Tracy Mitchell

118 Crystal View Ln.

York, SC 29745 US
704-426-0062 (Cellular)
[email protected]
________________________________________
Personal Statement
________________________________________
I am hoping to obtain an entry level position as an imaging diagnostics technici
an that will utilize my experience and education and provide professional challe
nge and growth.
________________________________________
Professional Resume
________________________________________

Imaging Field Service Engineer

Industry Focus: Engineering Job Title: Imaging Field Service Engin
eer
Experience: Less than 1 year Looking For: Permanent Full-Ti
me
Visa Status: U.S. Citizen Salary: $50000 - $10
0000
Education Level: 2-Year College Degree Security Clearance: None
Relocation: Within Entire U.S. Travel Preference: No Preference
Education
ECPI College of Technology, Charlotte, N.C.
* Diploma in Medical Imaging Equipment
Technology
Grad: 6/2010
* Radiologic Service Training Institute - Level 1
* Associates Degree in Electronics Engineering
Grad: 8/2010
* GPA: 3.61
Relevant Skills & Training
RSTI - (Radiological Service Training Institute) Phase I
* Introduction to Radiographic Systems- how x-rays are made, the history of x-ra
ys, different components of x-rays
* Fluoroscopic Systems- basic understanding of fluoroscopy
* Imaging systems- GE AMX 4 (Portable), GE Revolution, GE legacy R&F, GE Mobile
Mammogram Unit
* Changed X-ray tubes
* Safety while working and taking x-rays
* Preventive maintenance
* Half Value Layer
* One and three phase transformers
* X-ray production overview

ECPI College of Technology - Classroom Training

Electronic Concepts
* Learned the basics of AC/DC electronics including: voltage, current and resist
ance using Ohms Law and Watts Law in series and parallel circuitry.
Electricity I & II
* Understanding of how to combine AC and DC voltage in series and parallel circu
its using Ohm's Law and Watts Law.
* Learned about adding transformers, capacitors and inductors in an analog circu
it.
* Taught how to use step up and step down transformers in AC series and parallel
RLC and CKT circuits, also DC RL, RLC, and CKT circuits.
Digital Engineering Technology I & II
* Learned basic digital logic, binary numbering systems, basic logic gates, and
digital displays.
* Understanding of counters, shift registers, arithmetic circuits, and digital t
o analog and analog to digital converters.
Electronics Engineering Technology I & II
* Learned about analog electronic devices and circuits.
* Worked with semiconductors, transistors, power supplies, and amplifiers.
* Taught the operation of large amplifiers, operational amplifiers, oscillators,
multi-vibrators, and regulated power supplied.
Networking I & II
* Learned about Topologies for Token Ring and Ethernet networks, network and tra
nsport protocols, connectivity for devices, and LAN/WAN services.
* Understanding of how to detect and troubleshoot connectivity problems and reso
lve them and an understanding of IP addresses and how the work.
UNIX Administration I & II
* Basic knowledge and understanding of UNIX network security, network connectivi
ty issues, problem diagnostics, system commands and utilities.
Microcomputer Upgrade & Maintenance
* Maintained and repaired P.C.'s using diagnostic software.
* Worked on memory expansion and hard drive replacement.
Computer Applications
* Learned how to use Microsoft Office 2007 (Word, Excel, and PowerPoint) to crea
te word documents, spreadsheets, and presentations.

Certifications and Awards

* Dean's List
* Perfect Attendance
* National Careers Readiness Certificate (GOLD) - South Carolina Work Ready Prog
ram.
* RSTI (Radiological Service Training Institute) Phase 1 X-ray
College Organizations
* Member of the Tech. Club at (ECPI College Of Technology)
Hobbies & Leisure Activities
* Building and working on Harley Davidson motorcycles, ATV's, dirt bikes and boa
ts.
* Working on heavy equipment such as dump trucks, bulldozers, and front-end load
ers.
* Working on and restoring old classic cars, trucks and Hot Rods.
* Custom auto paint and body work.
* Welding - ARC, MIG, and TIG.
* Building and repairing computers, Laptops, desktops, PlayStations, iPod's and
cell phones.
* Heating and Air conditioning work.
Work History
Carolina Biker Inc,
York,S.C.
11/1999 - 6/2010
Custom Motorcycle Mechanic/Fabricator
* Build, repair and modify custom motorcycles for customers who want something d
ifferent than what is on the public market.
* Frame fabrication, wiring, lowering, custom paint jobs, trouble-shooting and r
ebuilding motors and transmissions to increase performance.
Ferebee Corporation,
Charlotte, N.C.
1/2008 - 9/2008
Dump Truck Driver/Loader Operator
* Hauled paving materials for commercial and residential customers
* Operated front-end loader in order to ensure materials were mixed correctly
* Ensured trucks, materials, and plant operations were maintained safely
Blue Max,
Charlotte, N.C.
8/1999 - 1/2008
Dump Truck Driver
* Transported asphalt paving materials for commercial and residential customers
* Interacted with and communicated with paving crew in order to ensure safety gu
idelines
* Required to comply with DMV, GVWR, & EPA regulations.
All Points Trucking,
Charlotte,N.C.
4/1997 - 8/2003
Dump Truck Driver/Dozer Operator/Heavy Equipment Mechanic
* Responsible for the transport and delivery of materials.
* Operated heavy equipment for loading trucks with proper material and weight li
mits.
* Responsible for maintenance and repair of heavy equipment to ensure safe and p
roper performance.
Factory Direct Shutters,
Palm Bay Fla.
3/1994 - 4/1997
Hurricane Shutter Installer/Field Service Repair
* Installed and repaired electric roll-up hurricane shutters on houses, condo's,
and commercial buildings in Florida.
CL Industries,
Palm Bay, Fla.
5/1992 - 4/1997
Straight Truck Driver/Mechanic
* Delivered (stucco) plaster application that is applied externally to houses an
d commercial buildings in tropical locations to keep out humidity and moisture.
References Available Upon Request