0% found this document useful (0 votes)
29 views12 pages

Viavi: Third Generation Multiple Application Platform (MAP-300)

Optical measuring equipment of VIAVI

Uploaded by

Dương Phan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
29 views12 pages

Viavi: Third Generation Multiple Application Platform (MAP-300)

Optical measuring equipment of VIAVI

Uploaded by

Dương Phan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 12

Data Sheet VIAVI Solutions

VIAVI
Third Generation Multiple Application
Platform (MAP-300)
The VIAVI Solutions Multiple Application Platform (MAP-300) is
an optical test and measurement platform optimized for compact
cost-effective development and manufacturing of optical
communications technology.
From the original Multiple Application Platform (MAP)
Key Features
system released in 2001 as part of JDSU to the new
y Available in rackmount, reverse-rackmount and
third generation MAP-300 Series, the MAP system is benchtop mainframe configurations
the heart of the VIAVI optical test solutions for labs and y HTML-based graphical user interface gives consistent
manufacturing. With unmatched scalability, users can be user experience both locally and remotely

assured that our solutions will meet their current and y Field-replaceable controller includes an integrated 3.5-
inch LCD touchscreen for network and system status
future needs. MAP-300 provides the foundation to our
y Support for USB 3.0 port, 15.6-inch external monitor,
entire portfolio, enabling scalability and efficiency for and ethernet
manufacturing optical network elements, modules and y Optional GPIB, additional ethernet ports and
additional USB and trigger modules
components.
y SCPI logical interface for automation programming,
with remote programming supported via TCP/IP (LXI)
Customer Focused Innovation over ethernet, GPIB and direct socket

The new MAP-300 builds upon the proven strengths y Multi-user capability
y Backward compatible with MAP2xx series cassettes
of the MAP System while adding innovation where it
and remote-control support
matters most for our customers. Backwards compatible
y Hot swappable modules
support for the installed automation base, combined y Supports the MAP-Series asset management
with several new features, including an HTML-based GUI tool MAPcc
for multi-user environments, gives our customers the Applications
capabilities they need to achieve their goals. We can’t y General purpose fiber-optic lab use
wait to see what you will accomplish with the y Manufacturing test automation
new MAP-300! y DWDM/WSS test
y Connectivity IL/RL
y Polarization scrambling and OSNR

Compliance
y MAP Series cassettes include amplifier and source
cassettes classified as either Class 3B or Class 1M Laser
products. While operating in a MAP Series mainframe,
cassettes meet the requirements of the IEC 60825-1
standard and comply with 21 CFR 1040.10 and 1040.11,
except for deviations pursuant to Laser Notice 50,
dated June 24, 2007.
MAP-300 Configurations
The MAP-300 mainframe, like its predecessor, is offered in both benchtop and rackmount versions as either three
or eight slot mainframe configurations. The eight-slot can also provided in a reverse rack-mount configuration.

Benchtop Rackmount and Reverse-Rackmount


Because each lab bench is unique, the MAP-300 chassis The chassis can be ordered in front- or rear-module
can be flexibly deployed in the space available. Easily entry rackmount configurations (reverse-rackmount
stackable with simple, intuitive flip-up feet for easier only available for the 8-slot chassis). Rackmount
positioning. The touch screen display’s orientation- configurations ship in kits containing all necessary
sensing ability enables positioning the chassis for use mounting hardware. Conversion kits are available for
vertically or horizontally. mounting benchtop configurations.

MAP-380 Eight-Slot Mainframes


Each MAP-380 mainframe consists of a 3U chassis that can house up to eight cassettes, plus a field-
replaceable controller. The MAP-380 mainframe is available in rackmount, reverse-rackmount, and benchtop
configurations.

Figure 1 - MAP-380 rackmount and benchtop mainframes front view

Figure 2 - MAP-380 rackmount and benchtop mainframes, rear view

Figure 3 - MAP-380 reverse rackmount mainframes, front and rear view

2 Third Generation Multiple Application Platform (MAP-300)


MAP-330 Three-Slot Mainframes
Each MAP-330 mainframe consists of a 3U chassis that can house up to three cassettes, plus a field-replaceable
controller. The rackmount versions are half 19” rack wide, so two units can be mounted side-by-side. An optional
touch screen can be docked on the mainframe of a benchtop three-slot chassis for an easy portable, self-contained
system.

