MAC™-II Efficiency and Torque Values

PIPE CONNECTION PIPE CONNECTION

Efficiency Minimum Make-Up Torque Efficiency Minimum Make-Up Torque
Size OD Size OD
Wall Comp- Wall Comp-
& Weight L-80/ T-95/ C-110/ & Weight L-80/ T-95/ C-110/
Thickness Tension ression & C-90 Q-125 (Nominal) Thickness Tension ression & C-90 Q-125
(Nominal) N-80 HC-95 P-110 N-80 HC-95 P-110
Bending Bending
Inches Lbs/Ft Inches % % Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs Inches Lbs/Ft Inches % % Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs
5.500 28.40 0.530 75.0 37.5 5200 5700 5900 6600 7300 9.625 64.90 0.672 77.3 38.7 17000 18000 19000 21000 23000
5.500 29.70 0.562 77.8 38.9 6100 6600 6900 7700 8500 9.625 70.30 0.734 78.1 39.1 19000 21000 22000 24000 27000
5.500 32.60 0.625 78.2 39.1 7100 7800 8100 9100 10000 9.625 71.60 0.750 78.5 39.2 20000 22000 23000 25000 28000
5.500 35.30 0.687 76.5 38.3 7600 8300 8600 9600 10700 9.625 75.60 0.797 79.4 39.7 22000 24000 25000 28000 31000
5.500 36.40 0.705 74.9 37.5 7700 8400 8700 9700 10800 9.625 80.80 0.859 79.4 39.7 25000 27000 28000 32000 35000
5.500 38.00 0.750 75.2 37.6 8000 8700 9100 10100 11200 9.625 86.00 0.922 80.2 40.1 28000 31000 32000 36000 40000
5.500 40.50 0.812 74.0 37.0 8300 9100 9400 10500 11600 9.625 91.00 0.984 79.0 39.5 31000 34000 35000 39000 44000
6.625 36.70 0.562 77.1 38.5 7900 8400 8700 9500 10300 9.875 62.80 0.625 75.2 37.6 14500 16000 16000 18000 20000
6.625 40.20 0.625 76.6 38.3 9500 10300 10700 11900 13100 10.750 73.20 0.672 76.4 38.2 19000 20000 21000 24000 26000
6.625 43.70 0.687 76.9 38.5 11500 12400 12900 14200 16000 10.750 75.90 0.700 77.2 38.6 21000 22000 23000 26000 28000
6.625 47.10 0.750 78.1 39.0 12700 13900 14400 16000 18000 10.750 79.20 0.734 78.0 39.0 23000 25000 26000 29000 32000
6.625 50.40 0.812 76.7 38.3 13400 14600 15000 17000 19000 10.750 80.80 0.750 77.9 39.0 24000 26000 27000 30000 33000
6.625 53.70 0.875 75.5 37.7 14000 15000 16000 18000 20000 10.750 85.30 0.797 78.1 39.1 26000 28000 29000 32000 36000
6.625 65.80 1.125 72.4 36.2 16000 18000 19000 21000 23000 10.750 91.20 0.859 79.4 39.7 30000 33000 34000 38000 42000
7.000 41.00 0.590 77.4 38.7 8900 9700 10000 11200 12300 10.750 97.10 0.922 78.2 39.1 34000 37000 38000 42000 47000
7.000 42.70 0.625 78.3 39.2 10100 10900 11400 12600 13900 10.750 102.90 0.984 80.3 40.2 37000 40000 42000 47000 52000
7.000 44.00 0.640 75.7 37.8 9700 10600 11000 12300 13600 10.750 104.30 1.000 75.5 37.8 36000 39000 41000 46000 51000
7.000 45.40 0.670 77.8 38.9 10800 11800 12300 13800 15000 10.750 108.70 1.047 80.2 40.1 39000 43000 44000 50000 55000
7.000 46.40 0.687 78.3 39.1 11300 12400 12900 14400 16000 11.750 87.50 0.734 77.3 38.7 25000 27000 28000 31000 35000
7.000 49.50 0.730 78.9 39.5 12500 13600 14200 16000 18000 11.750 94.00 0.797 78.7 39.3 30000 33000 34000 38000 41000
7.000 50.10 0.750 77.1 38.5 12700 13900 14400 16000 18000 11.750 100.50 0.859 79.3 39.7 34000 37000 38000 43000 47000
7.000 53.60 0.812 77.5 38.8 14300 16000 16000 18000 20000 11.750 107.10 0.922 80.4 40.2 38000 42000 43000 48000 53000
7.000 57.10 0.875 76.2 38.1 14900 16000 17000 19000 21000 11.750 111.50 0.945 79.6 39.8 43000 46000 48000 53000 59000
7.000 60.50 0.937 75.2 37.6 16000 17000 18000 20000 22000 11.750 113.50 0.984 80.3 40.1 42000 46000 47000 53000 59000
7.000 63.90 1.000 74.6 37.3 16000 18000 19000 21000 23000 11.750 119.90 1.047 81.2 40.6 46000 51000 53000 59000 66000
7.625 45.30 0.595 73.9 36.9 10300 11100 11500 12800 14100 12.750 94.20 0.734 77.1 38.6 28000 30000 31000 35000 38000
7.625 47.10 0.625 78.2 39.1 11400 12300 12800 14200 16000 12.750 101.70 0.797 78.6 39.3 34000 37000 38000 42000 46000
7.625 51.20 0.687 77.8 38.9 13000 14100 14700 16000 18000 12.750 109.10 0.859 79.7 39.9 40000 43000 45000 50000 54000
7.625 52.80 0.712 76.3 38.1 13500 14600 15000 17000 19000 12.750 116.50 0.922 79.3 39.6 43000 47000 48000 54000 59000
7.625 55.30 0.750 79.3 39.7 14900 16000 17000 19000 21000 12.750 123.70 0.984 80.2 40.1 49000 53000 55000 61000 67000
7.625 59.20 0.812 79.0 39.5 17000 18000 19000 21000 24000 12.750 130.90 1.047 77.1 38.6 51000 55000 57000 63000 69000
7.625 63.20 0.875 77.6 38.8 19000 20000 21000 24000 26000 12.750 137.90 1.109 81.6 40.8 57000 62000 65000 73000 81000
7.625 66.90 0.937 76.5 38.2 19000 21000 22000 25000 27000
7.625 70.70 1.000 75.6 37.8 20000 22000 23000 26000 28000 13.375 92.50 0.672 75.6 37.8 25000 27000 28000 31000 34000
13.375 100.30 0.734 77.2 38.6 31000 34000 35000 38000 42000
7.750 46.10 0.595 75.1 37.6 10100 11000 11400 12700 14000 13.375 108.10 0.797 77.6 38.8 34000 37000 39000 43000 47000
7.750 48.60 0.640 76.5 38.2 12100 13100 13600 15000 17000 13.375 115.70 0.859 78.8 39.4 41000 44000 46000 51000 56000
8.000 70.80 0.937 76.0 38.0 21000 23000 24000 26000 29000 13.375 123.40 0.922 79.1 39.5 46000 49000 51000 57000 63000
8.063 74.20 0.980 76.0 38.0 23000 25000 26000 29000 32000 13.375 130.80 0.984 80.1 40.0 51000 55000 57000 64000 70000
8.625 54.00 0.625 75.6 37.8 13000 14100 14600 16000 18000 13.375 138.30 1.047 80.5 40.3 57000 62000 64000 72000 79000
8.625
8.625
8.625
58.70
63.50
68.10
0.687
0.750
0.812
77.3
77.8
79.2
38.7
38.9
39.6
16000
18000
20000
17000
20000
22000
18000
21000
23000
20000
23000
26000
22000
25000
29000
13.375 145.60
14.000 99.60
14.000 104.20
1.109
0.700
0.734
79.4
75.6
76.5
39.7
37.8
38.2
60000
29000
32000
65000
31000
35000
68000
32000
36000
75000
35000
40000
83000
39000
43000
MAC™-II
8.625
8.625
72.70
77.10
0.875
0.937
79.4
78.5
39.7
39.3
23000
25000
25000
28000
26000
29000
29000
32000
32000
36000
14.000 112.60
16.000 109.00
0.797
0.656
77.9
66.1
38.9
33.0
39000
28000
42000
30000
43000
30000
48000
33000
52000
36000
Casing Connection
8.625 81.50 1.000 77.5 38.7 28000 30000 31000 35000 39000 16.000 118.00 0.715 73.7 36.9 33000 35000 37000 40000 43000
8.625 83.20 1.025 76.7 38.3 29000 32000 33000 37000 41000 16.000 128.60 0.781 75.5 37.7 39000 42000 43000 47000 51000 BULLETIN 9604-D (REPLACES 9604-C)
9.625 58.40 0.595 69.9 34.9 10900 11900 12300 13700 15000 16.000 137.90 0.843 76.9 38.5 44000 47000 48000 53000 57000
9.625 59.40 0.609 75.6 37.8 13500 14700 15000 17000 19000 16.000 147.30 0.906 78.2 39.1 46000 49000 51000 55000 60000
9.625 61.10 0.625 76.1 38.0 14300 15000 16000 18000 20000
The minimum and target make-up torque values apply to all grades and alloys of steel. Many factors influence torque application.
