www.fine-tek.

com

Rotary Paddle Level Switch

INTRODUCTION

WORKING PRINCIPLE FEATURES

The purpose of the rotary paddle level switch is 1 Rugged sealing ring prevents dust from infiltrating
to detect the presence of solid/powdery material the housing body along the shaft.
in most kinds of tanks, bins and containers. 1 Adjustable torque.
The unit is usually located through a bin wall at If the rotary paddle encounters overloading, the
the top, middle or low level of a bin. During motor will automatically shut down the motor to
normal operation (no material present) a prevent damage to the inner mechanisms and
synchronous motor rotates the paddle at RPM. extend motor life.
When this paddle rotation is impeded by 1 Very suitable for small tanks and low density
material, surrounding the paddle, motor will stall materials
and cause the Micro-switch to change state 1 Adjustable and extendible shaft models available
(indicating an alarm or control). 1 A wide variety of paddles are available

APPLICATIONS BENEFITS
1 Plastics and synthetics 1 Airtight sealed device.
1 Chemicals and fertilizer 1 Outdoor and strenuous environment application
1 Pharmaceuticals 1 Stable and reliable performance.
1 Food and beverage, 1 Lightweight and easy to install
1 Agriculture and fodder mills/depots 1 Practically designed to allow maintenance, checks
1 Cement as well as ceramics and replacement
1 Power plants 1 Not necessary to remove the complete set from
1 Various incinerators the tank.

STRUCTURE
SHAFT
OIL-SEAL
FLANGE CLUTCH MOTOR
BADY
PADDLE BODY

MICRO
SWITCH

SHAFT COVER
OIL-SEAL BEARING
PADDLE CLUTCH
NUT
CABLE MOTOR
BEARING MICRO SWITCH

STANDARD TYPE SE1 MINI TYPE SE2

CABLE

CABLE GLAND TORQUE SPRING

PCB SPRING
LED
BODY
PADDLE

LED COVER

OIL-SEAL HOUSING

BEARING MOTOR
MINI TYPE SE3
1
 WORKING PRINCIPLE & TORQUE ADJUSTING

CONTROL SWITCH
WORKING PRINCIPLE WHITE
M
1. A synchronous turning motor indicates the
Limit
tank or container’s material isn't obstructing BLACK
the paddles,C & L [COM & NC] are connected. SW.
NO.1
2. When the material is obstructing the paddles, BLUE L
C&L [COM & NC] are disconnected, C&H
[COM & NO] are connected and the motor's YELLOW C Limit
current is cut off. SW.
NO.2
3. When the material drops away from the RED H
paddles and the motor starts again C & L
[COM & NC] connect and the cycle has begun
once again.
TORQUE ADJUSTING MECHANISM
AND WIRING 1 Do not tamper with the spring as it may cause
The torque spring is applied to adjust the shaft the Rotary Paddle to malfunction.
output torque. Default settings aret "weak" and
can be adjusted to the customer’s target based Spring adjusting hole
on the tank contents and S.G. (special gravity) weakest
of the material. weak
Higher S.G. materials require stronger torque weakest
strong
settings. Start with high settings and slowly weak
strong
release the torque force until the appropriate strongest strongest
setting is found.
Resetting torque
adjusting spring
strongest
strong
weak SE29
weakest
SE38

White Black Blue Yellow Red Green

Terminal strip

110Vac NC NO
or 24Vac
COM
220Vac 110Vac
220Vac NC COM NO
Available: SE110, 120, 130, 140, 160, 170 240Vac

Resetting torque strongest AC type(Available: SE2, SE3)

adjusting spring strong
weak
weakest
White Black Blue Yellow Red Green

20 ~ 55 Vdc
V+ V- NO COM NC V+ V-
24Vdc
SEA-110D-B
PA2 080104 CC

NC COM NO
20~55 NO NC
Vdc COM DC type
GND
Available:SE110E Available:SE3
2
STANDARD TYPE