Figure 4 - MAP-330 benchtop mainframe, front and rear view

Figure 5 - MAP-330 benchtop mainframe with 15.6-inch touchscreen docked, front view

Figure 6 - MAP-330 3U half 19-inch rackmount mainframe, front view

3 Third Generation Multiple Application Platform (MAP-300)


Simple, Intuitive Graphical Controller
The MAP-300 chassis includes a 3.5-inch touch screen that supports intuitive swipes for easy navigation. This
local touchscreen provides access to connection and configuration settings.

Figure 7 - MAP-300 local touchscreen

Users can access the MAP-300 GUI from a mainframe locally or remotely via Ethernet. The MAP-300 GUI allows
multi-user access via a supported web browser by entering the IP address acquired from the controller in the
location field of the web browser. The slot configuration of a mainframe is represented by widgets (one per slot)
on the MAP-300 dashboard. When a slot is populated, the widget representing that slot identifies the cassette
and provides quick access to the main device settings. The user can change the size of the widget to see more
detail on specific cassettes. A detailed view of a cassette is available, whilst still having a complete view of all
other slots.

Figure 8 - MAP-380 Dashboard GUI example.

The settings panel gives you access to network and system settings, as well as remote chassis and license
settings if available. The MAP-300 can be rebooted or placed in standby mode using through the GUI or local
touchscreen.

4 Third Generation Multiple Application Platform (MAP-300)


Control Interfaces
As a full-fledged member of the MAP family, all remote interfaces can interoperate with the three-slot and
eight-slot versions. It includes optimized Interchangeable Virtual Instrument (IVI) drivers for ease of use with
popular application-development environments, such as LabVIEW, Visual C++, Visual Basic, and LabWindows™,
to provide full control of the modules and drop-in instrument programming capabilities. These capabilities let
test programmers focus on test-level functions and sequences rather than the details required to communicate
with the specific modules in the MAP system. The IVI drivers also include a simulation mode that lets developers
capture system configurations so they can perform most of their development offline, freeing hardware for other
purposes. These features make test automation development and debugging fast and easy. All MAP series module
and platform commands conform to the Standard Commands for Programmable Instruments (SCPI) command
language.
Automation Remote Use 1 Automation Remote Use 2 Automation Remote Use 3
(Optional) (Optional) (Optional)

Equipment
Server

Network
LAN Connection

MAP-380 MAP-380

Automation Local User


(Optional) Optical Optical
Connections Connections

Extensive Input/Output Interfaces


All mainframe configurations include:

y Ethernet port for remote communication.

y 4 USB host ports for installing peripheral devices, including USB drives, a mouse, and a keyboard.

y One USB host port for the optional touchscreen.

y Integrated 3.5-inch LCD touchscreen for network and system status information.

y All mainframes can support up to two field-installable additional accessory modules for control and triggering.
Available modules include (1) IEEE-488 (GPIB), (2) dual trigger LXI-compliant LDVS driver ports, and (3) three USB
3.0 ports and one Ethernet interface.

Users who are comfortable with the General Purpose Interface Bus (GPIB)
remote interface can order the field-installable option at any time.

5 Third Generation Multiple Application Platform (MAP-300)


MAP Control Center (MAPcc)
VIAVI now offers the MAP Control Center (MAPcc), an asset management tool for MAP mainframes and cassettes.
The MAPcc simplifies network management via a single screen that lists a full inventory of all your assets, enabling
you to explore internal and external mainframes as well as the cassettes present in those mainframes. From the list of
available mainframes, you can retrieve IP addresses, firmware versions and serial numbers, and you can search for a
specific type of cassette, fiber or connector. The MAPcc lets you upgrade multiple mainframes at the same time using
the upgrade center, as well as retrieve log files.

