Catalogo Generale Croci Eng Ok

THE SAFETY
shutter
A SAFE CHOICE
From pre-sales and after-sales
assistance to technical, commercial
and marketing consultancy, from
the widespread distribution network
to the continuous training courses,
Croci takes care of every detail to
always guarantee high levels of
professionalism.
The company works with a constant

attention to quality at all times, from
the choice of the best suppliers
of raw materials to the monitoring
during processing, up to the total
guarantee of 5 years and 3 insurance
on products in the post-sale phase: a
winning formula to give you and your
customers the maximum reliability.
A SHUTTER WORLD
INDEX
ROLLING SHUTTERS LUX SERIE
PROFILES WITH FOAM INSULATION PAGE EXTRUDED ALUMINUM ROLLING SHUTTERS PAGE
ALUMINUM PROFILES WITH HIGH DENSITY FOAM ARIALUX 50
SAR-117 8 VISIOLUX 52
SAR-132 10 SECURLUX 54
THERMOLUX 56
ALUMINUM PROFILES WITH MEDIUM DENSITY FOAM
AXIOLUX 58
AR-28 12
AR-37 14
AR-17 16
AR-32 18
GIRASOLE.2 PAGE
STEEL PROFILES WITH MEDIUM DENSITY FOAM
GIRASOLE 60
AC-55 20
EXTRUDED ALUMINUM PROFILES PAGE

ES-28 22
ES-44 24
ES-55 26
SAR-115 28
END SLATS PAGE

END SLATS AND GASKETS 30
COLOR RANGE 32
EXTRUDED ALUMINUM GUIDE RAILS PAGE

GUIDE RAILS FOR PROFILES 7,5-9MM 34
GUIDE RAILS FOR PROFILES 11-14MM 34
ENTRY GUIDES 36
GASKETS AND BRUSHES 37
SIZES SURVEY 38
ACCESSORIES PAGE
SIDE PLUGS 40
STAPLER AND STAPLES 42
JUNCTIONS TO ROLL TUBE 42
JUNCTIONS TO ROLL TUBE - SHEET 44
SECURITY ACCESSORIES 45
ANTI-LIFTING SECURITY SYSTEMS - SHEET 47
4
SHUTTERBOX TAP-GARAGE
ALUMINUM SHUTTERBOX UNIBOX PAGE PROFILES PAGE
MINI-SHUTTERBOX PROFILES 68 ALUMINUM PROFILES WITH MEDIUM DENSITY FOAM
MAXI-SHUTTERBOX PROFILES 68 AR-77 106
SIDE FRAMES AND ACCESSORIES FOR MINI-SHUTTERBOX 69 ROLLING SHUTTERS 109
SIDE FRAMES AND ACCESSORIES FOR MAXI-SHUTTERBOX 70 SYSTEMS 110
APPLICATIONS 71
GUIDE RAILS FOR MINI-SHUTTERBOX 72
GUIDE RAILS FOR MAXI-SHUTTERBOX 74
ROLLING SHUTTERS PAGE
GASKETS ANS BRUSHES FOR GUIDE RAILS 73
EXTRUDED ALUMINUM PROFILES 112
MINI-SHUTTERBOX WITH INSECT SCREEN 74
GASKETS FOR GUIDE RAILS 113
COLOR RANGE 77
ROLLING SHUTTER ACCESSORIES 114
OPERATIONS SYSTEMS PAGE

SHUTTERBOX SYSTEM 116
WALL SYSTEM 122
OPERATIONS PAGE CEILING SYSTEM 128
STRAP OPERATION - STANDARD SYSTEM 80
STRAP OPERATION - MINI-SHUTTERBOX 81
CRANK OPERATION - STANDARD AND SHUTTERBOX SYSTEM
CRANK OPERATION - MINI-SHUTTERBOX
84
85 TAP-BLIND
CRANK OPERATION - MAXI-SHUTTERBOX 85
MOTOR OPERATION - MOTORS 89
TAP-BLIND PAGE
MOTOR OPERATION - STANDARD SYSTEM 91
ROLLING SHUTTER GRILLE 138
MOTOR OPERATION - SHUTTERBOX SYSTEM 92
BURGLAR-PROOF CERTIFICATION 140
COMMON ACCESSORIES 99
STANDARD SYSTEM 142
SHUTTERBOX SYSTEM 144
TECHNICAL DATA 147
INFO
TECHNICAL NOTES 147
DECLARATION OF PERFORMANCE 148
SALES CONDITIONS 150
5
ROLLING
SHUTTERS
ROLLING SHUTTERS
Rolling shutters filter the external light, ensure your privacy and increase the tranquillity and the comfort of
your house. They are the best solution to live in harmony with the environment and the most common and
advantageous means of home closure.
Croci rolling shutters combine all the pleasing aspects of living at home: from safety to comfort, quietness,
aesthetics and energy saving. They also guarantee a high ease of use, both in everyday life and during
installation and maintenance.
SAR-117 ROLLING SHUTTERS
ALUMINUM PROFILE
TAP SECURITY WITH HIGH DENSITY
FOAM
TECHNICAL DATA
Weight per lm: 0,162 kg approx.
Weight per sqm: 3,70 kg approx.
Profiles per sqm: 22,70
44
Max sizes: Max width: 3,70m
Max height: 3,50m Max surface: 9,50sqm
Standard packing: 30 slats 6,5lm

9
ROLLING SHUTTERS
Assembled rolling shutter (punched)

with junction spring, conic stoppers Variation: assembled
and side plugs (TLSAR117C), standard with nails
aluminum end slat TE7x56
ROLL DIAMETER
SHUTTER HEIGHT (mm) - with junction spring 5001
1000 1300 1600 1900 2200 2500 2800 3000 3300 3500
ROLL TUBE 40MM 135 150 165 180 185 199 205 219 219 230
ROLL TUBE 60MM 145 159 169 175 189 195 205 209 225 225
ROLL TUBE 70MM 155 169 169 185 191 199 215 215 225 229
SHUTTER HEIGHT (mm) - with anti-lifting system SEC

1000 1300 1600 1900 2200 2500 2800 3000 3300 3500
ROLL TUBE 40MM 155 175 175 185 205 205 225 225 235 235
ROLL TUBE 60MM 165 171 185 195 205 221 225 229 235 235
ROLL TUBE 70MM 160 173 189 189 207 207 219 219 233 233
OPENING HEIGHT FOR SHUTTERBOX UNIBOX

SHUTTERBOX SIZE JUNCTION SPRING 5001*
137 150 165 180 205 230

ROLL TUBE 40MM 1100 1450 1800 2240 3000 3500
ROLL TUBE 60MM 830 1230 1710 2110 3000 3500
*SHUTTERBOX APPLICATION 5
8
ROLLING SHUTTERS SAR-117
WIND RESISTANCE CLASS
ROLLING SHUTTER FINISHED WIDTH (mm) - with side plugs
GUIDE RAIL 3700 3400 3100 2800 2500 2200 1900 1600 1300
TYPE A 1 2 2 3 3 4 5 6 6
TYPE B 1 2 2 3 3 4 5 6 6
SUITABLE GUIDE RAILS (PAGE 34- PAGE 72)

TO BE USED WITH STANDARD PVC GASKET/BRUSH (GG35NOR -SP35NOR)
TYPE A Standard system: GE26X21 - GE28X17 (for replacement) - Shutterbox UNIBOX : GE53X21 - GE53X21A - GE53X28R
TYPE B Standard system: GE35X21 - GE40X21 - Shutterbox UNIBOX: GE62X21
SUITABLE END SLATS (PAGE 30)
TE7X56 Extruded aluminum end slat 7,5x56mm

TE7X56U Extruded aluminum end slat inside/outside rolling 7,5x56mm
LIF4307 Extruded aluminum end slat 7,5x43mm
SUITABLE SECURITY ACCESSORIES (PAGE 45)

SEC40 Anti-lifting security system for roll tube 40mm
SE43I Handle lock, inside lock (only for TE7X56)
SE43E Lock with double key hole - inside and outside (only for TE7X56)
CA42AC Steel security latch (only for TE7X56)
COLOR RANGE
10 WHITE 11 RAL 9010 25 WHITE*

GROUP 1
07 GREY 15 IVORY 29 BEIGE 31 GREY 33 METALL. 34 BROWN 41 BEIGE 42 GREEN 47 CREAM 70 PEARL 81 GREY
RAL 1015 RAL 7038 RAL 6005 WHITE ANTH.
RAL 1013 RAL 7016
GROUP 2
38 WOOD 39 WOOD 44 BROWN 49 WOOD 59 BLACK 60 RED 67 BLUE 72 LIGHT 73 LIGHT 85 LIGHT 95 TRAF.
GRAIN GRAIN RAL 8019 GRAIN RAL 9005 RAL 3004 RAL 5015 GREY BLUE GREY GREY
LIGHT DARK CHERRY RAL 6019 VSR050 RAL 6021 RAL 7043
Standard end slat TE7X56

Available matching colors for end slats pages 32-33
* At clearance
A
R IS
ET T
UR
A L A N AT
P
FREE ODP FREON UNI EN 13659:2009
9
ALUMINUM PROFILE
TAP SECURITY WITH HIGH DENSITY
FOAM
TECHNICAL DATA
55
Max sizes: Max width 4,60m;

Max height: 3,00; Max. surface: 11,50sqm

13,3
ROLLING SHUTTERS
Assembled rolling shutter (punched)

with junctions to roll tube,
Variation: assembled
conic stoppers and side plugs
with nails
(TLSAR132C), standard aluminum end
slat TS12X55
ROLL DIAMETER
1000 1300 1600 1900 2200 2500 2800 3000 3300 3600 4000
ROLL TUBE 60MM 179 179 195 215 215 235 235 255 255 265 275
ROLL TUBE 70MM 175 175 195 199 215 225 235 240 255 265 275

1000 1300 1600 1900 2200 2500 2800 3000 3300 3500 4000
ROLL TUBE 60MM 179 189 215 215 235 235 255 255 265 275 285
ROLL TUBE 70MM 179 195 199 219 221 235 245 255 265 275 285

137 150 165 180 205 230 250 300

ROLL TUBE 60MM 700 1080 1900 2490 3200 4000
ROLL TUBE 70MM 3250 4000
10
GUIDE RAIL 4600 4300 4000 3700 3400 3100 2800 2500 2200 1900
TYPE C 1 1 2 2 3 3 4 4 5 6
TYPE D 1 1 2 2 3 3 4 4 5 6

TO BE USED WITH MAXI PVC GASKET/BRUSH (GG35MAG-SP35MAG)
TYPE C Standard system: GS28X117 (replacement)* GE30X27 - GE30X25 - GE30X19 (replacement)
TYPE D Standard system: GE40X27 - GE60X28 Shutterbox UNIBOX: GE62X28 - GE80X28 - GE458028
*to be used only with GG35NOR
TS12X55 Extruded aluminum end slat 12x55mm

TS12X55U Extruded aluminum end slat inside/outside rolling 12x55mm
GT PVC end slat gasket

SE43I Handle lock, inside lock (only for TS12X55)
SE43E Lock with double key hole - inside and outside (only for TS12X55)
CA42AC Steel security latch (only for TS12X55)
CA32F Reinforced steel security latch with lock handle
CAT-INT Intermediate security latch
COLOR RANGE
10 WHITE 11 RAL 9010 25 WHITE

GROUP 1
RAL 1015 RAL 7038 RAL 6005 WHITE ANTH.
RAL 1013 RAL 7016
GROUP 2
08 GREY 13 CREAM 16 BROWN 28 GREEN 30 OXIDE 38 WOOD 39 WOOD 44 BROWN 46 BRONZE 49 WOOD 53 WOOD 54 RENOLIT 55 WOOD 59 BLACK 61 RED
TELE4 RAL 9001 RAL 8017 RAL 6011 RED GRAIN GRAIN RAL 8019 GRAIN GRAIN DARK GRAIN RAL 9005 RAL 3005
RAL 7047 RAL 3009 LIGHT DARK CHERRY DOUGLAS MEDIUM
GROUP 2
64 GREY 65 GREY 67 BLUE 68 MINT 72 LIGHT 73 LIGHT 78 WOOD 79 WOOD 85 LIGHT 89 BROWN 91 GREY 92 GREEN 94 BROWN 95 TRAFFIC
66 OCHRE
RAL 7035 NCS 3000 RAL 5015 GREEN GREEN BLUE GRAIN GRAIN GREEN RAL 8003 RAFFAELLO RAFFAELLO RAFFAELLO GREY
RAL 6029 RAL 6019 VSR050 OAK WALNUT RAL 6021 RAL 7043
Standard end slat TS12X55

11
AR-28 ROLLING SHUTTERS
ALUMINUM PROFILE
ROLLITA WITH MEDIUM DENSITY
FOAM
TECHNICAL DATA
Max sizes: Max width:3,40lm
28
Max height: 2,50lm; Max surface: 4,50sqm
ROLLING SHUTTERS
Assembled rolling shutter (punched) with junction spring, conic stoppers and side plugs (TLAR/28),
standard aluminum end slat TE7x56
ROLL DIAMETER
1000 1300 1600 1900 2200 2500
ROLL TUBE 40MM 155 165 185 195 205 225
ROLL TUBE 60MM 159 179 199 205 225 225
ROLL TUBE 70MM 170 185 195 211 215 235

1000 1300 1600 1900 2200 2500
ROLL TUBE 40MM 165 179 199 205 225 225
ROLL TUBE 60MM 175 185 205 211 225 231
ROLL TUBE 70MM 175 191 211 215 235 241

137 150 165 180 205 230

ROLL TUBE 40MM 1000 1340 1480 1840 2430 2500
ROLL TUBE 60MM 810 950 1310 1480 2260 2500
12
ROLLING SHUTTERS AR-28
GUIDE RAIL 3400 3100 2800 2500 2200 1900 1600 1300
TYPE A 2 3 3 4 5 6 6 6
TYPE B 2 3 3 4 5 6 6 6



COLOR RANGE
10 WHITE 11 RAL 9010

GROUP 1
15 IVORY 29 BEIGE 31 GREY 33 METALL. 34 BROWN 42 GREEN 81 GREY

RAL 1015 RAL 7038 RAL 6005 ANTH.
RAL 7016
GROUP 2
38 WOOD 39 WOOD 44 BROWN 59 BLACK *85 LIGHT 95 TRAFFIC

GRAIN GRAIN RAL 8019 RAL 9005 GREEN GREY
LIGHT DARK RAL 6021 RAL 7043

* At clearance
A
R IS
ET T
UR
A L A N AT
P
13
ALUMINUM PROFILE
ROLLITA WITH MEDIUM DENSITY
FOAM
TECHNICAL DATA
37

Max height: 2,50lm; Max surface: 4,50sqm

8
ROLLING SHUTTERS
ROLL DIAMETER
1000 1300 1600 1900 2200 2500
ROLL TUBE 40MM 133 145 153 165 175 185
ROLL TUBE 60MM 137 155 165 181 181 191
ROLL TUBE 70MM 135 145 155 169 175 181

1000 1300 1600 1900 2200 2500
ROLL TUBE 40MM 140 150 165 165 180 190
ROLL TUBE 60MM 160 160 175 185 190 195

137 150 165 180 205 230

ROLL TUBE 40MM 1480 1810 2250 2500
ROLL TUBE 60MM 1110 1510 1990 2440 2500

14
GUIDE RAIL 3400 3100 2800 2500 2200 1900 1600 1300
TYPE A 1 1 2 3 3 4 5 6
TYPE B 1 1 2 3 4 5 5 6



COLOR RANGE
10 WHITE 11 RAL 9010

GROUP 1
15 IVORY 29 BEIGE 31 GREY 33 METALL. 34 BROWN 42 GREEN 81 GREY

RAL 1015 RAL 7038 RAL 6005 ANTH.
RAL 7016
GROUP 2
38 WOOD 39 WOOD 44 BROWN 59 BLACK 85 LIGHT 95 TRAFFIC

GRAIN GRAIN RAL 8019 RAL 9005 GREEN GREY
LIGHT DARK RAL 6021* RAL 7043

* At clearance
A
R IS
ET T
UR
A L A N AT
P
15
ALUMINUM PROFILE
ROLLITA WITH
MEDIUM DENSITY FOAM
TECHNICAL DATA
44
Max height: 3,00; Max surface: 8sqm

9
ROLLING SHUTTERS
ROLL DIAMETER
1000 1300 1600 1900 2200 2500 2800 3000
ROLL TUBE 40MM 135 150 165 180 185 199 205 219
ROLL TUBE 60MM 145 159 169 175 189 195 205 209
ROLL TUBE 70MM 155 169 169 185 191 199 215 215

1000 1300 1600 1900 2200 2500 2800 3000
ROLL TUBE 40MM 155 175 175 185 205 205 225 225
ROLL TUBE 60MM 165 171 185 195 205 221 225 229
ROLL TUBE 70MM 160 173 189 189 207 207 219 219

137 150 165 180 205

ROLL TUBE 40MM 1100 1450 1800 2240 3000
ROLL TUBE 60MM 830 1230 1710 2110 3000
16
GUIDE RAIL 3400 3100 2800 2500 2200 1900 1600 1300
TYPE A 1 1 2 3 4 5 6 6
TYPE B 1 2 3 4 4 5 6 6



COLOR RANGE
10 WHITE 11 RAL 9010 25 WHITE*

GROUP 1
RAL 1015 RAL 7038 RAL 6005 WHITE. ANTH.
RAL 1013 RAL 7016
GROUP 2
38 WOOD 39 WOOD 44 BROWN 49 WOOD 59 BLACK 60 RED 67 BLUE 72 LIGHT 73 LIGHT 85 LIGHT 95 TRAFFIC
GRAIN GRAIN RAL 8019 GRAIN RAL 9005 RAL 3004 RAL 5015 GREEN BLUE GREEN GREY
LIGHT DARK CHERRY RAL 6019 VSR050 RAL 6021 RAL 7043

* At clearance
A
R IS
ET T
UR
A L A N AT
P
17
ALUMINUM PROFILE
ROLLITA WITH
MEDIUM DENSITY FOAM
TECHNICAL DATA
55
Max sizes: Max width: 4,30lm

Max height: 3,50m Max surface: 10sqm

13,3
ROLLING SHUTTERS
standard aluminum end slat TS12X55
ROLL DIAMETER
1000 1300 1600 1900 2200 2500 2800 3000 3300 3500
ROLL TUBE 60MM 179 179 195 215 215 235 235 255 255 265
ROLL TUBE 70MM 175 175 195 199 215 225 235 239 255 265