1 Power source : (A)110Vac,(B)220Vac,(C)240Vac, 1 Connection : 1"PF screw or JIS 2-1/2"H5kg/cm

2
flange
(D)24Vac, 50/60Hz (E)24Vdc 1 Protection/ material : IP65 / ADC-12
1 Power consumption : 3W, 11W(DC24V) 1 Conduit : 1/2"PF
1 Contact capacity : SPDT, 5A/250Vac 1 Material density : 0.5 g/cm3
1 Rotary speed : 1 R.P.M.
1 Insulation test voltage : 2500V

SCREW TYPE
SE110 Series
Horizontal mounting SE110 Series SE111 Series
Operation Temperature (-20BC ~ 70BC)
Weight: 1.2 kg
4-f15
1"PF
PCD130 f155

FLANGE TYPE 100 f98

SE111Series 100 f98
f10

Horizontal mounting f10

Operation Temperature (-20BC ~ 70BC) 30
Weight: 1.7 kg 105 1/2"PF 30
100 1/2"PF
240
4 135
240

SHAFT PROTECTIVE SE120 Series SE130 Series

TUBE TYPE
SE120 Series f98
Horizontal /Vertical mounting f98
Operation Temperature (-20BC ~ 70BC)
Weight: 1.2 kg 1/2"PF
1/2"PF 135
Standard Length:
L--250mm (2.2 kg)
163 f155
L--500mm (2.5 kg)
L--750mm (2.8 kg)
f155 PCD130
Customized lengths available f10 4

4
SHAFT LENGTH 4-f15 f9
PCD130
ADJUSTABLE TYPE
f27.2
SE130 Series 4-f15
f10 L L
Vertical mounting f12.7
Operation Temperature (-20BC ~ 70BC)
Standard Length: 80
L– 460~630mm (2.5 kg) f8
L– 650~1000mm (2.8 kg)
65
L– 760~1200mm (3.0 kg) 30

Customized lengths available 100

3
STANDARD TYPE

HI-TEMP TYPE
SE140 Series SE140 Series SE141 Series
Horizontal mounting
Temp. (-20BC ~ 200BC) f98
Weight: 2.1 kg
f98

1/2"PF
1/2"PF
HI-TEMP TYPE
PROTECTIVE TUBE TYPE 210
SE141 Series 189
Horizontal /Vertical mounting
f155
Operation Temperature (-20BC ~ 200BC)
f155
Standard Length (option): 4 PCD130
L--250mm (2.6 kg) 4
L--500mm (2.9 kg) PCD130
f10 f27.2
L--750mm (3.2 kg) 92
4-f15
f10 L
Special length is made by order
30
4-f15
100 80

65

HI-TEMP SHAFT
LENGTH ADJUSTABLE TYPE SE146 Series SE160 Series
SE146 Series
Vertical mounting
Operation Temperature (-20BC ~ 200BC) f98
Standard Length (option):
f98
L– 450~630mm (3 kg)
L– 650~1000mm (3.3 kg) 1/2"PF
L– 760~1200mm (3.5 kg)
1/2"PF 135
Special length is made by order

189
f155

CABLE WIRE TYPE

PCD130 f10
SE160 Series f155
14
Vertical mounting
4-f15
Operation Temperature (-20BC ~ 70BC) PCD130 f10
Standard Length (option): 4

L-- 450mm (2.5 kg) 4-f15 f9

L-- 650mm (2.8 kg) L=250mm
f6
(max.4M)
L-- 750mm (3 kg)
f12.7 L
Special length is made by order f28

f8

30 30
100 100

4
MODEL NUMBER / ORDER CODE COMPARISON TABLE

Model Number Order Code

SE110
SEX10000-AA
SE111
SE120 SEX10000-AB
SE130 SEX10000-AC
SE140 SEX10200-AA
SE141 SEX10200-AB
SE146 SEX10200-AC
SE160 SEX10000-AD