To ensure minimum torque is attained, Hydril recommends a field target make-up torque (optimum torque) 10% over minimum.
Maximum recommended make-up torque is 20% over minimum make-up torque.

HYDRIL HYDRIL INTERNATIONAL TUBULAR SALES

Houston, Texas Aberdeen, Scotland
Telephone: 281.985.3412 Telephone: +44.1224.299.554
Fax: 281.985.3376 Fax: +44.1224.299.578 R E D E F I N I N G R E L I A B I L I T Y™
E-mail: [email protected] www.hydril.com E-mail: [email protected]
 MAC™-II Features MAC™-II Performance Data
A Heavy Wall Connection for HTHP Production, Tie-back and Intermediate Casing Strings
PIPE CONNECTION MAC-II TENSILE CAPACITY MINIMUM PARTING LOAD
Size OD & Weight Plain- Box Box Threads Critical
(Nominal) Wall ID Make-Up N-80/
End Drift OD ID Per Section L-80 T-95 HC-95 C-110 P-110 Q-125
Thickness (Nominal) Loss C-90
Weight (Turned) (Bored) Inch Area
Inches Lbs/Ft Lbs/Ft Inches Inches Inches Inches Inches Inches Sq In 1000 Lbs 1000 Lbs 1000 Lbs 1000 Lbs 1000 Lbs 1000 Lbs 1000 Lbs
5.500 28.40 28.16 0.530 4.440 4.315 5.716 4.360 4.94 5.00 6.205 589 621 652 683 745 776 838
5.500 29.70 29.67 0.562 4.376 4.251 5.743 4.296 4.94 5.00 6.781 644 678 712 746 814 848 915
5.500 32.60 32.57 0.625 4.250 4.125 5.770 4.170 4.94 5.00 7.490 712 749 786 824 899 936 1011
5.500 35.30 35.35 0.687 4.126 4.001 5.767 4.046 5.75 4.00 7.951 755 795 835 875 954 994 1073
5.500 36.40 36.14 0.705 4.090 3.965 5.766 4.010 5.75 4.00 7.958 756 796 836 875 955 995 1074
5.500 38.00 38.08 0.750 4.000 3.875 5.764 3.920 5.81 4.00 8.418 800 842 884 926 1010 1052 1136
5.500 40.50 40.69 0.812 3.876 3.751 5.761 3.796 6.44 3.50 8.851 841 885 929 974 1062 1106 1195
6.625 36.70 36.43 0.562 5.501 5.376 6.921 5.421 5.00 5.00 8.250 784 825 866 908 990 1031 1114
6.625 40.20 40.09 0.625 5.375 5.250 6.887 5.295 5.75 4.00 9.020 857 902 947 992 1082 1128 1218
6.625 43.70 43.61 0.687 5.251 5.126 6.951 5.171 5.75 4.00 9.860 937 986 1035 1085 1183 1233 1331
Triaxial performance is achieved Field-proven in HTHP wells, 6.625 47.10 47.10 0.750 5.125 5.000 6.948 5.045 5.81 4.00 10.807 1027 1081 1135 1189 1297 1351 1459
PIN 6.625 50.40 50.46 0.812 5.001 4.876 6.945 4.921 6.44 3.50 11.367 1080 1137 1194 1250 1364 1421 1535
by machining pin and box on MAC-II is designed for use on high 6.625 53.70 53.78 0.875 4.875 4.750 6.942 4.795 6.44 3.50 11.931 1133 1193 1253 1312 1432 1491 1611
6.625 65.80 66.14 1.125 4.375 4.250 6.933 4.295 7.38 3.00 14.078 1337 1408 1478 1549 1689 1760 1901
formed ends, creating thickness in performance, heavy wall pipe. 7.000 41.00 40.43 0.590 5.820 5.695 7.259 5.740 5.00 5.00 9.195 874 920 965 1011 1103 1149 1241
the tension critical areas that Thread pitch, height, and diame- 7.000 42.70 42.59 0.625 5.750 5.625 7.300 5.670 5.00 5.00 9.807 932 981 1030 1079 1177 1226 1324
7.000 44.00 43.51 0.640 5.720 5.595 7.270 5.640 5.75 4.00 9.679 920 968 1016 1065 1161 1210 1307
exceed the pipe body thickness. ters are tailored to maximize 7.000 45.40 45.34 0.670 5.660 5.535 7.298 5.580 5.75 4.00 10.368 985 1037 1089 1140 1244 1296 1400
Forming increases both tension strength and balance for each size 7.000 46.40 46.36 0.687 5.626 5.501 7.311 5.546 5.75 4.00 10.664 1013 1066 1120 1173 1280 1333 1440
7.000 49.50 48.93 0.730 5.540 5.415 7.344 5.460 5.81 4.00 11.349 1078 1135 1192 1248 1362 1419 1532
strength and combined load and weight. 7.000 50.10 50.11 0.750 5.500 5.375 7.343 5.420 5.81 4.00 11.349 1078 1135 1192 1248 1362 1419 1532
7.000 53.60 53.71 0.812 5.376 5.251 7.340 5.296 6.44 3.50 12.235 1162 1224 1285 1346 1468 1529 1652
performance. 7.000 57.10 57.29 0.875 5.250 5.125 7.337 5.170 6.44 3.50 12.838 1220 1284 1348 1412 1541 1605 1733
7.000 60.50 60.73 0.937 5.126 5.001 7.334 5.046 7.38 3.00 13.423 1275 1342 1409 1477 1611 1678 1812
Suitability for H2S service is 7.000 63.90 64.14 1.000 5.000 4.875 7.331 4.920 7.38 3.00 14.063 1336 1406 1477 1547 1688 1758 1899
100% pipe body collapse achieved by preventing excessive 7.625 45.30 44.71 0.595 6.435 6.375 7.885 6.400* 5.00 5.00 9.710 922 971 1020 1068 1165 1214 1311
7.625 47.10 46.77 0.625 6.375 6.250 7.921 6.295 5.00 5.00 10.743 1021 1074 1128 1182 1289 1343 1450
strength is provided by the stress levels. Radial clearance in 7.625 51.20 50.95 0.687 6.251 6.126 8.004 6.171 5.81 4.00 11.650 1107 1165 1223 1282 1398 1456 1573
compound pressure energized the threads, along with the posi- 7.625 52.80 52.62 0.712 6.201 6.076 8.003 6.121 5.81 4.00 11.796 1121 1180 1239 1298 1416 1475 1592
7.625 55.30 55.12 0.750 6.125 6.000 8.001 6.045 5.81 4.00 12.847 1220 1285 1349 1413 1542 1606 1734
metal external seal. Differential tive torque stop provided by the 7.625 59.20 59.14 0.812 6.001 5.876 7.998 5.921 6.44 3.50 13.723 1304 1372 1441 1510 1647 1715 1853
7.625 63.20 63.14 0.875 5.875 5.750 7.994 5.795 6.44 3.50 14.407 1369 1441 1513 1585 1729 1801 1945