1000 1300 1600 1900 2200 2500 2800 3000 3300 3500
ROLL TUBE 60MM 169 189 215 215 235 235 255 255 265 275
ROLL TUBE 70MM 179 195 199 219 221 235 245 255 265 275

137 150 165 180 205 230 250 300

ROLL TUBE 60MM 700 1080 1900 2490 3200 3500
18
GUIDE RAIL 4300 4000 3700 3400 3100 2800 2500 2200 1900
TYPE C 1 1 2 2 3 4 4 5 6
TYPE D 1 2 2 3 3 4 5 5 6

TYPE C Standard system: GS28X17 (replacement)* GE30X27 - GE30X25* - GE30X19 (replacement)


CAT-INT Intermediate security latch
COLOR RANGE
10 WHITE 11 RAL 9010 25 WHITE

GROUP 1
RAL 1015 RAL 7038 RAL 6005 WHITE. ANTH.
RAL 1013 RAL 7016
GROUP 2
08 GREY 13 CREAM 16 BROWN 28 GREEN 30 OXIDE 38 WOOD 39 WOOD 44 BROWN 46 BRONZE 49 WOOD 53 WOOD 54 RENOLIT 55 WOOD 59 BLACK 61 RED
TELE4 RAL 9001 RAL 8017 RAL 6011 RED GRAIN GRAIN RAL 8019 GRAIN GRAIN DARK GRAIN RAL 9005 RAL 3005
RAL 7047 RAL 3009 LIGHT DARK CHERRY DOUGLAS MEDIUM
GROUP 2
64 GREY 65 GREY 66 OCHRE 67 BLUE 68 MINT 72 LIGHT 73 LIGHT 78 WOOD 79 WOOD 85 LIGHT 95 TRAFFIC
89 BROWN 91 GREY 92 GREEN 94 BROWN
RAL 7035 NCS 3000 RAL 5015 GREEN GREEN BLUE GRAIN GRAIN GREEN GREY
RAL 8003 RAFFAELLO RAFFAELLO RAFFAELLO
RAL 6029 RAL 6019 VSR050 OAK WALNUT RAL 6021 RAL 7043

A
R IS
ET T
UR
A L A N AT
P
19
AC-55 ROLLING SHUTTERS
STEEL PROFILE WITH
TAP SECURITY MEDIUM DENSITY FOAM
TECHNICAL DATA
55
Max sizes: Max width; 4,50sqm

Max height: 3,00; Max Surface: 10sqm
13,3
ROLLING SHUTTERS
Assembled rolling shutter (punched) with aluminum profile for junction (PT45ALLL) , conic stoppers and
side plugs (TLAR/55), standard aluminum end slat TS12X55
ROLL DIAMETER
SHUTTER HEIGHT (mm) - with junction spring 5002 - PT45ALL
1000 1300 1600 1900 2200 2500 2800 3000 3300 3600 4000
ROLL TUBE 60MM 185 185 205 205 221 229 241 245 265 265 283
ROLL TUBE 70MM 165 180 203 203 221 227 245 249 255 275 275

1000 1300 1600 1900 2200 2500 2800 3000 3300 3500 4000
ROLL TUBE 60MM 183 201 209 225 243 243 261 265 265 285 285
ROLL TUBE 70MM 189 213 213 229 229 249 249 273 273 281 293

137 150 165 180 205 230 250 300

ROLL TUBE 60MM 990 1050 1540 2090 3080 4000
20
ROLLING SHUTTERS AC-55
GUIDE RAIL 4500 4300 4000 3700 3400 3100 2800 2500 2200 1900
TYPE C 2 2 3 3 4 5 5 6 6 6
TYPE D 3 3 3 3 4 5 6 6 6 6



COLOR RANGE
10 WHITE 16 BROWN RAL 7038 34 BROWN 42 GREEN 44 BROWN 64 GREY 66 OCHRE 68 MINT RAL 1013 89 BROWN
RAL 8017 RAL 6005 RAL 8019 RAL 7035 GREEN
RAL 6029
33 METALL.
38 WOOD 39 WOOD
GRAIN GRAIN
LIGHT DARK

A
R IS
ET T
UR
A L A N AT
P
21
ES-28 ROLLING SHUTTERS
TAP SECURITY EXTRUDED ALUMINUM
PROFILE
TECHNICAL DATA
28
Max sizes: Max width: 4,90lm
Max height: 3,50m Max surface: 10sqm
ROLLING SHUTTERS
Assembled rolling shutter (punched) with junction spring, conic stoppers and side plugs (TLES/28),
ROLL DIAMETER
1000 1300 1600 1900 2200 2500 2800 3000 3300 3500
ROLL TUBE 40MM 145 161 180 191 201 225 225 241 245 250
ROLL TUBE 60MM 159 175 180 199 215 219 235 241 245 259
ROLL TUBE 70MM 160 175 189 199 209 225 229 239 249 255

1000 1300 1600 1900 2200 2500 2800 3000 3300 3500
ROLL TUBE 40MM 155 179 179 200 220 220 240 240 240 259
ROLL TUBE 60MM 173 185 205 205 225 225 245 247 269 269
ROLL TUBE 70MM 179 199 199 219 235 239 245 259 259 279

137 150 165 180 205 230

ROLL TUBE 40MM 750 1230 1340 1480 1930 2630
ROLL TUBE 60MM 610 1090 1260 1340 1820 2350
22
ROLLING SHUTTERS ES-28
GUIDE RAIL 4900 4600 4300 4000 3700 3400 3100 2800 2500 2200 1900 1600 1300
TYPE A 1 2 2 3 3 3 4 5 6 6 6 6 6
TYPE B 1 2 2 3 3 4 5 6 6 6 6 6 6



COLOR RANGE
PAINTED
10 WHITE 11 RAL 9010 31 GREY 34 BROWN

RAL 7038

Further colors on request. Contact our office for delivery time and prices.
A
R IS
ET T
UR
A L A N AT
P
23
PROFILE
TECHNICAL DATA
44
Max sizes: Max width: 4lm
Max height: 3,50lm Max surface: 9,50sqm

9
ROLLING SHUTTERS
ROLL DIAMETER
1000 1300 1600 1900 2200 2500 2800 3000 3300 3500
ROLL TUBE 40MM 145 155 169 175 185 199 205 215 219 230
ROLL TUBE 60MM 145 165 165 185 201 201 215 215 235 235
ROLL TUBE 70MM 161 161 175 193 193 205 209 221 225 235

1000 1300 1600 1900 2200 2500 2800 3000 3300 3500
ROLL TUBE 40MM 159 175 179 189 195 205 225 225 225 235
ROLL TUBE 60MM 175 175 189 195 205 219 225 225 235 239
ROLL TUBE 70MM 165 189 189 200 215 215 229 229 239 239

137 150 165 180 205 230

ROLL TUBE 40MM 790 1140 1540 2020 2900 3500
ROLL TUBE 60MM 790 920 1270 1710 2680 3300
24
GUIDE RAIL 4000 3700 3400 3100 2800 2500 2200 1900 1600 1300
TYPE A 1 2 3 4 4 5 6 6 6 6
TYPE B 1 2 3 4 4 5 6 6 6 6



COLOR RANGE
PAINTED

RAL 7038

A
R IS
ET T
UR
A L A N AT
P
25
PROFILE
TECHNICAL DATA
55
Max sizes: Max width; 5,50lm

Max height: 5,00lm Max surface: 14sqm
13,3
ROLLING SHUTTERS
standard aluminum end slat TS12X55
ROLL DIAMETER
1000 1300 1600 1900 2200 2500 2800 3000 3300 3600 3900 4200 4500 5000
ROLL TUBE 60MM 175 179 195 211 215 235 235 245 255 265 270 275 295 299
ROLL TUBE 70MM 165 175 195 199 215 225 235 245 255 259 271 275 285 295

1000 1300 1600 1900 2200 2500 2800 3000 3300 3600 3900 4200 4500 5000
ROLL TUBE 60MM 165 185 205 205 229 229 249 249 255 269 269 295 295 315
ROLL TUBE 70MM 175 195 199 215 219 239 239 259 259 275 279 285 300 305

137 150 165 180 205 230 250 300

ROLL TUBE 60MM 930 1430 1810 2360 3080 4950
26
GUIDE RAIL 5500 5200 4900 4600 4300 4000 3700 3400 3100 2800 2500 2200 1900
TYPE C 1 1 1 2 2 3 3 4 5 5 6 6 6
TYPE D 1 1 2 3 3 4 4 4 5 5 6 6 6



COLOR RANGE
PAINTED

RAL 7038

A
R IS
ET T
UR
A L A N AT
P
27
PROFILE
TECHNICAL DATA
Profiles per sqm: 18
55
Max sizes: Max width; 5,50lm
Max height: 5,00lm Max surface: 14sqm
To be used with anti-noise gaskets GG35NOR and

GG12PVC
12,5
ROLLING SHUTTERS
Assembled rolling shutter (punched) with junction (PT45ALL), conic stoppers and side plugs
(TLSAR/115C), standard aluminum end slat TE12X55
ROLL DIAMETER
SHUTTER HEIGHT (mm) - with junction 5002 - PT45ALL
1000 1300 1600 1900 2200 2500 2800 3000 3300 3600 3900 4200 4500 5000
ROLL TUBE 60MM 175 195 215 225 245 245 265 269 269 295 295 395 325 325
ROLL TUBE 70MM 179 205 209 229 235 255 255 280 280 285 305 305 325 330

1000 1300 1600 1900 2200 2500 2800 3000 3300 3600 3900 4200 4500 5000
ROLL TUBE 60MM 180 205 215 235 235 259 265 275 279 285 305 305 309 335
ROLL TUBE 70MM 195 219 225 249 249 265 275 275 305 305 309 329 329 355

137 150 165 180 205 230 250 300

ROLL TUBE 60MM 770 1040 1480 2090 2640 4230
28
GUIDE RAIL 5500 5200 4900 4600 4300 4000 3700 3400 3100 2800 2500 2200 1900
TYPE C 1 1 2 3 3 3 3 4 5 5 6 6 6
TYPE D 1 2 2 3 3 4 4 4 5 5 6 6 6

TO BE USED WITH MAXI PVC GASKET/BRUSH (GG35SUP-SP35MAG)
TYPE C Standard system: GE30X27 - GE30X25* - GE30X19 (replacement)
*to be used with GG35MAG - SP35MAG
TE12X55 Extruded aluminum end slat 12x55mm

SE43I Handle lock, inside lock
SE43E Lock with double key hole - inside and outside
CA42AC Steel security latch
COLOR RANGE
PAINTED

RAL 7038
A
R IS
ET T
UR
A L A N AT
P
29
END SLATS ROLLING SHUTTERS
AND GASKETS EXTRUDED ALUMINUM END SLATS
TE7X56 DESCRIPTION STD PACK. U.M.
EXTRUDED ALUMINUM END

5 SLATS
55
SLAT 7,5X55 FOR PROFILES 7,5 LM
6,50 LM
AND 9MM, WEIGHT 377 G/LM
7.5
TE7X56U DESCRIPTION STD PACK. U.M.

SLAT 7,5X55
5 SLATS
INSIDE/OUTIDE ROLLING, LM
55
6,50 LM
FOR PROFILES 7,5 AND 9MM
WEIGHT 370 G/LM
7.5
LIF4307 DESCRIPTION STD PACK. U.M.

SLAT 43X7,5, OBLIGATORY FOR
5 SLATS
43
STRAP AND CRANK OPERATION LM

6,50 LM
SHUTTER WITH INSECT
SCREEN WEIGHT 301 G/LM
7.5
TS12X55 DESCRIPTION STD PACK. U.M.

SLAT 13X55MM FOR 5 SLATS
55
LM
PROFILES 12-14MM 6,50 LM
WEIGHT 512 G/LM
13
TS12X55U DESCRIPTION STD PACK. U.M.

SLAT 14X55
5 SLATS
55
INSIDE/OUTSIDE ROLLING, FOR LM

6,50 LM
PROFILES
12-14MM, WEIGHT 457 G/LM

SLAT 12X55MM 5 SLATS
55
LM
FOR PROFILE SAR-115 6,50 LM
WEIGHT 472 G/LM
12
30
ROLLING SHUTTERS END SLATS
GASKETS AND GASKETS
GT DESCRIPTION STD PACK. U.M.
PVC END SLAT GASKET FOR 5 SLATS

LM
PROFILES AR-32, SAR-132,AC-55 6,50 LM
GG35NOR DESCRIPTION STD PACK. U.M.
PVC GASKET FOR PROFILE SAR-115,

275 LM LM
1.2 END SLATS AND GUIDE RAILS
TE12X10P DESCRIPTION STD PACK. U.M.
PVC GASKET ROLL

LM
FOR END SLAT TE12X55 32,5 LM
31
COLOR ROLLING SHUTTERS
RANGE
END SLATS COLORS
PROFILES 55 MM PROFILES 37 MM AND 44 MM

STANDARD MATCHING AVAILABILITY STANDARD MATCHING AVAILABILITY
TS12X55 TS12X55U TE7X56 TE7X56U
10 WHITE 10 10 10 10
WHITE
11 RAL9010 11 11 11 11
25 WHITE 25
07 GREY 07 07
15 IVORY
RAL 1015
15 15 15 15
29 BEIGE 29 29
31 GREY
RAL 7038
31 31
33 METALLIZED 33 33
GROUP 1
34 BROWN 34 34 34 34
41 BEIGE 70 70
42 GREEN
RAL 6005
42 42
47 CREAM 15 15
70 PEARL WHITE
RAL 1013
70 70
81 GREY
RAL 7016
81 81 81 81
08 GREY TELE4
RAL 7047
08
13 CREAM
RAL 9001
13
16 BROWN
RAL 8017
16
28 GREEN
RAL 6011
28
GROUP 2
30 RED
RAL 3009
30
38 WOOD GRAIN
MEDIUM
89 89
39 WOOD GRAIN
DARK
16 16
44 BROWN
RAL 8019
44 44
46 BRONZE 44
32
ROLLING SHUTTERS COLOR
RANGE
END SLATS COLORS
PROFILES 55 MM PROFILES 37 MM AND 44 MM

COLOR MATCHING AVAILABILITY COLOR MATCHING AVAILABILITY
TS12X55 TS12X55U TE7X56 TE7X56U
33
SILVER
X X X X
49 WOOD GRAIN
CHERRY
89 89
53 WOOD GRAIN
DOUGLAS
89
54 DARK RENOLIT 16
55 WOOD GRAIN
MEDIUM
89
59 BLACK
RAL 9005
59 59
60 RED
RAL 3004
60*
61 RED
RAL 3005
61
63
GOLD
63 63
64 GREY
RAL 7035
64
65 GREY
NCS 3000
50
66 OCHRE 66
GROUP 2
67 BLUE
RAL 5015
67 67
68 GREEN MINT
RAL 6029
68
72 GREEN
RAL 6019
72 72
72 LIGHT BLUE
VSR050
73 73
78 LIGHT WOOD
GRAIN 89
OAK
79 WOOD GRAIN
WALNUT
16
85 PALE GREEN
RAL 6021
85 85
89 BROWN
RAL 8003
89
91 GREY
RAFFAELLO
91
92 GREEN
RAFFAELLO
92
94 BROWN
RAFFAELLO
94
95 GREY
TRAFFIC RAL 7043 95 95
*AT CLEARANCE.
33
ALUMINUM ROLLING SHUTTERS
GUIDE RAILS FOR PROFILES 7,5-9MM
13
GE26X21 DESCRIPTION STD PACK. U.M.
EXTRUDED ALUMINUM GUIDE RAIL
26X21MM WITH SEAT FOR ANTI-
20 SLATS
26
NOISE GASKET OR BRUSH LM
6,50LM
FOR PROFILES 7,5-9MM
WEIGHT 267 G/LM APPROX
21
13
20 SLATS
35

6,50LM
21
13
20 SLATS
40
6,50LM
21
14
28X16MM FOR REPLACEMENT WITH
20 SLATS
SEAT FOR ANTI-NOISE GASKET LM
28
6,50LM
OR BRUSH, FOR PROFILES
7,5-9MM WEIGHT 280 G/LM APPROX
16
FOR PROFILES 11-14MM
17
GS28X17 DESCRIPTION STD PACK. U.M.
28X17MM, FOR REPLACEMENT, WITH
SEAT FOR ANTI-NOISE GASKET 20 SLATS
28
LM
OR BRUSH, FOR PROFILES 6,50LM
11-12-14MM WEIGHT 240 G/LM
17 APPROX
ALL GUIDE RAILS CAN BE SUPPLIED WITH INSERTED PVC OR BRUSH GASKET, CUT TO MEASURE WITH HOLE 4MM AND PUNCHED FOR SECURITY LATCH.
34
ROLLING SHUTTERS ALUMINUM
GUIDE RAILS
18.8
30X19MM FOR REPLACEMENT,
WITH SEAT FOR ANTI-NOISE 20 SLATS
30
LM
GASKET OR BRUSH, FOR 6,50LM
PROFILES 11-12-14MM
19 WEIGHT 281 G/LM APPROX
19.5
20 SLATS
30

6,50LM
25
19.5
20 SLATS
30

6,50LM
27
19.5
20 SLATS
40

6,50LM
27
19

10 SLATS
6,50LM
60
FOR PROFILES 11-12-14MM

WEIGHT: 773 G/LM APPROX
28
ALL GUIDE RAILS CAN BE SUPPLIED WITH INSERTED PVC OR BRUSH GASKET, CUT TO MEASURE WITH HOLE 4MM AND PUNCHED FOR SECURITY LATCH.
35
ENTRY GUIDES
FOR GUIDE ROLLING SHUTTERS
RAILS
TR-TENYP DESCRIPTION STD PACK. U.M.
PAIR OF MINI ENTRY GUIDES

FOR GUIDE RAILS 40 PAIRS PAIR
GE26X21,GE35X21,GE40X21
TR-TENYG DESCRIPTION STD PACK. U.M.
PAIR OF MAXI ENTRY GUIDES

FOR GUIDE RAILS GE30X27, 40 PAIRS PAIR
GE40X27
COLOR
RANGE
DESCRIPTION STANDARD GUIDE

RAILS
10 WHITE
34 BROWN
COLORS
33 METALLIZED
63 RAL 1035 GOLD
70 RAL 1013 PEARL WHITE
36
PVC GASKETS
ROLLING SHUTTERS AND BRUSHES

