24/08/2020 Lab Answer Key: Module 2: Implementing DHCP

Lab Answer Key: Module 2: Implementing DHCP

Lab: Implementing DHCP

Exercise 1: Planning the DHCP server implementation

Es
Task 1: Plan theseDynamic
do Host Configuration Protocol (DHCP) server implementation
Nã cu
oé me
pe ladis nto p
rm f
itid otun erten
Based on your answers o r to thea following
ce questions, you will develop a plan for implementing the DHCP server
ea to@
infrastructure. l i za ho a La
rc t ma disl
óp a
ias il.com u N
nã eto
oa .
1. What scopes do you need to create tto u ori enable the IP addressing scheme from module 1?
za
da
s!
Answer: Subnet assignments will vary, but possibilities are:

o Houston: Has 400 potential wired connections and 150 potential wireless connections. Houston will
need two /24 subnets supernetted for the wired connections, and one /24 subnet for the wireless
connections.
Es
se
Houston dowill use 172.16.30.0/24 and 172.16.31.0/24 supernetted for wired connections, and
Nã cu
o
172.16.55.0/24 m
ép lad enfor wireless connections.
erm isfo to pe
itid tun rte
o Mexico City: o r Has at150 nc
potential wired connections and 70 potential wireless connections. Mexico City will
ea
l
o @ ea
use 172.16.35.0/24 i z h
ar forotwired L aconnections, and 172.16.56.0/24 for wireless connections.
có mail disla
pia .co uN
sn m eto
o Portland: Has 175 potential ão wired connections
. and 225 potential wireless connections. Portland will use
au
172.16.40.0/24 for wired connections, tor and 172.16.57.0/24 for wireless connections.
iza
da
Wireless scopes will have a short duration s! of 1 day, and wired scopes will have a duration of 8 days.
2. Where will DNS service come from?

Answer: LON-DC1 will be the Domain Name System (DNS) server for all scopes.

3. How will you get DHCP messages from TOR-SVR1 to the clients in the Houston, Mexico City, and Portland
Es
locations? se d
Nã oc
um
oé l en
Answer:pYou a
erm isconfigure
will
d
f
to
p
DHCP relay agents in the branches.
itid otun erten
or ato ce
4. What configuration eachanges do you need to make to NA-RTR to enable the IP addressing scheme through
liza @ho a La
the DHCP relay? rc tm dis
óp a la
ias il.com u N
nã eto
Answer: You will need to assignothe .
au interfaces IP addresses from their respective branch subnets and
tor
configured as DHCP relay agents. iza
da
s!
5. How will you assign different IP ranges to the clients in each location? How will you assign different IP
addresses for wired and wireless clients?

Answer: You will create multiple scopes on the DHCP server. You will need a separate scope for each wired
and wireless
Es network.
se
do
To distinguish
Nã cu
between wired and wireless requests you will configure the router as a DHCP relay agent for
oé me
l a n
erm disfo to and
the wiredpconnections, p configure the wireless access points as relay agents for wireless requests.
itid tun erte
or a nc
eawill toyou e a to the network interfaces on NA-RTR that are connected to the Houston,
6. What IP addresses liza @hoassign La
r t m
có networks? dis
Mexico City, and Portland pia ail.co lau N
sn m eto
ão .
Answer: You will assign the Houston au interface 172.16.30.1. You will assign the Mexico City interface
tor
172.16.35.1. You will assign the Portland iza interface 172.16.40.1
da
s!
https://www.skillpipe.com/#/reader/book/c1382bd9-db0c-442b-96c6-a397f5c19693 1/9
24/08/2020 Lab Answer Key: Module 2: Implementing DHCP

7. How will you provide for DHCP Failover for TOR-SVR1?

Answer: You will configure a failover relationship with LON-SVR1 as a hot standby DHCP server.

Result: At the completion of this exercise you should have planned the DHCP implementation.

Es
ed s
Exercise
N
2: Implementing
oc the DHCP configuration
ão um
ép laden
erm isf to pe
itid o tu rte
o r nato the
Task 1: Install and configure nc
DHCP
e server role on TOR-SVR1
ea @
liza ho a La
rc t ma d isla
óp
ias il.com u N
nã eto
Install the DHCP server role oa .
uto
riz
ad
as
!
1. On TOR-SVR1, click Start, and then click the Server Manager tile.