created between the well bore reverse angle torque shoulder, 7.625 66.90 66.99 0.937 5.751 5.626 7.991 5.671 7.38 3.00 15.051 1430 1505 1580 1656 1806 1881 2032
hydrostatic pressure and atmos- allows strict control of induced 7.625 70.70 70.82 1.000 5.625 5.500 7.989 5.545 7.38 3.00 15.736 1495 1574 1652 1731 1888 1967 2124
7.750 46.10 45.51 0.595 6.560 6.500 8.025 6.530 5.75 4.00 10.046 954 1005 1055 1105 1206 1256 1356
pheric pressure trapped in the stresses. Residual stress created 7.750 48.60 48.64 0.640 6.470 6.375 8.084 6.405 5.75 4.00 10.934 1039 1093 1148 1203 1312 1367 1476
thread annulus magnifies the during forming is removed by 8.000 70.80 70.75 0.937 6.126 6.001 8.386 6.046 7.38 3.00 15.804 1501 1580 1659 1738 1896 1976 2134
8.063 74.20 74.20 0.980 6.103 6.000 8.450 6.045 7.38 3.00 16.570 1574 1657 1740 1823 1988 2071 2237
contact stress on the metal seal, properly stress relieving the affect-
8.625 54.00 53.45 0.625 7.375 7.250 8.884 7.295* 5.81 4.00 11.869 1128 1187 1246 1306 1424 1484 1602
improving seal capability. ed area. 8.625 58.70 58.30 0.687 7.251 7.126 8.970 7.171* 5.81 4.00 13.249 1259 1325 1391 1457 1590 1656 1789
8.625 63.50 63.14 0.750 7.125 7.000 9.054 7.045 5.81 4.00 14.439 1372 1444 1516 1588 1733 1805 1949
8.625 68.10 67.82 0.812 7.001 6.876 9.051 6.921* 6.50 3.50 15.784 1499 1578 1657 1736 1894 1973 2131
Trouble-free make-up on 100% pipe body gas sealing 8.625 72.70 72.49 0.875 6.875 6.750 9.047 6.795 7.38 3.00 16.905 1606 1691 1775 1860 2029 2113 2282
8.625 77.10 77.01 0.937 6.751 6.626 9.044 6.671 7.38 3.00 17.766 1688 1777 1865 1954 2132 2221 2398
even the heaviest pipe weights is reliability is provided by the com- 8.625 81.50 81.51 1.000 6.625 6.500 9.041 6.545 7.38 3.00 18.562 1763 1856 1949 2042 2227 2320 2506
8.625 83.20 83.28 1.025 6.575 6.500 9.075 6.525 7.38 3.00 18.767 1783 1877 1971 2064 2252 2346 2534
ensured by use of rugged, coarse pound pressure energized metal- 9.625 58.40 57.44 0.595 8.435 8.375 9.843 8.400* 5.81 4.00 11.793 1120 1179 1238 1297 1415 1474 1592
pitch threads combined with to-metal internal pressure seal. 9.625 59.40 58.70 0.609 8.407 8.251 9.873 8.327 5.81 4.00 13.033 1238 1303 1368 1434 1564 1629 1759
9.625 61.10 60.13 0.625 8.375 8.219 9.889 8.295 5.81 4.00 13.440 1277 1344 1411 1478 1613 1680 1814
Hydril’s field-proven, deep stab- Pressure-induced radial expan- 9.625 64.90 64.32 0.672 8.281 8.125 9.965 8.201 5.81 4.00 14.620 1389 1462 1535 1608 1754 1828 1974
bing, two-step design. sion of the small diameter step of 9.625 70.30 69.76 0.734 8.157 8.001 10.047 8.077 6.50 3.50 16.017 1522 1602 1682 1762 1922 2002 2162
9.625 71.60 71.16 0.750 8.125 7.969 10.060 8.045 6.50 3.50 16.410 1559 1641 1723 1805 1969 2051 2215
the pin, permitted by radial clear- 9.625 75.60 75.21 0.797 8.031 7.875 10.099 7.951 6.50 3.50 17.558 1668 1756 1844 1931 2107 2195 2370
9.625 80.80 80.50 0.859 7.907 7.751 10.102 7.827 7.38 3.00 18.779 1784 1878 1972 2066 2253 2347 2535
Hooked threads provide high ance in the threads, magnifies the 9.625 86.00 85.78 0.922 7.781 7.625 10.098 7.701 7.38 3.00 20.213 1920 2021 2122 2223 2426 2527 2729
pressure containing contact stress 9.625 91.00 90.89 0.984 7.657 7.501 10.095 7.577 7.44 3.00 21.093 2004 2109 2215 2320 2531 2637 2848
tension strength by resisting the
9.875 62.80 61.80 0.625 8.625 8.500 10.147 8.565* 5.81 4.00 13.655 1297 1366 1434 1502 1639 1707 1843
tendency for radial disengage- on the metal seal. 10.750 73.20 72.40 0.672 9.406 9.250 11.041 9.326 5.81 4.00 16.264 1545 1626 1708 1789 1952 2033 2196
ment, thus improving joint 10.750 75.90 75.20 0.700 9.350 9.194 11.076 9.270 5.81 4.00 17.066 1621 1707 1792 1877 2048 2133 2304
10.750 79.20 78.59 0.734 9.282 9.126 11.131 9.202 5.81 4.00 18.021 1712 1802 1892 1982 2163 2253 2433
strength predictability. Seal saver protects the pin seal 10.750 80.80 80.18 0.750 9.250 9.125 11.157 9.170* 5.81 4.00 18.366 1745 1837 1928 2020 2204 2296 2479
10.750 85.30 84.80 0.797 9.156 9.000 11.139 9.076 7.44 3.00 19.474 1850 1947 2045 2142 2337 2434 2629
from handling damage. Downhole 10.750 91.20 90.83 0.859 9.032 8.876 11.223 8.952 7.44 3.00 21.184 2012 2118 2224 2330 2542 2648 2860
Performance ratings account for tool damage to the face of the pin 10.750 97.10 96.87 0.922 8.906 8.750 11.283 8.826 7.44 3.00 22.257 2114 2226 2337 2448 2671 2782 3005
10.750 102.90 102.73 0.984 8.782 8.626 11.280 8.702 7.50 3.00 24.257 2304 2426 2547 2668 2911 3032 3275
API pipe body dimension varia- is reduced by the generous ID 10.750 104.30 104.23 1.000 8.750 8.594 11.232 8.670 7.44 3.00 23.140 2198 2314 2430 2545 2777 2893 3124
10.750 108.70 108.60 1.047 8.656 8.500 11.276 8.576 7.44 3.00 25.602 2432 2560 2688 2816 3072 3200 3456
tions. Forming done to the pipe in bevel on the pin.
