m.E. denotes adjusting screw size. Maximum RPM= 24,000
Z/AS denotes # of wings/total # of Solid Carbide Inserts

knives per cutter.
Part Number Cut D
Adjustment screw for Leuco PS system 6235.055.00 Straight For D = 16-20 mm, 3/4"
available upon request. 6235.055.01 8° upshear For D = 16-20 mm, 3/4"
Special sharpening fixture available 6235.055.02 8° downshear For D = 16-20 mm, 3/4"
(See spare parts). 6235.070.00 Straight For D = 24 mm
Fractional shank sizes available 6235.070.01 8° upshear For D = 24 mm
on request. 6235.070.02 8° downshear For D = 24 mm
.
www.guhdo.com
NOVITEC Router Bit
6235 Z3 Replacement Parts
Solid Carbide Plunge Tips
Part Number D Rotation
6235.000.16 For D = 16 mm RH
6235.001.16 For D = 16 mm LH
6235.000.18 For D = 18 mm RH
6235.001.18 For D = 18 mm LH
6235.000.19 For D = 3/4" RH
6235.000.20 For D = 20 mm RH
6235.001.20 For D = 20 mm LH
6235.000.24 For D = 24 mm RH
6235.001.24 For D = 24 mm LH
TORX Screws for Knives

39085-0-03055-R M3 x 5.5 (T9) For D = 16-20 mm, 3/4"
39085-0-04067-R M4 x 6.7 (T15) For D = 24 mm
TORX Screws for Plunge Tip

39084-0-03089-R M3 x 8 (T9) For D = 16-20 mm, 3/4"
39084-0-03080-R M3 x 8 (T15) For D = 22, 24 mm
Sharpening Fixture for Knives

Part Number Notes
6235.500.00 Call for information
Z/AS denotes # of wings/total # of

knives per cutter.

Special sharpening fixture available

(See spare parts).
Fractional shank sizes available

on request.
.
800-544-8436
Router Bit for Planing
4321 Z4
Insert router bit designed for use on CNC machines for planing composite materials
creating a true flat surface. The special highly-polished knives may be resharpened
several times. Tool body mounted on a shaft.
Maximum RPM= 12,000
Part Number Form D L2 L1 Shank Dia./Length

4321.080.19 A 80 11 93 3/4" x 55
4321.080.20 A 80 11 93 20 x 55
4321.080.00 A 80 11 93 25 x 55
4321.081.19 B 80 11 93 3/4" x 55
4321.081.20 B 80 11 93 20 x 55
4321.081.00 B 80 11 93 25 x 55
Form A produces chip-free finishes on the outside edges of the material.
Form B is a better all-around tool that can also be used for rebates but for use
when a lower quality finish is acceptable on the outside edges of the material.
Replacement Parts
Part Number Replacement Part Form
4321.075.00 Tool body without shaft A (75°)
4321.090.00 Tool body without shaft B (90°)
4320.011.00 Knives 11 x 11 x 4 A
6232.011.00 Knives 11 x 11 x 4 B
39084-0-03075-R M3 x 7.5 TORX screw (T10)
39077-0-03010-3 TORX wrench (T10)
39140-0-00601-0 SW 6 wrench
Arbors with SK30, ISO30, SK40 and

HSK63F available upon request.
www.guhdo.com
Multi-Use Router Bit
6245 Z2+2Multi-use router bit for boring, grooving, rebating, jointing and planing.
When boring over 10mm depths, RPM must be 12,000.

6245.350.34 35 30 90 3/4" x 55 m.E.
6245.350.30 35 30 90 25 x 55 m.E.
6245.400.34 40 30 90 3/4" x 55 m.E.
6245.400.30 40 30 90 25 x 55 m.E.
6245.600.34 60 30 105 3/4" x 55 m.E.
6245.600.30 60 30 105 25 x 55 m.E.
6245.800.34 80 12 78 3/4" x 55 m.E.
6245.800.30 80 12 78 25 x 55 m.E.

4200.012.00 12 x 12 x 1.5 Peripheral insert for D = 80
Plunge insert for D = 35 & 40
4200.020.00 20 x 12 x 1.5 Plunge insert for D = 60
4200.030.00 30 x 12 x 1.5 Plunge insert for D = 80
6419.030.00 30 x 12 x 1.5 Peripheral insert for D = 35, 40 & 60
Replacement Parts
39076-0-04000-R M4 Screw
39077-0-04015-2 TORX wrench
800-544-8436
V Groove Insert Router Bit
4320 Z1 Designed for V-grooving, bevelling and folding.
Using special inserts for producing 60° or 91° angles.
Maximum RPM= 18,000
Part Number D Deg. L2 L3 L1 Shank

4320.415.25 41.5 60° 41.5 35 118 25 x 55 m.E.
4320.415.34 41.5 60° 41.5 35 118 3/4 x 55 m.E.
4320.050.25 50 90° 36.4 25 93 25 x 55 m.E.
4320.050.34 50 90° 36.4 25 93 3/4 x 55 m.E.

Part Number Dimensions Grade Degree
4320.040.00 40 x 12 x 1.5 Standard grade For 90°
4320.041.00 40 x 12 x 1.5 D050 grade For 90°
4320.050.00 50 x 12 x 1.5 Standard grade For 60°
Replacement Parts
39076-0-04040-R M4 x 4 screw
39077-0-04015-2 TORX wrench (T15)
www.guhdo.com
45° Insert Router Bit
4322 Z2 For producing 45° angle cuts.
Tool body with two reversible T.C. tips. Cutting on periphery only. Right-hand rotation.
For mechanical feed. For bevelling in various kinds of wood composites and panel
materials on CNC machines and stationary routers.
Maximum RPM= 12,000
Part Number D Deg. L2 L3 L1 Shank Dia./Length

4322.074.34 74 45° 40 28 95 3/4 x 55 m.E.
4322.074.20 74 45° 40 28 95 20 x 55 m.E.
4322.074.25 74 45° 40 28 95 25 x 55 m.E.

