Ev Prosound 2011-Catalog

Speakers and Electronics
www.electrovoice.com
mics • dsp • amps • speakers
2
Contents
X-Line 4
Xlvc 6
Xlc 8
XLCi 9
X-Array 10
Xi Series 11
EVA - Expandable Vertical Array 14
EVH - Horn Load 16
EVF - Front Load 18
FRi Series 20
EVI Series 22
EVID Series 24
S Series Mini Monitor 28
ZX/ZXA Series 29
Sx/SxA Series 32
Phoenix 36
QRx Series 38
Tour X 40
Force i Loudspeaker Series 42
Variplex II Systems 44
TL Series 45
SL Series 46
Compression Drivers 47
Low Frequency Transducers 48
EVM Instrument Speakers 49
Rigging and Accessories 50
Tour Grade Amplifiers 56
Precision Series Remote Control Amplifiers 58
Q Series Amplifiers MK II 60
Contractor Precision Series Amplifiers 62
Compact Precision 65
Commercial Power Amplifiers 66
NetMax Digital Matrix System 68
Signal Processors 70
3
X-Line Live for Sound
Speakers
Concert
X-Line system development was driven by the need for a provides wide horizontal dispersion from a single, vertical
high-level concert touring system that combined the sonic line-array with exceptional coherent wavefront summation
impact and vocal intelligibility of the renowned X-Array in the vertical plane. Extended low-frequency polar control
Install
system with the uniform, predictable coverage that only produces more uniform power response, further enhancing
a line-array configuration can deliver. The X-Line system overall intelligibility.
Xvls Cabinet
• High-output, three-way line-array system • Ring Mode Decoupling™ (RMD™) provides
• Rectangular cabinet designed level-independent fidelity, greater midbass
• 90° horizontal coverage pattern ideal clarity, and high frequency accuracy
for long-throw applications • Proprietary rigging allows for rapid
• New EV® Hydra™ time-synchronized venue load-in and load-out
HF vertical plane-wave generator
provides excellent far-field summing
Xvlt Cabinet
• High-output, three-way line-array system excellent far-field summing
• Five-degree trapezoidal cabinet design • Ring Mode Decoupling™ (RMD™) provides
for lower "J" section of linear array level-independent fidelity, greater midbass
• 120° horizontal coverage typical for clarity, and high frequency accuracy
medium-throw assignment • Proprietary rigging allows for rapid
• New EV Hydra™ time-synchronized HF venue load-in and load-out
vertical plane wave generator provides
Xsub(F) X-Line Two x 18" Subwoofer

• High-output, line-array subwoofer system with non-flying version
• Rectangular cabinet with footprint • Proprietary rigging allows for rapid
identical to other X-Line systems venue load-in and load-out
• Can be flown or ground-stacked
4
Live for Sound X-Line
Speakers
Concert
Install
XVLS XVLT XSub/f
Freq Range. (-3 dB) 41 Hz – 16 kHz 41 Hz – 16 kHz 33 Hz – 400 Hz
Freq. Range. (-10 dB) 28 Hz – 17 kHz 28 Hz – 17 kHz 28 Hz – 500 Hz
Horizontal Coverage 90° 120 ° —
Vertical Coverage* 5° 9° —
LF Power Handling1 1200 W cont./4800 W peak 1200 W cont./4800 W peak 1200 W cont./4800 W peak4
MB Power Handling2 600 W cont./2400 W peak 600 W cont./2400 W peak —
HF Power Handling3 225 W cont./900 W peak 225 W cont./900 W peak —
Sensitivity 1w@1m (LF/MB/HF)* 98/108/114 dB 97/107/114 dB 104 dB
Max. SPL (calc., peak) (LF/MB/HF)* 134/142/144 dB 133/141/144 dB 141 dB
Sensitivity** 1w/10m (Peak) 135 dB 135 dB 126 dB
LF Transducer 2 x 15-in EVX-155PL 2 x 15-in EVX-155PL 2 x 18-in EVX-180B
MB Transducer 2 x 8-in ND08 2 x 8-in ND08 —
HF Transducer 3 x 3-in ND6-16 3 x 3-in ND6-16 —
Connectors 2 Neutrik® NL8 2 Neutrik® NL8 2 Neutrik® NL8
Enclosure Material Textured Epoxy Paint/birch plywood Textured Epoxy Paint/birch plywood Textured Epoxy Paint/birch plywood
Grille Powder-coated steel Powder-coated steel Powder-coated steel
Environmental Specs IEC 529 IP24, MIL STD 810 IEC 529 IP24, MIL STD 810 IEC 529 IP24, MIL STD 810
Dimensions (H (front/rear) x W x D) * 494.3/494.3 x 1244.6 x 740.4 mm 494.3/429.7 x 1244.6 x 740.4 mm 494.3/494.3 x 1244.6 x 740.4 mm
19.46”/19.46“ x 49 ” x 29.15” 19.46”/16.92“ x 49 ” x 29.15” 19.46”/19.46“ x 49 ” x 29.15”
Net Weight * 117 kg (257 lbs) 115 kg (253 lbs) 92 kg (202 lbs)
• *Single Box @ 1 Meter. ** 4 Box Array @ 10 Meters. 1 – (50-200 Hz). 2 – (300-2000 Hz). 3 - (1200-8000 Hz). 4 - (50-100 Hz)
5
Xlvc Live for Sound
Speakers
Concert
When a line array with limited size and weight is required, intelligibility and sonic horsepower in a package that is
XLVC is the choice of professionals around the world. easy to configure and suspend.
XLVC very compact line arrays combine reliability,
Install
XLD281 Very Compact 120° H Dual 8"Line Array System
• Full Bandwidth 3-way Element (60Hz-20kHz) • Versatile Subwoofer Integration

• Very Compact, Lightweight • Bi-Amp or Tri-Amp Operation
• CCT™ (Coverage Control Technology) • Neodymium Transducers
• 120° Horizontal Coverage to 250 Hz • LAPS Aiming and Flying Software
• Simple, Quick Integrated Rigging
XLD291 Very Compact 90° H Dual 8"Line Array System
• Very compact, lightweight • Versatile subwoofer integration

• CCT™ (Coverage Control Technology) • Bi-amp or tri-amp operation
• Simple, quick integrated rigging • Neodymium transducers
• 90° horizontal coverage to 200 Hz • LAPS aiming and flying software
XCS312 Triple 12"Cardioid Very Compact Line-array Bass Element
• Three DVX3120 12" low-frequency transducers • Self-contained rigging hardware

• 1500 W continuous, 6000 W peak • LAPS aiming and prediction software compatible
• Versatile integration in main arrays
XLE181 & XLE191 Very Compact 120° or 90° H Single 8"Line Array System
• XLE181: 120°h x 10°v • Simple, Quick Integrated Rigging

• XLE191: 90°h x 10°v • Bi-Amp or Fullrange Operation
• Full Bandwidth 2-Way Element (75Hz-20kHz) • Neodymium Transducers
• Most Compact, Very Lightweight • LAPS Aiming and Flying Software
6
Live for Sound XLVC
Speakers
Concert
Install
XLD 281 XLD 291 XLE 181 XLE 191 XCS312
Freq Range. (-3 dB) 65 Hz – 16 kHz 65 Hz – 16.2 kHz 65 Hz – 16 kHz 65 Hz – 16.2 kHz
Freq. Range. (-10 dB) 56 Hz – 16.5 kHz 56 Hz – 16.7 kHz 56 Hz – 16.5 kHz 56 Hz – 16.7 kHz
Horizontal Coverage 120° 90 ° 120° 90 ° 200°
LF1 Power Handling1 200 W cont./800 W peak 200 W cont./800 W peak 200 W cont./800 W peak 200 W cont./800 W peak 1000 W cont./4000 W peak4
LF2 Power Handling2 200 W cont./800 W peak 200 W cont./800 W peak — — 500 W cont./1000 W peak4
HF Power Handling3 80 W cont./320 W peak 80 W cont./320 W peak 80 W cont./320 W peak 80 W cont./320 W peak —
Sensitivity 1w@1m (LF1&LF2/HF)* 99/112 dB 99/113 dB 99/112 dB 99/113 dB 100 dB
Max. SPL (calc., peak) (LF1&LF2/HF)* 128/137 dB 128/138 dB 128/137 dB 128/138 dB 136 dB
Sensitivity** 1w/10m (Peak) 129 dB 130 dB 129 dB 130 dB 121 dB
LF1 Transducer 1 x 8-in DVN2080 1 x 8-in DVN2080 1 x 8-in DVN2080 1 x 8-in DVN2080 2 x 12-in DVX3120A
LF2 Transducer 1 x 8-in DVN2080 1 x 8-in DVN2080 — — 1 x 12-in DVX3120A
HF Transducer 2 x 2-in ND2S 2 x 2-in ND2S 2 x 2-in ND2S 2 x 2-in ND2S —
Connectors 2 Neutrik® NL8 2 Neutrik® NL8 2 Neutrik® NL8 2 Neutrik® NL8 2 Neutrik® NL8
Enclosure Material EVCoat®-coated birch plywood EVCoat®-coated birch plywood EVCoat®-coated birch plywood EVCoat®-coated birch plywood EVCoat®-coated birch plywood
Grille Powder-coated steel Powder-coated steel Powder-coated steel Powder-coated steel Powder-coated steel
Environmental Specs IEC 529 IP24 IEC 529 IP24 IEC 529 IP24 IEC 529 IP24 IEC 529 IP24
MIL STD 810 MIL STD 810 MIL STD 810 MIL STD 810 MIL STD 810
Dimensions (H x W x D) * 251 x 726 x 369 mm 251 x 726 x 369 mm 251 x 516 x 369 mm 251 x 516 x 369 mm 508 x 726 x 677 mm
9.9” x 28.58 ” x 14.52” 9.9” x 28.58 ” x 14.52” 9.9” x 20.3 ” x 14.52” 9.9” x 20.3 ” x 14.52” 20” x 28.58” x 26.65”
Net Weight * 21.8 kg (48 lbs) 21.8 kg (48 lbs) 17.24 kg (38 lbs) 17.24 kg (38 lbs) 67.13 kg (148 lbs)
*Single Box @ 1 Meter. ** 4 Box Array @ 10 Meters. 1 – (750-1750 Hz). 2 – (100-750 Hz). 3 - (1500-6500 Hz). 4 - (60-100 Hz)
7
Xlc Live for Sound
Speakers
Concert
Whether at a medium-sized festival, in a large concert hall of performance and reliability. It is no wonder why XLC is
or house of worship, or as a supplementary system used one of the most popular line array systems in the world.
with X-Line, XLC compact line arrays have a proven record
Three-Way, High-Output Three-Way, High-Output
Xlc127DVX Compact Line-array Element Xlc 907DVX Compact Line-array Element
• Accurate vertical control & coverage
• Accurate vertical control & coverage
• Compact & lightweight
• Compact & lightweight
• Fast, simple integrated rigging
• Tri-amp or optional bi-amp operation
• Tri-amp or optional bi-amp operation
• True three-way design
• True three-way design
• LAPS aiming software
• LAPS aiming software
• 90° horizontal full-range line-array
• 120° horizontal full-range line-array
• Quik-Rig™ or fixed
• Quik-Rig™ or fixed installation rigging
installation rigging
Xlc215 High-Output Dual 15" Subwoofer Line-array Element
• Compact & lightweight, 139 dB SPL • Optional adapter grid for use with XLD281
• Fast, simple integrated rigging • 2 x DVX3151 transducers
• Footprint identical to XLC-127DVX • Quik-Rig™ or fixed installation rigging
Xlc 127DVX Xlc 907DVX Xlc 215

Freq Range. (-3 dB) 65 Hz – 16 kHz 65 Hz – 16 kHz
Freq. Range. (-10 dB) 54 Hz – 17 kHz 54 Hz – 17 kHz
Horizontal Coverage 120° 90 ° 300°
LF Transducer 1 x 12-in DVX3121A 1 x 12-in DVX3121A 2 x 15-in DVX3151A
MB Transducer 2 x 6.5-in DVN 2065 2 x 6.5-in DVN2065 —
Enclosure Material EVCoat®-coated birch plywood EVCoat®-coated birch plywood EVCoat®-coated birch plywood
362 x 991 x 572 mm 362 x 990 x 572 mm 546 x 991 x 572 mm

Dimensions (H x W x D) * 14.25” x 39 ” x 22.5” 14.25” x 39 ” x 22.5” 21.5” x 39” x 22.5”
Net Weight * 50,4 kg (111 lbs) 50.4 kg (111 lbs) 54.5 kg (120 lbs)
8
Live for Sound XLCi
Speakers
XLCi is the dedicated installation version of the popular XLC compact line-array featuring visually appealing rigging that
doesn't distract from building architecture.
Install
Three-Way, High-Output Three-Way, High-Output
Xlci 127DVX Compact Line-array Element Xlci 907DVX Compact Line-array Element
• Accurate vertical control & coverage • Accurate vertical control & coverage
• Compact & lightweight • Compact & lightweight
• Tri-amp or optional bi-amp operation • Tri-amp or optional bi-amp operation
• True three-way design • True three-way design
• LAPS aiming software • LAPS aiming software
• 120° horizontal full-range line-array • 90° horizontal full-range line-array
• Fixed installation rigging • Fixed installation rigging
Xlci 215 High-Output Dual 15" Subwoofer Line-array Element
• Compact & lightweight, 139 dB SPL • Optional adapter grid for use
• Fast, simple integrated rigging with XLD281& XLD291
• Footprint identical to XLC-127DVX • 2 x DVX3151A transducers
• Fixed installation rigging
Xlci 127DVX Xlci 907DVX Xlci 215

Freq Range. (-3 dB) 65 Hz – 16 kHz 65 Hz – 16 kHz
Freq. Range. (-10 dB) 54 Hz – 17 kHz 54 Hz – 17 kHz
Horizontal Coverage 120° 90 ° 300°
LF Transducer 1 x 12-in DVX3121A 1 x 12-in DVX3121A 2 x 15-in DVX3151A
MB Transducer 2 x 6.5-in DVN 2065 2 x 6.5-in DVN2065 —
Enclosure Material EVCoat®-coated birch plywood EVCoat®-coated birch plywood EVCoat®-coated birch plywood
362 x 991 x 572 mm 362 x 990 x 572 mm 546 x 991 x 572 mm

Dimensions (H x W x D) * 14.25” x 39 ” x 22.5” 14.25” x 39 ” x 22.5” 21.5” x 39” x 22.5”
Net Weight * 50,4 kg (111 lbs) 50.4 kg (111 lbs) 54.5 kg (120 lbs)
9
X-Array Live for Sound
Speakers
Concert
X-Array traditional horizontal array systems provide world class performance and flexibility for the ultimate in concert
touring reinforcement.
Install
Xw12A Floor-Monitor Xw15A Floor-Monitor
• 2-way high-output Floor monitor • 2-way high-output Floor monitor

• Vented LF enclosure • Vented LF enclosure
• 3" voice coil (titanium • 3" voice coil (titanium
diaphragm) for low distortion diaphragm) for low distortion
• Two symmetrical 55° angles • Two symmetrical 55° angles
Xw12A Xw15A
Frequency Range (-3 dB) 65 Hz - 16 KHz 55 Hz - 18 KHz
Recommended High-Pass Frequency Systemcontroller Systemcontroller
Axial Sensitivity SPL 1W/1m 98/110 dB 99/110 dB
Max. SPL / 1m (calc.); full space 129/135 dB 133/135 dB
Long-Term Power Handling 300/75 W 600/75 W
Short-Term Power Handling (Peak) 1.200/300 W 2.400/300 W
Coverage (nominal -6 dB) H° x V° 55° x 80° (CD Horn) 55° x 80° (CD Horn)
Directivity Index 11.6 dB (+2.3/-2.1dB) 11.6 dB (+3.0/-3.6dB)
1,200 Hz - 16 KHz 1,200 Hz - 16 KHz
LF woofer (transducer) 12” (DL12ST) 15” (EVX-155)
MB woofer (transducer) --- ---
HF throat diameter (transducer) 1.4” (ND6-16) 1.4” (ND6-16)
Crossover Frequencies Factory preset Factory preset
Nominal Impedance 8 Ω/16 Ω 8 Ω/16 Ω
Minimum Impedance 8.2 Ω/10.5 Ω 7.2 Ω/14.3 Ω
Input Connections 2 four-pin Speakon 2 four-pin Speakon
Dimensions (H x W at front x D) 534 x 449 x 313 mm 644 x 452 x 340 mm

23” x 17.2” x 12.2” 25.4” x 18” x 13.4”
(in floor position) (in floor position)
Net Weight 21.9 kg (48 lbs.) 28.4 kg (62.5 lbs.)
10
Live for Sound Xi Series
Speakers
The Electro-Voice Xi-Series brings premium, tour- two and three-element, low-frequency line arrays. This
quality sound to installation. Inspired by the features of extraordinary low-frequency control is achieved through
EV's acclaimed X-Array touring systems, the Xi-Series optimized woofer placement in conjunction with presets
incorporates a potent combination of high-output and that overlap individual components (using All Pass Filters).
Install
ultra-linear short, medium, and long-throw systems in To achieve sound performance without compromises,
two-way, three-way, and four-way configurations. Xi-Series Xi-Series is designed for multi-way active operation,
loudspeakers incorporate the acoustic advantage of EV's except the Xi-1082, which contains a passive crossover
Ring-Mode Decoupling (RMD™), and features HP horns network.Xi-Series is made of 18 mm, 13-ply birch plywood
to secure excellent directivity control and even coverage. finished in black, textured paint and full-face protected
The three-way systems can be operated in a Vertical by a powder-coated, steel front-grille backed with foam.
Beam Shaping (VBS) configuration using EV digital signal These horn-loaded systems, except Xi-1123A/106F and
processors or EV DSP-equipped amplifiers.This unique Xi-212A3/106F, have an identical footprint for an uniform
approach extends the vertical coverage angle control as look. All systems, except the Xi-1082, have integrated
low as 125Hz - well below that permitted by the mid-bass handles and two L-Tracks on the top and bottom. A
horn alone (about 800Hz). These can be thought of as detailed "Flying manual" is available.
Xi-1082
• 2-Way Full-range • Typical under-balcony slant also perfect
• Vented LF enclosure • for front-stage and near-field use
• 1.25" voice coil (titanium diaphragm) • 2 x 3/8"-16 mounting bracket inserts
Xi-1122A/85F Xi-1152A/64F Xi-1152A/94F

• 2-Way Full-range • 2-Way Full-range
• Vented LF enclosure • Solid bass down to 50 Hz (-3 dB)
• 3" voice coil (titanium diaphragm) HF • Vented LF enclosure
• Integrated 35 mm stand mount • 3" voice coil (titanium diaphragm) HF
• Trapezoidal (15° per side) • Integrated 35 mm stand mount
• Trapezoidal (15° per side)
Xi-1123A/106F Xi-2123A/106F
• 3-Way High-Output Full-range • VBS mode brings vertical directivity
• Vented slot load designed LF enclosure control down to 250 Hz
• Horn-loaded MB/HF section fully rotatable • Excellent directivity 500 Hz – 16 kHz
• 3" voice coil (titanium diaphragm) HF • Trapezoidal (9° per side)
• Bypassable MB/HF passive crossover
11
Xi-Series Live for Sound
Speakers
Xi-1191A Xi-2181A Xi-1122MHA/64F

• 60° x 40° for near and mid field
Install
• 1 x 18" Subwoofer 1191 (F)

