2.

4G
Wireless Barcode Scanner
 2.4G Wireless Barcode Scanner

Precautions
1. Please read the user manual carefully before using this barcode
scanner.
2. The working voltage of this barcode scanner is 3.3V, charging
voltage 5V. Please use our original USB cable and AC power adapter
to ensure the scanner is working properly.
3. Copyright and Patent Notice Our company reserves the copyright,
software copyright and sufficient patents of the ring
barcode scanner and its accessories(including firmware,MR Configurator,
illustration documents,appearance and so on. )
4. Our company reserves all rights, reserves the right to make any
changes to the product to improve its reliability, function or design.
Our company shall not be liable for applications or use of any
product or circuit with our scanner, or any liability arising therefrom
or in connection with any other applications described herein.
5. Our wireless barcode scanner accessories:
A:standard package: ：barcode scanner (1 piece), WIFI dongle
(1 piece), USB cable (1 piece), user manual (1 piece).
Optional Accessory：Stand
Optional function：Vibration
6. The contents of this manual are subject to change without prior
notice.

1
 2.4G Wireless Barcode Scanner

1.Notice........................................................................................................1
2.Introduction and Features.....................................................................3
3.Application & Execution Standands.....................................................4
4.Working Conditions& Related regulations..........................................5
5.Installation of USB Cable.......................................................................6
6.Reset Configuration to Defaults&Caps Lock Switch.......................7
7.2.4G Pairing Method.............................................................................8
8.Sound and Viberation Setting...............................................................9
9. Sleep Time Setting................................................................................10
10.Language Settings................................................................................11
11.End Character Setting..........................................................................12
12.Transmission Speed Setting................................................................13
13.Operating Mode....................................................................................14-15
14.Hide front and back characters.........................................................16-17
15.Set Prefix and Suffix Setting................................................................18
16.Appendix A.............................................................................................19-29
17. FAQ(Frequently Asked Questions)....................................................30
18.Buzzer ...................................................................................................31
19.Indicator Light State................................................................32

2
 2.4G Wireless Barcode Scanner

Introduction
The series of barcode scanner produced by our company feature as
strong light source，enhanced long-distance scanning technology. It can
read the damaged,stained and poor printed barcode fast under different
ambient light conditions. It is durable in use, since it is protected by
the industrial safty technique.High volume buzzer is another hint of
success scanning besides LED light in the noisy industrial environment.

Features
Wired and wireless dual mode freely switching.
Large capacity storage, safe and reliable.
Stores barcodes more than 50000pcs off-line scanning.
Unique power management system, ultra-long
standby time.
Rich symbologies supported
Adopting imported trigger button, long lifespan,
fitting perfectly in your hand for comfortable use.
Ultra low power consumption and standby time
setup available
Wireless transmission distance：
More than 100m (open area)
Support upload data and charge the battery via
USB cable at the same time.

3
 2.4G Wireless Barcode Scanner

Application
* Applicable to Business (electrical, book, clothing, medicine,
cosmetics, etc.), retail industry, postal service, telecommunications
industry,warehousing, logistics industry, public security system,
customs systems,banking system, medical system.
* Compatible with Microsoft, Android, Linux and other operating
systems and bluetooth protocol
* Support multi-national keyboard language

Scanner Execution Standards

Wireless protocol：2.4G
Memory: 16Mb
Processor: ARM Cortex 32bits
Supported symbologies: 1D: Codabar,Code 11,
Code93,MSI,Code 128,UCC/EAN-128,Code 39,EAN-8,
EAN-13,UPC-A,ISBN,Industrial 25,Interleaved 25,
Standard 25,2/5 Matrix,
2D:QR,DataMatrix,PDF417,Aztec,Hanxin ,
Micro PDF417(option)
Indicator: Led、Buzzer、Vibrator(option)
Battery capacity：1800mA
Charging voltage/current: 5V/1A
Endurance：1D≤24H 2D≤16H（5seconds/scan）
Charge time：
≤4hours
Standby: >30days

4
 2.4G Wireless Barcode Scanner

Working Conditions
Working Temperature： 32°F to 104°F/0°C to 40°C
Storage Temperature： -40°F to 140°F/-40°C to 60°C
Humidity： 5% to 95% relative humidity (no condensation)
Ruggedness: Resist about 6 times drops from 1.5m to concrete ground
Ambient Light Immunity：Under normal office and factory ambient
lighting conditions, or exposed to the sun
won’t take any effect to it.

