Paper Title

Subtitle if needed

Authors Name/s per 1st Affiliation (Author)

line 1 (of Affiliation): dept. name of organization
line 2-name of organization, acronyms acceptable
line 3-City, Country
line 4-e-mail address if desired

Authors Name/s per 2nd Affiliation (Author)

line 1 (of Affiliation): dept. name of organization
line 2-name of organization, acronyms acceptable
line 3-City, Country
line 4-e-mail address if desired

Abstract—This electronic document is a “live” template and already defines the components of your paper [title, text, heads, etc.] in its
style sheet.

Keywords—component; formatting; style; styling; insert (key words)

I. INTRODUCTION (HEADING 1)
This template, modified in MS Word 2007 and saved as a “Word 97-2003 Document” for the PC, provides authors with most
of the formatting specifications needed for preparing electronic versions of their papers. All standard paper components have been
specified for three reasons: (1) ease of use when formatting individual papers, (2) automatic compliance to electronic requirements
that facilitate the concurrent or later production of electronic products, and (3) conformity of style throughout a conference
proceedings. Margins, column widths, line spacing, and type styles are built-in; examples of the type styles are provided throughout
this document and are identified in italic type, within parentheses, following the example. Some components, such as multi-leveled
equations, graphics, and tables are not prescribed, although the various table text styles are provided. The formatter will need to
create these components, incorporating the applicable criteria that follow.

II. EASE OF USE

A. Selecting a Template (Heading 2)

First, confirm that you have the correct template for your paper size. This template has been tailored for output on the A4 paper
size. If you are using US letter-sized paper, please close this file and download the file “MSW_USltr_format”.

B. Maintaining the Integrity of the Specifications

The template is used to format your paper and style the text. All margins, column widths, line spaces, and text fonts are
prescribed; please do not alter them. You may note peculiarities. For example, the head margin in this template measures
proportionately more than is customary. This measurement and others are deliberate, using specifications that anticipate your paper
as one part of the entire proceedings, and not as an independent document. Please do not revise any of the current designations.

III. PREPARE YOUR PAPER BEFORE STYLING

Before you begin to format your paper, first write and save the content as a separate text file. Keep your text and graphic files
separate until after the text has been formatted and styled. Do not use hard tabs, and limit use of hard returns to only one return at
the end of a paragraph. Do not add any kind of pagination anywhere in the paper. Do not number text heads-the template will do
that for you.
 Finally, complete content and organizational editing before formatting. Please take note of the following items when
proofreading spelling and grammar:

A. Abbreviations and Acronyms

Define abbreviations and acronyms the first time they are used in the text, even after they have been defined in the abstract.
Abbreviations such as IEEE, SI, MKS, CGS, sc, dc, and rms do not have to be defined. Do not use abbreviations in the title or
heads unless they are unavoidable.

B. Units
 Use either SI (MKS) or CGS as primary units. (SI units are encouraged.) English units may be used as secondary units (in
parentheses). An exception would be the use of English units as identifiers in trade, such as “3.5-inch disk drive.”
 Avoid combining SI and CGS units, such as current in amperes and magnetic field in oersteds. This often leads to confusion
because equations do not balance dimensionally. If you must use mixed units, clearly state the units for each quantity that
you use in an equation.
 Do not mix complete spellings and abbreviations of units: “Wb/m2” or “webers per square meter,” not “webers/m2.” Spell
units when they appear in text: “...a few henries,” not “...a few H.”
 Use a zero before decimal points: “0.25,” not “.25.” Use “cm3,” not “cc.” (bullet list)

C. Equations
The equations are an exception to the prescribed specifications of this template. You will need to determine whether or not your
equation should be typed using either the Times New Roman or the Symbol font (please no other font). To create multileveled
equations, it may be necessary to treat the equation as a graphic and insert it into the text after your paper is styled.
Number equations consecutively. Equation numbers, within parentheses, are to position flush right, as in (1), using a right tab
stop. To make your equations more compact, you may use the solidus ( / ), the exp function, or appropriate exponents. Italicize
Roman symbols for quantities and variables, but not Greek symbols. Use a long dash rather than a hyphen for a minus sign.
Punctuate equations with commas or periods when they are part of a sentence, as in

 ab     

Note that the equation is centered using a center tab stop. Be sure that the symbols in your equation have been defined before or
immediately following the equation. Use “(1),” not “Eq. (1)” or “equation (1),” except at the beginning of a sentence: “Equation (1)
is ...”

