Generox™ CSR: A Total Control Program Providing Safe and Economical Disinfection

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

GENEROX™ CSR

A total control program providing safe and


economical disinfection

• Reduced overall cost


• Improved microbiological control
• Reduced energy consumption
• Reduced storage, handling and delivery of chemicals
• Reduced environmental footprint
• Enhanced worker safety
Chlorine dioxide — providing superior disinfection
Solenis has decades of experience using chlorine dioxide There are a number of chemistries available for producing ClO2
(ClO2) as a disinfectant and oxidant in both water and process at customer sites offering various advantages depending on the
treatment applications across a variety of industries. When application. For microbiological control in larger applications,
used as part of a complete treatment program, ClO2 has proven such as cooling towers and once-through systems, Solenis has
to be highly effective in controlling aerobic and anaerobic launched its Generox CSR (concentrated submersible reactor)
microbiological contamination, such as biofilm, legionella, ClO2 generation system.
listeria and spore-forming organisms.

Due to its fast action and lower redox potential, ClO2 can achieve
microbiological control while also providing reduced corrosion
rates. Additionally, the selective oxidizing properties of ClO2 can
lead to a much lower consumption rate compared to traditional
oxidizing disinfectants.

Because ClO2 is active over a broad pH range, it can be used in


a variety of applications including cooling towers, once-through
systems, potable water, process water and wastewater plants.
Many different industries benefit from ClO2 including chemicals
and general manufacturing, food and beverage, commercial
and institutional, pulp and paper, municipal, oil refining, and
power generation.

Photograph courtesy and copyright of Infracor GmbH

Conventional technology versus Generox CSR


PARAMETER CONVENTIONAL TECHNOLOGY GENEROX CSR

Location of CIO2 generation Rooms accessible to people In the water to be treated

Consequence Basic cause for risk potential Feasibility for process optimizations
(CIO2 emission or explosion)
Need for complex safety features and
equipment

CHEMICAL REACTION – REACTOR CONDITIONS

Precursors to be controlled Larger volume of precursors Smaller volume of precursors


plus dilution water without dilution water

CIO2 concentration 20 g/l > 80 g/l

Reaction time Approximately 600 seconds, Approximately 5 seconds,


temperature dependent not temperature dependent

Achievable yield 85-95% > 98%

Reactor volume 8000 ml 16 ml


(1 kg CIO2/h capacity)

Amount of CIO2 present 160 g CIO2 in rooms accessible to people 1.4 g CIO2 in the water to be treated
(1 kg CIO2/h capacity)

Reactor design Closed, frequent pressure vessels Open, reaction zone directly in contact
with process water

DILUTION

Recommended concentration Direct or via intermediate level feeding Direct


e.g. 0.5 ppm tank
New procedure for water treatment with ClO2

Injector
Carrier
Controller water

Water to
be treated/
Dosing treated
pumps water

Reactor

30% 25% Reactor outlet:


Activator Oxidizer CIO2 - concentration <3g/I

Generox CSR System — a proven system for safe and economical disinfection
Solenis’ Generox CSR system utilizes a generator together with completely under water (e.g., in the cooling tower basin, water
activator and oxidizer chemistries to provide a complete, safe tank, etc.). This helps to alleviate virtually any risk of gas leaks
and economical solution for producing ClO2. or explosions, and can minimize costs associated with related
monitoring equipment.
Compared to competitive technologies, the unique reactor
design of the Generox CSR generator delivers significant Additionally, the open reactor design provides for consistent
performance advantages in the areas of safety and monitoring, precursor conversion of more than 98%, which can lead to lower
conversion rates, as well as versatility for use with a variety of chemical consumption (15 to 20% compared to commercial
acids and concentrations. standard) providing customers with improved cost efficiencies.

The Generox CSR generator provides customers with a The Generox CSR generator can utilize sulfuric acid as
safe, effective and economical way to produce up to 50 kg of an alternative precursor which further improves the
ClO2 per hour. potential cost efficiencies by reducing chemical costs, as
well as eliminating the need for additional storage and
Utilizing an innovative, submersible design, the Generox
dosing equipment.
CSR generator enables the reaction and application of ClO2
Solenis
Strong Bonds. Trusted Solutions.
Solenis supplies specialty chemicals for water-intensive industries, including the pulp and paper, oil
and gas, chemical processing, mining, biorefining and power markets. Whether you want to increase
production, develop new products, reduce costs or simply do more with less, we can help. With our
innovative technologies, passionate people and unrivaled experience, Solenis is ready to deliver the
solutions you need.

To learn more, contact your technical sales representative or visit us online.

All statements, information and data presented herein are believed to be accurate and
reliable, but are not to be taken as a guarantee, an express warranty or an implied
warranty of merchantability or fitness for a particular purpose, or representation, Global Headquarters
express or implied, for which Solenis and its subsidiaries assume legal responsibility.
®Registered trademark, Solenis or its subsidiaries, registered in various countries Solenis LLC
™Trademark, Solenis or its subsidiaries, registered in various countries Wilmington, Delaware
*Trademark owned by a third party
©2015, Solenis
Tel: +1 302 594 5000
150084 solenis.com

You might also like