6 Third Generation Multiple Application Platform (MAP-300)


MAP Chassis Selection Guide
VIAVI offers a variation of chassis, the table below summaries their key attributes of each chassis and why it would
be ideal for you.

Field
Modular Controller Super Optional Remote Optional Plug-in
Chassis Configuration Size Modular Slots Replaceable
Family Touchscreen Apps Touchscreen Control Modules
Controller

USB 15.6-in
display,
3U, 3.5-in 1920X1080
Benchtop and
MAP-330 ½ 19” 3 touchscreen resolution.
Rackmount
rack for network/ Docks to
system benchtop
LightDirect controls GPIB, USB/LAN,
and Yes Yes Ethernet Yes Expansion, LXI
LightTest USB 15.6-in Trigger
display,
Benchtop,
3U, 320 X 240 1920X1080
Rackmount
MAP-380 19” 8 resolution resolution.
and Reverse
rack Does not
Rackmount
dock

Benchtop,
2U,
LightDirect Rackmount
MAP-220C ½ 19” Yes 2 Yes
Only and Reverse
rack
Rackmount

3.5-in
2U, NA touchscreen
Benchtop and
MAP-202C ½ 19” < 75 that replaces No No Ethernet GPIB
Rackmount
rack ports the need for
a PC
mISW-C1
Optical No No
Switch only

Benchtop 4U, NA
MAP-204C and Reverse 19” < 160
Rackmount rack ports

7 Third Generation Multiple Application Platform (MAP-300)


Specifications

Mainframe Specifications
The table below provides specifications for MAP-300 mainframes. For MAP Series cassettes, refer to the user
guide for each cassette.
Parameters MAP-330 MAP-380
Mainframe Chassis
Capacity (Single-width cassettes) 3 cassettes 8 cassettes
Rackmount Kit Optional
Benchtop Kit Optional
Controller (MAP-300CLD-B)
Operating System Linux
Local Touchscreen 3.5-in touchscreen for network/system status controls, 320 x 240 resolution
Power Supply 100 to 240 V AC, 50/60 Hz, Auto-switching
Power Consumption 450 VA MAX 450 VA MAX
Field Replaceable Yes
Bays for Plug-in Modules 2
Native Ports/Interfaces
USB 3.0 Host 1 front
USB 3.0 (Mouse, Keyboard, etc.) 4 rear
Ethernet 10/100/1000BASE-T 1 rear
Monitor port 1 rear
Optical Plug-in Modules GPIB, USB/LAN Expansion, Trigger
Automation
Driver Type IVI compliant
Standard/Protocol LXI, VXI-11, SCPI
LabView , LabWindowsTM, Microsoft® Visual C++,
TM
Driver Compatibility
Microsoft® Visual Basic®
Accessibility Multiuser sharing support
Web GUI Compatibility Google Chrome, Mozilla Firefox or Microsoft Edge
Laser Interlock (See the MAP Series Safety and Compliance Reference Guide, 22112369-325, for more information.)
Local Interlock Software controlled
Remote Interlock 2-pin terminal block at rear controller
Mechanical
Dimensions of rackmount 24.61 x 13.26 x 38.63 cm 48.26 x 13.26 x 38.63 cm
(W x H x D) (9.6 x 5.2 x 15.2 in) (19 x 5.2 x 15.2 in)
Dimensions of benchmount 26.43 x 15.49 x 44.27 cm 46.94 x 15.49 x 44.27 cm
(W x H x D) (10.4 x 6.1 x 17.5 in) (18.5 x 6.1 x 17.5 in)
Weight
Benchtop Mainframe 10 kg (22 lb) 12.6 kg (27.7 lb)
Rackmount Mainframe 7.4 kg (16.3 lb) 10.8 kg (23.8 lb)
Environment
Operating Temperature 0 to 50°C
Storage Temperature -30 to 60°C
Relative Humidity 5% to 85% non-condensing
8 Third Generation Multiple Application Platform (MAP-300)
Optional 15.6-inch Touchscreen (MAP-300AKD) Specifications

Parameter Specification
Dimensions 16-in x 9-in
Resolution 1080p (1920x1080)
Dock to Benchtop Mainframe
MAP-330 Supported
MAP-380 Not Supported
Power/Interface to Mainframe
MAP-330 USB cable or docking connector
MAP-380 USB cable
Weight 2.7 kg (5.95 lb)

Ordering Information
For more information on this or other products and their availability, please contact your local VIAVI account
manager or VIAVI directly at 1-844-GO-VIAVI (1-844-468-4284) or to reach the VIAVI office nearest you, visit
viavisolutions.com/contacts.