11.750 87.50 86.44 0.734 10.282 10.126 12.097 10.202 6.56 3.50 19.647 1866 1965 2063 2161 2358 2456 2652
Hydril’s plant prior to stress reliev- 11.750 94.00 93.32 0.797 10.156 10.000 12.185 10.076 6.56 3.50 21.580 2050 2158 2266 2374 2590 2698 2913
11.750 100.50 100.01 0.859 10.032 9.876 12.267 9.952 7.44 3.00 23.313 2215 2331 2448 2564 2798 2914 3147
ing and machining ensures rated Streamlined OD in the running 11.750 107.10 106.72 0.922 9.906 9.750 12.320 9.826 7.44 3.00 25.209 2395 2521 2647 2773 3025 3151 3403
performance is attained. and circulating direction virtually 11.750 111.50 109.15 0.945 9.860 9.704 12.336 9.780 7.44 3.00 25.536 2426 2554 2681 2809 3064 3192 3447
11.750 113.50 113.25 0.984 9.782 9.626 12.332 9.702 7.44 3.00 26.713 2538 2671 2805 2938 3206 3339 3606
eliminates downhole hang-up. 11.750 119.90 119.79 1.047 9.656 9.500 12.330 9.576 7.44 3.00 28.590 2716 2859 3002 3145 3431 3574 3860
There is no coupling face to 12.750 94.20 94.28 0.734 11.282 11.126 13.091 11.202 6.56 3.50 21.370 2030 2137 2244 2351 2564 2671 2885
12.750 101.70 101.84 0.797 11.156 11.000 13.185 11.076 6.56 3.50 23.510 2233 2351 2469 2586 2821 2939 3174
interfere with smooth running in 12.750 109.10 109.19 0.859 11.032 10.876 13.285 10.952 6.56 3.50 25.584 2430 2558 2686 2814 3070 3198 3454
12.750 116.50 116.58 0.922 10.906 10.750 13.311 10.826 7.50 3.00 27.153 2580 2715 2851 2987 3258 3394 3666
slim and deviated holes. 12.750 123.70 123.77 0.984 10.782 10.626 13.387 10.702 7.50 3.00 29.182 2772 2918 3064 3210 3502 3648 3940
12.750 130.90 130.99 1.047 10.656 10.500 13.384 10.576 7.50 3.00 29.689 2820 2969 3117 3266 3563 3711 4008
12.750 137.90 138.01 1.109 10.532 10.376 13.379 10.452 7.44 3.00 33.085 3143 3309 3474 3639 3970 4136 4466
U.S. and foreign patents apply. 13.375 92.50 91.25 0.672 12.031 11.875 13.680 11.951 6.56 3.50 20.267 1925 2027 2128 2229 2432 2533 2736
13.375 100.30 99.19 0.734 11.907 11.751 13.759 11.827 6.56 3.50 22.510 2138 2251 2364 2476 2701 2814 3039
13.375 108.10 107.16 0.797 11.781 11.625 13.756 11.701 7.44 3.00 24.425 2320 2443 2565 2687 2931 3053 3297
13.375 115.70 114.93 0.859 11.657 11.501 13.848 11.577 7.44 3.00 26.622 2529 2662 2795 2928 3195 3328 3594
13.375 123.40 122.74 0.922 11.531 11.375 13.936 11.451 7.50 3.00 28.522 2710 2852 2995 3137 3423 3565 3850
BOX 13.375 130.80 130.34 0.984 11.407 11.251 13.991 11.327 7.50 3.00 30.668 2913 3067 3220 3373 3680 3834 4140
13.375 138.30 137.98 1.047 11.281 11.125 14.033 11.201 7.50 3.00 32.662 3103 3266 3430 3593 3919 4083 4409
13.375 145.60 145.42 1.109 11.157 11.001 14.037 11.077 7.50 3.00 33.936 3224 3394 3563 3733 4072 4242 4581
14.000 99.60 99.52 0.700 12.600 12.444 14.306 12.520 6.56 3.50 22.109 2100 2211 2321 2432 2653 2764 2985
14.000 104.20 104.09 0.734 12.532 12.376 14.354 12.452 6.56 3.50 23.397 2223 2340 2457 2574 2808 2925 3159
14.000 112.60 112.49 0.797 12.406 12.250 14.458 12.326 6.56 3.50 25.750 2446 2575 2704 2833 3090 3219 3476
16.000 109.00 107.60 0.656 14.688 14.500 16.706 14.608 7.56 3.00 20.891 1985 2089 2194 2298 2507 2611 2820
16.000 118.00 116.83 0.715 14.570 14.382 16.706 14.490 7.56 3.00 25.312 2405 2531 2658 2784 3037 3164 3417
16.000 128.60 127.06 0.781 14.438 14.250 16.706 14.358 7.56 3.00 28.192 2678 2819 2960 3101 3383 3524 3806
16.000 137.90 136.59 0.843 14.314 14.126 16.706 14.234 7.56 3.00 30.876 2933 3088 3242 3396 3705 3860 4168
16.000 147.30 146.19 0.906 14.188 14.000 16.706 14.108 7.56 3.00 33.579 3190 3358 3526 3694 4029 4197 4533
Tensile capacity calculated on L-80 = 95 ksi, N-80/C-90 = 100 ksi, T-95 = 105 ksi, HC-95 = 110 ksi, C-110 = 120 ksi, P-110 = 125 ksi, Q-125 = 135 ksi ultimate.
©2006 Hydril Company LP All Rights Reserved. * For this item bore will pass popular oversize drift.
] Interchangeable where bracketed.