275LM LM
1.2 END SLATS AND GUIDE RAILS
GG35MAG DESCRIPTION STD PACK. U.M.
MAXI PVC GASKET

FOR EXTRUDED ALUMINUM 275LM LM
1.8 GUIDE RAILS
GG35SUP DESCRIPTION STD PACK. U.M.
MAXI PVC GASKET

FOR EXTRUDED ALUMINUM GUIDE 275LM LM
3 RAILS AND FOR SAR-115
GG12PVC DESCRIPTION STD PACK. U.M.
PLASTIC GASKET FOR CAVITY

5 SLATS
OF PROFILE SAR-115 AND LM
6,50LM
FOR INTERMEDIATE SLAT TE12X55
SP35NOR DESCRIPTION STD PACK. U.M.
BRUSH GASKET
RAILS
SP35MAG DESCRIPTION STD PACK. U.M.
MAXI BRUSH GASKET

RAILS
37
SIZES ROLLING SHUTTERS
SURVEY STANDARD SYSTEM
PROJECTION FRAME
OPENING SIZE
SHUTTER WIDTH = OPENING WIDTH - 24 MM
SHUTTER HEIGHT = OPENING HEIGHT + 100 MM
12
No matter which guide is used, it is necessary to leave enough space for the projection frame and for the shutter sliding.
GUIDE RAILS IN OPENING SIZE

OPENING SIZE
SHUTTER WIDTH = OPENING WIDTH - 20 MM
10
No matter which guide is used, it is necessary to leave enough space for the shutter sliding.
GE26X21
OPENING SIZE
SHUTTER WIDTH = OPENING WIDTH + 32 MM
21
26 16 10
GE35X21
OPENING SIZE
21
35 25 10
GE30X25
OPENING SIZE
25
30 20 10
GE30X27
OPENING SIZE
27
30 20 10
38
ROLLING SHUTTERS SIZES
SURVEY
GE40X21
OPENING SIZE
21
40 30 10
GE40X27
OPENING SIZE
27
40 30 10
GE60X28
OPENING SIZE
28
60 48 12
GE28X17 OPENING SIZE

GS28X17 28
17
12 5 2
OPENING SIZE
GE30X19
30
19
13 12
39
SIDE ROLLING SHUTTERS
PLUGS
TLSAR-132C DESCRIPTION STD PACK. U.M.
PVC SIDE PLUG WITH SCREWS

500 PACK.
FOR PROFILE SAR-132
TLSAR-132PC DESCRIPTION STD PACK. U.M.
FLAT PVC SIDE PLUG WITH SCREWS,

500 PACK.
FOR PROFILE SAR-132
FLAT PVC SIDE PLUG WITH SCREWS,

500 PACK.
FOR PROFILE SAR-117
PVC SIDE PLUG WITH SCREWS

500 PACK.
AND INSERT FOR PROFILE SAR-115
TLES-55 DESCRIPTION STD PACK. U.M.
PVC SIDE PLUG FOR PROFILE ES-55 500 PACK.
40
ROLLING SHUTTERS SIDE
PLUGS
DESCRIPTION STD PACK. U.M.
PVC SIDE PLUG FOR PROFILES

TLAR-28 - AR-28 1000 PACK.
TLAR-17 - AR-17; 1000
TLAR-55 - AR-32;AC-55; 1000
TLAR-37 - AR-37; 500pairs
INS-AT DESCRIPTION STD PACK. U.M.

ANTI-STORM INSERT
FOR PROFILES SAR-115 AND ES-55
TO APPLY ON SIDE PLUGS
TLSAR115C 500 PACK.
The anti-storm insert increases

the roll diameter
TC40 DESCRIPTION STD PACK. U.M.
PLASTIC CONIC STOPPER

WITH SCREWS
40 100 PACK.
(COLORS 25-31-34-42-46)
EM4080E DESCRIPTION STD PACK. U.M.
ADJUSTABLE SIDE PLUG

100 PACK.
FOR END SLAT LIF4307
41
STAPLER AND ROLLING SHUTTERS
STAPLES
P70PNE DESCRIPTION STD PACK. U.M.
PNEUMATIC STAPLER 1 PACK.
PM703 DESCRIPTION STD PACK. U.M.
METALLIC STAPLES H408

FOR P70PNE, FOR PROFILES AR-28, 28.000 PACK.
AR-32, AR-77

FOR P70PNE 25.000 PACK.
FOR PROFILE AC-55

4.5

FOR P70PNE FOR PROFILES AR-17, 25.000 PACK.
AR-37
4
JUNCTION
STRAP
PT45ALL DESCRIPTION STD PACK. U.M.
EXTRUDED ALUMINUM PROFILE

FOR JUNCTION STRAP 2 SLATS
LM
FOR PROFILES AC-55 AND SAR-115, 3,00LM
17
PUNCHED SLATS
5101 DESCRIPTION STD PACK. U.M.

JUNCTION STRAP
FOR ROLL TUBE WITH ALU PROFILE
AND STRAP 100 PACK.
FOR PROFILES AR-37,
AR-17, SAR-117, ES-44
14
42
ROLLING SHUTTERS JUNCTION
STRAP
JUNCTION STRAP
FOR ROLL TUBE WITH ALU PROFILE
FOR PROFILES 100 PACK.
AR-28, AR-32, SAR-132
ES-55, ES-28
17
CINY1 DESCRIPTION STD PACK. U.M.

19
NYLON STRAP - 1 HOLE - 45CM

50 PACK.
FOR ALUMINUM PROFILES
CI71RT DESCRIPTION STD PACK. U.M.

22
COTTON-NYLON STRAP 50ML PACK.
SECURITY SPRING L=100MM

FOR PROFILES 100 PACK.
AR-37, AR-17, SAR-117, ES-44
SECURITY SPRING L=195MM

FOR PROFILES
100 PACK.
AR-28, AR-32, SAR-132
ES-28, ES-55
GALVANIZED HOOK - CONNECTING

100 PACK.
THE STRAP TO THE ROLL TUBE
43
JUNCTIONS ROLLING SHUTTERS
TO ROLL TUBE
JUNCTION PROFILES
SAR-117, ES-44, AR-37

5001 AR-17
mm
500
AR-28, SAR-132, ES-28

5002 AR-32, ES-55
JUNCTION PROFILES
SAR-117, ES-44, AR-37

5101 AR-17
mm
500
SAR-132, AR-28, AR-32

5102 ES-55, ES-28
JUNCTION PROFILES
mm
500
500 mm PT45ALL + CINY1 EVERY 50CM AC-55, SAR-115
44
ROLLING SHUTTERS SECURITY
ACCESSORIES
SE43I DESCRIPTION STD PACK. U.M.
HANDLE LOCK, INSIDE LOCK WITH

2LM STEEL BAR 10 PACK.
only for standard end slat
(not inside/outside rolling)
SE43E DESCRIPTION STD PACK. U.M.

LOCK WITH DOUBLE KEY HOLE -
INSIDE AND OUTSIDE WITH 2,00LM
STEEL BAR 10 PACK.
only for standard end slat
(not inside/outside rolling)
CA42AC DESCRIPTION STD PACK. U.M.

13
STEEL SECURITY LATCH
ONLY FOR STANDARD END SLAT 100 PACK.
(NOT INSIDE/OUTSIDE ROLLING)
CA42ACM100 DESCRIPTION STD PACK. U.M.

100
STEEL SECURITY LATCH
CUT TO 100CM
10 PACK.
ONLY FOR STANDARD END SLAT
(NOT INSIDE/OUTSIDE ROLLING)
CA32F DESCRIPTION STD PACK. U.M.

12
REINFORCED STEEL SECURITY
LATCH WITH LOCK HANDLE
10 PACK.
FOR END SLAT TS12X55
AND TS12X55U
CAT-INT DESCRIPTION STD PACK. U.M.
INTERMEDIATE SECURITY LATCH

100 PACK.
SAR-132, AC-55
18
45
ANTI-LIFTING
SECURITY ROLLING SHUTTERS
ACCESSORIES
SEC40 DESCRIPTION STD PACK. U.M.
ANTI-LIFTING
SECURITY SYSTEM FOR ROLL TUBE
25 PC
40MM, MINI PROFILES
7,5-9 MM
ANTI-LIFTING
SECURITY SYSTEM FOR ROLL TUBE 25 PC
60MM
ANTI-LIFTING
SECURITY SYSTEM FOR ROLL TUBE 25 PC
70MM
46
ROLLING SHUTTERS ANTI-LIFTING
JUNCTIONS
TYPES OF JUNCTIONS
SEC40: PROFILES 7,5-9MM ROLL TUBE 40MM
150 MAX 500 150
HOW TO CHOOSE THE SECURITY SYSTEM:
THE SECURITY SYSTEM TYPE IS CHOSEN ACCORDING TO THE ROLL TUBE DIAMETER (40MM - 60MM - 70MM).
A SINGLE CENTRAL PART (B) WITH SERVERAL MESHES BLOCKABLE BY A MOBILE PIN (C) INTO THE MESH LEANING ON THE ROLL TUBE (F)
HOW TO PLACE SECURITY SYSTEM
EXTERNAL UNITS: 150 MM FROM GUIDE RAIL

INTERMEDIATE UNITS: MAX 500 MM
SHUTTER CLOSE TO THE ROLL TUBE SHUTTER FAR AWAY FROM THE ROLL TUBE LEGENDA
A A
A RINGS FOR ROLL TUBE 40-60-70MM
B CENTRAL PART
F F
C MOBILE PIN
D ELASTIC RING
C C E SCREW
F MESH LEANING ON ROLL TUBE
G G G FREE MESH
H RING HOLES
B B
E E
H
47
LUX
LUX
SERIE
Serie
48
AriaLUX
®
THE VENTED ROLLING SHUTTER

MORE AIR AND LIGHT
VisioLUX
®
THE MICRO ROLLING SHUTTER

TRANSPARENCY AND VISIBILITY
SecurLUX
®
THE SAFER ROLLING SHUTTER

MORE SAFETY AND COMFORT
ThermoLUX
®
THE SMART ROLLING SHUTTER

ENERGY EFFICIENCY AND COMFORT
AxioLUX
®
THE TILTING SHUTTER

SUN CONTROL AND SAFETY
49
LUX
LUX
SERIE ®
Aria EXTRUDED ALUMINUM
THE SHUTTER ARIALUX IN FULL LOWER POSITION WITH OPEN SLOTS ALLOWS
MORE SUNLIGHT AND AIR RECYCLING.
ARIALUX is a shutter with an innovative Design that differently from common shutters brings remarkable natural
light and ventilation thanks to innovative longer slots. Keeping rooms well-illuminated and ventilated is an essential
requisite for a healthy living and to protect your home from mould and microorganisms.*
Modern life-rhythms in combination with the need of safety often prevent sufficient ventilation through open
windows during the daytime.
ARIALUX thanks to its special slotted profiles allows an adequate air recycling even with the shutter in full lower
position.
* Green Building Council UK “ Health and Wellbeing in Homes” London, Sept 2017.
50
TRADITIONAL
SHUTTER ARIALUX
slot: 20x1,5 mm slot: 240x13 mm
Air permeability (sqm): 0,013 sqm about Air permeability (sqm): 0,17 sqm
13 TIME MORE VENTILATION AND NATURAL LIGHTING THAN A TRADITIONAL

ROLLING SHUTTER
GUIDE RAILS BOTTOM PROFILE SLATS CONNECTOR
19 15
28
30
50
46
34
27 17
11
N.B. ARIALUX can be installed with traditional
guide rails (also for replacement) using the
suitable gasket
7,5 11 8
TECHNICAL SPECIFICATIONS
Width: max recommended 3000 mm Weight/sqm 9,2 kg
Height: max recommended 3000 mm 17 slats/m
ROLLING DIAMETER
HEIGHT (mm)
1000 1300 1600 1900 2200 2500 2800 3000
Roll Ø70* 170 190 205 205 225 230 250 250
*The using of 60 mm roll tube after technical approval only.
STOCK COLORS ALUMINIUM PROFILES
UNI EN 13659
RAL 9010 RAL 1013 RAL 6005 RAL 8017 RAL 7016 RAL 7035 RAL 9006
g-tot*: 0,02 g-tot*: 0,02 g-tot*: 0,07 g-tot*: 0,08 g-tot*: 0,07 g-tot*: 0,04 g-tot*: 0,04
* EN 14501- glass type C-external shading device Further colors can be available upon request.
51
LUX
LUX
SERIE ®
Visio EXTRUDED ALUMINUM
VISIOLUX SHUTTER ALLOWS NATURAL VENTILATION AND A HIGH VISIBILITY

THROUGH THE SLATS STILL GRANTING PRIVACY.
VISIOLUX is available in two versions: with internal or external winding.

The special asymmetrical design of the slats allows to reduce the visual obstruction towards the exterior, granting
an optimal level of contact with the external environment still avoiding to be seen from outside.
VISIOLUX rolling shutter is a terrific mix combination of design, technology and performance. It is one-of-a-kind and
it will provide privacy, by increasing the visibility to the outside and reducing it towards the inside.
VISIOLUX with closed slats provides complete black out (darkening). With open slats regulates the natural light to
allow high living comfort and intimacy levels.
52
INTERNAL WINDING EXTERNAL WINDING
VISIOLUX VERSION 1 VISIOLUX VERSION 2
GUIDE RAILS BOTTOM PROFILE SLATS
30
10
23
9,7 8,5
27
18
version 1
9
17
Adapter Guide
N.B. Standard guide rails for VISIOLUX system with
10
pvc internal adapter profile guarantee high level of
23
quietness.
8,5
Check the matching adapter profile if using different
kind of guide rails. version 2
9
RESISTANCE CLASS 5 up to maximum recommended width.

ROLLING DIAMETER
HEIGHT (mm)
1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 3200 3400 3600 3800 4000
Roll Ø 60 155 170 175 190 195 205 220 225 235 240 245 250 255 265 270 275
UNI EN 13659
53
LUX
LUX
SERIE ®
Secur EXTRUDED ALUMINUM
THE SECURITY SHUTTER SECURLUX MADE OF EXTRUDED ALUMINUM WITH A

MODERN DESIGN AND EASY TO INSTALL.
SECURLUX means three functions in one: + safety + sunlight and fresh air.
Thanks to the larger gap between the slats, securlux improves natural lighting and air recycling in the rooms
without needing to raise the shutter completely, making your privacy and security safer.
SECURLUX does not need masonry installation works, so it is ideal for renovations.
54
2 cm
AIR GAP IN GRILLE

POSITION: 2 cm
GUIDE RAILS PROFILES

14
19 15
28
30
51
27 17
N.B. SECURLUX can be installed with traditional

guide rails (also for replacement) using the
suitable gasket
Slat = botton profile
Width: max recommended 2300 mm Weight/sqm 19 kg
ROLLING DIAMETER
HEIGHT (mm)
800 1000 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 2500
Roll Ø 70* 220 220 230 230 230 240 240 250 250 255 255 260 265 265 265 270
*The using of 60 mm roll tube after technical approval only.
UNI EN 13659
55
LUX
LUX
SERIE ®
Thermo EXTRUDED ALUMINUM
THERMOLUX IS A NEW GENERATION SHUTTER THAT COMBINES WITH ELEGANCE ENERGY

SAVING AND SECURITY.
The external part in extruded aluminium provides a high security level against intrusions, while the inner part in
PVC (white color) provides high thermal insulation.
The high quality of the materials used grants the product durability.
THERMOLUX shutter has been tested in laboratory to measure the additional thermal resistance1 and the level of
resistance to break-in attempts.2
1
UNI EN ISO 10077-1:2007 THERMAL TRANSMITTANCE 2
UNI EN 1629:2016 RESISTANCE UNDER DYNAMIC LOADING
2
UNI EN 1627:2011 BURGLAR RESISTANCE 2
UNI EN 1630:2016 RESISTANCE TO MANUAL BURGLARY ATTEMPTS
2
UNI EN 1628:2016 RESISTANCE UNDER STATIC LOADING
56
PVC available color: white
The inner part, in PVC, reduces

The extruded aluminum exterior shell thermal transmittance.
guarantees a high rate of security ΔR = 0,119 (m2·K)/W
against intrusions.
GUIDE RAILS BOTTOM PROFILE PROFILES

13
14
35
28
7
50
40
21 16
N.B. THERMOLUX can be installed with traditional

guide rails (also for replacement) using the 10
suitable gasket 7,5
Width: max recommended 2500 mm Weight/sqm 7 kg
ROLLING DIAMETER
HEIGHT (mm)
1200 1400 1600 1800 2000 2200 2400 2600
Roll Ø 60 145 155 160 170 180 185 190 195
UNI EN 13659
57
LUX
LUX
SERIE ®
Axio EXTERNAL WINDING
AXIOLUX IS A ROLLING SHUTTER WITH TILTING SLATS FOR AN OPTIMAL SUN

CONTROL, DARKENING, INSULATION AND ANTI-INTRUSION SECURITY
AXIOLUX is composed of fixed and tilting slats.
Fixed slats are placed on the upper and lower sectors of the shutter to grant rigidity. The tilting slats, while descen-
ding, are open and gradually close at the end-stop.
AXIOLUX Design is minimal and it has been conceived to grant durability by assuring resistance and safety.
AXIOLUX with the slats open, allows natural ventilation in the house and the integrated version, in combination with
an insect screen, adds protection against insects.
AXIOLUX provides an important contribution to both managing the passive heat gains and the home security.
58
WINTER
DAY TIME: NIGHT TIME:
Completely rolled up With closed slats AXIOLUX
AXIOLUX contributes to protects the room and
energy saving by allowing contributes to increase
the solar heat to enter thermal insulation of the
the windows and heat window. EN 10077-1
up the room.
SUMMER
With closed slats With tilted slats AXIOLUX

AXIOLUX insulates from keeps safety allowing
heat while with tilted slats, good natural ventilation.
reduces passive solar When installed with an
heat gains (g-tot), by integrated insect screen
creating natural ventilation it combines natural
through the slats. ventilation and insect
protection.
GUIDING PROFILES BOTTOM PROFILE SLATS

