The RM 90GO! is a tracked mobile impact crusher with a maximum output of 200 tons per hour. It has an inlet opening of 860 x 650 mm and can process material up to 650 mm in size. Powered by a John Deere diesel engine, it is operated by one person using radio control. Additional options include a magnetic separator, dust suppression, and a mobile screen box that attaches to allow for precise screening of crushed material.
The RM 90GO! is a tracked mobile impact crusher with a maximum output of 200 tons per hour. It has an inlet opening of 860 x 650 mm and can process material up to 650 mm in size. Powered by a John Deere diesel engine, it is operated by one person using radio control. Additional options include a magnetic separator, dust suppression, and a mobile screen box that attaches to allow for precise screening of crushed material.
The RM 90GO! is a tracked mobile impact crusher with a maximum output of 200 tons per hour. It has an inlet opening of 860 x 650 mm and can process material up to 650 mm in size. Powered by a John Deere diesel engine, it is operated by one person using radio control. Additional options include a magnetic separator, dust suppression, and a mobile screen box that attaches to allow for precise screening of crushed material.
The RM 90GO! is a tracked mobile impact crusher with a maximum output of 200 tons per hour. It has an inlet opening of 860 x 650 mm and can process material up to 650 mm in size. Powered by a John Deere diesel engine, it is operated by one person using radio control. Additional options include a magnetic separator, dust suppression, and a mobile screen box that attaches to allow for precise screening of crushed material.
performance RM 90GO! No COMPROMISES MAXIMUM FLEXIBILITY, EASY TRANSPORT.
90GO! data RM 90GO! – Tracked Mobile impact crusher Output Up to 200 t/h, depending on material Feed material size Edge length max. 650 mm Inlet opening 860 x 650 mm Crusher unit RUBBLE MASTER impact crusher with 2 or 4 hammers Operation One operator using radio control for crushing and manoeuvring operations Feed unit asymmetric vibro feeder with 2.6 m3 and 2 unbalanced motors each 3.1 kW, loading height 2,880 mm, effective feed length and width: 2,980 x 1,990 mm Feed control system for automatic crusher feeding Hardox 400 wear lining Prescreening Efficient prescreen with mesh screen Screen area 1,050 x 800 mm discharge on main conveyor belt by means of fully integrated bypass chute or via optional side discharge belt Main discharge belt (crushed material) Folding conveyor 800 mm wide, folds into transport position hydraulically Discharge height 2,950 mm Discharge belt (screened material) Folding conveyor 500 mm wide, folds into transport position hydraulically Discharge height 2,400 mm Power unit John Deere (Stage III A at constant engine speed), 6 cylinder, 194 kW at 1,800 rpm, synchronous generator 40 kVA 400 V, electrical outlets 230 V and 400 V for external drives up to 15 kVA, optional John Deere diesel engine (Stage III B) with particle filter, 164 kW at 1,800 rpm. Release system To remove blockages inside crusher Magnetic separator Ultra-strong magnet, operates to left and right, belt width 800 mm Transport system Crawler gear Weight 23,600 kg Options Dust suppression using water spray inside crusher and at outlet and belts Diesel filling pump Crusher hammer changing system Cable remote control Central lubrication system Blind plate for grizzly Add-on equipment RM MS95GO! mobile single-deck screen box for RM 90GO! screen area 2.3 x 1.1 m with two belts. Weight 3,000 kg for precise screen separation, transport on RM 90GO! RM RFB7540GO! hopper refeeding or swivel to stockpile, transport on MS95GO! Weight 900 kg (with RM MS95GO! 3,900 kg)
RUBBLE MASTER HMH GmbH | Im Südpark 196 | AT 4030 Linz - Austria
