0% found this document useful (0 votes)
132 views2 pages

Semisel - Simulation Software

The document is an online survey from SemiSel, a simulation software tool, asking the user to provide feedback to improve the tool. It describes a buck converter circuit simulation with a SKM600GB066D transistor operating at rated current and overload conditions. The calculated losses and temperatures are shown. The configuration is deemed too powerful, and a SKYPER 32 R or SKHI24 R device is suggested as a better driver. The user is invited to complete a short anonymous online survey to help SemiSel improve the tool.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
132 views2 pages

Semisel - Simulation Software

The document is an online survey from SemiSel, a simulation software tool, asking the user to provide feedback to improve the tool. It describes a buck converter circuit simulation with a SKM600GB066D transistor operating at rated current and overload conditions. The calculated losses and temperatures are shown. The configuration is deemed too powerful, and a SKYPER 32 R or SKHI24 R device is suggested as a better driver. The user is invited to complete a short anonymous online survey to help SemiSel improve the tool.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

22/6/2019 SEMIKRON / SemiSel 4.3.

Legal Information Data Protection Terms of use Help Contact Language

Semisel - Simulation Software

Step By Step Design Ready Assembled Stack Device Proposal Driver Select Tool Version 4.3.1 23/06/2019 User: Guest
Semisel >> Simulation

Survey
Dear user,

We would like to improve our online calculation and simulation tool "SemiSel".

To achieve this goal we would like to invite you to give us your feedback in a short (3-5 minutes) online survey.

In the anonymous survey no personal data (name, IP address etc.) is requested or stored.

Thank you for your support!

Start survey
Project:
Topology DC/DC

Circuit Buck

Circuit:
Vin 534.34 V
Iin 4.90A
fsw 10kHz
Duty Cycle 0.366(x100%)
Vout 195.529V
Iout 13.26A
ton fwd 0.158
Overload factor 1
Overload duration 10s

Device :
Product line SEMITRANS
Device SKM600GB066D
Use maximum values No
Max. junction temparature 175
Transistor Diode
Etr = 37 mJ (@300V) Ed = 25 mJ
VCE0.150 = 0.82 V VT0.150 = 0.87 V
rC.150 = 1.34 mOhm rT.150 = 0.95 mOhm
VCE.sat = 1.62 V Vf = 1.44 V
Ic = 600.00 A If = 600.00 A
Rth(j-c) = 0.08 K/W Rth(j-c) = 0.125 K/W
Rth(c-s) = 0.038 K/W
* - soft turn-off in case of short circuit necessary
Data set from 2013/08/25

Cooling:
Ambient temperature 40 °C
Number of switches per heat sink 1
Number of parallel devices on the same heat sink 1
Additional power source at this heat sink 0
Predefined SK-Heat Sink P14_120
Correction factor 1
Forced Air Cooling, Flow Rate: 85m3/h
Rth(s-a) 0.110K/W

Calculated losses and temperatures with rated current and at overload:


Rated Current Overload
Pcond tr 4.36 W 4.36 W
Psw tr 13 W 13 W
Ptr 17 W 17 W
Pcond d 1.98 W 1.98 W
Psw d 4.32 W 4.32 W
Pd 6.30 W 6.30 W
Ptot 23 W 23 W
Ts 43 °C 43 °C
Tc 43 °C 43 °C
Ttr 45 °C 45 °C
Td 44 °C 44 °C

semisel.semikron.com/DCDCResult.asp 1/2
22/6/2019 SEMIKRON / SemiSel 4.3.1

Evaluation:

This configuration seems to be too powerful.

Device driver suggestion:


Name Iout(av) /mA Îout /A Visol /kV Vce max /V Rgmin / Ohm Channels
1x SKYPER 32 R or SKYPER 32PRO R(1 50 15 4.0 1200 1.5 2
1x SKHI24 R 80 15 4.0 1200 1.5 2

Additional Characteristics at given nominal operation conditions with one free parameter - X:
None selected
Note
1) SKYPER 32 R with external boost capacitors

Change Circuit Circuit parameter Device Parameter Heat Sink Parameter


Printer friendly format Load File Save Project information

semisel.semikron.com/DCDCResult.asp 2/2

You might also like