Scribd Logo
Upload

Welcome to Scribd!

  • 99 views

    Toolbox Safety Talks - Extension Cord Safety (CFC)

    Uploaded by

    Htoo Htoo Kyaw
    Extension cords can be dangerous if misused or improperly maintained. They should be inspected daily for wear and damage and replaced if worn. Cords should be handled gently to avoid damage, kept away from moisture, heat, and chemicals unless rated for those conditions, and not used for improper purposes like lifting tools. When using extension cords, it is important to select the appropriate cord for the job and environment to reduce safety hazards.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Toolbox Safety Talks - Extension Cord Safety (CFC)

    Uploaded by

    Htoo Htoo Kyaw
    99 views2 pages
    Extension cords can be dangerous if misused or improperly maintained. They should be inspected daily for wear and damage and replaced if worn. Cords should be handled gently to avoid damage, kept away from moisture, heat, and chemicals unless rated for those conditions, and not used for improper purposes like lifting tools. When using extension cords, it is important to select the appropriate cord for the job and environment to reduce safety hazards.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Extension cords can be dangerous if misused or improperly maintained. They should be inspected daily for wear and damage and replaced if worn. Cords should be handled gently to avoid damage, kept away from moisture, heat, and chemicals unless rated for those conditions, and not used for improper purposes like lifting tools. When using extension cords, it is important to select the appropriate cord for the job and environment to reduce safety hazards.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    99 views2 pages

    Toolbox Safety Talks - Extension Cord Safety (CFC)

    Uploaded by

    Htoo Htoo Kyaw
    Extension cords can be dangerous if misused or improperly maintained. They should be inspected daily for wear and damage and replaced if worn. Cords should be handled gently to avoid damage, kept away from moisture, heat, and chemicals unless rated for those conditions, and not used for improper purposes like lifting tools. When using extension cords, it is important to select the appropriate cord for the job and environment to reduce safety hazards.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    Toolbox Safety Talks

    Topic – Extension Cord Safety


    Because they are exposed, flexible, and unsecured, extension cords are more susceptible to
    damage than is fixed wiring. Hazards are created when cords, cord connectors, receptacles, and
    cord- and plug-connected equipment are improperly used and maintained. Nothing about an
    extension cord suggests danger - there are no moving parts, no flames and no noise. It is harmless
    looking, yet it can be extremely dangerous if misused.
    Good extension cords should be used all the time - heavy duty rated cords that are approved and
    tested by Underwriter’s Laboratories. Cords that show wear should be repaired or thrown out.
    There are some hazards in using extension cords that only you can control. First of all, no
    extension cord can stand rough usage. If you kink it, knot it or crush it and even bend it, you can
    break the insulation, which may cause a short circuit and a fire or even an electric shock.
    Most cords used carry regular 110-volt electricity. Now, no doubt at some time you have received
    a shock from a 110-volt line without serious harm - just a great tingling sensation. But even a 10-
    volt current can kill. It is not harmless. The conditions, however, must be right. The right
    conditions may consist of making a good connection with a live wire carrying a 110 voltage with
    wet or sweaty hands, and standing or lying on the ground, a wet floor, a water pipe or another
    electrical connection.
    So, protect the extension cords you use. Coil them in large loops, not in close kinked coils. Don’t
    bend them unnecessarily. Don't repair them yourself.
    In special situations, special types of cords are needed. Some cords are water-resistant, others
    are not. Some are insulated for heat resistance; others are designed to stand the action of
    solvents and other chemicals that may be present.
    ➢ To reduce hazards, flexible cords must connect to devices and to fittings in ways that
    prevent tension at joints and terminal screws. Flexible cords are finely
    ➢ stranded for flexibility, so straining a cord can cause the strands of one conductor to
    loosen from under terminal screws and touch another conductor.
    ➢ A flexible cord may be damaged by door or window edges, by staples and fastenings, by
    abrasion from adjacent materials, or simply by aging. If the electrical conductors become
    exposed, there is a danger of shocks, burns, or fire.
    ➢ Extension cords must be 3-wire type so they may be grounded, and to permit grounding
    of any tools or equipment connected to them.
    These rules should be applied for the safe use of extension cords:
    - Inspect all extension cords at the beginning of each workday for any signs of wear or damage.
    Remove any worn or damaged cords from service immediately.
    - Before each use, check the cord for the presence of a ground blade on the male end of the cord.
    Toolbox Safety Talks
    - Handle the cord gently, avoiding strain, kinking, crushing or cutting.
    - String it where it will not be hit or tramped on.
    - If moisture, heat or chemicals are present, be sure your cord is the proper type to resist the
    conditions that are present.
    - Extension cords should not be used as ropes to raise and lower tools and materials.
    DISCUSSION QUESTIONS
    - Where do our tagged and unused tools and extension cords go?
    - Do you know what the proper storage is for extension cords?

    You might also like