2. On the Server Manager dashboard, click Add roles and features.

3. On the Before you begin page, click Next.

Es
se
4. On Nthe Selectdoinstallation
cu type page, click Next.
ão m
ép lad ento
5. On the Select isf
erm destination p server page, click Next.
itid otun erten
or ato c
ea @ ea
lizaroles
6. On the Select server hopage,Laselect DHCP Server.
rc tm dis
óp a la
ias il.com u N
7. In the Add Roles and Features nã Wizard, click eto Add Features, and then click Next.
oa .
uto
riz
8. On the Select features page, click Next. ad
as
!
9. On the DHCP Server page, click Next.

10. On the Confirm installation selections page, click Install.

Es
se The installation will take a few minutes to complete.
Note: do
Nã cu
oé me
pe l a d nto
rm isfot pe
rt
itid u
o r nato ence
ea
l za @ho a La
11. After the installation isucceeds,
rc tm clickdiClose.
sla
óp a
ias il.com u N
nã eto
oa .
Perform the post-installation tasks utoriz
ad
as
!

1. On the top menu bar, click the (orange triangle) Notifications icon, and then click the Complete
DHCPconfiguration link.

2. In the DHCP Post-Install configuration wizard, on the Description page, read the text, and then click Next.
Es
se
3. do
On the Authorization page, click Commit.
Nã cu
oé me
pe ladis nto p
4. Read the textrm on the f Summary page, and then click Close.
itid otun erten
or a c
ea to@ e a
5. In Server Manager, liclick ho
za Tools, La then click Services.
rc tm and dis
óp ail la
ias .com u N
6. Select the DHCP Server service, nã and thenetclick o. the Restart link.
oa
uto
riz
7. Close the Services Microsoft Management ad Console (MMC).
as
!
https://www.skillpipe.com/#/reader/book/c1382bd9-db0c-442b-96c6-a397f5c19693 2/9
24/08/2020 Lab Answer Key: Module 2: Implementing DHCP

Task 2: Configure DHCP scopes for Houston, Mexico City, and Portland

Create the Houston scopes

1. On TOR-SVR1,
Es in Server Manager, click Tools, and then click DHCP.
se
do
2. Nã left pane,cclick
In the um to select TOR-SVR1.adatum.com. This will open the IPv4 node.
oé e
pe ladis nto p
rm fot ert
3. Click to selectitidthe un node.
o r IPv4 ato ence
ea
liza @ho a La
r c Moretm dis
4. In the Actions pane, click óp a Actions,
la and then click New Scope.
ias il.com u N
nã eto
.
5. In the New Scope Wizard, click oNext. au
tor
iza
da
6. On the Scope Name page, in the Name text s! box, type Houston-wired1, and then click Next.

7. On the IP Address Range page, in the Start IP address text box, type 172.16.30.2, and in the End IP
address text box, type 172.16.30.254.

Es
se Note that the subnet mask field fills in automatically to match the default subnet mask for a
Note: d
Nã class Bocaddress
um range.
oé e
pe ladis nto p
rm f
itid otun erten
or a c
ea to@ e a
8. Change the value of the l i z h
ar subnet
o La to 255.255.255.0, and then click Next.
mask
có tmail disla
pia . uN
s n com eto Next.
9. On the Add Exclusions and Delay ão page, click .
au
tor
iza
10. On the Lease Duration page, click Next. da
s!
11. On the Configure DHCP Options page, click Next.

12. On the Router (Default Gateway) page, in the IP address text box, type 172.16.30.1, click Add, and then
click Next.
Es
se
13. On the Domain do Name and DNS Servers page, click Next.
Nã cu
oé me
l a
pe Servers d nto
14. On the WINS rm isfot page, pe click Next.
itid u rt
o r nato ence
15. On the Activate Scope ea @ a L Next, and then click Finish.
liza page,h click
r c otma adisl
óp il.c au
i
16. Repeat steps 4–15 to createasansecond om scope Ne with the following settings:
to.
ão
au
tor
iza
da
s!

