A

Project Report
on

RFXX BASED XXXXXX MACHINE

by

Abcdef Sharma (0809720XXX)

Mnopq Rajpoot (0809720XXX)
Rpqrst Yadav (0809720XXX)

DEPARTMENT OF ELECTRICAL ENGINEERING

GALGOTIAS COLLEGE OF
ENGINEERING AND TECHNOLOGY
GREATER NOIDA
(MAY/JUNE 2022)
 A
Project Report
on

RFXX BASED XXXXXX MACHINE

Submitted
In partial fulfillment of the requirements for the degree of

Bachelor of Technology
in
ELECTRICAL ENGINEERING

by
Abcdef Sharma (0813321XXX)
Mnopq Rajpoot (0813321XXX)
Rpqrst Yadav (0813321XXX)

Under the Guidance of

XYZABC
DEPARTMENT OF ELECTRICAL ENGINEERING
GALGOTIAS COLLEGE OF
ENGINEERING AND TECHNOLOGY
[2018 – 2022]
 CERTIFICATE

This is to certify that the project entitled “RFXX BASED XXXXXX MACHINE” has been carried
out by the team given below under my guidance in partial fulfillment of the degree of Bachelor of
Technology in ELECTRICAL ENGINEERING during the academic year 2021-2022 (8th Sem).

Team:

Abcdef Sharma (0809720XXX)

Mnopq Rajpoot (0809720XXX)
Rpqrst Yadav (0809720XXX)

Date:
Place:

(XYZABC) Dr.Pinki Yadav Dr. Md. Danish Equbal

Project Guide Project Coordinator HoD, EE
 DECLARATION BY CANDIDATE

I hereby declare that the Project report entitled”………………..”submitted by me to

Galgotia College of Engineering and Technology in partial fulfillment of the requirement for
the award of the degree of B.Tech in “Electrical Engineering Department” is a record of
bonafide project work carried out by me under the guidance of ……….....I further declare
that the work reported in this project has not been submitted either in part or in full, for the
award of any other degree or diploma in this institute or any other institute or university.

Signature of the Candidate

Date:

Place:
 ACKNOWLEDGEMENT

Acknowledgement should be prepared by their wordings showing their gratitude

towards department. ………..

Abcdef Sharma (0809720XXX)

Mnopq Rajpoot (0809720XXX)
Rpqrst (0809720XXX)
 PAGE INDEX

Topic Page No.

ABSTRACT

1. TITLE OF CHAPTER ONE

1.1 HEADING
1.2 HEADING

2. TITLE OF CHAPTER TWO

2.1 HEADING
2.2 HEADING
:
:
:
:
:
N-1
N. CONCLUSION
BIBLIOGRAPHY
APPENDIX – A USER MANUAL
APPENDIX – B SNAP SHOTS OF GUI/RESULT
APPENDIX – C
 TABLE INDEX
Table Page No.

1.1 Table 1 About

1.2 Table 2 About

2.1 Table 3 About

2.2 Table 4 About
: :
: :
: :
N Table N About
 FIGURE INDEX

Figure Page No.

1.1 Figure 1 About

1.2 Figure 2 About

2.1 Figure 3 About

2.2 Figure 4 About
: :
: :
: :
N Figure N About
Main Text in form of chapters as mentioned in Table of Contents
 References

[1] Don Box, “Design of Compiler for Mobile Environment and it’s formalization
using Evolving Algebra ”, proceedings of 3rd IEEE International Conference on
Mobile Data Management, Singapore, January 2002S, PP 159-160.
[2] “Author Guidelines”, http://.computer.org/cspress/instruct.htm

[3] William Stallings, “Cryptography and Network Security: Principles and Practices”,
Pearson Education, Third Edition

Note: Strictly follow the above format for bibliography.

 FORMAT OF PROJECT REPORT

1. Paper Size : A- 4 size bond paper

2. Margins :
Top : 1” (1 inch=2.54cm)
Bottom : 1.15” (2.86cm)
Left : 1.5”
Right : 0.6”

3. Line Spacing: 1.5 line

4. Title of Chapter
Font : Times New Roman ( Bold face)
Size : 18 point
Alignment : Right Alignment
One thick line (2¼ point weight) after the name of chapter

5. Headings
First Order Heading: (for example – 1. NTRODUCTION)
Font : Times New Roman (Bold Face)
Size : 16 point
One blank line before the heading (12 points)

Second Order Heading: (for example – 1.1. Evolution)

Font : Times New Roman ( Bold Face)
Size : 15 point
One blank line before the heading (12 points)

Third Order Heading: (for example – 1.1.1. Image Processing)

Font : Times New Roman (Bold Face)
Size : 14 point
One blank line before the heading (12 points)
6. Text
Font : Times New Roman
Size : 14 point
Line Indent : First line of every paragraph should be indented
By 1 cm. (Except first paragraph *)
* No indent should be applied to first line of first paragraph under any Heading /
Sub-Heading
 Alignment : Justified (Full Text)

7. Abstract ( up to 150 words)

Heading (i.e. ABSTRACT)
Font : Times New Roman (Bold Face)
Size : 16 point
Two blank lines after the heading. (12 points)

Remaining Text
Font : Times New Roman ( Italic Face )
Size : 14 point
Alignment : Justified (Full Text)
8. Figures and Tables : Centered Placed
Caption
Font : Garamond (Bold)
Size : 12 point
Alignment : Centered
Figure Caption must be bellow the figure and centered, Table caption must
be above the table and centered.