4200.040.00 40 x 12 x 1.5
Replacement Parts
39076-0-04000-R M4 x 5.9 screw
39077-0-04015-2 TORX wrench (T15)
800-544-8436
4319 Z1 Decorative Insert Router Bit
For decorative grooving, lettering and engraving, rounding over of edges, etc.
Decorative insert router bit with nine standard profiles.
Special profiles available upon request.
Tempered tool body, supplied with one reversible T.C. tip for profile No. 1 as basic equipment.
T.C. tip with shear cut from top. The basic tip can be profiled on one side.
Maximum area available for profiling as per below sketch.
For mechanical feed.
Part Number D L3 A L1 Shank Dia./Length

4319.012.00 17 8.5 27 57.5 10 x 30

4200.012.00 12 x 12 x 1.5 (Profile #1)
4319.012.02 Profile #2, 3 & 4
4319.012.05 Profile #5
4319.012.06 Profile #6, 7 & 8
4319.012.09 Profile #9
4319.012.10 Profile #10
4319.012.11 Profile #11
4319.012.12 Profile #12
Replacement Parts
39081-0-04048-R TORX screw M4 x 4.8
39077-0-04015-R TORX wrench
Profiles can be customized to specifications required.
www.guhdo.com
Decorative Insert Router Bit
4322 Z1
Similar to series No. 4319 but designed to produce larger decorative profiles in solid
woods and composite materials. Profile area per shaded diagram below.
For decorative grooving, lettering, etc., as well for bevelling or rounding over of edges.
Can be profiled on one side within the available area for profiling.

4322.024.00 24 11.8 88 12 x 40
Part Number Dimensions Angle
4200.017.17 17 x 17 x 2.0 For 92° angle
4322.017.00 Special profile
Replacement Parts
39076-0-04000-R M4 screw
39077-0-04015-2 TORX screw (T15)
Profile Insert Router Bit

4096 Z1
Round nose (core box) insert router bit for producing round nose profiles in solid wood
and composite materials. For most core box and cove operations.
For use on stationary or portable routers.
Tool body with one replaceable circular T.C. tip. For manual and mechanical feed.
Right-hand rotation.
Part Number D R L2 Shank Dia.

4096.127.63 1/2 1/4 1/4 1/4
4096.127.12 1/2 1/4 1/4 1/2
4096.160.63 5/8 5/16 5/16 1/4
4096.160.12 5/8 5/16 5/16 1/2
4096.190.63 3/4 3/8 3/8 1/4
4096.190.12 3/4 3/8 3/8 1/2
Four-times the tool life:
Just by unscrewing the clamping screw and turning the circular tip your can easily change over
to a new ready-for-operation area once a part of the tip has become blunt or damaged.

Part Number Radius
4096.635.00 1/4"
4096.080.00 5/16"
4096.953.00 3/8"
Tool body price does not include inserts.
Tool body supplied with one reversible T.C.

Replacement Parts
tip for 92° decorative grooves or 46° bevels. Part Number Replacement Parts
39082-0-03565-0 M3.5 x 6.5 screw
39077-0-04015-1 TORX wrench (T15)
800-544-8436
4097 Z2 Profile Insert Router Bit
Router bit designed to produce various profiles using the standard inserts shown below.
Special profiles available upon request.
Can be supplied with a bearing.
Part Number D R L2 d2 S
4097.026.63 26 2-5 19.5 16-22 1/4"
4097.026.12 26 2-5 19.5 16-22 1/2"
4097.032.63 32 6-8 26 16-20 1/4"
4097.032.12 32 6-8 26 16-20 1/2"
4097.036.63 36 10 30 16 1/4"
4097.036.12 36 10 30 16 1/2"
Basic tool body with interchangeable shank, screws for tips and covering screw. To be used in
conjunction with tips for beading, rebating, bevelling, coving, with standard or special profiles.
Round Over Inserts

Part Number Radius Size
4097.195.02 2 19.5 x 9 x 1.5
4097.195.03 3 19.5 x 9 x 1.5
4097.195.04 4 19.5 x 9 x 1.5
4097.195.05 5 19.5 x 9 x 1.5
4097.195.06 6 26 x 12.5 x 1.5
4097.195.08 8 26 x 12.5 x 1.5
4097.195.10 10 30 x 14.5 x 1.5
Cove Inserts
Part Number Radius Size
4097.196.05 5 19.5 x 9 x 1.5
4097.027.06 6 26 x 12.5 x 1.5
4097.027.08 8 26 x 12.5 x 1.5
4097.031.10 10 30 x 14.5 x 1.5
Straight and Bevel Inserts

Part Number Straight/Bevel Size
4097.195.00 4-sided straight 19.5 x 9 x 1.5
4097.026.00 4-sided straight 26 x 12.5 x 1.5
4097.030.00 4-sided straight 30 x 14.5 x 1.5
4097.197.05 45° Bevel, L3 = 5mm 19.5 x 9 x 1.5
4097.197.08 45° Bevel, L3 = 8mm 26 x 12.5 x 1.5
Metric shank sizes also available.
4097.197.10 45° Bevel, L3 = 10mm 30 x 14.5 x 1.5
Supplied without tips and without
guide set.
www.guhdo.com
6976 Z2 Radius/Chamfer Insert Router Bit
For producing radius and chamfers on the top and bottom edges of composite and
solid materials. For one-or both-side rounding over or bevelling operations in solid
wood or various kinds of panel materials on stationary routers or CNC machines.
Maximum RPM= 18,000
Part Number Radius/Deg. D L1 Shank Dia./Length

6976.040.02 2 40 100 16 x 60 m.E.
6976.040.03 3 40 100 16 x 60 m.E.
6976.040.04 4 40 100 16 x 60 m.E.
6976.040.05 5 40 100 16 x 60 m.E.
6976.040.45 45° 40 100 16 x 60 m.E.
Maximum material thickness: 50mm (2")