19 31
19
58,5
41
62
27
40
8
53,5
27 27 16
Attention: AXIOLUX could be installed in traditional side 26°

guide rails and with external shutterboxes.
(min.width 13 mm, max depth 35 mm) CLOSED TILTED
ROLLING DIAMETER
HEIGHT (mm)
1200 1500 1800 2000 2500 3000
Roll Ø 60 165 180 200 200 220 240
EN 13659
RAL 9010 RAL 1015 RAL 7038 RAL 8019 RAL 7016
g-tot*: 0,02 g-tot*: 0,03 g-tot*: 0,04 g-tot*: 0,08 g-tot*: 0,07
g-tot* 45°: 0,10 g-tot* 45°: 0,10 g-tot* 45°: 0,10 g-tot* 45°: 0,09 g-tot* 45°: 0,09
59
GIRASOLE.2
GIRASOLE.2
60
GIRASOLE.2 The adjustable shutter with mosquito net.
The shutter, thanks to its adjustable slats, becomes a sunscreen that allows us to regulate the flow of light
and air.
Easy to install, to use and to mantain, this product is the most adaptable for any requirement.
61
GIRASOLE.2
THE ADJUSTABLE SHUTTER
SHUTTER
TECHNICAL DATA
Max width: 3000 mm
Max height: 3000 mm
Weight per sqm 9,2 kg
SUNSCREEN
MOSQUITO NET
STANDARD RAL
NYLON ACCESSORIES
ALUMINUM
WHITE 9010 IVORY 1013 BROWN 8017 GREEN 9006 GREY 7001
BLACK WHITE IVORY GREY
ROUGH ROUGH ROUGH ROUGH ROUGH
WOOD
LIGHT DARK LIGHT MEDIUM DARK

GREEN
RENOLIT RENOLIT BROWN BROWN BROWN
The company plans to add further colors on request. For updates: zanzar.it /colori/service
62
GIRASOLE.2
HORIZONTAL SECTION
GUIDE RAIL DEPTH

WIDTH
GUIDE RAIL OPENING SIZE HOW TO ORDER
19 Sizes should be indicated in mm. width x height
possibly in the guide rail opening size (fig.1) (fig.
5)
The guide rail depth must be indicated and
included between a minumum of 20 mm and a
maximum of 30mm
NOTE: Sizes invoiced will be the finished
Fig. 1
ones:approx. 20% more than the opening sizes
(when the shuter turns into a sunscreen, the
slats will fit into the slot, each one for approx.
GUIDE RAIL DEPTH 8mm; like in figure 6-7).
19
ATTENTION
Make sure that the internal width of the guide
rail is minimum 19mm.
WIDTH The shutterbox having 150 mm centre
OPENING SIZE distance will considered to be standard; higher
centre distances must be specified in the
Fig. 2 order.
GUIDE RAIL DEPTH

STANDARD GUIDE RAIL
27
WIDTH
19 SHUTTER FINISHED SIZE 19
31
Fig. 3
22
GUIDE RAIL DEPTH
19
WIDTH
MAX OVERALL DIMENSIONS
Fig. 4
63
GIRASOLE.2
INTERNAL ROLLING EXTERNAL ROLLING
ROLL ENCUMBRANCE
ROLL ENCUMBRANCE
BOX HEIGHT
BOX HEIGHT
OPENING SIZE
OPENING SIZE
Fig. 5
VERTICAL SECTION
SLATS OPEN SLATS CLOSED

GUIDE RAIL EDGE 11.7
37
The chart indicates the maximum encumbrance
of the shutter completely rolled on the basis of the
finished height size.
63.5
ROLL TUBE ENCUMBRANCE

55
HEIGHT (mm) Encumbrance

Opening size with Ø 60 roll tube
1600 175
1800 185
2000 200
2200 205
2400 220
2600 225
2800 240
3000 250
55
Minimum order 1,50 sqm.

24
Fig. 6 Fig. 7
64
INTERMEDIATE SUPPORT
WIDTH BELOW 1000 MM WITHOUT SUPPORT

WIDTH FROM 1001 TO 2000 MM WIDTH FROM 2001 TO 3000 MM
SLAT WITH ONE INTERMEDIATE SLAT WITH 2 INTERMEDIATE

SUPPORT SUPPORTS
65
SHUTTERBOX SHUTTERBOX
SHUTTERBOX
The demand for security, privacy or room darkening; together with new needs of energy saving and acoustic
protection lead consumers to close and protect even those places where rolling shutters (or other types of locking
systems) were not planned.
SHUTTERBOX
CROCI SOLUTION: UNIBOX

Shutterbox which allows the installation of security rolling shutters with an external application in the window
opening. It is perfect for houses with verandas and glass doors. Moreover, its usa has been successful in
businesses like seaside resorts, stalls and shopping mall windows.
Pre-painted aluminum UNIBOX shutterbox is available in two models (round and 45degrees) and in different sizes
to minimize the obstruction according to the rolling diameter of the rolling shutter that it will contain.
SHUTTERBOX
MINI-SHUTTERBOX
PROFILES
UNIBOX
CA45-137 DESCRIPTION STD PACK. U.M.
CA45-150 5 SLATS
CA45-165 45° SHUTTERBOX 6,50LM
CA45-180 IN 2 ALUMINUM PARTS
LM
DIM. 137, 150, 165, 180, 205 *3 SLATS
CA45-205* AND 230MM 6,50LM
CA45-230*
U-CARD-137 DESCRIPTION STD PACK. U.M.

U-CARD-150 5 SLATS
U-CARD-165 ROUND SHUTTERBOX IN 2 6,50LM
U-CARD-180 ALUMINUM PARTS
LM
DIM. 137, 150, 165, 180, 205 *3 SLATS
U-CARD-205*
AND 230MM 6,50LM
U-CARD-230*
Z-CA45-165 DESCRIPTION STD PACK. U.M.

Z-CA45-180 5 SLATS
Z-CA45-205* 45° SHUTTERBOX 6,50LM
Z-CA45-230* IN 2 ALUMINUM PARTS
LM
DIM. 165,180, 205 AND 230MM *3 SLATS
FOR INSECT SCREEN 6,50LM
Z-U-CARD-165 DESCRIPTION STD PACK. U.M.

Z-U-CARD-180 5 SLATS
Z-U-CARD-205 ROUND SHUTTERBOX IN 2 6,50LM
Z-U-CARD-230 ALUMINUM PARTS
LM
DIM. 165,180, 205 AND 230MM *3 SLATS
FOR INSECT SCREEN 6,50LM
MAXI-SHUTTERBOX
UNIBOX
CA45-300
45° SHUTTERBOX 3 SLATS
IN 2 ALUMINUM PARTS 6,50LM LM
DIM. 250 AND 300MM

U-CARD-300
ROUND SHUTTERBOX IN 2 3 SLATS
ALUMINUM PARTS 6,50LM LM
DIM. 250 AND 300MM
68
SHUTTERBOX
SIDE FRAMES
AND ACCESSORIES FOR
MINI-SHUTTERBOX
PROFILES UNIBOX
U-FI137-45 DESCRIPTION STD PACK. U.M.

U-FI150-45 45° ALUMINUM SIDE FRAME
U-FI165-45 FOR MINI-SHUTTERBOX 20 PAIRS
U-FI180-45 PAIR
U-FI205-45* DIM. 137, 150, 165, 180, 205 *10 PAIRS
AND 230MM
U-FI230-45*
U-FI137-RD DESCRIPTION STD PACK. U.M.

U-FI150-RD ROUND ALUMINUM SIDE FRAME
U-FI165-RD FOR MINI-SHUTTERBOX 20 PAIRS
U-FI180-RD PAIR
U-FI205-RD* DIM. 137, 150, 165, 180, 205 *10 PAIRS
AND 230MM
U-FI230-RD*
U-BAY DESCRIPTION STD PACK. U.M.
GALVANIZED BAYONET16X3MM FOR

SIDE FRAMES 137, 150, 165, 180, 205 10 PAIRS PAIR
AND 230MM.

NYLON ENTRY GUIDE
FOR SIDE FRAMES 137, 150, 165,
180, 205 AND 230MM 10 PAIRS PAIR
U-TENYP FOR PROFILES 7,5-9MM
U-TENYG
U-SPL01 DESCRIPTION STD PACK. U.M.
FILLING SPACES
FOR 45 ° SIDE FRAMES 137, 150, 165 40 PC
AND 180
U-FB137-40 DESCRIPTION STD PACK. U.M.

U-FB150-60 LATERAL GALVANIZED SAFETY
U-FB165-60 PLATE, SUITABLE FOR SIDE FRAMES
U-FB180-60 45° AND ROUND, ROLL TUBE 40-
10 PAIRS PAIR
U-FB205-60 60MM DIM. 137 (ONLY ROLL TUBE
40MM), 150, 165, 180, 205 AND
U-FB230-60 230MM
U-SUP01 DESCRIPTION STD PACK. U.M.
GALVANIZED ACCESSORIES PLATE

10 PC
FOR CRANK
69
SIDE FRAMES
AND ACCESSORIES FOR
MAXI-SHUTTERBOX
SHUTTERBOX
UNIBOX
U-FI300-45
45° ALUMINUM SIDE FRAME
FOR MAXI-SHUTTERBOX
5 PAIRS PAIR
DIM. 250 AND 300MM

U-FI300-RD
ROUND ALUMINUM SIDE FRAME
FOR MAXI-SHUTTERBOX
5 PAIRS PAIR
DIM. 250 AND 300MM
U-BAY2 DESCRIPTION STD PACK. U.M.
GALVANIZED BAYONET 20X4MM

5 PAIRS PAIR
FOR SIDE FRAMES 250 AND 300MM
U-TENYG2 DESCRIPTION STD PACK. U.M.
NYLON ENTRY GUIDE

FOR SIDE FRAMES 250 AND 300MM 5 PAIRS PAIR
U-FB250-60 DESCRIPTION STD PACK. U.M.
45° AND ROUNDED LATERAL

GALVANIZED SAFETY PLATE,
SUITABLE FOR SIDE FRAMES 250MM 5 PAIRS PAIR
FOR ROLL TUBE 60-70MM
70
SHUTTERBOX APPLICATIONS
APPLICATION NR. 1 APPLICATION NR. 2

SHUTTERBOX IN OPENING WIDTH AND HEIGHT SHUTTERBOX IN OPENING WIDTH AND HEIGHT
WITH INTERNAL ROLLING (NORMAL) WITH EXTERNAL ROLLING (INVERSION)
opening
larghezza opening
larghezza
width
luce width
luce
INTERNO
INTERIOR larghezza
INTERNO
INTERIOR
opening opening
altezza
height
altezza
height
luce
luce luce
INTERNO
altezza
luce
ESTERNO
EXTERIOR ESTERNO
EXTERIOR
ESTERNO
EXTERIOR INTERNO
INTERIOR ESTERNO
EXTERIOR INTERNO
INTERIOR
TAPE GUIDE AND JOINT MOUNTED IN LOWER PART ESTERNO

ESTERNO INTERNO
FINISHED SIZES FINISHED SIZES

SHUTTERBOX PROFILE ROLLING SHUTTER WITH SHUTTERBOX PROFILE ROLLING SHUTTER WITH
SIDE PLUGS SIDE PLUGS
MINI* L=OPEN. WIDTH - MINI* L=OPEN. WIDTH - MINI* L=OPEN. WIDTH - MINI* L=OPEN. WIDTH -
0,7CM 6,6CM 0,7CM 6,6CM
MAXI* L=OPEN WIDTH - MAXI* L= OPEN. WIDTH MAXI* L=OPEN WIDTH - MAXI* L= OPEN. WIDTH
0,9CM -8,4CM 0,9CM -8,4CM
APPLICATION NR. 3 APPLICATION NR. 5

SHUTTERBOX IN OPENING WIDTH AND HEIGHT OUT SHUTTERBOX OUT OF OPENING WIDTH AND
OF OPENING SIZE WITH EXTERNAL ROLLING (INVERSION) HEIGHT WITH EXTERNAL ROLLING (INVERSION)
opening
larghezza opening
larghezza
width
luce width
luce
opening INTERNO
INTERIOR opening INTERNO
INTERIOR
altezza altezza
height height
luce luce
ESTERNO
EXTERIOR ESTERNO
EXTERIOR
ESTERNO
EXTERIOR INTERNO
INTERIOR ESTERNO
EXTERIOR INTERNO
INTERIOR
FINISHED SIZES FINISHED SIZES

SHUTTERBOX PROFILE ROLLING SHUTTER WITH SHUTTERBOX PROFILE ROLLING SHUTTER WITH
SIDE PLUGS SIDE PLUGS
MINI* L=OPEN. WIDTH - MINI* L=OPEN. WIDTH - MINI MINI
0,7CM 6,6CM
GE53X21: W = OPEN. W. + 10,1CM GE53X21: W = OPEN. W. +4,2 CM
MAXI* L=OPEN WIDTH - MAXI* L= OPEN. WIDTH
0,9CM -8,4CM GE62X21: W = OPEN W. + 11,9 CM GE62X21: W = OPEN W. + 6 CM
GE62X28: W = OPEN W. + 11,9 CM GE62X28: W = OPEN W. + 6 CM

To calculate finished sizes we consider a gap of 2mm
GE80X28: W. = OPEN W. +15,5 CM GE80X28: W. = OPEN W. + 9,4 CM
only for “L” guide rails MAXI MAXI

GE458028: W = OPEN. W. + 15,3 CM GE458028: W = OPEN. W. + 7,6 CM
71
GUIDE RAILS SHUTTERBOX
MINI-SHUTTERBOX
13

EXTRUDED ALUM. GUIDE RAIL
53
10 SLATS
NOISE GASKET OR BRUSH FOR LM
6,50LM
PROFILES 7,5-9MM
21
13
GE53X21A
53X21MM WITH "L" WITH SEAT FOR
53
10 SLATS
ANTI-NOISE GASKET OR BRUSH FOR LM
6,50LM
PROFILES
7,5-9MM WEIGHT 569 G/LM APPROX.
55
13
GE53X28R DESCRIPTION STD PACK. U.M.

EXTRUDED ALUM. ROUNDED GUIDE
RAIL 53X28MM WITH SEAT FOR
10 SLATS
53
ANTI-NOISE GASKET OR BRUSH, LM

6,50LM
FOR PROFILES 7,5-9MM WEIGHT 541
G/LM APPROX.
28
13
EXTRUDED ALUM. RAIL 62X21MM

WITH SEAT FOR ANTI-NOISE GASKET 10 SLATS
62
LM
OR BRUSH FOR PROFILES 7,5-9MM 6,50LM
WEIGHT 598 G/LM APPROX.
21
19
10 SLATS
62

6,50LM
28
19
GUIDE RAIL 80X28MM
WITH SEAT FOR ANTI-NOISE GASKET
5 SLATS
OR BRUSH LM
6,50LM
WEIGHT 1164 G/LM APPOX
28
ALL GUIDE RAILS CAN BE SUPPLIED WITH INSERTED PVC GASKET OR BRUSH.
72
SHUTTERBOX GUIDE RAILS
MINI-SHUTTERBOX
19
GG57X28 DESCRIPTION STD PACK. U.M.
57
5 SLATS
NOISE GASKET OR BRUSH, FOR LM
6,50LM
GIRASOLE AND AXIOLUX, WEIGHT
28 675 G/LM APPROX.

EXTRUDED SLUM. GUIDE RAIL
FOR INSECT SCREEN AND ROLLING
5 SLATS
65
SHUTTER 65X42MM LM
6,50LM
PROFILES 7,5-9MM, WEIGHT 917
G/LM APPROX.
42
GUIDE RAILS
MAXI-SHUTTERBOX
19
GE458028 DESCRIPTION STD PACK. U.M.

80
5 SLATS
NOISE GASKET OR BRUSH FOR LM
6,50LM
PROFILES 12-14MM
28
19
GG65X28 DESCRIPTION STD PACK. U.M.
65
5 SLATS
NOISE GASKET OR BRUSH, FOR LM
6,50LM
GIRASOLE AND AXIOLUX, WEIGHT
820 G/LM APPROX.
28
GASKETS AND
BRUSHES

END SLATS AND EXTRUDED ALUM. 275LM LM
1.2 GUIDE RAILS
73
GASKETS AND SHUTTERBOX
BRUSHES
GG35MAG DESCRIPTION STD PACK. U.M.
MAXI PVC GASKET FOR EXTRUDED

275LM LM
ALUMINUM GUIDE RAILS
1.8
GG35SUP DESCRIPTION STD PACK. U.M.
MAXI PVC GASKET FOR EXTRUDED

ALUMINUM GUIDE RAILS 275LM LM
3 FOR PROFILE SAR-115
SP35NOR DESCRIPTION STD PACK. U.M.
BRUSH FOR EXTRUDED ALUMINUM

275LM LM
GUIDE RAILS
MAXI BRUSH
RAILS
MINI-SHUTTERBOX
WITH INSECT SCREEN
Z-KIT DESCRIPTION STD PACK. U.M.