9. Page Numbering (Centered)

Till page, “FIGURE INDEX” : Roman (I, II, etc.)

For Remaining Pages

(i.e. from ABSTRACT -to- BIBLIOGRAPHY) : 1, 2, …… N

10. References / Bibliography

Line Spacing : 1.5 Line
Font : Times New Roman
Size : 14 point
Publication details and/or URL must be in Italics.
Format:
[Citation number] Author’s Name, “Article Title”, Journal, Publisher,
Location, Year, Edition/Reprint, PP Page No Start-End.
[Citation number] Author’s Name, “Article Title”, Complete URL of Web Page.
[Citation number] Author’s Name, “Title of the Book”, Publication, Edition, Year of
Printing.
Header: Title- K C E S C O E I T, Jalagon
Font -Right hand - Times New Roman
Size - 14 point

 No header should be applied to cover page, front page, index, abstract,

bibliography.

Footer : Title-left hand- Project title

Right hand-page no (only integer)
Font - Times New Roman
Size - 14 point
Note :

1. Project Report must be Black colored Hard Bounded & Golden Embossed
lettering and printed in Duplicate (i.e. Two Copies).
2. Two copies of the report should be submitted to the college (One for Central
Library and One for Departmental Library). Copy to the respective guide is
optional. Every student of the group may have their own additional copy.
3. In College copy and guide copy, Name of all the students in that group must be
there in Cover page, First page, Certificate and in Acknowledgement. Personal
copy of the students must contain their own name only in Cover page, First page,
Certificate and in Acknowledgement.
4. Report must be written in your own English language.
5. Abstract should be not more than One Page.
6. Report must be submitted at the time of presentation (Two copies).
7. “Cover Page, First Page, Specimen Copy “ words are only for students
instruction, they are not be printed in the report.
8. Sequence of pages to be followed as:
i) Cover page
ii) First page
iii) Certificate
iv) Project approval sheet
 v) Acknowledgement
vi) Page Index
vii) Table Index
viii) Figure Index
ix) Abstract
x) Theory
xi) Conclusion
xii) Bibliography
xiii) Appendices
9. Sequence of Theory may be as follows:
1. Introduction
1.1 Need for the New system
1.2 Detailed Problem Definition
1.3 Project Scope
1.4 Presently Available Systems for the same
1.5 Future Prospects
1.6 Organization of the Report
2. Analysis
2.1 Project Plan
2.1.1 Task Identification Plan
2.1.2 Environmental Resources
2.1.3 Database Design
2.2 Feasibility Study
2.2.1 Technical Feasibility
2.2.2 Financial Feasibility
2.2.3 Resources Feasibility
2.3 Team Structure

3 Design
3.1 Software Requirement Specification
3.2 Risk Assessment
3.2.1 Performance Risk
3.2.2 Cost Risks
3.2.3 Support Risks
 3.2.4 Schedule Risks
4. Modeling
4.1 UML Diagrams
4.1.1 USE CASE Diagram
4.1.2 Activity Diagram
4.1.2.1---------------
4.1.2.2---------------

4.1.3 Sequence Diagram

4.1.4 Collaboration Diagram
4.1.5 VOPC Diagram
4.1.6 Deployment Diagram
5 Coding
5.1 Hardware Specification
5.2 Platform
5.3 Programming Languages Used
5.4 Coding Style Followed
5.5 System Calls

6. Testing
6.1 Formal Technical Review
6.2 Test Plan
6.3 Test cases and Test Results
6.3.1 Unit Testing
6.3.2 Integration Testing
7. Software Cost Estimation
8. Limitations & Scope
 CHAPTER – 2
IMAGE PROCESSING

1. INTRODUCTION
Work Flow management is a fast evolving technology which is increasingly being
exploited by businesses and in a variety of industries.
Its primary characteristics is the automation of process involving combinations
of human and machine based activities, particularly those involving interaction with IT
applications and tools. Although its most prevalent use is within the office
environment in staff intensive operations such as insurance, banking, legal and general
administration, etc. it is also applicable to some classes of industrial and
manufacturing.
1.1. The Evolution of Workflow
Many types of product in the IT market have supported aspects of workflow
functionality.
1.1.1. Image Processing
Workflow has been closely associated with image systems and many image systems
have workflow capability either built-in or supplied in conjunction with a specific
workflow product.
1.1.2. Document Management
Document management technology is concerned with managing the lifecycle of
electronic documents.
1.1.3. Electronic Mail and Directories
Electronic mail provides powerful facility for distributing information between
individuals within an organization or between organizations. Thus electronic mail
systems have themselves been progressing towards workflow functionality through the
proper channel.