o Name: Houston –wired2

o Start IP address: 172.16.31.1
o End IP address: 172.16.31.254
Es
se
do
Nã steps 4–15
17. Repeat cu to create a third scope with the following settings:
oé me
pe l a dis nto p
rm f
itid otun erten
or a c
ea to@ e a
liza ho L
rc tm adis
o Name: Houston-wireless óp ail la
ias .com u N
nã eto
o Start IP address: 172.16.55.2 oa .
uto
o End IP address: 172.16.55.254 izad r
as
!
https://www.skillpipe.com/#/reader/book/c1382bd9-db0c-442b-96c6-a397f5c19693 3/9
24/08/2020 Lab Answer Key: Module 2: Implementing DHCP

o Lease duration: 1 day

o Router (Default Gateway): 172.16.55.1

Create a superscope for Houston wired scopes

1. Right-click the IPv4 node, and then click New Superscope.

2. Es Superscope Wizard, click Next.

In the New se
do
Nã cu
o me
3. On the éSuperscope
l Name page, in the Name text box, type Houston-wired, and then click Next.
pe adis nto p
rm fot ert
iti u en
o r natpage,
4. On the Select dScopes o cpress
e and hold the Ctrl key, click to select [172.16.30.0] Houston-wired1 and
ea @
liza ho a La
[172.16.31.0] Houston-wired2, rc t ma andd isthen click Next.
óp la
ias il.com u N
nã eto
5. On the Completing the New Superscope oa .
Wizard page, click Finish.
uto
riz
ad
as
!
Create the Mexico City scopes

1. Click to select the IPv4 node.

2. In the Actions
Es pane, click More Actions, and then click New Scope.
se
do
N cu
3. In theãoNew
é p Scope
mWizard, click Next.
lad ento
erm isfo pe
tu rt
4. On the ScopeitidName ato enincethe Name text box, type MexicoCity-wired, and then click Next.
o r npage,
ea
liza @ho a La
r c page,tm dis
5. On the IP Address Range óp a in the la Start IP address text box, type 172.16.35.2, and then in the End IP
ias il.com u N
address text box type, 172.16.35.254. nã eto
oa .
uto
riz
6. Change the value of the subnet mask to ad255.255.255.0, and then click Next.
as
!
7. On the Add Exclusions and Delay page, click Next.

8. On the Lease Duration page, click Next.

9. On the Configure
Es DHCP Options page, click Next.
se
do
10. On Nthe cu
ão Router (Defaultm Gateway) page, in the IP address text box, type 172.16.35.1, click Add, and then
ép lad ento
click Next.er
mi isfotu pert
tid
o r nato ence
ea and
11. On the Domain Name liza @hoDNS a LServers page, click Next.
rc tm adis
óp a il.c la
12. On the WINS Servers page, iasclick om u Ne
nã Next. to.
oa
uto
13. On the Activate Scope page, click Next, riz and then click Finish.
ad
as
!
14. Repeat steps 1–13 to create a scope with the following parameters:

o Name:
Es MexicoCity-wireless
se
o Start IP daddress:
oc 172.16.56.2
Nã um
oé la e n 172.16.56.254
o Endp IP address:
erm disfo to pe
o itid
Lease duration: t u day rte
o r n1 a nc
ea to@ e a
o Router (DefaultlizGateway):
ar h o La
172.16.56.1
có tmail disla
pia . uN
s n com eto
ão .
Create the Portland scopes a uto
riz
ad
as
!
https://www.skillpipe.com/#/reader/book/c1382bd9-db0c-442b-96c6-a397f5c19693 4/9
24/08/2020 Lab Answer Key: Module 2: Implementing DHCP

1. Click to select the IPv4 node.

2. In the Actions pane, click More Actions, and then click New Scope.

3. In the New Scope Wizard, click Next.

4. On the Scope Name page, in the Name text box, type Portland-wired, and then click Next.

5. On the IP Address Range page, in the Start IP address text box, type 172.16.40.2, and then in the End IP
addressEtext
ss box, type 172.16.40.254.
ed
Nã oc
um
6. Changeo é the value
l ofe the subnet mask to 255.255.255.0, and then click Next.
pe adis nto p
rm f
itid otun erten
7. On the Add Exclusions
or a andcDelay page, click Next.
ea to@ e a
liza ho L
r tm adis
8. On the Lease Duration cpage, óp ail Next.
click
ias .com u N
la
nã eto
o .
9. On the Configure DHCP Optionsaupage, tor click Next.
iza
da
s
10. On the Router (Default Gateway) page, in !the IP address text box, type 172.16.40.1, click Add, and then
click Next.