Part Number Dimensions Radius/Deg.
6976.015.02 15 x 18 x 2 2
6976.015.03 15 x 18 x 2 3
6976.015.04 15 x 18 x 2 4
6976.015.05 15 x 18 x 2 5
6976.015.45 15 x 18 x 2 45°
Replacement Parts
39081-0-04050-R M4 x 5 screw
39077-0-04015-2 TORX wrench (T15)
800-544-8436
4330 Z2 Combination Insert Router Bit
A three piece cutterset with spacers mounted on adapter No. 6371, 6374 & 6377 for jointing,
chamfering and rounding profiles in composite and solid wood materials. Interchangeable cut-
ters to produce the desired shapes indicated below. With this tool set it is possible to combine
jointing cutters, rounding over cutters and bevel cutters in various ways. In conjunction with dif-
ferent shank type arbors, the set can be used on all stationary routers and CNC machines of
common use.
Adaption to the thickness of material to be worked through face ground spacers.
Maximum RPM= 12,000
Table to determine cutters required based on material thickness:

Jointing Cutter L2
Edge Profile
25 40 50
Size 1 Material Thickness Material Thickness Material Thickness
R = 3mm 13 - 29 23 - 44 33 - 54
R = 4mm 13 - 31 23 - 46 33 - 56
R = 5mm 13 - 33 23 - 48 33 - 58
3 x 45° 8 - 29 18 - 44 28 - 54
Size 2
R = 6mm 19 - 35 29 - 50 39 - 54
R = 8mm 19 - 39 29 - 54 39 - 58
3 x 45° 8 - 29 18 - 44 28 - 54
Size 3
R = 10mm 28 - 44 38 - 59 48 - 69
R = 12mm 28 - 48 38 - 63 48 - 73
3 x 45° 8 - 29 18 - 44 28 - 54
Table to determine adapter spindle/clamping (L2) length:
Arbors Jointing Cutter L2

Radius/Chamfer Cutter 25 40 50
R 3, R 4, R 5, 45° L2 = 40 55 70
R 6, R 8, 45° 55 70 70
R 10, R 12, 45° 55 70 70
Ring Set
Set consisting of 5.5 x 5.0/2 x 2.0/4 x 1.0/3 x 0.5/5 x 0.1
mm spacers. The spacer set is sufficient for materials of
any thickness and all clamping lengths.
Part Number d D2 Key Size

39548-0-00001-1 20 35 6 x 1.5
www.guhdo.com
4330 Z2 Individual Cutters
for Combination Insert Router Bit
Part Number Cutter Radius/Degree Cutter Size

4330.080.25 Jointing -- 80 x 25 x 20
4330.080.40 Jointing -- 80 x 40 x 20
4330.080.50 Jointing -- 80 x 50 x 20
Size 1
4330.092.20 Rounding 2 92 x 15 x 20
4330.092.30 Rounding 3 92 x 15 x 20
4330.092.40 Rounding 4 92 x 15 x 20
4330.092.50 Rounding 5 92 x 15 x 20
4330.092.45 Bevelling 45° 92 x 15 x 20
Size 2
4330.098.60 Rounding 6 98 x 22 x 20
4330.098.80 Rounding 8 98 x 22 x 20
4330.098.45 Bevelling 45° 98 x 22 x 20
Size 3
4330.106.10 Rounding (top) 10 106 x 17.5 x 20
4330.106.12 Rounding (top) 12 106 x 17.5 x 20
4330.106.45 Bevelling (top) 45° 106 x 17.5 x 20
Size 3
4330.106.11 Rounding (bottom) 10 106 x 17.5 x 20
4330.106.13 Rounding (bottom) 12 106 x 17.5 x 20
4330.106.46 Bevelling (bottom) 45° 106 x 17.5 x 20
800-544-8436
4330 Z2 for Combination Insert Router Bit
Jointing Tips
Part Number Dimensions Cutter
4200.025.00 25 x 12 x 1.5 25mm jointing cutter
Bevelling Tips
Part Number Dimensions Radius/Degree
4330.015.45 15 x 18 x 2 45°, L3 = 6mm (Size 1)
4330.022.45 22 x 21 x 2 45°, L3 = 9mm (Size 2)
4330.175.45 17.5 x 26 x 2 45°, L3 = 13mm (top - size 3)
4330.175.46 17.5 x 26 x 2 45°, L3 = 13mm (bottom - size 3)
Rounding Over Tips

Part Number Dimensions Radius/Deg.
4330.015.02 15 x 18 x 2 R = 2 (Size 1)
4330.015.03 15 x 18 x 2 R = 3 (Size 1)
4330.015.04 15 x 18 x 2 R = 4 (Size 1)
4330.015.05 15 x 18 x 2 R = 5 (Size 1)
4330.022.06 22 x 21 x 2 R = 6 (Size 2)
4330.022.08 22 x 21 x 2 R = 8 (Size 2)
4330.175.10 17.5 x 26 x 2 R = 10 (top - size 3)
4330.175.12 17.5 x 26 x 2 R = 12 (top - size 3)
4330.175.11 17.5 x 26 x 2 R = 10 (bottom - size 3)
4330.175.13 17.5 x 26 x 2 R = 12 (bottom - size 3)
www.guhdo.com
Radius/Chamfer Router Bit
6975 Z2 with Adjustable Thickness
An adjustable insert router bit designed to joint, radius and chamfer top and bottom edges of
composite and solid materials. Special inserts available for 1/2" and 5/8" thick material.
Maximum RPM= 18,000
Size 1 D = 28 - 34
Part Number D d2 R L1 Shank Dia./Length
6975.285.23 28 - 34 20 3 - 6 & 45° 113 3/4" x 55 m.E.
6975.286.23 28 - 34 20 3 - 6 & 45° 113 20 x 55 m.E.
6975.280.23 28 - 34 20 3 - 6 & 45° 113 25 x 55 m.E.
6975.285.24 28 - 34 20 3 - 6 & 45° 113 3/4" x 55 m.E. (LH)
6975.280.24 28 - 34 20 3 - 6 & 45° 113 25 x 55 m.E. (LH)
6975.281.23 28 - 34 20 3 - 6 & 45° 144 MK2/M30 x 1.5
Solid Carbide Inserts for Size 1