 MAC™-II Features MAC™-II Performance Data
A Heavy Wall Connection for HTHP Production, Tie-back and Intermediate Casing Strings
PIPE CONNECTION MAC-II TENSILE CAPACITY MINIMUM PARTING LOAD
Size OD & Weight Plain- Box Box Threads Critical
(Nominal) Wall ID Make-Up N-80/
End Drift OD ID Per Section L-80 T-95 HC-95 C-110 P-110 Q-125
Thickness (Nominal) Loss C-90
Weight (Turned) (Bored) Inch Area
Inches Lbs/Ft Lbs/Ft Inches Inches Inches Inches Inches Inches Sq In 1000 Lbs 1000 Lbs 1000 Lbs 1000 Lbs 1000 Lbs 1000 Lbs 1000 Lbs
5.500 28.40 28.16 0.530 4.440 4.315 5.716 4.360 4.94 5.00 6.205 589 621 652 683 745 776 838
5.500 29.70 29.67 0.562 4.376 4.251 5.743 4.296 4.94 5.00 6.781 644 678 712 746 814 848 915
5.500 32.60 32.57 0.625 4.250 4.125 5.770 4.170 4.94 5.00 7.490 712 749 786 824 899 936 1011
5.500 35.30 35.35 0.687 4.126 4.001 5.767 4.046 5.75 4.00 7.951 755 795 835 875 954 994 1073
5.500 36.40 36.14 0.705 4.090 3.965 5.766 4.010 5.75 4.00 7.958 756 796 836 875 955 995 1074
5.500 38.00 38.08 0.750 4.000 3.875 5.764 3.920 5.81 4.00 8.418 800 842 884 926 1010 1052 1136
5.500 40.50 40.69 0.812 3.876 3.751 5.761 3.796 6.44 3.50 8.851 841 885 929 974 1062 1106 1195
6.625 36.70 36.43 0.562 5.501 5.376 6.921 5.421 5.00 5.00 8.250 784 825 866 908 990 1031 1114
6.625 40.20 40.09 0.625 5.375 5.250 6.887 5.295 5.75 4.00 9.020 857 902 947 992 1082 1128 1218
6.625 43.70 43.61 0.687 5.251 5.126 6.951 5.171 5.75 4.00 9.860 937 986 1035 1085 1183 1233 1331
Triaxial performance is achieved Field-proven in HTHP wells, 6.625 47.10 47.10 0.750 5.125 5.000 6.948 5.045 5.81 4.00 10.807 1027 1081 1135 1189 1297 1351 1459
PIN 6.625 50.40 50.46 0.812 5.001 4.876 6.945 4.921 6.44 3.50 11.367 1080 1137 1194 1250 1364 1421 1535
by machining pin and box on MAC-II is designed for use on high 6.625 53.70 53.78 0.875 4.875 4.750 6.942 4.795 6.44 3.50 11.931 1133 1193 1253 1312 1432 1491 1611
6.625 65.80 66.14 1.125 4.375 4.250 6.933 4.295 7.38 3.00 14.078 1337 1408 1478 1549 1689 1760 1901
formed ends, creating thickness in performance, heavy wall pipe. 7.000 41.00 40.43 0.590 5.820 5.695 7.259 5.740 5.00 5.00 9.195 874 920 965 1011 1103 1149 1241
the tension critical areas that Thread pitch, height, and diame- 7.000 42.70 42.59 0.625 5.750 5.625 7.300 5.670 5.00 5.00 9.807 932 981 1030 1079 1177 1226 1324
7.000 44.00 43.51 0.640 5.720 5.595 7.270 5.640 5.75 4.00 9.679 920 968 1016 1065 1161 1210 1307
exceed the pipe body thickness. ters are tailored to maximize 7.000 45.40 45.34 0.670 5.660 5.535 7.298 5.580 5.75 4.00 10.368 985 1037 1089 1140 1244 1296 1400
Forming increases both tension strength and balance for each size 7.000 46.40 46.36 0.687 5.626 5.501 7.311 5.546 5.75 4.00 10.664 1013 1066 1120 1173 1280 1333 1440
7.000 49.50 48.93 0.730 5.540 5.415 7.344 5.460 5.81 4.00 11.349 1078 1135 1192 1248 1362 1419 1532
strength and combined load and weight. 7.000 50.10 50.11 0.750 5.500 5.375 7.343 5.420 5.81 4.00 11.349 1078 1135 1192 1248 1362 1419 1532
7.000 53.60 53.71 0.812 5.376 5.251 7.340 5.296 6.44 3.50 12.235 1162 1224 1285 1346 1468 1529 1652
performance. 7.000 57.10 57.29 0.875 5.250 5.125 7.337 5.170 6.44 3.50 12.838 1220 1284 1348 1412 1541 1605 1733
7.000 60.50 60.73 0.937 5.126 5.001 7.334 5.046 7.38 3.00 13.423 1275 1342 1409 1477 1611 1678 1812
Suitability for H2S service is 7.000 63.90 64.14 1.000 5.000 4.875 7.331 4.920 7.38 3.00 14.063 1336 1406 1477 1547 1688 1758 1899
100% pipe body collapse achieved by preventing excessive 7.625 45.30 44.71 0.595 6.435 6.375 7.885 6.400* 5.00 5.00 9.710 922 971 1020 1068 1165 1214 1311
7.625 47.10 46.77 0.625 6.375 6.250 7.921 6.295 5.00 5.00 10.743 1021 1074 1128 1182 1289 1343 1450
strength is provided by the stress levels. Radial clearance in 7.625 51.20 50.95 0.687 6.251 6.126 8.004 6.171 5.81 4.00 11.650 1107 1165 1223 1282 1398 1456 1573
compound pressure energized the threads, along with the posi- 7.625 52.80 52.62 0.712 6.201 6.076 8.003 6.121 5.81 4.00 11.796 1121 1180 1239 1298 1416 1475 1592
7.625 55.30 55.12 0.750 6.125 6.000 8.001 6.045 5.81 4.00 12.847 1220 1285 1349 1413 1542 1606 1734
metal external seal. Differential tive torque stop provided by the 7.625 59.20 59.14 0.812 6.001 5.876 7.998 5.921 6.44 3.50 13.723 1304 1372 1441 1510 1647 1715 1853
7.625 63.20 63.14 0.875 5.875 5.750 7.994 5.795 6.44 3.50 14.407 1369 1441 1513 1585 1729 1801 1945
created between the well bore reverse angle torque shoulder, 7.625 66.90 66.99 0.937 5.751 5.626 7.991 5.671 7.38 3.00 15.051 1430 1505 1580 1656 1806 1881 2032