• 2 x 18" Subwoofer 2181 (F) • MB/HF section horn-loaded
• Vented design • Excellent directivity control
• Superior linear excursion capability • Trapezoidal (9° per side)
• Accurate transient detail trapezoidal (9° per side) • 3" voice coil (titanium diaphragm) HF
Xi-1183A/64F Xi-1153A/64F
• 3-Way High-Output Full-range • VBS for vertical directivity control down to 300 Hz
• Vented slot load designed LF enclosure • Excellent directivity control
• Coaxial horn-loaded MB/HF section fully rotatable • Trapezoidal (9° per side)
• 3" voice coil (titanium diaphragm) HF
Xi-2122MHA
• 2-Way output Far-field • Trapezoidal (9° per side)
• MB/HF section horn-loaded • 3" voice coil (titanium diaphragm) HF
• Excellent directivity control
Xi-2153A/64F
• 3-Way High-Output Full-range • VBS mode brings vertical directivity
• Vented slot load designed LF enclosure control down to 150 Hz
• Coaxial horn-loaded MB/HF section fully rotatable • Excellent directivity control
• 3" voice coil (titanium diaphragm) HF • Trapezoidal (9° per side)
12
Live for Sound Xi-Series
Xi-1082 Xi-1122A/85F Xi-1152A/64F Xi-1152A/94F
Speakers
Frequency Range (-3 dB) 50 Hz - 20 kHz 58 Hz - 17 kHz 50 Hz - 16 kHz 50 Hz - 16 kHz
Recommended High-Pass Frequency 60-80 Hz (12 dB/Oct.) Dx46 preset Dx46 preset Dx46 preset
Axial Sensitivity SPL 1W/1m 90 dB 99/110 dB 98/113 dB 98/112 dB
Max. SPL / 1m (calc.); full space 118 dB 130/135 dB 132/138 dB 132/137 dB
Long-Term Power Handling 175 W 300/75 W 600/75 W 600/75 W
Short-Term Power Handling (Peak) 700 W 1.200/300 W 2.400/300 W 2.400/300 W
Coverage (nominal -6 dB) H° x V° 90° x 40° (CD Horn) 80° x 55° (CD Horn) 60° x 40° (CD Horn) 90° x 40° (CD Horn)
Directivity Index 11.2 dB (+1.8/-2.7 dB) 10.9 dB (+1.2/-2.9 dB) 13.4 dB (+1.3/-2.3 dB) 12.3 dB (+0.7/-1.5 dB)
2.000 - 20.000 Hz 1.200 - 16.000 Hz 1.200 - 16.000 Hz 1.200 - 16.000 Hz
LF woofer (transducer) 8” (---) 12” (DL-type) 15” (EVX-155) 15” (EVX-155)
HF throat diameter (transducer) 1” (DH3) 1.4” (ND6-16) 1.4” (ND6-16) 1.4” (ND6-16)
Crossover Frequencies 3,500 Hz (passive) Dx46 preset Dx46 preset Dx46 preset
Nominal Impedance 8Ω 8 Ω/16 Ω 8 Ω/16 Ω 8 Ω/16 Ω
Minimum Impedance 5.8 Ω 8.5 Ω/13.4 Ω 6.3 Ω/14.0 Ω 6.3 Ω/12.2 Ω
Input Connections barrier strip 2 four-pin Speakon 2 four-pin Speakon 2 four-pin Speakon
Dimensions (H x W at front x D) 235 x 488 x 285 mm 584 x 375 x 356 mm 759 x 450 x 413 mm 759 x 450 x 413 mm
Install
9.25” x 11.21” x 11.22” 22.99” x 14.76” x 14.01” 29.88” x 17.72” x 16.26” 29.88” x 17.72” x 16.26”
Net Weight 13.3 kg (29.3 lbs.) 31.3 kg (69 lbs.) 40.8 kg (89.9 lbs.) 40.8 kg (89.9 lbs.)
Xi-1123A/106F Xi-2123A/106F Xi-1183A/64F Xi-1153A/64F Xi-1122MH64

Frequency Range (-3 dB) 75 Hz - 17 kHz 62 Hz - 18 kHz 66 Hz - 17 kHz 48 Hz - 17 kHz 125 Hz - 20 kHz
Recommended High-Pass Frequency Dx46 preset Dx46 preset Dx46 preset Dx46 preset Dx46 preset
Axial Sensitivity SPL 1W/1m 96/107/112 dB 100/107/112 dB 96/107/112 dB 91.5/107/112 dB 110/112 dB
Max. SPL / 1m (calc.); full space 129/140/137 dB 135/140/137 dB 128/138/137 dB 125/138/137 dB 141/137 dB
Long-Term Power Handling 300/300/75 W 600/300/75 W 600/300/75 W 600/300/75 W 300/75 W
Short-Term Power Handling (Peak) 1.200/1.200/300 W 2.400/1.200/300 W 2.400/1.200/300 W 2.400/1.200/300 W 1.200/300 W
Coverage (nominal -6 dB) H° x V° 100° x 60° (CD Horn) 100° x 60° (CD Horn) 60° x 40° (CD Horn) 60° x 40° (CD Horn) 60° x 40° (CD Horn)
Directivity Index 10.3 dB (+1.4/-1.2 dB) 10.1 dB (+1.6/-3.5 dB) 13.3 dB (+1.4/-1.1dB) 13.3 dB (+1.4/-1.1dB) 13.4 dB (+2.0/-1.8 dB)
500 - 16.000 Hz 160 - 16.000 Hz 800 - 16.000 Hz 800 - 16.000 Hz 800 - 16.000 Hz
LF woofer (transducer) 12” (DL-type) 2 x 12” (DL-type) 18” (EVX-180B) 15” (EVX-155) ---
MB woofer (transducer) 10” (DL-type) 10” (DL-type) 12” (ND-12) 12” (DL12ST) 12” (ND-12)
HF throat diameter (transducer) 1.4 (ND6-16) 1.4 (ND6-16) 1.4” (ND6-16) 1.4” (ND6-16) 1.4” (ND6-16)
Crossover Frequencies Dx46 preset Dx46 preset Dx46 preset Dx46 preset Dx46 preset
Nominal Impedance 16 Ω/12 Ω/16Ω 8 Ω/12 Ω/16Ω 8 Ω/12 Ω/16Ω 8 Ω/12 Ω/16 16 Ω/16
Minimum Impedance 9.2 Ω/8.5 Ω/14.6 Ω 4.6 Ω/8.5 Ω/14.6 Ω 7.1 Ω/8.7 Ω/14.6 Ω 7.4 Ω/8.7 Ω/14.6 9.9 Ω/12.9
Input Connections 2 eight-pin Speakon 2 eight-pin Speakon 2 eight-pin Speakon. 2 eight-pin Speakon. 2 eight-pin Speakon
Dimensions (H x W at front x D) 801 x 456 x 473 mm 1007 x 456 x 473 mm 914 x 586 x 759 mm 914 x 586 x 759 mm 596 x 584 x 759 mm
31.54” x 17.95 x 18.62” 39.65” x 17.95” x 18.62” 36” x 23.07” x 29.88” 36” x 23.07” x 29.88” 23.47” x 22.99” x 29.88”
Net Weight 52.2 kg ( 115 lbs.) 68.0 kg (149.9 lbs.) 93.0 kg (205 lbs.) 93.0 kg (205 lbs.) 61 kg (136 lbs.)
Xi-2153A/64 F Xi-1191A (F) Xi-2181A (F) Xi-2122MHA/42F

Frequency Range (-3 dB) 55 Hz - 18 kHz 37 Hz - 160 Hz 38 Hz - 160 Hz 120 Hz - 16 kHz
Recommended High-Pass Frequency Dx46 preset Dx46 preset Dx46 preset Dx46 preset
Axial Sensitivity SPL 1W/1m 100/107/112 dB 94 dB 99 dB 112/116 dB
Max. SPL / 1m (calc.); full space 133/138/137 dB 128 dB 136 dB 146/144 dB
Long-Term Power Handling 1.200/300/75 W 600 W 1.200 W 600/150 W
Short-Term Power Handling (Peak) 4.800/1.200/300 W 2.400 W 4.800 W 2.400/600 W
Coverage (nominal -6 dB) H° x V° 60° x 40° (CD Horn) essentially omni essentially omni 40° x 20°(CD Horn)
Directivity Index 13.4 dB (+1.4/-1.2 dB) 2.7 dB (+1.0/-0.6dB) 3.4 dB (+1.4/-0.9dB) 17.2 dB (+2.0/-2.7 dB)
800 - 16.000 Hz 63 - 100 Hz 63 - 200 Hz 800 - 16.000 Hz
LF woofer (transducer) 2 x 15” (EVX-155) 18” (EVX-180B) 2 x 18” (EVX-180B) ---
MB woofer (transducer) 12” (DL12ST)) --- --- 2 x 12” (ND12)
HF throat diameter (transducer) 1.4” (ND6-16) --- --- 2 X 1.4” (ND6-16)
Crossover Frequencies Dx46 preset Dx46 preset Dx46 preset Dx46 preset
Nominal Impedance 4 Ω/12 Ω/16Ω 8Ω 2x8Ω 6 Ω/8Ω
Minimum Impedance 3.8 Ω/8.7 Ω/14.6 Ω 6.7 Ω 2 x 6.0 Ω 4.9 /7.3
Input Connections 2 eight-pin Speakon 2 eight-pin Speakon 2 eight-pin Speakon 2 eight-pin Speakon
Dimensions (H x W at front x D) 1.233 x 586 x 759 mm 914 x 586 x 759 mm 914 x 586 x 759 mm 914 x 584 x 759 mm
48.54” x 23.07” x 29.88” 35.98” x 23.07” x 29.88” 35.98” x 23.07” x 29.88” 35.98” x 22.99” x 29.88”
Net Weight 109 kg (240 lbs.) 68.0 kg (149.9 lbs.) 83.5 kg (184 lbs) 86.3 kg (190 lbs.)
13
EVA - Expandable Vertical Array Live for Sound
Speakers
The EVA series (Expandable Vertical Array) is an elegantly allows up to eight EVA boxes to be powered by a single
simple solution for installed sound applications. EVA offers amplifier channel with no additional DSP required. The
true line-array performance from the patented Hydra plane internal hidden rigging not only looks great, but also makes
Install
wave generator. The sophisticated internal crossover EVA incredibly easy to install.
EVA-2082S 1220 Full-Range Dual Element Line Array Module

• True line-array performance • architecturally pleasing
• 120° horizontal coverage pattern • Three finishes available – indoor, PI and fiberglass
• 20° vertical coverage pattern • EVADA (EVA Design Assistant) software tool
• 104 dB sensitivity • Single amplifier channel drive
• Hidden suspension hardware (included) configuration for entire array
• Advanced sixth-order crossover
network with HF protection

• True line array performance • EVADA (EVA Design Assistant) software tool
• 120° horizontal coverage pattern • Single amplifier channel drive
• 6° vertical coverage pattern configuration for entire array
• 104 dB sensitivity • Advanced sixth-order crossover
• Hidden suspension hardware (included) network with HF protection
– architecturally pleasing
• Three finishes available – indoor, PI and fiberglass

• True line-array performance • Three finishes available – indoor,
• 90° horizontal coverage pattern PI and fiberglass
• 6° vertical coverage pattern • EVADA (EVA Design Assistant) software tool
• 104 dB sensitivity • Single amplifier channel drive
• Hidden suspension hardware (included) – configuration for entire array
architecturally pleasing • # Advanced sixth-order crossover

• True line-array performance • EVADA (EVA Design Assistant) software tool
• 90° horizontal coverage pattern • Single amplifier channel drive
• 2° vertical coverage pattern configuration for entire array
• 104 dB sensitivity • Advanced sixth-order crossover
• Hidden suspension hardware (included) network with HF protection
– architecturally pleasing
• Three finishes available – indoor, PI and fiberglass
14
Live for Sound EVA - Expandable Vertical Array
Speakers
EVA-1151D Single 15-inch subwoofer
• DVX3159A 15” (381 mm) LF transducer • architecturally pleasing
with fully symmetric drive • Three finishes available – indoor, PI and fiberglass
• System rating: 500 W continuous, 2000 W peak • EVADA (EVA Design Assistant) software tool
• Easily configures to cardioid directional pattern • Single amplifier channel drive
for low-frequency control and feedback reduction configuration for entire array
• Hidden suspension hardware (included) • Advanced sixth-order crossover
EVA-2151D Dual 15-inch subwoofer

• Dual DVX3159A 15” (381 mm) LF • architecturally pleasing
transducers with fully symmetric drive • Three finishes available – indoor, PI and fiberglass
• System rating: 1000 W continuous, 4000 W peak • EVADA (EVA Design Assistant) software tool
• Easily configures to cardioid directional pattern • Single amplifier channel drive
for low-frequency control and feedback reduction configuration for entire array
Install
• Hidden suspension hardware (included) • Advanced sixth-order crossover
EVA has an internal, nearly invisible rigging EVA-SG2 (Standard Grid)

system. Modules are connected to one another For typical tilt angles in 3 and 4 module arrays
with an internal top-to-bottom metal structure and pull-up applications in large arrays when
that is hidden by the cover panels. This gives extreme angles are required. Includes one
an EVA cluster great aesthetic appeal—more spreader bar.
an architectural element than a loudspeaker EVA-EG2 (Extended Grid)
system. The rigging system is designed to For typical tilt angles in arrays taller than four
carry an array of up to eight modules with a modules, or extreme angles in arrays of four
safety factor of >8:1. modules or less. Includes one spreader bar.
EVA-2082S 1220 EVA-2082S 126 EVA-2082S 906 EVA-2082S 920 EVA-1151D EVA-2151D
Frequency Response 60 - 19000 Hz 50 - 160 45 - 160
(-3 dB)
Recommended High- 50 Hz 35 Hz 35 Hz
Pass Frequency
Sensitivity 1 W/1 m 104 dB 3 module array 94 dB (Whole Space) 97 dB (Whole Space)
Max. SPL/1m (calc) 135 dB 127 (Whole Space) 133 (Whole Space)
System Power Handling 350 Watts 500 Watts 1000 Watts

(Continuous/Program/
Peak)
Nominal Impedance 16 Ω 8Ω 4Ω
(Passive)
Input Connections Phoenix/Euroblock style screw terminals Phoenix Euroblock Phoenix Euroblock
Frequency Response 45 - 20000 Hz 39 - 160 33 - 160

(-10 dB)
Coverage(Nominal -6 120 ° 120 ° 90 ° 90 ° Omnidirectional Omnidirectional

dB) H°
Coverage(Nominal -6 20 ° 6° 6° 20 ° Omnidirectional Omnidirectional

dB) V°
LF Transducer (2) EVS2008, 8 In (203mm) Driver DVX3159A DVX3159A (X2)
HF Transducer (4) DH2005, 1.25 In (32mm) Diaphragm Compression Driver None None
Crossover Frequency 1740 Hz 100 Hz Active 100 Hz Active
Minimum Impedance 12 Ω 6Ω 3Ω
Enclosure Material Birch and Pine Plywood Birch Plywood Birch Plywood
Grill 16 GA Galvanneal, Powder-coated (PI Version - Stainless Steel with Hydrophobic Cloth
Suspension EVA Grid (Sold Separately)
Height 20.17 in (512.2 mm) 20.25 in (514.4 mm) 20.25 in (514.4 mm) 20.17 in (512.2 mm) 23.5" (596.9mm) 31.0" (787.4mm)
Width 23.5 in (596.9 mm) 23.5 in (596.9 mm) 23.5 in (596.9 mm) 23.5 in (596.9 mm) 23.5" (596.9mm) 23.5" (596.9mm)
Depth 14.53 in (369.1 mm) 14.1 in (358.2 mm) 14.1 in (358.2 mm) 14.53 in (369.1 mm) 18.16" (461.3mm) 31.32" (795.5mm)
Weight Net 76.19 lbs (34.513.23 lbs (6 kg)) 79.06 lbs (35.813.23 lbs (6 kg)) 79.06 lbs (35.813.23 lbs (6 kg)) 76.19 lbs (34.513.23 lbs (6 kg)) 100 Lbs 172 Lbs
15
EVH - Horn Load Live for Sound
Speakers
The global success of the FRX and FRX+ series This premium component provides improved dynamic
affirms Electro-Voice’s approach to coaxial horn-loaded performance, including reduced distortion and power
loudspeakers for venues of all sizes. The EVH series compression.
condenses all this experience into a new, dedicated
Install
solution for installed sound applications. EVH represents EVH series features include
a unique design concept: maintain directivity control all • All-new high performance components in choice of two
the way down to 500 Hz in a mid-sized, 15-inch two-way, configurations (“S” & “D”)
coaxial horn-loaded configuration that offers exceptional • Six available coverage patterns on rotatable Constant
value, while providing an unusually high degree of rigging DirectivityTM waveguides
flexibility and six available coverage patterns (ranging from
60 x 40 to 90 x 90). • Advanced fourth-order crossover network with HF
protection
EVH loudspeakers are available with a choice of two • (28) M10 threaded suspension points
woofer/compression driver combinations. The EVH-1152S
• PI (indirect weather exposure) version available, with
is equipped with an SMX215115-inch 400-W woofer
gland nut and stainless-steel grille
and one ND2B medium-format, 2-inch diaphragm, 40-W
high-frequency compression driver on a 12-inch-square • Unique input panel – designed from installer’s
waveguide. The EVH-1152D features the same woofer perspective with a range of innovative, user-friendly
and the new DH7N large-format compression driver with a features
3-inch diaphragm and neodymium magnetic structure. • Wide range of available rigging options and accessories
EVH-1152S Two-Way Coaxial Full-Range High-Efficiency Loudspeaker System

• ND2B 2" (51 mm) diaphragm 1.4(36 mm)- • 106 dB sensitivity, 139 dB maximum SPL
exit pure titanium compression driver • System rating: 500 W continuous, 2000 W peak
• SMX2151 15" (381 mm) LF transducer • Active rating: LF 400 W / HF 40 W
with fully symmetric drive continuous (1600 W / 160 W peak)
• Advanced fourth-order crossover • (28) M10 threaded suspension points
network with HF protection • PI and FG version available with gland
• Various coverage patterns: Constant nut and stainless steel grille
Directivity rotatable waveguides
EVH-1152D Two-Way Coaxial Full-Range High-Efficiency Loudspeaker System

• DH7N 3" (76 mm) diaphragm 1.4(36 mm)- • 106 dB sensitivity, 139 dB maximum SPL
exit pure titanium compression driver • System rating: 500 W continuous, 2000 W peak
• Advanced fourth-order crossover • M10 threaded suspension points
network with HF protection • PI and FG version available with gland
• Various coverage patterns: Constant nut and stainless steel grille
Directivity rotatable waveguides
16
Live for Sound EVH - Horn Load
Speakers
EVH- EVH- EVH- EVH- EVH- EVH-
1152S/43 1152S/64 1152S/66 1152S/94 1152S/96 1152S/99
Frequency Response (-3 dB) 60 – 15000 Hz1
Recommended High-Pass Frequency 60 Hz
Sensitivity 1 W/1 m 106 dB 105 dB 104 dB
Max. SPL/1 m (Calculated) Peak 139 dB 138 dB 137 dB
System Power Handling (Continuous2/Program/Peak) 500 W / 1000 W / 2000 W
Nominal Impedance (Passive) 8Ω
Minimum Impedance 6Ω
Phoenix/Euroblock style screw terminals

Input Connections PI and FG versions include dual-gland-nut input-panel cover
Coverage (Nominal -6 dB) H° 40 ° 60 ° 60 ° 90 ° 90 ° 90 °
Coverage (Nominal -6 dB) V° 30 ° 40 ° 60 ° 40 ° 60 ° 90 °
LF Transducer SMX2151, 15-in (381 mm) Driver
Install
HF Transducer ND2B, 2-in (51 mm) Diaphragm Compression Driver
Internal Passive Crossover Frequency 1300 Hz
Enclosure Material 13-ply Weather-Resistant Birch
Standard versions: 16-ga Galvanneal, Powdercoat, with screen behind

Grille PI and FG versions: 18-ga Stainless, Powdercoat, with hydrophobic cloth behind
Standard versions: IEC 60529 IP33

Environmental PI and FG versions: IEC 60529 IP55
Suspension (28) M10 Threaded Points (one EBK-M10-EVI kit of four forged eyebolts included)
Height 30.26 in (768.6 mm)

Width 30.26 in (768.6 mm)
Depth 26.77 in (680.1 mm)
Net Weight 143 lb (64.9 kg)
EVH- EVH- EVH- EVH- EVH- EVH-

1152D/43 1152D/64 1152D/66 1152D/94 1152D/96 1152D/99
Sensitivity 1 W/1 m 106 dB 105 dB 104 dB
Max. SPL/1 m (Calculated) Peak 139 dB 138 dB 137 dB

HF Transducer DH7N, 3-in (76 mm) Diaphragm Compression Driver


Height 30.26 in (768.6 mm)

Width 30.26 in (768.6 mm)
Depth 26.77 in (680.1 mm)
Net Weight 145.5 lb (66.1 kg)
1 Half-space measurement in passive mode
2 EIA RS-426A (eight hours)
17
EVF - Front Load Live for Sound
Speakers
EVF is the most comprehensive series of front-loaded EVF series features include:
loudspeaker systems ever offered for installed sound. • Seven available coverage patterns aid the design process
Available in 12- or 15-inch two way configurations • High maximum SPL output capability with extremely
Install
with a range of coverage patterns, and enhanced with low distortion

dedicated low-frequency systems, EVF loudspeakers
match exceptional audio performance, efficiency, ease- • All 12- and 15-inch enclosures and the 18-inch subwoofer
of-use, and aesthetics with unprecedented value. EVF have the same height, promoting attractive clusters
systems employ the latest Electro-Voice components to • Biampable, but sophisticated internal crossover/EQ
ensure years of reliable use and consistently excellent networks make cost-saving passive operation very attractive
sound. “S”-designated systems are equipped with SMX
• Available in black or white in one of three versions:
series woofers and ND2B 2-inch compression drivers;
EVCoat™ (interior use), PI (indirect weather exposure),
“D”-designated systems are equipped with the highest-
and FG (fiberglass – direct exposure)
performance DVX series woofers and the new DH7N
3-inch compression driver. • Unique input panel – designed from installer’s
perspective with a range of innovative, user-friendly features
• Wide range of available rigging options and accessories
EVF- EVF- EVF- EVF- EVF- EVF-

1122S/64 1122S/66 1122S/94 1122S/96 1122S/99 1122S/126
Frequency Response (-3 dB) 58 – 16000 Hz1,2
Sensitivity 1 W/1 m 98 dB
Max. SPL/1 m (Calculated) Peak 131 dB



Height 30.26 in (768.6 mm)

