Alphaair 450: Uav Lidar Solutions

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

AlphaAir 450

UAV LiDAR SOLUTIONS

MAPPING
& GEOSPATIAL
THE BEST COST-
PERFORMANCE UAV
LiDAR IN CLASS
The CHCNAV AlphaAir 450 is very likely the best UAV LiDAR solution with integrated Livox Avia. The
AlphaAir 450 is a major breakthrough in the democratization of mobile mapping technology, allowing its
use by non-professional users in the geospatial reality capture industry and to those who have never
been able to access such technology before. The AlphaAir 450 is the next generation of CHCNAV
LiDAR solutions, which are widely used for power line inspection, topographic mapping, emergency
response, agricultural and forestry surveys, and more. This all-in-one, lightweight and rugged system
integrates a high-performance laser scanner with an industrial-grade professional 26 MP camera and a
high-precision inertial navigation system for quality data collection.

LIGHTEST UNIT IN CLASS EFFICIENT SCANNING


T he A lpha A ir is t he late st UAV- base d Thanks to the high-performance Livox Avia
LiDAR system with Livox Avia scanner and laser scanner, users will benefit from long-
integrated high-resolution camera launched range scanning up to 450 m with a great
by CHCNAV in the market. The LiDAR's points' density on the measured surface. At a
weight is a constraint for any UAV. The drone flying height of 100 m and a velocity of UAV
needs to lift the entire payload, as otherwise 10 m/s, a single flight with a DJI M300 and
no data acquisition is possible! The lighter the AlphaAir 450 can collect data covering
the unit, the greater the productivity as the about 2 km 2 area with more than 200 pts/m 2
UAV can fly longer. density.

ADVANCED ACCURACY FLEXIBLE INTEGRATION


The Alpha Air 450 combines industrial - The AlphaAir 450 supports a variety of UAV
grade GNSS and high-precision IMU. The platforms. With its integrated Skyport, it is
high-accuracy INS is pivotal to collect high fully compatible with a direct connection
quality LiDAR data because without it, your to the DJI M300. In addition, it can easily
point cloud would be nothing more than an be installed on our CHCNAV BB4, VTOL
arbitrary collection of points. This allows and other multi-rotor UAVs with a shock
the AA450 to deliver an absolute accuracy absorbing mounting platform. Alternatively,
of 5 to 10 cm. To further improve accuracy the AlphaAir 450 can also be fitted to any
and precision, users can apply adjustment third-party UAV that can carry its weight:
algorithms in the CoPre software. multi-rotor or fixed-wing VTOL UAVs.

INDUSTRIAL RELIABILITY QUICK ROI


AlphaAir 450 users can rely on a high level The AlphaAir 450 is a worldwide breakthrough
of protection (IP64) and extended operating in the democratization of 3D mobile mapping
temperature performance (down to -20°C technology. It means that it addresses not
and up to +50°C) in any field environment, only UAV LiDAR survey experts, but also
as one never knows what the weather or site users who had no access to this technology
conditions will be like the day of the survey before, due to high investments and
mission. complicated workflow, which is not the case
with the AA450.

CHCNAV · ALPHAAIR 450


AIRBORNE
SURVEYING

Integrated DJI Skyport One touch to start Easy data transfer All-in-one SW
AlphaAir 450 has built-in Skyport The LEDs and speaker indicate The 256 GB memory enough for CHC CoPre SW processes the
interface for direct connection to the AA450's status and there is 10 projects. 160 Mb/s highspeed AA450 trajectory with additional
DJI M300 and M210 V2 UAVs. only one button to operate, no data transfer via USB Type-C data alignment. No longer need to
parameter settings are required. without powering the unit. invest in costly 3rd party SW.

CHCNAV · ALPHAAIR 450


SPECIFICATIONS
General system performance Environmental
Absolute accuracy <10 cm Hz Operating temperature -20°C ~ +50°C
<5 cm V
Storage temperature -20°C ~ +65°C
Accuracy conditions Without control points, @50 m flight
IP rating IP64
altitude AGL
Humidity (operating) 80%, non-condensing
Mounting Skyport for DJI M300
External power source with the dedicated Electrial
port for other UAVs
(CHCNAV Alphaport interface) Input voltage DC 12 ~ 14 V
Power consumption 32 W, min. 2A
Weight of instrument (1)
0.95 kg
Power source Depending on UAV battery, or by Skyport
Dimensions of instrument 12.8 × 12.8 × 6.75 cm
from DJI M300
5.04" × 5.04" × 2.65"
* Specifications are subject to change without notice.
Communications 1× port for GNSS antenna Skyport interface (1) Weight calculated with integrated camera. (2) Typical values for average conditions. (3) Accuracy is
1× USB Type-C, copy speed up to 160 Mb/s the degree of conformity of a measured quantity to its actual (true) value. (4) Precision is the degree to
which further measurements show the same results. Improved by CHCNAV COPre SW.

Data storage 256 GB


Point density on UAV setup 570 pts/sqm @ 50 m AGL
5 m/s (18 km/h) speed 280 pts/sqm @ 100 m AGL

Covered area 2 km 2 area by 30 mins UAV flight


Operation One-touch acquisition or remote control
via DJI M300 Smart controller enterprise
Transport box 1× protected soft bag with custom precut
foam

Laser scanner
Laser class 1 (in accordance with IEC 60825-1:2014)
Max.range, reflectivity 450 m
> 80% (2)
Max.range, reflectivity 190 m
> 10% (2)
Max. returns supported Up to 3
Accuracy (3) 20 mm @ 20 m
30 mm @100 m

Precision (4) 15 mm
Field of view 70.4° (Horizontal) × 4.5° (Vertical)
Scan rate 240 000 pts/sec (first or strongest return)
480 000 pts/sec (dual return)
720 000 pts/sec (triple return)

Positioning and orientation system


GNSS system Dual-frequency GNSS GPS, GLONASS,
BeiDou, Galileo, sampling frequency 5 Hz

IMU update rate 500 Hz


Position accuracy 0.010 m RMS horizontal,
NO GNSS outage 0.020 m RMS vertical,
0.01 degrees RMS pitch/roll,
0.04 degrees RMS heading

Imaging system
Camera type Built-in calibrated Camera
Resolution 6252 × 4168
Effective pixels 26 MP, 30 fps
© 2021 Shanghai Huace Navigation Technology Ltd. All rights reserved. The CHC and CHC logo are trademarks of
Min. trigger interval 0.6 sec Shanghai Huace Navigation Technology Limited. All other trademarks are the property of their respective owners.
Revision November 2021.

WWW.CHCNAV.COM | [email protected]

CHC Navigation Headquarter CHC Navigation Europe CHC Navigation USA LLC CHC Navigation India
Shanghai Huace Navigation Technology Ltd. Infopark Building , Sétány 1, 1117 6380 S. Valley View Blvd Suite 246 409 Trade Center, Khokhra Circle,
599 Gaojing Road, Building D, Budapest, Hungary Las Vegas, NV 89118 USA Maninagar East, Ahmedabad,
Shanghai, 201702, China +36 20 235 8248 +1 480 399 9533 Gujarat, India
+86 21 54260273 3 @ 20 5999 369
+36 +91 90 99 98 08 02
[email protected]

You might also like