hydrostatic pressure and atmos- allows strict control of induced 7.625 70.70 70.82 1.000 5.625 5.500 7.989 5.545 7.38 3.00 15.736 1495 1574 1652 1731 1888 1967 2124
7.750 46.10 45.51 0.595 6.560 6.500 8.025 6.530 5.75 4.00 10.046 954 1005 1055 1105 1206 1256 1356
pheric pressure trapped in the stresses. Residual stress created 7.750 48.60 48.64 0.640 6.470 6.375 8.084 6.405 5.75 4.00 10.934 1039 1093 1148 1203 1312 1367 1476
thread annulus magnifies the during forming is removed by 8.000 70.80 70.75 0.937 6.126 6.001 8.386 6.046 7.38 3.00 15.804 1501 1580 1659 1738 1896 1976 2134
8.063 74.20 74.20 0.980 6.103 6.000 8.450 6.045 7.38 3.00 16.570 1574 1657 1740 1823 1988 2071 2237
contact stress on the metal seal, properly stress relieving the affect-
8.625 54.00 53.45 0.625 7.375 7.250 8.884 7.295* 5.81 4.00 11.869 1128 1187 1246 1306 1424 1484 1602
improving seal capability. ed area. 8.625 58.70 58.30 0.687 7.251 7.126 8.970 7.171* 5.81 4.00 13.249 1259 1325 1391 1457 1590 1656 1789
8.625 63.50 63.14 0.750 7.125 7.000 9.054 7.045 5.81 4.00 14.439 1372 1444 1516 1588 1733 1805 1949
8.625 68.10 67.82 0.812 7.001 6.876 9.051 6.921* 6.50 3.50 15.784 1499 1578 1657 1736 1894 1973 2131
Trouble-free make-up on 100% pipe body gas sealing 8.625 72.70 72.49 0.875 6.875 6.750 9.047 6.795 7.38 3.00 16.905 1606 1691 1775 1860 2029 2113 2282
8.625 77.10 77.01 0.937 6.751 6.626 9.044 6.671 7.38 3.00 17.766 1688 1777 1865 1954 2132 2221 2398
even the heaviest pipe weights is reliability is provided by the com- 8.625 81.50 81.51 1.000 6.625 6.500 9.041 6.545 7.38 3.00 18.562 1763 1856 1949 2042 2227 2320 2506
8.625 83.20 83.28 1.025 6.575 6.500 9.075 6.525 7.38 3.00 18.767 1783 1877 1971 2064 2252 2346 2534
ensured by use of rugged, coarse pound pressure energized metal- 9.625 58.40 57.44 0.595 8.435 8.375 9.843 8.400* 5.81 4.00 11.793 1120 1179 1238 1297 1415 1474 1592
pitch threads combined with to-metal internal pressure seal. 9.625 59.40 58.70 0.609 8.407 8.251 9.873 8.327 5.81 4.00 13.033 1238 1303 1368 1434 1564 1629 1759
9.625 61.10 60.13 0.625 8.375 8.219 9.889 8.295 5.81 4.00 13.440 1277 1344 1411 1478 1613 1680 1814
Hydril’s field-proven, deep stab- Pressure-induced radial expan- 9.625 64.90 64.32 0.672 8.281 8.125 9.965 8.201 5.81 4.00 14.620 1389 1462 1535 1608 1754 1828 1974
bing, two-step design. sion of the small diameter step of 9.625 70.30 69.76 0.734 8.157 8.001 10.047 8.077 6.50 3.50 16.017 1522 1602 1682 1762 1922 2002 2162
9.625 71.60 71.16 0.750 8.125 7.969 10.060 8.045 6.50 3.50 16.410 1559 1641 1723 1805 1969 2051 2215
the pin, permitted by radial clear- 9.625 75.60 75.21 0.797 8.031 7.875 10.099 7.951 6.50 3.50 17.558 1668 1756 1844 1931 2107 2195 2370
9.625 80.80 80.50 0.859 7.907 7.751 10.102 7.827 7.38 3.00 18.779 1784 1878 1972 2066 2253 2347 2535
Hooked threads provide high ance in the threads, magnifies the 9.625 86.00 85.78 0.922 7.781 7.625 10.098 7.701 7.38 3.00 20.213 1920 2021 2122 2223 2426 2527 2729
pressure containing contact stress 9.625 91.00 90.89 0.984 7.657 7.501 10.095 7.577 7.44 3.00 21.093 2004 2109 2215 2320 2531 2637 2848
tension strength by resisting the
9.875 62.80 61.80 0.625 8.625 8.500 10.147 8.565* 5.81 4.00 13.655 1297 1366 1434 1502 1639 1707 1843
tendency for radial disengage- on the metal seal. 10.750 73.20 72.40 0.672 9.406 9.250 11.041 9.326 5.81 4.00 16.264 1545 1626 1708 1789 1952 2033 2196
ment, thus improving joint 10.750 75.90 75.20 0.700 9.350 9.194 11.076 9.270 5.81 4.00 17.066 1621 1707 1792 1877 2048 2133 2304
10.750 79.20 78.59 0.734 9.282 9.126 11.131 9.202 5.81 4.00 18.021 1712 1802 1892 1982 2163 2253 2433
strength predictability. Seal saver protects the pin seal 10.750 80.80 80.18 0.750 9.250 9.125 11.157 9.170* 5.81 4.00 18.366 1745 1837 1928 2020 2204 2296 2479
10.750 85.30 84.80 0.797 9.156 9.000 11.139 9.076 7.44 3.00 19.474 1850 1947 2045 2142 2337 2434 2629
from handling damage. Downhole 10.750 91.20 90.83 0.859 9.032 8.876 11.223 8.952 7.44 3.00 21.184 2012 2118 2224 2330 2542 2648 2860
Performance ratings account for tool damage to the face of the pin 10.750 97.10 96.87 0.922 8.906 8.750 11.283 8.826 7.44 3.00 22.257 2114 2226 2337 2448 2671 2782 3005
10.750 102.90 102.73 0.984 8.782 8.626 11.280 8.702 7.50 3.00 24.257 2304 2426 2547 2668 2911 3032 3275
API pipe body dimension varia- is reduced by the generous ID 10.750 104.30 104.23 1.000 8.750 8.594 11.232 8.670 7.44 3.00 23.140 2198 2314 2430 2545 2777 2893 3124
10.750 108.70 108.60 1.047 8.656 8.500 11.276 8.576 7.44 3.00 25.602 2432 2560 2688 2816 3072 3200 3456
tions. Forming done to the pipe in bevel on the pin.
