Scribd
Upload
57 views6 pages

GP Paper1

This document provides technical specifications and drawings for a submerged cryogenic pump system. It includes: 1) An index listing the system description, pump data sheet, bill of materials, drawings and certificates, inspection and test plans, and spare parts. 2) The pump data sheet specifies it is a 4-stage ARTIKA160-4S pump for an LNG tanker with design/test pressures of 30/45 bar, 150 lpm flow at 370m head, and 22kW integrated motor running at 4,846 rpm. 3) Drawings and certificates are provided for the pump, mounting bracket, connectors, flanges, cables, double feed-through, junction box,

Uploaded by

prasad_satyam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
57 views6 pages

GP Paper1

This document provides technical specifications and drawings for a submerged cryogenic pump system. It includes: 1) An index listing the system description, pump data sheet, bill of materials, drawings and certificates, inspection and test plans, and spare parts. 2) The pump data sheet specifies it is a 4-stage ARTIKA160-4S pump for an LNG tanker with design/test pressures of 30/45 bar, 150 lpm flow at 370m head, and 22kW integrated motor running at 4,846 rpm. 3) Drawings and certificates are provided for the pump, mounting bracket, connectors, flanges, cables, double feed-through, junction box,

Uploaded by

prasad_satyam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

INDEX

1 System Description ... 4

2 Pump Data Sheet 5

3 Bill of Material 15

4 Drawings and Certificate, etc. 16

4-1 Submerged pump, ARTIKA160-4S 17

4-2 Mounting Bracket 20

4-3 Local Connector 22

4-4 Special Flange 25

4-5 Cable_Cryogenic(from Pump to Double Feed-through) 27

4-6 Cable_External(from Double Feed-through to Junction Box) 29

4-7 Double Feed-through 32

4-8 Junction Box 39

4-9 VFD Starter Panel 49

4-10 VFD Data and Certificate, etc. 75

5 Inspection and Test Plan 78

5-1 Inspection Test Program 79

5-2 Hydrostatic Test Procedure 83

5-3 Performance Test Procedure 92

6 Spare Part for Installation, Start-up and Commissioning 107


1. System Description

*Note
The followings are not scope of supply from Vendor.

- Foundation seat
- Installation works for Pump, cables, Double Feed-through, Junction box etc.
- Cable clamps
2. Pump Technical Data

2-1. Pump technical sheet

CUSTOMER
CUSTOMER SAMSUNG HEAVY INDUSTRIES
PROJECT NUMBER SN2388/89(AET 300K Dual Fueled Crude Oil Tanker)
SERVICE
LNG SUBMERGED IN-TANK
CONSTRUCTION
PUMP TYPE ARTIKA160-4S
NUMBER OF STAGES 4
DESIGN PRESSURE [Bar] 30 (3. MPa)
HYDROSTATIC PRESSURE [Bar] 45 (4.5MPa)
WEIGHT [Kg] 80
IMPELLER DIAMETER [mm] 162
NOZZLE CONNECTION (PUMP DISCHARGE FLANGE)
STANDARD UNI EN 1092-1
SIZE DN32
RATING PN40
FACING TYPE C
POSITION VERTICAL
MATERIAL
DIFFUSERS (PUMP HOUSING) EN 42100 AB & AC CASTING ALUMINIUM ALLOY
IMPELLERS EN 42100 AB & AC CASTING ALUMINIUM ALLOY
MOTOR CAPS EN 42100 AB & AC CASTING ALUMINIUM ALLOY
BEARINGS 7305 - HYBRID
INDUCER AL 6082 T6
WEAR RING AISI 304 (1.4301)
MOTOR SHAFT AISI 431 (1.4057)
MOTOR CASING AISI 304 (1.4301)
MOTOR
TYPE INTEGRATED, SUBMERGED, VERTICAL
NOMINAL POWER [KW] 22
NOMINAL SPEED [RPM] 58 5
VOLTAGE [V] 440
CURRENT [A] 42.
PHASE 3
POLES 2
FREQUENCY [Hz] 104 (Base frequency)
OPERATING CONDITION (RATED)
FLOWRATE [Lpm] 150
HEAD [m] 370
DIFFERENTIAL PRESSURE [Bar] 16.3
DENSITY [Kg/dm^3] 0.45
POWER ABSORBED [kW] 12
HYDRAULIC POWER [kW]
HYDRAULIC EFFICIENCY 0.34
NPSH required [m] 0.73
SPEED [RPM] 4846
FREQUENCY [Hz] 86.2
CERTIFICATIONS
BV(SN2388)/DNV-GL(SN2389) Class approval

ber th
,2020
2-2. Pump performance curve

You might also like