Scribd
Upload
223 views5 pages

1.4.7 Packet Tracer - Configure Router Interfaces

This document provides instructions for configuring IP addressing and verifying connectivity on two routers and their connected devices. It includes an addressing table with the IP and IPv6 addresses to be configured. The objectives are to configure IPv4 addressing on router R1 and connected devices PC1 and PC2, verify their connectivity; and configure IPv6 addressing on router R2 and devices PC3 and PC4, verifying their connectivity.

Uploaded by

aaron yaguno
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
223 views5 pages

1.4.7 Packet Tracer - Configure Router Interfaces

This document provides instructions for configuring IP addressing and verifying connectivity on two routers and their connected devices. It includes an addressing table with the IP and IPv6 addresses to be configured. The objectives are to configure IPv4 addressing on router R1 and connected devices PC1 and PC2, verify their connectivity; and configure IPv6 addressing on router R2 and devices PC3 and PC4, verifying their connectivity.

Uploaded by

aaron yaguno
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 5

Packet Tracer - Configure Router Interfaces

Addressing Table
Device Interface IP Address/Prefix Default Gateway

R1 G0/0 172.16.20.1 /25 N/A


G0/1 172.16.20.129 /25 N/A
S0/0/0 209.165.200.225 /30 N/A
PC1 NIC 172.16.20.10 /25 172.16.20.1
PC2 NIC 172.16.20.138 /25 172.16.20.129
R2 G0/0 2001:db8:c0de:12::1/64 N/A
G0/1 2001:db8:c0de:13::1/64 N/A
S0/0/1 2001:db8:c0de:11::1/64 N/A
fe80::2 N/A
PC3 NIC 2001:db8:c0de:12::a/64 fe80::2
PC4 NIC 2001:db8:c0de:13::a/64 fe80::2

Objectives
Part 1: Configure IPv4 Addressing and Verify Connectivity
Part 2: Configure IPv6 Addressing and Verify Connectivity

Background
Routers R1 and R2 each have two LANs. Your task is to configure the appropriate addressing on each device and verify
connectivity between the LANs.
Note: The user EXEC password is cisco. The privileged EXEC password is class.

 2013 - 2019 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 1 of 2 www.netacad.com
Instructions

Part 1: Configure IPv4 Addressing and Verify Connectivity


Step 1: Assign IPv4 addresses to R1 and LAN devices.
Referring to the Addressing Table, configure IP addressing for R1 LAN interfaces, PC1 and PC2. The serial interface
has already configured.

 2013 - 2019 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 2 of 2 www.netacad.com
Step 2: Verify connectivity.
PC1 and PC2 should be able to ping each other and the Dual Stack Server.

 2013 - 2019 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 3 of 2 www.netacad.com
Packet Tracer - Configure Router Interfaces

Part 2: Configure IPv6 Addressing and Verify Connectivity


Step 1: Assign IPv6 addresses to R2 and LAN devices.
Referring to the Addressing Table, configure IP addressing for R2 LAN interfaces, PC3 and PC4. The serial
interface is already configured.

 2013 - 2019 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 4 of 2 www.netacad.com
Step 2: Verify connectivity.
PC3 and PC4 should be able to ping each other and the Dual Stack Server.

 2013 - 2019 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 5 of 2 www.netacad.com

You might also like