11.750 87.50 86.44 0.734 10.282 10.126 12.097 10.202 6.56 3.50 19.647 1866 1965 2063 2161 2358 2456 2652
Hydril’s plant prior to stress reliev- 11.750 94.00 93.32 0.797 10.156 10.000 12.185 10.076 6.56 3.50 21.580 2050 2158 2266 2374 2590 2698 2913
11.750 100.50 100.01 0.859 10.032 9.876 12.267 9.952 7.44 3.00 23.313 2215 2331 2448 2564 2798 2914 3147
ing and machining ensures rated Streamlined OD in the running 11.750 107.10 106.72 0.922 9.906 9.750 12.320 9.826 7.44 3.00 25.209 2395 2521 2647 2773 3025 3151 3403
performance is attained. and circulating direction virtually 11.750 111.50 109.15 0.945 9.860 9.704 12.336 9.780 7.44 3.00 25.536 2426 2554 2681 2809 3064 3192 3447
11.750 113.50 113.25 0.984 9.782 9.626 12.332 9.702 7.44 3.00 26.713 2538 2671 2805 2938 3206 3339 3606
eliminates downhole hang-up. 11.750 119.90 119.79 1.047 9.656 9.500 12.330 9.576 7.44 3.00 28.590 2716 2859 3002 3145 3431 3574 3860
There is no coupling face to 12.750 94.20 94.28 0.734 11.282 11.126 13.091 11.202 6.56 3.50 21.370 2030 2137 2244 2351 2564 2671 2885
12.750 101.70 101.84 0.797 11.156 11.000 13.185 11.076 6.56 3.50 23.510 2233 2351 2469 2586 2821 2939 3174
interfere with smooth running in 12.750 109.10 109.19 0.859 11.032 10.876 13.285 10.952 6.56 3.50 25.584 2430 2558 2686 2814 3070 3198 3454
12.750 116.50 116.58 0.922 10.906 10.750 13.311 10.826 7.50 3.00 27.153 2580 2715 2851 2987 3258 3394 3666
slim and deviated holes. 12.750 123.70 123.77 0.984 10.782 10.626 13.387 10.702 7.50 3.00 29.182 2772 2918 3064 3210 3502 3648 3940
12.750 130.90 130.99 1.047 10.656 10.500 13.384 10.576 7.50 3.00 29.689 2820 2969 3117 3266 3563 3711 4008
12.750 137.90 138.01 1.109 10.532 10.376 13.379 10.452 7.44 3.00 33.085 3143 3309 3474 3639 3970 4136 4466
U.S. and foreign patents apply. 13.375 92.50 91.25 0.672 12.031 11.875 13.680 11.951 6.56 3.50 20.267 1925 2027 2128 2229 2432 2533 2736
13.375 100.30 99.19 0.734 11.907 11.751 13.759 11.827 6.56 3.50 22.510 2138 2251 2364 2476 2701 2814 3039
13.375 108.10 107.16 0.797 11.781 11.625 13.756 11.701 7.44 3.00 24.425 2320 2443 2565 2687 2931 3053 3297
13.375 115.70 114.93 0.859 11.657 11.501 13.848 11.577 7.44 3.00 26.622 2529 2662 2795 2928 3195 3328 3594
13.375 123.40 122.74 0.922 11.531 11.375 13.936 11.451 7.50 3.00 28.522 2710 2852 2995 3137 3423 3565 3850
BOX 13.375 130.80 130.34 0.984 11.407 11.251 13.991 11.327 7.50 3.00 30.668 2913 3067 3220 3373 3680 3834 4140
13.375 138.30 137.98 1.047 11.281 11.125 14.033 11.201 7.50 3.00 32.662 3103 3266 3430 3593 3919 4083 4409
13.375 145.60 145.42 1.109 11.157 11.001 14.037 11.077 7.50 3.00 33.936 3224 3394 3563 3733 4072 4242 4581
14.000 99.60 99.52 0.700 12.600 12.444 14.306 12.520 6.56 3.50 22.109 2100 2211 2321 2432 2653 2764 2985
14.000 104.20 104.09 0.734 12.532 12.376 14.354 12.452 6.56 3.50 23.397 2223 2340 2457 2574 2808 2925 3159
14.000 112.60 112.49 0.797 12.406 12.250 14.458 12.326 6.56 3.50 25.750 2446 2575 2704 2833 3090 3219 3476
16.000 109.00 107.60 0.656 14.688 14.500 16.706 14.608 7.56 3.00 20.891 1985 2089 2194 2298 2507 2611 2820
16.000 118.00 116.83 0.715 14.570 14.382 16.706 14.490 7.56 3.00 25.312 2405 2531 2658 2784 3037 3164 3417
16.000 128.60 127.06 0.781 14.438 14.250 16.706 14.358 7.56 3.00 28.192 2678 2819 2960 3101 3383 3524 3806
16.000 137.90 136.59 0.843 14.314 14.126 16.706 14.234 7.56 3.00 30.876 2933 3088 3242 3396 3705 3860 4168
16.000 147.30 146.19 0.906 14.188 14.000 16.706 14.108 7.56 3.00 33.579 3190 3358 3526 3694 4029 4197 4533
Tensile capacity calculated on L-80 = 95 ksi, N-80/C-90 = 100 ksi, T-95 = 105 ksi, HC-95 = 110 ksi, C-110 = 120 ksi, P-110 = 125 ksi, Q-125 = 135 ksi ultimate.
©2006 Hydril Company LP All Rights Reserved. * For this item bore will pass popular oversize drift.
] Interchangeable where bracketed.
MAC™-II Efficiency and Torque Values
PIPE CONNECTION PIPE CONNECTION
Efficiency Minimum Make-Up Torque Efficiency Minimum Make-Up Torque
Size OD Size OD
Wall Comp- Wall Comp-
& Weight L-80/ T-95/ C-110/ & Weight L-80/ T-95/ C-110/
Thickness Tension ression & C-90 Q-125 (Nominal) Thickness Tension ression & C-90 Q-125
(Nominal) N-80 HC-95 P-110 N-80 HC-95 P-110
Bending Bending
Inches Lbs/Ft Inches % % Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs Inches Lbs/Ft Inches % % Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs Ft-Lbs
5.500 28.40 0.530 75.0 37.5 5200 5700 5900 6600 7300 9.625 64.90 0.672 77.3 38.7 17000 18000 19000 21000 23000
5.500 29.70 0.562 77.8 38.9 6100 6600 6900 7700 8500 9.625 70.30 0.734 78.1 39.1 19000 21000 22000 24000 27000
5.500 32.60 0.625 78.2 39.1 7100 7800 8100 9100 10000 9.625 71.60 0.750 78.5 39.2 20000 22000 23000 25000 28000
5.500 35.30 0.687 76.5 38.3 7600 8300 8600 9600 10700 9.625 75.60 0.797 79.4 39.7 22000 24000 25000 28000 31000
5.500 36.40 0.705 74.9 37.5 7700 8400 8700 9700 10800 9.625 80.80 0.859 79.4 39.7 25000 27000 28000 32000 35000
5.500 38.00 0.750 75.2 37.6 8000 8700 9100 10100 11200 9.625 86.00 0.922 80.2 40.1 28000 31000 32000 36000 40000
5.500 40.50 0.812 74.0 37.0 8300 9100 9400 10500 11600 9.625 91.00 0.984 79.0 39.5 31000 34000 35000 39000 44000
6.625 36.70 0.562 77.1 38.5 7900 8400 8700 9500 10300 9.875 62.80 0.625 75.2 37.6 14500 16000 16000 18000 20000
6.625 40.20 0.625 76.6 38.3 9500 10300 10700 11900 13100 10.750 73.20 0.672 76.4 38.2 19000 20000 21000 24000 26000