MAP-300 Mainframes

Chassis Slot Number Description Part Number


Three-Slot Mainframe MAP-330A 3 Slot 3U 19-in LightTest MAP-330AB-B
Basic Mainframe
MAP-330A 3 Slot 3U Half 19-in LightTest MAP-330A-B
Benchtop Mainframe
MAP-330A 3 Slot 3U Half 19-in LightTest MAP-330AD-B
Benchtop Mainframe with Touchscreen
MAP-330A 3 Slot 3U Half 19-in LightTest MAP-330AX-B
Rackmount Mainframe
Eight-Slot Mainframe MAP-380A 8 Slot 3U 19-in LightTest MAP-380A-B
Benchtop Mainframe
MAP-380A 8 Slot 3U 19-in LightTest MAP-380AX-B
Rackmount Mainframe
MAP-380A 8 Slot 3U 19-in LightTest Reverse MAP-380AXR-B
Rackmount Mainframe

9 Third Generation Multiple Application Platform (MAP-300)


MAP-300 Accessories and Replacement Parts

Category Description Part Number


Plug-in modules MAP-300A GPIB Plug-in Module MAP-300AGPIB
MAP-300A Trigger Module MAP-300ATRIG
MAP-300 USB-LAN Expansion Module MAP-300AUSBLAN
Replacement MAP-330 Basic Chassis, No Controller MAP-330CH
Equipment MAP-380 Basic Chassis, No Controller MAP-380CH
MAP-380 Reverse Basic Chassis, No Controller MAP-380RCH
MAP-300 Modular Controller MAP-300CLD-B
Cassette Extraction Latch Kit – Button MAP-300ACC010
Cassette Extraction Latch Kit – Legacy MAP-300ACC011
Optional Touchscreen 15.6-inch Touchscreen MAP-300AKD
Kits MAP-330A 3 slot Half 19-in 15.6-in Touchscreen
MAP-300AKD-B
Conversion Kit
Rackmount Conversion Kit, MAP-380 MAP-300ACC01
Rackmount Conversion Kit, MAP-330 MAP-300ACC02
Benchtop Conversion Kit MAP-300ACC03
Rackmount Kit. 15.6-in Touchscreen MAP-300ACC04
Protection/Security Retention Bar for MAP-380 Rackmount and Reverse
MAP-300ACC05
Rackmount Mainframes
Hard Case, MAP-330 MAP-300ACC06
Hard Case, MAP-380 MAP-300ACC07
15.6-in Touchscreen Hardcover MAP-300ACC08
15.6-in Touchscreen Screen Protector MAP-300ACC09

10 Third Generation Multiple Application Platform (MAP-300)


LightDirect and LightTest Modular Families for the MAP System
MAP mainframes are the foundation to our entire portfolio of functional modules, enabling scalability and
efficiency for manufacturing optical network elements and modules. The MAP-300 series replaces the highly
successful MAP-200. It is compatible with all our current cassettes and legacy cassette (all -C1, -C2 and -B1
modules). The cassette modules fall into two different families, the LightTest turn-key solutions and LightDirect
configurable solutions to meet each customer’s exact needs.

The LightDirect family includes a wide range of


foundational optical test modules that are used
in simple bench test applications, or combined in
larger, multi-modules customer driven automated
test systems. They are easy-to-control, single-
functionality modules.