D. Some Common Mistakes

 The word “data” is plural, not singular.
 The subscript for the permeability of vacuum 0, and other common scientific constants, is zero with subscript formatting,
not a lowercase letter “o.”
 In American English, commas, semi-/colons, periods, question and exclamation marks are located within quotation marks
only when a complete thought or name is cited, such as a title or full quotation. When quotation marks are used, instead of a
bold or italic typeface, to highlight a word or phrase, punctuation should appear outside of the quotation marks. A
parenthetical phrase or statement at the end of a sentence is punctuated outside of the closing parenthesis (like this). (A
parenthetical sentence is punctuated within the parentheses.)
 A graph within a graph is an “inset,” not an “insert.” The word alternatively is preferred to the word “alternately” (unless
you really mean something that alternates).
 Do not use the word “essentially” to mean “approximately” or “effectively.”
 In your paper title, if the words “that uses” can accurately replace the word using, capitalize the “u”; if not, keep using
lower-cased.
 Be aware of the different meanings of the homophones “affect” and “effect,” “complement” and “compliment,” “discreet”
and “discrete,” “principal” and “principle.”
 Do not confuse “imply” and “infer.”

Identify applicable sponsor/s here. If no sponsors, delete this text box (sponsors).
  The prefix “non” is not a word; it should be joined to the word it modifies, usually without a hyphen.
 There is no period after the “et” in the Latin abbreviation “et al.”
 The abbreviation “i.e.” means “that is,” and the abbreviation “e.g.” means “for example.”
An excellent style manual for science writers is [7].

IV. USING THE TEMPLATE

After the text edit has been completed, the paper is ready for the template. Duplicate the template file by using the Save As
command, and use the naming convention prescribed by your conference for the name of your paper. In this newly created file,
highlight all of the contents and import your prepared text file. You are now ready to style your paper; use the scroll down window
on the left of the MS Word Formatting toolbar.

A. Authors and Affiliations

The template is designed so that author affiliations are not repeated each time for multiple authors of the same affiliation. Please
keep your affiliations as succinct as possible (for example, do not differentiate among departments of the same organization). This
template was designed for two affiliations.
1) For author/s of only one affiliation (Heading 3): To change the default, adjust the template as follows.
a) Selection (Heading 4): Highlight all author and affiliation lines.
b) Change number of columns: Select the Columns icon from the MS Word Standard toolbar and then select “1 Column”
from the selection palette.
c) Deletion: Delete the author and affiliation lines for the second affiliation.
2) For author/s of more than two affiliations: To change the default, adjust the template as follows.
a) Selection: Highlight all author and affiliation lines.
b) Change number of columns: Select the “Columns” icon from the MS Word Standard toolbar and then select “1 Column”
from the selection palette.
c) Highlight author and affiliation lines of affiliation 1 and copy this selection.
d) Formatting: Insert one hard return immediately after the last character of the last affiliation line. Then paste down the
copy of affiliation 1. Repeat as necessary for each additional affiliation.
e) Reassign number of columns: Place your cursor to the right of the last character of the last affiliation line of an even
numbered affiliation (e.g., if there are five affiliations, place your cursor at end of fourth affiliation). Drag the cursor up to
highlight all of the above author and affiliation lines. Go to Column icon and select “2 Columns”. If you have an odd number of
affiliations, the final affiliation will be centered on the page; all previous will be in two columns.
B. Identify the Headings
Headings, or heads, are organizational devices that guide the reader through your paper. There are two types: component heads
and text heads.
Component heads identify the different components of your paper and are not topically subordinate to each other. Examples
include ACKNOWLEDGMENTS and REFERENCES, and for these, the correct style to use is “Heading 5.” Use “figure caption”
for your Figure captions, and “table head” for your table title. Run-in heads, such as “Abstract,” will require you to apply a style (in
this case, italic) in addition to the style provided by the drop down menu to differentiate the head from the text.
Text heads organize the topics on a relational, hierarchical basis. For example, the paper title is the primary text head because
all subsequent material relates and elaborates on this one topic. If there are two or more sub-topics, the next level head (uppercase
Roman numerals) should be used and, conversely, if there are not at least two sub-topics, then no subheads should be introduced.
Styles named “Heading 1,” “Heading 2,” “Heading 3,” and “Heading 4” are prescribed.