KIT FOR INSECT SCREEN WITH
PAIR OF HOOKINGS, LONG SPRING,
BRAKE, PULLING CORD AND KIT KIT
COUPLE OF LOCK PLUGS FOR END
SLAT
Z-TENYP DESCRIPTION STD PACK. U.M.
ENTRY GUIDE FOR INSECT SCREEN

1 PAIR PAIR
AND FOR PROFILES 7-5-9MM
74
SHUTTERBOX MINI-SHUTTERBOX
WITH INSECT SCREEN
Z-FB165 DESCRIPTION STD PACK. U.M.

Z-FB180
Z-FB205 GALVANIZED SAFETY PLATE
WITH HOLE
Z-FB230 FOR FIXING INSECT SCREEN ROLL
10 PAIRS PAIR
TUBE
Z-RETE01 DESCRIPTION STD PACK. U.M.
1 SLAT
ROLL TUBE WITH MESH 170CM H LM
6,00 LM
Z-RETE02 DESCRIPTION STD PACK. U.M.
1 SLAT
ROLL TUBE WITH MESH 260CM H LM
6,00 LM
Z-TERM DESCRIPTION STD PACK. U.M.
EXTRUDED ALUMINUM END SLAT 5 SLATS

LM
FOR INSECT SCREEN 6,00 LM
Z-SPTERM DESCRIPTION STD PACK. U.M.
BRUSH 13MM
1 ROLL 100LM LM
FOR Z-TERM END SLAT
Z-SPGE DESCRIPTION STD PACK. U.M.
BRUSH 10MM
1 ROLL 100LM LM
FOR GE65X42 GUIDE RAIL
75
MINI-SHUTTERBOX
WITH INSECT
SCREEN
SHUTTERBOX
L3
L2
H3
B B
H1
H2
A
65 L1 65
42
SECTION (B-B) L4
L5
SIZES AND ENCUMBRANCES
MIN. 600MM
L1 NET WIDTH
MAX 1800MM
L2 SHUTTERBOX PROFILE WIDTH L1 + 123MM
L3 SHUTTERBOX TOTAL WIDTH L1 + 130MM
L1 + 60
L4 INSECT SCREEN WIDTH (MESH)
L=L4-64MM (INSECT SCREEN END SLAT)
ROLLING SHUTTER WIDTH EXCLUDED SIDE

L5 PLUGS (PROFILES AND END SLAT)
L1 + 50MM
H2+H3
H1 TOTAL MAX HEIGHT MAX 1690MM WITH MESH H 1800MM
MAX 2590MM WITH MESH H 2500MM
H2 NET HEIGHT H1 - H3
166MM WITH SIDE FRAME 165

H3 SHUTTERBOX HEIGHT

D MAX ROLL FOR ROLLING SHUTTER
76
SHUTTERBOX COLOR
RANGE
COLOR RANGE SHUTTERBOX AND SIDE FRAMES
SIZE IN MM
137 150 165 180 205 230 250 300 SIDE GUIDE
FRAMES RAILS
10
WHITE
WHITE
11 * * * *
RAL 9010
25
WHITE
15
IVORY
RAL 1015
31
GREY
RAL 7038
33
METALLIZED
GROUP 1
34
BROWN
41
BEIGE
47
CREAM
81
GREY ANTH.
RAL 7016
44
BROWN
RAL 8019
GROUP 2
59
BLACK
RAL 9005
* At clearance
77
OPERATIONS
78
OPERATIONS
79
STRAP OPERATIONS
OPERATION
STANDARD SYSTEM
12
PLASTIC PULLEY
ø WITH CAP FOR ROLL TUBE 60MM
2020 175MM H, TAPE LENGTH 5LM
10 PC
23
AUTOMATIC GALVANIZED TAPE COILER

3001 WITH STEEL PLATE
10 PC
165
3001 TAPE LENGTH 6LM

3002 3002 TAPE LENGTH 8LM
PLASTIC WALL BOX FOR LIFTING TAPE

3005 TAPE LENGTH 6LM 10 PC
TAPE LENGTH 12LM
165
3006

165
STEEL COVER PLATE

10 PC
WITH 165MM INTERAXIS

COG WHEEL REDUCTOR
WITH SUPPORT, FOR ROLL TUBE
60MM 1 PC
FOR ROLLING SHUTTERS UNTIL:
3030 30KG (RATIO 1:2,5) = 200MM
40KG (RATIO 1:2,5) = 250MM
3031
GALVANIZED TAPE GUIDE WITH TWO

NYLON ROLLERS FOR TAPE 10 PC
20-22MM
CI71RT DESCRIPTION STD PACK. U.M.

22
LIFTING TAPE, MIXED

50LM ROLL
COTTON-NYLON 22MM
80
OPERATIONS STRAP
OPERATION
MINI-SHUTERBOX
TAPE COILER
(COL 25-34) WITH TAPE LENGTH 5LM
10 PC
FRONTAL NYLON TAP GUIDE

53X22MM (COL 25-34)
10 PC
PLASTIC PULLEY WITH CAP

FOR ROLL TUBE 40MM
AND FOR ROLL TUBE 60MM
(WITH ADAPTOR 2370)
ø
2361
2362 100MM FOR SIDE FRAMES 150
10 PC
125MM FOR SIDE FRAMES 180
PULLEY ADAPTOR FOR 60 MM ROLL

TUBE
10 PC
81
STRAP OPERATIONS
OPERATION
STANDARD SYSTEM
5 4
2 2
8
9
1 LATERAL GUIDE RAILS
2 SUPPORT
3 PULLEY
4 OCTOGONAL ROLL TUBE
5 PLASTIC CAP
6 TAPE GUIDE
7 STRAP
8 TAPE COILER
9 WALL BOX
82
OPERATIONS STRAP
OPERATION
MINI-SHUTTERBOX UNIBOX SYSTEM
5
3 4
2
1
6
8
10
2 SHUTTERBOX PROFILE
3 PULLEY (WITH CAP)
4 BALL BEARING
5 SIDE FRAME
6 ENTRY GUIDE
7 BAYONET
8 TAPE GUIDE
9 LATERAL GUIDE RAIL
10 TAPE COILER
83
CRANK
OPERATION
STANDARD SYSTEM
OPERATIONS
AND SHUTTERBOX SYSTEM
UNIVERSAL GEAR WITH END OF STROKE,

SQUARE PIVOT 13MM 10 PC
CAPACITY KG 30 RATIO 1:11
CAP WITH 13MM SQUARE PIVOT

FOR CRANK 4521
4530 FOR ROLL TUBE 40MM
10 PC
AND FOR ROLL TUBE 60MM
4531
45° JOINT FOR CRANK, WITH

HEXAGONAL BAR 7MM 10 PC
LENGTH 300MM
45° JOINT FOR CRANK, WITH

HEXAGONAL BAR 7MM 10 PC
LENGTH 500MM
OPERATION CRANK WITH

HOLDER
4223 (WHITE AND SILVER) 10 PC
LENGTH 150CM
4229 LENGTH 180CM
84
CRANK
OPERATIONS OPERATION
MINI-SHUTTERBOX
U-SUP01 DESCRIPTION STD PACK. U.M.
GALVANIZED PLATE FOR ACCESSORIES

FOR MINI SIDE FRAMES
10 PC
CRANK
OPERATION
MAXI-SHUTTERBOX
PLATE 100X100 WITH CENTRAL PIVOT

12MM FOR SIDE FRAMES 250 10 PC
AND 300MM
12
85
CRANK
OPERATION
STANDARD SYSTEM
OPERATIONS
AND SHUTTERBOX SYSTEM
STANDARD SYSTEM
6
5
4 3
7
2
2 IDLE SIDE SUPPORT
4 PLASTIC CAPE
5 OPERATION SIDE CAP
6 CRANK
7 45° OR 90° JOINT
8 CRANK SUPPORT
9 OPERATING CRANK
86
CRANK
OPERATIONS OPERATION
MINISHUTTERBOX UNIBOX SYSTEM
4
10
3 9
2 8
1 2
11
6
12
7
3 CRANK CAP
4 SIDE FRAME
5 ENTRY GUIDE
6 BAYONET
8 SAFETY PLATE
9 CRANK
10 PLATE FOR ACCESSORIES
11 45° OR 90° JOINT
12 OPERATING CRANK WITH HOLDER
87
CRANK
OPERATION OPERATIONS
MAXI-SHUTTERBOX UNIBOX SYSTEM
2 11
1 3
5
8 9
10
3 CRANK CAP
4 SIDE FRAME
5 ENTRY GUIDE
6 BAYONET
8 CRANK OPERATION
9 45° OR 90° JOINT
10 OPERATING CRANK WITH HOLDER
11 CRANK SUPPORT
88
CRANK
MOTORS AND
OPERATION
ACCESSORIES
WITHOUT MANUAL OVERRIDE
FOR ROLL TUBE 40MM

WITH ADAPTOR
1 PC
MC4009 - 9NM

FOR ROLL TUBE 60MM
WITH ADAPTOR, SHORT
L=43CM 1 PC
MC6010SH - 10NM
FOR ROLL TUBE 60-70MM

WITH ADAPTOR
MC6015 - 15NM 1 PC
MC6030 - 30NM
MC6050 - 50NM
FOR ROLL TUBE 70MM

WITH ADAPTOR
MC7085 - 85NM 1 PC
MC70120 - 120NM
WITH MANUAL OVVERIDE

FOR ROLL TUBE 60 - 70MM
WITH ADAPTOR
MC6015S - 15NM 1 PC
MC6030S - 30NM
- 50NM
MC6050S
FOR ROLL TUBE 70MM

WITH ADAPTOR
- 85NM 1 PC
MC7085S
- 120NM
MC70120S
89
MOTORS AND OPERATIONS
ACCESSORIES
RADIO MOTOR

MOTORS WITH 3 ELECTRONIC LIMIT
MC6030LUX SWITCHES FOR:
- ROLL TUBE 60 MM; 32 NM 1 PC
MC6050LUX - ROLL TUBE 60 MM; 50 NM
MC70120LUX - ROLL TUBE 70 MM; 120 NM
ACCESSORIES
ADMC70 DESCRIPTION STD PACK. U.M.
ADAPTORS FOR MOTORS SERIE 60

FOR OCTOGONAL ROLL TUBE 1 PC
Ø 70 MM
INT.CAS DESCRIPTION STD PACK. U.M.
UNIPOLAR SWITCH FOR RECESS

1 PC
MOUNT
CENTRAL2 DESCRIPTION STD PACK. U.M.
REMOTE CONTROL RECEIVER

1 PC
(433.920 MHZ)
TRASM2 DESCRIPTION STD PACK. U.M.
2 BUTTON RADIO CONTROL

1 PC
TRANSMITTER + STOP BUTTON
90° MAGNETIC JOINT 1 PC
90
OPERATIONS MOTORS AND
ACCESSORIES

OPERATING CRANK WITH HOLDER
HOLDER (WHITE AND SILVER):
4223 10 PC
LENGTH 150 CM.
4229 LENGTH 180 CM.
MOTOR
STANDARD
SYSTEM
SMT6070 DESCRIPTION STD PACK. U.M.
STANDARD SUPPORT MOTORS

10 PC
SERIE 60 AND 70
SMS6070 DESCRIPTION STD PACK. U.M.
REPLACEMENT SUPPORT
10 PC
FOR MOTORS SERIE 60 AND 70
SMT6070S DESCRIPTION STD PACK. U.M.
STANDARD SUPPORT
FOR 60 AND 70 SERIE MOTORS 10 PC
WITH MANUAL OVERRIDE
SMS6070S DESCRIPTION STD PACK. U.M.
REPLACEMENT SUPPORT
FOR MOTORS SERIE 60 AND 70 WITH 10 PC
MANUAL OVERRIDE
91
MOTOR OPERATIONS
MINI-SHUTTERBOX
SMC40 DESCRIPTION STD PACK. U.M.
SUPPORT FOR MOTORS SERIE 40 10 PC
SUPPORT FOR 60 AND 70 SERIE

10 PC
MOTORS
SMC6070S DESCRIPTION STD PACK. U.M.
SUPPORT FOR 60 AND 70 SERIE

10 PC
MOTORS WITH MANUAL OVERRIDE
MOTOR
MAXI-SHUTTERBOX
PMC6070 DESCRIPTION STD PACK. U.M.
100X100 PLATE WITH SUPPORT

10 PC
PMC6070S DESCRIPTION STD PACK. U.M.
100X100 PLATE FOR MOTORS SERIE

10 PC
60 AND 70 WITH MANUAL OVERRIDE
92
OPERATIONS MOTOR
STANDARD SYSTEM - MOTOR OPERATION WITHOUT MANUAL OVERRIDE
2 IDLE SIDE SUPPORT
4 PLASTIC CAP
5 STANDARD MOTOR
6 SWITCH
7 ADAPTOR
8 MOTOR SUPPORT
93
MOTOR OPERATIONS
STANDART SYSTEM - MOTOR OPERATION WITH MANUAL OVERRIDE
2 IDLE SIDE SUPPORT
4 IDLE SIDE CAP
5 90° JOINT WITH FAST CLUTCH
6 OPERATION CRANK
7 MOTOR WITH MANUAL OVERRIDE
8 MAGNETIC CONNECTION
9 SWITCH
10 ADAPTOR
11 MOTOR SUPPORT
94
OPERATIONS MOTOR

MOTOR OPERATION WITHOUT MANUAL OVERRIDE
3 SIDE FRAME
4 ENTRY GUIDE
5 BAYONET
7 SAFETY PLATE
8 MOTOR SUPPORT - SERIE 40
8b MOTOR SUPPORT - SERIE 60
9 ADAPTOR
10 MOTOR
95
MOTOR OPERATIONS
MOTOR OPERATION WITH MANUAL OVERRIDE
3 SIDE FRAME
4 ENTRY GUIDE
5 BAYONET
7 MOTOR SUPPORT
8 90°JOINT WITH FAST CLUTCH
10 OPERATION CRANK
11 ADAPTOR
12 MOTOR
96
OPERATIONS MOTOR
MAXI-SHUTTERBOX SYSTEM
MOTOR OPERATION WITHOUT MANUAL OVERRIDE
3 SIDE FRAME
4 ENTRY GUIDE
5 BAYONET
7 MOTOR SUPPORT
8 ADAPTOR
9 MOTOR
97
MOTOR OPERATIONS
MAXI- SHUTTERBOX SYSTEM
MOTOR OPERATION WITH MANUAL OVERRIDE
3 SIDE FRAME
4 ENTRY GUIDE
5 BAYONET
7 MOTOR SUPPORT
8 90°JOINT WITH FAST CLUTCH
10 OPERATION CRANK
11 ADAPTOR
12 MOTOR
98
OPERATIONS COMMON
ACCESSORIES
ROLL TUBES
Ø 40 MM OCTOGONAL ROLL TUBE 12 SLATS

LM
THICKNESS 5 - 10 5,8 LM
40
Ø 60 MM OCTOGONAL ROLL TUBE

2000 THICKNESS 5 - 10
6 SLATS
LM
5,8 LM
2001 THICKNESS 8 - 10
60
Ø 70 MM OCTOGONAL ROLL TUBE

1 SLATS
THICKNESS 10 - 10 LM
5,8 LM
70
STANDARD SYSTEM
PVC CAP WITH GALVANIZED PIVOT

10 PC
Ø12 MM FOR ROLL TUBE Ø 60 MM
PVC ADJUSTABLE CAP

2013 - FOR Ø 60 MM ROLL TUBE
10 PC
ø12
- FOR Ø 70 MM ROLL TUBE

2013-70
99
COMMON
ACCESSORIES
OPERATIONS

7000
WALL FIXING SUPPORT WITH BALL

10 PC
BEARING FOR MAX 30 KG SHUTTERS

7011
SCREWING SUPPORT WITH
REMOVABLE BALL BEARING 10 PC
FOR MAX 60 KG SHUTTERS

7013
ADJUSTABLE FIXING BRACKET 10 PC
ADJUSTABLE FIXING BRACKET WITH

10 PC
REMOVABLE BALL BEARING
BALL BEARING FOR REPLACEMENT,

10 PC
12 MM PIVOT WITH SAFETY PIN
GUIDE ROLLER 10 PC
100
OPERATIONS ACCESSORI
COMUNI
MINI-SHUTTERBOX
ADJUSTABLE CAP
10 PC
FOR 40MM ROLL TUBE
ADJUSTABLE CAP
10 PC
FOR 60MM ROLL TUBE
Ø 28 MM BALL BEARING
10 PC
FOR CAPS 2330 - 2331
MAXI-SHUTTERBOX
2357 100
42
100X100 PLATE
FOR Ø 42 MM BALL BEARING 10 PC
100
FOR 250 AND 300 MM SIDE FRAMES
Ø 42 MM BALL BEARING WITH

10 PC
NYLON BUSHING FOR PLATE 2357
PVC CAP WITH Ø 12 MM

GALVANIZED PIVOT FOR Ø 60 MM 10 PC
ROLL TUBE
PVC ADJUSTABLE CAP

2013 - FOR Ø 60 MM ROLL TUBE 10 PC
ø12
2013-70 - FOR Ø 70 MM ROLL TUBE
101
COMMON
ACCESSORIES
OPERATIONS
MINI-SHUTTERBOX UNIBOX SYSTEM - IDLE SIDE
3 CAP
4 BALL BEARING
5 SIDE FRAME
6 BAYONET
8 SAFETY PLATE
102
OPERATIONS COMMON
ACCESSORIES
MAXI-SHUTTERBOX UNIBOX SYSTEM - IDLE SIDE
3 CAP
4 BALL BEARING
5 SIDE FRAME
6 BAYONET
8 BALL BEARING SUPPORT
103
TAP-GARAGE
TAP-GARAGE
TAP-GARAGE
Tap - Garage, Croci new locking system for all types of garages and shops, is the most innovative
garage door which assures to your customers the highest protection, quiteness and comfort, respecting the
building architecture and gives remarkable elegance.
TAP-GARAGE
Croci garage doors respect the existing laws and is able to meet many customers’ needs. It is available in
ceiling, shutterbox and support-to-wall systems; it can be easily fixed and used in any type of building.
Tap Garage is also equipped with intermediate extruded aluminum profiles of the same color, to illuminate and
ventilate the rooms.
Garage and shop shutters manufactured by Croci comply with the existing EC norms
(EN 292-2/60204-1/418, UNI EN 13241-1/12453/12445/12604-1/ 12605, EN 12978, UNI EN 12444/12424)
with the following Directives: Machinery DIrective 2006/42/CE, Low Tension Directive 73/23/cee and
Electromagnetic Compatibility Directive 89/336.
AR-77 TAP-GARAGE
ALUMINUM PROFILE
WITH MEDIUM DENSITY
FOAM
TECHNICAL DATA
Kg/lm weight: 0,380 kg approx.
77
Kg/sqm weight: 4,94 kg approx.
Slats per sqm: 13
Max sizes: max width: 4,00 lm
max height: 5,00 lm - max surface: 16
sqm
Standard packaging: 15 slats - 6,5 ml
18,5
SHUTTERS
Assembled rolling shutter with junction to roll tube, side plugs (TLAR/77), standard end slat (TE19X77)
ROLL DIAMETER
SHUTTERBOX SYSTEM - SHUTTER HEIGHT (mm) with anti-lifting system SEC
1800 2000 2200 2400 2600 2800 3000 3200 3400 3600 3800 4000 4200 4400 4600 4800 5000
Roll tube Ø60 251 273 275 281 309 309 309 309 309 335 341 341 345 355 375 375 375
Roll tube Ø70 259 259 291 291 291 299 325 325 325 325 355 361 361 361 365 385 385
SUPPORT TO WALL SYSTEM - SHUTTER HEIGHT (mm) with extruded junction 77SEC
1800 2000 2200 2400 2600 2800 3000 3200 3400 3600 3800 4000 4200 4400 4600 4800 5000
Roll tube Ø102 255 259 281 289 289 293 319 321 321 323 345 351 351 351 359 379 385
EXTRUDED PROFILES
ESA-77 19X77 extruded profile for ventilation
ESF-77 19X77 extruded profile for lighting
106
TAP-GARAGE AR-77
SUITABLE END SLATS (PAG. 110)

TE19x77 Aluminum extruded end slat 19x77 mm
SUITABLE GUIDE RAILS (PAG. 111)

SHUTTERBOX AND WALL SYSTEMS (to be used with GG35NOR standard gasket) GE90X35 - GE100X35
CEILING SYSTEM (to be used with SP35MAG maxi brush) GE85X38
SUITABLE SECURITY ACCESSORIES (PAG. 112)

SEC60 Anti-lifting security system for 60mm roll tube
SEC70 Anti-lifting security system for 70mm roll tube
SE43E-77 Double sided key lock (inside/outside) with bar
AT-77E Anti-storm insert for ESA/77 and ESF/77 extruded profiles
COLOR RANGE
10 11
WHITE RAL 9010
GROUP 1
15 IVORY 33 34 42 GREEN 81 G. ANTR.