Radius (Rounding Over) Knives
Part Number Dimensions Radius Notes
6975.040.03 40 x 17.2 x 2.2 R=3 Top
6975.041.03 40 x 17.2 x 2.2 R=3 Bottom
6975.040.04 40 x 18.2 x 2.2 R=4 Top
6975.041.04 40 x 18.2 x 2.2 R=4 Bottom
6975.040.05 40 x 19.2 x 2.2 R=5 Top
6975.041.05 40 x 19.2 x 2.2 R=5 Bottom
6975.040.06 40 x 20.2 x 2.2 R=6 Top
6975.041.06 40 x 20.2 x 2.2 R=6 Bottom
Chamfer (Bevelling) Knives

Part Number Dimensions Deg. Notes
6975.040.45 40 x 20.2 x 2.2 45° Top
6975.041.45 40 x 20.2 x 2.2 45° Bottom
Blanks for Special Profiles

6975.040.00 40 x 20.8 x 2.2 Blank Insert
6975.040.10 40 x 20.8 x 2.2 Top (Special Profile)
m.E. denotes adjusting screw size. 6975.040.20 40 x 20.8 x 2.2 Bottom (Special Profile)
See next page for replacement

parts.
.
800-544-8436
Radius/Chamfer Router Bit
6975 Z2 with Adjustable Thickness
composite and solid materials. Special inserts available for 1/2" and 5/8" thick material.
Maximum RPM= 12,000
D = 49 - 57
Size 2
Part Number D d2 R L1 Shank Dia./Length
6975.490.06 49 - 57 35 6 - 10 & 45° 150 25 x 55 m.E.
6975.491.06 49 - 57 35 6 - 10 & 45° 150 25 x 55 m.E. (LH)
Solid Carbide Inserts for Size 2

Radius (Rounding Over) Knives
Part Number Dimensions Radius Notes
6975.050.06 50 x 20.3 x 2.2 R=6 Top
6975.051.06 50 x 20.3 x 2.2 R=6 Bottom
6975.050.08 50 x 20.3 x 2.2 R=8 Top
6975.051.08 50 x 20.3 x 2.2 R=8 Bottom
6975.050.10 50 x 20.3 x 2.2 R = 10 Top
6975.051.10 50 x 20.3 x 2.2 R = 10 Bottom
Chamfer (Bevelling) Knives
Part Number Dimensions Degree D

6975.050.45 50 x 20.3 x 2.2 45° D = 49 - 57
6975.051.45 50 x 20.3 x 2.2 45° D = 49 - 57
Replacement Parts (All Sizes)

39076-0-04000-R M4 Screw
39077-0-04015-2 TORX Wrench (T15)

www.guhdo.com
4336 Z2 Radius/Chamfer Router Bit
with Adjustable Thickness
composite and solid materials. Supplied with an aluminum body mounted on an adaptor. For right
and left hand rotations.
Maximum RPM= 12,000
Part Number D L2 h L3 Shank Dia./Length

4336.085.30 85 50 20 - 45 45 SK30
4336.085.31 85 50 20 - 45 45 SK30 (SCM/Morbidelli)
4336.085.40 85 50 20 - 45 45 SK40
4336.085.63 85 50 20 - 45 45 HSK63F
4336.085.25 85 50 20 - 45 -- 25 x 55 m.E.
4336.085.34 85 50 20 - 45 -- 3/4" x 55 m.E.
Spare Parts / Accessories

Part Number Solid Carbide Inserts Notes
6419.050.00 50 x 12 x 1.7 3 holes
4336.000.45 Chamfer knives 45°
4336.000.15 Radius knives R = 1.5 mm
4336.085.50 Aluminum body 85 x 50 x 20 kn z=2

39076-0-04000-R M4 screw (T15)
39085-0-06035-R M6 x 35 screw (T15)
39077-0-04015-2 TORX wrench (T15)
50 mm inserts with alternating shear.

Aluminum body for weight reduction.
800-544-8436
4336 Z2+2 Radius/Chamfer Router Bit
with Adjustable Thickness
composite and solid materials up to 75 mm. Supplied with an aluminum body mounted on an
adaptor. For right and left hand rotations.
Maximum RPM= 12,000
Part Number D L2 h L3 Shank Dia./Length

4336.185.30 85 76 45 - 75 45 SK30
4336.185.31 85 76 45 - 75 45 SK30 (SCM/Morbidelli)
4336.185.40 85 76 45 - 75 45 SK40
4336.185.63 85 76 45 - 75 45 HSK63F
4336.185.25 85 76 45 - 75 45 25 x 55 m.E.
4336.185.34 85 76 45 - 75 45 3/4" x 55 m.E.
Spare Parts / Accessories

Part Number Solid Carbide Inserts Notes
4200.040.00 40 x 12 x 1.5
4336.000.45 Chamfer knives 45°
4336.086.40 Aluminum body 85 x 40 x 20 top
4336.085.41 Aluminum body 85 x 40 x 20 bottom

39076-0-04000-R M4 screw (T15)
39085-0-06035-R M6 x 35 screw (T15)
39077-0-04015-2 TORX wrench (T15)
Aluminum body for weight reduction.
www.guhdo.com
Router Bit for Jointing
4337 Z2
Compression style, with upshear and downshear inserts designed for chip-free cuts on
two-sided materials. Supplied with an aluminum body mounted on an adaptor.
For right and left hand rotations.
Maximum RPM= 12,000

4337.085.30 85 56 45 SK30
4337.085.40 85 56 45 SK40
4337.085.31 85 56 45 SK30 (SCM/Morbidelli)
4337.085.63 85 56 45 HSK63F
4337.085.25 85 56 ---- 25 x 55 m.E.
4337.085.34 85 56 ---- 3/4" x 55 m.E.