Width 16 in (406.3 mm)
Depth 16.27 in (413.3 mm)
18
Live for Sound EVF - Front Load
Speakers
EVF-1122S Two-Way Full-Range Loudspeaker System
• ND2B 2” (51 mm) diaphragm, 1.4” (36 mm)- • 98 dB sensitivity, 131 dB maximum SPL
exit pure titanium compression driver • System rating: 500 W continuous, (2000 W peak)
• SMX2121 12” (305 mm) LF transducer • Active rating: LF 400 W / HF 40 W
Install
• Advanced fourth-order crossover • # (22) M10 threaded suspension points
network with HF protection • # PI version available with gland
• Coverage pattern: 120° x 60° Constant nut and stainless steel grille
Directivity™ 12” rotatable waveguide
Mobile Audio
EVF-1152S Two-Way Full-Range Loudspeaker System
• ND2B 2" (51 mm) diaphragm 1.4" (36 mm)- • 101 dB sensitivity, 134 dB maximum SPL
network with HF protection • PI version available with gland nut
• Coverage pattern: 40° x 30° Constant and stainless steel grille
Directivity™ 12" rotatable waveguide

1152S/43 1152S/64 1152S/66 1152S/94 1152S/96 1152S/99
Sensitivity 1 W/1 m 101 dB
Max. SPL/1 m (Calculated) Peak 134 dB



Height 30.26 in (768.6 mm)

Width 18.5 in (469.8 mm)
Depth 18.37 in (466.6 mm)
1 Half-space measurement in passive mode

2 FG (full outdoors) versions have no enclosure vents, somewhat reducing their low frequency response
3 EIA RS-426A (eight hours)
19
Speakers
EVF-1122D Two-Way Full-Range Loudspeaker System

Install
• ND2B 2” (51 mm) diaphragm, 1.4” (36 mm)- • 98 dB sensitivity, 131 dB maximum SPL
• SMX2121 12” (305 mm) LF transducer • Active rating: LF 400 W / HF 40 W
• Advanced fourth-order crossover • # (22) M10 threaded suspension points
network with HF protection • # PI version available with gland
• Coverage pattern: 120° x 60° Constant nut and stainless steel grille
Directivity™ 12” rotatable waveguide

1122D/64 1122D/66 1122D/94 1122D/96 1122D/99 1122D/126
Sensitivity1 1 W/1 m 97 dB
Max. SPL/1 m (Calculated)1 131 dB

LF Transducer DVX3121A, 12-in (305 mm) Woofer


Height 30.26 in (768.6 mm)

Depth 16.27 in (413.3 mm)
20
Live for Sound EVF - Front Load
Speakers
EVF-1152D Two-Way Full-Range Loudspeaker System
Install
• ND2B 2" (51 mm) diaphragm 1.4" (36 mm)- • 101 dB sensitivity, 134 dB maximum SPL
network with HF protection • PI version available with gland nut
• Coverage pattern: 40° x 30° Constant and stainless steel grille
Directivity™ 12" rotatable waveguide

1152D/43 1152D/64 1152D/66 1152D/94 1152D/96 1152D/99
Sensitivity1 1 W/1 m 100 dB
Max. SPL/1 m (Calculated)1 134 dB

LF Transducer DVX3151A, 15-in (381 mm) Woofer


Height 30.26 in (768.6 mm)

Width 18.5 in (496.8 mm)
Depth 18.37 in (466.6 mm)
21
Speakers
EVF-1121S Front-Loaded Bass Element EVF-1181S Front-Loaded Subwoofer

• EVS18SB 18" (457
• EVS12SB 12" (305 mm) LF transducer
mm) LF Transducer
• 103 dB sensitivity, 135 dB maximum SPL
• 99 dB sensitivity, 131
• System rating: 400 W
Install
dB maximum SPL
continuous, 1600 W peak
• (22) M10 threaded suspension points
• Passive network included
• (28) M10 threaded
suspension points
EVF-1151S Front-Loaded Bass Element EVF-2151D Front-Loaded Subwoofer

• Dual DVX3159A (381mm)
• EVS15SB 15" (381 mm) LF transducer
LF Transducers
• 103 dB sensitivity, 135 dB maximum SPL
• 101 dB sensitivity, 137 dB
maximum SPL
continuous, (1600 W peak)
EVF-1121S EVF-1151S EVF-2121S EVF-1181S EVF-2151D
Frequency Response (-3 dB) 70 – 98 Hz1,2 67 – 95 Hz1,2 54 – 145 Hz1,2 35 – 100 Hz1,2 40 – 2600 Hz1,2
Frequency Response (-10 dB) 48 – 120 Hz1,2 46 – 124 Hz1,2 41 – 330 Hz1,2 28 – 650 Hz1,2 30 – 3200 Hz1,2
Recommended High-Pass Frequency 50 Hz 35 Hz 45 Hz 33 Hz 35 Hz
Internal Passive Low-Pass Filter 100 Hz, 12 dB per octave none none none
Sensitivity 1 W/1 m 103 dB 100 dB 99 dB 101 dB
Max. SPL/1 m (Calculated) Peak 135 dB 135 dB 131 dB 137 dB
System Power Handling (Continuous3/Program/Peak) 400 W / 800 W / 1600 W 800 W / 1600 W / 3200 W 400 W / 800 W / 1600 W 1000 W / 2000 W / 4000 W
Passive: 4 Ω Passive: N/A Passive: N/A Passive: N/A

Nominal Impedance Biamp: 8 Ω Biamp: 4 Ω Biamp: 8 Ω Biamp: 4 Ω
Passive: 3.4 Ω
Passive: N/A Passive: N/A Passive: N/A
Minimum Impedance Biamp: 5.5 Ω Biamp: 6.4 Ω Biamp: 2.8 Ω Biamp: 6 Ω Biamp: 2.7 Ω

Coverage (Nominal -6 dB) H° Omnidirectional in normal operating range
Coverage (Nominal -6 dB) V° Omnidirectional in normal operating range
EVS15SB, 15-in (381 mm) Two EVS12SB, 12-in (305 mm) Two DVX3159A, 15-in (381
Transducer EVS12SB, 12-in (305 mm) Driver Driver Driver EVS18SB, 18-in (457 mm) Driver mm) Drivers


(28) M10 Threaded Points (one (28) M10 Threaded Points (one
EBK-M10-EVI kit of four forged EBK-M10-EVI kit of four forged
Suspension (22) M10 Threaded Points (one EBK-M10-EVI kit of four forged eyebolts included) eyebolts included) eyebolts included)
Height 30.26 in (768.6 mm) 30.26 in (768.6 mm) 30.26 in (768.6 mm) 30.26 in (768.6 mm) 30.26 in (768.6 mm)
Width 16.0 in (406 mm) 18.5 in (470 mm) 18.5 in (470 mm) 26.6 in (675.6 mm) 26.6 in (675.6 mm)
Depth 16.27 in (413.3 mm) 18.4 in (467 mm) 18.4 in (467 mm) 28.6 in (726.4 mm) 28.6 in (726.4 mm)
Net Weight 57.7 lb (26.2 kg) 62.6 lb (28.4 kg) 82.4 lb (37.4 kg) 101.2 lb (45.9 kg) 117 lb (53.1 kg)
22
Live for Sound FRi Series
Speakers
The FRi+ Series brings premium Electro-Voice® installations that require flexibility and performance.
components, including the DH7 compression driver and Numerous threaded mounting points help make
DL series woofers, to a new level of affordability. The suspension easy, and allow for installation in any situation.
Install
FRi+ Series provides exceptional value for permanent
FRi-2082/28LPM FRi Series Speaker System

• 2-Way Full-range • 45° angle allows under-balcony, on-wall
• Vented LF enclosure and stage monitoring applications
• 1" voice coil • Only FRi-2082 comes with mounting bracket!
• Low-profile slanted design • 2 x 3/8"-16 suspension points
FRi-2082
Frequency Range (-10 dB) 55 Hz - 18 kHz
Recommended High-Pass Frequency 50 Hz (12 dB/Oct.)
Axial Sensitivity SPL 1W/1m 93 dB
(Biamp mode)
Max. SPL /1 m (calc.); full space 122 dB
Continuous Power Handling (Biamp op.) 200 W
Peak Power Handling (Peak) 800 W
Coverage (nominal -6 dB) (H° x V°) 100° x 100° (CD Horn)
LF woofer (transducer) 50mm x 203 mm (2” x 8”)
HF throat diameter (transducer) 25 mm (1”) (compr. driver)
Crossover Frequencies 2,800 Hz
Nominal Impedance (Biamp) 8Ω
Input Connections Barrier strips
Dimensions (H x W at front x D) 222 x 620 x 356 mm

8.75” x 24.5” x 14”
Net Weight 18.2 kg (40 lbs.)
23
EVI Series Live for Sound
Speakers
EVI provides an economical solution for permanent towards the back. The Variable Intensity horn delivers six
installations that require coverage over a rectangular area. to eight dB more SPL to the back of the room, overcoming
In a typical room, the distance from the loudspeaker to level loss without resorting to the expense and complexity
Install
the last row is two or more times the distance to the front of additional systems or components.
row, resulting in a substantial loss of level and intelligibility
EVI-12 EVI Series Speaker Systems

• Two-way, full-range loudspeaker • PRO™ Driver protection circuit
• High sensitivity • Time Path™ phasing plug
• Vented LF enclosure • Multi-angled housing
• 1.25" voice coil (titanium diaphragm) HF • Five 3/8"-16 hanging points

• Two-way, full-range loudspeaker • PRO™ Driver protection circuit
• High sensitivity • Time Path™ phasing plug
• Vented LF enclosure • Multi-angled housing
• 1.25" voice coil (titanium diaphragm) HF • Five 3/8"-16 hanging points

• Two-way, full-range loudspeaker • Stacked, frequency-shaded woofers maintain
• Vented LF enclosure vertical coverage angle down to 500 Hz with
• 1.25" voice coil (titanium diaphragm) HF 120° (typical 180°); ideal for reverberant rooms
• PRO™ Driver protection circuit • Three 3/8"- hanging points
• Time Path™ phasing plug
• Multi-angled housing
24
Live for Sound EVI Series
Speakers
EVI Vari Intense® coverage pattern (3-2-1 Rule):
If speaker height = H, then coverage length = 3H, coverage width = 2H, and first row coverage = 1H
Install
H
W H
idt
h
=
2H
3H
th =
Leng
EVI-12 EVI-15 EVI-28
Frequency range (-3 dB) 50 Hz–20 kHz 50 Hz–20 kHz 60 Hz–20 kHz
Sensitivity (SPL 1 W/1 m) 99.5 dB 100 dB 93 dB
Max. SPL/1m (calc.) 129 dB 129.5 dB 123.5 dB
Long-term power handling 250 W 250 W 250 W
Short-term power handling 1,000 W 1,000 W 1,000 W
Coverage (H° x V°) LT-60° x 70°, ST= 110° x 90° 60° x 65° 65° x 65°
LF driver 12” 15” 2 x 8”
HF driver (exit) 1” (DH2010A) 1” (DH2010A) 1” (DH2010A)
Crossover frequency 2,000 Hz 2,000 Hz 2,000 Hz
Nominal impedance (minimum) 8Ω 8Ω 8Ω
Input connections screw terminal screw terminal screw terminal
Dimensions (H x W at front x D) 554 x 356 x 699 mm 584 x 429 x 766 mm 353 x 496 x 523 mm
21.8” x 14” x 27.5” 23” x 16.9” x 30.2” 13.9” x 19.5” x 20.6”
Net weight 21.8 kg (48 lbs) 24.0 kg (53 lbs) 16.3 kg (36 lbs)
25
EVID Series Live for Sound
Speakers
EVID speakers beautify not only the sound of a room, at home in retail environments, boardrooms, restaurants,
but also the looks. Designed to have best in class sonic and bars.
characteristics and stunning high fidelity, EVID is typically
Install
EVID 3.2 EVID Series Premium Surface-Mount Speaker System

Mobile Audio
• Two-way full range • Three-dimensional ellipse (for compact look)

• Vented LF enclosure • Magnetically shielded for video applications
• 0.75" voice coil (titanium diaphragm) with • Comes with Strong Arm Mount (SAM™) and a hex key
Neodymium magnetic structure • Suspension insert for SAM™; safety point on rear side
• Full-bandwidth overload protection for HF and LF
EVID 4.2 EVID Series Premium Surface-Mount Speaker System

• Two-way full range • Full bandwidth overload protection for HF and LF
• Vented LF enclosure • Three-dimensional ellipse (for compact look)
• 1" voice coil (titanium diaphragm) with • Magnetically shielded for video applications
Neodymium magnetic structure • Comes with Strong Arm Mount (SAM™) and a hex-key
• HF section features Coherent Coverage • Suspension insert for SAM™, safety point on rear side
Waveguide™ to minimize interference
EVID 6.2 EVID Twin 6" Surface-Mount Speaker System

• Two-way, high-output full range • Full bandwidth overload protection for HF and LF
• Vented LF enclosure • Three-dimensional ellipse (for compact look)
• High sensitivity • Magnetically shielded for video applications
• 1" voice coil (titanium diaphragm) with • Comes with Strong Arm Mount (SAM™) and a hex key
Neodymium magnetic structure • Suspension insert for SAM™; safety point on rear side
• HF section features Coherent Coverage
Waveguide™ to minimize interference
EVID 12.1 EVID Series Premium Surface-Mount Subwoofer

• Subwoofer • Comes with mounting bracket (passed EIA 636 at a
• Slot-loaded port design safety factor of 8:1) for on-wall or corner mounting
• Dual-voice-coil, high-excursion transducer • One safety 3/8"-16 eyebolt included
• High sensitivity • Suspension inserts and 2 x 3/8" hanging inserts
• Built-in stereo crossover with high-pass output • Powered version (120v only) available
• Trapezoidal
26
Live for Sound EVID Series
Speakers
EVID FM 4.2 EVID Series InWall Speaker System
• 4” woofer, 4” passive radiator, and a 1” • Shallow profile allows installation virtually anywhere.
tweeter provide high quality sound • Secure phoenix style pass through connectors
• Fully sealed enclosures provides superior for easy wiring and installation.
sound isolation from adjacent rooms. • Four point “quick mounting” tabs provide
• Tuned passive radiator design ensures consistently fast easy installation in anywall cavity.
superior performance in any installation. • The transformer is mounted on the rear can
• Either 70v/100v or 8 ohm operation is surface to further enhance stiffness.
standard on both models. No need to • Specially designed ribbed back can
buy or stock special versions. is designed to eliminate flexing.
EVID FM 6.2 EVID Series InWall Speaker System
Install
• 6” woofer coupled with a 6” passive • Shallow profile allows installation virtually anywhere.
radiator for extended bass response • Secure phoenix style pass through connectors
• Fully sealed enclosures provides superior for easy wiring and installation.
sound isolation from adjacent rooms. • Four point “quick mounting” tabs provide
• Tuned passive radiator design ensures consistently fast easy installation in anywall cavity.
superior performance in any installation. • The transformer is mounted on the rear can
• Either 70v/100v or 8 ohm operation is surface to further enhance stiffness.
standard on both models. No need to • Specially designed ribbed back can
buy or stock special versions. is designed to eliminate flexing.
EVID 3.2/T EVID 4.2/T EVID 6.2/T EVID 12.1 EVID FM 4.2 EVID FM 6.2
Frequency response (-10 dB) 85 Hz–20 kHz 65 Hz–20 kHz 62 Hz–20 kHz 40 Hz–140 Hz 52 - 20000 Hz 52 - 20000 Hz
Sensitivity (SPL 1 W/1 m) 87 dB 89 dB 94 dB 100 dB 87 dB 90 dB
Max. SPL/1m (calc.) 112 dB 115 dB 122 dB 128 dB 110 dB 115 dB
Long-term power handling 75 W 100 W 150 W 175/175 W 50 W 75 W
Short-term power handling 300 W 400 W 600 W 700/700 W 200 W 300 W
Transformer taps 70V: 5 W 70V: 3.75 W 70V: 7.5 W — 1.75, 3.75, 7.5, 15, 30 7.5, 15, 30, 60 w at 70 v
at 70 v
(transformer version only) 100V: 10 W 70V/100V: 7.5 W, 15 W, 70V/100V:15 W, 30 W, —

30 W 60 W
Coverage (H° x V°) 140° x 100° 120° x 80° 100° x 80° — 150° x 150° 120° x 120°
LF driver 2” x 3.5” 2” x 4” 2” x 6” 12” 4 inch with 4 inch passive 6 inch with 6 inch passive
radiator radiator
HF driver 0.75” 1” 1” — 1 inch Titanium dome 1 inch Titanium dome

tweeter tweeter
Nominal impedance (non-transformer 8Ω 8Ω 8Ω 8Ω 8Ω 8Ω

version)
Minimum impedance (non-transformer 6Ω 6Ω 6Ω 6Ω — —

version)
Input connections spring terminal spring terminal spring terminal spring terminal 4 pin Phoenix 4 pin Phoenix
Dimensions (H x W at front x D) 234 x 127 x 165 mm 310 x 175 x 216 mm 419 x 228 x 298 mm 412 x 584 (at front) x 13.78 in (350 mm) 18.31 in (465 mm)
9.2” x 5.1” x 6.5” 12.2” x 6.9” x 8.5” 16.5” x 9” x 11.75” 305 mm 7.41 in (188.3 mm) 10.08 in (256 mm)
16.25” x 23” x 12” 3.76 in (95.6 mm) 3.95 in (100.3 mm)
Net weight (incl. mounting bracket) 1.5 kg (3.3 lbs) 3.9 kg (8.5 lbs) 5.3 kg (12 lbs) 18.1 kg (40 lbs) 6.39 lbs (2.9 kg) 12.79 lbs (5.8 kg)
27
EVID - ceiling speakers Live for Sound
Speakers
No matter what an installation calls for, EVID ceiling waveguide-coupled design of the C8.2HC for high-
speakers can fill the need. Each model is unique ceiling environments; the EVID ceiling line will solve any
and designed to meet the toughest “problem” job installation requirement. The EVID ceiling speaker line was
Install
specifications. Sonically superior and aesthetically designed with the contractor and listener in mind. Great
pleasing, the EVID ceiling speakers have no match. sound, simple installation, and exceptional value are part of
From the compact, powerful C4.2 to the exclusive every model.
EVID C4.2 EVID Series 4" Two-Way Ceiling System
• For use in air-handling spaces • No additional accessories needed

• 4" woofer for most installations
• Wave-guide coupled titanium-coated dome tweeter • Also available in black
• Three-point mounting system for easy installation
• Mounting support ring and tile rails included
EVID C8.2/C8.2LP EVID Series 8" Two-Way Ceiling System

• For use where a flush-mount design is desired • Mounting support ring and tile rails included
but demand for high-quality audio exists • No additional accessories needed
• Specially tuned enclosure for most installations
• 8" woofer • Also available in black
• 1waveguide-coupled tweeter for • Low profile back can (3shorter in depth)
coverage up to 18 kHz for tight fitting ceiling spaces (C8.2LP)
• Four-point mounting system
EVID C8.2HC EVID 8" Two-Way Pattern Control Ceiling System
• For use in high-ceiling, reverberant "problem" rooms • No additional accessories needed