5
ORDER INFORMATION

05 06 10 11 12 13 14 15 16 17 18 19 20 21 22

SEX1 99 0 0 - A 9999999999999

05 06 Model
00: Standard
02: Hi-temperature

10 Construction
A: Ceneral type
B: Shafe protective tube type
C: Shafe length adjustable type
D: Cable wire type

11 Power supply
A: AC110V D: AC24V
B: AC220V E: DC24V
C: AC240V

Connection
12 13 14 15 16 17

Flange item A8: 1" 01: PT male

AK: JIS-FF B1: 1-1/2" 03: PF male
AN: ANSI-RF B2: 2" 07: NPT male
AS: DIN-FF B4: 2-1/2" 39: 5 kg/cm2x4T(Thin flange)
BC: Standard thin flange 40: 5 kg/cm2
(Suitable for 2-1/2"dimension) 42: 10 kg/cm2
48: 150 Lbs
Thread item 49: 300 Lbs
AA: JIS 57: PN10
AC: ANSI 58: PN16

18 Paddle model
A: None
B: 100x30(WxH)
C: 65x80(WxH)
F: 50x30(WxH)
G: Scimitar type132x100(WxH)
H:Folding type 200x28(WxH)

19 20 21 22 Length
Code Length range
0001~4000 0001~4000mm

6
 NEPSI PROOF No.GYB16.1948X Ex d IIC T3~T6 Gb
Ex tD A20/A21 IP65
T80BC/T95BC/T130BC/T190BC
PTB PROOF No. 05 ATEX 1029 II 2G Ex d IIB T6~T3 Gb
II 2D Ex tb IIIC T85BC~T200BC
EXPLOSION PROOF TYPE Db IP65

1 Power source : (A)110Vac, (B)220Vac, (C)240Vac 1 Connect : 1"PF screw or flange 1"~6"
(D)24Vac, 50/60Hz 2-1/2"H5kg/cm2 (std.)
1 Power consumption :3W 1 Housing material : AL Alloy, ADC-12
1 Contact capacity : SPDT, 3A/250Vac 1 Conduit : 1/2" (std.) or 3/4"NPT
1 Rotary speed : 1 R.P.M. 1 Material density : 0.5 g/cm3
1 Insulation test voltage : AC 1500VH1minute

EXPLOSION PROOF f113 EXPLOSION PROOF

CONNECTION TYPE SHAFT PROTECTION TYPE
SE170 series SE172 series
Horizontal mounting 108 f113
Temp. (-20BC ~ 70BC) Horizontal /Vertical mounting
Temp. (-20BC ~ 70BC)
1"PF 20 Standard Length (option): 108
24
L-- 250mm
f10 L-- 500mm
88
L-- 750mm 20
30
Customized lengths available
100 1"PF

EXPLOSION PROOF f113

f10
FLANGE TYPE
SE171 series L=250 ~
Horizontal mounting 108
750 mm
Temp. (-20BC ~ 70BC)

f155 20
14
f10 4- f15
PCD 130
75
30

100

EXPLOSION PROOF EXPLOSION PROOF

ADJUSTABLE SHAFT TYPE HI-TEMP TYPE f113
f113
SE173 series SE174 series
Horizontal mounting
Vertical mounting Temp. (-20BC ~ 200BC) 108
Temp. (-20BC ~ 70BC) 108

Standard Length (option):

f90
f155
L-- 450 ~630mm 20
45 f155
L-- 650 ~1000mm 14
L-- 760 ~1200mm f10
Special length is made by PCD 155
4-f15
order
f9 92
L=450~ 4- f15
f14 PCD 130 30
1200 mm

100

30

100

7
 NEPSI PROOF No.GYB16.1948X Ex d IIC T3~T6 Gb
Ex tD A20/A21 IP65
T80BC/T95BC/T130BC/T190BC
PTB PROOF No. 05 ATEX 1029 II 2G Ex d IIB T6~T3 Gb
II 2D Ex tb IIIC T85BC~T200BC
EXPLOSION PROOF TYPE Db IP65

