Scribd
Upload
761 views3 pages

Steps To Install M2000 & LMT

The document outlines the steps to install iManager M2000, Local Maintenance Terminal (LMT) BSC6000, and LMT BSC32. It provides the required software, and step-by-step instructions for installing each component. For iManager M2000, it describes adding server information for three central locations. For LMT BSC6000 and BSC32, it gives the installation directory and prompts to complete the setup.

Uploaded by

syainsi
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
761 views3 pages

Steps To Install M2000 & LMT

The document outlines the steps to install iManager M2000, Local Maintenance Terminal (LMT) BSC6000, and LMT BSC32. It provides the required software, and step-by-step instructions for installing each component. For iManager M2000, it describes adding server information for three central locations. For LMT BSC6000 and BSC32, it gives the installation directory and prompts to complete the setup.

Uploaded by

syainsi
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Steps to install iManager M2000 and Local Maintenance Terminal (LMT)

Softwares Required:

iManager M2000 installers:

1. M2000 V2R6 OMC_install


2. modifyRes

LMT BSC6000 installers:

3. BSC6000V900R008C01
4. BSC6000V900R008C01SPH026_LMT

LMT BSC32 installers:

5. G3BSC32V300R007ENGC01B023_VER(ENG)

Steps for Installing iManager M2000:

1. Open M2000 V2R6 OMC_install folder.


2. Run Setup.vbs file.
3. Confirm the install directory is C:\iManagerM2000Client.
4. Keep clicking Next with the default settings until the installation starts.
5. It will ask for the Server IP Configuration. Do Next without giving any IP address.
6. After the installation completes, click Finish.
7. Open modifyRes folder.
8. Copy modifyRes Batch file to C:\iManagerM2000Client\client\bin.
9. After copying, double click the copied modifyRes Batch file. A command prompt
pop up window will open confirming the operation is successful.
10. Exit command prompt.
11. From Start Menu open M2000 Client.
12. In Login Menu click Server Information.
13. Click Add.
14. In Add Server Information.
a. Enter the Server Name as Central 1 and
b. the corresponding IP Address for central 1 is 172.31.240.10.
c. Keep the port address unchanged.
d. Click OK.
e. Similarly Add information for Central 2&3.
f. IP Address for both Central 2 & 3 is same i.e. 172.31.240.20.
g. Keep the port address unchanged.
h. Click OK.
i. Click OK.

15. Now Login.


a. User: UBSSRFP
b. Password: **********
16. A pop up window will open after login, prompting for an upgrade in the version
of iManager.
17. Click Yes to upgrade the iManager’s version.
18. Click Continue.
19. After this installation completes, the whole process of iManager M2000
installation concludes.

Steps for Installing LMT BSC6000:

1. Open BSC6000V900R008C01 folder.


2. Run Setup.vbs file.
3. Enter the Serial Number: BSC6000
4. Keep clicking Next with the default settings until the installation starts.
5. Once the installation completes, click Finish.
6. Open BSC6000V900R008C01SPH026_LMT folder.
7. Run Setup.exe file.
8. Keep clicking Next with the default settings until the installation starts.
9. Once the installation completes, click Finish.

LMT BSC6000 in now installed.


Steps for Installing LMT BSC32:

1. Create a folder named as OMC in C:\


2. Open G3BSC32V300R007ENGC01B023_VER(ENG)\disk1 folder.
3. Run Setup.exe file.
4. Keep clicking Next with the default settings until it ask for Destination Folder.
5. Change Destination Folder to C:\OMC.
6. Do Next until it asks for OMC Server information.
7. Enter the IP Address of OMC Server as 127.0.0.1
8. Do Next until it asks for CGI Mode information.
9. Change the CGI Mode to Decimal.
10. Keep clicking Next with the default settings until the installation starts.
11. Once installation is complete, click Finish.

Installation for LMT BSC32 is complete.

You might also like