4200.030.00 30 x 12 x 1.5
4337.085.55 85 x 55 x 20 kn z=2 Aluminum body
Replacement Parts
39076-0-04000-R M4 screw (T15)
39077-0-04015-2 TORX wrench (T15)
For jointing and panel sizing on CNC

machines.
Aluminum body weight for reduction.
800-544-8436
Custom Profile Insert Router Bit
4095 Z1
For cutting inside door profiles, rosettes, etc. Uses double-sided carbide inserts that
are positioned on a shear-cutting angle for improved finishes.
Profile area per shaded diagram below.
Part Number Option D B T L1 Shank Dia.

4095.023.00 1 27 23 6.5 69 12 x 40
4095.023.34 1 27 23 6.5 115 3/4" x 60 m.E.
4095.023.10 1 27 23 6.5 115 25 x 60 m.E.
4095.023.35 1 27 23 6.5 115 3/4" x 60 m.E. (LH)
4095.023.11 1 27 23 6.5 115 25 x 60 m.E. (LH)
4095.040.34 2 47 40 14 115 3/4" x 60 m.E.
4095.040.00 2 47 40 14 115 25 x 60 m.E.
4095.040.35 2 47 40 14 115 3/4" x 60 m.E. (LH)
4095.040.01 2 47 40 14 115 25 x 60 m.E. (LH)
Please send a drawing or wood sample for profile insert pricing.

Part Number Dimensions Option
4200.020.00 20 x 12 x 1.5 1 - Blank
4095.036.00 36 x 21 x 2 2 - Blank
(Template) (Per Profile)
Replacement Parts
39081-0-04060-R M4 x 6 screw for Option # 1 cutter
39076-0-04000-R M4 x 5.9 screw for Option # 2 cutter
39077-0-04015-2 TORX wrench (T15)
All inserts/profiles customized to specifications required.

Quantity discounts on profile inserts.
www.guhdo.com
Multi-Profile Insert Router Bit
4313 Z2
Number 4313 and 4316 are designed to produce various profiles using single-sided
inserts and support plates. Profile area per shaded diagram below.
Body supplied without inserts and support plates.
Part Number F L2 L1 Shank Max. RPM

4313.090.34 90 40 109 3/4" x 55 m.E. 12,000
4313.090.40 90 40 109 25 x 55 m.E. 12,000
4313.090.41 90 40 109 25 x 55 m.E. (LH) 12,000
4313.100.34 100 60 129 3/4" x 55 m.E. 9,000
4313.100.60 100 60 129 25 x 55 m.E. 9,000
Solid Carbide Inserts (Blank)

4202.040.36 40 x 36 x 2
4202.061.41 60 x 41 x 2
Support Plates (Blank)

4080.040.36 40 x 36 x 4.5
4080.061.41 60 x 41 x 4.5
Replacement Parts
39072-0-08012-R M8 x 12 screw
39140-0-00401-0 Wrench SW4

800-544-8436
4316 Z2
Number 4313 and 4316 are designed to produce various profiles using single-sided
inserts and support plates. Profile area per shaded diagram below.
Body supplied without inserts and support plates.
Part Number F L2 L1 Shank Max. RPM

4316.060.30 60 30 85 5/8" x 45 m.E. 12,000
4316.090.34 90 40 109 3/4" x 55 m.E. 12,000
4316.090.40 90 40 109 25 x 55 m.E. 12,000
4316.090.41 90 40 109 25 x 55 m.E. (LH) 12,000
4316.100.34 100 60 129 3/4" x 55 m.E. 9,000
4316.100.60 100 60 129 25 x 55 m.E. 9,000

4202.030.25 30 x 25 x 2
4202.040.36 40 x 36 x 2
4200.062.41 60 x 41 x 2

4080.030.25 30 x 25 x 4.5
4080.040.36 40 x 36 x 4.5
4080.062.41 60 x 41 x 4.5
Replacement Parts
39072-0-08012-R M8 x 12 Screw
39140-0-00401-0 Wrench SW4


(Subject to one time template charge)
Inserts available in three grades.
www.guhdo.com
4318 Z2
This cutter is designed to produce various profiles using single-sided inserts and sup-
port plates on a 45° angle. The 45° position allows for deeper profiles per examples
below. Body supplied without inserts and support plates.
Left-hand rotation available upon request.
Part Number D L2 Shank Max. RPM Z

4318.125.34 110 40 3/4" x 55 m.E. 12,000 2
4318.125.40 110 40 25 x 55 m.E. 12,000 2
4318.148.34 148 60 3/4" x 55 m.E. 8,000 2
4318.148.60 148 60 25 x 55 m.E. 8,000 2

4202.040.36 40 x 36 x 2
4202.061.41 60 x 41 x 2

4080.040.36 40 x 36 x 4.5
4080.061.41 60 x 41 x 4.5
Replacement Parts
39072-0-08012-R M8 x 12 Screw
39140-0-00401-0 Wrench SW4


800-544-8436
Multi-Profiler for Bottom Cutting
4317 Z2
This router bit is designed for inside, bottom cutting profiles that fall within the param-
eters shown below, such as profiled grooves and rosettes. Body supplied without in-
serts and support plates. Right-hand rotation.
Left-hand rotation available upon request.
Part Number F Max. P L2 L1 Shaft Max. RPM

4317.105.76 60 15 34 105 25 x 55 m.E. 18,000
4317.105.34 60 15 34 105 3/4" x 55 m.E. 18,000
4317.112.34 76 17 35 112 3/4" x 25 m.E. 12,000
4317.112.76 76 17 35 112 25 x 25 m.E. 12,000
4317.144.76 76 17 35 144 MK2/MK30 x 1.5 12,000

Part Number Dimensions Type
4202.030.35 30 x 35 x 2
4202.041.36 40 x 36 x 2 A
4202.041.37 40 x 36 x 2 B

4080.030.35 30 x 35 x 4.5
4080.040.36 40 x 36 x 4.5
Replacement Parts
39072-0-08012-R M8 x 12 Screw
(LH) denotes left hand rotation. 39140-0-00401-0 Wrench SW4
m.E. denotes adjusting screw size. All inserts/profiles customized to specifications required.