EXPLOSION PROOF EXPLOSION PROOF EXPLOSION PROOF

HI-TEMP SHAFT HI-TEMP ADJUSTABLE CABLE WIRE TYPE
PROTECTIVE TUBE TYPE SHAFT TYPE SE177 Series
SE175 Series SE176 Series
Horizontal /Vertical mounting Vertical mounting Vertical mounting
Temp. (-20BC ~ 200BC) Temp. (-20BC ~ 200BC) Temp. (-20BC ~ 70BC)
Special length is made by order Special length is made by order Special length is made by order

f113
f113 f113

108
108 108

f90
f90
45 f155 20
45
f155 14
14
1"PF f14
f27.2
PCD 130
f6 4-f15
f10 f9 PCD 130
L=250~ L=450~
f14 4-f15
750 mm L=450~ 4000 mm
1200 mm f12.7 f28 108

30

30 100

100

4 Paddle Introduction
A E
(E) 50x30 (WxH), Suitable for high
(A) 100x30 (WxH), Min. fixed hole
diameter size f90mm. S.G. raw materials. Use a
small size paddle to decrease
W W the impact of material falling
directly on paddle.
H
H
F
B,C,D (F) Scimitar model paddle, Screw
(B) 65x80 (WxH), Directly mounted 132 tightly on the 1" diameter
into 2" fixed hole. fixed hole, It Is easier to
W (C) 65x120 (WxH), Directly mounted mount and dismount.
into 2" fixed hole. 100
(D) 80x80 (WxH)
H
30

8
MODEL NUMBER / ORDER CODE COMPARISON TABLE

Model Number Order Code

SE170
SEX30099-AA
SE171
SE172 SEX30099-AB
SE173 SEX30099-AC
SE174 SEX30299-AA
SE175 SEX30299-AB
SE176 SEX30299-AC
SE177 SEX30099-AD

9
ORDER INFORMATION

05 06 07 08 10 11 12 13 14 15 16 17 18 19 20 21 22

SEX3 99 99- A 9999999999999

05 06 Model
00: Standard
02: Hi-temperation

07 08 Certification
1C: ATEX-Exd
5C: TS-Exd
7C:NEPSI-Exd

10 Construction
A: Ceneral type
B: Shafe protective tube type
C: Shafe length adjustable type
D: Cable wire type

11 Power supply
A: AC110V
B: AC220V
C: AC240V
D: AC24V

Connection
12 13 14 15 16 17

Flange item A8: 1" 01: PT male

AK: JIS-FF B1: 1-1/2" 03: PF male
AN: ANSI-RF B2: 2" 07: NPT male
AS: DIN-FF B4: 2-1/2" 40: 5 kg/cm2
42: 10 kg/cm2
Thread item 48: 150 Lbs
AA: JIS 49: 300 Lbs
AC: ANSI 57: PN10
58: PN16

18 Paddle model
A:None F:50x30(WxH)
B: 100x30(WxH) G:Scimitar type 132x100(WxH)
C:65x80(WxH)

19 20 21 22 Length
Code Length range
0001~4000 0001~4000mm

10
 Housing cover code:
0: Aluminum cover
MINI TYPE(ALUMINUM ALLOY COVER) 1: Aluminum cover with LED lamp

1 Power source : (A)110Vac,(B)220Vac,(C)240Vac, 1 Housing material : Aluminum alloy

(D)24Vac, 50/60Hz,(E)24Vdc 1 Ambient temperature : -40LC ~ 85LC
1 Power consumption : 1.5W 1 Cable length : 300mm (available for custom length)
1 Contact capacity : 5A/250Vac, 5A/30Vdc 1 Material density : 0.3 g/cm3
1 Rotary speed : 1R.P.M. 1 Display status : Green(Working), Red(Stopped)
1 IP rating : IP65

STANDARD TYPE HIGH TEMPERATURE TYPE

SE3890 Series SE3894 Series
Operation temperature: -40BC ~ 85BC Operation temperature: -40BC ~ 200°C
Paddle material: PC Paddle material: SUS304

