The multi-functional Zünd cutter is a flatbed cutting system for footwear patterns that offers high productivity, quality, and flexibility. It uses precision motors, guides, and electronics to cut various materials with speeds up to 1000mm/s and accuracy of 0.02mm. With over 12,000 systems installed worldwide, the Zünd cutter is well-supported by a global sales and service network.
The multi-functional Zünd cutter is a flatbed cutting system for footwear patterns that offers high productivity, quality, and flexibility. It uses precision motors, guides, and electronics to cut various materials with speeds up to 1000mm/s and accuracy of 0.02mm. With over 12,000 systems installed worldwide, the Zünd cutter is well-supported by a global sales and service network.
The multi-functional Zünd cutter is a flatbed cutting system for footwear patterns that offers high productivity, quality, and flexibility. It uses precision motors, guides, and electronics to cut various materials with speeds up to 1000mm/s and accuracy of 0.02mm. With over 12,000 systems installed worldwide, the Zünd cutter is well-supported by a global sales and service network.
The multi-functional Zünd cutter is a flatbed cutting system for footwear patterns that offers high productivity, quality, and flexibility. It uses precision motors, guides, and electronics to cut various materials with speeds up to 1000mm/s and accuracy of 0.02mm. With over 12,000 systems installed worldwide, the Zünd cutter is well-supported by a global sales and service network.
For more than two decades, Zünd has been setting the pace in the development and manufacturing of multifunctional flatbed cutting systems for the footwear-industry More than 12,000 cutters “made in Switzerland” are in operation all over the world – many of them are producing around the clock. Superior speed and acceleration, intelligent tool control, the ability to change cutting parameters any time during cutting, optional material handling and workflow automation are all among the reasons why Zünd is by far the most productive cutting system for patterns /templates available.
Typical benefits include
• increase in productivity at lower cost • elimination of die costs and die production time • consistent high quality and accuracy • optimal material usage, minimal waste • reduced setup time, increased planning and production flexibility • freedom of design, enhanced material and size options a wide range of tool inserts allow cutting of various pattern materials such as cardboard, PVC, pressed wood, sandwich material etc.
tool router Cutting- and plotting head Cutting head with Z-axis Cutting and milling head (for paper and cardboard controlled tangential module with Z-axis controlled tan- up to approx. 300gr/m2) and pen module (for card- gential module. With 150W board and PVC-templates) or 450W milling spindle (for PVC, acrlylic, wood,etc.)
With Zünd you always make the cut
superior cutting and routing quality at unsurpassed productivity
efficient and flexible with intelligent tool management
sturdy, compact, high-tech design upgradeable, adaptable, exchangeable wide range of high-quality knives /blades and router bits unrivaled price-performance ratio and return on investment highest-quality Swiss engineering and construction worldwide service & support organisation Technical Data rugged, welded construction (frame and side-support version)
slip-free steel band drive (patented) with hardened and ground linear guides for superb quality and high precision
all axes with highly dynamic DC-motor drives
knife and service friendly acrylic table top
material hold-down with stepless vacuum system
light-barriers with integrated self test to control the working area
Repeatability +/- 0.02 mm / 0.0008 in. (2XL /3XL-3000 +/- 0,03 mm / 0.0012 in.) Resolution of measuring system 0.005 mm / 0.0002 in. Addressable resolution 0.01 mm / 0.0004 in. Speed 1–1000 mm/s / 0.04–39 in./s max. speed depending on cutter size and tool head Acceleration max. 10 m/s2 / 400 in./s, 1G, depending on cutter size and tool head Max. material thickness standard up to 30 mm (1.18 in.) optional 60 mm (2.36 in.) Interface RS232C / V24, 600…38400 Baud; input buffer 1MB with replot function Software command set: HPGL expanded, data format: ASCII Electronic Control Service-friendly, exchangeable electronic box Air pressure 400l/min. 8 bar for POT Vacuumpumps 1,1 kW, 2,2 kW, 4,0 kW, 8,5 kW, 12,5 kW (further types available on request)
Recommendations of cutter sizes
Width* 800 mm 1300 mm 1800 mm 2200 mm Length* 31 in. 51 in. 71 in. 86.5 in. 800 mm S-800 M-800 31 in. 1200 mm M-1200 L-1200 XL-1200 47 in. 1600 mm LR-1600 M-1600 XL-1600 63 in. LH-1600 2500 mm L-2500 XL-2500 98 in. 3000 mm L-3000 XL-3000 118 in. *Active cutting area may vary depending on the tool head.
Worldwide, accessible, competent
As a supplier of highest-quality cutting systems, Zünd is equally committed to providing first class sales and after-sales support. Zünd is represented by a worldwide sales and service/support network. Local sales and service centers offer complete cutting systems as well as consumables and spare parts for Zünd and Wild plotters/cutters with hotline service for remote diagnostics and local spare parts inventories for maximum responsiveness to customer needs and machine up-time.
Zünd Systemtechnik AG Zund America, Inc. Zünd Asia Ltd.
Industriestrasse 8 5068 W. Ashland Way Rm 911, 28 Hoi Chak Street CH-9450 Altstätten Franklin, WI 53132 Quarry Bay, Hong Kong Tel. +41 71 757 81 00 Tel. +1 414 433 0700 Tel. +852 2561 1812 Fax +41 71 757 81 11 Fax +1 414 433 0800 Fax +852 2564Telford i-Sub House, 4417Way E-Mail: [email protected] Email: [email protected] E-Mail: [email protected] Kettering, Northants, NN16 8UN www.zund.com Tel: 01536 415511 Fax: 01536 482855 DIGITAL www.i-subdigital.com
Illustrations, descriptions, and technical data are not binding and may be changed without prior notice. Zünd precision cutters are manufactured to approval. 09/2007
