0% found this document useful (0 votes)
345 views9 pages

GPS Vehicle Tracker: User Manual

This user manual provides instructions for using a GPS vehicle tracker. It describes the components included in the product packaging, specifications and functions of the tracker, and how to set up and operate the device. Common issues that may occur are analyzed, such as insufficient SIM card credit or contact problems, with solutions provided. Users are also informed on how to change the work mode of the tracker via SMS commands for real-time tracking, deep power saving, or smart power saving modes. After-sales service contact information is available for any other support needs.

Uploaded by

Lionel Boopathi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
345 views9 pages

GPS Vehicle Tracker: User Manual

This user manual provides instructions for using a GPS vehicle tracker. It describes the components included in the product packaging, specifications and functions of the tracker, and how to set up and operate the device. Common issues that may occur are analyzed, such as insufficient SIM card credit or contact problems, with solutions provided. Users are also informed on how to change the work mode of the tracker via SMS commands for real-time tracking, deep power saving, or smart power saving modes. After-sales service contact information is available for any other support needs.

Uploaded by

Lionel Boopathi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

GPS Vehicle Tracker

(GPS+GSM+SMS/GPRS)

User Manual
( S15 )

This user manual has been specially designed to guide you through the functions and features
of your GPS vehicle tracker.

1
Content

1. Products Components and PortDefinition................................................................. 3

1.1 ProductIntroduction...................................................................................................3

1.2 Product Configuration List......................................................................................... 3

1.3 Products interface definitions....................................................................................4

1.4 Indicating Led Light....................................................................................................4

2. Specifications and functions.........................................................................................5

2.1 Specifications.............................................................................................................. 5

2.2 Functions.....................................................................................................................6

2.3 Setup and Operation...................................................................................................6

3. Common problem analysis and after-sales services....................................................8

3.1 Common problem analysis.........................................................................................8

3.2 Attention..................................................................................................................... 8

3.3 After-sale service........................................................................................................ 9

2
1. Products Components and Port Definition
1.1 Product Introduction
Name Long Standby GPS Tracker

Type S15

Size L86*W62*H30mm

Vehicle GPS Tracker with 10000MA lithium battery and long standby life time re-chargeable battery
real-time tracking for 1months with magnet outside free installation

1.2 Product Configuration List


Packing List

No Name quantity Unit Remark


1 S15 host 1 Pc
2 Charge cable 1 Pc
3 User manual、warranty card、certification 1 Pc
4 Package box 1 Pc

3
1.3 Products interface definitions

1.4 Indicating Led Light

GSM Indicator (Red)


Flash GSM in the initialization
Slow flash GSM signal is normal
Long bright GPRS on line
Not light Not yet received the GSM signal/not insert SIM card/GSM dormancy

4
GPS Indicator (Yellow)
Flash GPS signal in the search
Long bright GPS has been positioning
Not light GPS dormancy/not working

Charge Lamp
Red Charging
Green Charged

2. Specifications and functions

2.1 Specifications

No Item Specifications

1 Working voltage DC 5V

Motion Model: 46Ma@4v


2 Working current The static current: 7.5mA@4V
power saving mode: 70uA@4V

3 Standby current <3.5uA

4 Size L86*W62*H30MM

5 Location Way GPS

6 Location Accuracy <10 meter

GPRS
7 Communication
GSM: 850/900/1800/1900 MHz

8 Communication way TCP

9 Working temperature -25℃ ~ +75℃

10 Storage temperature -40℃ ~ +85℃

11 Weight 255g

12 Battery capacity 10000mAh

5
2.2 Functions
Function Function Details Function Illustration
According to the set time interval, and compared with a positioning
tracking and
Time track packets on mobile distance is greater than 50 meters back under
positioning
the condition of latitude and longitude location information, etc
Terminal of light by the light to see the light, the light alarm terminal
Light alarm reported. Save electricity after dormancy timing mode light wake
Vehicle state terminal transmission light alert at the meeting.
detection Platform setting maximum speed limit, when the GPS speed is
Speed alarm greater than the set value, then report to over speed alarm to
remind.
Blind spots to fill Terminal positioning and online, data storage, up to 600. Signal
the function normal online upload.
EPO auxiliary
Terminal support EPO auxiliary positioning functions strengthen
positioning
Other Function the positioning effect.
function
When a device change direction angle is greater than a certain
Turning point
angle, immediately upload a location data, the optimal trajectory.
remote upgrade To upgrade the housekeeper remote upgrade.
Terminal set wake up open and back time interval timer, terminal
Low power
Wake up regularly timing starts after entering hibernation, according to the set back
consumption
time to wake up.