www.guhdo.com
Customizable Profile
A dedicated profile router bit with single-sided profile inserts. Designed to profile com-
posite and solid wood materials. Profile area per examples below.
Tool body price does not include profile inserts.
Maximum RPM= 18,000
Part Number F Max. D L2 F Min. Shank Dia./Length

6979.363.20 38 36 20.5 25 1/2" x 40

4207.122.19 22 x 19 x 2 Blank (solid wood)
4207.123.19 22 x 19 x 2 Profile group 1 (solid wood)
4207.222.19 22 x 19 x 2 Blank (composites)
4207.223.19 22 x 19 x 2 Profile group 1 (composites)
Replacement Parts
Quantity discounts on profile inserts. Part Number Replacement Parts
39076-0-04000-R M4 Screw
39077-0-04015-2 TORX Wrench (T15)
800-544-8436
6985 Insert Router Bit
Maximum RPM= 18,000
Part Number F Max. F Min. L2 Shank Dia./Length

6985.315.32 31.5 17 32 1/2" x 40
Replacement Parts
39081-0-03040-R M3 x 4 Screw
39077-0-04015-2 TORX Wrench (T15)

www.guhdo.com
6980 Z2 Customizable Profile
Insert Router Bit
posite and solid materials. Available in right-hand rotation and is capable of bottom-
cutting and ramp plunging.
Part Number F Max. L2 Shank Dia./Length

6980.425.30 45/55/65 30 3/4" x 55 m.E.
6980.426.30 45/55/65 30 20 x 55 m.E.
6980.420.30 45/55/65 30 25 x 55 m.E.
6980.425.40 45/55/65 40 3/4" x 55 m.E.
6980.426.40 45/55/65 40 20 x 55 m.E.
6980.420.40 45/55/65 40 25 x 55 m.E.
6980.425.50 45/55/65 50 3/4" x 55 m.E.
6980.426.50 45/55/65 50 20 x 55 m.E.
6980.420.50 45/55/65 50 25 x 55 m.E.
See below for replacement parts.
posite and solid materials. Available in right-hand rotation and is capable of bottom-
cutting and ramp plunging.
Part Number F Max. L2 Shank Dia./Length

6987.665.70 71 70 3/4" x 55 m.E.
6987.666.70 71 70 20 x 55 m.E.
6987.667.70 71 70 25 x 55 m.E.

m.E. denotes adjusting screw size. Replacement Parts
39076-0-04000-R M4 TORX Screw
39077-0-04015-3 TORX Wrench (T15)
800-544-8436
posite and solid materials. Profile area per examples below.
Maximum RPM= 12,000
Part Number F Max. D L2 F Min. Shank Dia./Length

6986.485.40 51 48 38.5 41 3/4" x 55 m.E.
6986.486.40 51 48 38.5 41 20 x 55 m.E.
6986.487.40 51 48 38.5 41 25 x 55 m.E.

4207.252.40 40 x 25.5 x 2 Blank (solid wood)
4207.253.40 40 x 25.5 x 2 Profile group 1 (solid wood)
4207.252.40 40 x 25.5 x 2 Blank (composites)
4207.253.40 40 x 25.5 x 2 Profile group 1 (composites)
Replacement Parts
m.E. denotes adjusting screw size. 39076-0-04000-R M4 TORX Screw
39077-0-04015-3 TORX Wrench (T15)
Quantity discounts on profile inserts. All inserts/profiles customized to specifications required.
www.guhdo.com
Insert Router Bit
A dedicated profile router bit with single-sided profile inserts.
Designed to profile composite and solid materials.
Capable of bottom-cutting and ramp plunging.
For use when a small minimum tool diameter is required, 19 mm.
Part Number F Max. D L2 Shank Dia./Length Max. RPM

6981.312.30 34 31 30 12 x 40 18,000
6981.313.30 34 31 30 1/2" x 40 18,000
6981.315.30 34 31 30 3/4" x 55 m.E. 18,000
6981.310.30 34 31 30 25 x 55 m.E. 18,000
6981.412.40 53 41 40 12 x 40 12,000
6981.413.40 53 41 40 1/2" x 40 12,000
6981.415.40 53 41 40 3/4" x 55 m.E. 12,000
6981.410.40 53 41 40 25 x 55 m.E. 12,000
For cutting decorative profiles for furniture and door production as well as for ceiling
and wall panelling, etc. on stationary routers and CNC machines.
A dedicated profile router bit with single-sided profile inserts.
Designed to profile composite and solid materials.
Capable of bottom-cutting and ramp plunging.
For use when a small minimum tool diameter is required, 10 mm.
Part Number F Max. D L2 Shank Dia./Length Max. RPM

6982.282.25 30 28 25 12 x 40 18,000
6982.283.25 30 28 25 1/2" x 40 18,000
6982.285.25 30 28 25 3/4" x 55 m.E. 18,000
6982.280.25 30 28 25 25 x 55 m.E. 18,000
For cutting decorative profiles for furniture and door production as well as for ceiling and wall
panelling, etc. on stationary routers and CNC machines.
Replacement Parts
39076-0-04000-R M4 TORX Screw
39077-0-04015-3 TORX Wrench
800-544-8436
6984 Z2 Profile Insert Router Bit
A dedicated profile router bit with single-sided profile inserts positioned at a 30°
angle. Designed to profile composite and solid materials.
Profile area per examples below.
Maximum RPM= 12,000
Part Number F Max. D L2 Shank Dia./Length

6984.705.40 81/89 76 40 3/4" x 55 m.E.
6984.700.40 81/89 76 40 25 x 55 m.E.
Replacement Parts
39076-0-04000-R M4 TORX Screw
39077-0-04015-3 TORX Wrench


www.guhdo.com
Insert Router Bit
Maximum RPM= 18,000

6988.975.40 105 102 38 3/4" x 55 m.E.
6988.976.40 105 102 38 20 x 55 m.E.
6988.977.40 105 102 38 25 x 55 m.E.
Maximum RPM= 18,000

6988.975.40 105 102 38 3/4" x 55 m.E.
6988.976.40 105 102 38 20 x 55 m.E.
6988.977.40 105 102 38 25 x 55 m.E.

