L086TI MARINE ENGINE

POWER RATING Production tolerance : ± 3%

MODEL CONDITIONS POWER rpm Base Engine

L086TIH HEAVY DUTY 285PS (210kW) 2,100

L086TIM MEDIUM DUTY 315PS (232kW) 2,300 D1146TIB

L086TIL LIGHT DUTY 360PS (265kW) 2,500

Note : 1) No reduction in rating for intake air temperature is up to 45 °C (318K) and

Heavy Duty Medium Duty Light Duty

 Heavy Duty : Operation hours are unlimited per year, at average load is up to 90 %,
At full load is up to 80 %
Typical gearbox ratio: 2.5 ~ 6
(Fishing trawler, Tug boat, Pushing vessel, Cargo boat, Freighter, Ferry)

 Medium Duty : Operation hours are up to 3,000 per year, at average load is up to 70 %
At full load is (up to 30 % / 4hrs per 12 hour operation period)
Typical gearbox ratio: 2 ~ 3.5
(Fishing boat, Pilot boat, Escort boat, Passenger boat, Ferry, Cruising vessel)

 Light Duty : Operation hours are up to 1,000 per year, at average load is up to 50 %
At full load is (up to 20 % / 2hrs per 12 hour operation period)

DOOSAN Infracore Printed in March 2020 PS-SBM0406-E1B

Engine Specification
Model Units L086TIH L086TIM L086TIL
4 cycle, In line, direct- injection, water cooled
Engine type
with wet turbo charger & inter-cooler
Rating output (B.H.P) PS(kW)/rpm 285(210)/2,100 315(232)/2,300 360(265)/2,500
Displacement cc 8,071
Cylinder number - bore(φ) x stroke mm 6 - φ111 x 139
Valve clearance at cold In / Ex mm 0.3 / 0.3
Low idling rpm rpm 750 ± 25
No load max. rpm rpm below 2,310 below 2,530 below 2,750
Mean effective pressure kg/cm2 15.14 14.55 16.06
Mean piston speed m/sec. 9.73 10.66 11.58
Compression ratio 16.7 : 1 15.3:1
Firing order 1–5–3–6–2–4
Compression pressure at 200 rpm kg/cm2 28 ( Initial condition )
Governor type of injection pump Mechanical all speed (R.S.V)
g/PS.h 156 163 167
Fuel consumption
lit / h 53 62 72
Injection timing (B.T.D.C) deg 15° ± 1° 15° ± 1° 15° ± 1°
Fuel inj. Nozzle opening pressure kg/cm 2
214
Starting system Electric Starting by starter motor
Starter motor capacity V- kW 24 - 4.5
Alternator capacity V- A 24 - 80
Battery V- Ah 24 - 100
Cooling system Indirect sea water cooling with heat exchanger
Cooling water capacity Max. / Min. lit 27 / 25
Fresh water pump type Centrifugal type, driven by V- belt
Sea water pump type Rubber impeller type driven by gear
Lubricating oil pan capacity lit Max : 23, Min : 17 ( Engine total : 25)
(Engine) pressure kg/cm2 Full : 3.5, Idle : 1.2
Model DMT 110A ( Dong – I )
Marine gear
Gear ratio 1.77 2.09 2.42 2.82 3.19
crankshaft Counter clockwise viewed from stern side
Direction of revolution
propeller Clockwise viewed from stern side
Engine size without M/G mm 1,182 x 825 x 962
(L x W x H) with M. gear mm 1,552 x 825 x 1,062
without M/G kg 790
Engine dry weight
with M. gear kg 1,015
psi = kg/cm2 x 14.22 lb= kg x 2.205 hp = PS x 0.98635
lb/ft. = N.m x 0.737 lb/PS.h = g/kW.h x 0.00162 U.S gal. = liter x 0.264
kW = 0.2388 kcal/s cfm = m3/min x 35.3

Head office
7-11, Hwasu-Dong, Dong-Gu, Incheon, Korea
TEL : 82-32-211-2246, 2248 FAX : 82-32-761-2759
Seoul Office
Doosan Infracore Co. Ltd.,
21st Floor, Doosan Tower, 18-12, Euljiro 6-ga, Jung-gu,
Seoul, Korea.
TEL : 82-2-3398-8521~8536 FAX : 82-2-3398-8509
Web site : www.doosaninfracore.com

※ Specifications are subject to change without prior notice.

DOOSAN Infracore Printed in March 2020 PS-SBM0406-E1B