Electrostatic discharge: In line with 15KV air discharge and

8KV contact discharge requirements

Related Regulations
Electrical safety：In accordance with UL1950、CSA C22.2 No.950、
EN60950/IEC950 EMI/RFI:FCC Part 15 Class B、
European Union EMC Directive、Taiwan EMC、
Environment Terms: In accordance with RoHS directive 2002/95/EEC

5
 2.4G Wireless Barcode Scanner

Installation of Cable
USB Cable Installation sample graph

Each barcode scanner is with one USB cable.，For connection,

please refer to above sample diagram.
Noted: Computer host can charge scanner via USB cable
and USB cable can also be used as a wire to transmit barcodes.
The installation method is as follows:

1.Connect USB cable’s Square Side interface to the bottom

of the scanner;
2.Connect the other side of USB to the computer host.
3.Our barcode scanner features with wireless transmission mode
and USB cable transmission mode. When triggered to wake up,
the scanner will auomatically identify whether the USB cable is
connected. If identify, it will work in USB cable transmission mode,
data transmitted via USB cable; If not, will work in wireless
transmission mode, data transmitted via Bluetooth wireless .

6
 2.4G Wireless Barcode Scanner

Initialization Settings&Version
Information
During usage,if you scan other set-up barcode by mistake and the
scanning cannot perform as normal way, you can scan the initialization
set-up barcode to revert.

Reset Configuration to Defaults Version Information

Caps Lock Switch

Compulsory to Lower Case Compulsory to Capital

No Caps Lock Switch Caps Lock Switch

7
 2.4G Wireless Barcode Scanner

Pairing with 2.4G Dongle：

PC terminals ,like desktop computer, which is not equipped
with bluetooth,need to pair with Dongle,Dongle Pairing Steps
as follow:

A:Scan Dongle Setup Barcode

B:Scan“Compulsory Pair with Dongle Setup Barcode”so that enter

into pairing state.The blue light on the left flickers quickly.

Compulsory Pair with Dongle Setup Barcode

C:Plug the receiver, If pair successfully, you will hear a beep. The blue
light on the right will always be bright.
Note: When the scanner enters the state of matching and it does not
detect the receiver successfully within 1 minute, there is 2 times long
low sound indicated failing match and return to scanning mode.
(Or trigger twice to exit match mode and revert to scanning state)

8
 2.4G Wireless Barcode Scanner

Sound and Vibration Setting

Select the setup barcode you demand

Turn Off the Sound

Turn On the Sound

Turn Off the Vibration(Option)

Turn On the Vibration(Option)

9
 2.4G Wireless Barcode Scanner

Standby Time Setup

Standby after 1 minute Standby after 5 minutes

Standby after 10 minutes Standby after 30 minutes

Never Standby Standby Immediately

10
 2.4G Wireless Barcode Scanner

Language Setup

German French

Italian Japanese

Only apply for PC and output by American Keyboard

11
 2.4G Wireless Barcode Scanner

End Mark Setup

Select the end mark you demand

Add CR Add LF

Add CR+LF Cancel CR+LF

Add TAB

12
 2.4G Wireless Barcode Scanner

Transmission Speed Setup

Select the corresponding transmission speed according to PC
receiving speed.

fast medium

slow super slow

13
 2.4G Wireless Barcode Scanner

Operating Mode
In normal mode, the scans are uploaded directly to computer via
USB cable or wireless connection. If succeeds, barcode scannner will
make a low-frequency short tone. If it fails, there willl be three low
frequency short tones to alarm. In normal mode, if fails, the data
will be lost.

Normal Mode
If the transfer range is beyond Bluetooth wireless transfer range ，
storage mode is suggested, in which scans are stored in internal
storage after being scanned
In storage mode, if a barcode is scanned and the scanner will make
a short tone and scans are automatically stored in scanner's internal
storage.
If the internal storage is full, the scanner will emit three low-frequency
short tones to alarm.

Storage Mode
By scan“Total amount of stored barcode”barcode, to check the total
amount of scanned barcodes in storage:

Total amount of stored barcode

14
 2.4G Wireless Barcode Scanner

Upload the stored data by scanning the "Data Upload" barcode.