Replacement Parts
Quantity discounts on profile inserts. Part Number Replacement Parts
39076-0-04000-R M4 TORX Screw
39077-0-04015-3 TORX Wrench
800-544-8436
6989 Z2
Maximum RPM= 6,000

6989.141.40 144 141 38 25 x 55 m.E.

4207.040.66 40 x 66 x 2 Blank
4207.041.66 40 x 66 x 2 Profile
Replacement Parts
39076-0-04000-R M4 TORX Screw
39077-0-04015-3 TORX Wrench


www.guhdo.com
6991 Z2
Maximum RPM= 12,000
Part Number F Max. D P Shank Dia./Length

6991.900.40 80 90 32 3/4" x 55 m.E.
6991.900.41 80 90 32 25 x 55 m.E.
Replacement Parts
39076-0-04000-R M4 TORX Screw
39077-0-04015-3 TORX Wrench


800-544-8436
4325 Z2 Raised Panel Insert Router Bit
A dedicated router bit with single-sided profile inserts. Designed to profile
composite and solid materials for deeper and wider profiles. Also available
with an optional panel trim attachment for trimming panels to size. Raised
panel insert with shear angle.
Profile area per examples below.
Part Number D F L2 L1 T Shank Dia./Length

4325.112.19 108 112 28 97 46 3/4" x 50 m.E.
4325.112.20 108 112 28 97 46 20 x 50 m.E.
4325.112.00 108 112 28 97 46 25 x 50 m.E.

Part Number Dimensions Type Notes
4207.050.30 50 x 30 x 2.0 Blank Raised Panel Insert
4207.051.30 50 x 30 x 2.0 Profiled Raised Panel Insert
4200.012.00 12 x 12 x 1.5 Panel Trim Insert
Part Number Part

4325.220.80 Panel Trim Attachment
(LH) denotes left hand rotation. Replacement Parts

Part Number Replacement Part
Quantity discounts on profile inserts. 39076-0-04040-R M4 TORX Screw (for inserts)
39077-0-04015-2 TORX Wrench (T15)
39165-0-04020-R M4 x 20 screw (to secure panel trim)
39140-0-00302-0 Wrench (SW3) (for M4 screw)
www.guhdo.com
Raised Panel Insert Router Bit
4326 Z2
A dedicated router bit with single-sided profile inserts. Raised panel inserts with shear angle.
Profile area per examples below. Optional panel trim attachment for trimming panels to size.
Part Number F Max F Min L1 T Max Shank Dia./Length

4326.150.00 150 130 98 64 25 x 55 m.E.

4207.070.30 70 x 30 x 2 Blank
4207.071.31 70 x 30 x 2 Profiled
4200.012.00 12 x 12 x 1.5 Panel Trim Insert
Part Number Part

4325.220.80 Panel Trim Attachment
Replacement Parts
39076-0-04040-R M4 TORX Screw (for inserts)
39077-0-04015-2 TORX Wrench (T15)
39165-0-04020-R M4 x 20 screw (to secure panel trim)
39140-0-00302-0 Wrench (SW3) (for M4 screw)


800-544-8436
Customizable Bottom Cutting Profiler
6995
Tool body for two profiled interchangeable T.C. knives, with shear angle. For mechanical feed.
Right-hand rotation. The interchangeable knives can be profiled according to opposite illustra-
tions. The profile of body will be adapted in each case to the appropriate profile of knife. The
interchangeable knives have to be ordered additionally.
Part Number F Max D L2 Shank

6995.004.74 77 74 43 3/4" x 55 m.E. M8
6995.005.74 77 74 43 20 x 55 m.E. M8
6995.006.74 77 74 43 25 x 55 m.E. M8

Part Number Dimensions Type Notes
72530-6-50300-R 50 x 30 x 2 Unprofiled Standard Grade
72546-6-50301-R 50 x 30 x 2 Profiled Standard Grade
72531-6-50300-R 50 x 30 x 2 Unprofiled For Solid Wood
72546-6-50041-R 50 x 30 x 2 Profiled For Solid Wood


www.guhdo.com
Customizable Profile Insert Router Bit
6994
Tool body for two profiled interchangeable T.C. knives, with synthetic fit. For mechanical feed.
Right-hand rotation. The interchangeable T.C. knives can be profiled according to opposite il-
lustrations. The profile of body will be adapted in each case to the appropriate profile of the
knife. The interchangeable knives have to be ordered separately. For cutting deep, on both
sides closed profiles, e.g. bull nose profiles up to R = 25 mm.
Maximum RPM= 12,000
Part Number F Max F Min Shaft

6994.004.90 90 40 3/4" x 55 m.E. M8
6994.005.90 90 40 20 x 55 m.E. M8
6994.006.90 90 40 25 x 55 m.E. M8
6994.004.77 77 40 3/4" x 55 m.E. M8
6994.005.77 77 40 20 x 55 m.E. M8
6994.006.77 77 40 25 x 55 m.E. M8

Part Number Dimensions Design Packaging Unit
72534-6-60400-R 60 x 40 x 2 Blank 2
72534-6-60401-R 60 x 40 x 2 Profile 2
Replacement Parts
Part Number Replacement Parts Dimensions Packaging Unit
39076-0-04000-R TORX Screw M4 x 5.9 (T15) 10
39077-0-04015-2 TORX Screwdriver T15 1


800-544-8436
Customizable Profile Cutter
6993 for T.C. knives
Tool body for two profiled interchangeable T.C. knives. Shear angle design. Right-hand rota-
tion. For mechanical feed. The profile of body will be adapted in each case to the appropriate
profile of knife. The interchangeable knives have to be ordered separately. For cutting decora-
tive profiles for furniture and door production as well as for ceiling and wall panelling, etc. on
stationary routers and CNC machines. Especially applicable when cutting large depth profiles.
Maximum RPM= 12,000
Part Number F Max R L2 Shaft