2.3 Setup and Operation


2.3.1 Device installation
(1) inspection device
Check whether the equipment appearance is good, fittings is complete.

(2) Install SIM card


Open the device SIM card into the card slot. Please avoid overexertion is damaged, please make sure
that a SIM card with Internet access, only at the same time satisfy the electricity and insert SIM card
terminal can work normally.

(3) The terminal installation position requirements


A. Waterproof: choose place which is not easy to fill the position, kept terminal dry, pay attention to be
far away from the air-conditioning outlet in case of the changes of temperature.Have condensed water
accumulated inside the terminal seriously affect the service life of the product.

B. Shock: terminal can't hang up installed in strong vibration position for a long time.

C. Tamper-proof: terminal should be away from the car video intercom and electronic equipment, such
as to prevent conduction and radiation.
6
2.3.2 SMS remote online Settings
The following message set online format
Text content:<SPBSJ*P:BSJGPS*T:120.025.232.237,7788*A:CMNET*N:13288888888*C:30*3P :
XTTTT>

SPBSJ Message header


*P: BSJGPS password
*T: 120.024.176.195,6695 TCPIP/port
*A: CMNET APN
*N: 13288888888 This number (max: 16)
*C:30 Back time interval,Unit second (3s to 10800s)
Mode setting instruction:
X: 0 Continuous time model 1: Dormancy timing mode
*3P:XTTTT
TTTT: timing time,Unit minute, only effective when X = 1
The minimum setting for 10 mins, the biggest is set to 720 mins.

Change work mode by SMS

Real-time tracking mode <SPBSJ*P:BSJGPS*3P:0>


Deep power saving mode <SPBSJ*P:BSJGPS*3P:110>10 stand for data sending interval
Smart power saving mode <SPBSJ*P:BSJGPS*3P:2>

Noted:
1.Real-time tracking mode: The device has been on line, upload one data if the device move 50m in 3
0s in default. There are turning points and blind area data upload, the trajectory is complete.
2.Deep power-saving mode: Wake up and upload data according to the specified time interval which c
an be set at a range of 10-720 minutes. During other time, vibration can not but the light senser can wa
ke the device up.
3.Smart power-saving mode: Device will be offline after entered the static mode, online when waken
up by vibration.(i.e., online when driving, offline after parking, save more power than real-time tracking
mode. Upload one data if the device move 50m in 30s in default. There are turning points and blind are
a data upload, the trajectory is complete.

7
3. Common problem analysis and after-sales services
3.1 Common problem analysis

Question Reason Solution

SIM Card not enough credit Charge credit

SIM Card contact problem Reinstall SIM card

Reset Parameters with


Online tracking offline Online tracking parameter
correct format according to
setting error
user manual

Vehicle in underground car


parks or tunnels, signal Go to good signal area
weak.

Vehicle in underground car


Leave that area
parks or tunnels
Cannot locate
GPS Antenna Side is not up Make the GPS antenna side
to sky up to sky

3.2 Attention
1 Electronic product please note waterproof.

2 Please keep the backup battery is enough.

3 When the temperature of the environment is more than the normal work of the terminal temperature
range, advice without electricity.

4 When the vehicle in an underground parking lot, tunnel or garage, will influence the positioning
signal. And possible communication network signal blind area lead to equipment can't monitor; after the
vehicle out of the above areas, equipment will automatically return to normal work.

5 In abnormal situation, please do not repair itself. By linking the original attachment or unplug the
connection between the various components damage, manufacturer is not liable.

8
3.3 After-sale service
1. During the one-year warranty, please feel free to contact us if there is any problem or damage not
caused by human factors.

2. Not maintenance:

(1) Client dismantled privately

(2) Force majeure (floods, accidents, etc.)

3. More than one year damage or faulty maintenance will need to pay for raw material.

4. Free to provide customers with the purchase, use, installation and other consultation and technical
services.

You might also like