11. On the Domain Name and DNS Servers page, click Next.

12. On the WINS

Es Servers page, click Next.
se
do
13. On Nthe Activate cuScope page, click Next, and then click Finish.
ão m
ép lad ento
erm isfo pe
ido tto
14. Repeat stepsit1–13 rte a scope with the following parameters:
un create
a n
rea to@ ce a
liza ho L
rc tm adis
óp ail la
ias .com u N
nã eto
oa .
o Name: Portland-wireless utor
iza
o Start IP address: 172.16.57.2 da
s!
o End IP address: 172.16.57.254
o Lease duration: 1 day
o Router (Default Gateway): 172.16.57.1

Es
se
do
Nã cu
o m
Task 3: Configure
ép ad ento adapters on NA-RTR
lnetwork
erm isfo pe
itid tu rt
o r nato ence
ea
liz @ho a La
1. Switch to NA-RTR. ar có tma disla
pia il.co uN
sn m eto
2. Right-click Start, and then click Networkã o .
Connections.
au
tor
iza
da
3. Right-click the HOU_WAN adapter, and then s! click Properties.

4. Click Internet Protocol Version 4 (TCP/IPv4), and then click Properties.

5. In the InternetProtocolVersion 4 (TCP/IPv4) Properties dialog box, select Use the following IP address.

6. In the IP Eaddress
ss text box, type 172.16.30.1, in the Subnet mask text box, type 255.255.255.0, and then
ed
click
NãOK. oc
um
oé l e
pe a dis nto p
r
7. Click Close.mit f o e
ido tuna rtenc
rea to@ e a
liza ho L
8. Right-click the MEX_WAN tm adand
r c adapter, isla then click Properties.
óp ail
ias .com u N
nã 4 (TCP/IPv4), eto
9. Click Internet Protocol Version oa . and then click Properties.
uto
riz
10. In the Internet Protocol Version 4 (TCP/IPv4) ad Properties dialog box, select Use the following IP address.
as
!
https://www.skillpipe.com/#/reader/book/c1382bd9-db0c-442b-96c6-a397f5c19693 5/9
24/08/2020 Lab Answer Key: Module 2: Implementing DHCP

11. In the IP address text box, type 172.16.35.1, in the Subnet mask text box, type 255.255.255.0.

12. Click OK, and then click Close.

13. Right-click the POR_WAN adapter, and then click Properties.

14. Click Internet Protocol Version 4 (TCP/IPv4), and then click Properties.

15. In the InternetProtocol Version 4 (TCP/IPv4) Properties dialog box, select Use the following IP address:.
Es
se
do
16. In the
Nã IP address cu text box, type 172.16.40.1, in the Subnet mask text box, type 255.255.255.0.
oé me
l
pe adis nto p
rm then f eClose.
17. Click OK, and itid otclick
u rt
o r nato ence
ea @ aL
liza h
r c otma adisl
óp a
ias il.com u N
nã eto
Task 4: Install the DHCP server roleoon .
au LON-SVR1
tor
iza
da
s!
Install the DHCP Server role

1. On LON-SVR1, click Start, and then click the Server Manager tile.
Es
2. On the Server
se Manager dashboard, click Add roles and features.
do
Nã cu
o me
3. On the éBefore
pe l ayou
d begin
nto page, click Next.
rm isfot pe
r
itid u t n
4. o r nato etype
On the Select installation ce page, click Next.
ea @
liza ho a La
rc tm dis
óp server a lau
5. On the Select destination ias il.copage, Nclick Next.
nã m eto
.
oa
6. On the Select server roles page, select uto
riz DHCP Server.
ad
as
!
7. In the Add Roles and Features Wizard, click Add Features, and then click Next.

8. On the Select features page, click Next.

9. On the DHCP Server page, click Next.

Es
se
10. On the Confirm do installation selections page, click Install.
Nã cu
oé me
pe l a d nto
rm isfot p
it d un erten
Note: iThe ato
o r installation cewill take a few minutes to complete.
ea
liza @ho a La
rc tm dis
óp a la
ias il.com u N
nã eto
oa .
uto
11. After the installation succeeds, click Close. riza
da
s!

Perform the post-installation tasks

1. On the top menu bar, click the (orange triangle) Notifications icon, and then click the Complete
Es
DHCPconfiguration link.
se
do
Nã c um
2. In theoDHCP
ép lad ento configuration wizard, on the Description page, read the text, and then click Next.
Post-Install
erm isfo p
itid tun erte
3. On the Authorizationo a
rea page,to ncclick
e Commit.
liza @ho a La
rc tm dis
al
4. Read the text on the Summary óp .co laand
ias ipage, u N then click Close.
nã m eto
.
oa
5. In Server Manager, click Tools, and utothen click Services.
riz
ad
as
!
https://www.skillpipe.com/#/reader/book/c1382bd9-db0c-442b-96c6-a397f5c19693 6/9
24/08/2020 Lab Answer Key: Module 2: Implementing DHCP