Optical Sources and Optical Signal Optical Signal Optical Power and
Amplifiers Conditioning Switching and Routing Spectral Measurements
mTLG-C2 is a distributed mVOA-C1 is the industry’s mOSW-C1/mISW are the mOPM-C1 optical power
feedback (DFB) laser that steps most compact modular industry’s gold standard for loss meters are available with one,
between frequencies of the 50 solution. Available with one, and repeatability. With over 80 two, or four power heads
GHz ITU grid. It is available in two, or four variable optical variations available, there is a per module with four unique
either C or L band, and with up attenuators (VOA) per module configuration ideally suited to performance ranges. There
to four lasers per module. with or without an internal all applications. Switches range are versions available for all
power meter. The mVOA is from 1x4 to 1x64 with options applications. Models with
mSRC-C2 is a general-purpose the industry’s leading variable for internal power monitoring, 110 dBm dynamic range are
light source in key fixed optical attenuator family, direction monitoring, and complimented by versions that
telecom wavelengths: 850, enabling single-level control for power trim. support 26 dBm input power.
1300, 1310, 1490, 1550, 1625 nm. receiver and amplifier testing
for over 20 years. mOSX-C1 is a cross connect mHROSA-A1 is a high-
These sources typically are optical switch that provides resolution optical spectrum
used to test system load or mUTL-C1 is a passive utility high performance and analyzer that combines sub-
continuity, measure insertion module includes, couplers, reliability. Available as a 16- or GHz resolution performance
loss, or for test station splitters, mux/demux, band- 32-port common connection and compact modularity in a
calibration. pass filters and even blank (CC) cassette, the mOSX single slot cassette.
modules for customer supplied supports any-to-any port
mBBS-C1 is a broadband source components. combinations up to the total
that provides an amplified number of ports on the
spontaneous emission (ASE) mPCX-C1 is a polarization cassette. It also supports MxN
output for stable and spectrally scrambler that scrambles, combinations
flattened C-and L-band sources. controls and provides
stabilization for applications
mSRC-C23000SA is a variant such as temporal depolarization
of the mSRC-C2 that behaves and 100G+ coherent interface
as a semiconductor O-band testing.
optical amplifier (SOA) with
polarization-independent mTFX-C1 is a multiport tunable
optical amplifier. filter that simplifies test
signal management for next-
generation 100 G+ interface,
sub-systems and system test.

11 Third Generation Multiple Application Platform (MAP-300)


The LightTest family are application specific, integrated test solutions
that leverage the power of the MAP Series Super-Application or PC based
software. Built with specialized MAP modules or assemblies of LightDirect
modules, LightTest solutions are typically used in bench test applications
but can also be combined in larger, multi-modules customer driven
automated test systems.

Passive Connector Test Solutions


The VIAVI Solutions passive component/connector test solution
(PCT) consists of a powerful family of modules, software, and
peripherals for testing IL, RL, physical length, and polarity of
optical connectivity products. Leveraging the modularity and
connectivity of the VIAVI MAP platforms.

Single Fiber Insertion Loss and Return Loss


Test System
The PCT-rm is a MAP-220 based Single mode Insertion Loss
(IL) and Return Loss (RL) test meter for single fiber connector
applications. Part of the MAP Series PCT solution family, it features
fully EF-compliant multimode Insertion Loss test meters with
connector adapters that can be configured for all connectivity
applications to ensure maximized productivity.

Swept Wavelength System


mSWS-C1 are swept wavelength test solutions for manufacturing
and new device development of passive DWDM devices, ROADMs
& Circuit Packs. Provides full characterization of wavelength.

Optical Component Environmental Test Systems


At the core of OCETS Plus is a pair of custom-grade programmable
switches (1xN configuration). OCETS switches are specified to
higher levels of IL repeatability and background RL than analogue-
grade switches.

Contact Us +1 844 GO VIAVI © 2020 VIAVI Solutions Inc.


(+1 844 468 4284) Product specifications and descriptions in this
document are subject to change without notice.
To reach the VIAVI office nearest you, map300-ds-lab-nse-ae
VIAVI Solutions visit viavisolutions.com/contacts. 30190857 904 0920

viavisolutions.com

You might also like