177
30 L=86mm
30 18 f88
38 LED indicator
LED indicator

80 8
f79
100
f79
3/4"PF

3/4"PF
1/2"PF
1/2"PF
f8 cable 300mm f8 cable 300mm

HIGH TEMPERATURE SHAFT

SHAFT PROTECTIVE TUBE TYPE PROTECTIVE TUBE TYPE
SE3892 Series SE3895 Series
Operation temperature: -40BC ~ 85BC Operation temperature: -40BC ~ 200°C
Paddle material: SUS304 Paddle material: SUS304

L=150~400mm
L=150~400mm
30
LED indicator 30 18 LED indicator
f88

21.7
100
f79 100
21.7 3/4"PF f79

3/4"PF
1/2"PF
f8 cable 300mm 1/2"PF
f8 cable 300mm

11
 NEPSI PROOF No.GYJ14.1148
MINI TYPE(EXPLOSION PROOF) DIP A20/21 TA , T3~T6 IP65

1 Power source : (A)110Vac,(B)220Vac,(C)240Vac, 1 Housing material : Aluminum alloy

(D)24Vac, 50/60Hz,(E)24Vdc 1 Ambient temperature : -40LC ~ 85LC
1 Power consumption : 1.5W 1 Cable length : 300mm (available for custom length)
1 Contact capacity : 5A/250Vac, 5A/30Vdc 1 Material density : 0.3 g/cm3
1 Rotary speed : 1R.P.M.
1 IP rating : IP65

STANDARD TYPE HIGH TEMPERATURE TYPE

SE3700 Series SE3704 Series
Operation temperature: -40BC ~ 85BC Operation temperature: -40BC ~ 200°C
Paddle material: PC Paddle material: SUS304

177
30 L=86mm
30 18 f88
38

80 8
f79
100
f79
3/4"PF

1/2"NPT 3/4"PF
1/2"NPT

f8 cable 300mm
f8 cable 300mm

HIGH TEMPERATURE SHAFT

SHAFT PROTECTIVE TUBE TYPE PROTECTIVE TUBE TYPE
SE3702 Series SE3705 Series
Operation temperature: -40BC ~ 85BC Operation temperature: -40BC ~ 200°C
Paddle material: SUS304 Paddle material: SUS304

L=150~400mm
L=150~400mm
30
30 18
f88

21.7
100
f79 100
21.7 3/4"PF f79

1/2"NPT 3/4"PF
1/2"NPT

f8 cable 300mm
f8 cable 300mm

12
MINI TYPE(PLASTIC COVER)

1 Power source : (A)110Vac,(B)220Vac,(C)240Vac, 1 Housing material : Plastic cover

(D)24Vac, 50/60Hz,(E)24Vdc 1 Ambient temperature : -40LC ~ 85LC
1 Power consumption : 1.5W 1 Cable length : 300mm (available for custom length)
1 Contact capacity : 5A/250Vac, 5A/30Vdc 1 Material density : 0.3 g/cm3
1 Rotary speed : 1R.P.M.
1 IP rating : IP65

STANDARD TYPE HIGH TEMPERATURE TYPE

SE3820 Series SE3824 Series
Operation temperature: -40BC ~ 85BC Operation temperature: -40BC ~ 200BC
Paddle material: PC Paddle material: SUS304

177
30 L=86mm
30 18 f88
38

80 8
f79
100
f79
3/4"PF

3/4"PF
1/2"PF
1/2"PF
f8 cable 300mm f8 cable 300mm

HIGH TEMPERATURE SHAFT

SHAFT PROTECTIVE TUBE TYPE PROTECTIVE TUBE TYPE
SE3822 Series SE3825 Series
Operation temperature: -40BC ~ 85BC Operation temperature: -40BC ~ 200BC
Paddle material: SUS304 Paddle material: SUS304