RAL 1015 METALLIZ. BROWN RAL 6005 RAL 7016
GROUP 2
39 DARK
WOOD.
A
R IS
ET T
UR
A L A N AT
P
FREE ODP FREON
107
AR-77 TAP-GARAGE
SHUTTER DOOR COMBINATIONS
3
16
21
2
3
PROFILED SLAT SHUTTER WITH END SLAT PROFILED SHUTTER WITH 3 SLATS FOR
AR-77T LIGHTING, 2 FOR VENTILATION AND END
AR-77T-SF (ceiling system) SLAT
AR-77TFA
AR-77TFA-SF (ceiling system)
213
2
3
PROFILED SHUTTER WITH 3 SLATS FOR PROFILED SHUTTER WITH 2 SLATS FOR
LIGHTING AND END SLAT VENTILATION AND END SLAT
AR-77TF AR-77TA
AR-77TF-SF (ceiling system) AR-77TA-SF (ceiling system)
108
TAP-GARAGE AR-77
TAP SHOP
In order to meet the growing demand of security closures for

shops, Croci has conceived an additional Tap Garage version
called Tap Shop, entierely made of extruded profiles for lighting
(without insert). The 110 mm hole pitch allows an excellent
visibility inside the shop.
Tap Shop is recommended both for new building and for
replacements.
ESF/77T
SHUTTER WITH EXTRUDED PROFILES
FOR LIGHTING
77
19
ESF/77 TLESF/77
INTERMEDIATE ALUMINUM PLUGS FOR TAP SHOP
EXTRUDED PROFILE
For lighting
Weight per sqm: kg 10,860 abt
Slats per sqm: 13 pcs
109
CEILING TAP-GARAGE
SYSTEM
Thanks to its ability to slide on horizontal guide rails supplied with plugs with rollers, his
system takes up less room, which is suitable for low-ceiling houses. Its motorized operation
uses a particular compensation spring system and is also supplied with manual lifting.
Max opening size Minimum opening size

Width 3,5 lm Width 2 lm
Height 3 lm Height 1,7 lm *
Surface 9 sqm
* Wall mount
a) 190
b) 150
Connector total encumbrance

a) motorized ceiling system
b) manual ceiling system
A B C
A The sliding system, with nylon plugs provided with rollers reduces noise and friction.
B The spring counterbalance system allows the use of double sided manual emergency inside or outside (on request).
C The anti-falling system (patent n. BO2006A 000807 of 27/11/06).
110
TAP-GARAGE SHUTTERBOX
SYSTEM
This system is extremely easy to be assembled and respects the architectural features of the
place in which it is assembled.
Max opening size

AR-77
Width 4 lm
Height 2,6 lm
Surface 10 sqm
SUPPORT TO
WALL SYSTEM
This system, which has the same features of the previous one, allows you to close largest
surfaces.
Max opening size

Width 4 m
Height 5 m
Surface 16 sqm
111
EXTRUDED TAP-GARAGE
PROFILES
ESF-77 DESCRIPTION STD PACK. U.M.
INTERMEDIATE PROFILE FOR
LIGHTING AND FOR ESF-77T
SHUTTER (TAP SHOP) 19X77 MM
WITH PLEXIGLASS INSERT SLOT 5 SLATS
LM
77
5,30 LM
WEIGHT 835 G/LM
WEIGHT 10,860 KG/SQM APPROX.
19 SLATS PER SQM 13
ESA-77 DESCRIPTION STD PACK. U.M.
INTERMEDIATE PROFILE
FOR VENTILATION 16X77 MM
5 SLATS
LM
77
WEIGHT 732 G/LM 5,30 LM

WEIGHT 9,520 KG/SQM APPROX.
SLATS PER SQM 13
16
FI-77 DESCRIPTION STD PACK. U.M.
POLYCARBONATE TRASPARENT
INSERT FOR EXTRUDED PROFILE 2 SLATS
LM
45
ESF-77 2,5 LM
1,5
END SLATS AND GASKETS
ALUMINUM EXTRUDED END SLAT 5 SLATS

77
LM
19X77 MM OF 5,30 LM
19
GGTE-77 DESCRIPTION STD PACK. U.M.
PVC GASKET 1 SLAT

LM
FOR END SLAT TE19X77 5,30 LM
112
TAP-GARAGE GUIDE RAILS
SHUTTERBOX AND SUPPORT TO WALL SYSTEM AND GASKETS
ALUMINUM EXTRUDED GUIDE RAIL

35 24 90X35 WITH DOUBLE SEAT 3 SLATS
LM
FOR ANTINOISE GASKET 6,50 LM
90
EXTRUDED ALUMINUM ANTISTORM

35 GUIDE RAIL 100X35 MM WITH 3 SLATS
LM
DOUBLE SEAT FOR GASKET 6,50 LM
100
PVC GASKET FOR EXTRUDED

275 LM LM
1.2 ALUMINUM GUIDE RAILS
CEILING SYSTEM
ALUMINUM EXTRUDED GUIDE RAIL

38 85X38 MM WITH DOUBLE SEAT 2 SLATS
LM
FOR GASKET AND BRUSH 5,30 LM
85
SF-CARTER DESCRIPTION STD PACK. U.M.
ALUMINUM EXTRUDED PROTECTION

2 SLATS
GUARD FOR GE85X38 GUIDE RAIL LM
5,30 LM
WEIGHT 815 G/LM
MAXI BRUSH FOR ALUMINUM

275 LM LM
EXTRUDED GUIDE RAILS
113
SHUTTER TAP-GARAGE
ACCESSORIES SHUTTERBOX SYSTEM - SUPPORT TO WALL SYSTEM
TLAR-77 DESCRIPTION STD PACK. U.M.
PLASTIC SIDE PLUG

500 PACK
FOR AR-77 PROFILE
TLESF-77 DESCRIPTION STD PACK. U.M.
PLASTIC SIDE PLUG WITH SCREWS

500 PACK
FOR ESF-77 AND ESA-77 PROFILES
METAL STAPLES H408 FOR P70PNE

28.000 PACK
STAPLER - PROFILE AR-77
P70PNE DESCRIPTION STD PACK. U.M.
PNEUMATIC STAPLER 1 PACK.
SE43E-77 DESCRIPTION STD PACK. U.M.
DOUBLE SIDED KEY LOCK (INSIDE/

OUTSIDE) WITH BAR 1 PC
FOR PROFILE TE19X77
ANTI-LIFTING SYSTEM FOR Ø 60 MM

ROLL TUBE 25 PC
ONLY FOR SHUTTERBOX SYSTEM
ANTI-LIFTING SYSTEM
25 PC
FOR Ø 70 MM ROLL TUBE
114
TAP-GARAGE SHUTTER
ACCESSORIES
77-SEC DESCRIPTION STD PACK. U.M.
ALUMINUM JUNCTION
1 SLAT
SHUTTER FOR 102X2MM ROLL TUBE ML
3,00 LM
FOR SUPPORT TO WALL SYSTEM
AT-77E DESCRIPTION STD PACK. U.M.
ALUMINUM ANTI-STORM INSERT

WITH SCREW 5X50, FOR EXTRUDED
100 PACK
PROFILES TO BE USED WITH
TLESF-77 PLUG (ESF-77 AND ESA-77)
CEILING SYSTEM
SF-TLAR DESCRIPTION STD PACK. U.M.
NYLON ROLLING SIDE PLUG

50 PACK
FOR CEILING GARAGE DOORS
SF-RIV DESCRIPTION STD PACK. U.M.
Ø 3,8X7MM ALUMINUM RIVETS

FOR FIXING SF-TLAR PLUG TO AR-77 100 PACK
PROFILE
SF-VIT DESCRIPTION STD PACK. U.M.
Ø 3,5X20MM AUTO THREADING

SCREWS, FOR FIXING SF-TLAR AND
100 PACK
SF-TLTE PLUGS TO TE19X77, ESF-77
AND ESA-77 PROFILES
SF-TLTE DESCRIPTION STD PACK. U.M.
NYLON PLUG FOR TE19X77 END

10 PAIRS PACK
SLAT
115
SYSTEM SHUTTERBOX AND SIDE FRAMES
45° ALUMINUM SHUTTERBOX 3 SLATS

LM
IN 2 PARTS 300MM 6,50 LM
ROUND ALUMINUM SHUTTERBOX 3 SLATS

LM
IN 2 PARTS 300MM 6,50LM
45° SIDE FRAME

5 PAIRS PAIR
FOR MAXI-SHUTTERBOX, 300MM
ROUND SIDE FRAME

5 PAIRS PAIR
FOR MAXI-SHUTTERBOX, 300MM
U-BAY2 DESCRIPTION STD PACK. U.M.
20X4MM GALVANIZED BAYONET

FOR 250 AND 300MM MAXI SIDE 5 PAIRS PAIR
FRAMES
U-TENY77 DESCRIPTION STD PACK. U.M.
NYLON TERMINAL GUIDE

5 PAIRS PAIR
FOR 250 AND 300 MM SIDE FRAMES
TENYC77 DESCRIPTION STD PACK. U.M.
NYLON ENTRY GUIDE WITH

ROLLERS FOR SHUTTERBOX 5 PAIRS PAIR
AND 300 MM SIDE FRAMES
116
MOTORS AND ACCESSORIES
SYSTEM
FOR Ø 60MM ROLL TUBE WITH

ADAPTOR
1 PC
MC6050 - 50 NM

ADAPTOR
MC7085 - 85 NM 1 PC
MC70120 - 120 NM

ADAPTOR AND MANUAL OVERRIDE 1 PC
- 50 NM
MC6050S

ADAPTOR AND MANUAL OVERRIDE
MC7085S - 85 NM 1 PC
MC70120S - 120 NM
ADAPTOR FOR MOTORS SERIE 60

1 PC
AND Ø 70MM ROLL TUBE
PMC6070S DESCRIPTION STD PACK. U.M.
100X100 PLATE FOR MOTORS

1 PC
SERIE 60S AND 70S
PMC6070 DESCRIPTION STD PACK. U.M.
100X100 PLATE WITH SUPPORT

10 PC
117
SYSTEM ROLL TUBES AND ACCESSORIES
Ø 60MM OCTOGONAL ROLL TUBE 6 SLATS

LM
THICKNESS 8-10 5,80 LM
Ø 70MM OCTOGONAL ROLL TUBE 1 SLAT

LM
THICKNESS 10-10 5,80 LM
7706-CAS DESCRIPTION STD PACK. U.M.
ANTI-FALLING PARACHUTE
APPLIANCE WITH 13X13MM 1 PC
SQUARE HOLE
ADJUSTABLE REINFORCED CAP

WITH13X13MM SQUARE PIVOT 1 PC
FOR Ø 60MM ROLL TUBE
ADJUSTABLE REINFORCED CAP

WITH13X13MM SQUARE PIVOT 1 PC
FOR Ø 70MM ROLL TUBE

OPERATING CRANK WITH HOLDER
(WHITE AND SILVER)
4223 10 PC
LENGTH 150 CM
4229 LENGTH 180 CM
118
AUTOMATION DEVICES FOR SECURITY SYSTEMS
SYSTEM
CONTROL UNIT FOR GARAGE

1 PC
DOORS
CONTROL UNIT WITH TEMPORARY

1 PC
SWITCH
TRASM1 DESCRIPTION STD PACK. U.M.
TRANSMITTER WITH ONE BUTTON 1 PC
CP77CE DESCRIPTION U.M.
MECHANIC EDGE, CUT TO MEASURE LM
CP77120 DESCRIPTION STD PACK. U.M.
1 SLAT
MECHANIC EDGE 1,2 LM LM
1 SLAT
MECHANIC EDGE 1,8 LM LM
CPKITCE DESCRIPTION STD PACK. U.M.
KIT FOR MECHANIC EDGE

WITH CABLE-HOLDER CHAIN,
KIT KIT
PROTECTION GUARD FOR CHAIN,
SUPPORTS AND SCREWS
119
SYSTEM AUTOMATION DEVICES FOR SECURITY SYSTEMS
IR77E DESCRIPTION STD PACK. U.M.
EXTERNAL INFRARED PHOTOCELLS 1 PC
LG77 DESCRIPTION STD PACK. U.M.
YELLOW BLINKER 1 PC
SWITCHES AND BUTTONS
EST.PAR DESCRIPTION STD PACK. U.M.
EXTERNAL WALL MOUNTED KEY

1 PC
SWITCH
EST.INC DESCRIPTION STD PACK. U.M.
EXTERNAL RECESSED KEY SWITCH 1 PC
SELET DESCRIPTION STD PACK. U.M.
LEVER SWITCH WITH EMERGENCY

1 PC
BUTTON
120
SYSTEM
TECHNICAL DATA
FIX THE SIDE FRAMES TO THE WALL
L
90 L1 90 93
L2
300
H = OPENING HEIGHT
SHUTTER
U/FI300/45
GE90X35
L3
DIMENSIONS AND ENCUMBRANCE
H= OPENING HEIGHT
L = L1 + (90X2) SHUTTERBOX ENCUMBRANCE WITH TEMPORARY SWITCH
L = L1 + (90+93) SHUTTERBOX DIMENSIONS WITH CABLE GUARD AND REMOTE CONTROL
L= OPENING WIDTH
L2 = L1+90 FINISHED SHUTTER WIDTH (INCLUDING SIDE PLUGS)
L3 = L-138 Ø 60 AND Ø 70 ROLL TUBE LENGTH
121
SUPPORT TO TAP-GARAGE
WALL SYSTEM
WALL SUPPORT WITH ADJUSTABLE

1 PAIR
CARRIAGE
NYLON PLATE FOR WALL SUPPORT 1 PAIR
MOTORS AND ACCESSORIES
MOTORS FOR Ø70 MM ROLL TUBE

MC7085 WITH ADAPTOR: 1 PC
- 85 NM
MC70120 1
- 120 NM

MOTORS FOR Ø70 MM ROLL TUBE
WITH ADAPTOR AND MANUAL
MC7085S OVERRIDE: PC
- 85 NM 1
MC70120S - 120 NM 1
ADAPTOR FOR SERIE 70 MOTORS

1 PC
AND ROUND Ø 102 MM ROLL TUBE
122
TAP-GARAGE SUPPORT TO
WALL SYSTEM
SMC77S DESCRIPTION STD PACK. U.M.
SUPPORT FOR MOTORS SERIE 70S 10 PC
SUPPORT FOR MOTOR SERIE 70 10 PC
ROLL TUBES AND ACCESSORIES
2077-CAL DESCRIPTION STD PACK. U.M.
ROUND Ø 102 MM ROLL TUBE WITH

ADJUSTABLE WELDED CAP FOR 1 SLAT
LM
WALL SYSTEM GARAGE DOORS 6,0 LM
WITH MOTORS SERIE 70
ANTIFALLING PARACHUTE
APPLIANCE WITH 18X18MM SQUARE 1 PC
HOLE
SUPPORT FOR ANTI-FALLING

PARACHUTE APPLIANCE FOR 1 PC
SUPORTS TO WALL
TENYB77 DESCRIPTION STD PACK. U.M.
ENTRY GUIDE WITH NYLON

1 PC
ROLLERS
123
WALL SYSTEM
77 A220 DESCRIPTION STD PACK. U.M.

77 A380
GALVANIZED CRANK ROD 1 PC
220 CM FIXED CRANK HANDLE FOR

1 PC
GALVANIZED ROD
AUTOMATION DEVICES FOR SECURITY SYSTEMS
CENTRAL 1 DESCRIPTION STD PACK. U.M.
CONTROL UNIT FOR GARAGE

1 PC
DOORS
CENTRAL 3 DESCRIPTION STD PACK. U.M.
CONTROL UNIT WITH TEMPORARY

1 PC
SWITH
TRASM 1 DESCRIPTION STD PACK. U.M.
TRASMITTER WITH 1 BUTTON 1 PC
124
TAP-GARAGE SUPPORT TO
WALL SYSTEM
CP77CE DESCRIPTION U.M.
MECHANIC EDGE CUT TO MEASURE PC
1 SLAT
MECHANIC EDGE LM
1,2 LM
1 SLAT
MECHANIC EDGE PC
1,8 LM
CPKITCE DESCRIPTION STD PACK. U.M.
KIT FOR MECHANIC EDGE

WITH CABLE-HOLDER CHAIN,
KIT KIT
PROTECTION GUARD FOR CHAIN,
SUPPORTS AND SCREWS
IR77E DESCRIPTION STD PACK. U.M.
EXTERNAL INFRARED PHOTOCELLS 1 PC
LG77 DESCRIPTION STD PACK. U.M.
YELLOW BLINKER 1 PC
125
WALL SYSTEM SWITCHES AND BUTTONS

1 PC
SWITCH

1 PC
BUTTON
126
TAP-GARAGE WALL
SYSTEM
TECHNICAL DATA
18 A X
L
0
M
450
135 L1 135
L2
200
SHUTTER
H = OPENING HEIGHT
50
7701
GE90X35 UP TO L1= 4000 MM
GE100X35 OVER L1=4000 MM
GE90X35
GE100X35
L3
DIMENSIONS AND ENCUMBRANCES
GARAGE DOOR UP TO L1 = 4000 MM (AR-77)
L = L1+(135X2)
L1 = OPENING WIDTH (INNER GUIDE RAILS)
L2 = L1+90 MM (FINISHED SHUTTER WIDTH WITH SIDE PLUGS)
L3 = L-200 (Ø 102MM ROUND ROLL TUBE LENGTH)
GE90X35 GUIDE RAILS
127
CEILING TAP-GARAGE
SYSTEM ACCESSORIES
SF-KIT DESCRIPTION STD PACK. U.M.
CEILING SYSTEM ACCESSORIES::