• Exclusive ported, wave-guide coupled 8" driver for most installations
• Four-point mounting system • Patent-pending design
• Mounting support ring and tile rails included
28
Live for Sound EVID - ceiling speakers
Speakers
EVID C10.1 EVID Series Compact and Powerful Ceiling Subwoofer
• 10" subwoofer in tuned high performance enclosure • Mounting support ring and tile installations included
• Low-frequency performance down to 45 Hz • No additional accessories needed
• Flexible installation for most installations
• Four-point mounting system
EVID C12.2 High-Performance Ceiling Speaker System
Install
• For use in large venues including • Durable black powder-coat
high-ceiling applications • Tile bridge included for safe suspension
• Features EVID 920-8B transducer in a drop ceiling that uses mineral wool
• 12" coaxial with high power handling or other fiber-based ceiling tiles
and 100 dB sensitivity • Can also be suspended by an integrated 3/8"
• Integrated 64 W transformer allows for rigging point for use with threaded rod
use in 70 V/100 V applications • Can be mounted using the three pendant
• Automatic saturation compensation for distortion- mount tabs on the rear enclosure
free performance at high sound levels • Rear cover includes provisions for a junction box
• Transformer tap selection via a convenient fitting providing access to a four-pin, phoenix-
switch on the front of baffle type connector that allows direct connection
• Rear enclosure is constructed from heavy-gauge steel to the speaker with 12-gauge wire
EVID C4.2 EVID C8.2LP EVID C8.2HC EVID C10.1 EVID C.12.2
EVID C8.2
LF Transducer 4” 8” 8” 10” 12”
Polypropylene cone Polypropylene cone Polypropylene cone Polypropylene cone Polypropylene cone
+Waveguide
HF Transducer 19 mm (0.75”) 25 mm (1”) 25 mm (1”) 25 mm (1”)
Ti Mylar Laminate Dome Ti Mylar Laminate Dome Ti Mylar Laminate Dome
Frequency Response (-10 dB) 65 Hz - 20 kHz 50 Hz - 20 kHz 50 Hz - 20 kHz 45 - 180 Hz 65 Hz - 20 kHz
Power Handling(8 Ω) 80 W (overload protected) 100 W (overload protected) 100 W (overload protected) 150 W 100W
Coverage Pattern 130° conical 110° conical 75° conical (@ >1 kHz) 180° 90° average
Sensitivity (1W/1m) 86 dB 91 dB 93 dB 94 dB 100 dB
Input Configuration 8 Ω, 70 V, 100 V 8 Ω, 70 V, 100 V 8 Ω, 70 V, 100 V 8 Ω, 70 V, 100 V 8 Ω / 70V / 100V
Transformer Power Taps (W) (1.88*), 3.75, 7.5, 15, 30 (1.88*), 3.75, 7.5, 15, 30 (7.5*), 15, 30, 60 (7.5*), 15, 30, 60 (4*), 8, 16, 32, 64 ASC protected
Dimensions (H x Dia.) 176 x 181mm 178 x 270 mm/255 x 270 mm 303 x 320 mm 303 x 320 mm 333 x 414 mm
6.93” x 7.13” 7.01” x 10.65”/10.04” x 10.63” 11.99” x 12.60” 11.99” x 12.60”
Weight 2.7 kg (6.0 lbs.) 5.0 kg (11.0 lbs.) 6.0 kg (13.2 lbs.) 7.0 kg (15.4 lbs.) 12.3 kg
Acoustic Design Ported cabinet, internally damped Dual ported cabinet, Ported cabinet, internally damped
Two-Way, inc. passive crossover internally damped Two-Way inc. passive crossover
Cabinet Construction Steel enclosure and UL94V-0 rated baffle and bezel
Mounting System Integrated 3-point toggle anchors
Grille Construction Powder-coated steel
Available Colors White (paintable surface)
*70 V only*
29
S Series Mini Monitor Live for Sound
Speakers
A 5.25-inch, 120W, two-way monitor loudspeaker optimally vented, high-impact polystyrene enclosure. The
system. Ideal for distributed sound applications high-fequency section is a one-inch, direct-radiating,
that require high-quality sound reproduction. The soft-dome tweeter. The system’s circuits automatically
Install
lowfrequency section is a 5.25-inch direct-radiating reduce power delivery to drivers if threshold is exceeded,
woofer with a polypropylene cone installed in an reducing the possibility of driver failure.
S-40 S Series Speaker Systems
• Two-way, full-range ultracompact • Ferrofluid-cooled soft-dome tweeter

• Ultra-linear frequency response • Trapezoidal
• Vented LF enclosure • 2 x 1/4" –20 suspension points
• Full bandwidth protection circuit
for woofer and tweeter
S-40
Frequency range 85 Hz–20 kHz (+/- 3dB)
Sensitivity (SPL 1W/1m) 85 dB
Max. SPL/1m (calc.) 113 dB
Long-term power handling 120 W
Short-term power handling 640 W
Coverage (H° x V°) 100° x 100°
Directivity Index 9.8 dB (+3.8/-3.6 dB)

2 kHz–20 kHz
LF driver 5.25”
HF driver 1” Softdome
Crossover frequencies 3,500 Hz
Nominal impedance (low Z version) 4Ω
Minimum impedance (low Z version) 3.7 Ω
Input connections spring terminal
Dimensions (H x W at front x D) 249 x 178 x 150 mm

(9.8” x 7” x 5.9”)
Net weight (including mounting bracket) 2.6 kg (5.7 lbs.)
30
Live for Sound ZX/ZXA Series
Speakers
The Advanced Generation of Versatile, High-Performance, New, high-power woofers and drivers, contemporary
Lightweight Speakers. Building upon decades of styling, and innovative mechanical solutions for all
experience manufacturing lightweight, molded enclosures permanent installation and mobile stage applications make
Install
with high-end components, ZX loudspeakers comprise a ZX the new standard in lightweight sound.
new family that takes audio technology to the next level.
Mobile Audio
ZX1 Composite 8" two-way
• EV8L high performnace 8"woofer • Integrated pole-mount adapter and handle
• Exclusive port design for extended LF response • 4 metric inserts for additional mounting options
• 200W cont., 400W program power handling, • 2 Neutik NL4 connectors
• Integrated overload protection • Available in black and white
• DH2005 true compression driver 1.25" voice coil)
• Rotatable 90 x 50 HF horn
• Integrated monitor angle
ZX1i Composite indoor/outdoor 8" two-way

• 8" weatherized cone high output LF transducer • wide range of motion included
• 1" true compression driver • 4-pin detachable Phoenix-style connector
• 100 x 100 and 90 x 50 coverage pattern • Dedicated transformer models with
• Weatherized for indoor and outdoor use wide range of selectable tabs
• "Clickn' Mount"Quick SAM mounting system for
ZXA1-90 Compact Powered Loudspeaker

• Integrated 800 watt power amplifier • Selectable high-pass filter for use with subwoofers
• Biamplified design with transducer protection • Line and microphone inputs
• EV8L 8"high-output LF transducer • Integral monitor angle on enclosure
• DH2"05 1exit true compression driver • Built-in pole mount
• 90° x 50° coverage pattern • Lightweight (< 20 lbs) with integral
• Rotatable horn design handle for easy carrying
• 123 dB maximum SPL
31
Zx/ZxA Series Live for Sound
Speakers
Install
ZX3 Composite 12" two-way ZX4 Composite 15" two-way

• ND2 2" voice coil, 1" exit
neodymium compression driver
• 15" 2-Way with EVS15SF LF transducer
Mobile Audio
• 600 W cont. 2400 peak

• 90° x 50° and 60° x 60° horn patterns • DH3 1.25" titanium HF driver
• Seven M8 rigging points, • 400 Watt cont. 1600W Peak
two single stud fittings • High sensitivity (100dB)
• NL4 or two conductor SJO cable and • Adjustable monitor angles 45° and 55°
gland nut (weatherized versions) • Large Format 90° x 50° EV horn
• Available in two finishes:
indoor or weatherized
• Black or white
ZX5 Composite 15" two-way

• DVX-3150 : New high-power 15" LF transducer • 3 Ancra single-stud fittings (5 attachment points)
• ND2 : New 2" voicecoil Neodymium • Integrated pole-mount adapter
compression driver • Powder-coated full-face steel grille backed with foam
• New asymmetrically molded polypropylene enclosure • Standard floor monitor angle 45°, adjustable
• Internal passive crossover (switchable to biamp) to 55° with integrated monitor feet
• 10 x metric inserts (M8)
ZXA5
• Integrated Amplifier with 1000W LF, 250W HF Compression Driver
• Selectable 100 Hz High Pass • Two Models: 60° x 60° or 90° x 50°
• XLR and 1/4" TRS Input Connector • Coverage Patterns
• XLR Output Connector • High Sensitivity, 133 dB Maximum SPL
• PowerCon Connector with Slave Through • Adjustable Monitor Angle (45° or 55°)
• DVX3150 15" LF Transducer with Forced Air Cooling • 3 Anchor Plates for Single Stud Fittings and
• ND2 2" Voice Coil, 1" Exit Neodymium • 10 Integral Suspension Points
32
Live for Sound Zx/ZxA Series
Speakers
Install
ZX1 ZX1i ZX3 ZX4 ZX5 ZXA1-90 ZXA5
Frequency Response (-3 dB) 60 - 20000 Hz 60 - 20000 Hz 58 - 15000 Hz 60 - 20000 Hz 58 - 18000 Hz 60 Hz - 20 kHz Hz Full 58 - 18000 Hz
Range Mode
Recommended High-Pass 40 Hz 40 Hz 50 Hz 42 Hz 36 Hz 36 Hz 100 Hz User Selectable

Frequency
Mobile Audio
Sensitivity 1 W/1 m 94 dB 94 dB 97 dB 100 dB 98 dB
Max. SPL/1m (calc) 123 dB 123 dB 131 dB 132 dB 132 dB 123 dB 133 dB
System Power Handling (Continu- 200 Watts 200 Watts 600 Watts 400 Watts 600 Watts
ous/Program/Peak)
Nominal Impedance (Passive) 8Ω 8Ω 8Ω 8Ω 8Ω – –
Speaker Type Fullrange, Mid-High, Fullrange, Mid-High, Fullrange Fullrange, Mid-High, Fullrange, Mid-High, Fullrange, Powered Monitors, Powered Speakers,
Two-Way, Wedges Two-Way Two-Way, Wedges Two-Way, Wedges Two-Way, Wedges
Input Connections Parallel Neutrik® NL4 4-pin Phoenix 2 conductor SJO cable XLR and TRS Combo; XLR
Speakon and gland nut XLR with Independent
Gain
Frequency Response (-10 dB) 48 - 20000 Hz 48 - 20000 Hz 48 - 20000 Hz 42 - 20000 Hz 39 - 20000 Hz 48 Hz - 20 kHz Hz Full 50 - 20000 Hz
Range Mode
Coverage(Nominal -6 dB) H° 90 ° 90 ° 90 ° 60 ° 90 ° 90°, 100° 90°
Coverage(Nominal -6 dB) V° 50 ° 50 ° 50 ° 60 ° 50 ° 50°, 100° 50°
LF Transducer EV8L EV8L DVX3121 EVS15SF DVX3150 EV8L, 203mm (8 in) DVX3150
Driver
HF Transducer DH2005 DH2005 ND2 DH3 ND2 DH2005, 25mm (1 in) ND2
Exit Compression Driver
Crossover Frequency 1.7 kHz 1.7 kHz 2 kHz 1500 Hz 1500 Hz 1800 Hz 1500 Hz
Minimum Impedance 6Ω 6Ω 6.2 Ω 6.5 Ω 6.5 Ω
Enclosure Material High Impact Polystyrene
Grill Polyester Powder Coated, 18GA Galvanized Steel
Internal Crossover Yes Yes Yes No, Yes
Chassis Size 8 in (203.2 mm) 8 in (203.2 mm) 12 in (304.8 mm) 15 in (381 mm) 15 in (381 mm) 8 in (203.2 mm) 15 in (381 mm)
Flying No Yes Yes Yes Yes No Yes
Outdoor No Yes Yes No Yes No No
Color Black Black, White Black, White Black Black, White Black Black, White
Rotatable Horn Yes Yes no
Power Handling 200 W/400 W/800 W 200 W/400 W/800 W 600 W / 2400 W 400 W / 1600 W 600 W / 2400 W
(Continuous/Program/Peak)
Amplifier Power (RMS) 800 W 1250 W
Power Requirement 120V: 95V - 132V, 50 - 60 Hz, 0.6A; 230V:190V -

264V, 50 - 60 Hz, 0.4A
Height 17.76 in (451 mm) 17.76 in (451 mm) 27.01 in (686 mm) 27.24 in (692 mm) 17.99 in (457 mm) 27.24 in (692 mm)
Width 11.1 in (282 mm) 11.1 in (282 mm) 17.52 in (445 mm) 17.56 in (446 mm) 11.1 in (282 mm) 17.56 in (446 mm)
Depth 10.35 in (263 mm) 10.35 in (263 mm) 15.98 in (406 mm) 16.18 in (411 mm) 10.39 in (264 mm) 16.18 in (411 mm)
Weight Net 18.52 lbs (8.4 kg) 18.52 lbs (8.4 kg) 43.65 lbs (19.8 kg) 44.53 lbs (20.2 kg) 22.11.02 lbs (5 kg) 19 lbs (8.62 kg) 50.49 lbs (22.9 kg)
33
Sx/SxA Series Live for Sound
Speakers
As a manufacturer of tour proven loudspeakers and offers the convenience of powered loudspeakers with the
amplifiers, it only makes sense to pair the two together performance and reliability for which EV is known.
within the most popular loudspeaker design in history. SXA
Install
Sx80BE Sx80TB
• 2-Way Full-range
• 2-Way Full-range
• Vented LF enclosure
Mobile Audio
• 1" voicecoil (titanium diaphragm)
• 1" voicecoil (titanium diaphragm)
• PRO™ Driver protection
• PRO™ Driver protection
• HF-horn features Varipath™
• Trapezoidal
• Trapezoidal
• Compact dimensions
• Compact dimensions
• 7 x M6 and 4 x M5 inserts
• 7 x M6 and 4 x M5 inserts
Sx 80 Sx 100 + Sx 250 SxA100+ SxA250
Frequency Range (-10 dB) 51 Hz - 20 kHz 60 Hz - 25 kHz 50 Hz - 20 kHz Frequency Response (-10dB) 55Hz to 20kHz 55Hz to 20kHz
Recommended High-Pass --- --- 45 Hz (12 dB/Oct.) Rated Output Power

Frequency
long term LF150/HF 50Watts LF150/HF 50Watts
Axial Sensitivity SPL 92 dB 98 dB 99 dB
1W/1m (Biamp mode) 10ms burst LF350W/HF 80W LF350W/HF 80W
Max. SPL / 1m (calc.); 121 dB 127 dB 130 dB Max. Sound Pressure Level 124 dB 126 dB
full space (100V: 110 dB)
HF Coverage (nominal) 65° x 65° 80° x 55°
Long-Term Power Handling 175 W 200 W 350 W
(low Z) Components 12“ woofer DL15BFH
LF
(100V resp. Biamp) (60 W/100V)
HF DH 2010A DH 2010A
Short-Term Power Handling 700 W 800 W 1,400 W
(Peak), low Z Inputs Microphone Input (XLR) Microphone Input (XLR)
Line Level Input (XLR/1/4“) Line Level Input (XLR/1/4“)
Coverage (nominal -6 dB) 90° x 60° 65° x 65° 80° x 55° XLR out (slave) XLR out (slave)
H° x V° (CD Horn) (CD Horn)
Level Controls Mic Level (-35 dBu to 0 dBu Mic Level (-35dBu to 0dBu
Directivity Index 9.2 dB 11.1 dB 11.6 dB Master Level (- infinity to Master Level (- infinity
(800 - 16.000 Hz) (+2.3/-3.9 dB) (+2.4/-4.1 dB) (+3.0/-6.9 dB) 0 dB) to 0dB)
LF woofer (transducer) 8” (---) 12” (---) 15”(DL15BFH) 2-Band EQ LF: +/- 6dB LF: +/- 6dB
HF: +/- 4dB HF: +/- 4dB
HF throat diameter 1” (DH2005) 1” (DH3) 1”(DH2010A)
(transducer) Power Requirement 120V or 220-240V 50/60Hz 120V or 220-240V 50/60Hz
Crossover Frequencies 2,200 Hz 1,500 Hz 1,600 Hz Dimensions 586 x 429 x 312 mm 625 x 437 x 333 mm
Nominal Impedance (non- 8Ω 8Ω 8Ω (heights x width x depth) 23.07” x 16.89” x 12.28” 24.60” x 17.20” x 13.11”
transformer)
Weight (net) 19.5 kg (43 lbs.) 22.2 kg (48.94 lbs.)
Minimum Impedance (non- 7.2 Ω 5.6 Ω 5.2 Ω
transformer)
Input Connections see above see above 2 four-pin Speakon
Dimensions (H x W at 400 x 292 x 222 mm 586 x 429 x 312 mm 625 x 431 x 330 mm
front x D) 15.75” x 11.5” x 8.75” 23.07” x 16.89” x 12.28” 24.6” x 16.97” x 12.99”
Net Weight 8.2 kg (T/PIX: 9.3 kg) 14.5 kg 18.1 kg

18.1 lbs. (T/PIX: 20.5 lbs.) 32 lbs 39.9 lbs.
34
Live for Sound Sx/SxA Series
Speakers
Sx80PI Sx80PIX
• 2-Way Full-range • 2-Way Full-range
• Vented LF enclosure • Vented LF enclosure
• 1" voicecoil (titanium diaphragm) • 1" voicecoil (titanium diaphragm)
• PRO™ Driver protection • PRO™ Driver protection
• HF-horn features Varipath™ • HF-horn features Varipath™
• Trapezoidal • Trapezoidal
• Compact dimensions • Compact dimensions
• 7 x M6 and 4 x M5 inserts • 7 x M6 and 4 x M5 inserts
Sx100+ Composite 12" two-way

• 2-Way Full-range • Trapezoidal (25° per side)
Install
• Vented LF enclosure • Physical characteristics of
• 1.25" voice coil (titanium diaphragm) • Sx 300 with slightly lower sensitivity
• PRO™ Driver protection circuit • 4 x M8x1.25 attachment inserts
Mobile Audio
SxA100+ Powered composite 12" two-way
• Very compact, lightweight, robust • 65° x 65° CD horn from the famous Sx 300
polypropylene enclosure for an outstanding acoustic performance
• Real fullrange 55 Hz – 20k Hz for front-of house • Fully compatible with Sx mounting
or monitor (with F200 monitor adapter) hardware and accessories
• Biamped with 350 W plus 80 W peak power • Pole-mount adapter
for a very dynamic musical response
• Mixable microphone and line inputs with a 2-band EQ
Sx250 15" two-way

• 2-Way Full-range • Rugged FUTURATM finish
• Extended bass response • Five sided, multi-angle cabinet
• 15" DL-Woofer 1.25" titanium diaphragm • Built-in stand mount
• 80 x 55 degree horn pattern • Suspendable using optional SK-1 kit
• 18mm plywood enclosure
SxA250 Powered 15" two-way

• 7-ply plywood enclosure with EV Coat • Mixable microphone and line inputs and a 2-band EQ
cover; extremely scratch resistant • EV DL15 woofer with cast aluminium frame
• 5-side enclosure with 45° monitor angle • DH2010A 1.25" driver with 80° x 55° CD horn
• True fullrange (55Hz – 20kHz) for front- • Pole-mount adapter
of-house or monitor applications
• Biamped at 350W plus 80W peak power
for a very dynamic musical response
35
Sx/SxA Series Live for Sound
Speakers
Install
Sx300E Composite 12" two-way

Mobile Audio

• High Sensitivity • 4 x M8x1.25 attachment inserts
• Ultra-linear frequency response • Overview of variants see right spread sheet
• Vented LF enclosure • Sx300 PI outdoor version
• 1.25" voice coil (titanium diaphragm) • Sx300 PIX for 70V/100V
• PRO™ Driver protection circuit
Sx300PI Composite weatherized 12" two-way

Sx300PIX Composite weatherized 70/100v 12" two-way

36
Live for Sound Sx/SxA Series
Speakers
Sx600PI High output composite dual 12" two-way
• Two-element vertical line array • SuperSAM mounting, 60° x 180° adjustable
• For highest output outdoors • Waterproof connection
• Very high sensitivity (105 dB/1W/1m) • by SJO cable with gland nut
• High intelligibility • Internal 600 W transformer available (SX600PIX)
• Two 12" woofers
• DH2T driver on 65° x 65°Varipath horn
• All-weather cabinet
Sb122
Install
Composite 12" subwoofer
• Subwoofer
• Direct radiating vented design
• Trapezoidal (25° per side)
• Lo-Pass Filter
Mobile Audio
• 4 x M8x1.25 attachment points
• Sb122PI outdoor version
• Sb122PIX fro 70V/100V
Sx 300 Sx600PI Sb 122
Frequency Range (-10 dB) 50 Hz - 20 kHz 70 Hz - 16 kHz 43 - 200 Hz
Recommended High-Pass Frequency --- 90 Hz 40 Hz (12 dB/Oct.)
Axial Sensitivity SPL 1W/1m (Biamp mode) 99 dB 105 dB 99 dB*
Max. SPL / 1m (calc.); full space 131 dB (100V: 123 dB) 139 dB 131 dB*
Long-Term Power Handling (low Z) 300 W 600 W 400 W
(100V resp. Biamp) (200 W/100V)
Short-Term Power Handling (Peak), low Z 1,200 W 2,400 W 1,600 W
Coverage (nominal -6 dB) H° x V° 65° x 65° (CD Horn) 65° x 65° essentially omni
Directivity Index (800 - 16.000 Hz) 11.1 dB (+2.4/-4.1 dB) 11.3 dB ---
LF woofer (transducer) 12” (DL12BFH) 2 x 12” (ND12,DL12BFH) 12” (EVS12)
HF throat diameter (transducer) 1” (DH2010A) 1”(DH2T)
Crossover Frequencies 1,500 Hz 1,800 Hz 160 Hz
Nominal Impedance (non-transformer) 8Ω 4Ω 8Ω
Minimum Impedance (non-transformer) 5.0 Ω 3.5 Ω 6.0 Ω
Input Connections 2 four-pin Speakon SJO cable/gland nut 2 four-pin Speakon
Dimensions (H x W at front x D) 586 x 429 x 312 mm 23.07” x 16.89” x 12.28” 1163 x 429 x 312 mm 45.79” x 16.89” x 12.28” 586 x 429 x 312 mm 23.07” x 16.89” x 12.28”
Net Weight 14.5 kg (PIX: 17.7 kg) 30 lbs. (PIX: 49.0 lbs.) 36.3 kg 80 lbs. 14.6 kg 33 lbs.
37
Phoenix Live for Sound
Speakers
Phoenix represents the rebirth of Manifold Technology. to reproduce rock, pop, and dance music. Using dual,
Designed for tremendous SPL and sonic headroom, as ND2, neodymium compression drivers on a manifold horn
well as ease of transport and set-up, Phoenix fills the and state-of-the-art DVX woofers, Phoenix loudspeakers
needs of the live sound PA professional who finds that can perform louder and longer with less stress on system
X-Array is just too much and QRx is not enough. The components.
Install
high-output performance of Phoenix has been optimized
PX2122
Mobile Audio
High output dual 12" two-way