L=150~400mm
L=150~400mm
30
30 18
f88

21.7
100
f79 100
21.7 3/4"PF f79

3/4"PF
1/2"PF
f8 cable 300mm 1/2"PF
f8 cable 300mm

13
MODEL NUMBER / ORDER CODE COMPARISON TABLE

Model Number Order Code

SE3700 SEX2007D-AA
SE3702 SEX2007D-AB
SE3704 SEX2027D-AA
SE3705 SEX2027D-AB
SE3800 SEX20000-AA
SE3810 SEX20000-BA
SE3820 SEX20000-CA
SE3802 SEX20000-AB
SE3812 SEX20000-BB
SE3822 SEX20000-CB
SE3804 SEX20200-AA
SE3814 SEX20200-BA
SE3824 SEX20200-CA
SE3805 SEX20200-AB
SE3815 SEX20200-BB
SE3825 SEX20200-CB

14
ORDER INFORMATION

05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

SEX2 99 99- 99999999999999 9999

05 06 Model
00: Standard
02: Hi-temperation

07 08 Certification
00: None
7D: NEPSI-Exd

09 Housing (Next page)

A: Aluminum cover (only explosion-proof optional)
B: Aluminum cover with LED lamp
C: Plastic cover

10 Construction
A: Ceneral type
B: Shafe protective tube type

11 Power supply
A: AC110V
B: AC220V
C: AC240V
D: AC24V
E: DC24V

Connection
12 13 14 15 16 17

Flange item A7: 3/4" 01: PT male

AK: JIS-FF A8: 1" 03: PF male
AN: ANSI-RF B1: 1-1/2" 07: NPT male
AS: DIN-FF B2: 2" 40: 5 kg/cm2
42: 10 kg/cm2
Thread item 48: 150 Lbs
AA: JIS 49: 300 Lbs
AC: ANSI 57: PN10
58: PN16

15
ORDER INFORMATION

05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

SEX2 99 99- 99999999999999 9999

18 Paddle model
A:None
G: PC; Cross type
H: PC; Scimitar type 120x98(WxH)
I : SUS; 200x28(WxH)
K:SUS; Folding type 80x20(WxH)

19 20 21 22 Length
Code Length range
0001~400 0001~400mm

23 24 25 26 Cable wire length

Code Length range
0300~5000 0300~5000mm

16
MINI TYPE(ECONOMY)

1 Power source : (A)110Vac,(B)220Vac, 1 Housing material : Plastic cover

(D)24Vac, 50/60Hz 1 Ambient temperature : -10LC ~ 80LC
1 Power consumption : 1.5W 1 Cable length : 300mm (available for custom length)
1 Contact capacity : 3A/250Vac, 3A/30Vdc 1 Material density : 0.3 g/cm3
1 Rotary speed : 1R.P.M.
1 IP rating : IP65

STANDARD
SE290 A/B/D
Operation temperature: -20BC ~ 70BC
Paddle material: PC

179

30 41

f70

3/4"PF

0.5mm²X6C Cable wire length>300mm

17
MODEL NUMBER / ORDER CODE COMPARISON TABLE

Model Number Order Code

SE290A SEX40000-CAA
SE290B SEX40000-CAB
SE290C SEX40000-CAC
SE290D SEX40000-CAD

18
ORDER INFORMATION

11 12 13 14 15 16 17 18 19 20 21 22

SEX4 0 0 0 0 - C A 999999999999

11 Power supply
A: AC110V
B: AC220V
D: AC24V

Connection
12 13 14 15 16 17

Flange item A7: 3/4" 01: PT male

AK: JIS-FF A8: 1" 03: PF male
AN: ANSI-RF B1: 1-1/2" 07: NPT male
AS: DIN-FF B2: 2" 40: 5 kg/cm2
42: 10 kg/cm2
Thread item 48: 150 Lbs
AA: JIS 49: 300 Lbs
AC: ANSI 57: PN10
58: PN16

18 Paddle model
A:None
G:PC; Cross type
H:PC; Scimitar type 120x98(WxH)
I :SUS; 100x30(WxH)
K:SUS; Folding type 80x20(WxH)

19 20 21 22 Cable wire length

Code Length range
0300~5000 0300~5000mm

19
MOUNTING EXAMPLES

Regular models such as the SE11should be

installed directly on the tank side.
Mount at a 35° angle the blade through the tank
opening or hole sliding the blade in first.