After the data is uploaded, the barcode stored in the barcode
scanner won’t be automatically deleted. The user can upload the
stored data multiple times by scanning "Data Upload" barcode.

Data Upload

Note: When uploading data, please ensure the wireless

signal is perfect, or upload after connecting with USB cable
By scanning“Clear Data”to clear the scans in storage, the cleared
scans won't be uploaded once cleared.Please confirm whether the
scans have been uploaded before clear them.

Clear Data

15
 2.4G Wireless Barcode Scanner

Hide front and back characters

A : Scan”Hide front character”or”Hide back character”Setting Barcode

Hide front character Hide back character

B: Scan hide quantity of characters

Hide 1 character Hide 2 characters

Hide 3 characters Hide 4 characters

16
 2.4G Wireless Barcode Scanner

Hide 5 characters Hide 6 characters

Hide 7 characters Hide 8 characters

Note: If you want to cancel“Hide front and back characters”operation,

please scan barcodes of“Hide front character”or”Hide back character”
Setting Barcode again.

17
 2.4G Wireless Barcode Scanner

Set Prefix and Suffix Settings

A : Scan the "Allow for Prefix Adding" or "Allow for Suffix Adding"
setting barcode

Allow for Prefix Adding Allow for Suffix Adding

B : Select the Prefix or Suffix you demand from Appendix A

Note: If you want to cancel Prefix or Suffix Adding operation,please

scan barcodes of“Allow for Prefix Adding”or”Allow for Suffix Adding“
Setting Barcode once more

18
 2.4G Wireless Barcode Scanner

Appendix A:

19
2.4G Wireless Barcode Scanner

20
2.4G Wireless Barcode Scanner

21
2.4G Wireless Barcode Scanner

22
2.4G Wireless Barcode Scanner

23
2.4G Wireless Barcode Scanner

24
2.4G Wireless Barcode Scanner

25
2.4G Wireless Barcode Scanner

26
2.4G Wireless Barcode Scanner

27
2.4G Wireless Barcode Scanner

28
2.4G Wireless Barcode Scanner

29
 2.4G Wireless Barcode Scanner

FAQ
What should I do if I can not pair scanner with Bluetooth
devices?
A.Please make sure that scanner is in the matching state under
corresponding bluetooth protocol
B.If the devices has connected successfully with other barcode scanner via
bluetooth,or other devices.Please delete the bluetooth connection record
before connecting.
C.The wireless module has been damaged
Why some symbologies fail to be read?
The scanning module does not support the symbology or the symbology has
been turned off ，please contact with the vendor to turn on the code system.
Why scans fails to be uploaded to computer or smartphone ?
A. Please make sure if they have been sucessfully paired, if yes, the LED
indicator of the bluetooth barcode scanner is blue.
B. Please check if it is in "Storage Mode". (In "Storage Mode" scans won’t be
uploaded automatically, please scan "Data Upload" setting code manually to
upload the scan is required)
C. Please switch to "Normal Mode" to scan and upload simultaneously.
D.The wireless module has been damaged
Why the barcode content is not correct？
Please make sure that the PC or smartphone keyboard language is the same as
Barcode Scanner language.
Why does the scanner cannot charge？
A.Please select correct charger.
B.The charging circuit or battery has been damaged.
How to change more scanning settings?
Please contact your barcode scanner vendor.

30
 2.4G Wireless Barcode Scanner

Buzzer
Sound Type Description

a long sound
（First low then high frequency ） Means power on
a long sound
（First high then low frequency ） Means power off
a short sound（ low frequency ） Means read barcode
a short sound
（First low then high frequency ） Means data has been stored
a short sound
（First high then low frequency ） Means scan the set-up barcode
a short sound（low frequency ） Means wireless transmission
failed or cache is full

During normal usage or start-up process,if the buzzer continuously

makes five times long sound(low frequency) ,then automatically power
off. It means the power capacity is too low and need to be
charged before use.

31
 2.4G Wireless Barcode Scanner

LED Indicator light

light color Description

two blue lights flicker at the same time Enter into HID pairing state
two blue lights flicker alternately Enter into SPPpairing state
right blue light flicker Enter into BCE pairing state
red light always on Charging state,after full,it will
be off
red light flickers Poor battery contact
green light on and offf immediately Read barcode successfully and
make a short sound

32
Electric Quantity Display