- BRACKETS - STEEL ROPES
1 KIT
- PINS - ROPE PULLEYS
- 90° JOINTS
SF-KIT2 DESCRIPTION STD PACK. U.M.
BRACKET KIT FOR GARAGE DOORS

1 KIT
WITH OPENING WIDTH OVER 2,50 M
SF-MAN DESCRIPTION STD PACK. U.M.
EXTERNAL RELEASE HANDLE

WITH KEY AND EXTERNAL PLASTIC 1 PC
HANDLE
SF-MANPVC DESCRIPTION STD PACK. U.M.
EXTERNAL PLASTIC HANDLE 1 PC
ASSIST SPRINGS
SF-M36X3,5 FOR OCTOGONAL TUBE:
SF-M34,5X3,5 - Ø 36X3,5 MM
SF-M33X3,5 - Ø 34,5X3,5 MM
SF-M39X4,0 - Ø 33X3,5 MM 1 PAIR
SF-M42,5X4,3 - Ø 39X4,0 MM
SF-M41X4,3 - Ø 42,5X4,3 MM
SF-M43X4,5 - Ø 41X4,3 MM
SF-M41X4,5 - Ø 43X4,5 MM
- Ø 41X4,5 MM
128
TAP-GARAGE CEILING
SYSTEM
SF-KIT3 DESCRIPTION STD PACK. U.M.
KIT FOR GARAGE DOORS WITH

1 KIT
GUIDE RAILS HEIGHT ≤ 2,10M
SF-VL1 DESCRIPTION STD PACK. U.M.

SF-VL2
1 BARRA
ALUMINUM PROFILED LINTEL ML
DA 6,50 ML
SF-MANINT DESCRIPTION STD PACK. U.M.
INTERNAL PLASTIC HANDLE 1 PC
SF-KITSE DESCRIPTION STD PACK. U.M.
PAIR OF INTERNAL/EXTERNAL
LOCKS WITH SAME KEY, WITH 0,5 LM 1 KIT
BAR AND FIXING BRACKETS
SF-AC01 DESCRIPTION STD PACK. U.M.
SAFETY BRAKE DEVICE FOR CEILING

1 PAIR
SYSTEM (MOTORIZED AND MANUAL)
129
CEILING TAP-GARAGE
SYSTEM MOTORS AND ACCESSORIES
550N CEILING SYSTEM MOTOR WITH

REMOTE CONTROL, EXTERNAL
PHOTOCELLS, YELLOW BLINKER
AND MANUAL RELEASE 1 PC
- ALTEZZA GUIDA. FINO A 2500 MM

SF-MCA550
- ALTEZZA GUIDA FINO A 3000 MM
SF-MCA550M
SF-TRASM DESCRIPTION STD PACK. U.M.
2 CHANNEL REMOTE CONTROL

1 PC
WITH SUPPORT (OPTIONAL)
SWITCHES AND BUTTONS

1 PC
SWITCH

1 PC
BUTTON
130
TAP-GARAGE CEILING
SYSTEM
APPLICATION TYPE A
90° JOINT AND GUIDE RAILS IN WALL MOUNT
MOTOR WIDTH
GUIDE RAIL WIDTH 150 SHUTTER WIDTH
OPENING WIDTH
H
85 NET WIDTH 85
OPENING HEIGHT
GUIDE RAIL
NET WIDTH
HEIGHT
SHUTTER WIDTH 9
OPENING WIDTH
38
96
35
85
MAX OPENING WIDTH= 3500 MM; MAX OPENING HEIGHT= 3000 MM; MAX SURFACE= 9 SQM
MIN OPENING WIDTH= 2000 MM; MIN OPENING HEIGHT= 1700 MM (MANUAL AND MOTORIZED)
H= 150 (MANUAL) OR 100 (MOTORIZED)
NET HEIGHT (PASSAGE)= OPENING HEIGHT- 60 (MANUAL AND MOTORIZED)
GUIDE RAIL HEIGHT= OPENING HEIGHT
GUIDE RAIL WIDTH=2350 (OPENING HEIGHT < 2200) OR OPENING HEIGHT + 100 (OPENING HEIGHT ≥ 2200)
MOTOR WIDTH=3400 (OPENING HEIGHT < 2500) OR 4310 (OPENING HEIGHT UP TO 3000)
NET WIDTH=OPENING WIDTH
SHUTTER WIDTH=OPENING WIDTH + 70 (INCLUDING PLUGS, WITHOUT ROLLERS)
131
CEILING TAP-GARAGE
SYSTEM
APPLICATION TYPE B
(90° JOINT IN THE OPENING AND GUIDE RAILS IN WALL MOUNT)
MOTOR WIDTH SHUTTER WIDTH

GUIDE RAIL WIDTH 150 ALUMINUM LINTEL OPENING WIDTH
H
85 NET WIDTH 85
OPENING HEIGHT
NET HEIGHT
GUIDE RAIL
HEIGHT
SHUTTER WIDTH 9
OPENING WIDTH
38
96
35
85
MAX OPENING WIDTH=3500 MM; MAX OPENING HEIGHT=3150 MM (MANUAL) OR 3190

MM (MOTOR)
MIN OPENING WIDTH=2000 MM; MIN OPENING HEIGHT=1850 MM (MANUAL) OR 1890 MM (MOTORIZED)
HEIGHT= 150 (MANUAL) OR 190 (MOTORIZED)
NET HEIGHT (PASSAGE)= OPENING HEIGHT - 210 (MANUAL) OR OPENING HEIGHT - 250 (MOTORIZED)
GUIDE RAIL HEIGHT= OPENING HEIGHT-HEIGHT
GUIDE RAIL WIDTH_2350 (GUIDE HEIGHT < 2200) OR OPENING HEIGHT + 100 (GUIDE HEIGHT ≥ 2200)
MOTOR WIDTH= 3400 (GUIDE HEIGHT UP TO 2500) OR 4310 (GUIDE HEIGHT UP TO 3000)
NET WIDTH= OPENING WIDTH
SHUTTER WIDTH= OPENING WIDTH + 70 (INCLUDING PLUGS, WITHOUT ROLLERS)
132
TAP-GARAGE CEILING
SYSTEM
APPLICATION TYPE C
(90° JOINT AND GUIDE RAILS IN THE OPENING)
MOTOR WIDTH OPENING WIDTH

GUIDE RAIL WIDTH 150 ALUMINUM LINTEL SHUTTER WIDTH
H
85 NET WIDTH 85
OPENING HEIGHT
OPENING WIDTH
NET HEIGHT
GUIDE RAIL
HEIGHT
50
SHUTTER WIDTH 9
MIN.30
38
96
35
85
MAX OPENING WIDTH= 3670 MM; MAX OPENING HEIGHT= 3150 MM (MANUAL) OR
3190 (MOTORIZED); MAX SURFACE= 9 SQM
MIN OPENING WIDTH=2170MM; MIN OPENING HEIGHT=1850 MM (MANUAL) OR 1890 MM (MOTORIZED)
HEIGHT=150 (MANUAL) OR 190 (MOTORIZED)
NET HEIGHT (PASSAGE)=OPENING HEIGHT - 210 (MANUAL) OR OPENING HEIGHT - 250 (MOTORIZED)
GUIDE RAIL HEIGHT=OPENING HEIGHT - HEIGHT
GUIDE RAIL WIDTH=2350 (GUIDE HEIGHT < 2200) OR OPENING HEIGHT + 100 (GUIDE HEIGHT ≥ 2200)
MOTOR WIDTH=3400 (GUIDE HEIGHT UP TO 2500) OR 4310 (GUIDE HEIGHT UP TO 3000)
NET WIDTH=OPENING WIDTH - 170
SHUTTER WIDTH=OPENING WIDTH - 100 (INCLUDING PLUGS, WITHOUT ROLLERS)
133
CEILING TAP-GARAGE
SYSTEM
MOTORIZED CEILING SYSTEM - ACCESSORIES
ALLOWED OPENING SIZES:

MIN WIDTH= 2,0 M - MIN HEIGHT= 1,7 M
MAX WIDTH= 3,5 M - MAX HEIGHT= 3,0 M
MAX OPENING SURFACE= 9 SQM
1 90° JOINT
2 STEEL ROPE
3 BRACKET FOR ROPE FASTENING
4 Ø 70MM ROPE PULLEY
SF/KIT
6 Ø 55MM ROPE PULLEY AND PIN

7 SPRING TIE ROD
8 BRACKET FOR SPRING FIXING
9 GUIDE RAIL FIXING BRACKET
10 SHUTTER DRAGGING BRACKET
11 COMPENSATION SPRING
12 CEILING MOTOR WITH REMOTE CONTROL, PHOTOCELL AND BLINKER
13 EXTERNAL RELEASE
14 PROTECTION GUARD
15 HORIZONTAL GUIDE GE85X38
16 VERTICAL GUIDE GE85X38
17 PROFILES
18 SAFETY BRAKE SYSTEM
Note: if guide rail height is <2200mm, springs and accessories are installed horizontally (under horizontal guide rails)
134
TAP-GARAGE CEILING
SYSTEM
MANUAL CEILING SYSTEM - ACCESSORIES
ALLOWED OPENING SIZES:

MIN WIDTH= 2,0 M - MIN HEIGHT= 1,7 M
MAX WIDTH= 3,5 M - MAX HEIGHT= 3,0 M
MAX OPENING SURFACE= 9 SQM
1 90° JOINT
2 STEEL ROPE
4 Ø 70MM ROPE PULLEY
SF/KIT
6 Ø 55MM ROPE PULLEY AND PIN

7 SPRING TIE ROD
8 BRACKET FOR SPRING FIXING
9 GUIDE RAIL FIXING BRACKET
11 COMPENSATION SPRING
12 INTERNAL/EXTERNAL LOCK
KITSE
SF/
13 BRACKET FOR ROPE FASTENING

14 PROTECTION GUARD
15 HORIZONTAL GUIDE GE85X38
16 VERTICAL GUIDE GE85X38
17 PROFILES
18 SAFETY BRAKE SYSTEM
Note: if guide rail height is <2200mm, springs and accessories are installed horizontally (under horizontal guide rails)
135
TAP-BLIND
TAP-BLIND
Tap Blind is a top-class security closure system, made of extruded aluminum slats with motor operation (dead man
switch with manual override on request). It is both a grille and a shutter and meets any security, aesthetic and confort
requirements.
Easy to install, Tap Blind has been conceived to suit any kind of building, but it is also ideal for offices, shops, schools
and museums, and can be realized in all RAL colors in addition to Croci color range..
Tap Blind is a security shutter, which protects your house, but also a blind and a grille, allowing the modulation
of external light.
Tap Blind has passed security tests in accordance with the UNI EN 1627 and it has been classed RC3 (Test Report N.
322669 - Istituto Giordano).
136
TAP-BLIND
CLASS 3
IN ACCORDANCE WITH EUROPEAN STANDARDS
UNI EN 1627
THE SECURITY
SHUTTER GRILLE
TAP-BLIND
137
SHUTTER TAP-BLIND
GRILLE ALUMINUM SHUTTER
The aluminum extruded profiles (19x65) are connected to each other by steel cams
which make the grille effect possible and prevent the shutter lifting, while the plastic
rollers (parts of the cams), prevent the shutter from coming outside the guide rails
(tear-proof system) and ensure a silent and fluid mouvement of the shutter.
PROFILE SECTION
Height = 65 mm
Weight per lm = 1,35 kg
Weight per sqm = abt 21 kg
Cams with
plastic rollers
Painted extruded
aluminum profiles
65
19
Grille Closed
ALUMINUM GUIDE RAIL
Guide rails in painted extruded aluminum with brushes, are composed by two parts, the guide and the casing. Thanks
to the removable casing, installation and maintenance are easy to carry out.
Guide rails are equipped with devices allowing a millimetric adjustment of parallelism and perpendicularity.
GUIDE SECTION FOR CASING
Brush seat
Width = 100 mm
Guide rail
Depth = 77 mm
Weight per lm = 3,1 kg
Adjustment device
Guide
Disassembled
fixing
Casing adjustment
screws
device
138
TAP-BLIND SHUTTER
GRILLE
In order to improve the anti-burglar resistance, Tap Blind is equipped with innovative security devices as the anti-lifting steel
chain, which pushes the shutter downwards and the tear-proof brackets which prevent the shutter from coming out the
guide rails.
Anti-lifting chains Anti-lifting chain
139
CERTIFICATION TAP-BLIND
Istituto Giordano S.p.A.

Via Rossini, 2 - 47814 Bellaria-lgea Marina (RN) - Italia
Tel. +39 0541 343030- Fax +39 0541 345540
[email protected] - www.giordano.it
PEC [email protected]
Cod. Fisc/Part. IVA 00 549 540 409 - Cap. Soc. € 1.500.000 i.v.
RE.A c/o C.C.I.A.A. (RN) 156766
Registro Imprese di Rimini n. 00 549 540 409
TEST REPORT N. 322669

Place and date of issue: Bellaria-lgea Marina - Italia, 26/02/2015
Contractor: CROCI ITALIA S.r.l. - Via Emilia, 732 - 47032 BERTINORO (FC) - Italia
Date of test request: 07/01/2015
Number and date of the order: 65254, 08/01/2015
Date of receipt of the sample: 04/02/2015
Date of execution of the test: 10/02/2015
Object of the test: burglar resistance and classification (resistance under static charge, resistance under dy-
namic charge or resistance against manual break-in) according to the regulations UNI EN 1627:2011, UNI EN
1628:2011, UNI EN 1629:2011 and UNI EN 1630:2011 about rolling shutter closure.
Test site: Istituto Giordano S.p.A. - Via Erbosa, 72 - 47043 Gatteo (FC) - Italia
Sample provenance: sample provided by the contractor
Identification of the sample at reception: n. 2015/0195
Name of the sample*.
The name of the sample tested is “TAP BLIND”.
(*) According to the contractor’s statement. LAB N° 0021
Comp. AV Page
This test report is composed of 16 pages and 1 attachment.
Revis. RP 1 of 16
CLAUSES: this document refers only to the sample or the material submitted to the test and can not be partially reproduced, unless authorized by Istituto Giordano
written approval.
140
TAP-BLIND CERTIFICATION
LAB N° 0021
Sample description*.
The sample submitted to the test consists of a blind closure, which can be opened by rolling on an horizontal upper axe, with
the following dimensions.
Total nominal width of the sample 2800 mm
Total nominal height of the sample 2600 mm
Useful width of the sample 2600 mm
Useful height of the sample 2100 mm
In detail, the sample consists of a motorized security shutter sliding vertically.

Please note that the tested sample was equipped, in the rolling shutter, with slats having a reinforcing steel bar, one every 3
slats.
For further details about the sample characteristics, please refer to the schematic drawings supplied by the Contractor, shown
in the following pages and in the “A” attachment to this document.
Finally, the sample is also equipped by a steel perimetrical frame used to adapt and fix the test facility.
(*) in accordance with the technical documents supplied by the Contractor and on the basis of the checks carried out by the
qualified personnel of this Institute.
Classification.
On the basis of the test carried out, in accordance with the results obtained and as indicated in regulations UNI EN 1627:2011,
UNI EN 1628:2011, UNI EN 1629:2011 and UNI EN 1630:2011, the examined sample, consisting of a rolling shutter closure
called “TAP BLIND” submitted by CROCI ITALIA S.r.l. - Via Emilia, 732 - 47032 BERTINORO (FC) - Italy, has passed the test
required by the laws.
Therefore, in accordance with the regulation UNI EN 1627:2011, the sample belongs to.
RC 3*
The results reported refer only to the sample tested and are valid only under the conditions existing in the moment of the test.
This test report, alone, can not be considered a certificate of conformity.
(*) The classification has been determined according to paragraph 2.6 of the regulation IIAC-GS:03/2009; for further details,
please refet to the section “Testing procedure”.
Test technician manager Building laboratory manager CEO

(Geom. Roberto Porta) (Security and Safety) (Dott. Arch. Sara Lorenza Giordano)
(Dott. Andrea Bruschi)
141
15-TRAD TAP-BLIND
VIEW
1 EXTRUDED ALUMINUM SHUTTER
2 LEFT EXTRUDED ALUMINUM GUIDE
3 LEFT EXTRUDED ALUMINUM CARTER
4 RIGHT EXTRUDED ALUMINUM GUIDE
5 RIGHT EXTRUDED ALUMINUM CARTER
6 GALVANIZED STEEL TRADITIONAL BRACKETS
7 NYLON ENTRY GUIDE

ASSEMBLED ROLL TUBE (WITH MOTOR,
8 SUPPORT, CAP, SUPPORT WITH BEARINGS
AND RINGS FOR CHAINS)
142
TAP-BLIND 15-TRAD
INTERIOR FRONTAL VIEW
OUTSIDE
INSIDE
LATERAL
SECTION
L OVERALL WIDTH
L1 NET WIDTH BETWEEN THE GUIDE RAILS (PASSAGE WIDTH)
H OVERALL HEIGHT
H1 GUIDE RAIL HEIGHT
H2 LINTEL HEIGHT (SEE TABLE)
P INTERNAL SHUTTERBOX DEPTH (SEE TABLE)
X DISTANCE BETWEEN ROLL TUBE AND LINTEL (SEE TABLE)
Y DISTANCE BETWEEN ROLL TUBE AND END OF THE GUIDE (SEE TABLE)
Width Min Max

L 75,0 cm 280,0 cm
L1 55,0 cm 260,0 cm
H H1 max H2 P Posizione rullo Y X
Up to 180 cm Up to 145,0 cm 35,0 cm 31,0 cm 1 19,5 cm 16,0 cm
From 180 to 270 cm Up to 229,5 cm 40,5 cm 36,0 cm 2 22,0 cm 19,0 cm
From 270 to 350 cm Up to 304,5 cm 45,5 cm 41,5 cm 3 24,5 cm 22,0 cm
Important: numbers 1, 2, 3 are marked on the roll brackets and are needed for identifying the right position of the roll tube.
The thickness of the lower part of the shutterbox (ceiling) should be < 4,5 cm.
The shutterbox is not furnished by Croci Italia s.r.l.
143
15-CASS TAP-BLIND
WITH INSULATED ALUMINUM SHUTTERBOX
The shutterbox consists of pre-painted aluminum shaped sheets, and two side covers (frames) in painted galvanized iron, used
as support for the lifting/winding system. The inner part of the shutterbox is covered by a polyethylene insulating sheath, 5 and
10 mm thickness, which improves thermic and acoustic insulation.
The shutterbox is available in two dimensions : a smaller one for window shutters and a bigger one for door shutters.
• Thermal transmittance bigger shutterbox = 3,7 W/(m2 K) rif. “Report n. 282751” Istituto Giordano
• Thermal transmittance smaller shutterbox = 4,0 W/(m2 K) rif. “Report n.282751 ”Istituto Giordano
1 ALUMINUM SHUTTER
INSULATED ALUMINUM SHUTTERBOX
2 (H2 = 35,5 CM FOR WINDOW AND D2 = 41 CM FOR DOOR)
3 RIGHT EXTRUDED ALUMINUM GUIDE RAIL
4 RIGHT EXTRUDED ALUMINUM CARTER
5 LEFT EXTRUDED ALUMINUM GUIDE RAIL
6 LEFT EXTRUDED ALUMINUM CARTER
144
TAP-BLIND 15-CASS