• Dual ND2 2" Voice Coil, 1" Exit • Biamp Operation
Neodymium Compression Drivers • Very High Sensitivity, 138 dB max. SPL
• Dual DVX3121 12LF Transducers • Integral Rigging Points for Eyebolts
with Forced Air Cooling or Optional Rigging Kit
• Long-Throw 45° x 30° Rotatable Coverage Pattern • Designed for horizontal arrays
• 1000W Continuous (4000W of two or three cabinets
Peak) Power Handling
PX2152 High output dual 15" two-way

• Dual ND2 2" Voice Coil, 1" Exit • 1200W Continuous (4800W
Neodymium Compression Drivers Peak) Power Handling
• Dual DVX3150 15LF Transducers • Passive/Biamp Selectable
with Forced Air Cooling • Integral Points for eyebolts or optional Rigging Kit
• High Sensitivity, 136 dB maximum SPL • Arrayable
• 60° x 45° Rotatable Coverage Pattern
PX2181 High output dual 18" subwoofer

• Dual Horn-Loaded DVX3180 18" LF • Integral Mounting Points on Rear Panel
Transducers with Forced Air Cooling for Optional Wheel/Caster Kit
• 1000W Continuous (4000W • Enclosure is Stackable in Both
Peak) Power Handling Horizontal and Vertical Orientations
• High-Efficiency Sub-ScoopTM Design
• Dual/Parallel Mode Selectable
• Very High Sensitivity, 141 dB max. SPL
38
Live for Sound Phoenix
Speakers
PX1122M High output 12" two-way monitor
• Dual ND2 2" Voice Coil, 1" Exit • 90° x 45° Coverage Pattern
Neodymium Compression Drivers • 600W Cont. (2400W Peak) Power Handling
• VX3121 12LF Transducer with Forced Air Cooling • Passive/Biamp Selectable
• Very High Sensitivity, 132 dB(PX1122M) • Integral Rigging Point for PX-
/ 134 dB(PX1152M) max. SPL SAM Strong Arm & Pole
• Ultra-Compact, Low Profile, Multipurpose Design • Mount for Tripod Use
PX1152M High output 15" two-way monitor
Install
• Dual ND2 2" Voice Coil, 1" Exit • 90° x 45° Coverage Pattern
Neodymium Compression Drivers • 600W Cont. (2400W Peak) Power Handling
• VX3151 15LF Transducer with Forced Air Cooling • Passive/Biamp Selectable
• Very High Sensitivity, 132 dB(PX1122M) • Integral Rigging Point for PX-
/ 134 dB(PX1152M) max. SPL SAM Strong Arm & Pole
Mobile Audio
• Ultra-Compact, Low Profile, Multipurpose Design • Mount for Tripod Use
PX2122 PX2152 PX2181 PX1122M PX1152M

Frequency Range (-10 dB) 60 Hz - 19 kHz 50 Hz - 19 kHz 40 Hz - 180 Hz 55 Hz - 19 kHz 50 Hz - 19 kHz
Recommended High-Pass 80 Hz (12 dB/Oct.) 40 Hz (12 dB/Oct.) 32 Hz (12 dB/Oct.) 50 Hz (12 dB/Oct.) 45 Hz (12 dB/Oct.)
Frequency
Axial Sensitivity SPL 1 W/1 m 102 dB 99 dB 105 dB 98 dB 100 dB
Max. SPL /1 m (calc.); full space 138 dB 136 dB 141 dB 132 dB 134 dB
LF Power Handling (Passive) –— 1200 W Cont. / 4,800 W Peak –— 600 W Cont. / 2,400 W Peak 600 W Cont. / 2,400 W Peak
LF Power Handling (Biamp) 1000 W Cont. / 4,000 W Peak 1000 W Cont. / 4,000 W Peak 1000 W Cont. / 4,000 W Peak 500 W Cont. / 2,000 W Peak Peak 500 W Cont. / 2,000 W Peak
HF Power Handling (Biamp) 80 W Cont. / 320 W Peak 80 W Cont. / 320 W Peak –— 80 W Cont. / 320 W Peak 80 W Cont. / 320 W Peak
Coverage (nominal -6 dB) H° x V° 30° (or 45°) x 45° (or 30°) 60° (or 45°) x 45° (or 60°) Omnidirectional 90° x 45° 90° x 45°
LF transducer 2 x 12” DVX3121 2 x 15” DVX3150 2 x 18” DVX3180 1 x 12” DVX3121 1 x 12” DVX3151
HF transducer 2 x 2” ND2-16 2 x 2” ND2-16 –— 2 x 2” ND2-16 2 x 2” ND2-16
Crossover Frequencies 1600 Hz 1,900 Hz 80 Hz - 125 Hz 80 Hz - 125 Hz 1,600 Hz 80 Hz - 125 Hz
LF Impedance 4 Ω Nominal 4 Ω Nominal 4 Ω Nominal 8 Ω Nominal 8 Ω Nominal
HF Impedance 8 Ω Nominal 8 Ω Nominal –— 8 Ω Nominal 8 Ω Nominal
Input Connections Neutrik Speakon NL4’s Neutrik Speakon NL4’s Neutrik Speakon NL4’s Neutrik Speakon NL4’s Neutrik Speakon NL4’s
Enclosure Material 18 mm Plywood with EVCoat™ 18 mm Plywood with EVCoat™ 18 mm Plywood with EVCoat™ 18 mm Plywood with EVCoat™ 18 mm Plywood with EVCoat
Dimensions (H x W x D) 1219 x 457 x 445 mm 1219 x 457 x 445 mm 1219 x 569 x 758 mm 546 x 366 x 305 mm 610 x 366 x 305 mm
(48” x 18” x 17,5”) 48” x 18” x 17,5” 48.0” x 22.42” x 29.85” 24.00” x 17.42” x 12.97”
Net Weight 50.1 kg (110.3 lbs.) 45.6 kg (111.9 lbs.) 86.5 kg (190,5 lbs.) 23.1 kg (51 lbs.) 25.1 kg (55.3 lbs.)
39
QRx Series Live for Sound
Speakers
QRx Series has become the standard for regional sound coverage without having to tilt the enclosure toward the
companies, rental professionals, and contractors who want audience. Our powerhouse, the DH7 large-format driver
compact high-performance loudspeakers with concert- (three-inch voice-coil, 1.4-inch exit) provides the high-
Install
grade EV components. Covered with rugged EVCOAT, frequency engine, while a selection of DL and EVX woofers
QRx looks great stacked, on poles, as monitors, or flown anchor the low and sub frequencies. The combination of
with simple, integrated, L-track rigging points on top and high-level components, unique design, and versatility make
bottom. Their unique, asymmetrical, fully rotable horns QRx Series one of the best values in the industry.
with 15 degree downward bias ensures high-frequency
Mobile Audio
QRx 112/75 Compact 12" two-way
• 2-Way High-Output Full-range • 3" voice coil (titanium diaphragm)

• High Sensitivity • Protection circuits for HF-driver and LF-woofer
• Ultra-linear frequency response • Easy external operation mode selection
• Solid bass down to 52 Hz (-10 dB) • 5-side multi-angled housing with monitor slant
• Asymmetric CD-horn aimed downward by 10°
QRx 115/75 Compact 15" two-way

• 2-Way High-Output Full-range • 3" voice coil (titanium diaphragm)
• High Sensitivity • Protection circuits for HF-driver and LF-woofer
• Ultra-linear frequency response • Easy external operation mode selection
• Solid bass down to 50 Hz (-10 dB) • 5-side multi-angled housing with monitor slant
• Vented LF enclosure • Same front width as Rx 118 S
• Asymmetric CD-horn aimed downward by 10°
QRx 118S Compact 18" subwoofer

• Subwoofer • Solid bass down to 30 Hz (-10 dB)
• Direct radiating vented design • Rectangular
• High Sensitivity • Equipped with shown features below
40
Live for Sound QRx Series
Speakers
QRx 153/75 Compact 15" three-way
• Three-way, high-output, full-range loudspeaker • Protection circuit for HF driver
• Biamp only • Trapezoidal cabinet (15° per side)
• Solid bass to 42 Hz (-10dB) for tightpack situations
• Vented LF enclosure • Comes with L-track hardware and
• Asymmetrical CD horn aimed downward by 10° single-stud ancra fittings
• 3" HF voice coil (titanium diaphragm)
QRx 212/75 Compact dual 12" two-way

• 2-Way Highest-Output Full-range • Asymmetric CD-horn aimed downward by 10°
Install
• High Sensitivity • 3" voice coil (titanium diaphragm)
• Ultra-linear frequency response • Protection circuits for HF-driver and LF-woofers
• Extended bass response down to 50 Hz (-10 dB) • Easy external operation mode selection
• Vented LF enclosure • Trapezoidal (10° per side)
Mobile Audio
QRx 218S Compact dual 18" subwoofer
• Subwoofer • Also perfect in combination with
• Direct radiating vented design large HP and MH horns
• High Sensitivity • Equipped with shown features below
• Solid bass down to 31 Hz (-10 dB) • Flyable version available
• Rectangular
QRx112/75 QRx115/75 QRx153 QRx(H) 212/75 QRx118 QRx218S

Frequency Range (-10 dB) 52 Hz - 18 kHz 45 Hz - 16 kHz 42 Hz - 20 kHz 52 Hz - 15 kHz 30 Hz - 250 Hz 31 - 250 Hz
Frequency Range (-3 dB) with controller amp 75 Hz - 15 kHz 60 Hz - 15 kHz 50 Hz - 16 kHz 75 Hz - 18 kHz 45 Hz - 150 Hz 38 - 125 Hz
Recommended High-pass frequency 45 Hz (12 dB/Oct.) 45 Hz (12 dB/Oct.) — 45 Hz (12 dB/Oct.) 36 Hz (12 dB/Oct.) 35 Hz (12 dB/Oct.)
Axial Sensitivity SPL 1W/1m 100 dB 100 dB 98/105 dB 102 dB 98 dB 102 dB

(Biamp operation) (100/112 dB) (98/110 dB) (102/112 dB)
Max. SPL / 1m (calc.) 131 dB 133 dB 130 dB 129 dB/135 dB 131/137 dB * 139 dB
Continuous Power Handling 350 W (300 W/75 W) 450 W (400 W/75 W) 400 W/150 W/150 W 650 W (600 W/75 W) 600/800 W 1200 W
Peak Power Handling (Biamp) 1,400 W (1,200/300 W) 1,800 W (1,600/300 1,600 W/600 W/600 W 2,600 W (2,400/300 W) 2,400/3,200 W 4,800 W
W)
Coverage (nominal -6 dB) H° x V° 75° x 50° 75° x 50° 75° x 50° 75° x 50° essentially essentially
(asym. CD horn) (asym. CD horn) (asym. CD horn) (asym. CD horn) omni omni
LF woofer (transducer) 12” (DL12BFH) 15” (DL15X) 15” (DL15ST) 2 x 12” (DL12BFH) 1x18”(EVX) / 2 x 18” (DL18MT)
2x15”(DL15)
VC diameter 3” (DH7) 3” (DH7) 8” MF8 MF/ 3” DH7 HF 3” (DH7) --- ---
Crossover Frequencies (slope in Biamp 1,500 Hz (24 dB/Oct.) 1,500 Hz (24 dB/Oct.) 1,200 Hz 1,500 Hz (24 dB/Oct.) 100 Hz (24 dB/Oct.) 100 Hz (24 dB/Oct.)
mode)
Nominal Impedance (Biamp mode) 8 Ω (8 Ω/8 Ω) 8 Ω (8 Ω/8 Ω) 8 Ω/12 Ω/12 Ω 4 Ω (4 Ω/8 Ω) 8/4 Ω 4Ω
Input Connections 2 Neutrik® NL4 2 Neutrik® NL4 2 Neutrik® NL4 2 Neutrik® NL4 2 Neutrik® NL4 2 Neutrik® NL4
Dimensions (H x W at front x D) 675 x 390 x 372 mm 759 x 450 x 407 mm 1,240 x 467 x 485 mm 990 x 390 x 375 mm 902 x 450 x 600 mm 1015 x 560 x 602 mm
26.6” x 15.36” x 16” 29.9” x 17.72” x 16.02” 41.5” x 18.4” x 19.12” 38.98” x 15.47” x 14.77” 35.5” x 17.7” x 23.6” 39” x 22.05” x 23.6”
Net Weight (subs without wheel kit) 26.0 kg (58 lbs.) 32.0 kg. (71 lbs.) 47 kg (97 lbs.) 36.5 kg. (80 lbs.) 47.5/48.5 kg (100/102 68 kg (150 lbs.)
lbs.)
*Half space
41
Tour X Live for Sound
Speakers
Tour X embodies the same engineering excellence and multi-application purpose and breakthrough performance.
aesthetic design found in every world-class EV tour A host of innovative features and patent-pending designs
system. Its form is seamlessly integrated into practical, make Tour X the most exciting portable loudspeaker series
Install
functional elements that make a bold statement about the available.
TX1122 12" two-way
• DH3 1.25" (32 mm) Diaphragm, 1" (25 mm)- • 90° x 50° coverage pattern
Mobile Audio
exit pure titanium compression driver • 97 dB sensitivity, 130 dB maximum SPL

• SMX2120 12(305 mm) LF transducer • 500 W continuous, 2000 W peak power handling
with fully symmetric drive • Pole mount for tripod use
• Advanced fourth-order crossover with HF protection • Six 3/8" threaded points for suspension
TX1152 15" two-way
• DH3 1.25" (32 mm) Diaphragm, 1" (25 mm)- • 60° x 40° rotatable coverage pattern
exit pure titanium compression driver • 100 dB sensitivity, 133 dB maximum SPL
• SMX2151 15" (381 mm) LF transducer • 500 W continuous, 2000 W peak power handling
with fully symmetric drive • Pole mount for tripod use
• Advanced fourth-order crossover with HF protection • Six 3/8" threaded points for suspension
TX2152 Dual 15" Two-way Full-range
• ND2-8 2" (51 mm) diaphragm, 1" (25.4 mm)- • 60° x 40° rotatable coverage pattern
exit neodymium compression driver • 103 dB sensitivity, 139 dB maximum SPL
• Dual SMX2151 15" (381 mm) LF • 1000 W continuous, 4000 W peak power handling
transducers with fully symmetric drive • Six 3/8" threaded points for suspension
• Advanced sixth-order crossover with HF protection
42
Live for Sound Tour X
TX1181 18" subwoofer TX2181 Dual 18" subwoofer
Speakers
• EVS-18S 18" (457 mm) • Dual EVS-18S 18" (457 mm)
LF transducer LF transducers
• 100 dB sensitivity, 132 • 103 dB sensitivity,
dB maximum SPL 138 dB maximum SPL
• Integrated low pass filter • 1000 W continuous, 4000 W
with 6 dB / octave slope peak power handling
• 500 W continuous, 2000 • Four integrated handles
W peak power handling for easy portability
• Pole mount to elevate a • Mounting points to attach
two-way loudspeaker optional TX-W1 wheel kit
• Mounting points to attach
optional TX-W1 wheel kit
TX1122FM 12" two-way dedicated floor monitor
• 55° compact vertical floor monitor with with fully symmetric drive
Install
Signal Synchronized Transducers™ • Integrated crossover with steep 24 dB
• 99 dB sensitivity, 132 dB maximum SPL / octave slopes and HF protection
• DH3 1.25" (32 mm) diaphragm, 1" (25 mm)- • 90° x 50° coverage pattern
exit pure titanium compression driver • 500 W continuous, 2000 W peak power handling
• SMX2121 12" (305 mm) LF transducer
Mobile Audio
TX1152FM 15" two-way dedicated floor monitor
• 55° vertical floor monitor with Signal • Integrated crossover with steep 24 dB
Synchronized Transducers™ / octave slopes and HF protection
• 100 dB sensitivity, 133 dB maximum SPL • 90° x 50° coverage pattern
• DH3 1.25" (32 mm) diaphragm, 1"(25 mm)- • 500 W continuous, 2000 W peak power handling
exit pure titanium compression driver
• SMX2151 15" (381 mm) LF transducer
with fully symmetric drive
TX1122 TX1152 TX2152 TX1181 TX2181 TX1122FM TX1152FM

Frequency Response (-3 dB) 60 - 20000 Hz 55 - 20000 Hz 55 - 13000 Hz 50 - 160 Hz 50 - 160 Hz 70 - 20000 Hz 65 - 20000 Hz
Sensitivity 1 W/1 m 97 dB 100 dB 103 dB 100 dB 103 dB 99 dB 100 dB
System Power Handling (Con- 500 Watts/2000 peak 500 Watts/2000 peak 1000 Watts/4000 peak 500 Watts2000 peak 1000 Watts4000 peak 500 Watts2000 peak 500 Watts/2000 peak
tinuous/Program/Peak)
Nominal Impedance (Passive) 8Ω 8Ω 4Ω 8Ω 4Ω 8Ω 8Ω
Speaker Type Fullrange Fullrange Fullrange Subs Subs Fullrange Fullrange
Input Connections Parallel Neutrik® NL4 Parallel Neutrik® NL4 Parallel Neutrik® NL4 Parallel Neutrik® NL4 Parallel Neutrik® NL4 Parallel Neutrik® NL4 Parallel Neutrik® NL4
Coverage(Nominal -6 dB) H° 90 ° 60 ° 60 ° 90 ° 90 °
Coverage(Nominal -6 dB) V° 50 ° 40 ° 40 ° 50 ° 50 °
LF Transducer SMX2120 SMX2151 (2) SMX2151 EVS18S (2) EVS18S SMX2121 SMX2151
HF Transducer DH3 DH3 ND2 DH3 DH3
Crossover Frequency 1750 Hz 1650 Hz 1750 Hz 1600 Hz 1750 Hz
Minimum Impedance 5.4 Ω 5.6 Ω 3.1 Ω 7.5 Ω 2.9 Ω 6.4 Ω 6.2 Ω
Enclosure Material Plywood and MDF with Plywood and MDF with Plywood and MDF with Plywood and MDF with Plywood and MDF with Plywood and MDF with Plywood and MDF with
EVCOAT EVCOAT EVCOAT EVCOAT EVCOAT EVCOAT EVCOAT
Suspension (6) 3/8-inch threaded (6) 3/8-inch threaded (6) 3/8-inch threaded
inserts inserts inserts
Internal Crossover Yes Yes Yes Yes No Yes Yes
Flying Yes Yes Yes No No No No
Rotatable Horn No Yes Yes No No
Height 24.25 in (616 mm) 30.55 in (776 mm) 45.43 in (1154 mm) 30.28 in (769 mm) 45.43 in (1154 mm) 17.32 in (440 mm) 18.7 in (475 mm)
Width 15.04 in (382 mm) 17.56 in (446 mm) 20 in (508 mm) 17.28 in (439 mm) 20 in (508 mm) 14.33 in (364 mm) 17.28 in (439 mm)
Depth 14.96 in (380 mm) 17.56 in (446 mm) 18.54 in (471 mm) 23.27 in (591 mm) 27.2 in (691 mm) 22.56 in (573 mm) 25.79 in (655 mm)
Weight Net 44.53 lbs (20.2 kg) 61.29 lbs (27.8 kg) 94.36 lbs (42.8 kg) 74.52 lbs (33.8 kg) 123.68 lbs (56.1 kg) 43.65 lbs (19.8 kg) 23.11.02 lbs (5 kg)
43
Live X Loudspeaker Series Live for Sound
Speakers
Clear, powerful and musical Electro-Voice loudspeakers EV-engineered components in solid wood cabinets.
command the stage at high-profile venues and major Wherever performance matters, Live X is serious gear for
events worldwide. Born stage-ready, the Live X series serious sound.
includes powered and passive models that all feature
ELX112 12" two-way ELX112P 12" two-way powered

• 12” woofer and 1.5” high-frequency
Mobile Audio
titanium compression driver

• 55 Hz – 20 kHz frequency range 94 dB
• 50 Hz – 20 kHz frequency range;
SPL sensitivity; 132 dB max SPL
132 dB max SPL
• 250 W continuous and 1000 W
• 1000 W Class D lightweight amplifier
peak power handling
— runs cool without fans
• Rugged wood cabinet — pole-mounts
• Easy to connect and control with
or stacks with Live X Subwoofers
versatile input and output options
• Rugged wood cabinet — pole mounts
ELX115 15" two-way ELX115P 15" two-way powered

• 50 Hz – 20 kHz frequency range 95 dB
• 44 Hz – 20 kHz frequency range; 134 dB max SPL
SPL sensitivity; 134 dB max SPL
• 1000 W Class D lightweight amplifier
• 400 W continuous and 1600
— runs cool without fans
W peak power handling
• Easy to connect and control with
• Rugged wood cabinet — pole-mounts
versatile input and output options
• Rugged wood cabinet — pole mounts
ELX118 18" subwoofer ELX118P 18" subwoofer powered