6. Select the DHCP Server service, and then click the Restart link.

7. Close the Services MMC.

Task 5: Configure DHCP failover between TOR-SVR1 and LON-SVR1

Es
1. Switch to TOR-SVR1.
se
do
Nã cu
o m
2. ép
In the DHCP lad ento
management console, right-click the IPv4 node, and then click Configure Failover.
erm isfo pe
itid tu rte
o r nto a nc
3. On the Introduction ea toDHCP @ e Failover page, ensure that all scopes are selected, and then click Next.
liza ho a La
rc t ma disl
óp server au for failover page, click Add Server. In the This server text box,
4. On the Specify the partner ias il.comto use Ne
nã to.
type 172.16.0.11, click OK, and then o a click Next.
uto
riz
ad
5. On the Create a new failover relationship as page, click the Mode drop-down list box, click Hot standby, and
!
then set the Maximum Client Lead Time to 1 minute.

Note: This low value is for the purposes of the lab.

Es
se
do
Nã cu
o me
6. ép
In the Shared laSecret n text box, type Pa$$w0rd, click Next, and then click Finish.
erm disfo to pe
itid tun rt
7. In the Configure ato emessage
o rFailover nc
e box, click Close.
ea
liza @ho a La
rc t ma d isla
óp
8. Switch to LON-SVR1. In Server ias iManager,
l.c
om u Neclick Tools, and then click DHCP.
nã to.
oa
9. In the DHCP management console, texpand u ori the IPv4 node, and then note that all of the scopes now display.
za
da
s!

Task 6: Configure DHCP relay on NA-RTR for Houston, Mexico City, and Portland

Es
1. On NA-RTR, se click Start, and then click the Server Manager tile.
do
Nã cu
o m
2. In Server lad enclick
é p Manager, Tools, and then click Routing and Remote Access.
erm isfo to pe
itid t un r ten
o r expanda ce right-click General, and then click New Routing Protocol.
3. Expand NA-RTR, ea to@IPv4,
liza ho a La
rc tm dis
óp ail lau
4. In the New Routing Protocol .co box,
ias dialog Neselect DHCP Relay Agent, and then click OK.
nã m to.
oa
5. Right-click DHCP Relay Agent, andtothen u
riz click Properties.
ad
as
!
6. In the DHCP Relay Agent Properties dialog box, in the Server address box, type 172.16.18.20, and then
click Add. Then type 172.16.0.11, in the Server address box and then click Add and then click OK.

7. Right-click DHCP Relay Agent, and then click New Interface.

8. Es Interface for DHCP Relay Agent, dialog box, click HOU_WAN, and then click OK.
In the New
se
do
N cu
9. In theãoDHCP
ép Relay m
lad eProperties
n – HOU_WAN Properties dialog box, click OK.
erm isfo to pe
i id tu rte
10. Repeat steps t7-9 o rfor nboth
a MEX_WANnc and POR_WAN.
ea to@ e a
liza ho La
rc tm dis
óp a la
ias il.com u N
nã eto
Result: After completing this exercise, o a you should . have you should have implemented your plan for the DHCP
uto
configuration. riz
ad
as
!
https://www.skillpipe.com/#/reader/book/c1382bd9-db0c-442b-96c6-a397f5c19693 7/9
24/08/2020 Lab Answer Key: Module 2: Implementing DHCP

Exercise 3: Validating the DHCP implementation

Task 1: Test DHCP allocation to the correct subnets

1. Switch to LON-CL1.

2. Right-click Start, and then click Network Connections.

Es
se
d
3. Right-click
Nã the oLondon_Network
cu
me adapter, and then click Properties.
oé l
pe adis nto p
rm f
4. itid otun erten
In the London_NetworkProperties dialog box, click Internet Protocol Version 4 (TCP/IPv4), and then click
or a c
Properties. ea to@ e a
liza h L
r c otma adisl
óp i au
5. In the Internet Protocol Version ias l.c4om(TCP/IPv4)
Ne
nã to. Properties dialog box, click Obtain an IP address
oa
automatically, click OK, and then uclick tor Close.
iza
da
6. On the virtual machine menu bar, click the sFile ! menu, and then click Settings.