INTERIOR FRONTAL VIEW
LATERAL SHUTTERBOX INSPECTION COVER

VIEW
OUTSIDE
INSIDE
WINDOW/DOOR
Dimensions in cm
L OVERALL WIDTH
L1 NET WIDTH BETWEEN THE GUIDE RAILS (PASSAGE WIDTH)
H OVERALL HEIGHT
H1 GUIDE RAIL HEIGHT
H2 SHUTTERBOX EXTERNAL HEIGHT, LINTEL SIDE (SEE TABLE)
H3 DOOR/WINDOW MAX HEIGHT
P SHUTTERBOX EXTERNAL DEPTH (SEE TABLE)
P1 WINDOW MAX DEPTH (SEE TABLE)
Width Min Max

L 75,0 cm 280,0 cm
L1 55,0 cm 260,0 cm
H H1 max H2 P
(overall height) (guide rail height) (shutterbox height) (shutterbox depth)
Up to 180 cm Up to 144,5 cm 35,5 cm 32,0 cm
From 180 to 270 cm Up to 229,0 cm 41,0 cm 37,0 cm
145
INFO
146
INFO
TECHNICAL DATA
ALUMINUM
SHUTTERS GARAGE DOOR SHUTTERBOX
ALLOY 3005 - 3105 3005 - 3105 3005 - 3105
THICKNESS 0,27 - 0,35 0,50 0,80 - 1,00 mm
PHYSICAL PROPERTY 3005 - 3105 3005 - 3105 3005 - 3105
* Shutter box profiles are supplied with a polyethylene protection sheet to avoid damages during transport and/or installation.
All the row materials used have passed the acid salt spray test, the humidity test and other tests according to
ECCA, ASTM and DIN regulations.
COATING
COATING TYPE PU/PA FOR OUTDOOR
COATING THICKNESS 28 - 36 MICRON
The coating is polyurethane/polyammide-based, with orange-peel effect, that gives more resistance to
aggressive chemical and atmospheric agents, abrasion and UV radiations than the polyester version.
The interior part of the coil is covered by a primer layer needed to adhere perfectly to polyurethane.
Colors are subject to variations in shades and texture, tolerances impossible to avoid, thus not questionable ;
wood imitation colors are subject to tolerances in the wood grain as well.
POLYURETHANE
The polyurethane resins used are freon and odp free.
MEDIUM DENSITY PROFILES HIGH DENSITY PROFILES

POLYURETHANE DENSITY 80 - 90 Kg/m 3
280 - 300 Kg/m3
147
INFO
DECLARATION OF PERFORMANCE N.1 - 2018

Croci Italia S.r.l. with its headquarter in Bertinoro (FC - Italia), Via Emilia, 732, P. IVA 04087390409
1. Rolling shutter identified as follows :
- AR-28, AR-37, U-37, AR-17, U-45, U,50, AR-32 - ALUMINUM ROLLING SHUTTERS WITH MEDIUM DENSITY FOAM
- SAR-117, SAR-132 - ALUMINUM SECURITY ROLLING SHUTTERS WITH HIGH DENSITY FOAM
- AC-55 - STEEL SECURITY ROLLING SHUTTERS WITH MEDIUM DENSITY FOAM
- SAR-115, ES-55, ES-44, ES-28 - EXTRUDED ALUMINUM SECURITY SHUTTERS
2. Not applicable
3. Intended use:
External use.
4. Manufacturer:
Croci Italia S.r.l.

registered office and production Via Emilia, 732 - Bertinoro (FC) Italy,
P. IVA 04087390409
E-mail: [email protected]
5. Not applicable
6. Assessment and verification of constancy of performance.
system 4
7. Not applicable
8. Not applicable
9. Declared performance
A. Classification of wind resistance in accordance to UNI EN 13659:09

CLASSE 0 1 2 3 4 5 6
Nominal pressure (N/mq) <50 50 70 100 170 270 400
Safety pressure (N/mq) <75 75 100 150 250 400 600
Class of wind resistance related to sizes***

CLASSIFICATION TO WIND RESISTANCE
FINISHED WIDTH *** OF ROLLING SHUTTERS (cm)
PROFILE GUIDE RAIL 520 490 460 430 400 370 340 310 280 250 220 190 160 130
TYPE A 0 0 0 0 0 0 1 2 3 4 5 6 6* 6*
AR-28
TYPE B 0 0 0 0 0 0 1 2 3 4 5 6 6* 6*
TYPE A 0 0 0 0 0 1 2 2 3 3 4 5 6 6*
SAR-117
TYPE B 0 0 0 0 0 1 2 2 3 3 4 5 6 6*
TYPE A 0 0 0 0 0 0 1 1 2 3 3 4 5 6
AR-37 U-37
TYPE B 0 0 0 0 0 0 1 1 2 3 4 5 5 6
TYPE A 0 0 0 0 0 0 1 1 2 3 4 5 6 6*
AR-17 U-45
TYPE B 0 0 0 0 0 0 1 2 3 4 4 5 6 6*
TYPE A 0 0 0 0 0 1 2 2 3 3 4 5 5 6
U-50
TYPE B 0 0 0 0 0 1 2 2 3 3 4 5 5 6
TYPE A 0 0 0 0 1 2 3 4 4 5 6 6* 6* 6*
ES-44
TYPE B 0 0 0 0 1 2 3 4 4 5 6 6* 6* 6*
TYPE A 0 1 2 2 3 3 3 4 5 6 6* 6* 6* 6*
ES-28
TYPE B 0 1 2 2 3 3 4 5 6 6 6* 6* 6* 6*
GUIDE TYPE A: GE28X27, GE26X21, GE53X21(A) GE53X28R
GUIDE TYPE B: GE35X21, GE40X21, GE62X21
148
INFO
CLASSIFICATION OF WIND RESISTANCE

FINISHED WIDTH ** OF ROLLING SHUTTERS (cm)
PROFILE GUIDE RAIL 580 550 520 490 460 430 400 370 340 310 280 250 220 190
TYPE C 0 0 0 0 1 1 2 2 3 3 4 4 5 6
SAR-132
TYPE D 0 0 0 0 1 1 2 2 3 3 4 4 5 6
TYPE C 0 0 0 0 0 1 1 2 2 3 4 4 5 6
AR-32
TYPE D 0 0 0 0 0 1 2 2 3 3 4 5 5 6
TYPE C 0 0 0 0 1 2 3 3 4 5 5 6 6* 6*
AC-55
TYPE D 0 0 0 0 1 2 3 3 4 5 6 6* 6* 6*
TYPE C 0 1 1 1 2 2 3 3 4 5 5 6 6* 6*
ES-55
TYPE D 0 1 1 2 3 3 4 4 4 5 5 6 6* 6*
TYPE C 0 1 1 2 3 3 3 3 4 5 5 6 6* 6*
SAR-115
TYPE D 0 1 2 2 3 3 4 4 4 5 5 6 6* 6*
GUIDE TYPE C: GS28X17, GE30X27, GE30X25, GE30X19
GUIDE TYPE D: GE40X27, GE60X28, GE458028, GE80X28
Note:
Classe 0: no wind resistance (rolling shutter profile not classifiable) Result obtained with deductive method
Indicated classes are not applicable to rolling shutters with projection frames.
** “Finished width size” means the width of rolling shutters including side plugs.
*** Test performed in accordance to UNI EN 1932:2013
To identify the product (rolling shutter profile, guide rail) refer to Croci Italia S.r.l. general catalogue.
B. Solar transmittance G-TOT

Material: pre-painted and insulated aluminum - Painted extruded aluminum - Pre-painted and insulated steel
Solar transmittance : Te 0% (UNI EN 14500:2006)
Glass used : type C (UNI EN 14501) - Ug: 1,2 W/m²k p e: 0,29 Te: 0,49 gv: 0,59
Data processed in accordance to UNI EN ISO 52022-1:2018 and classification of performance in accordance to UNI EN 14501
Closed rolling shutter

SLAT COLOR WHITE PASTEL DARK BLACK
G-TOT VALUE 0,05 0,08 0,11 0,14
CLASSE UNI EN 14501 4 4 4 4
C. Additional thermal resistance*

Air permeability classification
HIGH MEDIUM LOW VERY LOW**
ALUMINUM 0,0913 0,113 0,114 0,175
STEEL 0,0955 0,122 0,158 0,192
* resulted in accordance to UNI EN 10077-1 according to the air permeability norm UNI EN 13125.
** it means “airtight” with hidden guide rails and shutterbox with joint
10. The performances of the product identified in points 1 and 2 is in conformity with the declared performance in point 9.
This declaration of performance is issued under the sole responsibility of the manufacturer.
Croci Italia Srl
Bertinoro, 01/09/2018
149
INFO
GENERAL SALES CONDITIONS
1) WRITTEN APPROVAL OF THE ORDER

The orders, even if sent through an agent, shall not be binding for Croci Italia Srl without written approval of Croci Italia Srl. They shall
only include what expressly stated and they shall be regulated by our sales conditions only.
2) EFFECTIVENESS OF SALES CONDITIONS

In case of changes of the production costs between the date of order and the date of delivery of the goods, Croci Italia Srl can change
the agreed prices. Where the prices in the order confirmation are different from those in the order, they are considered accepted if not
contested within 3 days from transmission of the confirmation.
3) TERMS OF DELIVERY
The foreseen terms of production and delivery of the goods are approximate, even if indicated in the order confirmation. Croci Italia Srl is
not responsible for any eventual delay caused by “Force Majeure” or any other reason which is not completely caused by the seller. It’s
excluded that the delay can give the buyer the right to claim damages and/or to resolve the contract. The buyer is allowed to withdraw
if the delay exceeds 60 days from the foreseen delivery date. The delivery of the products can be made through partial consignments.
4) FORMS OF DISPATCH
The goods travel at the buyers risk and danger, whatever indications there are in the order confirmation. Whenever the transport should
be provided by the buyer, the buyer is responsible for eventual consequences deriving from the delay in delivery caused by himself,
compared to what Croci Italia Srl pre- advised in writing. Croci Italia Srl considers the contract resolved after 30 days from the foreseen
date of delivery to the transporter. The goods are always considered delivered ex works Bertinoro if nothing else is specified and
contained in the order confirmation.
5) RETENTION OF TITLE
The delivered goods remain our property until the entire payment of the same has been effected. Until then, the buyer is not authorised
to pledge it or to give it as a security for a credit.
The buyer is obliged to take the best possible care of the conservation of the goods which is considered to be temporary deposited
free of charge by himself and he is responsible for eventual theft or loss even if not caused by his fault.
6) CLAIM
Any single complaint regarding a single consignment does not influence the contract concerning the following deliveries. The buyer will
examine and control the goods rapidly and carefully. Eventual claims regarding the quantity, the specimen or the type of the goods
delivered must be denounced by the buyer immediately during the reception of the goods indicating the claim on the consignment
bill as the transporter could be involved as far as responsibility is concerned. The buyer must in any case communicate the lack or
non conformity to Croci Italia Srl by recommended letter within 8 days from the reception of the goods. Even if according to the buyer
failures, defects or delays has occurred he has no right (not even in court) to suspend the payments, all in Croci Italia Srl’s advantage
according to article 1462, point 1 (Italian civil law).
7) AUTHORISATION RETURN OF GOODS

Return of goods without our anticipated written authorisation are not accepted. Even if authorised, the cost and risk of transport of
returned goods shall always be on the buyers account.
8) TERMS OF PAYMENTS - NON FULFILMENT

The payment (to be effected by cash or banker’s draft) is supposed to be at the delivery if nothing else is specified on the order
confirmation and on the invoice. The payment by means of cheque without the anticipated authorisation of Croci Italia Srl is not
accepted.
Payment of supplies must be made to our head office in Bertinoro. The debtor shall be responsible for the risk of transmission of the
sums, whatever means chosen.
Charges concerning possible outstanding amounts should be paid by the customers. Interest on arrears at the six-monthly rate for
financing (established by BCE) plus 7% shall be applied to delayed payments.
In case of deferred payment, previously agreed, the possible payment delay over 10 days, allows Croci Italia Srl to collect immediately
the payment of the total amount of the order.
9) PACKAGING
Croci Italia Srl provides for packaging according to its own experience and habit, remaining expressly without any responsibility for any
average or loss. Eventual special packaging requested by the buyer will be charged for.
150
INFO
10) ILLUSTRATIONS, DATES AND WEIGHTS

Croci Italia Srl reserves itself the right to make any opportune and convenient changes in the catalogue at any time. The illustrations,
dates and weights in the present pricelist and in the catalogue are therefore not to be considered as binding but only indicative.
11) WARRANTY
The products of Croci are guaranteed for two years in accordance with the law under the following conditions:
- The warranty runs from the purchase date, certified by the commercial invoice or delivery document issued by Croci Italia Srl.
- The warranty refers only defects directly due to Croci.
- The warranty refers only to replacement of goods recognised by us as defected in the origin by production defects, any other
additional cost is excluded.
- Eventual defects or not correct functions caused by a non correct use and/or by non correct mounting and/or installation and/or
transport effected without necessary care are excluded from the warranty.
- Defects and not correct functions caused by a not correct maintenance are excluded.
12) APPLICATION OF THE SALES CONDITIONS

Croci Italia Srl and the buyer agree that the sales that will be stipulated between the two of them, with subject to products produced
and commercialised by Croci Italia Srl, automatically will be regulated, in force of the signing of this agreement, by the norms contained
in the general sales conditions here listed.
13) COMPETENT AUTHORITY

The competent authority for any controversy or divergent opinion that involves Croci Italia Srl, is the court of Forlì.
151
TECHNIQUE TO STAND OUT
Leader in the field of security shutters, the company provides its partners with numerous resources to
optimize the work and stand out on the market.
LOCKING SYSTEMS
THAT OPEN UP A WORLD FOR YOU
OPPORTUNITY
With its exclusive and successful products, appreciated all over the world, Croci offers a heritage
of high added value to your customers and your business.
CROCI Italia S.r.l.
Via Emilia, 732 - 47032 Bertinoro (FC) - ITALIA - tel. +39 0543 463911 - www.croci.com

Catalogo Generale Croci Eng Ok

Uploaded by

Copyright:

Available Formats

Catalogo Generale Croci Eng Ok

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Catalogo Generale Croci Eng Ok

Uploaded by

Copyright:

Available Formats

THE SAFETY

The company works with a constant

ALUMINUM PROFILES WITH HIGH DENSITY FOAM ARIALUX 50

EXTRUDED ALUMINUM PROFILES PAGE

END SLATS PAGE

EXTRUDED ALUMINUM GUIDE RAILS PAGE

OPERATIONS SYSTEMS PAGE

Standard packing: 30 slats 6,5lm

Assembled rolling shutter (punched)

SHUTTER HEIGHT (mm) - with anti-lifting system SEC

OPENING HEIGHT FOR SHUTTERBOX UNIBOX

137 150 165 180 205 230

SUITABLE GUIDE RAILS (PAGE 34- PAGE 72)

SUITABLE END SLATS (PAGE 30)

TE7X56 Extruded aluminum end slat 7,5x56mm

SUITABLE SECURITY ACCESSORIES (PAGE 45)

10 WHITE 11 RAL 9010 25 WHITE*

Standard end slat TE7X56

FREE ODP FREON UNI EN 13659:2009

Max sizes: Max width 4,60m;

Standard packing: 15 slats 6,5lm

Assembled rolling shutter (punched)

SHUTTER HEIGHT (mm) - with anti-lifting system SEC

OPENING HEIGHT FOR SHUTTERBOX UNIBOX

137 150 165 180 205 230 250 300

SUITABLE GUIDE RAILS (PAGE 34- PAGE 72)

SUITABLE END SLATS (PAGE 30)

TS12X55 Extruded aluminum end slat 12x55mm

SUITABLE SECURITY ACCESSORIES (PAGE 45)

10 WHITE 11 RAL 9010 25 WHITE

Standard end slat TS12X55

Max sizes: Max width:3,40lm

Standard packing: 50 slats 6,50lm

SHUTTER HEIGHT (mm) - with anti-lifting system SEC

OPENING HEIGHT FOR SHUTTERBOX UNIBOX

137 150 165 180 205 230

SUITABLE GUIDE RAILS (PAGE 34- PAGE 72)

SUITABLE END SLATS (PAGE 30)

TE7X56 Extruded aluminum end slat 7,5x56mm

SUITABLE SECURITY ACCESSORIES (PAGE 45)

10 WHITE 11 RAL 9010

15 IVORY 29 BEIGE 31 GREY 33 METALL. 34 BROWN 42 GREEN 81 GREY

38 WOOD 39 WOOD 44 BROWN 59 BLACK *85 LIGHT 95 TRAFFIC

Standard end slat TE7X56

FREE ODP FREON UNI EN 13659:2009

Max sizes: Max width:3,40lm

Standard packing: 50 slats 6,50lm

SHUTTER HEIGHT (mm) - with anti-lifting system SEC

OPENING HEIGHT FOR SHUTTERBOX UNIBOX

137 150 165 180 205 230

ROLL TUBE 60MM 1110 1510 1990 2440 2500

SUITABLE GUIDE RAILS (PAGE 34- PAGE 72)

SUITABLE END SLATS (PAGE 30)

TE7X56 Extruded aluminum end slat 7,5x56mm

SUITABLE SECURITY ACCESSORIES (PAGE 45)

10 WHITE 11 RAL 9010

15 IVORY 29 BEIGE 31 GREY 33 METALL. 34 BROWN 42 GREEN 81 GREY

38 WOOD 39 WOOD 44 BROWN 59 BLACK 85 LIGHT 95 TRAFFIC

Standard end slat TE7X56