* The SE170 series minimum hole size should be

95mm in diameter.
The scimitar model is directly installed on the tank 87
wall method as shown below.
(Assuming an arc-shaped tank with a 3/4 100
"connection) and then screwing it tight. Min.90

Min.3/4"PF 30

Max.45
Max.15mm

INJECTION MOLDING MACHINES

Injection Molding Machine usually require the SE38.
Install the Rotary Paddle through a 20mm diameter
hole on the tank/silo.
Remove the paddle from the device by taking out the
fastening pin.
Insert the SE38 through the mounting hole and
tighten it.
After which, secure the Paddle to the SE38 by
locking it to the shaft with the pin.
Keep in mind to 'widen' the opening of the pin in
order to secure it.

20
EXAMPLES

SE130
SE141

SE110
SE120
15B

SE111

INSTALLATION NOTICES
1. Side mount the sensor at a downward angle of 15° ~20° to decrease the material inflow impact.
2. For high temperature application (more than 70°C), please use the SE149 Series.
3. For SE110~SE140 using a 1" inlet, please apply the scimitar model and screw directly.
4. For SE130, SE146 series have flexible and extendible shafts.
5. Please ensure the lead wire enters the housing from the bottom and the nuts are fastened to secure the device.

21
 Global Network

Germany
China

U.S.
Taiwan U.S.
Singapore
Malaysia

Indonesia

Asia North America Europe

Taiwan California, U.S. Germany
FineTek Co., Ltd. - Taipei Head Quarter Aplus Finetek Sensor Inc. - US Office FineTeK GmbH - Germany Office
No.16, Tzuchiang St., Tucheng Industrial Park 355 S. Lemon Ave, Suite D, Walnut, Frankfurter Str. 62, OG D-65428
New Taipei City 236, Taiwan CA 91789 Ruesselsheim, Germany
TEL: 886-2-2269-6789 TEL: 1 909 598 2488 TEL: +49-(0)6142-17608-0
FAX: 886-2-2268-6682 FAX: 1 909 598 3188 FAX: +49-(0)6142-17608-20
EMAIL: [email protected] EMAIL: [email protected] EMAIL: [email protected]

China Illinois, U.S. Mütec Instruments GmbH - Germany Office

Fine automation Co., Ltd. - Shanghai Factory Aplus Finetek Sensor Inc. Bei den Kämpen 26
No.451 DuHui Rd, MinHang District, Shanghai, TEL: 1 815 632-3132 21220 Seevetal-Ramelsloh, Germany
China 201109 FAX: 1 815 716 8464 TEL: + 49 (0)4185-8083-0
TEL: 86-21-6490-7260 EMAIL: [email protected] FAX: + 49 (0)4185-8083-80
EMAIL: [email protected] EMAIL: [email protected]

Singapore
FineTek Pte Ltd. - Singapore Office
No. 60 Kaki Bukit Place, #07-06 Eunos
Techpark 2 Lobby B, Singapore 415979
TEL: 65-6452-6340
EMAIL: [email protected]

Indonesia
FineTek Co., Ltd. - Indonesia Office
Ruko Golden 8 Blok H No.38
Gading Serpong, Tangerang, Indonesia
TEL: 62 (021)-2923-1688
EMAIL: [email protected]
Distributor:
Malaysia
FineTek Co., Ltd. - Malaysia Office
8-05, Plaza Azalea, Persiaran Bandaraya,
Seksyen 14, 40000 Shah Alam, Selangor, Malaysiac
TEL: 603-5524-7168
EMAIL: [email protected]

08-SEXEP-102317