The document describes a skid-mounted, belt-driven mud pump model 9T1000 DC with a 1000 HP electric motor. Details are given for the triplex pump components including pistons, liners, frames, and auxiliary equipment on the oilfield skid such as the discharge line, pulsation dampener, and cooling/lubrication system. Specifications are provided for the electric motor and belt-driven transmission powering the mud pump.
The document describes a skid-mounted, belt-driven mud pump model 9T1000 DC with a 1000 HP electric motor. Details are given for the triplex pump components including pistons, liners, frames, and auxiliary equipment on the oilfield skid such as the discharge line, pulsation dampener, and cooling/lubrication system. Specifications are provided for the electric motor and belt-driven transmission powering the mud pump.
The document describes a skid-mounted, belt-driven mud pump model 9T1000 DC with a 1000 HP electric motor. Details are given for the triplex pump components including pistons, liners, frames, and auxiliary equipment on the oilfield skid such as the discharge line, pulsation dampener, and cooling/lubrication system. Specifications are provided for the electric motor and belt-driven transmission powering the mud pump.
The document describes a skid-mounted, belt-driven mud pump model 9T1000 DC with a 1000 HP electric motor. Details are given for the triplex pump components including pistons, liners, frames, and auxiliary equipment on the oilfield skid such as the discharge line, pulsation dampener, and cooling/lubrication system. Specifications are provided for the electric motor and belt-driven transmission powering the mud pump.
1.1 9T1000 MUD PUMP ..........................................................................................................................3 1.2 AUXILIARY EQUIPMENT FOR OILFIELD SKID ........................................................................4 1.3 ELECTRIC MOTOR / TRANSMISSION ..........................................................................................6 1.4 PISTON & LINER ..............................................................................................................................6 MUD PUMP Doc n° : DT-182-10 9T1000 DC Rev n° : 00 Page 3 of 6
1 TRIPLEX MUD PUMP 9T1000
Make: Drillmec Quantity: One (1)
Mud Pump triplex single action piston, type 9T1000.
Technical data Design Horizontal design as per API 7K Temperature range -20°C / +50°C Rated input 1000 HP (745 kW) at 150 SPM Stroke 9” Max stroke per minute 150 SPM Continuous stroke range 45-150 SPM Piston diameter range 4½” – 7” Max delivery 2554 l/min – 674 GPM with 7” pistons – 150 SPM Discharge pressure at max delivery 2277 psi (157 bar) with 7” pistons Max Discharge pressure 5000 psi (345 bar) with 4½” pistons Delivery at max discharge pressure 1055 l/min (278 GPM) with 4½” pistons – 150 SPM Gear ratio 3,222 Valve pot size 7 Technical data ( 90% pump mechanical efficiency - 100% pump volumetric efficiency )
1.1 9T1000 MUD PUMP
Make: Drillmec Code: 0191 3191 Quantity: One (1) for each mud pump
1.1.1 Power end features
Make: Drillmec Quantity: One (1) for each mud pump
Power end of Mud pump is complete with:
- All steel fabricated and precision machined pump frame
- One-piece construction of crankshaft (alloy steel casting) - connecting rods - pinion shaft extended on both sides of the pump - Roller bearings throughout - forged heat-treated alloy steel herringbone gears - Crossheads provided with special anti-wear bronze covering - adjustable/replaceable crosshead slides - Splash and gravity flow lubrication system: no pump is required to power end lubrication - Oil temperature gauge side mounted
1.1.2 Fluid end features - W.P. 5000 psi
Make: Drillmec Quantity: One (1) for each mud pump
Fluid end of Mud pump is complete with:
MUD PUMP Doc n° : DT-182-10 9T1000 DC Rev n° : 00 Page 4 of 6
- Forged heat-treated alloy steel, two-piece (suction and delivery) "L" shape interchangeable fluid end modules (three indipendent blocks) - Quick change valve covers: screw type arrangement for fast maintenance - Fully open, easy access pistons and liner chambers - Two-piece quick-change piston rods - clamp-type liner and piston rod connections - Three-inlets welded design suction manifold: 8" ASA - 150 lb. flange connections c/w inline horizontal suction dampener - Discharge manifold connections on both sides: 4 1/16" - 5000 psi
1.1.3 Service jib crane
Make: Drillmec Quantity: One (1) for each mud pump
Service jib crane mounted on power end frame: nominal capacity 500 kg (1,100 lbs)
1.2 AUXILIARY EQUIPMENT FOR OILFIELD SKID
Make: Drillmec Code: 0191 4251 Quantity: One (1) for each mud pump
Mud pump is mounted on oilfield skid with follow equipment.