C. Figures and Tables

1) Positioning Figures and Tables: Place figures and tables at the top and bottom of columns. Avoid placing them in the
middle of columns. Large figures and tables may span across both columns. Figure captions should be below the figures; table
heads should appear above the tables. Insert
2) figures and tables after they are cited in the text. Use the abbreviation “Fig. 1,” even at the beginning of a sentence.

TABLE I. TABLE STYLES

 Table Table Column Head
Head Table column subhead Subhead Subhead
a
copy More table copy
a.
Sample of a Table footnote. (Table footnote)

We suggest that you use a text box to insert a graphic

(which is ideally a 300 dpi resolution TIFF or EPS file with
all fonts embedded) because this method is somewhat more
stable than directly inserting a picture.
To have non-visible rules on your frame, use the
MSWord “Format” pull-down menu, select Text Box >
Colors and Lines to choose No Fill and No Line.

Fig. 1. Example of a figure caption. (figure caption)

Figure Labels: Use 8 point Times New Roman for Figure labels. Use words rather than symbols or abbreviations when writing
Figure axis labels to avoid confusing the reader. As an example, write the quantity “Magnetization,” or “Magnetization, M,” not
just “M.” If including units in the label, present them within parentheses. Do not label axes only with units. In the example, write
“Magnetization (A/m)” or “Magnetization (A ( m(1),” not just “A/m.” Do not label axes with a ratio of quantities and units. For
example, write “Temperature (K),” not “Temperature/K.”

ACKNOWLEDGMENT (Heading 5)
The preferred spelling of the word “acknowledgment” in America is without an “e” after the “g.” Avoid the stilted expression
“one of us (R. B. G.) thanks ...”. Instead, try “R. B. G. thanks...”. Put sponsor acknowledgments in the unnumbered footnote on the
first page.

REFERENCES
The template will number citations consecutively within brackets [1]. The sentence punctuation follows the bracket [2]. Refer
simply to the reference number, as in [3]—do not use “Ref. [3]” or “reference [3]” except at the beginning of a sentence:
“Reference [3] was the first ...”
Number footnotes separately in superscripts. Place the actual footnote at the bottom of the column in which it was cited. Do not
put footnotes in the reference list. Use letters for table footnotes.
Unless there are six authors or more give all authors’ names; do not use “et al.”. Papers that have not been published, even if
they have been submitted for publication, should be cited as “unpublished” [4]. Papers that have been accepted for publication
should be cited as “in press” [5]. Capitalize only the first word in a paper title, except for proper nouns and element symbols.
For papers published in translation journals, please give the English citation first, followed by the original foreign-language
citation [6].

[1] G. Eason, B. Noble, and I.N. Sneddon, “On certain integrals of Lipschitz-Hankel type involving products of Bessel functions,” Phil. Trans. Roy. Soc.
London, vol. A247, pp. 529-551, April 1955. (references)
[2] J. Clerk Maxwell, A Treatise on Electricity and Magnetism, 3rd ed., vol. 2. Oxford: Clarendon, 1892, pp.68-73.
[3] I.S. Jacobs and C.P. Bean, “Fine particles, thin films and exchange anisotropy,” in Magnetism, vol. III, G.T. Rado and H. Suhl, Eds. New York: Academic,
1963, pp. 271-350.
[4] K. Elissa, “Title of paper if known,” unpublished.
[5] R. Nicole, “Title of paper with only first word capitalized,” J. Name Stand. Abbrev., in press.
[6] Y. Yorozu, M. Hirano, K. Oka, and Y. Tagawa, “Electron spectroscopy studies on magneto-optical media and plastic substrate interface,” IEEE Transl. J.
Magn. Japan, vol. 2, pp. 740-741, August 1987 [Digests 9th Annual Conf. Magnetics Japan, p. 301, 1982].
[7] M. Young, The Technical Writer’s Handbook. Mill Valley, CA: University Science, 1989.