7. In the left pane, click the Network Adapter connected to London_Network.

8. In the right pane, click the Virtual switch drop-down list box, click HOU_WAN, and then click OK.
Es
9. Right-click sStart,
e d and then click Command Prompt.
Nã oc
um
10. In theoAdministrator:
ép lad entoCommand Prompt window, type the following command, and then press Enter:
erm isfo pe
itid tu rt
o r nato ence
ea
liza @ho a La
Ipconfig /All rc tm dis
óp a la
ias il.com u N
nã eto
oa .
uto
riz
Note: Note that the IP address will ad be 172.16.30.2. The IP address of the DHCP server will be
as
!
172.16.18.20.

11. On the virtual machine menu bar, click the File menu, and then click Settings.

12. In the leftEspane,

se click the Network Adapter connected to HOU_WAN.
do
N c um
13. In theãoright
é p pane, en the Virtual switch drop-down list box, click MEX_WAN, and then click OK. Wait a few
lad click
erm isfo to pe
seconds for the itid change
tu torttake effect.
o r nato ence
ea
liza @ho a La
14. In the Administrator: Command
rc tm Prompt
dis window, type the following command, and then press Enter.
óp a la
ias il.com u N
nã eto
oa .
Ipconfig /All uto
riz
ad
as
!

Note: Note that the IP address will be 172.16.35.2. The IP address of the DHCP server will be
172.16.18.20.

Es
se
15. On Nthe virtualdmachine
oc
um menu bar, click the File menu, and then click Settings.
ão
ép lad ento
16. In the left epane,
rm clickisf p
itid otuntheeNetwork
rt Adapter connected to MEX_WAN.
or ato ence
ea @
17. In the right pane, click lizathe ho a Laswitch drop-down list box, click POR_WAN, and then click OK. Wait a few
r c Virtual
tm
ail
dis
seconds for the change toptake
ó .co lau N
ias effect
nã m eto
.
oa
uto
18. In the Administrator: Command Prompt riz window, type the following command, and then press Enter.
ad
as
!
https://www.skillpipe.com/#/reader/book/c1382bd9-db0c-442b-96c6-a397f5c19693 8/9
24/08/2020 Lab Answer Key: Module 2: Implementing DHCP

Ipconfig /All

Note: Note that the IP address will be 172.16.40.2. The IP address of the DHCP server will be
172.16.18.20.

Es
se
d
Nã DHCP ofailover
Task 2: Test cu
me
oé l
pe adis nto p
rm f
itid otun erten
or a c
1. Switch to TOR-SVR1 ea to@ e a
liza ho L
rc t ma adisl
óp i l.c au
2. In Server Manager, click Tools, ias and o Ne
nã mclick Services. to.
oa
uto
3. Click the DHCP Server service, and then riz click Stop.
ad
as
!
4. Switch to LON-CL1.

5. In the Command Prompt window, type Ipconfig /release, and then press Enter.

6. In the Command Prompt window, type Ipconfig /renew, and then press Enter.
Es
se
7. Type Ipconfigdo/All cu and press Enter
Nã me
oé l nto
pe a d
rm isfot pe
rt
itid u
o r nato ence
Note: Note thatethe ali IP@ DHCP
h aserver
L will now be 172.16.0.11.
za
r c otma adisl
óp a
ias il.com u N
nã eto
oa .
uto
riz
ad
Task 3: Prepare for the next module as
!

When you finish the lab, revert all the virtual machines to their initial state by performing the following steps:

1. Es computer, start Microsoft Hyper-V Manager.

On the host se
do
Nã cu
o m
2. In the Virtual
ép lad ento list, right-click 20741A-LON-DC1, and then click Revert.
Machines
erm isfo p
itid tun erte
3. In the Revert Virtualo a to nce dialog box, click Revert.
rea Machine
liza @ho a La
rc tm dis
4. pia ail.co lau N
Repeat steps 2 and 3 for ó20741A-LON-SVR1, 20741A-LON-CL1, 20741A-TOR-SVR1, 20741A-EU-RTR,
sn m eto
and 20741A-NA-RTR. ão .
au
tor
iza
da
s!
Result: After completing this exercise, you should have tested DHCP IP address allocation to the correct
subnets, and tested DHCP failover.

Es
se
do
Nã cu
o m
ép lad ento
erm isfo pe
itid tu rt
o r nato ence
ea
liza @ho a La
rc tm dis
óp a la
ias il.com u N
nã eto
oa .
uto
riz
ad
as
!
https://www.skillpipe.com/#/reader/book/c1382bd9-db0c-442b-96c6-a397f5c19693 9/9