6.625 43.70 0.687 76.9 38.5 11500 12400 12900 14200 16000 10.750 75.90 0.700 77.2 38.6 21000 22000 23000 26000 28000
6.625 47.10 0.750 78.1 39.0 12700 13900 14400 16000 18000 10.750 79.20 0.734 78.0 39.0 23000 25000 26000 29000 32000
6.625 50.40 0.812 76.7 38.3 13400 14600 15000 17000 19000 10.750 80.80 0.750 77.9 39.0 24000 26000 27000 30000 33000
6.625 53.70 0.875 75.5 37.7 14000 15000 16000 18000 20000 10.750 85.30 0.797 78.1 39.1 26000 28000 29000 32000 36000
6.625 65.80 1.125 72.4 36.2 16000 18000 19000 21000 23000 10.750 91.20 0.859 79.4 39.7 30000 33000 34000 38000 42000
7.000 41.00 0.590 77.4 38.7 8900 9700 10000 11200 12300 10.750 97.10 0.922 78.2 39.1 34000 37000 38000 42000 47000
7.000 42.70 0.625 78.3 39.2 10100 10900 11400 12600 13900 10.750 102.90 0.984 80.3 40.2 37000 40000 42000 47000 52000
7.000 44.00 0.640 75.7 37.8 9700 10600 11000 12300 13600 10.750 104.30 1.000 75.5 37.8 36000 39000 41000 46000 51000
7.000 45.40 0.670 77.8 38.9 10800 11800 12300 13800 15000 10.750 108.70 1.047 80.2 40.1 39000 43000 44000 50000 55000
7.000 46.40 0.687 78.3 39.1 11300 12400 12900 14400 16000 11.750 87.50 0.734 77.3 38.7 25000 27000 28000 31000 35000
7.000 49.50 0.730 78.9 39.5 12500 13600 14200 16000 18000 11.750 94.00 0.797 78.7 39.3 30000 33000 34000 38000 41000
7.000 50.10 0.750 77.1 38.5 12700 13900 14400 16000 18000 11.750 100.50 0.859 79.3 39.7 34000 37000 38000 43000 47000
7.000 53.60 0.812 77.5 38.8 14300 16000 16000 18000 20000 11.750 107.10 0.922 80.4 40.2 38000 42000 43000 48000 53000
7.000 57.10 0.875 76.2 38.1 14900 16000 17000 19000 21000 11.750 111.50 0.945 79.6 39.8 43000 46000 48000 53000 59000
7.000 60.50 0.937 75.2 37.6 16000 17000 18000 20000 22000 11.750 113.50 0.984 80.3 40.1 42000 46000 47000 53000 59000
7.000 63.90 1.000 74.6 37.3 16000 18000 19000 21000 23000 11.750 119.90 1.047 81.2 40.6 46000 51000 53000 59000 66000
7.625 45.30 0.595 73.9 36.9 10300 11100 11500 12800 14100 12.750 94.20 0.734 77.1 38.6 28000 30000 31000 35000 38000
7.625 47.10 0.625 78.2 39.1 11400 12300 12800 14200 16000 12.750 101.70 0.797 78.6 39.3 34000 37000 38000 42000 46000
7.625 51.20 0.687 77.8 38.9 13000 14100 14700 16000 18000 12.750 109.10 0.859 79.7 39.9 40000 43000 45000 50000 54000
7.625 52.80 0.712 76.3 38.1 13500 14600 15000 17000 19000 12.750 116.50 0.922 79.3 39.6 43000 47000 48000 54000 59000
7.625 55.30 0.750 79.3 39.7 14900 16000 17000 19000 21000 12.750 123.70 0.984 80.2 40.1 49000 53000 55000 61000 67000
7.625 59.20 0.812 79.0 39.5 17000 18000 19000 21000 24000 12.750 130.90 1.047 77.1 38.6 51000 55000 57000 63000 69000
7.625 63.20 0.875 77.6 38.8 19000 20000 21000 24000 26000 12.750 137.90 1.109 81.6 40.8 57000 62000 65000 73000 81000
7.625 66.90 0.937 76.5 38.2 19000 21000 22000 25000 27000
7.625 70.70 1.000 75.6 37.8 20000 22000 23000 26000 28000 13.375 92.50 0.672 75.6 37.8 25000 27000 28000 31000 34000
13.375 100.30 0.734 77.2 38.6 31000 34000 35000 38000 42000
7.750 46.10 0.595 75.1 37.6 10100 11000 11400 12700 14000 13.375 108.10 0.797 77.6 38.8 34000 37000 39000 43000 47000
7.750 48.60 0.640 76.5 38.2 12100 13100 13600 15000 17000 13.375 115.70 0.859 78.8 39.4 41000 44000 46000 51000 56000
8.000 70.80 0.937 76.0 38.0 21000 23000 24000 26000 29000 13.375 123.40 0.922 79.1 39.5 46000 49000 51000 57000 63000
8.063 74.20 0.980 76.0 38.0 23000 25000 26000 29000 32000 13.375 130.80 0.984 80.1 40.0 51000 55000 57000 64000 70000
8.625 54.00 0.625 75.6 37.8 13000 14100 14600 16000 18000 13.375 138.30 1.047 80.5 40.3 57000 62000 64000 72000 79000
8.625
8.625
8.625
58.70
63.50
68.10
0.687
0.750
0.812
77.3
77.8
79.2
38.7
38.9
39.6
16000
18000
20000
17000
20000
22000
18000
21000
23000
20000
23000
26000
22000
25000
29000
13.375 145.60
14.000 99.60
14.000 104.20
1.109
0.700
0.734
79.4
75.6
76.5
39.7
37.8
38.2
60000
29000
32000
65000
31000
35000
68000
32000
36000
75000
35000
40000
83000
39000
43000
MAC™-II
8.625
8.625
72.70
77.10
0.875
0.937
79.4
78.5
39.7
39.3
23000
25000
25000
28000
26000
29000
29000
32000
32000
36000
14.000 112.60
16.000 109.00
0.797
0.656
77.9
66.1
38.9
33.0
39000
28000
42000
30000
43000
30000
48000
33000
52000
36000
Casing Connection
8.625 81.50 1.000 77.5 38.7 28000 30000 31000 35000 39000 16.000 118.00 0.715 73.7 36.9 33000 35000 37000 40000 43000
8.625 83.20 1.025 76.7 38.3 29000 32000 33000 37000 41000 16.000 128.60 0.781 75.5 37.7 39000 42000 43000 47000 51000 BULLETIN 9604-D (REPLACES 9604-C)
9.625 58.40 0.595 69.9 34.9 10900 11900 12300 13700 15000 16.000 137.90 0.843 76.9 38.5 44000 47000 48000 53000 57000
9.625 59.40 0.609 75.6 37.8 13500 14700 15000 17000 19000 16.000 147.30 0.906 78.2 39.1 46000 49000 51000 55000 60000
9.625 61.10 0.625 76.1 38.0 14300 15000 16000 18000 20000
The minimum and target make-up torque values apply to all grades and alloys of steel. Many factors influence torque application.
To ensure minimum torque is attained, Hydril recommends a field target make-up torque (optimum torque) 10% over minimum.
Maximum recommended make-up torque is 20% over minimum make-up torque.

HYDRIL HYDRIL INTERNATIONAL TUBULAR SALES

Houston, Texas Aberdeen, Scotland
Telephone: 281.985.3412 Telephone: +44.1224.299.554
Fax: 281.985.3376 Fax: +44.1224.299.578 R E D E F I N I N G R E L I A B I L I T Y™
E-mail: [email protected] www.hydril.com E-mail: [email protected]