• 18” woofer provides extended • 18” woofer provides extended
low-frequency output low-frequency output
• 32 Hz – 200 kHz frequency range 96 • 32 Hz – 200 kHz frequency range 96
dB SPL sensitivity; 134 dB max SPL dB SPL sensitivity; 134 dB max SPL
• 400 W continuous and 1600 • 400 W continuous and 1600
W peak power handling W peak power handling
• Rugged wood cabinet—supports pole- • Rugged wood cabinet—supports pole-
mounted or stacked Live Loudspeakers mounted or stacked Live Loudspeakers
44
Live for Sound Live X Loudspeaker Series
Speakers
Mobile Audio
ELX215 Dual 15" Two-way
• Dual 15” woofers and a 1.5” high-
frequency titanium compression driver
• 38 Hz – 20 kHz frequency range
• 96 dB SPL sensitivity; 137 dB max SPL
• 600 W continuous and 2400 W peak power handling
• Rugged wood cabinet creates serious stage presence
ELX112 ELX112P ELX115 ELX115P ELX118 ELX118P ELX215

Sensitivity 1 W/1 m 99 dB 99 dB 100 dB 100 dB 100 dB 100 dB
System Power Handling 250 Watts 250 Watts 250 Watts 250 Watts 350 Watts 350 Watts 600 Watts
(Continuous/Program/Peak)
Nominal Impedance (Passive) 8Ω 8Ω 8Ω 8Ω 8Ω 8Ω 4Ω
Speaker Type Fullrange, Two-Way, Fullrange, Two-Way, Fullrange, Mid-High, Fullrange, Mid-High, Subs Subs Fullrange, Mid-High,
Wedges Wedges Two-Way Two-Way Two-Way
Input Connections Parallel Neutrik® NL4 Parallel Neutrik® NL4 Parallel Neutrik® NL4 Parallel Neutrik® NL4 Parallel Neutrik® NL4 Parallel Neutrik® NL4 Parallel Neutrik® NL4
Frequency Response (-10 dB) 40 - 20000 Hz 40 - 20000 Hz 35 - 20000 Hz
Coverage(Nominal -6 dB) H° 55 ° 55 ° 80 ° 80 ° omni omni 80 °
Coverage(Nominal -6 dB) V° 80 ° 80 ° 55 ° 55 ° omni omni 50 °
Internal Crossover Yes Yes Yes Yes Yes Yes Yes
Chassis Size 12 in (304.8 mm) 12 in (304.8 mm) 15 in (381 mm) 15 in (381 mm) 18 in (457.2 mm) 18 in (457.2 mm) 15 in (381 mm)
Flying No No No No No No No
Outdoor No No No No No No No
Color Black Black Black Black Black Black Black
Height 21.5 in (546 mm) 21.5 in (546 mm) 25.51 in (648 mm) 25.51 in (648 mm) 25.51 in (648 mm) 25.51 in (648 mm) 45.98 in (1168 mm)
Width 14.21 in (361 mm) 14.21 in (361 mm) 18.31 in (465 mm) 18.31 in (465 mm) 20.39 in (518 mm) 20.39 in (518 mm) 17.91 in (455 mm)
Depth 9.69 in (246 mm) 9.69 in (246 mm) 15.2 in (386 mm) 15.2 in (386 mm) 23.5 in (597 mm) 23.5 in (597 mm) 20.24 in (514 mm)
Weight Net 28.44 lbs (12.9 kg) 28.44 lbs (12.9 kg) 53.13 lbs (24.1 kg) 53.13 lbs (24.1 kg) 87.74 lbs (39.8 kg) 87.74 lbs (39.8 kg) 114.64 lbs (52 kg)
45
Variplex II Systems Live for Sound
Speakers
The Variplex II is one example of the many THX-approved designed to fit any room, and more importantly, that the
Electro-Voice systems. They join the large, diverse family cinema experience will be the best your customers have
of EV cinema products developed for both large and small ever heard. And take note: The THX-approved, high-
Install
cinemas. EV's wide range of products and time-proven quality, CPS Series amplifiers are part of this formula for
acoustic excellence ensures that any system can be success.
Variplex II
• Three-way stage system • Variplex™ B model features passive MB/

• Vari-Intense® technology provides HF crossover for biamping
• uniform front-to-back coverage • THX® approved
• Ring-Mode Decoupling™ improves • Digital Dynamics Capable™
vocal clarity and intelligibility
Variplex XL
• Three-way, high-output stage system • Ring-Mode Decoupling™ improves

• High-output MB and HF drivers vocal clarity and intelligibility
• Vari-Intense® technology provides • THX® approved
uniform front-to-back coverage • Digital Dynamics Capable™
Variplex Matinee Three-Way Screen Channel Speaker
• Three-way design for intelligibility and clarity • Digital Dynamic Capable™, wide dynamic range
• Asymmetric Directed Coverage™ technology • Compact and fully assembled
for even coverage from simple installation • Passive or bi-amp operation
• Very uniform frequency response
46
Live for Sound TL Series
Speakers
TL Series low-frequency systems offer a variety of low- reproduction of pipe organs, and some special effects
frequency solution for general fixed installation or low- in contemporary music, such as synthesizers and down-
frequency supplementation in existing installations. Low- tuned bass guitars. The TL 880D is specially suited for this
Install
frequency systems have f3s as low as 40 Hz. Response special type of application.
below 30 Hz is generally required for theatrical effects,
TL880D
• Very-low-frequency subwoofer • 20 Hz (-10 dB) allows real low end effects

• Direct radiating vented design • THX® approved
• High acoustic output to below
Variplex II XL Variplex II Variplex M TL880D
Frequency Range 34 Hz - 16 kHz 34 Hz - 16 kHz 45 Hz - 18 kHz 23 Hz - 1.8 kHz
Sensitivity, 1W/1m (LF/MF/HF) 104/109/112 dB 101/109/112 dB 104 dB 99 / 105 dB
Max.SPL/1m (calc.) (ave./peak) 130 / 136 dB 130 / 136 dB 127 / 133 dB 136 / 162 dB
Crossover Frequency 500Hz / 1300 Hz 500Hz / 1300 Hz 500 Hz
Long-term Power Handling (LF/MF/HF) 1600/400/75 W 800/400/75 W 500 / 300 W 1.200 W
Short-term Power Handling (LF/MF/HF) 6400/1600/300 W 3200/1600/300 W 2000 / 1200 W 4.800 W
Coverage Horizontal (long axis/short axis) 90° 90° 90° omnidirectional
Coverage Vertical (up/down) 20°/30° 20°/30° 20°/30°
HF driver ND 6-8 ND6-8 DH2T
MF driver 2 x EV8DH 2 x EV8DH 2 x EV8D
LF driver 4 x DL15ST 2 x DL15ST 2 x EV15G 2 x EVX180B
Nominal Impedance 2x4/4/8Ω 4/4/8Ω 4/4Ω 4Ω
Dimensions (Height/Width/Depth) 1924 x 1296 x 396 mm 1924 x 648 x 396 mm 1924 x 648 x 396 mm 1210 / 762 / 605
75.8” x 51” x 15.6” 75.8” x 25.5” x 15.6” 75.8” x 25.5” x 15.6” 47.5”x30”x23.8”
Weight (net) 139 kg (306.4 lbs.) 74 kg (163.1 lbs.) 72,6 kg (160.1 lbs.) 72,6kg (160 lbs)
47
SL Series Live for Sound
Speakers
Proven in thousands of installations and live applications digital loudspeaker controllers and processors, providing
around the world including the Olympics, the FIFA World 48-bit filter algorithms, 24-bit AD/DA conversion, and a
Cup, Live 8, and Live Earth, EV delivers truly state-of- dynamic range of 115 dB. The EV DC-One is a two-in, six-
Install
the-art DSP for today's applications. EV's flagship digital out digital signal processor for loudspeaker management
sound system processor, the Dx46, sets the standard for and optimization.
SL10-2V SL12-2V SL Series Cinema Speaker Systems

• High-output, two-way surround loudspeaker • SL10-2V model has 10" woofer
• Versatile suspension and safety options • SL10-2V includes wall mounting brackets
• 15° slanted cabinet • THX® compatible
• Exceptionally wide and smooth frequency response • Digital Dynamics Capable™
SL8.2
• Full-Bandwidth overload protection

• Strong-Arm-Mount™ for easy, flexible aiming
• Lightweight, unobtrusive plastic enclosure
• Easy-access input terminals
• 8-2way with 1,25” compression driver
SL12-2V SL10-2V SL8.2
Frequency Range 70Hz - 20 kHz 60Hz - 20kHz 60 - 20kHz
Sensitivity, 1W/1m 93 dB 93 dB
Max.SPL/1m (calc.) (ave./peak) 116 / 121 dB 113 / 119 dB 115/121 dB
Long-term Power Handling 200W 100 W 200 W
Short-term Power Handling 800 W 400 W 800 W
Coverage (H x V) 100° x 90° 100° x 100° 100° x 100°
LF driver 12” woofer 10” woofer EV8L
HF driver DH2010A 1” compression driver DH2005
Nominal Impedance 8Ω 8Ω 8Ω
Dimensions (Height/Width/Depth) in mm 535 x 476 x 335 476 x 318 x 275 451 x 282 x 263
21” x 18.7” x 13” 18.75” x 12.5” x 10.8” 17.75” x 11.12” x 10.35”
Weight (net) 21,4 kg (47 lbs.) 10,5 kg (23.1 lbs.) 8.4 kg (18.5 lbs)
48
Live for Sound Compression Drivers
Speakers
EV compression driver requirements call for ultra- systems and controls. Each EV compression driver's
precise tolerances, state-of-the-art modeling routines, parameters are tightly controlled to ensure world-class
and exceptional engineering expertise. Manufacturing performance, putting these drivers at the top of the class in
techniques are frequently pushed to process limits, and every respect.
materials are formed and stabilized with cutting-edge
DH2T-8/DH2T-16 2" Driver DH3/2010A 1.25" Driver

• One-inch exit screw-on, medium- • One-inch exit screw-on, small-
format compression driver format compression driver
• 160-watt power rating • 80-watt power rating
• 2" titanium diaphragm • 1.25" titanium diaphragm
• High performance on a wide variety • Excellent extended-bandwidth
of thread-on horn designs • HF driver for multi-way
loudspeaker systems
DH7-8/DH7-16 High-Value 3" Driver ND6-8/ND6-16 High-Value 3" Driver

• Large-format ceramic • Large-format neodymium
compression driver compression driver
• 300-watt power rating • 300 W power rating
• 3" titanium diaphragm • 3" titanium diaphragm 1.4"
• 1.4" or 2" exit diameter for use on or 2" exit diameter for use
almost any highperformance horn on almost any HP horn
• Excellent for use with directradiator • EV's highest-performance
or horn-loaded LF and MB sections compression driver gives
world-class performance
in any application
ND6x-8/ND6-16 High-Performance High-Value 3" 500 Hz Driver

• Large-format neodymium compression driver
• 300 W power rating
• 3" titanium diaphragm with 1.4" or 2" exit diameter for use on almost any HP horn
• EV's highest-performance compression driver gives world-class performance in any application
• ND6X from > 500 Hz
DH7-8/DH7-16 ND6-8/ND6-16 DH2T DH3/DH2010A
Frequency response 1,000 Hz–20 kHz 1,000 Hz–20 kHz / 500Hz-16kHz (ND6X) 1,200 Hz–20 kHz 1,500 Hz–20 kHz
Crossover frequency (minimum) 1,000 Hz 1,000 Hz 1,200 Hz 1,500 Hz
Midband sensitivity* 111 dB 112 dB 112 dB 111 dB
Long-term power rating (AES) 75 W 75 W 40 W 20 W
Short-term power rating 300 W 300 W 160 W 80 W
Impedance 8/16 Ω 8/16 Ω 8Ω 8Ω
Throat diameter 35 mm adapter (1.4”/2.0”) 35 mm adapter (1.4”/2.0”) 25 mm () 1.0” (25 mm)
Diaphragm diameter 76 mm (3.0”) 76 mm (3.0”) 50 mm (2.0”) 32 mm (1.25”)
Overall diameter 165 mm (6.5”) 132 mm (5.2”) 132 mm (5.2”) 107 mm (4.5”)
Overall depth 69 mm (2.7”) 69 mm (2.7”) 89 mm (3.5”) 89 mm (3.5”)
Net weight 4.54 kg (10.0 lbs) 2.5 kg (5.5 lbs) 2.27 kg (5.0 lbs) 1.5 kg (3.4 lbs)
*Average from 1,000 Hz–5 kHz on

HP6040 horn (DH3 average from 1,500
Hz–5 kHz on HPT64 horn)
49
Low Frequency Transducers Live for Sound
Speakers
EV component woofers are high-efficiency designs highly to resist collapse during explosive dynamic peaks and
refined from years of development and field experience. to provide internal mechanical damping to minimize
They employ extended-length voice coils for high-impact resonances that can change the character of the sound
reproduction of dynamic low-frequency program. All at high levels. DL and EVX woofers are made of cast
woofers feature proprietary heat-transfer systems for aluminium frames with push terminals, and all feature Ring-
unmatched power capacity and reliability. Kevlar®-fiber- Mode Decoupling™ (RMD™) except for the DL18MT and
composite cones are used to provide structural strength the EVX180B.
DL12BFH Chassis
• 12" woofer
• Cast Aluminium frame
• 300 watt Cont. 1200 watt peak
• 100 dB Sensitivity
• RMD
EVX155 Chassis
• 15" woofer
• 600 watt cont. 2400 watt peak
• 98 dB Sensitivity
• RMD
• Touring grade performance
• 4" Edge Wound Voice Coil
EVX180B Chassis
• 18" woofer
• 600 watt cont. 2400 watt peak
• 99 dB sensitivity
• Touring grade performance
• 4" Edge Wound Voice Coil
50
Live for Sound EVM Instrument Speakers
Speakers
Built to capture his tone, and withstand his abuse, the EVM12L Black Label is Zakk‘s only choice.
Meticulously voiced to duplicate the sound of the legendary EVM12L, the EVM12L Classic recaptures a tonality loved by
guitarists in virtually every genre.
EVM12L BlackLabel Zakk Wylde signature guitar speaker
Mobile Audio
• the OFFICIAL guitar loudspeaker of Zakk Wylde and Black Label Society
• improved power handling, improved magnet design, better venting
• 300W
• Frequency Response 80Hz - 7kHz
• Sensitivity 100dB
EVM12L Classic The Classic EVM12L guitar speaker

• 200W Power handling
• Frequency response: 80Hz – 7kHz (at -10 dB down)
• Heavy-duty cast frame reduces the low-frequency flex
inherent in stamped frame designs.
• Large 16lbs (7.3kg) magnet allows for higher efficiency,
better cooling and maximum output
• Manufactured in the USA
DL12BFH EVX155 EVX180B EVM12L Black Label EVM12L Classic
Cone diameter 12” (305 mm) 15” (381 mm) 18” (457 mm) 12” (305mm) 12” (305mm)
Coil diameter 2.5” (63.5 mm) 4” (101.6 mm) 4” (101.6 mm) 2.5” (63.5 mm) 2.5” (63.5 mm)
Impedance 8Ω 8Ω 8Ω 8 or 16 Ω 8 or 16 Ω
Frequency range 60–2,500 Hz 40–2,000 Hz 30–800 Hz 80Hz–7kHz 80Hz–7kHz
Long-term power rating (EIA) 300 W 600 W 600 W 300 W 200 W
Short-term power rating 1,200 W 2,400 W 2,400 W 1200 W 1000 W
Sensitivity (1 W @ 1 m) 96 dB 98 dB 98 dB 100 dB 100 dB
Maximum SPL 120.8 dB 125.8 dB 125.8 dB 125 dB 125 dB
Efficiency 3.69% 4.32% 3.4% 5.9% 5.9%
Frame front diameter 309.6 mm (12.19”) 385.0 mm (15.16”) 460.5 mm (18.13”) 309.6 mm (12.19”) 309.6 mm (12.19”)
Magnet diameter 155.6 mm (6.13”) 209.6 mm (8.25”) 8.25” (209.6 mm) 190.5 mm (7.5”) 190.5 mm (7.5”)
Overall depth 133.4 mm (5.25”) 184.2 mm (7.25”) 203.2 mm (8.00”) 133.4 mm (5.25”) 133.4 mm (5.25”)
Mounting bolt circle diameter 293.7 mm (11.563”) 369.9 mm (14.563”) 441.3 mm (17.375”) 293.7 mm (11.563”) 293.7 mm (11.563”)
Baffle cutout diameter 281.0 mm (11.063”) 357.2 mm (14.063”) 425.5 mm (16.750”) 281.0 mm (11.063”) 281.0 mm (11.063”)
Net weight 5.0 kg (11.1 lbs.) 10.3 kg (22.8 lbs.) 10.6 kg (23.4 lbs.) 8.6 kg (19 lbs.) 8.6 kg (19 lbs.)
51
Rigging and Accessories Live for Sound
EVI 12/15/28 EBK-1 (Eyebolt-Kit)

EVI-12
Speakers
Ceiling mount
EVI-12MBB black
EVI-12MBW white
EVI-15 Ceiling mount

EVI-28 Wall or ceiling mount
EVI-15MBB black
EVI-15MBW white EVI-28MBB black
EVI-28MBW white
The radius of action is 140°.
EVID 12.1 1 Eyebolt is included.

Note: One 3/8“-16-thread EVID 3.2 / 4.2 / 6.2
forged steel eyebolt is Angle markers SAM™ comes with
included. A second is each EVID™ system
necessary! and includes a
hex-key-tool. SAM™
has angle markers
to make installation
100° 90° easier.
EVID 12.1
Bracket passes EIA 636 at a
safety factor of 8:1.
The bracket for on-wall or corner

mounting and a safety eyebolt EVF Series / EVH Series
comes with EVID 12.1. 4 M10 metric eyebolts included
FRi-2082 Under balcony/on-wall mount

Xi- 1082
Under balcony or
on-wall mount
The 100° x 100°
dispersion angle
allows one to install MB-1082: black
FRi-2082 vertically
on the wall as well.
on-wall Mounting bracket
comes with FRi-2082.
52
Live for Sound Rigging and Accessories
Speakers
S-40 Wall, ceiling or stand mount
Sx 100/300, Sb 122
Note: The threat diameter can be reduced with
a standard 5/8-inch screw adapter for different 1) MB 100
mic stands. 2) MB 100 + MB 200
S-40 MB/B: black
S-40 MB/W: white Security advice:
When flown by 90° (figure 2)
don’t use eyebolts only!
1) 2)
Sx 80 Wall or ceiling mount Sx 250/SxA250 Stand mount

Sk-1 Rigging Kit
For cost effective
installation. For speakers stands
with 35 mm diameter.
Sx 80 MBB black
Sx 80 MBW white Sx 80 SM black
Sx 100 / Sx 300 / Sb 122
Horizontal Cluster 120° (2 systems) Horizontal Cluster 180° (3 systems)

2 x MB 200 + 1 x MB 300 neccessary 3 x MB 200 + 2 x MB 300 neccessary
Wall or ceiling-mount 3/8“ Quick links Vertical Cluster

neccessary
1 x MB 200 neccessary Eyebolt 2 x MB 200 neccessary
neccessary
Sx-Series™ hardware-overview: Sx 100+

MB 200 B U-bracket black
MB 200 W U-bracket white
Sx 80 Sx 300
Sx 80 SM Stand mount black MB 300 B Array-kit (2 plates) black
Sx 80 MBB U-bracket black Sb 122
Sx 80 MBW U-bracket white MB 300 W Array-kit (2 plates) white
53
ZX1
Speakers
ZX1-90 + TCA-ZX1 ZX1i + AB-ZE ZX1 - 90 + MP1 -B
ZX3 / ZX5
MB-3/MB-5 Wall/Ceiling mounting bracket CB5 cluster bracket kit
VSA-1 using HA3 EBK-3 M8 eyebolt kit
SSK-1 HA-3 or HA-5 handel adapter

to be used with VSA-1
54
Speakers
EV Innovation
EVF / EVH Series

VRK-1 VRK-2
HRK and VRK
rigging kits
(HRK not shown)
EVA / EVF / EVH Series gland nut cover plates
CDG CDNL4 CSG

Dual gland nut cover plate Dual NL4 cover plate Single Gland Nut cover plate
55
XLD281 + XLC215 + AGCD XLD281 + XS 212

Speakers
XLD281 + XS212 + CBeam XLD281 + XS212 + Dolly
56
Speakers
XLC concert/portable Rigging XLCi install rigging
B-1 Grid for XLC B-2 Grid for XLCi

(other rigging hardware included with speaker) (other rigging hardware included with speaker)
XLC and XLVC ground stack kits
XGS-3 XGS-4
57
Tour Grade Amplifiers Live for Sound
Tour Grade amplifiers are designed for most demanding sufficient headroom to ensure high dynamic outputs and
audio applications in touring sound and fixed installation. reliable operation on extreme low loads.
Based on Grounded Bridge Class-H topology, they offer a Optional IRIS-Net™ Module RCM-26 opens up a whole
unique combination of high output power, sonic excellence world of state-of-the-art DSP including FIR-Drive, remote
and High-efficiency in a compact lightweight format. control, networking and unique system supervision – down
Their integrated switch-mode power supply provides to an individual loudspeaker component.
TG5 Tour Grade Amplifier
• Up to 2 x 1900 W into 2 Ω • Slot for optional RCM-26 IRIS-Net-

