AOC4518R8v06 ASI4517R12v06: Antenna Specifications
AOC4518R8v06 ASI4517R12v06: Antenna Specifications
AOC4518R8v06 ASI4517R12v06: Antenna Specifications
ASI4517R12v06
DXXX-824-894/824-894/2300-2690-65/65/65-16i/16i/18i-M/M/M-R
DXXXXXX-690-960/690-960/1427-2690/1427-2690/1695-2690/1695-2690-
EasyRET 850M 4T4R & 2.3/2.6G TDD 8T8R Antenna with 3 Integrated RCUs - 2.0m
65/65/65/65/65/65-15i/15i/16.5i/16.5i/16.5i/16.5i-M/M/M/M/M/M-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2) 2 x (1695 - 2690) (LBy1/RBy3)
Frequency range (MHz)
690 - 803 790 - 862 824 - 894 880 - 960 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45°
2 - 12 , continuously adjustable, each band 2 - 12 , continuously adjustable, each band
Electrical downtilt (°)
separately separately
at mid Tilt 14.1 14.7 14.9 15.2 15.5 15.9 16.1 16.3
Gain (dBi)
over all Tilts 14.0 ±0.5 14.6 ±0.5 14.8 ±0.5 15.0 ±0.5 15.4 ±0.6 15.8 ±0.5 16.0 ±0.5 16.2 ±0.5
Side lobe suppression for first side
> 15 > 16 > 16 > 15 > 16 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3dB beam width (°) 70 ±6 62 ±6 59 ±6 56 ±6 63 ±6 60 ±6 59 ±6 57 ±6
Vertical 3dB beam width (°) 10.9 ±0.9 9.9 ±0.7 9.4 ±0.5 8.9 ±0.5 9.0 ±0.8 8.0 ±0.7 7.2 ±0.4 6.5 ±0.4
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 25
Interband isolation (dB) ≥ 25 ≥ 28
Front to back ratio , ±30° (dB) > 20 > 21 > 22 > 22 > 24 > 24 > 25 > 24
Cross polar ratio (dB) 0° > 18 > 18 > 18 > 18 > 18 > 17 > 17 > 16
Max. power per input (W) 300 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC Ground DC Ground
Electrical Properties
2 x (1427 - 2690) (LTy2/RTy4)
Frequency range (MHz)
1427 - 1518 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45°
Electrical downtilt (°) 2 - 12 , continuously adjustable, each band separately
at mid Tilt 14.8 15.6 16.0 16.2 16.3
Gain (dBi)
over all Tilts 14.7 ±0.6 15.5 ±0.6 15.9 ±0.6 16.1 ±0.5 16.2 ±0.5
Side lobe suppression for first side
> 15 > 16 > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3dB beam width (°) 65 ±6 66 ±6 62 ±6 59 ±6 57 ±6
Vertical 3dB beam width (°) 11.1 ±0.8 9.0 ±0.8 8.1 ±0.7 7.2 ±0.4 6.5 ±0.4
VSWR < 1.5
Cross polar isolation (dB) ≥ 25
Interband isolation (dB) ≥ 28
Front to back ratio , ±30° (dB) > 24 > 26 > 26 > 26 > 25
Cross polar ratio (dB) 0° > 18 > 16 > 16 > 17 > 17
Max. power per input (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
1
AOC4518R8v06
ASI4517R12v06
DXXX-824-894/824-894/2300-2690-65/65/65-16i/16i/18i-M/M/M-R
DXXXXXX-690-960/690-960/1427-2690/1427-2690/1695-2690/1695-2690-
EasyRET 850M 4T4R & 2.3/2.6G TDD 8T8R Antenna with 3 Integrated RCUs - 2.0m
65/65/65/65/65/65-15i/15i/16.5i/16.5i/16.5i/16.5i-M/M/M/M/M/M-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.0m
106
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2099 x 369 x 226
Packing dimensions (H x W x D) (mm) 2335 x 455 x 270
Antenna weight (kg) 34.5
Clamps weight (kg) 3.6 (2 units)
Antenna packing weight (kg) 45.9 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material Fiberglass
1303
2099
Radome colour Light grey
Operational temperature (℃) -40 .. +65
Frontal: 425 (at 150 km/h)
Wind load (N) Lateral: 505 (at 150 km/h)
Maximum: 770 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 12 x 4.3-10 Female
Connector position Bottom
Accessories
Item Model Description Weight Units per antenna
2
AOC4518R8v06
ASI4517R12v06
DXXX-824-894/824-894/2300-2690-65/65/65-16i/16i/18i-M/M/M-R
DXXXXXX-690-960/690-960/1427-2690/1427-2690/1695-2690/1695-2690-
EasyRET 850M 4T4R & 2.3/2.6G TDD 8T8R Antenna with 3 Integrated RCUs - 2.0m
65/65/65/65/65/65-15i/15i/16.5i/16.5i/16.5i/16.5i-M/M/M/M/M/M-R
EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.0m
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software
interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching
function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
HWMxxx…........Lr1
LTy2 RTy4
HWMxxx…….LBy1
HWMxxx……..LTy2
HWMxxx…….RTy4
LBy1 RBy3
HWMxxx…….RBy3
Lr1 Rr2
HWMxxx………Rr2
r - Red y - Yellow
L - Left array R - Right array T - Top array B - Bottom array
NOTE
1. Facilities, such as towers and poles, must bear the weight and wind load of antennas.
2. HUAWEI ‘s standard brackets and accessories must be used for any installation.
3. The antenna working environment must meet the requirements specified in the datasheet.
4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to requirements
described in the antenna installation guide.
Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com/antenna
Any previous datasheet issues become invalid. 3 Issue: 2019-10-16