1.2.1 Discharge line - W.P. 5000 psi
Make: Drillmec Quantity: One (1) for each mud pump
Discharge line complete with
- Forged alloy steel discharge strainer cross c/w 4 1/16" - 5000 psi flange connections (studded) and high pressure strainer - Top connection for pulsation dampener - end connection for strainer clean-out - Pulsation dampener Hydril or equivalent model K20-5000 psi - 3” Type CH relief valve pressure range 2500 - 6200 psi - Discharge gate valve 2” – 5000 psi - Pressure visual gauge 0 - 6000 psi flanged - One (1) vibrator hose 3 ½” ID 5000 psi WP grade "D" 12 ft length coupled with B.W. hammer union 4” FIG 1002
1.2.2 Base skid oilfield design
Make: Drillmec Quantity: One (1) for each mud pump
The skid is built with I beams, welded and covered by checkered steel plates and designed to be handled with oilfield tow truck MUD PUMP Doc n° : DT-182-10 9T1000 DC Rev n° : 00 Page 5 of 6
1.2.3 Piston/liner cooling-lubrication system
Make: Drillmec Quantity: One (1) for each mud pump
Piston/liner cooling-lubrication system by means of centrifugal pump driven by electric motor
1.2.4 Others - One (1) set of special tools includes the followings: n° 1 valve seat puller n° 1 hydraulic hand pump - 700 bar n° 1 charge hoses for pulsation dampener n° 1 crankshaft rotating tool
- testing : as per standard Drillmec
1.2.5 Performance chart
MUD PUMP Doc n° : DT-182-10 9T1000 DC Rev n° : 00 Page 6 of 6
1.3 ELECTRIC MOTOR / TRANSMISSION
Make: Drillmec Code: 01914252 Quantity: One (1) for each mud pump
1.3.1 ELECTRIC MOTOR
Make: Joliet Quantity: One (1) for each mud pump
JEC75YZB3 JOLIET HIGH TORQUE DRILLING MOTOR "B" RIGHT
Series Wound high torque drilling motor continuous rating of motor for mud pump is 1085 HP. Continuous rating is at 750 VDC, 1150 Amperes, 965 RPM The following features are included: - self excited series field - armature, single shaft extension with Oilfield hub - class H insulation - heavy Duty Pressurized connection box mounted on B-right side of motor as viewed from commutator end,with double bolt on armature cable connections and terminations for space heater,auxiliary switch,and pressure sensor. - Hunt Side exhaust manifolds for complete drive and protection, - intertec Space heater, Explosion proof, - crouse-hinds auxiliary lockout switch-XP - blower assembly: 15 HP Explosion proof, 3phase, 60 Hz, 460 Volts, Providing 2800CFM of cooling - Dwyer Pressure sensor,explosion proof. - factory drilling frame - Hunt MotoKleen Vertical Air Cure. - Complete w/Connection Flange on shaft
1.3.2 TRANSMISSION Make: Drillmec Quantity: One (1) for each mud pump
Belt drive assembly:
- all steel fabricated guard - N° 14 8V type belts - sheaves: small sheave is supported by motor shaft - suitable tensioning system
1.4 PISTON & LINER
Make: Drillmec Code: 0191 3117 Quantity: One (1) for each mud pump