• Grounded Bridge Class-H design compatible DSP and control module
• Switch-mode power supply • 11-level protection package
• Microprocessor-controlled • Only 31.4 lbs (14.2 kg)
• Front LCD panel for operation mode
set-up and monitoring
Electronics
TG7 Tour Grade Amplifier
• Up to 2 x 3500 W into 2 Ω • Slot for optional RCM-26 IRIS-Net

• Grounded Bridge Class-H design compatible DSP and control module
• Switch mode power supply • 11-level protection package
• Microprocessor-controlled • Only 32 lbs (14.5 kg)
• Front LCD panel for operation mode
set-up and monitoring
58
Live for Sound Tour Grade Amplifiers
UCC1 Remote Control Interface
• USB-CAN converter for IRIS-Net enabled devices • XLR jack for audio bus monitoring
• Supports up to 100 CAN devices • 19" rackmount panel included
• Parallel CAN connections on RJ-45 Ethercons • Status LED shows CAN activity and device status
• USB-powered
Concert
RCM-26 IRIS-Net Remote Control Module for Tour Grade Amplifiers
• Extensive DSP Functionality including • Pilot tone detection for cable supervision
FIR-Drive technology • Six recallable DSP/configuration presets
• High precision load impedance supervision • Parallel RJ-45 CAN bus connectors
• Two GPI and two GPO ports
• One-button system check allows a complete
Install
diagnostic test of all connected cables and
loudspeaker components in a matter of minutes
Mobile Audio
RCM-26 TG5 TG7
2Ω 4Ω 8Ω 2Ω 4Ω 8Ω
Continuous Output Power(1 kHz, THD 1%) 2000 W 1450 W 850 W 3500 W 2500 W 1500 W
Continuous Output Power(20-20 kHz, THD<0,2%) 1200 W 600 W 2100 W 1050 W
Maximum Bridged Output 3800 W 2900 W 7000 W 5000 W
Amplifier Gain 39 dB, 35 dB 32 dB (switchable) 41.5 dB, 35 dB, 32 dB (switchable)
Analog Inputs 2 audio inputs on internal slot connector, pre-/post fader

selectable
CAN Bus Interface 10 - 500 kbaud, 2x RJ-45 (IRIS-Net Control) Optional with RCM-26 Optional with RCM-26
DIM 30 0.02 % 0.02 %
Input Impedance (Balanced) 20 kΩ 20 kΩ
Electronics
Input Sensitivity 0 dBU/+6dBu/+7dBu (switchable) 0 dBu / 4 dBu / 9 dBu (switchable)
Intermodulation Distortion (SMPTE) 0.05 % 0.05 %
Network Control (IRIS-Net) Yes Optional Optional
Slew Rate 30 V/µs 35 V/µs
Total Harmonic Distortion 0.05 % 0.05 %
A/D Conversion 24 Bit linear, Sigma-Delta, 128 times oversampling
Data Format 24 Bit linear A/D and D/A conversion, 48 Bit processing
Internal Processing 2 DSPs (150 MHz, 300 MIPS)
Signal-to-Noise Ratio (A-weighted) 116 dB 109 dB 111 dB
THD+N < 0.005%
D/A Conversion 24 Bit, Sigma-Delta, 128 times over-sampling
Sample Rate 48 kHz
Digital Inputs AES3 (AES/EBU) format, XLR In/Thru connectors Optional with RCM-26 Optional with RCM-26
Sample Rate Conversion (SRC) 32 kHz - 192 kHz, internal Sample-Rate- Converter
FIR-Drive Yes Optional with RCM-26 Optional with RCM-26
GPIO Control Port 1 x 6-pole Euro block 2 Control Inputs 2 Control Outputs Optional with RCM-26 Optional with RCM-26
2 Reference Outputs (+5 V, 200 mA / GND)
Power Consumption 1/8 max. output power 1000 W 1450 W

@4 Ω
Power Supply 100-240 V, 50-60 Hz 100-240 V, 50-60 Hz
Control Protocol CAN Bus CAN-Bus (with RCM 26 module) CAN-Bus (with RCM 26 module)
Height X Width X Depth 3.33 in (84.7 mm) x 3.17 in (80.4 mm) x 9.06 in (230.3 mm) 3.47 in (88.1 mm) X 19 in (482.6 mm) X 20.16 in (512 mm)
Weight Net .53 lbs (240 g) 31.31 lbs (14.2 kg) 32.0 lbs (14.5 kg)
59
Precision Series Remote Control Amplifiers Live for Sound
Proven among critical installations and the highest profile IRIS-Net. software. Using state-of-the-art technologies
tours, the DSP-Controlled P-Series amplifiers combine from our signal processor developments, Electro-Voice
legendary performance with uncompromised remote- offers amplifiers that provide superior audio performance,
control and system-supervision capability with the. guaranteed.
P1200RL Precision Series DSP Remote Amplifiers

• Up to 2 x 850 W into 2 Ω • One-button system check allows a complete
• Class-AB design diagnostic test of all connected cables and
• Remote control and monitoring of all loudspeaker components in a matter of minutes
parameters via IRIS-Net software • Pilot tone detection for cable supervision
• Full input and output DSP processing with • Eight recallable DSP/configuration presets
RCM-24 DSP and control module • Parallel RJ-45 CAN bus connectors
P1200RT Precision Series DSP Remote Amplifiers

• Up to 2 x 590 W into 70/100 V line • One-button system check allows a complete
Electronics
P3000RL Precision Series DSP Remote Amplifiers

• Up to 2 x 1800 W into 2 Ω • One-button system check allows a complete
60
Live for Sound Precision Series Remote Control Amplifiers
P1200 RL P3000 RL P1200 RT
8Ω 4Ω 2Ω 8Ω 4Ω 2Ω 100V 70 V
Continous Output Power 380 W 600 W 850 W 850 W 1300 W 1800 W 590 W 580 W
(1 kHz, THD 1%)
Rated Output Power 300 W 500 W - 750 W 1200 W - 500 W 500 W

(20 Hz-20 kHz, THD <0,2%)
Maximum Bridged Output 1200 w 1700 W - 2600 W 3600 W - - -

(1 kHz, THD 1%)
THD @ Rated Output Power < 0.05% <0.1% <0.2%
DIM 30 <0.03% <0.01% <0.2% <0.3%
Concert
Intermodulation (SMPTE) <0.08% <0.001% <0.1% <0.3%
Signal-to-Noise Ratio > 105 dB >100 dB
Frequency Response 20 Hz - 20 kHz 45 Hz - 20 kHz

(-1 dB)
Dynamic Audio Limiter THD </= 1% (Inputsignal </= + 20 dBu
Protections Hi-Temperature, DC, HF, Back EMF, Peak Current Limiter, Inrush Current Liminter, Power On Delay
Install
Cooling 3(4)-stage fan, front-to-rear cooling
Input Sensivity 1.55 V (+6dBu), 20 kOhm, XLR Input

and Impedance
Maximum Input Level 8.7 V (+21 dBu)
Serial Interface Network: CAN, 2 RJ45 (CAT-5 Cabling), RS-232 for media control systems
Control Logic In 2 x 0V 5V free configurable, Easy-Remote
Mobile Audio
and Outputs
Loudspeaker Connectors Barrier Strip Speakon NL4 Barrier Strip
Dimensions 483 x 132.5 x 390 mm (52” x 19” x 15.4”) ( 3 U)

(Width x Height x Depth)
Net Weight 17 kg (37.5 lbs.) 30 kg (66.2 lbs.) 25 kg (55.1 lbs.)
The EV Linear Precision Series is a very- material will be amplified very accurately. Complete
high-quality power amplifier design to elicit maximum protection is provided for high temperature, audio limiters,
performance from any speaker system. Its ultralow power-up delay, and peak current limiters.
distortion and powerful amplifiers ensure that program
P3000 Precision Series Power Amplifiers
• Classic EV flagship performance amplifier • Three-stage front-to-rear fans
Electronics
• Up to 2 x 1800 W into 2 Ω • Complete protection package
• Extremely high sonic performance and quality • Classic EV amplifier dynamic headroom
• Class-AB design for real-world music and applications
• Dual power supply • Built-in dynamic limiters
P3000
2Ω 4Ω 8Ω
Continuous Rated Power(1 kHz, THD 1%) 2Ω 1800 Watts 1300 Watts 850 Watts
Continuous Rated Power(20-20 kHz, THD<0,2%) 1200 Watts 750 Watts
Maximum Bridged Output 3600 Watts 2600 Watts
DIM 30 0.01 %
Input Impedance (Balanced) 20 kΩ
Input Sensitivity 0 dBu / +6 dBu / +26 dB
Intermodulation Distortion (SMPTE) 0.01 %
Network Control (IRIS-Net) No
Slew Rate 40 V/µs
Total Harmonic Distortion 0.05 %
Signal-to-Noise Ratio (A-weighted) 105 dB
Height 11.3 in (33 mm)

Depth 15.35 in (390 mm)
Weight Net 63.93 lbs (29 kg)
61
Q Series Amplifiers MK II Live for Sound
As direct descendants of the legendary P3000, Q Series higher output voltage, the voltage rail is switched to the
amplifiers take Electro-Voice's unique amplifier design maximum. This process saves up to 50% of the power
to a new level. With Q Series efficient Class-H design, consumption found in conventional amplifier designs. Q
the permanent voltage rail is designed to cover the Series combines sonic excellence all in a compact and
average music signal, rather than supplying the voltage affordable package.
for maximum output power. If dynamic peaks require a
Q44 Electro-Voice Q Series Power Amplifier

• Up to 2 x 650 W into 2 Ω loudspeakers without additional subwoofers
• XLR pass-though input connections • Class-AB design
• The NL4 connection on output A also • Three-stage front-to-rear fans
carries output B on pins +/- 2 to allow easy • Complete protection package
connection to bi-amped loudspeakers • Classic EV amplifier dynamic headroom
• Switchable LPN filter extra tonal fundamentals for real-world music and applications
and "kick" with a protective low-cut for 12" or 15" • Built-in dynamic limiters
Q66 Electro-Voice Q Series Amplifier

• Up to 2 x 900W into 2 Ω loudspeakers without additional subwoofers
• XLR pass-though input connections • Class-AB design
• The NL4 connection on output A also • Three-stage front-to-rear-fans
Electronics


• Up to 2 x 1250 W into 2 Ω loudspeakers without additional subwoofers
• XLR pass-though input connections • Class-H design
62
Live for Sound Q Series Amplifiers MK II
Concert
Install
Mobile Audio
• Up to 2 x 1800 W into 2 Ω 15loudspeakers without additional subwoofers
• XLR pass-though input connections • Class-H design
and "kick" with a protective low-cut for 12" or • Built-in dynamic limiters
Electronics
Q44 Q66 Q99 Q1212
2Ω 4Ω 8Ω 2Ω 4Ω 8Ω 2Ω 4Ω 8 Ω 2Ω 4Ω 8Ω
Continuous Output Power(1 kHz, THD 1%) 650 Watts 450 Watts 270 Watts 900 Watts 600 Watts 380 Watts 1250 900 Watts 550 Watts 1800 1200 750 Watts
Watts Watts Watts
Continuous Output Power(20-20 kHz, THD<0,2%) 400 Watts 200 Watts 500 Watts 250 Watts 800 Watts 400 Watts 1100 550 Watts
Watts
Maximum Bridged Output 1300 W 900 W 1700 1200 2800 1800 3600 2400
Watts Watts Watts Watts Watts Watts
Cooling Front-to-Rear, 3-stage fans
DIM 30 0.05 %
Input Sensitivity +2.2 dBu +3.1 dBu +5.1 dBu +6.6 dBu
Amplifier Gain 32 dB
Intermodulation Distortion (SMPTE) 0.1 %
Maximum Input Voltage +21 dBu (8.69 Vrms)
Network Control (IRIS-Net) No
Slew Rate 25 V/µs 26 V/µs 27 V/µs 30 V/µs
Frequency Response 10 Hz - 40 kHz
Signal-to-Noise Ratio (A-weighted) 106 dB 107 dB 109 dB 110 dB
Height 3.47 in (88.1 mm) 3.47 in (88.1 mm) 3.47 in (88.1 mm) 3.47 in (88.1 mm)
Width 19 in (482.6 mm) 19 in (482.6 mm) 19 in (482.6 mm) 19 in (482.6 mm)
Depth 16.63 in (422.5 mm) 16.59 in (421.5 mm) 16.59 in (421.5 mm) 16.59 in (421.5 mm)
Weight Net 27.78 lbs (12.6 kg) 32.63 lbs (14.8 kg) 35.94 lbs (16.3 kg) 39.02 lbs (17.7 kg)
63
Contractor Precision Series Amplifiers Live for Sound
The CPS Series are high-performance amplifiers with attenuators, and a switchable 50 Hz high-pass filter (HPF).
unmatched dynamic range capability, ensuring the most Features include the same protection circuits typical of
reliable operation. Designed for the contractor, the CPS EV amplifiers. Complete protection is provided for high
Series feature 2-RU chassis, Phoenix-type connectors for temperature, audio limiters, power-up delay, and peak
inputs and outputs, pre-programmable power-on delay, current limiters.
easy power-on via remote contact closures, rear panel
CPS 2.4 Contractor Precision Series Class-H Power Amplifier

• Up to 2 x 650 W into 2 Ω allowing IRIS-Net control and monitoring
• Phoenix-type input and output connections • Switchable 50 Hz high-pass filter
• Remote power-on/off contact • Three-stage front-to-rear fans
• Rear-mounted attenuators • Class-AB design
• Programmable time for custom • Complete protection package
power-on delay settings
• Module slot for optional RCM-810 card,
Electronics

• Rear-mounted attenuators • Class-AB design

• Rear-mounted attenuators • Class-H design
64
Live for Sound Contractor Precision Series Amplifiers

• Up to 2 x 1800 W into 2 Ω • Module slot for optional RCM-810 card,
• Phoenix-type input and output connections allowing IRIS-Net control and monitoring
• Remote power-on/off contact • Switchable 50 Hz high-pass filter
• Rear-mounted attenuators • Three-stage front-to-rear fans
• Programmable time for custom • Class-H design
power-on delay settings • Complete protection package
Concert
CPS 8.5 Contractor Precision Series 8-ch. Amplifier
• Eight amplifier channels, each can be • Optional RCM-810 card allows for VLD
run as either low or high impedance, configuration in IRIS-Net, allowing configuration
delivering up to 500 W per channel of each output channel's power to match
Install
• Phoenix-type input and output connections any load from 2-10 Ω in 0.1 ohm steps
• Remote power-on/off contact • 50 Hz high-pass filter when operating in Hi-Z mode
• Rear-mounted attenuators • Class-D design for optimum efficiency
• Module slot for optional RCM-810 card, • Complete protection package
allowing IRIS-Net control and monitoring
Mobile Audio
• Four amplifier channels, each can be • Optional RCM-810 card allows for VLD
Electronics
• Four amplifier channels, each can be • Optional RCM-810 card allows for VLD
RCM-810
• IRIS-Net remote control module • Variable Load Drive on four- and eight-channel
for CPS series amplifiers CPS models for maximum rated power into
• Complete status control and supervision for all loads ranging from 2 Ω to 10 Ω, in steps
two-, four- and eight-channel models of 0.1 ohm, controlled via IRIS-Net
• Load-monitoring function
65
Contractor Precision Series Amplifiers Live for Sound
CPS 2.4 CPS 2.6 CPS 2.9 CPS 2.12
2Ω 4Ω 8Ω 2Ω 4Ω 8Ω 2Ω 4Ω 8Ω 2Ω 4Ω 8Ω
Continuous Output Power(1 kHz, THD 1%) 650 W 450 W 270 W 900 W 600 W 380 W 1250 W 900 W 550 W 1800 W 1200 W 750 W
Continuous Output Power(20-20 kHz, 400 W 200 W 500 W 250 W 800 W 400 W 1100 W 550 W
THD<0,2%)
Maximum Bridged Output 1300 W 900 W 1800 W 1200 W 2800 W 1800 W 3600 W 2400 W
Amplifier Gain 32 dB
Analog Inputs 2, electronically balanced, Phoenix-type
CAN Bus Interface Yes (With Optional RCM-810 Card)
Cooling Front-to-Rear, 3-stage-fans
Crossover Type Optional Modules Optional Modules Modular Modular
DIM 30 0.05 % 0.02 % 0.05 % 0.05 %
Input Sensitivity 2.2 dBu (1.0V) +3.1 dBu (1.11Vrms) +5.1 dBu (1.39 Vrms) +6.6 dBu (1.66 Vrms)
Intermodulation Distortion (SMPTE) 0.1 % 0.05 % 0.1 % 0.1 %
Maximum Input Voltage +21 dBu (8.69 Vrms) +21 dBu (8.69 Vrms) +21 dBu (8.69 Vrms) +21 dBu (8.69 Vrms)
Network Control (IRIS-Net) Optional Optional Optional Optional
Slew Rate 25 V/µs 26 V/µs 27 V/µs 30 V/µs
Variable Load Drive (VLD) No
Frequency Response 10 Hz - 40 kHz (±1 dB)
Height 3.47 in (88.1 mm)

Depth 16.59 in (421.5 mm)
Weight Net 27.78 lbs (12.13.23 lbs (6 kg)) 32.63 lbs (14.8 kg) 35.94 lbs (16.3 kg) 39.02 lbs (17.15.43 lbs (7 kg))
CPS 4.10 CPS 4.5 CPS 8.5
2Ω 4Ω 8Ω 2Ω 4Ω 8Ω 2Ω 4Ω 8Ω
Continuous Rated Power(1 kHz, THD 1%) 1000 W 1000 W 500 W 500 W 500 W 250 W 500 W 500 W 250 W
Continuous Rated Power(20-20 kHz, 900 W 450 W 450 W 225 W 450 W 225 W
THD<0,2%)
Maximum Bridged Output 2000 W 2000 W 1000 W 1000 W 1000 W 1000 W
Amplifier Gain 32 dB (Lo-Z), 33 dB (70V), 36 dB (100V) 32 dB (Lo-Z), 33 dB (70V), 36 dB (100V) 32 dB (Lo-Z), 33 dB (70V), 36 dB (100V)
Analog Inputs 4, electronically balanced, Phoenix-type 4, electronically balanced, Phoenix-type 8, electronically balanced, Phoenix-type
Electronics
CAN Bus Interface Yes (With Optional RCM-810 Card) Yes (With Optional RCM-810 Card) Yes (With Optional RCM-810 Card)
Cooling Front-to-Rear, continuously variable fans
DIM 30 0.02 % 0.02 % 0.02 %
Input Sensitivity 0 dBu (.775V)-2 Ω, +3 dBu (1.1V)-4/8 Ω, +6 dBu (1.55) 0 dBu (.775V)-2 Ω, +3 dBu (1.1V)-4/8 Ω, +6 dBu (1.55) 0 dBu (.775V)-2 Ω, +3 dBu (1.1V)-4/8 Ω, +6 dBu (1.55)
70V/100V 70V/100V 70V/100V
Intermodulation Distortion (SMPTE) 0.05 % 0.05 %
Maximum Input Voltage +22 (9.76 Vrms)
Network Control (IRIS-Net) Optional Optional Optional
Slew Rate 28 V/µs
Variable Load Drive (VLD) Yes
Frequency Response 15 Hz-30 kHz
Continuous Rated Power(1 kHz, THD 1%) 1000 W 500 W 500 W

100v
Continuous Rated Power(1 kHz, THD 1000 W 500 W 500 W

1%) 70v
Continuous Rated Power(20-20 kHz, 900 W 450 W 500 W

THD<0,2%) 100v
Continuous Rated Power(20-20 kHz, 900 W 450 W 450 W

THD<0,2%) 70v
Height 3.47 in (88.1 mm)

Depth 16.59 in (421.5 mm)
Weight Net 24.47 lbs (11.1 kg) 24.47 lbs (11.1 kg) 30.8 lbs (13.9 kg)
66
Live for Sound Compact Precision
Concert
The CP Series are high-performance amplifiers with over their average continuous rating. Features include
unmatched dynamic range capability, ensuring the the same comprehensive protection circuits typical of
most reliable operation favored by users in all sound EV amplifiers. Complete protection is provided for high
Install
reinforcement applications. The amplifiers' power supply temperature, audio limiters, power-up delay, and peak
is specifically designed to deliver high peak signals, which current limiters.
provide 30 percent more burst signal output headroom
Mobile Audio
CP3000S Compact Precision Series Class-H Power Amplifier
• Up to 2 x 1600 W into 2 Ω • Switch mode power supply
• XLR pass-though input connections • Three-stage front-to-rear fans
• The NL4 connection on output A also • Complete protection package
carries output B on pins +/- 2 to allow easy • Classic EV amplifier dynamic headroom
connection to bi-amped loudspeakers for real-world music and applications
• Extremely lightweight and highly efficient • Built-in dynamic limiters
• Class-H design
CP4000S Compact Precision Series Class-H Power Amplifier