6993.205.40 100 15-20 40 20 x 55 m.E. M8
6993.206.40 100 15-20 40 25 x 55 m.E. M8
6993.305.50 120 25-30 50 20 x 55 m.E. M8
6993.306.50 120 25-30 50 25 x 55 m.E. M8
6993.005.40 105/110 ---- 40 20 x 55 m.E. M8
6993.006.40 105/110 ---- 40 25 x 55 m.E. M8
6993.005.50 125/130 ---- 50 20 x 55 m.E. M8
6993.006.50 125/130 ---- 50 25 x 55 m.E. M8
6993.505.40 105/110 ---- 40 20 x 55 m.E. M8
6993.506.50 105/110 ---- 40 25 x 55 m.E. M8
6993.505.50 125/130 ---- 50 20 x 55 m.E. M8
6993.606.50 125/130 ---- 50 25 x 55 m.E. M8

72538-6-00015-R 40 x 25 x 2 R 15 mm
72538-6-00020-R 40 x 25 x 2 R 20 mm
72538-6-00025-R 50 x 25 x 2 R 25 mm
72538-6-00030-R 50 x 25 x 2 R 30 mm
72530-6-40251-R 40 x 25 x 2 Profile
72530-6-40301-R 40 x 30 x 2 Profile
72530-6-50251-R 50 x 25 x 2 Profile
72530-6-50301-R 50 x 30 x 2 Profile
72530-6-40250-R 40 x 25 x 2 Blank
72530-6-40300-R 40 x 30 x 2 Blank
72530-6-50250-R 50 x 25 x 2 Blank
72530-6-50300-R 50 x 30 x 2 Blank
Replacement Parts
Part Number Replacement Parts Dimensions Packaging Unit
39076-0-04000-R TORX Screw M4 x 5.9 (T15) 10
m.E. denotes adjusting screw size. 39077-0-04015-2 TORX Screwdriver T15 1
www.guhdo.com
Customizable Profile Cutter
6996 for T.C. knives
Designed for large, roundover profiles of edges, table tops, etc.
Part Number F Max D L2 Shaft

6996.305.30 80 78 30 20 x 55 m.E. M8
6996.306.30 80 78 30 25 x 55 m.E. M8
Solid Carbide Inserts (Special Profile)

72530-6-30250-R 30 x 25 x 2 Blank
72537-6-30251-R 30 x 25 x 2 Profile
Replacement Parts
39076-0-04040-R M4 TORX Screw (for inserts)
39077-0-04015-2 TORX Wrench (T15)


800-544-8436
Customizable Bottom Cutting Profiler
6997 Z2+2
Tool body of high-quality light metal. Two upper and lower staggered profiled interchangeable
T.C. knives, with shear angle. For mechnical feed. Right-hand rotation. The profile of the body
will be adapted in each case to the appropriate profile of knife. The interchangeable knives
have to be ordered additionally. Especially applicable for large profile depth on closed profils,
e.g. table edge profiles. Through staggered knife position optimum cutting edge geometry on
top and bottom for perfect surface quality, also across the grain.
Part Number F Max D F Min Shaft Body

6997.006.38 157 38 31 25 x 55 m.E. M8 Profiled
6997.706.38 157 38 31 25 x 55 m.E. M8 Unprofiled

72530-6-70300-R 70 x 30 x 2 Blank
72442-6-70301-R 70 x 30 x 2 Profile
72530-6-25250-R 25 x 25 x 2 Blank
72442-6-25251-R 25 x 25 x 2 Profile
Replacement Parts
39076-0-04000-R M4 TORX Screw
39077-0-04015-2 TORX Wrench (T15)



CNC Insert Tooling

Uploaded by

Copyright:

Available Formats

CNC Insert Tooling

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

CNC Insert Tooling

Uploaded by

Copyright:

Available Formats

What are CNC insert tooling used for?

What are CNC insert tooling used for?

What are some of the different types of inserts listed?

What are some of the different types of inserts listed?

CNC Insert Tooling

Replacement wedges available upon request.

Part Number D L2 L1 Shank

Solid Carbide Inserts

Maximum RPM = 18,000

Part Number D L2 L1 Shank Dia./Length

Solid Carbide Inserts

Part Number D L2 L1 Shank Dia./Length

Solid Carbide Inserts

(LH) denotes left hand rotation. Replacement Parts

Maximum RPM = 18,000

Part Number D L2 L1 Shank Dia./Length

Solid Carbide Inserts

Insert Router Bit

Part Number D L2 L1 Shank Dia./Length

Solid Carbide Inserts

m.E. denotes adjusting screw size.

Part Number D L2/L3 L1 Shank Dia./Length

Solid Carbide Inserts

(LH) denotes left hand rotation.

Adjustment screw for Leuco PS system

Part Number D L2 L1 Shank Dia./Length

Solid Carbide Inserts

m.E. denotes adjusting screw size.

Adjustment screw for Leuco PS system

Part Number D L2 L1 Shank Dia./Length

6222 Z2 Same application as above.

Part Number D L2 L1 Shank Dia./Length

Solid Carbide Inserts

(LH) denotes left hand rotation.

Part Number D L2 L1 Shank Dia./Length

Solid Carbide Inserts

(LH) denotes left hand rotation.

Adjustment screw for Leuco PS system

Part Number D L2 L1 Shank Dia./Length

Solid Carbide Inserts

(LH) denotes left hand rotation.

Adjustment screw for Leuco PS system

Part Number D L2 L1 Shank Dia./Length

Solid Carbide Inserts

(LH) denotes left hand rotation.

Adjustment screw for Leuco PS system

Part Number D L2 L1 Shank Dia./Length

Solid Carbide Inserts

(LH) denotes left hand rotation.

Adjustment screw for Leuco PS system

Part Number D L2 L1 A Shank Dia./Length

Solid Carbide Inserts

(LH) denotes left hand rotation.

Adjustment screw for Leuco PS system

Part Number D L2 L1 Shank Dia./Length

Solid Carbide Inserts

(LH) denotes left hand rotation.

Adjustment screw for Leuco PS system

Part Number D L2 L1 Shank Dia./Length

Solid Carbide Inserts