• Up to 2 x 2100 W into 2 Ω • Switch mode power supply
Electronics
• XLR pass-though input connections • Three-stage front-to-rear fans
• The NL4 connection on output A also • Complete protection package
carries output B on pins +/- 2 to allow easy • Classic EV amplifier dynamic headroom
connection to bi-amped loudspeakers for real-world music and applications
• Extremely lightweight and highly efficient • Built-in dynamic limiters
• Class-H design
CP3000S CP4000S
2Ω 4Ω 8Ω 2Ω 4Ω 8Ω
Maximum power (1k Hz; THD <1%) 1600 W 1100 W 600 W 2100 W 1500 W 900 W
Rated power (20 Hz–20 kHz; THD <0.2%) 900 W 450 W 1200 W 600 W
Maximum bridged output (1,000 Hz; <1% THD) 3200 W 2200 W 4200 W 3000 W
Slew rate 35 V/µs 35 V/µs
Total harmonic distortion <0.05% <0.05%
Intermodulation distortion (SMPTE) <0.02% <0.02%
Crosstalk (at 1,000 Hz) <-80 dB <-80 dB
Input impedance (balanced) 20 kΩ 20 kΩ
Signal-to-noise ratio (dB A-weighted) 107 dB 108 dB
Dimensions (W x H x D) 483 x 88.1 x 368.8 mm 483 x 88.1 x 384 mm

19” x 3.5” x 15.22” 19” x 3.5” x 15.5”
Net weight 8.15 kg (17.96 lbs.) 8.70 kg (19.2 lbs)
67
Commercial Power Amplifiers Live for Sound
EV Commercial Power amplifiers are designed to operate typical of EV amplifiers. Complete protection is provided
under a variety of adverse conditions without fail. Several for high temperature, audio limiters, power-up delay, and
configurations, power levels, and features are available to peak current limiters. Phoenix-type connectors for inputs
suit nearly any commercial application. Features include and outputs allow for easy rack wiring.
many of the same comprehensive protection circuits
PA1250T 1x250-Watt Single Channel Power Amplifier

• Up to 1 x 270 W into 70/100 V lines • High-efficiency circuitry design
• 2RU design • Three-stage front-to-rear fans
• Stepped rear attenuators • Complete protection package
• Selectable 50 Hz or 300 Hz high-pass filter
• Phoenix-type inputs and outputs
PA2250T 2x250-Watt Dual Channel Power Amplifier

• Up to 2 x 270 W into 70/100 V or 4-ohm lines • Selectable 50 Hz or 300 Hz high-pass filter
• Bridged mode provides 1 x • Phoenix-type inputs and outputs
Electronics
540 W into 8-ohm load • High-efficiency circuitry design

PA2400T 2x400-Watt Dual Channel Power Amplifier

• Up to 2 x 430 W into 70/100 V or 4-ohm lines • Phoenix-type inputs and outputs
• Bridged mode provides 1 x • High-efficiency circuitry design
860 W into 8-ohm load • Three-stage front-to-rear fans
• 2RU design • Complete protection package
• Stepped rear attenuators
68
Live for Sound Commercial Power Amplifiers
PA2450L 2x450-Watt Dual Channel Power Amplifier

• Up to 2 x 450 W into 4 Ω • High-efficiency circuitry design
• Bridged mode provides 1 x 900 W into 8-ohm load • Three-stage front-to-rear fans
• 2RU design • Complete protection package
Concert
• Stepped rear attenuators
• Phoenix-type inputs and outputs
Install
PA4150L 4x150-Watt Four-Channel Power Amplifier
Mobile Audio
• Up to 4 x 160 W into 4 Ω • Phoenix-type inputs and outputs
• Bridged mode provides 2 x 315 W into 8-ohm load • High-efficiency circuitry design
Electronics
PA2450L PA4150L PA2400T PA2250T PA1250T 7100
Number of Channels 2 4 2 2 1 2
Load Impedance 8/4 Ω 8/4 Ω 8/4 Ω/100V/70V 8/4 Ω/100V/70V 100V/70V 8/4 Ω
Rated output power 220W/450W 100W/160W 215W/430W/430W/430W 135W/270W/270W/270W 270W/270W 100 W /145 W
(*rated load) THD<1%, 1kHz
Rated output power 200W/400W 75W/150W 200W/400W/400W/400W 125W/250W/250W/250W 250W/250W 75 W/100 W

(*rated load) THD<0.2%,
20Hz – 20kHz
Slew rate at 1kHz V/µs 28 16 25/25/65/46 18/18/61/41 61/41 19 V / uS
Frequency response -1dB, <10Hz -40kHz <10Hz -40kHz 65Hz -40kHz/65Hz -20kHz 65Hz -40kHz/65Hz -20kHz 65Hz -20kHz 20 Hz - 20 kHz
ref. 1kHz
Input impedance 20Hz – 20kHz, >20kohm >20kohm >20kohm >20kohm >20kohm balanced 30 kOhm balanced
Input sensitivity @ rated output 0dBu (775mV) 0dBu (775mV) 0dBu (775mV) 0dBu (775mV) 0dBu (775mV) 0 dBu (775 mV)
power or voltage, 1kHz
THD @ rated output <0.1% <0.1% <0.1% <0.1% <0.1% < 0.1 %
power MBW=80kHz, 1kHz
IMD-SMPTE 60Hz, 7kHz <0.1% <0.1% <0.1% <0.1% <0.1% < 0.1 %
DIM30 3.15kHz, 15kHz <0.1% <0.1% <0.1% <0.1% <0.1%
Crosstalk ref. 1kHz, @ 10% rated <-75dB <-75dB <-75dB <-75dB <-75dB
output power
Dimensions (W x H x D) 483mm x 88mm x 406mm 483mm x 88mm x 406mm 483mm x 88mm x 406mm 483mm x 88mm x 406mm 483mm x 88mm x 406mm 483 x 44.4 x 304 mm
(19”x 3.5”x16”) (19”x 3.5”x16”) (19”x 3.5”x16”) (19”x 3.5”x16”) (19”x 3.5”x16”) (19" x 1.75" x 12")
Weight 16.5kg (36.34lbs) 18kg(39.65lbs) 26kg(57.27lbs) 23.5kg(51.76lbs ) 16.5kg(36.34lbs) 8.16 kg (18.2 lb)
69
NetMax Digital Matrix System Live for Sound
The EV NetMax N8000 is an all-purpose digital audio device offer up to 32 local audio channels. Each slot can
system controller with outstanding performance features. be equipped either with an audio input module or an audio
NetMax is highly flexible due to the modular hardware output module. The modular signal processing in the N8000
design, which renders many other applications possible. is implemented on powerful audio signal processors.
Four slots with 8- channel audio modules at the rear of the
N8000-1500 NetMax 1500 MIPS Digital Matrix Controller

• 1500 MIPS internal processing • Extensive range of DSP functions
• Up to 1900 MIPS of processing • Modular hardware chassis
power available per unit • Integrated supervision, scheduling
• Cobranet and Dante audio networking options and auto-compiling DSP
• Supports Ethernet, RS-232, USB and • Fully-programmable analog and digital GPIO support
CAN Communications Protocols
N8000 NetMax 300 MIPS Digital Matrix Controller

• Full IRIS-Net software support power available per unit
• 32-channel digital matrix bus • Extensive range of DSP functions
• 114 dB dynamic range • Modular hardware chassis
• Cobranet and Dante audio networking options • Integrated supervision, scheduling
• Supports Ethernet, RS-232, USB and and auto-compiling DSP
CAN communications protocols • Fully-programmable analog and digital GPIO support
Electronics
• Up to 1000 MIPS of processing
AI-1 NetMax Analog Input Card
• Eight line-level inputs on Euroblock connectors • Automatic configuration-Indication of

• Electronically balanced inputs installation and removal in IRIS-Net
• 20 kΩ input impedance • DSP (100 MIPS) on board
• 117 dB dynamic range provides superior sonic quality
MI-1 NetMax Analog Mic/Line Input Card

• Eight mic/line-level inputs on Euroblock connectors • Automatic configuration-Indication of
• Electronically balanced inputs installation and removal in IRIS-Net
• Selectable mic/line pad via IRIS-Net • DSP (100 MIPS) on board
• 48 V phantom power
• Gain and level adjustable via IRIS-Net
70
Live for Sound NetMax Digital Matrix System
PWS-4, 6, C Programmable Wall Stations TPI-8/TPI-12 Touch Panel Interfaces

• Up to three front units in a wallstation – easy daisy • Custom design of the control surface –
chaining of any combination PWS 4/6 modules individual configuration via IRIS-Net™,
using included connection wire functionality and graphical representation
• Easy labeling of buttons – label field protected for all kinds of applications.
by a transparent cover • Long life span and noiseless operation
• Configuration via IRIS-Net – Buttons and LEDs – no fan, no hard disk.
can be used for various functions • Reliable server technology –
• Customizable button behavior- Buttons can be Win XP Embedded™ operating system,
configured as momentary, latching, or radio groups, industry approved product quality.
Concert
and all have status LEDs to indicate current state.
DM-1 NetMax Dante Audio Network Module AO-1 NetMax 8 Channel Analog Output Card
• Eight line-level outputs on Euroblock connectors
• Gigabit primary and secondary Ethernet interfaces • Electronically balanced outputs
Install
• Typical latency: 1 mS • 100Ω output impedance
• Dante Zen device discovery • 118 dB dynamic range provides
• Compatible with Dante Virtual Soundcard superior sonic quality
• Automatic configuration-Indication of
installation and removal in IRIS-Net
Mobile Audio
• DSP (100 MIPS) on board
DI-1 NetMax 8 Channel Digital Input Card DO-1 NetMax 8 Channel Digital Output Card
• Four inputs for eight channels of AES/
• Four outputs for eight channels of
EBU or S/PDIF digital audio input
AES/EBU digital audio output
• Euroblock or TOSLINK optical input connectors
• 48 kHz sampling rate
• Accepts sample rates of 32-192 kHz
• +21 dBu maximum output level
• Independent sample rate converters allow inputs
• Automatic configuration-Indication of
of different sample rates on each DI-1 input
installation and removal in IRIS-Net
• Lock indication LED
Electronics
CM-1 NetMax CobraNet Audio Network Module
• 100BASE-TX ethernet interface; 100Mbit/s full- • Internal audio input interface for receiving 32
duplex Ethernet interface; IEEE 802.3u compatible. digital audio channels with 48 kHz sample
• Secondary 100BASE-TX Ethernet interface. rate and 16, 20, or 24-bit word length.
Second Ethernet interface for the connection of • Control, monitoring, configuration, and
a redundant network to establish fault tolerant firmware updates via Ethernet protocol.
systems. Internal audio output interface for the • Status LEDs. Link, activity, fault, and CobraNet
transmission of 32 digital audio channels with 48 conductor status indication via Ethernet connectors.
kHz sample rate and 16, 20, or 24-bit word length
DSP-1 N8000 Microprocesssor Expansion Module
• 300 MIPS computing capacity - doubles the • Double precision DSP algorithms.
DSP power of a NetMax System Controller • Automatic configuration - signals whether
• Two RAM banks (512k x 24 Bit) - allow for a new module has been inserted,
additional delay lines up to 21.8 seconds or if one has been removed.
• 48-bit signal processing.
71
Signal Processors Live for Sound
Proven in thousands of installations and live applications digital loudspeaker controllers and processors, providing
around the world including the Olympics, the FIFA World 48-bit filter algorithms, 24-bit AD/DA conversion, and a
Cup, Live 8, and Live Earth, EV delivers truly state-of- dynamic range of 115 dB. The EV DC-One is a two-in, six-
the-art DSP for today's applications. EV's flagship digital out digital signal processor for loudspeaker management
sound system processor, the Dx46, sets the standard for and optimization.
Dx46 FIR Drive Sound System Processor
• 2x6 FIR-Drive Loudspeaker Processor • -6 dB Switchable Analog Pad Inserted

• Analog and AES/EBU Inputs Before A/D Converters On Inputs
• Full IRIS-Net Control and Configuration • 4 Separate Delay Sections
• Ethernet and USB Data Interfaces • 5 Contact Closure Inputs
• Full Loudspeaker Protection Package, • 60 Factory Presets
Including PA Limiters and TEMP Limiters • 30 User Presets
• Dedicated Array EQ and Delay Sections • Unique Edit/Compare mode for
For Advanced Applications audible parameter adjustment
Electronics
DC-One Two-In-Six-Out Loudspeaker Processor

• USB connection for DC-One Editor Software Control • 20 User Presets
• Analog or AES/EBU Inputs • 60 Factory Presets
• 6 dB analog pad placed before A/D • Unique Edit/Compare Mode for comparing
converter for system protection edited Presets and settings
• Highly customizeable security settings • 6 predefined Operation Configurations,
• Contact closure interface for remote Preset recall including Free Edit
72
Live for Sound Signal Processors
DC-One Editor Software DC-One PC Control Software
Concert
• PC editor for DC-One configuration • State-of-the-art graphics provide a highly detailed,
• Provides detailed, real-time control and easy to use over view of a complete system
monitoring of DC-One hardware • Intuitive navigation and block diagrams
• Unique security and lock-out functions provide easy access to all DC-One
are available and highly customizable functions and DSP sections
through the DC-One editor software • Easy connection to DC-One hardware via USB
Install
Mobile Audio
Dx46 DC-One
Analog Inputs 2 XLR (Electronically Balanced), 2 XLR THRU OUT (Electronically Balanced) 2 XLR (Electronically Balanced), 2 XLR THRU OUT (Electronically Balanced)
Analog Outputs 6 XLR (Electronically Balanced) 6 XLR (Electronically Balanced)
Digital Inputs 1 XLR AES/EBU (2 Ch) 1 XLR AES/EBU (2 Ch)
Maximum Input Voltage 8.7 V / +21 dBu (Without -6 dB Analog Pad Engaged) 8.7 V / +21 dBu (Without -6 dB Analog Pad Engaged)
Nominal Input Voltage 1.55V/+ 6 dBu 1.23 V / +4 dBu
Input Impedance (Balanced) 10 kΩ 10 kΩ
Maximum Output Voltage 8.7 V / +21 dBu 8.7 V / +21 dBu
Nominal Output Voltage 1.55 V (+6 dBu) 1.23 V / +4 dBu
Output Impedance (Balanced) 50 Ω 50 Ω
Electronics
Frequency Response 20 Hz - 40 kHz 10 Hz - 22 kHz (±0.5 dB)
Dynamic Range 116 dB (A-weighted) 111 dB (unweighted, band limited 22 Hz - 22 kHz)
THD+N <0,002% (band limited 20 Hz to 20 kHz) < 0.01% (band limited 22 Hz - 22 kHz)
A/D Conversion 24-Bit Delta Sigma 24-bit/sigma-delta (linear phase) 128 times oversampling
D/A Conversion 24-Bit Delta Sigma 24-bit/sigma-delta 128 times oversampling
Data Format 24-Bit 24-Bit
Internal Processing 48-Bit Double Precision 32-Bit Floating Point
Sample Rate 48 kHz 48 kHz
Control Protocol USB, Ethernet Front Panel USB Connector
Height X Width X Depth 1.74 in (44.25 mm) X 19 in (482.6 mm) X 14 in (355.6 mm) 1.75 in (44.45 mm) X 19 in (482.6 mm) X 14 in (355.6 mm)
Weight Net 10.14 lbs (4.6 kg) 10.14 lbs (4.6 kg)
73
74
Mobile Audio Concert
Mobile Audio Concert
75
Concert
Install
Mobile Audio
Commercial
Bosch Communications Systems

Americas
Headquarters Americas
Bosch Security Systems, Inc.
12000 Portland Ave South,
Burnsville, MN 55337, USA
USA–Ph: 1 800 392 3497
Fax: 1 800 955 6831
Canada–Ph: 1 866 505 5551
Fax: 1 866 336 8467
©2010 Bosch Security Systems, Inc. LIT000473000 Latin America–Ph: 1 952 887 5532
Fax: 1 952 736 4212

Ev Prosound 2011-Catalog

Uploaded by

Copyright:

Available Formats

Ev Prosound 2011-Catalog

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ev Prosound 2011-Catalog

Uploaded by

Copyright:

Available Formats

Speakers and Electronics

mics • dsp • amps • speakers

Xsub(F) X-Line Two x 18" Subwoofer

Freq. Range. (-10 dB) 28 Hz – 17 kHz 28 Hz – 17 kHz 28 Hz – 500 Hz

Horizontal Coverage 90° 120 ° —

MB Power Handling2 600 W cont./2400 W peak 600 W cont./2400 W peak —

HF Power Handling3 225 W cont./900 W peak 225 W cont./900 W peak —

Sensitivity 1w@1m (LF/MB/HF)* 98/108/114 dB 97/107/114 dB 104 dB

Max. SPL (calc., peak) (LF/MB/HF)* 134/142/144 dB 133/141/144 dB 141 dB

Sensitivity** 1w/10m (Peak) 135 dB 135 dB 126 dB

LF Transducer 2 x 15-in EVX-155PL 2 x 15-in EVX-155PL 2 x 18-in EVX-180B

MB Transducer 2 x 8-in ND08 2 x 8-in ND08 —

HF Transducer 3 x 3-in ND6-16 3 x 3-in ND6-16 —

Connectors 2 Neutrik® NL8 2 Neutrik® NL8 2 Neutrik® NL8

Grille Powder-coated steel Powder-coated steel Powder-coated steel

XLD281 Very Compact 120° H Dual 8"Line Array System

• Full Bandwidth 3-way Element (60Hz-20kHz) • Versatile Subwoofer Integration

XLD291 Very Compact 90° H Dual 8"Line Array System

• Very compact, lightweight • Versatile subwoofer integration

XCS312 Triple 12"Cardioid Very Compact Line-array Bass Element

• Three DVX3120 12" low-frequency transducers • Self-contained rigging hardware

• XLE181: 120°h x 10°v • Simple, Quick Integrated Rigging

Horizontal Coverage 120° 90 ° 120° 90 ° 200°

Sensitivity 1w@1m (LF1&LF2/HF)* 99/112 dB 99/113 dB 99/112 dB 99/113 dB 100 dB

Sensitivity** 1w/10m (Peak) 129 dB 130 dB 129 dB 130 dB 121 dB

LF2 Transducer 1 x 8-in DVN2080 1 x 8-in DVN2080 — — 1 x 12-in DVX3120A

HF Transducer 2 x 2-in ND2S 2 x 2-in ND2S 2 x 2-in ND2S 2 x 2-in ND2S —

Xlc215 High-Output Dual 15" Subwoofer Line-array Element

Xlc 127DVX Xlc 907DVX Xlc 215

Freq. Range. (-10 dB) 54 Hz – 17 kHz 54 Hz – 17 kHz

Horizontal Coverage 120° 90 ° 300°

MB Power Handling2 300 W cont./1200 W peak 300 W cont./1200 W peak —

HF Power Handling3 150 W cont./600 W peak 150 W cont./600 W peak —

Sensitivity 1w@1m (LF/MB/HF)* 95/101/111 dB 95/101/112 dB 103 dB

Max. SPL (calc., peak) (LF/MB/HF)* 126/132/139 dB 126/132/140 dB 139 dB

Sensitivity** 1w/10m (Peak) 130 dB 130 dB 124 dB

LF Transducer 1 x 12-in DVX3121A 1 x 12-in DVX3121A 2 x 15-in DVX3151A

MB Transducer 2 x 6.5-in DVN 2065 2 x 6.5-in DVN2065 —

HF Transducer 2 x 3-in ND6-16 2 x 3-in ND6-16 —

Connectors 2 Neutrik® NL8 2 Neutrik® NL8 2 Neutrik® NL8

Grille Powder-coated steel Powder-coated steel Powder-coated steel

362 x 991 x 572 mm 362 x 990 x 572 mm 546 x 991 x 572 mm

Xlci 215 High-Output Dual 15" Subwoofer Line-array Element

Xlci 127DVX Xlci 907DVX Xlci 215

Freq. Range. (-10 dB) 54 Hz – 17 kHz 54 Hz – 17 kHz

Horizontal Coverage 120° 90 ° 300°

MB Power Handling2 300 W cont./1200 W peak 300 W cont./1200 W peak —

HF Power Handling3 150 W cont./600 W peak 150 W cont./600 W peak —

Sensitivity 1w@1m (LF/MB/HF)* 95/101/111 dB 95/101/112 dB 103 dB

Max. SPL (calc., peak) (LF/MB/HF)* 126/132/139 dB 126/132/140 dB 139 dB

Sensitivity** 1w/10m (Peak) 130 dB 130 dB 124 dB

LF Transducer 1 x 12-in DVX3121A 1 x 12-in DVX3121A 2 x 15-in DVX3151A

MB Transducer 2 x 6.5-in DVN 2065 2 x 6.5-in DVN2065 —

HF Transducer 2 x 3-in ND6-16 2 x 3-in ND6-16 —

Connectors 2 Neutrik® NL8 2 Neutrik® NL8 2 Neutrik® NL8

Grille Powder-coated steel Powder-coated steel Powder-coated steel

362 x 991 x 572 mm 362 x 990 x 572 mm 546 x 991 x 572 mm

Xw12A Floor-Monitor Xw15A Floor-Monitor

• 2-way high-output Floor monitor • 2-way high-output Floor monitor

Recommended High-Pass Frequency Systemcontroller Systemcontroller